Creating "shortcut" to manipulate deeply nested object keys - javascript

I have a deeply nested object, and throughout my code I often need to manipulate data like this:
var current_index = test_dict['current']['index']
var current_section = test_dict['current']['section']
test_dict[current_section]['data']['words'][current_index]
So you can see when accessing the object, I'm using variables that reference other parts of the object. This has been working great for me, but throughout my code I also need to periodically update current_index and current_section.
Since those variables are only shallow copies/references and not direct shortcuts to those actual values, doing current_index++ increases current_index but not test_dict['current']['index']
In my code test_dict needs to store all of the current information, so I'm trying to figure out how I can update that dictionary directly without typing out a deeply nested path.
I know I can use dot notation, but that wouldn't save me any time since I would have to do something like:
test_dict[test_dict.current.section]['data']['words'][test_dict.current.index]
I know I can also create a reference to let current_index and let current_section at the beginning of the function, but since I have to manipulate that test_dict object in almost every function it would be impractical to define it hundreds of times.
Is there a better way? Should I just create a getCurrentIndex() function and then do this?
test_dict[getCurrentSection()]['data']['words'][getCurrentIndex()]

Since those variables are only shallow copies/references and not direct shortcuts to those actual values, doing current_index++ increases current_index but not test_dict['current']['index']
OK.. objects(and arrays) are pointers/references.. numbers, strings, booleans, etc are copies.. If you want shortcuts to things, here is an example
var current=test_dict['current'];
var current_index = current['index'];
var current_section = current['section'];
test_dict[current_section]['data']['words'][current_index];
current['index']++ //index inside test_dict would get added to

Perhaps you could try Proxy object:
const dict = {
current: {
index: 1,
section: "test1"
},
test1: {
data: {
words: ["test1 index0", "test1 index1", "test1 index2"]
}
},
test2: {
data: {
words: ["test2 index0", "test2 index1", "test2 index2"],
other: {
sub1: {
sub1_1: ["some", "text", "blah"],
sub1_2: "single string",
sub1_3: {}
}
}
},
blah: {
sub1: {
sub1_4: 123456
}
}
}
}
const test_dict = new Proxy(dict, {
get: function (target, key, receiver)
{
const data = target[dict.current.section] && target[dict.current.section][key] || target[key];
if (typeof data === 'object' && data !== null && !(data instanceof Array))
return new Proxy(data, this)
return data instanceof Array && data[dict.current.index] || data || target;
}
});
console.log("[data][words]", test_dict['data']['words']);
test_dict.current.index = 2
console.log("[data][words]", test_dict['data']['words']);
test_dict.current.section = "test2"
test_dict.current.index = 0
console.log("[data][words]", test_dict['data']['words']);
console.log("data.words", test_dict.data.words);
console.log("data", test_dict.data);
console.log("sub1", test_dict['data']['other']['sub1']);
console.log("sub1_1", test_dict['data']['other']['sub1']['sub1_1']);
console.log("sub1_2", test_dict['data']['other']['sub1']['sub1_2']);
console.log("sub1_3", test_dict['data']['other']['sub1']['sub1_3']);
console.log("blah.sub1_4", test_dict['blah']['sub1']['sub1_4']);

Related

How to inject values from an array into an object using JavaScript?

I would like to extract values from an object (done), which get put into an array (done), then those values are changed (by tweening library) and returned to me as an array of values.
I would like to insert those values back into an object of the same shape from whence they came.
But I'm stuck on something fairly basic, and certainly do-able.
I have an example state, like so (it could be a totally different shape, this is just an example):
var state = {
ignore: "me",
count: 0,
foo: 10,
bar: {
baz: 99
}
}
I have a new state, that I want to pass into my tweening method:
var newState = {
count: 100,
foo: 50,
bar: {
baz: 999
}
}
There's a tween library in the tweenState method, that produces an array of these values at each "frame" of the animation:
// NOTE: I only pass in the properties I wanna tween!!
myApp.tweenState({ count: 100, foo: 50, bar: { baz: 999 } })
// internally, the tween lib produces something like this on each frame:
tweenedValues = [ 50.1231, 34.43543, 456.4543 ]
I would like to insert these tweened values into an object of the same shape as the state object I'm using, to create this on each frame (as per example state above):
tweenedState = {
ignore: "me",
count: 50.1231,
foo: 34.43543,
bar: {
baz: 456.4543
}
}
...so far, I only have this terrible code (called on each frame):
// make sure tweened values are in an array
var valuesArr = Array.isArray(tweenedValues) ? tweenedValues : [tweenedValues]
// this object will hold tween values of current frame/progress,
// set to original state for now... we'll update it's values from
// valuesArr later
var tweenedState = self.state
// set the newState properties with new values from valuesArr
// (newState is the state passed into the tweenState() method)
Object.keys(newState).forEach((key, index) => {
if (typeof newState[key] === "object") {
Object.keys(newState[key]).forEach(key2 => {
tweenedState[key][key2] = valuesArr[index]
})
} else {
tweenedState[key] = valuesArr[index]
}
})
console.log("tweenedState: ", tweenedState)
Which has these obvious problems:
not recursive, can't go more than 2 levels deep into an object
in any case, the line tweenedState[key][key2] = valuesArr[index] doesn't set the value as expected
when I made it into a recursive function, it looped forever and crashed
So, I need a function that takes the array, and inserts the values into the correct place - namely the properties passed in to begin with (which creates the tweenedState object).
EDIT: Obviously, the state object may look totally different - the one given is just an example - It may be many levels deep, and may contain other stuff NOT passed in.. The key point is that I end up with a state object exactly like the original, but with the tweened values inserted instead.
And I repeat - the Tween library creates the array of values, not me, not my choice. And yes I know object properties are not always in the same order.
EDIT 2: this code has to be isomorphic - working in recent browsers (don't care about IE) and Node 10 or later, ideally without polyfills...
EDIT 3: NOW SOLVED:
Both NinaScholz and mashi have provided answers that worked for me (after I fixed a bug elsewhere).
Ninas answer has stricter JS version requirements, and is a little less portable than mashis answer. On that basis I have accepted mashis answer, though Ninas answer is very nice, too.
Thanks.
function setTweenedValues(state, values) {
const reducer = (newState, [key, val]) => {
newState[key] = val;
if (typeof val === "number") {
newState[key] = values.shift();
}
if (typeof val === "object") {
newState[key] = Object.entries(val).reduce(reducer, {});
}
return newState;
};
const newState = Object.entries(state).reduce(reducer, {});
return newState;
}
var state = { count: 200, foo: 10, bar: { zzz: 999 }, ignore: "me" },
tweenedValues = [50.1231, 34.43543, 456.4543],
tweenedState = setTweenedValues(state, [...tweenedValues]);
console.log(tweenedState);
You could iterate the entries and call the function again for nested entries.
function setValues(pattern, values) {
return Object.fromEntries(Object
.entries(pattern)
.map(([k, v]) => [
k,
v && typeof v === 'object'
? setValues(v, values)
: values.length ? values.shift() : v
])
);
}
var state = { count: 200, foo: 10, bar: { zzz: 999 }, ignore: "me" },
tweenedValues = [50.1231, 34.43543, 456.4543],
tweenedState = setValues(state, [...tweenedValues]);
console.log(tweenedState);
as i see it you have values in an array that are always in a guaranteed order, and you want them as prop values in an object... you could use object destructuring
const [count, foo, bar] = tweenedValues;
then make object like this
let obj = {count, foo, bar}

JavaScript: Access object field that has dot as key [duplicate]

