Develop Reference

Jquery click event does not fire after the first click [duplicate]

Can anyone please explain event delegation in JavaScript and how is it useful?

DOM event delegation is a mechanism of responding to ui-events via a single common parent rather than each child, through the magic of event "bubbling" (aka event propagation).
When an event is triggered on an element, the following occurs:
The event is dispatched to its target
EventTarget and any event listeners
found there are triggered. Bubbling
events will then trigger any
additional event listeners found by
following the EventTarget's parent
chain upward, checking for any event
listeners registered on each
successive EventTarget. This upward
propagation will continue up to and
including the Document.
Event bubbling provides the foundation for event delegation in browsers. Now you can bind an event handler to a single parent element, and that handler will get executed whenever the event occurs on any of its child nodes (and any of their children in turn). This is event delegation. Here's an example of it in practice:
<ul onclick="alert(event.type + '!')">
<li>One</li>
<li>Two</li>
<li>Three</li>
</ul>
With that example if you were to click on any of the child <li> nodes, you would see an alert of "click!", even though there is no click handler bound to the <li> you clicked on. If we bound onclick="..." to each <li> you would get the same effect.
So what's the benefit?
Imagine you now have a need to dynamically add new <li> items to the above list via DOM manipulation:
var newLi = document.createElement('li');
newLi.innerHTML = 'Four';
myUL.appendChild(newLi);
Without using event delegation you would have to "rebind" the "onclick" event handler to the new <li> element, in order for it to act the same way as its siblings. With event delegation you don't need to do anything. Just add the new <li> to the list and you're done.
This is absolutely fantastic for web apps with event handlers bound to many elements, where new elements are dynamically created and/or removed in the DOM. With event delegation the number of event bindings can be drastically decreased by moving them to a common parent element, and code that dynamically creates new elements on the fly can be decoupled from the logic of binding their event handlers.
Another benefit to event delegation is that the total memory footprint used by event listeners goes down (since the number of event bindings go down). It may not make much of a difference to small pages that unload often (i.e. user's navigate to different pages often). But for long-lived applications it can be significant. There are some really difficult-to-track-down situations when elements removed from the DOM still claim memory (i.e. they leak), and often this leaked memory is tied to an event binding. With event delegation you're free to destroy child elements without risk of forgetting to "unbind" their event listeners (since the listener is on the ancestor). These types of memory leaks can then be contained (if not eliminated, which is freaking hard to do sometimes. IE I'm looking at you).
Here are some better concrete code examples of event delegation:
How JavaScript Event Delegation Works
Event Delegation versus Event Handling
jQuery.delegate is event delegation + selector specification
jQuery.on uses event delegation when passed a selector as the 2nd parameter
Event delegation without a JavaScript library
Closures vs Event delegation: takes a look at the pros of not converting code to use event delegation
Interesting approach PPK uncovered for delegating the focus and blur events (which do not bubble)

Event delegation allows you to avoid adding event listeners to specific nodes; instead, the event listener is added to one parent. That event listener analyzes bubbled events to find a match on child elements.
JavaScript Example :
Let's say that we have a parent UL element with several child elements:
<ul id="parent-list">
<li id="post-1">Item 1</li>
<li id="post-2">Item 2</li>
<li id="post-3">Item 3</li>
<li id="post-4">Item 4</li>
<li id="post-5">Item 5</li>
<li id="post-6">Item 6</li>
</ul>
Let's also say that something needs to happen when each child element is clicked. You could add a separate event listener to each individual LI element, but what if LI elements are frequently added and removed from the list? Adding and removing event listeners would be a nightmare, especially if addition and removal code is in different places within your app. The better solution is to add an event listener to the parent UL element. But if you add the event listener to the parent, how will you know which element was clicked?
Simple: when the event bubbles up to the UL element, you check the event object's target property to gain a reference to the actual clicked node. Here's a very basic JavaScript snippet which illustrates event delegation:
// Get the element, add a click listener...
document.getElementById("parent-list").addEventListener("click", function(e) {
// e.target is the clicked element!
// If it was a list item
if(e.target && e.target.nodeName == "LI") {
// List item found! Output the ID!
console.log("List item ", e.target.id.replace("post-"), " was clicked!");
}
});
Start by adding a click event listener to the parent element. When the event listener is triggered, check the event element to ensure it's the type of element to react to. If it is an LI element, boom: we have what we need! If it's not an element that we want, the event can be ignored. This example is pretty simple -- UL and LI is a straight-forward comparison. Let's try something more difficult. Let's have a parent DIV with many children but all we care about is an A tag with the classA CSS class:
// Get the parent DIV, add click listener...
document.getElementById("myDiv").addEventListener("click",function(e) {
// e.target was the clicked element
if(e.target && e.target.nodeName == "A") {
// Get the CSS classes
var classes = e.target.className.split(" ");
// Search for the CSS class!
if(classes) {
// For every CSS class the element has...
for(var x = 0; x < classes.length; x++) {
// If it has the CSS class we want...
if(classes[x] == "classA") {
// Bingo!
console.log("Anchor element clicked!");
// Now do something here....
}
}
}
}
});
http://davidwalsh.name/event-delegate

dom event delegation is something different from the computer science definition.
It refers to handling bubbling events from many elements, like table cells, from a parent object, like the table. It can keep the code simpler, especially when adding or removing elements, and saves some memory.

