I'm trying to build a javascript object from the inputs of a dynamic form. This is what I'm trying to do:
fieldTickets = [];
thisWeek = randomDateOnSunday;
weekDay = randomWeekDayWithinTheWeek;
fieldTickets[thisWeek]['days'][weekDay]['fieldTechs'].push({name: fieldTechName});
As you can see, I have some keys that are dynamic variables and some that are defined ('days' and 'fieldTechs' are always the same, but the week and weekday will change). Unfortunately every time I try to run this, even on fiddles, it gives me Cannot read properties of undefined (reading 'days') as an error. I've been dealing with this for hours and can't figure it out.
How does one build a nested array/object with dynamic keys?
i thought that it would create it automatically if it didn't exist by
using that syntax...obviously I'm wrong but is there another shorter
way than a ton of if exists statements?
JavaScript will not create it automatically, but can do it without if, try something like below
const thisWeek = '12'; //randomDateOnSunday;
const weekDay = 'Sunday'; // randomWeekDayWithinTheWeek;
fieldTickets = {
[thisWeek]: {
days: {
[weekDay]: {
fieldTechs: []
}
}
}
};
console.log('fieldTickets:', fieldTickets);
// pushing
fieldTickets[thisWeek]['days'][weekDay]['fieldTechs'].push({
name: "Hello"
});
// pushing again
fieldTickets[thisWeek]['days'][weekDay]['fieldTechs'].push({
name: "World"
});
console.log('fieldTickets 2:', fieldTickets);
Related
I was told to try and use a certain code for one of the problems I solved a while ago. I'm trying to figure it out but am coming up with nada.
Using replace(), map() etc..
This is all supposed to be done using replit and not changing the whole array as part of the 'For Fun' challenge.
const products = [
{
priceInCents: 3995,
},
{
priceInCents: 2500,
},
{
priceInCents: 8900,
},
{
priceInCents: 12500,
},
];
/* Now trying to use:
products[i].priceInDollars = $${(products[i].priceInCents * .01).toFixed(2)}
*/
/*
New
Code
*/
function addPriceInDollarsKeyToProducts(pricey)
{ for (let i = 0; i < products.length; i++)
{ for (let product = products[i];
product.priceInDollars = `$${(product.priceInCents * .01).toFixed(2)}`; )
break;
}
}
addPriceInDollarsKeyToProducts();
console.log(products)
Running this snippet btw makes it seem like it's okay.
For example: I want products[0].priceInDollars to be "$39.95",
but instead I get '$39.95',
Snippet runs it as "$39.95"
I'm not supposed to recreate the whole entire array.
If the code doesn't match the double quote requirements I get TypeError: Cannot read property '0' of undefined
edited for clarification purposes
Alright, a friend caught the problem.
I never reinserted my return like a dumb dumb.
Here I was going crazy trying to make a '"$39.95"' into a "$39.95" via replace(), map(), creating a replace function and what not when it was simply that I needed to add
return products;
at the end between the ending }
Is it possible to enter only one argument to SetState that contains both the name and the value. See the example below. Is there something wrong with the brackets?
This would be handy when changing a lot of states at the same time. That is, first prepare them in one long string and execute setState only once. Thank you!
this.setState({myState: "help"}) // this works of course
whatstate='myState'
this.setState({[whatstate]: "me"}) // this too
whatstate2='myState: "please"'
this.setState(whatstate2) // but how to make this work?
// if you like to work only with strings
var whatstate = {};
whatstate['myState1'] = 'help';
whatstate['myState2'] = 'me';
whatstate['myState3'] = 'please';
// ^ this will produce an object equivalent to this
//whatstate = {
// myState1: 'help',
// myState2: 'me',
// myState3: 'please'
//}
// which you can use it to 'setState'
this.setState(whatstate);
You can call this.setState({ whatstate2 }) to achieve the same effect. This is the property value shorthand from ES6.
Reference: https://ariya.io/2013/02/es6-and-object-literal-property-value-shorthand
In case you'd like to update multiple states in one go, you can also do that like this.
this.setState({
myState1 : newState1,
myState2 : newState2
});
If the variable names are the same as the state names as mentioned previously, you can do.
this.setState({ myState1, myState2 });
PS: I have already searched the forums and have seen the relevant posts for this wherein the same post exists but I am not able to resolve my issue with those solutions.
I have 2 json objects
var json1 = [{uid:"111", addrs:"abc", tab:"tab1"},{uid:"222", addrs:"def", tab:"tab2"}];
var json2 = [{id:"tab1"},{id:"new"}];
I want to compare both these and check if the id element in json2 is present in json1 by comparing to its tab key. If not then set some boolean to false. ie by comparing id:"tab1" in json2 to tab:"tab1 in json1 .