Given a JavaScript object,
var obj = { a: { b: '1', c: '2' } }
and a string
"a.b"
how can I convert the string to dot notation so I can go
var val = obj.a.b
If the string was just 'a', I could use obj[a]. But this is more complex. I imagine there is some straightforward method, but it escapes me at present.
recent note: While I'm flattered that this answer has gotten many upvotes, I am also somewhat horrified. If one needs to convert dot-notation strings like "x.a.b.c" into references, it could (maybe) be a sign that there is something very wrong going on (unless maybe you're performing some strange deserialization).
That is to say, novices who find their way to this answer must ask themselves the question "why am I doing this?"
It is of course generally fine to do this if your use case is small and you will not run into performance issues, AND you won't need to build upon your abstraction to make it more complicated later. In fact, if this will reduce code complexity and keep things simple, you should probably go ahead and do what OP is asking for. However, if that's not the case, consider if any of these apply:
case 1: As the primary method of working with your data (e.g. as your app's default form of passing objects around and dereferencing them). Like asking "how can I look up a function or variable name from a string".
This is bad programming practice (unnecessary metaprogramming specifically, and kind of violates function side-effect-free coding style, and will have performance hits). Novices who find themselves in this case, should instead consider working with array representations, e.g. ['x','a','b','c'], or even something more direct/simple/straightforward if possible: like not losing track of the references themselves in the first place (most ideal if it's only client-side or only server-side), etc. (A pre-existing unique id would be inelegant to add, but could be used if the spec otherwise requires its existence regardless.)
case 2: Working with serialized data, or data that will be displayed to the user. Like using a date as a string "1999-12-30" rather than a Date object (which can cause timezone bugs or added serialization complexity if not careful). Or you know what you're doing.
This is maybe fine. Be careful that there are no dot strings "." in your sanitized input fragments.
If you find yourself using this answer all the time and converting back and forth between string and array, you may be in the bad case, and should consider an alternative.
Here's an elegant one-liner that's 10x shorter than the other solutions:
function index(obj,i) {return obj[i]}
'a.b.etc'.split('.').reduce(index, obj)
[edit] Or in ECMAScript 6:
'a.b.etc'.split('.').reduce((o,i)=> o[i], obj)
(Not that I think eval always bad like others suggest it is (though it usually is), nevertheless those people will be pleased that this method doesn't use eval. The above will find obj.a.b.etc given obj and the string "a.b.etc".)
In response to those who still are afraid of using reduce despite it being in the ECMA-262 standard (5th edition), here is a two-line recursive implementation:
function multiIndex(obj,is) { // obj,['1','2','3'] -> ((obj['1'])['2'])['3']
return is.length ? multiIndex(obj[is[0]],is.slice(1)) : obj
}
function pathIndex(obj,is) { // obj,'1.2.3' -> multiIndex(obj,['1','2','3'])
return multiIndex(obj,is.split('.'))
}
pathIndex('a.b.etc')
Depending on the optimizations the JS compiler is doing, you may want to make sure any nested functions are not re-defined on every call via the usual methods (placing them in a closure, object, or global namespace).
edit:
To answer an interesting question in the comments:
how would you turn this into a setter as well? Not only returning the values by path, but also setting them if a new value is sent into the function? – Swader Jun 28 at 21:42
(sidenote: sadly can't return an object with a Setter, as that would violate the calling convention; commenter seems to instead be referring to a general setter-style function with side-effects like index(obj,"a.b.etc", value) doing obj.a.b.etc = value.)
The reduce style is not really suitable to that, but we can modify the recursive implementation:
function index(obj,is, value) {
if (typeof is == 'string')
return index(obj,is.split('.'), value);
else if (is.length==1 && value!==undefined)
return obj[is[0]] = value;
else if (is.length==0)
return obj;
else
return index(obj[is[0]],is.slice(1), value);
}
Demo:
> obj = {a:{b:{etc:5}}}
> index(obj,'a.b.etc')
5
> index(obj,['a','b','etc']) #works with both strings and lists
5
> index(obj,'a.b.etc', 123) #setter-mode - third argument (possibly poor form)
123
> index(obj,'a.b.etc')
123
...though personally I'd recommend making a separate function setIndex(...). I would like to end on a side-note that the original poser of the question could (should?) be working with arrays of indices (which they can get from .split), rather than strings; though there's usually nothing wrong with a convenience function.
A commenter asked:
what about arrays? something like "a.b[4].c.d[1][2][3]" ? –AlexS
Javascript is a very weird language; in general objects can only have strings as their property keys, so for example if x was a generic object like x={}, then x[1] would become x["1"]... you read that right... yup...
Javascript Arrays (which are themselves instances of Object) specifically encourage integer keys, even though you could do something like x=[]; x["puppy"]=5;.
But in general (and there are exceptions), x["somestring"]===x.somestring (when it's allowed; you can't do x.123).
(Keep in mind that whatever JS compiler you're using might choose, maybe, to compile these down to saner representations if it can prove it would not violate the spec.)
So the answer to your question would depend on whether you're assuming those objects only accept integers (due to a restriction in your problem domain), or not. Let's assume not. Then a valid expression is a concatenation of a base identifier plus some .identifiers plus some ["stringindex"]s.
Let us ignore for a moment that we can of course do other things legitimately in the grammar like identifier[0xFA7C25DD].asdf[f(4)?.[5]+k][false][null][undefined][NaN]; integers are not (that) 'special'.
Commenter's statement would then be equivalent to a["b"][4]["c"]["d"][1][2][3], though we should probably also support a.b["c\"validjsstringliteral"][3]. You'd have to check the ecmascript grammar section on string literals to see how to parse a valid string literal. Technically you'd also want to check (unlike in my first answer) that a is a valid javascript identifier.
A simple answer to your question though, if your strings don't contain commas or brackets, would be just be to match length 1+ sequences of characters not in the set , or [ or ]:
> "abc[4].c.def[1][2][\"gh\"]".match(/[^\]\[.]+/g)
// ^^^ ^ ^ ^^^ ^ ^ ^^^^^
["abc", "4", "c", "def", "1", "2", ""gh""]
If your strings don't contain escape characters or " characters, and because IdentifierNames are a sublanguage of StringLiterals (I think???) you could first convert your dots to []:
> var R=[], demoString="abc[4].c.def[1][2][\"gh\"]";
> for(var match,matcher=/^([^\.\[]+)|\.([^\.\[]+)|\["([^"]+)"\]|\[(\d+)\]/g;
match=matcher.exec(demoString); ) {
R.push(Array.from(match).slice(1).filter(x=> x!==undefined)[0]);
// extremely bad code because js regexes are weird, don't use this
}
> R
["abc", "4", "c", "def", "1", "2", "gh"]
Of course, always be careful and never trust your data. Some bad ways to do this that might work for some use cases also include:
// hackish/wrongish; preprocess your string into "a.b.4.c.d.1.2.3", e.g.:
> yourstring.replace(/]/g,"").replace(/\[/g,".").split(".")
"a.b.4.c.d.1.2.3" //use code from before
Special 2018 edit:
Let's go full-circle and do the most inefficient, horribly-overmetaprogrammed solution we can come up with... in the interest of syntactical purityhamfistery. With ES6 Proxy objects!... Let's also define some properties which (imho are fine and wonderful but) may break improperly-written libraries. You should perhaps be wary of using this if you care about performance, sanity (yours or others'), your job, etc.
// [1,2,3][-1]==3 (or just use .slice(-1)[0])
if (![1][-1])
Object.defineProperty(Array.prototype, -1, {get() {return this[this.length-1]}}); //credit to caub
// WARNING: THIS XTREME™ RADICAL METHOD IS VERY INEFFICIENT,
// ESPECIALLY IF INDEXING INTO MULTIPLE OBJECTS,
// because you are constantly creating wrapper objects on-the-fly and,
// even worse, going through Proxy i.e. runtime ~reflection, which prevents
// compiler optimization
// Proxy handler to override obj[*]/obj.* and obj[*]=...
var hyperIndexProxyHandler = {
get: function(obj,key, proxy) {
return key.split('.').reduce((o,i)=> o[i], obj);
},
set: function(obj,key,value, proxy) {
var keys = key.split('.');
var beforeLast = keys.slice(0,-1).reduce((o,i)=> o[i], obj);
beforeLast[keys[-1]] = value;
},
has: function(obj,key) {
//etc
}
};
function hyperIndexOf(target) {
return new Proxy(target, hyperIndexProxyHandler);
}
Demo:
var obj = {a:{b:{c:1, d:2}}};
console.log("obj is:", JSON.stringify(obj));
var objHyper = hyperIndexOf(obj);
console.log("(proxy override get) objHyper['a.b.c'] is:", objHyper['a.b.c']);
objHyper['a.b.c'] = 3;
console.log("(proxy override set) objHyper['a.b.c']=3, now obj is:", JSON.stringify(obj));
console.log("(behind the scenes) objHyper is:", objHyper);
if (!({}).H)
Object.defineProperties(Object.prototype, {
H: {
get: function() {
return hyperIndexOf(this); // TODO:cache as a non-enumerable property for efficiency?
}
}
});
console.log("(shortcut) obj.H['a.b.c']=4");
obj.H['a.b.c'] = 4;
console.log("(shortcut) obj.H['a.b.c'] is obj['a']['b']['c'] is", obj.H['a.b.c']);
Output:
obj is: {"a":{"b":{"c":1,"d":2}}}
(proxy override get) objHyper['a.b.c'] is: 1
(proxy override set) objHyper['a.b.c']=3, now obj is: {"a":{"b":{"c":3,"d":2}}}
(behind the scenes) objHyper is: Proxy {a: {…}}
(shortcut) obj.H['a.b.c']=4
(shortcut) obj.H['a.b.c'] is obj['a']['b']['c'] is: 4
inefficient idea: You can modify the above to dispatch based on the input argument; either use the .match(/[^\]\[.]+/g) method to support obj['keys'].like[3]['this'], or if instanceof Array, then just accept an Array as input like keys = ['a','b','c']; obj.H[keys].
Per suggestion that maybe you want to handle undefined indices in a 'softer' NaN-style manner (e.g. index({a:{b:{c:...}}}, 'a.x.c') return undefined rather than uncaught TypeError)...:
This makes sense from the perspective of "we should return undefined rather than throw an error" in the 1-dimensional index situation ({})['e.g.']==undefined, so "we should return undefined rather than throw an error" in the N-dimensional situation.
This does not make sense from the perspective that we are doing x['a']['x']['c'], which would fail with a TypeError in the above example.
That said, you'd make this work by replacing your reducing function with either:
(o,i)=> o===undefined?undefined:o[i], or
(o,i)=> (o||{})[i].
(You can make this more efficient by using a for loop and breaking/returning whenever the subresult you'd next index into is undefined, or using a try-catch if you expect such failures to be sufficiently rare.)
If you can use Lodash, there is a function, which does exactly that:
_.get(object, path, [defaultValue])
var val = _.get(obj, "a.b");
You could use lodash.get
After installing (npm i lodash.get), use it like this:
const get = require('lodash.get');
const myObj = {
user: {
firstName: 'Stacky',
lastName: 'Overflowy',
list: ['zero', 'one', 'two']
},
id: 123
};
console.log(get(myObj, 'user.firstName')); // outputs Stacky
console.log(get(myObj, 'id')); // outputs 123
console.log(get(myObj, 'user.list[1]')); // outputs one
// You can also update values
get(myObj, 'user').firstName = 'John';
A little more involved example with recursion.
function recompose(obj, string) {
var parts = string.split('.');
var newObj = obj[parts[0]];
if (parts[1]) {
parts.splice(0, 1);
var newString = parts.join('.');
return recompose(newObj, newString);
}
return newObj;
}
var obj = { a: { b: '1', c: '2', d:{a:{b:'blah'}}}};
console.log(recompose(obj, 'a.d.a.b')); //blah
2021
You don't need to pull in another dependency every time you wish for new capabilities in your program. Modern JS is very capable and the optional-chaining operator ?. is now widely supported and makes this kind of task easy as heck.
With a single line of code we can write get that takes an input object, t and string path. It works for object and arrays of any nesting level -
const get = (t, path) =>
path.split(".").reduce((r, k) => r?.[k], t)
const mydata =
{ a: { b: [ 0, { c: { d: [ "hello", "world" ] } } ] } }
console.log(get(mydata, "a.b.1.c.d.0"))
console.log(get(mydata, "a.b.1.c.d.1"))
console.log(get(mydata, "a.b.x.y.z"))
"hello"
"world"
undefined
I suggest to split the path and iterate it and reduce the object you have. This proposal works with a default value for missing properties.
const getValue = (object, keys) => keys.split('.').reduce((o, k) => (o || {})[k], object);
console.log(getValue({ a: { b: '1', c: '2' } }, 'a.b'));
console.log(getValue({ a: { b: '1', c: '2' } }, 'foo.bar.baz'));
Many years since the original post.
Now there is a great library called 'object-path'.
https://github.com/mariocasciaro/object-path
Available on NPM and BOWER
https://www.npmjs.com/package/object-path
It's as easy as:
objectPath.get(obj, "a.c.1"); //returns "f"
objectPath.set(obj, "a.j.0.f", "m");
And works for deeply nested properties and arrays.
If you expect to dereference the same path many times, building a function for each dot notation path actually has the best performance by far (expanding on the perf tests James Wilkins linked to in comments above).
var path = 'a.b.x';
var getter = new Function("obj", "return obj." + path + ";");
getter(obj);
Using the Function constructor has some of the same drawbacks as eval() in terms of security and worst-case performance, but IMO it's a badly underused tool for cases where you need a combination of extreme dynamism and high performance. I use this methodology to build array filter functions and call them inside an AngularJS digest loop. My profiles consistently show the array.filter() step taking less than 1ms to dereference and filter about 2000 complex objects, using dynamically-defined paths 3-4 levels deep.
A similar methodology could be used to create setter functions, of course:
var setter = new Function("obj", "newval", "obj." + path + " = newval;");
setter(obj, "some new val");
Other proposals are a little cryptic, so I thought I'd contribute:
Object.prop = function(obj, prop, val){