Event delegation is handling an event that bubbles using an event handler on a container element, but only activating the event handler's behavior if the event happened on an element within the container that matches a given condition. This can simplify handling events on elements within the container.
For instance, suppose you want to handle a click on any table cell in a big table. You could write a loop to hook up a click handler to each cell...or you could hook up a click handler on the table and use event delegation to trigger it only for table cells (and not table headers, or the whitespace within a row around cells, etc.).
It's also useful when you're going to be adding and removing elements from the container, because you don't have to worry about adding and removing event handlers on those elements; just hook the event on the container and handle the event when it bubbles.
Here's a simple example (it's intentionally verbose to allow for inline explanation): Handling a click on any td element in a container table:
// Handle the event on the container
document.getElementById("container").addEventListener("click", function(event) {
// Find out if the event targeted or bubbled through a `td` en route to this container element
var element = event.target;
var target;
while (element && !target) {
if (element.matches("td")) {
// Found a `td` within the container!
target = element;
} else {
// Not found
if (element === this) {
// We've reached the container, stop
element = null;
} else {
// Go to the next parent in the ancestry
element = element.parentNode;
}
}
}
if (target) {
console.log("You clicked a td: " + target.textContent);
} else {
console.log("That wasn't a td in the container table");
}
});
table {
border-collapse: collapse;
border: 1px solid #ddd;
}
th, td {
padding: 4px;
border: 1px solid #ddd;
font-weight: normal;
}
th.rowheader {
text-align: left;
}
td {
cursor: pointer;
}
<table id="container">
<thead>
<tr>
<th>Language</th>
<th>1</th>
<th>2</th>
<th>3</th>
</tr>
</thead>
<tbody>
<tr>
<th class="rowheader">English</th>
<td>one</td>
<td>two</td>
<td>three</td>
</tr>
<tr>
<th class="rowheader">Español</th>
<td>uno</td>
<td>dos</td>
<td>tres</td>
</tr>
<tr>
<th class="rowheader">Italiano</th>
<td>uno</td>
<td>due</td>
<td>tre</td>
</tr>
</tbody>
</table>
Before going into the details of that, let's remind ourselves how DOM events work.
DOM events are dispatched from the document to the target element (the capturing phase), and then bubble from the target element back to the document (the bubbling phase). This graphic in the old DOM3 events spec (now superceded, but the graphic's still valid) shows it really well:
Not all events bubble, but most do, including click.
The comments in the code example above describe how it works. matches checks to see if an element matches a CSS selector, but of course you can check for whether something matches your criteria in other ways if you don't want to use a CSS selector.
That code is written to call out the individual steps verbosely, but on vaguely-modern browsers (and also on IE if you use a polyfill), you can use closest and contains instead of the loop:
var target = event.target.closest("td");
console.log("You clicked a td: " + target.textContent);
} else {
console.log("That wasn't a td in the container table");
}
Live Example:
// Handle the event on the container
document.getElementById("container").addEventListener("click", function(event) {
var target = event.target.closest("td");
if (target && this.contains(target)) {
console.log("You clicked a td: " + target.textContent);
} else {
console.log("That wasn't a td in the container table");
}
});
table {
border-collapse: collapse;
border: 1px solid #ddd;
}
th, td {
padding: 4px;
border: 1px solid #ddd;
font-weight: normal;
}
th.rowheader {
text-align: left;
}
td {
cursor: pointer;
}
<table id="container">
<thead>
<tr>
<th>Language</th>
<th>1</th>
<th>2</th>
<th>3</th>
</tr>
</thead>
<tbody>
<tr>
<th class="rowheader">English</th>
<td>one</td>
<td>two</td>
<td>three</td>
</tr>
<tr>
<th class="rowheader">Español</th>
<td>uno</td>
<td>dos</td>
<td>tres</td>
</tr>
<tr>
<th class="rowheader">Italiano</th>
<td>uno</td>
<td>due</td>
<td>tre</td>
</tr>
</tbody>
</table>
closest checks the element you call it on to see if it matches the given CSS selector and, if it does, returns that same element; if not, it checks the parent element to see if it matches, and returns the parent if so; if not, it checks the parent's parent, etc. So it finds the "closest" element in the ancestor list that matches the selector. Since that might go past the container element, the code above uses contains to check that if a matching element was found, it's within the container — since by hooking the event on the container, you've indicated you only want to handle elements within that container.
Going back to our table example, that means that if you have a table within a table cell, it won't match the table cell containing the table:
// Handle the event on the container
document.getElementById("container").addEventListener("click", function(event) {
var target = event.target.closest("td");
if (target && this.contains(target)) {
console.log("You clicked a td: " + target.textContent);
} else {
console.log("That wasn't a td in the container table");
}
});
table {
border-collapse: collapse;
border: 1px solid #ddd;
}
th, td {
padding: 4px;
border: 1px solid #ddd;
font-weight: normal;
}
th.rowheader {
text-align: left;
}
td {
cursor: pointer;
}
<!-- The table wrapped around the #container table -->
<table>
<tbody>
<tr>
<td>
<!-- This cell doesn't get matched, thanks to the `this.contains(target)` check -->
<table id="container">
<thead>
<tr>
<th>Language</th>
<th>1</th>
<th>2</th>
<th>3</th>
</tr>
</thead>
<tbody>
<tr>
<th class="rowheader">English</th>
<td>one</td>
<td>two</td>
<td>three</td>
</tr>
<tr>
<th class="rowheader">Español</th>
<td>uno</td>
<td>dos</td>
<td>tres</td>
</tr>
<tr>
<th class="rowheader">Italiano</th>
<td>uno</td>
<td>due</td>
<td>tre</td>
</tr>
</tbody>
</table>
</td>
<td>
This is next to the container table
</td>
</tr>
</tbody>
</table>

