I have a github repo from where I pull the code and done npm install and that results in the error like,
npm ERR! code EINTEGRITY
npm ERR! Verification failed while extracting #my-package#^1.2.0:
npm ERR! Verification failed while extracting #my-package#^1.2.0:
npm ERR! Integrity check failed:
npm ERR! Wanted: sha512-lQ...HA==
npm ERR! Found: sha512-nH...ow==
Even though I referred multiple similar solutions like this, they are mentioning that we need to delete package-lock.json file but my lead has asked me not to delete lock file and it needs to be same for all the machines.
How can I get rid of this error without deleting package-lock.json file?
Deleting node_modules and doing npm i doesn't do any trick
and the above mentioned error still persists..
Related
My Node version is 10.15.0 and NPM version is 6.8.4
On running npm install after upgrading
npm to 14.16.0 and npm to 7.6.2
Getting this error -
npm ERR! code E401
npm ERR! Incorrect or missing password.
npm ERR! If you were trying to login, change your password, create an
npm ERR! authentication token or enable two-factor authentication then
npm ERR! that means you likely typed your password in incorrectly.
npm ERR! Please try again, or recover your password at:
npm ERR! https://www.npmjs.com/forgot
npm ERR!
npm ERR! If you were doing some other operation then your saved credentials are
npm ERR! probably out of date. To correct this please try logging in again with:
npm ERR! npm login
npm ERR! A complete log of this run can be found in:
npm ERR! /Users/xyz/.npm/_logs/2021-04-15T18_55_07_993Z-debug.log
Try Deleting the package-lock.json file before running the command "npm install" after upgrading the node versions, if you have not done that.
If that will not work try removing the .npmrc file in $HOME directory as mentioned in this post.
NPM ERR Code E401: Unable to authenticate, need: Bearer authorization
Note - Deleting package-lock.json can have its own issues as mentioned in this posts, so go with this solution unless you find any better solution.
Deleting `package-lock.json` to Resolve Conflicts quickly
In the directory C/Users/your-windows-username/
delete the following files:
.cache
.package
.package-lock
.npmrc
After that, go to your project and run the following command in your terminal
npm i
I had the same error with the company registry configured in .npmrc
registry=https:<company-registry-url>
Node version : 19.1.0
NPM version : 8.19.3
Solution:
Execute npm login
$ npm login
npm notice Log in on https:<registry-url>
Username: xxxx
Password:
Email: (this IS public) (xxxx)
Logged in as xxx on https:<registry-url>.
After this .npmrc got updated with
//<registry-url>/:_authToken=xxxxx
Your password in .npmrc must be base64 encoded. Easy to screw up just copy-pasting the password, need to base64 encode that.
I have been getting the same error recently on various projects after running npm run dev:
npm ERR! code E401
npm ERR! Incorrect or missing password.
What fixed it for me was to delete my package-lock.json file (and any yarn.lock files, which might create conflicts with npm) and the node_modules directory. Then I updated my npm packages with npm update. (CAUTION: Before updating any npm packages, you should probably create a new Git branch and run npm update in that new branch. If you run into bigger problems after the updates, then you can revert back to your previous branch.)
After my packages were updated, then running my npm startup script (e.g. npm run dev) worked again without errors.
NOTE: You can run npm outdated to see which of your npm packages could use an update.
Had the same issue with Node 16.x.x.
I have done everything from this topic and those topics which were mentioned here and nothing helped me!
The only thing that helped me to login was that I have deleted Node 16.x.x and installed Node 14.8.1 from here - https://nodejs.org/en/download/releases/
It can be happening because of a bug on npm. This was happening to me with npm v7. Switched to v6 and it worked.
More context: https://github.com/npm/cli/pull/2153
Reinstall the lastest node.js. That fixed my issue.