var props = prop.split('.')
, final = props.pop(), p
while(p = props.shift()){
if (typeof obj[p] === 'undefined')
return undefined;
obj = obj[p]
}
return val ? (obj[final] = val) : obj[final]
}
var obj = { a: { b: '1', c: '2' } }
// get
console.log(Object.prop(obj, 'a.c')) // -> 2
// set
Object.prop(obj, 'a.c', function(){})
console.log(obj) // -> { a: { b: '1', c: [Function] } }
var a = { b: { c: 9 } };
function value(layer, path, value) {
var i = 0,
path = path.split('.');
for (; i < path.length; i++)
if (value != null && i + 1 === path.length)
layer[path[i]] = value;
layer = layer[path[i]];
return layer;
};
value(a, 'b.c'); // 9
value(a, 'b.c', 4);
value(a, 'b.c'); // 4
This is a lot of code when compared to the much simpler eval way of doing it, but like Simon Willison says, you should never use eval.
Also, JSFiddle.
You can use the library available at npm, which simplifies this process. https://www.npmjs.com/package/dot-object
var dot = require('dot-object');
var obj = {
some: {
nested: {
value: 'Hi there!'
}
}
};
var val = dot.pick('some.nested.value', obj);
console.log(val);
// Result: Hi there!
Note if you're already using Lodash you can use the property or get functions:
var obj = { a: { b: '1', c: '2' } };
_.property('a.b')(obj); // => 1
_.get(obj, 'a.b'); // => 1
Underscore.js also has a property function, but it doesn't support dot notation.
I have extended the elegant answer by ninjagecko so that the function handles both dotted and/or array style references, and so that an empty string causes the parent object to be returned.
Here you go:
string_to_ref = function (object, reference) {
function arr_deref(o, ref, i) { return !ref ? o : (o[ref.slice(0, i ? -1 : ref.length)]) }
function dot_deref(o, ref) { return ref.split('[').reduce(arr_deref, o); }
return !reference ? object : reference.split('.').reduce(dot_deref, object);
};
See my working jsFiddle example here: http://jsfiddle.net/sc0ttyd/q7zyd/
You can obtain value of an object member by dot notation with a single line of code:
new Function('_', 'return _.' + path)(obj);
In you case:
var obj = { a: { b: '1', c: '2' } }
var val = new Function('_', 'return _.a.b')(obj);
To make it simple you may write a function like this:
function objGet(obj, path){
return new Function('_', 'return _.' + path)(obj);
}
Explanation:
The Function constructor creates a new Function object. In JavaScript every function is actually a Function object. Syntax to create a function explicitly with Function constructor is:
new Function ([arg1[, arg2[, ...argN]],] functionBody)
where arguments(arg1 to argN) must be a string that corresponds to a valid javaScript identifier and functionBody is a string containing the javaScript statements comprising the function definition.
In our case we take the advantage of string function body to retrieve object member with dot notation.
Hope it helps.
var find = function(root, path) {
var segments = path.split('.'),
cursor = root,
target;
for (var i = 0; i < segments.length; ++i) {
target = cursor[segments[i]];
if (typeof target == "undefined") return void 0;
cursor = target;
}
return cursor;
};
var obj = { a: { b: '1', c: '2' } }
find(obj, "a.b"); // 1
var set = function (root, path, value) {
var segments = path.split('.'),
cursor = root,
target;
for (var i = 0; i < segments.length - 1; ++i) {
cursor = cursor[segments[i]] || { };
}
cursor[segments[segments.length - 1]] = value;
};
set(obj, "a.k", function () { console.log("hello world"); });
find(obj, "a.k")(); // hello world
Use this function:
function dotToObject(data) {
function index(parent, key, value) {
const [mainKey, ...children] = key.split(".");
parent[mainKey] = parent[mainKey] || {};
if (children.length === 1) {
parent[mainKey][children[0]] = value;
} else {
index(parent[mainKey], children.join("."), value);
}
}
const result = Object.entries(data).reduce((acc, [key, value]) => {
if (key.includes(".")) {
index(acc, key, value);
} else {
acc[key] = value;
}
return acc;
}, {});
return result;
}
module.exports = { dotToObject };
Ex:
const user = {
id: 1,
name: 'My name',
'address.zipCode': '123',
'address.name': 'Some name',
'address.something.id': 1,
}
const mappedUser = dotToObject(user)
console.log(JSON.stringify(mappedUser, null, 2))
Output:
{
"id": 1,
"name": "My name",
"address": {
"zipCode": "123",
"name": "Some name",
"something": {
"id": 1
}
}
}
using Array Reduce function will get/set based on path provided.
I tested it with a.b.c and a.b.2.c {a:{b:[0,1,{c:7}]}} and its works for both getting key or mutating object to set value
function setOrGet(obj, path=[], newValue){
const l = typeof path === 'string' ? path.split('.') : path;
return l.reduce((carry,item, idx)=>{
const leaf = carry[item];
// is this last item in path ? cool lets set/get value
if( l.length-idx===1) {
// mutate object if newValue is set;
carry[item] = newValue===undefined ? leaf : newValue;
// return value if its a get/object if it was a set
return newValue===undefined ? leaf : obj ;
}
carry[item] = leaf || {}; // mutate if key not an object;
return carry[item]; // return object ref: to continue reduction;
}, obj)
}
console.log(
setOrGet({a: {b:1}},'a.b') === 1 ||
'Test Case: Direct read failed'
)
console.log(
setOrGet({a: {b:1}},'a.c',22).a.c===22 ||
'Test Case: Direct set failed'
)
console.log(
setOrGet({a: {b:[1,2]}},'a.b.1',22).a.b[1]===22 ||
'Test Case: Direct set on array failed'
)
console.log(
setOrGet({a: {b:{c: {e:1} }}},'a.b.c.e',22).a.b.c. e===22 ||
'Test Case: deep get failed'
)
// failed !. Thats your homework :)
console.log(
setOrGet({a: {b:{c: {e:[1,2,3,4,5]} }}},'a.b.c.e.3 ',22)
)
my personal recommendation.
do not use such a thing unless there is no other way!
i saw many examples people use it for translations for example from json; so you see function like locale('app.homepage.welcome') . this is just bad. if you already have data in an object/json; and you know path.. then just use it directly example locale().app.homepage.welcome by changing you function to return object you get typesafe, with autocomplete, less prone to typo's ..
I copied the following from Ricardo Tomasi's answer and modified to also create sub-objects that don't yet exist as necessary. It's a little less efficient (more ifs and creating of empty objects), but should be pretty good.
Also, it'll allow us to do Object.prop(obj, 'a.b', false) where we couldn't before. Unfortunately, it still won't let us assign undefined...Not sure how to go about that one yet.
/**
* Object.prop()
*
* Allows dot-notation access to object properties for both getting and setting.
*
* #param {Object} obj The object we're getting from or setting
* #param {string} prop The dot-notated string defining the property location
* #param {mixed} val For setting only; the value to set
*/
Object.prop = function(obj, prop, val){
var props = prop.split('.'),
final = props.pop(),
p;
for (var i = 0; i < props.length; i++) {
p = props[i];
if (typeof obj[p] === 'undefined') {
// If we're setting
if (typeof val !== 'undefined') {
// If we're not at the end of the props, keep adding new empty objects
if (i != props.length)
obj[p] = {};
}
else
return undefined;
}
obj = obj[p]
}
return typeof val !== "undefined" ? (obj[final] = val) : obj[final]
}
Few years later, I found this that handles scope and array. e.g. a['b']["c"].d.etc
function getScopedObj(scope, str) {
let obj=scope, arr;
try {
arr = str.split(/[\[\]\.]/) // split by [,],.
.filter(el => el) // filter out empty one
.map(el => el.replace(/^['"]+|['"]+$/g, '')); // remove string quotation
arr.forEach(el => obj = obj[el])
} catch(e) {
obj = undefined;
}
return obj;
}
window.a = {b: {c: {d: {etc: 'success'}}}}
getScopedObj(window, `a.b.c.d.etc`) // success
getScopedObj(window, `a['b']["c"].d.etc`) // success
getScopedObj(window, `a['INVALID']["c"].d.etc`) // undefined
If you wish to convert any object that contains dot notation keys into an arrayed version of those keys you can use this.
This will convert something like
{
name: 'Andy',
brothers.0: 'Bob'
brothers.1: 'Steve'
brothers.2: 'Jack'
sisters.0: 'Sally'
}
to
{
name: 'Andy',
brothers: ['Bob', 'Steve', 'Jack']
sisters: ['Sally']
}
convertDotNotationToArray(objectWithDotNotation) {
Object.entries(objectWithDotNotation).forEach(([key, val]) => {
// Is the key of dot notation
if (key.includes('.')) {
const [name, index] = key.split('.');
// If you have not created an array version, create one
if (!objectWithDotNotation[name]) {
objectWithDotNotation[name] = new Array();
}
// Save the value in the newly created array at the specific index
objectWithDotNotation[name][index] = val;
// Delete the current dot notation key val
delete objectWithDotNotation[key];
}
});
}
If you want to convert a string dot notation into an object, I've made a handy little helper than can turn a string like a.b.c.d with a value of e with dotPathToObject("a.b.c.d", "value") returning this:
{
"a": {
"b": {
"c": {
"d": "value"
}
}
}
}
https://gist.github.com/ahallora/9731d73efb15bd3d3db647efa3389c12
Solution:
function deepFind(key, data){
return key.split('.').reduce((ob,i)=> ob?.[i], data)
}
Usage:
const obj = {
company: "Pet Shop",
person: {
name: "John"
},
animal: {
name: "Lucky"
}
}
const company = deepFind("company", obj)
const personName = deepFind("person.name", obj)
const animalName = deepFind("animal.name", obj)
Here is my implementation
Implementation 1
Object.prototype.access = function() {
var ele = this[arguments[0]];
if(arguments.length === 1) return ele;
return ele.access.apply(ele, [].slice.call(arguments, 1));
}
Implementation 2 (using array reduce instead of slice)
Object.prototype.access = function() {
var self = this;
return [].reduce.call(arguments,function(prev,cur) {
return prev[cur];
}, self);
}
Examples:
var myobj = {'a':{'b':{'c':{'d':'abcd','e':[11,22,33]}}}};
myobj.access('a','b','c'); // returns: {'d':'abcd', e:[0,1,2,3]}
myobj.a.b.access('c','d'); // returns: 'abcd'
myobj.access('a','b','c','e',0); // returns: 11
it can also handle objects inside arrays as for
var myobj2 = {'a': {'b':[{'c':'ab0c'},{'d':'ab1d'}]}}
myobj2.access('a','b','1','d'); // returns: 'ab1d'
I used this code in my project
const getValue = (obj, arrPath) => (
arrPath.reduce((x, y) => {
if (y in x) return x[y]
return {}
}, obj)
)
Usage:
const obj = { id: { user: { local: 104 } } }
const path = [ 'id', 'user', 'local' ]
getValue(obj, path) // return 104
Using object-scan seems a bit overkill, but you can simply do
// const objectScan = require('object-scan');
const get = (obj, p) => objectScan([p], { abort: true, rtn: 'value' })(obj);
const obj = { a: { b: '1', c: '2' } };
console.log(get(obj, 'a.b'));
// => 1
console.log(get(obj, '*.c'));
// => 2
.as-console-wrapper {max-height: 100% !important; top: 0}
<script src="https://bundle.run/object-scan#13.7.1"></script>
Disclaimer: I'm the author of object-scan
There are a lot more advanced examples in the readme.
This is one of those cases, where you ask 10 developers and you get 10 answers.
Below is my [simplified] solution for OP, using dynamic programming.
The idea is that you would pass an existing DTO object that you wish to UPDATE. This makes the method most useful in the case where you have a form with several input elements having name attributes set with dot (fluent) syntax.
Example use:
<input type="text" name="person.contact.firstName" />
Code snippet:
const setFluently = (obj, path, value) => {
if (typeof path === "string") {
return setFluently(obj, path.split("."), value);
}
if (path.length <= 1) {
obj[path[0]] = value;
return obj;
}
const key = path[0];
obj[key] = setFluently(obj[key] ? obj[key] : {}, path.slice(1), value);
return obj;
};
const origObj = {
a: {
b: "1",
c: "2"
}
};
setFluently(origObj, "a.b", "3");
setFluently(origObj, "a.c", "4");
console.log(JSON.stringify(origObj, null, 3));
function at(obj, path, val = undefined) {
// If path is an Array,
if (Array.isArray(path)) {
// it returns the mapped array for each result of the path
return path.map((path) => at(obj, path, val));
}
// Uniting several RegExps into one
const rx = new RegExp(
[
/(?:^(?:\.\s*)?([_a-zA-Z][_a-zA-Z0-9]*))/,
/(?:^\[\s*(\d+)\s*\])/,
/(?:^\[\s*'([^']*(?:\\'[^']*)*)'\s*\])/,
/(?:^\[\s*"([^"]*(?:\\"[^"]*)*)"\s*\])/,
/(?:^\[\s*`([^`]*(?:\\`[^`]*)*)`\s*\])/,
]
.map((r) => r.source)
.join("|")
);
let rm;
while (rm = rx.exec(path.trim())) {
// Matched resource
let [rf, rp] = rm.filter(Boolean);
// If no one matches found,
if (!rm[1] && !rm[2]) {
// it will replace escape-chars
rp = rp.replace(/\\(.)/g, "$1");
}
// If the new value is set,
if ("undefined" != typeof val && path.length == rf.length) {
// assign a value to the object property and return it
return (obj[rp] = val);
}
// Going one step deeper
obj = obj[rp];
// Removing a step from the path
path = path.substr(rf.length).trim();
}
if (path) {
throw new SyntaxError();
}
return obj;
}
// Test object schema
let o = { a: { b: [ [ { c: { d: { '"e"': { f: { g: "xxx" } } } } } ] ] } };
// Print source object
console.log(JSON.stringify(o));
// Set value
console.log(at(o, '.a["b"][0][0].c[`d`]["\\"e\\""][\'f\']["g"]', "zzz"));
// Get value
console.log(at(o, '.a["b"][0][0].c[`d`]["\\"e\\""][\'f\']["g"]'));
// Print result object
console.log(JSON.stringify(o));
Here is my code without using eval. It’s easy to understand too.
function value(obj, props) {
if (!props)
return obj;
var propsArr = props.split('.');
var prop = propsArr.splice(0, 1);
return value(obj[prop], propsArr.join('.'));
}
var obj = { a: { b: '1', c: '2', d:{a:{b:'blah'}}}};
console.log(value(obj, 'a.d.a.b')); // Returns blah
Yes, extending base prototypes is not usually good idea but, if you keep all extensions in one place, they might be useful.
So, here is my way to do this.
Object.defineProperty(Object.prototype, "getNestedProperty", {
value : function (propertyName) {
var result = this;
var arr = propertyName.split(".");
while (arr.length && result) {
result = result[arr.shift()];
}
return result;
},
enumerable: false
});
Now you will be able to get nested property everywhere without importing module with function or copy/pasting function.
Example:
{a:{b:11}}.getNestedProperty('a.b'); // Returns 11
The Next.js extension broke Mongoose in my project. Also I've read that it might break jQuery. So, never do it in the Next.js way:
Object.prototype.getNestedProperty = function (propertyName) {
var result = this;
var arr = propertyName.split(".");
while (arr.length && result) {
result = result[arr.shift()];
}
return result;
};
This is my extended solution proposed by ninjagecko.
For me, simple string notation was not enough, so the below version supports things like:
index(obj, 'data.accounts[0].address[0].postcode');
 