The delegation concept
If there are many elements inside one parent, and you want to handle events on them of them - don’t bind handlers to each element.
Instead, bind the single handler to their parent, and get the child from event.target.
This site provides useful info about how to implement event delegation.
http://javascript.info/tutorial/event-delegation

To understand event delegation first we need to know why and when we actually need or want event delegation.
There may be many cases but let's discuss two big use cases for event delegation.
1. The first case is when we have an element with lots of child elements that we are interested in. In this case, instead of adding an event handler to all of these child elements, we simply add it to the parent element and then determine on which child element the event was fired.
2.The second use case for event delegation is when we want an event handler attached to an element that is not yet in the DOM when our page is loaded. That's, of course, because we cannot add an event handler to something that's not on our page, so in a case of deprecation that we're coding.
Suppose you have a list of 0, 10, or 100 items in the DOM when you load your page, and more items are waiting in your hand to add in the list. So there is no way to attach an event handler for the future elements or those elements are not added in the DOM yet, and also there may be a lot of items, so it wouldn't be useful to have one event handler attached to each of them.
Event Delegation
All right, so in order to talk about event delegation, the first concept that we actually need to talk about is event bubbling.
Event bubbling:
Event bubbling means that when an event is fired or triggered on some DOM element, for example by clicking on our button here on the bellow image, then the exact same event is also triggered on all of the parent elements.
The event is first fired on the button, but then it will also be fired on all the parent elements one at a time, so it will also fire on the paragraph to the section the main element and actually all the way up in a DOM tree until the HTML element which is the root. So we say that the event bubbles up inside the DOM tree, and that's why it's called bubbling.
Target element: The element on which the event was actually first fired called the target element, so the element that caused the event to happen, is called the target element. In our above example here it's, of course, the button that was clicked. The important part is that this target element is stored as a property in the event object, This means that all the parent elements on which the event will also fire will know the target element of the event, so where the event was first fired.
That brings us to event delegation because if the event bubbles up in the DOM tree, and if we know where the event was fired then we can simply attach an event handler to a parent element and wait for the event to bubble up, and we can then do whatever we intended to do with our target element. This technique is called event delegation. In this example here, we could simply add the event handler
to the main element.
All right, so again, event delegation is to not set up the event handler on the original element that we're interested in but to attach it to a parent element and, basically, catch the event there because it bubbles up. We can then act on the element that we're interested in using the target element property.
Example:
Now lets assume we have two list item in our page, after adding items in those list programmtically we want to delete one or more items from them. Using event delegation tecnique we can achive our ppurpose easily.
<div class="body">
<div class="top">
</div>
<div class="bottom">
<div class="other">
<!-- other bottom elements -->
</div>
<div class="container clearfix">
<div class="income">
<h2 class="icome__title">Income</h2>
<div class="income__list">
<!-- list items -->
</div>
</div>
<div class="expenses">
<h2 class="expenses__title">Expenses</h2>
<div class="expenses__list">
<!-- list items -->
</div>
</div>
</div>
</div>
</div>
Adding items in those list:
const DOMstrings={
type:{
income:'inc',
expense:'exp'
},
incomeContainer:'.income__list',
expenseContainer:'.expenses__list',
container:'.container'
}
var addListItem = function(obj, type){
//create html string with the place holder
var html, element;
if(type===DOMstrings.type.income){
element = DOMstrings.incomeContainer
html = `<div class="item clearfix" id="inc-${obj.id}">
<div class="item__description">${obj.descripiton}</div>
<div class="right clearfix">
<div class="item__value">${obj.value}</div>
<div class="item__delete">
<button class="item__delete--btn"><i class="ion-ios-close-outline"></i></button>
</div>
</div>
</div>`
}else if (type ===DOMstrings.type.expense){
element=DOMstrings.expenseContainer;
html = ` <div class="item clearfix" id="exp-${obj.id}">
<div class="item__description">${obj.descripiton}</div>
<div class="right clearfix">
<div class="item__value">${obj.value}</div>
<div class="item__percentage">21%</div>
<div class="item__delete">
<button class="item__delete--btn"><i class="ion-ios-close-outline"></i></button>
</div>
</div>
</div>`
}
var htmlObject = document.createElement('div');
htmlObject.innerHTML=html;
document.querySelector(element).insertAdjacentElement('beforeend', htmlObject);
}
Delete items:
var ctrlDeleteItem = function(event){
// var itemId = event.target.parentNode.parentNode.parentNode.parentNode.id;
var parent = event.target.parentNode;
var splitId, type, ID;
while(parent.id===""){
parent = parent.parentNode
}
if(parent.id){
splitId = parent.id.split('-');
type = splitId[0];
ID=parseInt(splitId[1]);
}
deleteItem(type, ID);
deleteListItem(parent.id);
}
var deleteItem = function(type, id){
var ids, index;
ids = data.allItems[type].map(function(current){
return current.id;
});
index = ids.indexOf(id);
if(index>-1){
data.allItems[type].splice(index,1);
}
}
var deleteListItem = function(selectorID){
var element = document.getElementById(selectorID);
element.parentNode.removeChild(element);
}

Delegation is a technique where an object expresses certain behavior to the outside but in reality delegates responsibility for implementing that behaviour to an associated object. This sounds at first very similar to the proxy pattern, but it serves a much different purpose. Delegation is an abstraction mechanism which centralizes object (method) behavior.
Generally spoken: use delegation as alternative to inheritance. Inheritance is a good strategy, when a close relationship exist in between parent and child object, however, inheritance couples objects very closely. Often, delegation is the more flexible way to express a relationship between classes.
This pattern is also known as "proxy chains". Several other design patterns use delegation - the State, Strategy and Visitor Patterns depend on it.