I tried using below solutions as suggested by various posts:
var o1 = json1;
var o2 = json2;
var set= false;
for (var p in o1) {
if (o1.hasOwnProperty(p)) {
if (o1[p].tab!== o2[p].id) {
set= true;
}
}
}
for (var p in o2) {
if (o2.hasOwnProperty(p)) {
if (o1[p].tab!== o2[p].id) {
set= true;
}
}
}
Also tried with underscore as:
_.each(json1, function(one) {
_.each(json2, function(two) {
if (one.tab!== two.id) {
set= true;
}
});
});
Both of them fail for some test case or other.
Can anyone tell any other better method or outline the issues above.
Don't call them JSON because they are JavaScript arrays. Read What is JSON.
To solve the problem, you may loop over second array and then in the iteration check if none of the objects in the first array matched the criteria. If so, set the result to true.
const obj1 = [{uid:"111", addrs:"abc", tab:"tab1"},{uid:"222",addrs:"def", tab:"tab2"}];
const obj2 = [{id:"tab1"},{id:"new"}];
let result = false;
for (let {id} of obj2) {
if (!obj1.some(i => i.tab === id)) {
result = true;
break;
}
}
console.log(result);
Unfortunately, searching the forums and reading the relevant posts is not going to replace THINKING. Step away from your computer, and write down, on a piece of paper, exactly what the problem is and how you plan to solve it. For example:
Calculate for each object in an array whether some object in another array has a tab property whose value is the same as the first object's id property.
There are many ways to do this. The first way involves using array functions like map (corresponding to the "calculate for each" in the question, and some (corresponding to the "some" in the question). To make it easier, and try to avoid confusing ourselves, we'll do it step by step.
function calculateMatch(obj2) {
return obj2.map(doesSomeElementInObj1Match);
}
That's it. Your program is finished. You don't even need to test it, because it's obviously right.
But wait. How are you supposed to know about these array functions like map and some? By reading the documentation. No one help you with that. You have to do it yourself. You have to do it in advance as part of your learning process. You can't do it at the moment you need it, because you won't know what you don't know!
If it's easier for you to understand, and you're just getting started with functions, you may want to write this as
obj2.map(obj1Element => doesSomeElementInObj1Match(obj1Element))
or, if you're still not up to speed on arrow functions, then
obj2.map(function(obj1Element) { return doesSomeElementInObj1Match(obj1Element); })
The only thing left to do is to write doesSomeElementInObj2Match. For testing purposes, we can make one that always returns true:
function doesSomeElementInObj2Match() { return true; }
But eventually we will have to write it. Remember the part of our English description of the problem that's relevant here:
some object in another array has a tab property whose value is the same as the first object's id property.
When working with JS arrays, for "some" we have the some function. So, following the same top-down approach, we are going to write (assuming we know what the ID is):
In the same way as above, we can write this as
function doesSomeElementInObj2Match(id) {
obj2.some(obj2Element => tabFieldMatches(obj2Element, id))
}
or
obj2.some(function(obj2Element) { return tabFieldMatches(obj2Element, id); })
Here, tabFieldMatches is nothing more than checking to make sure obj2Element.tab and id are identical.
We're almost done! but we still have to write hasMatchingTabField. That's quite easy, it turns out:
function hasMatchingTabField(e2, id) { return e2.tab === id; }
In the following, to save space, we will write e1 for obj1Element and e2 for obj2Element, and stick with the arrow functions. This completes our first solution. We have
const tabFieldMatches = (tab, id) { return tab === id; }
const hasMatchingTabField = (obj, id) => obj.some(e => tabFieldMatches(e.tab, id);
const findMatches = obj => obj.some(e => hasMatchingTabField(e1, obj.id));
And we call this using findMatches(obj1).
Old-fashioned array
But perhaps all these maps and somes are a little too much for you at this point. What ever happened to good old-fashioned for-loops? Yes, we can write things this way, and some people might prefer that alternative.
top: for (e1 of obj1) {
for (e2 of (obj2) {
if (e1.id === e2.tab) {
console.log("found match");
break top;
}
}
console.log("didn't find match);
}
But some people are sure to complain about the non-standard use of break here. Or, we might want to end up with an array of boolean parallel to the input array. In that case, we have to be careful about remembering what matched, at what level.
const matched = [];
for (e1 of obj1) {
let match = false;
for (e2 of obj2) {
if (e1.id === e2.tab) match = true;
}
matched.push(match);
}
We can clean this up and optimize it bit, but that's the basic idea. Notice that we have to reset match each time through the loop over the first object.
I have an array that contains dates. and for some reason I can't get it to show on my screen I've been debugging for a few days now and I've tracked it down to a single line, but the line has worked before and I can't figure out what the issue might be.
The array looks like this:
var selectItems =
[ "05-26-2017", "06-02-2017", "06-09-2017",
"06-16-2017", "06-23-2017", "06-30-2017", "07-07-2017", "07-14-2017",
"07-21-2017", "07-28-2017"...];
It's passed as an argument from another function, but that's how it's showing in console.log().