/**
* Get object by index
* #supported
* - arrays supported
* - array indexes supported
* #not-supported
* - multiple arrays
* #issues:
* index(myAccount, 'accounts[0].address[0].id') - works fine
* index(myAccount, 'accounts[].address[0].id') - doesnt work
* #Example:
* index(obj, 'data.accounts[].id') => returns array of id's
* index(obj, 'data.accounts[0].id') => returns id of 0 element from array
* index(obj, 'data.accounts[0].addresses.list[0].id') => error
* #param obj
* #param path
* #returns {any}
*/
var index = function(obj, path, isArray?, arrIndex?){
// is an array
if(typeof isArray === 'undefined') isArray = false;
// array index,
// if null, will take all indexes
if(typeof arrIndex === 'undefined') arrIndex = null;
var _arrIndex = null;
var reduceArrayTag = function(i, subArrIndex){
return i.replace(/(\[)([\d]{0,})(\])/, (i) => {
var tmp = i.match(/(\[)([\d]{0,})(\])/);
isArray = true;
if(subArrIndex){
_arrIndex = (tmp[2] !== '') ? tmp[2] : null;
}else{
arrIndex = (tmp[2] !== '') ? tmp[2] : null;
}
return '';
});
}
function byIndex(obj, i) {
// if is an array
if(isArray){
isArray = false;
i = reduceArrayTag(i, true);
// if array index is null,
// return an array of with values from every index
if(!arrIndex){
var arrValues = [];
_.forEach(obj, (el) => {
arrValues.push(index(el, i, isArray, arrIndex));
})
return arrValues;
}
// if array index is specified
var value = obj[arrIndex][i];
if(isArray){
arrIndex = _arrIndex;
}else{
arrIndex = null;
}
return value;
}else{
// remove [] from notation,
// if [] has been removed, check the index of array
i = reduceArrayTag(i, false);
return obj[i]
}
}
// reduce with the byIndex method
return path.split('.').reduce(byIndex, obj)
}