Event delegation makes use of two often overlooked features of JavaScript events: event bubbling and the target element.When an event is triggered on an element, for example a mouse click on a button, the same event is also triggered on all of that element’s ancestors. This process is known as event bubbling; the event bubbles up from the originating element to the top of the DOM tree.
Imagine an HTML table with 10 columns and 100 rows in which you want something to happen when the user clicks on a table cell. For example, I once had to make each cell of a table of that size editable when clicked. Adding event handlers to each of the 1000 cells would be a major performance problem and, potentially, a source of browser-crashing memory leaks. Instead, using event delegation, you would add only one event handler to the table element, intercept the click event and determine which cell was clicked.

It's basically how association is made to the element. .click applies to the current DOM, while .on (using delegation) will continue to be valid for new elements added to the DOM after event association.
Which is better to use, I'd say it depends on the case.
Example:
<ul id="todo">
<li>Do 1</li>
<li>Do 2</li>
<li>Do 3</li>
<li>Do 4</li>
</ul>
.Click Event:
$("li").click(function () {
$(this).remove ();
});
Event .on:
$("#todo").on("click", "li", function () {
$(this).remove();
});
Note that I've separated the selector in the .on. I'll explain why.
Let us suppose that after this association, let us do the following:
$("#todo").append("<li>Do 5</li>");
That is where you will notice the difference.
If the event was associated via .click, task 5 will not obey the click event, and so it will not be removed.
If it was associated via .on, with the selector separate, it will obey.

Event Delegation
Attach an event listener to a parent element that fires when an event occurs on a child element.
Event Propagation
When an event moves through the DOM from child to a parent element, that's called Event Propagation, because the event propagates, or moves through the DOM.
In this example, an event (onclick) from a button gets passed to the parent paragraph.
$(document).ready(function() {
$(".spoiler span").hide();
/* add event onclick on parent (.spoiler) and delegate its event to child (button) */
$(".spoiler").on( "click", "button", function() {
$(".spoiler button").hide();
$(".spoiler span").show();
} );
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.4.1/jquery.min.js"></script>
<p class="spoiler">
<span>Hello World</span>
<button>Click Me</button>
</p>
Codepen

When a `label` element contains a child `span`, clicking the label triggers on the child but not the parent

In this example, I've created a label group with a header, and have attempted to attach a click listener to each label; I eventually want an input inside each label, but it is not necessary to illustrate the behavior I don't understand.
I am seeing different behavior depending on whether I wrap the label text in a span tag:
When the label without a child span is clicked, the event handler is called once as I would expect, on the label element.
When the label with a child a span is clicked, the event handler is still called only once, but this time for the child span and not for the parent label.
I would have expected, in the second scenario, the event handler to trigger twice: once for the parent label, and once for the child span. Can someone explain why the addition of this span element seems to be preventing the event handler from propagating to the parent label?
var settingsGroup = document.getElementById("settings");
settingsGroup.querySelectorAll('.setting').forEach(function(setting) {
var options = setting.querySelectorAll('label');
options.forEach(function(option) {
option.addEventListener("click", function(ev) {
console.log(`${this.id} clicked: ${ev.target.tagName}`);
});
});
});
<div id="settings">
<div class="setting" role="group">
<div id="header">
<em>
A setting
</em>
</div>
<label id="option-a">
Option A
</label>
<label id="option-b">
<span>
Option B
</span>
</label>
</div>
</div>

This is normal. e.target is the element that was the target of the event (the span in the case of <label><span>...</span></label>. The target of the event is the span, and then the event propagates (bubbles) to its parent label, where it gets handled by your event handler.
If you want to look at the label instead, either use this as you have for id, or use e.currentTarget (the element the event is currently being delivered to).
This diagram from the old DOM3 Events spec is handy for understanding event flow:

You can use "pointer-events" CSS directive to stop span HTML elements receiving mouse events.
span
{
pointer-events: none;
}

Retrieve parent element ID on focus out

I'm trying to retrieve the TR element's ID, whenever the user removes focus from that TR. Triggering the event is easy enough, but I can't work out how best to retrieve the ID
$(".row-identifying-class").focusout(function (e) {
var rowID = e.target.id; // Returns the ID of the TD/input/label etc the user last clicked on
alert(e.target);
})
The problem appears to be that although the function above triggers whenever I remove focus from the TR, the event is actually triggered by the child element (eg the TD, input box, button etc), not the parent element.
Is there any way to retrieve the original TR, without having to trace back through the parent of each object until I hit a TR element? Perhaps by passing the ID in directly when creating the function?

You're correct in that e.target will refer to the element that raised the new event which caused the focusout to fire on the tr.
Instead, use the currentTarget property as that will point to the event bound element instead, or more simply just this.id:
$(".row-identifying-class").focusout(function(e) {
console.log(e.currentTarget.id);
})
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<table>
<tr class="row-identifying-class" id="tr">
<td>
<input type="text" value="cause a focusout on me..." />
</td>
</tr>
</table>

Use this or e.currentTarget instead of e.target
$(".row-identifying-class").focusout(function (e) {
var rowID = this.id;
alert(rowID);
});
this within a jQuery event handler will be the element instance of the matching selector the event occured on

Do delegated elements for an event need to be present when binding In JQuery? [duplicate]

Can anyone please explain event delegation in JavaScript and how is it useful?