I might be going about this the wrong way, maybe even a lot further around then I need to but this is what I've come up with:
1. function setTHead(selectItems) {
2 var formatString;
3. for (var x = 0; x < 12; x++) {
4. formatString = selectItems[x].replace(/[^0-9/-]/g, "").toString();
5. console.log(selectItems);
6. $('#datTab').append("<div id='col" + x + "' class='column'>'" + formatString + "'</div>");
7. }
8. }
the array up top is what's showing from the console.log 5 lines down.
the sixth line is what is seeming to give me issues. Nothing is put on the page at all.
I'm getting a console error saying:
jQuery.Deferred exception: selectItems is undefined setTHead#http://localhost/mySite/script.js:136:9
startUp2#http://localhost/mySite/script.js:146:5
#http://localhost/mySite/table.php:19:9
mightThrow#http://localhost/mySite/lib/jquery.js:3586:52
resolve/</process<#http://localhost/mySite/lib/jquery.js:3654:49
setTimeout handler*resolve/<#http://localhost/mySite/lib/jquery.js:3692:37
fire#http://localhost/mySite/lib/jquery.js:3320:30
fireWith#http://localhost/mySite/lib/jquery.js:3450:29
fire#http://localhost/mySite/lib/jquery.js:3458:21
fire#http://localhost/mySite/lib/jquery.js:3320:30
fireWith#http://localhost/mySite/lib/jquery.js:3450:29
ready#http://localhost/mySite/lib/jquery.js:3923:13
completed#http://localhost/mySite/lib/jquery.js:3933:9
EventListener.handleEvent*#http://localhost/mySite/lib/jquery.js:3949:9
#http://localhost/mySite/lib/jquery.js:39:9
#http://localhost/mySite/lib/jquery.js:17:3
undefined
followed by:
TypeError: selectItems is undefined
and thats pointing to line 6.
if anyone has any advice I would be very much appreciative. Thank you in advance.
EDIT: A little more code:
function startTblView(defSel) {
if (defSel === true) {
setCookie('defSel', true, 7);
} else{
setCookie('defSel', false, 7);
}
saveSelected();
window.open('table.php', '_self');
defSel = getCookie('defSel');
if (defSel) {
selectItems = getDefDates();
}else {
selectItems = reGetSelected();
}
setTHead(selectItems);
}
defSel, is a boolean passed from my last page stating whether I'm doing a default view or a custom view, the custom view is passed from saveSelected();
saveSelected is a function for just saving the selected global value as a cookie so I can pull it out on the next page.
getDefDates pulls the default values for the array
reGetSelected, gets the selected array from the cookie.
I apologize for wonky naming conventions. I'm the only one working on this site and I'm just making sure the names don't overlap.
You can do this :
HTML code
<div id="datTab"></div>
JS code
var selectItems =
[ "05-26-2017", "06-02-2017", "06-09-2017",
"06-16-2017", "06-23-2017", "06-30-2017", "07-07-2017", "07-14-2017",
"07-21-2017", "07-28-2017"];
function setTHead(selectItems) {
var formatString;
$.each( selectItems, function( index, value ){
formatString = value.replace(/[^0-9/-]/g, "").toString();
$('#datTab').append("<div id='col" + index + "' class='column'>'" + value + "'</div>");
});
};
You can use $.each, its better than 'for' with javascript.
The .each() method is designed to make DOM looping constructs concise
and less error-prone. When called it iterates over the DOM elements
that are part of the jQuery object. Each time the callback runs, it is
passed the current loop iteration, beginning from 0. More importantly,
the callback is fired in the context of the current DOM element, so
the keyword this refers to the element.
I did a JsFiddle
Here.
I have an array that looks something like this.
Users : {
0 : { BidderBadge: "somestuff", Bidders: 6, }
1 : { BidderBadge: "somemorestuff", Bidders: 7,}
}
I want to search the array using lodash to find a value inside of each of the user objects.
Specifically, I want to use values from another similar array of objects to find the value.
var bidArray = [];
_.each(this.vue.AllUsers, function(user) {
_.each(this.vue.Bids, function(bid) {
if(user.BidderBadge == bid.Badge) {
bidArray.push(user);
}
});
});
This is what I have and it works, but I want to do it using only one loop instead of two. I want to use something like _.indexOf. Is that possible?
If you want to avoid nesting, you just have to modify Azamantes' solution a bit
var bidders = this.vue.Bids.reduce(function(acc, bid) {
return acc[bid.BidderBadge] = true;
}, {});
var bidArray = this.vue.AllBidders.filter(function(bidder) {
return !!bidders[bidder.Badge];
});
It is difficult to give an accurate answer with an example that doesn't coincide with the input that your provide.
Anyway, supposing your data structures were more or less like this ones, you could solve the problem with lodash _.intersectionWith.
Intersect both arrays using a comparator that checks the correct object properties. Also, take into account that users must go first in the intersection due to the fact that you're interested in its values.
function comparator(user, bid) {
return user.BidderBadge === bid.Badge;
}
console.log(_.intersectionWith(users, bids, comparator));
Here's the fiddle.