Design pattern to check if a JavaScript object has changed

I get from the server a list of objects
[{name:'test01', age:10},{name:'test02', age:20},{name:'test03', age:30}]
I load them into html controls for the user to edit.
Then there is a button to bulk save the entire list back to the database.
Instead of sending the whole list I only want to send the subset of objects that were changed.
It can be any number of items in the array. I want to do something similar to frameworks like Angular that mark an object property like "pristine" when no change has been done to it. Then use that flag to only post to the server the items that are not "pristine", the ones that were modified.
Here is a function down below that will return an array/object of changed objects when supplied with an old array/object of objects and a new array of objects:
// intended to compare objects of identical shape; ideally static.
//
// any top-level key with a primitive value which exists in `previous` but not
// in `current` returns `undefined` while vice versa yields a diff.
//
// in general, the input type determines the output type. that is if `previous`
// and `current` are objects then an object is returned. if arrays then an array
// is returned, etc.
const getChanges = (previous, current) => {
if (isPrimitive(previous) && isPrimitive(current)) {
if (previous === current) {
return "";
}
return current;
}
if (isObject(previous) && isObject(current)) {
const diff = getChanges(Object.entries(previous), Object.entries(current));
return diff.reduce((merged, [key, value]) => {
return {
...merged,
[key]: value
}
}, {});
}
const changes = [];
if (JSON.stringify(previous) === JSON.stringify(current)) {
return changes;
}
for (let i = 0; i < current.length; i++) {
const item = current[i];
if (JSON.stringify(item) !== JSON.stringify(previous[i])) {
changes.push(item);
}
}
return changes;
};
For Example:
const arr1 = [1, 2, 3, 4]
const arr2 = [4, 4, 2, 4]
console.log(getChanges(arr1, arr2)) // [4,4,2]
const obj1 = {
foo: "bar",
baz: [
1, 2, 3
],
qux: {
hello: "world"
},
bingo: "name-o",
}
const obj2 = {
foo: "barx",
baz: [
1, 2, 3, 4
],
qux: {
hello: null
},
bingo: "name-o",
}
console.log(getChanges(obj1.foo, obj2.foo)) // barx
console.log(getChanges(obj1.bingo, obj2.bingo)) // ""
console.log(getChanges(obj1.baz, obj2.baz)) // [4]
console.log(getChanges(obj1, obj2)) // {foo:'barx',baz:[1,2,3,4],qux:{hello:null}}
const obj3 = [{ name: 'test01', age: 10 }, { name: 'test02', age: 20 }, { name: 'test03', age: 30 }]
const obj4 = [{ name: 'test01', age: 10 }, { name: 'test02', age: 20 }, { name: 'test03', age: 20 }]
console.log(getChanges(obj3, obj4)) // [{name:'test03', age:20}]
Utility functions used:
// not required for this example but aid readability of the main function
const typeOf = o => Object.prototype.toString.call(o);
const isObject = o => o !== null && !Array.isArray(o) && typeOf(o).split(" ")[1].slice(0, -1) === "Object";
const isPrimitive = o => {
switch (typeof o) {
case "object": {
return false;
}
case "function": {
return false;
}
default: {
return true;
}
}
};
You would simply have to export the full list of edited values client side, compare it with the old list, and then send the list of changes off to the server.
Hope this helps!
Here are a few ideas.
Use a framework. You spoke of Angular.
Use Proxies, though Internet Explorer has no support for it.
Instead of using classic properties, maybe use Object.defineProperty's set/get to achieve some kind of change tracking.
Use getter/setting functions to store data instead of properties: getName() and setName() for example. Though this the older way of doing what defineProperty now does.
Whenever you bind your data to your form elements, set a special property that indicates if the property has changed. Something like __hasChanged. Set to true if any property on the object changes.
The old school bruteforce way: keep your original list of data that came from the server, deep copy it into another list, bind your form controls to the new list, then when the user clicks submit, compare the objects in the original list to the objects in the new list, plucking out the changed ones as you go. Probably the easiest, but not necessarily the cleanest.
A different take on #6: Attach a special property to each object that always returns the original version of the object:
var myData = [{name: "Larry", age: 47}];
var dataWithCopyOfSelf = myData.map(function(data) {
Object.assign({}, data, { original: data });
});
// now bind your form to dataWithCopyOfSelf.
Of course, this solution assumes a few things: (1) that your objects are flat and simple since Object.assign() doesn't deep copy, (2) that your original data set will never be changed, and (3) that nothing ever touches the contents of original.
There are a multitude of solutions out there.
With ES6 we can use Proxy
to accomplish this task: intercept an Object write, and mark it as dirty.
Proxy allows to create a handler Object that can trap, manipulate, and than forward changes to the original target Object, basically allowing to reconfigure its behavior.
The trap we're going to adopt to intercept Object writes is the handler set().
At this point we can add a non-enumerable property flag like i.e: _isDirty using Object.defineProperty() to mark our Object as modified, dirty.
When using traps (in our case the handler's set()) no changes are applied nor reflected to the Objects, therefore we need to forward the argument values to the target Object using Reflect.set().
Finally, to retrieve the modified objects, filter() the Array with our proxy Objects in search of those having its own Property "_isDirty".
// From server:
const dataOrg = [
{id:1, name:'a', age:10},
{id:2, name:'b', age:20},
{id:3, name:'c', age:30}
];
// Mirror data from server to observable Proxies:
const data = dataOrg.map(ob => new Proxy(ob, {
set() {
Object.defineProperty(ob, "_isDirty", {value: true}); // Flag
return Reflect.set(...arguments); // Forward trapped args to ob
}
}));
// From now on, use proxied data. Let's change some values:
data[0].name = "Lorem";
data[0].age = 42;
data[2].age = 31;
// Collect modified data
const dataMod = data.filter(ob => ob.hasOwnProperty("_isDirty"));
// Test what we're about to send back to server:
console.log(JSON.stringify(dataMod, null, 2));
Without using .defineProperty()
If for some reason you don't feel comfortable into tapping into the original object adding extra properties as flags, you could instead populate immediately
the dataMod (array with modified Objects) with references:
const dataOrg = [
{id:1, name:'a', age:10},
{id:2, name:'b', age:20},
{id:3, name:'c', age:30}
];
// Prepare array to hold references to the modified Objects
const dataMod = [];
const data = dataOrg.map(ob => new Proxy(ob, {
set() {
if (dataMod.indexOf(ob) < 0) dataMod.push(ob); // Push reference
return Reflect.set(...arguments);
}
}));
data[0].name = "Lorem";
data[0].age = 42;
data[2].age = 31;
console.log(JSON.stringify(dataMod, null, 2));
Can I Use - Proxy (IE)
Proxy - handler.set()
Global Objects - Reflect
Reflect.set()
Object.defineProperty()
Object.hasOwnProperty()
Without having to get fancy with prototype properties you could simply store them in another array whenever your form control element detects a change
Something along the lines of:
var modified = [];
data.forEach(function(item){
var domNode = // whatever you use to match data to form control element
domNode.addEventListener('input',function(){
if(modified.indexOf(item) === -1){
modified.push(item);
}
});
});
Then send the modified array to server when it's time to save
Why not use Ember.js observable properties ? You can use the Ember.observer function to get and set changes in your data.
Ember.Object.extend({
valueObserver: Ember.observer('value', function(sender, key, value, rev) {
// Executes whenever the "value" property changes
// See the addObserver method for more information about the callback arguments
})
});
The Ember.object actually does a lot of heavy lifting for you.
Once you define your object, add an observer like so:
object.addObserver('propertyKey', targetObject, targetAction)
My idea is to sort object keys and convert object to be string to compare:
// use this function to sort keys, and save key=>value in an array
function objectSerilize(obj) {
let keys = Object.keys(obj)
let results = []
keys.sort((a, b) => a > b ? -1 : a < b ? 1 : 0)
keys.forEach(key => {
let value = obj[key]
if (typeof value === 'object') {
value = objectSerilize(value)
}
results.push({
key,
value,
})
})
return results
}
// use this function to compare
function compareObject(a, b) {
let aStr = JSON.stringify(objectSerilize(a))
let bStr = JSON.stringify(objectSerilize(b))
return aStr === bStr
}
This is what I think up.
It would be cleanest, I’d think to have the object emit an event when a property is added or removed or modified.
A simplistic implementation could involve an array with the object keys; whenever a setter or heck the constructor returns this, it first calls a static function returning a promise; resolving: map with changed values in the array: things added, things removed, or neither. So one could get(‘changed’) or so forth; returning an array.
Similarly every setter can emit an event with arguments for initial value and new value.
Assuming classes are used, you could easily have a static method in a parent generic class that can be called through its constructor and so really you could simplify most of this by passing the object either to itself, or to the parent through super(checkMeProperty).