DOM event delegation is a mechanism of responding to ui-events via a single common parent rather than each child, through the magic of event "bubbling" (aka event propagation).
When an event is triggered on an element, the following occurs:
The event is dispatched to its target
EventTarget and any event listeners
found there are triggered. Bubbling
events will then trigger any
additional event listeners found by
following the EventTarget's parent
chain upward, checking for any event
listeners registered on each
successive EventTarget. This upward
propagation will continue up to and
including the Document.
Event bubbling provides the foundation for event delegation in browsers. Now you can bind an event handler to a single parent element, and that handler will get executed whenever the event occurs on any of its child nodes (and any of their children in turn). This is event delegation. Here's an example of it in practice:
<ul onclick="alert(event.type + '!')">
<li>One</li>
<li>Two</li>
<li>Three</li>
</ul>
With that example if you were to click on any of the child <li> nodes, you would see an alert of "click!", even though there is no click handler bound to the <li> you clicked on. If we bound onclick="..." to each <li> you would get the same effect.
So what's the benefit?
Imagine you now have a need to dynamically add new <li> items to the above list via DOM manipulation:
var newLi = document.createElement('li');
newLi.innerHTML = 'Four';
myUL.appendChild(newLi);
Without using event delegation you would have to "rebind" the "onclick" event handler to the new <li> element, in order for it to act the same way as its siblings. With event delegation you don't need to do anything. Just add the new <li> to the list and you're done.
This is absolutely fantastic for web apps with event handlers bound to many elements, where new elements are dynamically created and/or removed in the DOM. With event delegation the number of event bindings can be drastically decreased by moving them to a common parent element, and code that dynamically creates new elements on the fly can be decoupled from the logic of binding their event handlers.
Another benefit to event delegation is that the total memory footprint used by event listeners goes down (since the number of event bindings go down). It may not make much of a difference to small pages that unload often (i.e. user's navigate to different pages often). But for long-lived applications it can be significant. There are some really difficult-to-track-down situations when elements removed from the DOM still claim memory (i.e. they leak), and often this leaked memory is tied to an event binding. With event delegation you're free to destroy child elements without risk of forgetting to "unbind" their event listeners (since the listener is on the ancestor). These types of memory leaks can then be contained (if not eliminated, which is freaking hard to do sometimes. IE I'm looking at you).
Here are some better concrete code examples of event delegation:
How JavaScript Event Delegation Works
Event Delegation versus Event Handling
jQuery.delegate is event delegation + selector specification
jQuery.on uses event delegation when passed a selector as the 2nd parameter
Event delegation without a JavaScript library
Closures vs Event delegation: takes a look at the pros of not converting code to use event delegation
Interesting approach PPK uncovered for delegating the focus and blur events (which do not bubble)

Event delegation allows you to avoid adding event listeners to specific nodes; instead, the event listener is added to one parent. That event listener analyzes bubbled events to find a match on child elements.
JavaScript Example :
Let's say that we have a parent UL element with several child elements:
<ul id="parent-list">
<li id="post-1">Item 1</li>
<li id="post-2">Item 2</li>
<li id="post-3">Item 3</li>
<li id="post-4">Item 4</li>
<li id="post-5">Item 5</li>
<li id="post-6">Item 6</li>
</ul>
Let's also say that something needs to happen when each child element is clicked. You could add a separate event listener to each individual LI element, but what if LI elements are frequently added and removed from the list? Adding and removing event listeners would be a nightmare, especially if addition and removal code is in different places within your app. The better solution is to add an event listener to the parent UL element. But if you add the event listener to the parent, how will you know which element was clicked?
Simple: when the event bubbles up to the UL element, you check the event object's target property to gain a reference to the actual clicked node. Here's a very basic JavaScript snippet which illustrates event delegation:
// Get the element, add a click listener...
document.getElementById("parent-list").addEventListener("click", function(e) {
// e.target is the clicked element!
// If it was a list item
if(e.target && e.target.nodeName == "LI") {
// List item found! Output the ID!
console.log("List item ", e.target.id.replace("post-"), " was clicked!");
}
});
Start by adding a click event listener to the parent element. When the event listener is triggered, check the event element to ensure it's the type of element to react to. If it is an LI element, boom: we have what we need! If it's not an element that we want, the event can be ignored. This example is pretty simple -- UL and LI is a straight-forward comparison. Let's try something more difficult. Let's have a parent DIV with many children but all we care about is an A tag with the classA CSS class:
// Get the parent DIV, add click listener...
document.getElementById("myDiv").addEventListener("click",function(e) {
// e.target was the clicked element
if(e.target && e.target.nodeName == "A") {
// Get the CSS classes
var classes = e.target.className.split(" ");
// Search for the CSS class!
if(classes) {
// For every CSS class the element has...
for(var x = 0; x < classes.length; x++) {
// If it has the CSS class we want...
if(classes[x] == "classA") {
// Bingo!
console.log("Anchor element clicked!");
// Now do something here....
}
}
}
}
});
http://davidwalsh.name/event-delegate

dom event delegation is something different from the computer science definition.
It refers to handling bubbling events from many elements, like table cells, from a parent object, like the table. It can keep the code simpler, especially when adding or removing elements, and saves some memory.