I needed to fix security vulnerabilities for knexnest > knex > minimist. The version for minimist did not get updated with npm audit fix or simple npm update. I followed this article and it updated the versions and gave a vulnerability score of 0. But now when I create a docker image (build) my repo, it fails at the preinstall script.
npx: installed 5 in 5.29s
EACCES: permission denied, open './package-lock.json'
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! my-service#1.2.3 preinstall: `npx npm-force-resolutions`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the my-service#1.2.3 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm WARN Local package.json exists, but node_modules missing, did you mean to install?
npm ERR! A complete log of this run can be found in:
npm ERR! /home/node/.npm/_logs/2020-07-15T09_56_56_625Z-debug.log
While installing modules locally on editor, no errors pop up. Please help!
I had the same error, I fixed it with
chmod 666 package-lock.json
This doesn't seem as a root cause solution, but it's a simple workaround.
The command create-react-app my-app worked fine for the last week that I have been using it and now it is returning the error "rollbackFailedOptional: verb npm-session 895a42364389108b".
I already tried
npm config rm proxy
npm config rm https-proxy
npm config set registry http://registry.npmjs.org/
I am still getting the same error.
Edit:
after letting it fail completely it says the following:
npm ERR! code ENOTFOUND
npm ERR! errno ENOTFOUND
npm ERR! network request to http://registry.npmjs.org/create-react-app failed, reason: getaddrinfo ENOTFOUND domain
npm ERR! network This is a problem related to network connectivity.
npm ERR! network In most cases you are behind a proxy or have bad network settings.
npm ERR! network
npm ERR! network If you are behind a proxy, please make sure that the
npm ERR! network 'proxy' config is set properly. See: 'npm help config'
npm ERR! A complete log of this run can be found in:
npm ERR! C:\Users\caleb\AppData\Roaming\npm-cache\_logs\2020-06-05T19_30_34_621Z-debug.log
I figured it out. I did
npm config get proxy
it returned null
So I had to go to "C:\Users\Myname.npmrc", open it in a notepad and then delete whats in there and add
proxy=http://yourorganizationproxy.com:8080
https-proxy=http://yourorganizationproxy.com:8080
As Caleb indicates you should go to "C:\Users\<user>" and check for .npmrc file, then edit with any notepad app. Then you should
Delete everything
Add:
proxy=http://yourorganizationproxy.com:8080
https-proxy=http://yourorganizationproxy.com:8080
strict-ssl=false
Save
Hope it helps
I get this error whenever I NPM install react-router-dom in vs code:
npm ERR! Unexpected end of JSON input while parsing near
'...stack-launcher":"^1.0'
npm ERR! A complete log of this run can be found in: npm ERR!
C:\Users\HP\AppData\Roaming\npm-cache_logs\2019-03-18T09_03_43_417Z-debug.log
Seems like you missed a comma after '...stack-launcher":"^1.0' in the package.json file.
If not delete the node_modules folder, delete package-lock.json file, run npm cache clean --force and try to re-install.
I am running npm update -g and I get
npm ERR! code E404
npm ERR! 404 Not found : default-html-example
npm ERR! 404
npm ERR! 404 'default-html-example' is not in the npm registry.
npm ERR! 404 You should bug the author to publish it (or use the name yourself!)
npm ERR! 404
npm ERR! 404 Note that you can also install from a
npm ERR! 404 tarball, folder, http url, or git url.
npm ERR! A complete log of this run can be found in:
npm ERR! /Users/me/.npm/_logs/2018-10-25T22_24_12_353Z-debug.log
So, I get this after any command now, for example in any project, when I run ./node_modules/.bin/eslin . I get the linter results, but at the end of the verbose there is always this error.
--- UPDATE ---
Upon further investigation, I have found this.
Something called /usr/local/lib/node_modules/default-html-example
This is something I have worked on as an example as part of one of my first tutorials. Not sure about how on earth it ended up there.
When I checked it, it turns out it is a symlink to a tutorial: default-html-example -> /Users/me/learning/lynda_com_JavaScript_Essential_Training/MY_Ex_Files_JavaScript_EssT/Exercise_Files/default
This is still a mystery, how it ended up there?
Finding and removing that rogue folder /usr/local/lib/node_modules/default-html-example solved the issue.
However, I am still not sure how that folder ended up in that location. It was one of my first tutorial project folders.