Clone object in JavaScript [duplicate]

This question already has answers here:
How do I correctly clone a JavaScript object?
(81 answers)
Closed 8 years ago.
Consider the below code or check this fiddle.
var obj = {
name: "abc",
age: 20
}
var objTwo;
console.log(obj.age);
objTwo = obj;
objTwo.age = 10;
console.log(obj.age);
I have created an object with name obj and it has two properties. Now I assign obj to another object named objTwo. Now I update one of the properties in objTwo. The same change is reflecting on obj as well. How can I assign values from one object to another without creating reference?
this will assign not by reference
<script>
var obj =
{
name: 'abc',
age: '30'
};
var objTwo = {};
for( var i in obj )
{
objTwo[i] = obj[i];
}
</script>
view fiddle
I would use jQuery to do this:
var obj1 = {
name: "abc",
age: 20
}
console.log(obj1);
var obj2 = $.extend({}, obj1, {});
console.log(obj2);
obj2.age = 1;
console.log(obj2);
console.log(obj1);
If you only need to clone simple objects, simply doing
JSON.parse (JSON.stringify (obj))
would suffice.
But this obviously doesn't work in all cases, since JSON.stringify can't handle circular references and strips out functions.
So if you want to go beyond that, things will get more complicated and you have to either rely on some utility library or need to implement your own deep clone method.
Here is a sample implementation that expects a level of deepness to clone.
(function (Object, Array) {
function cloneObject(deep, scope, clonedScope) {
var type = typeof this,
clone = {},
isCR = -1;
deep = Number(deep) || 0;
scope = scope || [];
clonedScope = clonedScope || [];
if (!Array.isArray(scope) || !Array.isArray(clonedScope) || clonedScope.length !== scope.length) {
throw new TypeError("Unexpected input");
}
//If we find a primitive, we reeturn its value.
if (type !== "object") {
return this.valueOf();
}
scope.push(this);
clonedScope.push(clone);
if (0 === deep) { //If we reached the recursion limit, we can perform a shallow copy
for (var prop in this) {
clone[prop] = this[prop];
}
} else { //Otherwise we need to make some checks first.
for (var prop in this) {
if ((isCR = scope.indexOf(this[prop])) > -1) { //If we find a circular reference, we want create a new circular reference to the cloned version.
clone[prop] = clonedScope[isCR];
} else if (typeof this[prop] !== "undefined" && this[prop] !== null) { //Otherwise continue cloning.
clone[prop] = (typeof this[prop] !== "object" ? this[prop] : this[prop].clone(deep - 1, scope, clonedScope)); //If we find a non object, we can directly assign it. Otherwise we need to recursively call the clone function, counting down the limit, and injecting the scopeArrays, to find circular references.
} else { //If the property is undefined or null, assign it as such.
clone[prop] = this[prop];
}
}
}
scope.pop(); //If we leave a recursion leve, we remove the current object from the list.
clonedScope.pop();
return clone;
}
function cloneArray(deep, scope, clonedScope) {
var clone = [];
deep = Number(deep) || 0;
scope = scope || [];
clonedScope = clonedScope || [];
if (!Array.isArray(scope) || !Array.isArray(clonedScope) || clonedScope.length !== scope.length) {
throw new TypeError("Unexpected input");
}
scope.push(this);
clonedScope.push(this);
if (0 === deep) clone = this.concat();
else this.forEach(function (e) {
if ((isCR = scope.indexOf(e)) > -1) {
clone.push(clonedScope[isCR]);
} else if (typeof e !== "undefined" && e !== null) {
clone.push((typeof e !== "object" ? e : e.clone(deep - 1, scope, clonedScope)));
} else {
clone.push(e);
}
});
scope.pop();
clonedScope.pop();
return clone;
}
Object.defineProperty(Object.prototype, "clone", {
enumerable: false,
value: cloneObject
});
Object.defineProperty(Array.prototype, "clone", {
enumerable: false,
value: cloneArray
});
})(Object, Array);
Note that extending the the built-ins prototypes is often frowned upon, however i decided to do it that way to avoid an additional typecheck and to split the logic for arrays and objects a bit more. This can easily be refactored to a normal function instead
Some tests to check that we indeed have new references.
var first = {
a: {
b: "b",
c: {
}
},
b: "asd",
c: [{}],
d: undefined,
e: null,
f: function a() {} //functions keep their original reference..
};
first.a.c.a = first.a; //Circular object reference
first.c.push(first.c); //Circular array reference
var second = first.clone(Infinity);
console.log(second, second.a === second.a.c.a, first.a !== second.a.c.a); //..., true, true.
There may be a lot of space for improvement, I particularily don't like how the scope and clonedScope get's injected. If anyone has an better idea of finding and reattaching circular references, i'd be glad to update the answer
Here is a Fiddle as well.
var obj, objTwo;
obj = {
name: "abc",
age: 20
}
console.log(obj.age);
objTwo = copy(obj);
objTwo.age = 10;
console.log(obj.age);
function copy (obj) {
var key, rtn = Object.create(Object.getPrototypeOf(obj));
for (key in obj) {
if (obj.hasOwnProperty(key)) {
rtn[key] = obj[key];
}
}
return rtn;
}
In javascript everything is passed by reference. The reason the modification "leaks" to the original function property (variable), is because you are modifying the object's property, not the object (reference) itself. Copy the object to another variable, instead of re-assigning it.
Off-topic:
In javascript everything is passed by reference. apparently is a bit contested; That's why I'm adding this addendum. Feel free to correct me if I'm wrong.
Is JavaScript a pass-by-reference or pass-by-value language? The top answer states it most clearly:
Instead, the situation is that the item passed in is passed by value.
But the item that is passed by value is itself a reference.
So my wording was confusing, but if you also keep in my mind that every operator returns a reference, and keep in mind that every assignment and parameter-passing simply copies those references returned by operators (and value-literals), then passed-by-reference kind of makes sense.
The linked top answer has the full (correct) explanation.
Okay, This might be a strange solution but it is plain javascript. If you want to clone something, I would go with the word, "deep copy", you can use JSON like this:
var obj = {
name: "abc",
age: 20
}
new_object=JSON.parse(JSON.stringify(obj));
Now, you have clone of the object obj.
Another solution is like this:
var new_obj={};
for( new_prop in obj){
if (obj.hasOwnProperty(new_prop)){
new_obj[new_prop]=obj[new_prop]
}
}