Event delegation is handling an event that bubbles using an event handler on a container element, but only activating the event handler's behavior if the event happened on an element within the container that matches a given condition. This can simplify handling events on elements within the container.
For instance, suppose you want to handle a click on any table cell in a big table. You could write a loop to hook up a click handler to each cell...or you could hook up a click handler on the table and use event delegation to trigger it only for table cells (and not table headers, or the whitespace within a row around cells, etc.).
It's also useful when you're going to be adding and removing elements from the container, because you don't have to worry about adding and removing event handlers on those elements; just hook the event on the container and handle the event when it bubbles.
Here's a simple example (it's intentionally verbose to allow for inline explanation): Handling a click on any td element in a container table:
// Handle the event on the container
document.getElementById("container").addEventListener("click", function(event) {
// Find out if the event targeted or bubbled through a `td` en route to this container element
var element = event.target;
var target;
while (element && !target) {
if (element.matches("td")) {
// Found a `td` within the container!
target = element;
} else {
// Not found
if (element === this) {
// We've reached the container, stop
element = null;
} else {
// Go to the next parent in the ancestry
element = element.parentNode;
}
}
}
if (target) {
console.log("You clicked a td: " + target.textContent);
} else {
console.log("That wasn't a td in the container table");
}
});
table {
border-collapse: collapse;
border: 1px solid #ddd;
}
th, td {
padding: 4px;
border: 1px solid #ddd;
font-weight: normal;
}
th.rowheader {
text-align: left;
}
td {
cursor: pointer;
}
<table id="container">
<thead>
<tr>
<th>Language</th>
<th>1</th>
<th>2</th>
<th>3</th>
</tr>
</thead>
<tbody>
<tr>
<th class="rowheader">English</th>
<td>one</td>
<td>two</td>
<td>three</td>
</tr>
<tr>
<th class="rowheader">Español</th>
<td>uno</td>
<td>dos</td>
<td>tres</td>
</tr>
<tr>
<th class="rowheader">Italiano</th>
<td>uno</td>
<td>due</td>
<td>tre</td>
</tr>
</tbody>
</table>
Before going into the details of that, let's remind ourselves how DOM events work.
DOM events are dispatched from the document to the target element (the capturing phase), and then bubble from the target element back to the document (the bubbling phase). This graphic in the old DOM3 events spec (now superceded, but the graphic's still valid) shows it really well:
Not all events bubble, but most do, including click.
The comments in the code example above describe how it works. matches checks to see if an element matches a CSS selector, but of course you can check for whether something matches your criteria in other ways if you don't want to use a CSS selector.
That code is written to call out the individual steps verbosely, but on vaguely-modern browsers (and also on IE if you use a polyfill), you can use closest and contains instead of the loop:
var target = event.target.closest("td");
console.log("You clicked a td: " + target.textContent);
} else {
console.log("That wasn't a td in the container table");
}
Live Example:
// Handle the event on the container
document.getElementById("container").addEventListener("click", function(event) {
var target = event.target.closest("td");
if (target && this.contains(target)) {
console.log("You clicked a td: " + target.textContent);
} else {
console.log("That wasn't a td in the container table");
}
});
table {
border-collapse: collapse;
border: 1px solid #ddd;
}
th, td {
padding: 4px;
border: 1px solid #ddd;
font-weight: normal;
}
th.rowheader {
text-align: left;
}
td {
cursor: pointer;
}
<table id="container">
<thead>
<tr>
<th>Language</th>
<th>1</th>
<th>2</th>
<th>3</th>
</tr>
</thead>
<tbody>
<tr>
<th class="rowheader">English</th>
<td>one</td>
<td>two</td>
<td>three</td>
</tr>
<tr>
<th class="rowheader">Español</th>
<td>uno</td>
<td>dos</td>
<td>tres</td>
</tr>
<tr>
<th class="rowheader">Italiano</th>
<td>uno</td>
<td>due</td>
<td>tre</td>
</tr>
</tbody>
</table>
closest checks the element you call it on to see if it matches the given CSS selector and, if it does, returns that same element; if not, it checks the parent element to see if it matches, and returns the parent if so; if not, it checks the parent's parent, etc. So it finds the "closest" element in the ancestor list that matches the selector. Since that might go past the container element, the code above uses contains to check that if a matching element was found, it's within the container — since by hooking the event on the container, you've indicated you only want to handle elements within that container.
Going back to our table example, that means that if you have a table within a table cell, it won't match the table cell containing the table:
// Handle the event on the container
document.getElementById("container").addEventListener("click", function(event) {
var target = event.target.closest("td");
if (target && this.contains(target)) {
console.log("You clicked a td: " + target.textContent);
} else {
console.log("That wasn't a td in the container table");
}
});
table {
border-collapse: collapse;
border: 1px solid #ddd;
}
th, td {
padding: 4px;
border: 1px solid #ddd;
font-weight: normal;
}
th.rowheader {
text-align: left;
}
td {
cursor: pointer;
}
<!-- The table wrapped around the #container table -->
<table>
<tbody>
<tr>
<td>
<!-- This cell doesn't get matched, thanks to the `this.contains(target)` check -->
<table id="container">
<thead>
<tr>
<th>Language</th>
<th>1</th>
<th>2</th>
<th>3</th>
</tr>
</thead>
<tbody>
<tr>
<th class="rowheader">English</th>
<td>one</td>
<td>two</td>
<td>three</td>
</tr>
<tr>
<th class="rowheader">Español</th>
<td>uno</td>
<td>dos</td>
<td>tres</td>
</tr>
<tr>
<th class="rowheader">Italiano</th>
<td>uno</td>
<td>due</td>
<td>tre</td>
</tr>
</tbody>
</table>
</td>
<td>
This is next to the container table
</td>
</tr>
</tbody>
</table>

The delegation concept
If there are many elements inside one parent, and you want to handle events on them of them - don’t bind handlers to each element.
Instead, bind the single handler to their parent, and get the child from event.target.
This site provides useful info about how to implement event delegation.
http://javascript.info/tutorial/event-delegation

To understand event delegation first we need to know why and when we actually need or want event delegation.
There may be many cases but let's discuss two big use cases for event delegation.
1. The first case is when we have an element with lots of child elements that we are interested in. In this case, instead of adding an event handler to all of these child elements, we simply add it to the parent element and then determine on which child element the event was fired.
2.The second use case for event delegation is when we want an event handler attached to an element that is not yet in the DOM when our page is loaded. That's, of course, because we cannot add an event handler to something that's not on our page, so in a case of deprecation that we're coding.
Suppose you have a list of 0, 10, or 100 items in the DOM when you load your page, and more items are waiting in your hand to add in the list. So there is no way to attach an event handler for the future elements or those elements are not added in the DOM yet, and also there may be a lot of items, so it wouldn't be useful to have one event handler attached to each of them.
Event Delegation
All right, so in order to talk about event delegation, the first concept that we actually need to talk about is event bubbling.
Event bubbling:
Event bubbling means that when an event is fired or triggered on some DOM element, for example by clicking on our button here on the bellow image, then the exact same event is also triggered on all of the parent elements.
The event is first fired on the button, but then it will also be fired on all the parent elements one at a time, so it will also fire on the paragraph to the section the main element and actually all the way up in a DOM tree until the HTML element which is the root. So we say that the event bubbles up inside the DOM tree, and that's why it's called bubbling.
Target element: The element on which the event was actually first fired called the target element, so the element that caused the event to happen, is called the target element. In our above example here it's, of course, the button that was clicked. The important part is that this target element is stored as a property in the event object, This means that all the parent elements on which the event will also fire will know the target element of the event, so where the event was first fired.
That brings us to event delegation because if the event bubbles up in the DOM tree, and if we know where the event was fired then we can simply attach an event handler to a parent element and wait for the event to bubble up, and we can then do whatever we intended to do with our target element. This technique is called event delegation. In this example here, we could simply add the event handler
to the main element.
All right, so again, event delegation is to not set up the event handler on the original element that we're interested in but to attach it to a parent element and, basically, catch the event there because it bubbles up. We can then act on the element that we're interested in using the target element property.
Example:
Now lets assume we have two list item in our page, after adding items in those list programmtically we want to delete one or more items from them. Using event delegation tecnique we can achive our ppurpose easily.
<div class="body">
<div class="top">
</div>
<div class="bottom">
<div class="other">
<!-- other bottom elements -->
</div>
<div class="container clearfix">
<div class="income">
<h2 class="icome__title">Income</h2>
<div class="income__list">
<!-- list items -->
</div>
</div>
<div class="expenses">
<h2 class="expenses__title">Expenses</h2>
<div class="expenses__list">
<!-- list items -->
</div>
</div>
</div>
</div>
</div>
Adding items in those list:
const DOMstrings={
type:{
income:'inc',
expense:'exp'
},
incomeContainer:'.income__list',
expenseContainer:'.expenses__list',
container:'.container'
}
var addListItem = function(obj, type){
//create html string with the place holder
var html, element;
if(type===DOMstrings.type.income){
element = DOMstrings.incomeContainer
html = `<div class="item clearfix" id="inc-${obj.id}">
<div class="item__description">${obj.descripiton}</div>
<div class="right clearfix">
<div class="item__value">${obj.value}</div>
<div class="item__delete">
<button class="item__delete--btn"><i class="ion-ios-close-outline"></i></button>
</div>
</div>
</div>`
}else if (type ===DOMstrings.type.expense){
element=DOMstrings.expenseContainer;
html = ` <div class="item clearfix" id="exp-${obj.id}">
<div class="item__description">${obj.descripiton}</div>
<div class="right clearfix">
<div class="item__value">${obj.value}</div>
<div class="item__percentage">21%</div>
<div class="item__delete">
<button class="item__delete--btn"><i class="ion-ios-close-outline"></i></button>
</div>
</div>
</div>`
}
var htmlObject = document.createElement('div');
htmlObject.innerHTML=html;
document.querySelector(element).insertAdjacentElement('beforeend', htmlObject);
}
Delete items:
var ctrlDeleteItem = function(event){
// var itemId = event.target.parentNode.parentNode.parentNode.parentNode.id;
var parent = event.target.parentNode;
var splitId, type, ID;
while(parent.id===""){
parent = parent.parentNode
}
if(parent.id){
splitId = parent.id.split('-');
type = splitId[0];
ID=parseInt(splitId[1]);
}
deleteItem(type, ID);
deleteListItem(parent.id);
}
var deleteItem = function(type, id){
var ids, index;
ids = data.allItems[type].map(function(current){
return current.id;
});
index = ids.indexOf(id);
if(index>-1){
data.allItems[type].splice(index,1);
}
}
var deleteListItem = function(selectorID){
var element = document.getElementById(selectorID);
element.parentNode.removeChild(element);
}

Delegation is a technique where an object expresses certain behavior to the outside but in reality delegates responsibility for implementing that behaviour to an associated object. This sounds at first very similar to the proxy pattern, but it serves a much different purpose. Delegation is an abstraction mechanism which centralizes object (method) behavior.
Generally spoken: use delegation as alternative to inheritance. Inheritance is a good strategy, when a close relationship exist in between parent and child object, however, inheritance couples objects very closely. Often, delegation is the more flexible way to express a relationship between classes.
This pattern is also known as "proxy chains". Several other design patterns use delegation - the State, Strategy and Visitor Patterns depend on it.