Convert a JavaScript string in dot notation into an object reference

Given a JavaScript object,
var obj = { a: { b: '1', c: '2' } }
and a string
"a.b"
how can I convert the string to dot notation so I can go
var val = obj.a.b
If the string was just 'a', I could use obj[a]. But this is more complex. I imagine there is some straightforward method, but it escapes me at present.
recent note: While I'm flattered that this answer has gotten many upvotes, I am also somewhat horrified. If one needs to convert dot-notation strings like "x.a.b.c" into references, it could (maybe) be a sign that there is something very wrong going on (unless maybe you're performing some strange deserialization).
That is to say, novices who find their way to this answer must ask themselves the question "why am I doing this?"
It is of course generally fine to do this if your use case is small and you will not run into performance issues, AND you won't need to build upon your abstraction to make it more complicated later. In fact, if this will reduce code complexity and keep things simple, you should probably go ahead and do what OP is asking for. However, if that's not the case, consider if any of these apply:
case 1: As the primary method of working with your data (e.g. as your app's default form of passing objects around and dereferencing them). Like asking "how can I look up a function or variable name from a string".
This is bad programming practice (unnecessary metaprogramming specifically, and kind of violates function side-effect-free coding style, and will have performance hits). Novices who find themselves in this case, should instead consider working with array representations, e.g. ['x','a','b','c'], or even something more direct/simple/straightforward if possible: like not losing track of the references themselves in the first place (most ideal if it's only client-side or only server-side), etc. (A pre-existing unique id would be inelegant to add, but could be used if the spec otherwise requires its existence regardless.)
case 2: Working with serialized data, or data that will be displayed to the user. Like using a date as a string "1999-12-30" rather than a Date object (which can cause timezone bugs or added serialization complexity if not careful). Or you know what you're doing.
This is maybe fine. Be careful that there are no dot strings "." in your sanitized input fragments.
If you find yourself using this answer all the time and converting back and forth between string and array, you may be in the bad case, and should consider an alternative.
Here's an elegant one-liner that's 10x shorter than the other solutions:
function index(obj,i) {return obj[i]}
'a.b.etc'.split('.').reduce(index, obj)
[edit] Or in ECMAScript 6:
'a.b.etc'.split('.').reduce((o,i)=> o[i], obj)
(Not that I think eval always bad like others suggest it is (though it usually is), nevertheless those people will be pleased that this method doesn't use eval. The above will find obj.a.b.etc given obj and the string "a.b.etc".)
In response to those who still are afraid of using reduce despite it being in the ECMA-262 standard (5th edition), here is a two-line recursive implementation:
function multiIndex(obj,is) { // obj,['1','2','3'] -> ((obj['1'])['2'])['3']
return is.length ? multiIndex(obj[is[0]],is.slice(1)) : obj
}
function pathIndex(obj,is) { // obj,'1.2.3' -> multiIndex(obj,['1','2','3'])
return multiIndex(obj,is.split('.'))
}
pathIndex('a.b.etc')
Depending on the optimizations the JS compiler is doing, you may want to make sure any nested functions are not re-defined on every call via the usual methods (placing them in a closure, object, or global namespace).
edit:
To answer an interesting question in the comments:
how would you turn this into a setter as well? Not only returning the values by path, but also setting them if a new value is sent into the function? – Swader Jun 28 at 21:42
(sidenote: sadly can't return an object with a Setter, as that would violate the calling convention; commenter seems to instead be referring to a general setter-style function with side-effects like index(obj,"a.b.etc", value) doing obj.a.b.etc = value.)
The reduce style is not really suitable to that, but we can modify the recursive implementation:
function index(obj,is, value) {
if (typeof is == 'string')
return index(obj,is.split('.'), value);
else if (is.length==1 && value!==undefined)
return obj[is[0]] = value;
else if (is.length==0)
return obj;
else
return index(obj[is[0]],is.slice(1), value);
}
Demo:
> obj = {a:{b:{etc:5}}}
> index(obj,'a.b.etc')
5
> index(obj,['a','b','etc']) #works with both strings and lists
5
> index(obj,'a.b.etc', 123) #setter-mode - third argument (possibly poor form)
123
> index(obj,'a.b.etc')
123
...though personally I'd recommend making a separate function setIndex(...). I would like to end on a side-note that the original poser of the question could (should?) be working with arrays of indices (which they can get from .split), rather than strings; though there's usually nothing wrong with a convenience function.
A commenter asked:
what about arrays? something like "a.b[4].c.d[1][2][3]" ? –AlexS
Javascript is a very weird language; in general objects can only have strings as their property keys, so for example if x was a generic object like x={}, then x[1] would become x["1"]... you read that right... yup...
Javascript Arrays (which are themselves instances of Object) specifically encourage integer keys, even though you could do something like x=[]; x["puppy"]=5;.
But in general (and there are exceptions), x["somestring"]===x.somestring (when it's allowed; you can't do x.123).
(Keep in mind that whatever JS compiler you're using might choose, maybe, to compile these down to saner representations if it can prove it would not violate the spec.)
So the answer to your question would depend on whether you're assuming those objects only accept integers (due to a restriction in your problem domain), or not. Let's assume not. Then a valid expression is a concatenation of a base identifier plus some .identifiers plus some ["stringindex"]s.
Let us ignore for a moment that we can of course do other things legitimately in the grammar like identifier[0xFA7C25DD].asdf[f(4)?.[5]+k][false][null][undefined][NaN]; integers are not (that) 'special'.
Commenter's statement would then be equivalent to a["b"][4]["c"]["d"][1][2][3], though we should probably also support a.b["c\"validjsstringliteral"][3]. You'd have to check the ecmascript grammar section on string literals to see how to parse a valid string literal. Technically you'd also want to check (unlike in my first answer) that a is a valid javascript identifier.
A simple answer to your question though, if your strings don't contain commas or brackets, would be just be to match length 1+ sequences of characters not in the set , or [ or ]:
> "abc[4].c.def[1][2][\"gh\"]".match(/[^\]\[.]+/g)
// ^^^ ^ ^ ^^^ ^ ^ ^^^^^
["abc", "4", "c", "def", "1", "2", ""gh""]
If your strings don't contain escape characters or " characters, and because IdentifierNames are a sublanguage of StringLiterals (I think???) you could first convert your dots to []:
> var R=[], demoString="abc[4].c.def[1][2][\"gh\"]";
> for(var match,matcher=/^([^\.\[]+)|\.([^\.\[]+)|\["([^"]+)"\]|\[(\d+)\]/g;
match=matcher.exec(demoString); ) {
R.push(Array.from(match).slice(1).filter(x=> x!==undefined)[0]);
// extremely bad code because js regexes are weird, don't use this
}
> R
["abc", "4", "c", "def", "1", "2", "gh"]
Of course, always be careful and never trust your data. Some bad ways to do this that might work for some use cases also include:
// hackish/wrongish; preprocess your string into "a.b.4.c.d.1.2.3", e.g.:
> yourstring.replace(/]/g,"").replace(/\[/g,".").split(".")
"a.b.4.c.d.1.2.3" //use code from before
Special 2018 edit:
Let's go full-circle and do the most inefficient, horribly-overmetaprogrammed solution we can come up with... in the interest of syntactical purityhamfistery. With ES6 Proxy objects!... Let's also define some properties which (imho are fine and wonderful but) may break improperly-written libraries. You should perhaps be wary of using this if you care about performance, sanity (yours or others'), your job, etc.
// [1,2,3][-1]==3 (or just use .slice(-1)[0])
if (![1][-1])
Object.defineProperty(Array.prototype, -1, {get() {return this[this.length-1]}}); //credit to caub
// WARNING: THIS XTREME™ RADICAL METHOD IS VERY INEFFICIENT,
// ESPECIALLY IF INDEXING INTO MULTIPLE OBJECTS,
// because you are constantly creating wrapper objects on-the-fly and,
// even worse, going through Proxy i.e. runtime ~reflection, which prevents
// compiler optimization
// Proxy handler to override obj[*]/obj.* and obj[*]=...
var hyperIndexProxyHandler = {
get: function(obj,key, proxy) {
return key.split('.').reduce((o,i)=> o[i], obj);
},
set: function(obj,key,value, proxy) {
var keys = key.split('.');
var beforeLast = keys.slice(0,-1).reduce((o,i)=> o[i], obj);
beforeLast[keys[-1]] = value;
},
has: function(obj,key) {
//etc
}
};
function hyperIndexOf(target) {
return new Proxy(target, hyperIndexProxyHandler);
}
Demo:
var obj = {a:{b:{c:1, d:2}}};
console.log("obj is:", JSON.stringify(obj));
var objHyper = hyperIndexOf(obj);
console.log("(proxy override get) objHyper['a.b.c'] is:", objHyper['a.b.c']);
objHyper['a.b.c'] = 3;
console.log("(proxy override set) objHyper['a.b.c']=3, now obj is:", JSON.stringify(obj));
console.log("(behind the scenes) objHyper is:", objHyper);
if (!({}).H)
Object.defineProperties(Object.prototype, {
H: {
get: function() {
return hyperIndexOf(this); // TODO:cache as a non-enumerable property for efficiency?
}
}
});
console.log("(shortcut) obj.H['a.b.c']=4");
obj.H['a.b.c'] = 4;
console.log("(shortcut) obj.H['a.b.c'] is obj['a']['b']['c'] is", obj.H['a.b.c']);
Output:
obj is: {"a":{"b":{"c":1,"d":2}}}
(proxy override get) objHyper['a.b.c'] is: 1
(proxy override set) objHyper['a.b.c']=3, now obj is: {"a":{"b":{"c":3,"d":2}}}
(behind the scenes) objHyper is: Proxy {a: {…}}
(shortcut) obj.H['a.b.c']=4
(shortcut) obj.H['a.b.c'] is obj['a']['b']['c'] is: 4
inefficient idea: You can modify the above to dispatch based on the input argument; either use the .match(/[^\]\[.]+/g) method to support obj['keys'].like[3]['this'], or if instanceof Array, then just accept an Array as input like keys = ['a','b','c']; obj.H[keys].
Per suggestion that maybe you want to handle undefined indices in a 'softer' NaN-style manner (e.g. index({a:{b:{c:...}}}, 'a.x.c') return undefined rather than uncaught TypeError)...:
This makes sense from the perspective of "we should return undefined rather than throw an error" in the 1-dimensional index situation ({})['e.g.']==undefined, so "we should return undefined rather than throw an error" in the N-dimensional situation.
This does not make sense from the perspective that we are doing x['a']['x']['c'], which would fail with a TypeError in the above example.
That said, you'd make this work by replacing your reducing function with either:
(o,i)=> o===undefined?undefined:o[i], or
(o,i)=> (o||{})[i].
(You can make this more efficient by using a for loop and breaking/returning whenever the subresult you'd next index into is undefined, or using a try-catch if you expect such failures to be sufficiently rare.)
If you can use Lodash, there is a function, which does exactly that:
_.get(object, path, [defaultValue])
var val = _.get(obj, "a.b");
You could use lodash.get
After installing (npm i lodash.get), use it like this:
const get = require('lodash.get');
const myObj = {
user: {
firstName: 'Stacky',
lastName: 'Overflowy',
list: ['zero', 'one', 'two']
},
id: 123
};
console.log(get(myObj, 'user.firstName')); // outputs Stacky
console.log(get(myObj, 'id')); // outputs 123
console.log(get(myObj, 'user.list[1]')); // outputs one
// You can also update values
get(myObj, 'user').firstName = 'John';
A little more involved example with recursion.
function recompose(obj, string) {
var parts = string.split('.');
var newObj = obj[parts[0]];
if (parts[1]) {
parts.splice(0, 1);
var newString = parts.join('.');
return recompose(newObj, newString);
}
return newObj;
}
var obj = { a: { b: '1', c: '2', d:{a:{b:'blah'}}}};
console.log(recompose(obj, 'a.d.a.b')); //blah
2021