Event delegation makes use of two often overlooked features of JavaScript events: event bubbling and the target element.When an event is triggered on an element, for example a mouse click on a button, the same event is also triggered on all of that element’s ancestors. This process is known as event bubbling; the event bubbles up from the originating element to the top of the DOM tree.
Imagine an HTML table with 10 columns and 100 rows in which you want something to happen when the user clicks on a table cell. For example, I once had to make each cell of a table of that size editable when clicked. Adding event handlers to each of the 1000 cells would be a major performance problem and, potentially, a source of browser-crashing memory leaks. Instead, using event delegation, you would add only one event handler to the table element, intercept the click event and determine which cell was clicked.

It's basically how association is made to the element. .click applies to the current DOM, while .on (using delegation) will continue to be valid for new elements added to the DOM after event association.
Which is better to use, I'd say it depends on the case.
Example:
<ul id="todo">
<li>Do 1</li>
<li>Do 2</li>
<li>Do 3</li>
<li>Do 4</li>
</ul>
.Click Event:
$("li").click(function () {
$(this).remove ();
});
Event .on:
$("#todo").on("click", "li", function () {
$(this).remove();
});
Note that I've separated the selector in the .on. I'll explain why.
Let us suppose that after this association, let us do the following:
$("#todo").append("<li>Do 5</li>");
That is where you will notice the difference.
If the event was associated via .click, task 5 will not obey the click event, and so it will not be removed.
If it was associated via .on, with the selector separate, it will obey.

Event Delegation
Attach an event listener to a parent element that fires when an event occurs on a child element.
Event Propagation
When an event moves through the DOM from child to a parent element, that's called Event Propagation, because the event propagates, or moves through the DOM.
In this example, an event (onclick) from a button gets passed to the parent paragraph.
$(document).ready(function() {
$(".spoiler span").hide();
/* add event onclick on parent (.spoiler) and delegate its event to child (button) */
$(".spoiler").on( "click", "button", function() {
$(".spoiler button").hide();
$(".spoiler span").show();
} );
});
<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.4.1/jquery.min.js"></script>
<p class="spoiler">
<span>Hello World</span>
<button>Click Me</button>
</p>
Codepen

jquery 'on' not working

I've a statically created table:
<table id="table" style="width:100%">
<tbody id="tbody">
</tbody>
</table>
I've dinamically created some elements:
var tbody = document.getElementById('tbody');
for (var i = 0; i < 8; i++) {
var tr = document.createElement('tr');
for (var j = 0; j < 8; j++) {
var td = document.createElement('td');
td.appendChild( createDiv(i,j)); // div id is = i + ' ' + j
tr.appendChild(td);
}
tbody.appendChild(tr);
}
But now I'm trying to add a callback function for each div, but this is not working. I think that the problem is with the jquery on function but I don't know how to solve it.
for(var x=0;x<8;x++){
for(var y=0;y<8;y++){
$(document.body).on('mousedown', '#' + x + ' ' + y, function(){
var audio = document.getElementById('audio');
audio.currentTime = 0;
audio.play();
});
}
}
When I try to do the same with static elements it works fine, does anybody know what is happening? Thanks

There are other answers here that are correct in their answer, but I wanted to add a bit more clarification.
The purpose of jQuery's on() is to attach event handlers to selected elements. The purpose of the selector parameter is to create a delegated handler. From the jQuery documentation:
The handler is not called when the event occurs directly on the bound element, but only for descendants (inner elements) that match the selector.
In addition:
Delegated events have the advantage that they can process events from descendant elements that are added to the document at a later time.
(I would recommend you read the whole section on Direct and delegated events by the way.)
In any case, for your particular example, you want to build your DOM in such a way that there is a top-level element that is guaranteed to exist at the time the delegated event is attached. It may be your table, or a div element above your table. You could also attach to the body or the document, but, it is better to attach the event to the closest element that will be guaranteed to exist per this documentation:
Attaching many delegated event handlers near the top of the document tree can degrade performance. Each time the event occurs, jQuery must compare all selectors of all attached events of that type to every element in the path from the event target up to the top of the document. For best performance, attach delegated events at a document location as close as possible to the target elements. Avoid excessive use of document or document.body for delegated events on large documents.
In your particular case, it appears that the table is a guaranteed element. Because of that, you can attach to that and delegate the divs that are inside. (Of course, appropriate adjust your selectors to get the correct divs.) Assuming you want all divs to bubble up, then your attachment would be something like this:
$('#table').on('mousedown', 'div', function(e) {
console.log('Do some stuff here.');
});
Of course, you'll want to do this inside the document ready handler to ensure that your elements are present.
Also, be aware that IDs cannot start with a number in the HTML 4 spec. If you are developing HTML 5, however, IDs can basically be anything as long as they are unique, don't contain any spaces, and are at least a single character.

$(document.body).on('mousedown', '#tbody td', function(e){
//TODO::add code here
});
Need not bind event to every td dom.

Regarding your armada of event handlers.
Use 3 steps to make it 1 handler for all the dom elements:
Make the sequenctial number part of the id, to have them distinguishable.
Then only instantiate one eventhandler for the body mousedown call. No more for in for loop.
Distinguish via the event object (argument of your event callback), which id was clicked. (i think it was event.target or the alike)
Regarding the usage of this like pointed out in the comment, it might be generally useful to reference the id of an dom element that refers to a domain object. Thus the explicit id can directly relate to the underlying resource identifier( pk ...).

Creating a delegate for each #id is overkill
You can directly attach the click event to each ID in the loop or simple create a single delegate event listener.
$("#table").on("click", "div", function(e){
// use div.class to limit delegate
// split id, pull values from the dom or innerText
var el = this;
var id = this.id;
});