You don't need to pull in another dependency every time you wish for new capabilities in your program. Modern JS is very capable and the optional-chaining operator ?. is now widely supported and makes this kind of task easy as heck.
With a single line of code we can write get that takes an input object, t and string path. It works for object and arrays of any nesting level -
const get = (t, path) =>
path.split(".").reduce((r, k) => r?.[k], t)
const mydata =
{ a: { b: [ 0, { c: { d: [ "hello", "world" ] } } ] } }
console.log(get(mydata, "a.b.1.c.d.0"))
console.log(get(mydata, "a.b.1.c.d.1"))
console.log(get(mydata, "a.b.x.y.z"))
"hello"
"world"
undefined
I suggest to split the path and iterate it and reduce the object you have. This proposal works with a default value for missing properties.
const getValue = (object, keys) => keys.split('.').reduce((o, k) => (o || {})[k], object);
console.log(getValue({ a: { b: '1', c: '2' } }, 'a.b'));
console.log(getValue({ a: { b: '1', c: '2' } }, 'foo.bar.baz'));
Many years since the original post.
Now there is a great library called 'object-path'.
https://github.com/mariocasciaro/object-path
Available on NPM and BOWER
https://www.npmjs.com/package/object-path
It's as easy as:
objectPath.get(obj, "a.c.1"); //returns "f"
objectPath.set(obj, "a.j.0.f", "m");
And works for deeply nested properties and arrays.
If you expect to dereference the same path many times, building a function for each dot notation path actually has the best performance by far (expanding on the perf tests James Wilkins linked to in comments above).
var path = 'a.b.x';
var getter = new Function("obj", "return obj." + path + ";");
getter(obj);
Using the Function constructor has some of the same drawbacks as eval() in terms of security and worst-case performance, but IMO it's a badly underused tool for cases where you need a combination of extreme dynamism and high performance. I use this methodology to build array filter functions and call them inside an AngularJS digest loop. My profiles consistently show the array.filter() step taking less than 1ms to dereference and filter about 2000 complex objects, using dynamically-defined paths 3-4 levels deep.
A similar methodology could be used to create setter functions, of course:
var setter = new Function("obj", "newval", "obj." + path + " = newval;");
setter(obj, "some new val");
Other proposals are a little cryptic, so I thought I'd contribute:
Object.prop = function(obj, prop, val){
var props = prop.split('.')
, final = props.pop(), p
while(p = props.shift()){
if (typeof obj[p] === 'undefined')
return undefined;
obj = obj[p]
}
return val ? (obj[final] = val) : obj[final]
}
var obj = { a: { b: '1', c: '2' } }
// get
console.log(Object.prop(obj, 'a.c')) // -> 2
// set
Object.prop(obj, 'a.c', function(){})
console.log(obj) // -> { a: { b: '1', c: [Function] } }
var a = { b: { c: 9 } };
function value(layer, path, value) {
var i = 0,
path = path.split('.');
for (; i < path.length; i++)
if (value != null && i + 1 === path.length)
layer[path[i]] = value;
layer = layer[path[i]];
return layer;
};
value(a, 'b.c'); // 9
value(a, 'b.c', 4);
value(a, 'b.c'); // 4
This is a lot of code when compared to the much simpler eval way of doing it, but like Simon Willison says, you should never use eval.
Also, JSFiddle.
You can use the library available at npm, which simplifies this process. https://www.npmjs.com/package/dot-object
var dot = require('dot-object');
var obj = {
some: {
nested: {
value: 'Hi there!'
}
}
};
var val = dot.pick('some.nested.value', obj);
console.log(val);
// Result: Hi there!
Note if you're already using Lodash you can use the property or get functions:
var obj = { a: { b: '1', c: '2' } };
_.property('a.b')(obj); // => 1
_.get(obj, 'a.b'); // => 1
Underscore.js also has a property function, but it doesn't support dot notation.
I have extended the elegant answer by ninjagecko so that the function handles both dotted and/or array style references, and so that an empty string causes the parent object to be returned.
Here you go:
string_to_ref = function (object, reference) {
function arr_deref(o, ref, i) { return !ref ? o : (o[ref.slice(0, i ? -1 : ref.length)]) }
function dot_deref(o, ref) { return ref.split('[').reduce(arr_deref, o); }
return !reference ? object : reference.split('.').reduce(dot_deref, object);
};
See my working jsFiddle example here: http://jsfiddle.net/sc0ttyd/q7zyd/
You can obtain value of an object member by dot notation with a single line of code:
new Function('_', 'return _.' + path)(obj);
In you case:
var obj = { a: { b: '1', c: '2' } }
var val = new Function('_', 'return _.a.b')(obj);
To make it simple you may write a function like this:
function objGet(obj, path){
return new Function('_', 'return _.' + path)(obj);
}
Explanation:
The Function constructor creates a new Function object. In JavaScript every function is actually a Function object. Syntax to create a function explicitly with Function constructor is:
new Function ([arg1[, arg2[, ...argN]],] functionBody)
where arguments(arg1 to argN) must be a string that corresponds to a valid javaScript identifier and functionBody is a string containing the javaScript statements comprising the function definition.
In our case we take the advantage of string function body to retrieve object member with dot notation.
Hope it helps.
var find = function(root, path) {
var segments = path.split('.'),
cursor = root,
target;
for (var i = 0; i < segments.length; ++i) {
target = cursor[segments[i]];
if (typeof target == "undefined") return void 0;
cursor = target;
}
return cursor;
};
var obj = { a: { b: '1', c: '2' } }
find(obj, "a.b"); // 1
var set = function (root, path, value) {
var segments = path.split('.'),
cursor = root,
target;
for (var i = 0; i < segments.length - 1; ++i) {
cursor = cursor[segments[i]] || { };
}
cursor[segments[segments.length - 1]] = value;
};
set(obj, "a.k", function () { console.log("hello world"); });
find(obj, "a.k")(); // hello world
Use this function:
function dotToObject(data) {
function index(parent, key, value) {
const [mainKey, ...children] = key.split(".");
parent[mainKey] = parent[mainKey] || {};
if (children.length === 1) {
parent[mainKey][children[0]] = value;
} else {
index(parent[mainKey], children.join("."), value);
}
}
const result = Object.entries(data).reduce((acc, [key, value]) => {
if (key.includes(".")) {
index(acc, key, value);
} else {
acc[key] = value;
}
return acc;
}, {});
return result;
}
module.exports = { dotToObject };
Ex:
const user = {
id: 1,
name: 'My name',
'address.zipCode': '123',
'address.name': 'Some name',
'address.something.id': 1,
}
const mappedUser = dotToObject(user)
console.log(JSON.stringify(mappedUser, null, 2))
Output:
{
"id": 1,
"name": "My name",
"address": {
"zipCode": "123",
"name": "Some name",
"something": {
"id": 1
}
}
}
using Array Reduce function will get/set based on path provided.
I tested it with a.b.c and a.b.2.c {a:{b:[0,1,{c:7}]}} and its works for both getting key or mutating object to set value
function setOrGet(obj, path=[], newValue){
const l = typeof path === 'string' ? path.split('.') : path;
return l.reduce((carry,item, idx)=>{
const leaf = carry[item];
// is this last item in path ? cool lets set/get value
if( l.length-idx===1) {
// mutate object if newValue is set;
carry[item] = newValue===undefined ? leaf : newValue;
// return value if its a get/object if it was a set
return newValue===undefined ? leaf : obj ;
}
carry[item] = leaf || {}; // mutate if key not an object;
return carry[item]; // return object ref: to continue reduction;
}, obj)
}
console.log(
setOrGet({a: {b:1}},'a.b') === 1 ||
'Test Case: Direct read failed'
)
console.log(
setOrGet({a: {b:1}},'a.c',22).a.c===22 ||
'Test Case: Direct set failed'
)
console.log(
setOrGet({a: {b:[1,2]}},'a.b.1',22).a.b[1]===22 ||
'Test Case: Direct set on array failed'
)
console.log(
setOrGet({a: {b:{c: {e:1} }}},'a.b.c.e',22).a.b.c. e===22 ||
'Test Case: deep get failed'
)
// failed !. Thats your homework :)
console.log(
setOrGet({a: {b:{c: {e:[1,2,3,4,5]} }}},'a.b.c.e.3 ',22)
)
my personal recommendation.
do not use such a thing unless there is no other way!
i saw many examples people use it for translations for example from json; so you see function like locale('app.homepage.welcome') . this is just bad. if you already have data in an object/json; and you know path.. then just use it directly example locale().app.homepage.welcome by changing you function to return object you get typesafe, with autocomplete, less prone to typo's ..
I copied the following from Ricardo Tomasi's answer and modified to also create sub-objects that don't yet exist as necessary. It's a little less efficient (more ifs and creating of empty objects), but should be pretty good.
Also, it'll allow us to do Object.prop(obj, 'a.b', false) where we couldn't before. Unfortunately, it still won't let us assign undefined...Not sure how to go about that one yet.
/**
* Object.prop()
*
* Allows dot-notation access to object properties for both getting and setting.
*
* #param {Object} obj The object we're getting from or setting
* #param {string} prop The dot-notated string defining the property location
* #param {mixed} val For setting only; the value to set
*/
Object.prop = function(obj, prop, val){
var props = prop.split('.'),
final = props.pop(),
p;
for (var i = 0; i < props.length; i++) {
p = props[i];
if (typeof obj[p] === 'undefined') {
// If we're setting
if (typeof val !== 'undefined') {
// If we're not at the end of the props, keep adding new empty objects
if (i != props.length)
obj[p] = {};
}
else
return undefined;
}
obj = obj[p]
}
return typeof val !== "undefined" ? (obj[final] = val) : obj[final]
}
Few years later, I found this that handles scope and array. e.g. a['b']["c"].d.etc
function getScopedObj(scope, str) {
let obj=scope, arr;
try {
arr = str.split(/[\[\]\.]/) // split by [,],.
.filter(el => el) // filter out empty one
.map(el => el.replace(/^['"]+|['"]+$/g, '')); // remove string quotation
arr.forEach(el => obj = obj[el])
} catch(e) {
obj = undefined;
}
return obj;
}
window.a = {b: {c: {d: {etc: 'success'}}}}
getScopedObj(window, `a.b.c.d.etc`) // success
getScopedObj(window, `a['b']["c"].d.etc`) // success
getScopedObj(window, `a['INVALID']["c"].d.etc`) // undefined
If you wish to convert any object that contains dot notation keys into an arrayed version of those keys you can use this.
This will convert something like
{
name: 'Andy',
brothers.0: 'Bob'
brothers.1: 'Steve'
brothers.2: 'Jack'
sisters.0: 'Sally'
}
to
{
name: 'Andy',
brothers: ['Bob', 'Steve', 'Jack']
sisters: ['Sally']
}
convertDotNotationToArray(objectWithDotNotation) {
Object.entries(objectWithDotNotation).forEach(([key, val]) => {
// Is the key of dot notation
if (key.includes('.')) {
const [name, index] = key.split('.');
// If you have not created an array version, create one
if (!objectWithDotNotation[name]) {
objectWithDotNotation[name] = new Array();
}
// Save the value in the newly created array at the specific index
objectWithDotNotation[name][index] = val;
// Delete the current dot notation key val
delete objectWithDotNotation[key];
}
});
}
If you want to convert a string dot notation into an object, I've made a handy little helper than can turn a string like a.b.c.d with a value of e with dotPathToObject("a.b.c.d", "value") returning this:
{
"a": {
"b": {
"c": {
"d": "value"
}
}
}
}
https://gist.github.com/ahallora/9731d73efb15bd3d3db647efa3389c12
Solution:
function deepFind(key, data){
return key.split('.').reduce((ob,i)=> ob?.[i], data)
}
Usage:
const obj = {
company: "Pet Shop",
person: {
name: "John"
},
animal: {
name: "Lucky"
}
}
const company = deepFind("company", obj)
const personName = deepFind("person.name", obj)
const animalName = deepFind("animal.name", obj)
Here is my implementation
Implementation 1
Object.prototype.access = function() {
var ele = this[arguments[0]];
if(arguments.length === 1) return ele;
return ele.access.apply(ele, [].slice.call(arguments, 1));
}
Implementation 2 (using array reduce instead of slice)
Object.prototype.access = function() {
var self = this;
return [].reduce.call(arguments,function(prev,cur) {
return prev[cur];
}, self);
}
Examples:
var myobj = {'a':{'b':{'c':{'d':'abcd','e':[11,22,33]}}}};
myobj.access('a','b','c'); // returns: {'d':'abcd', e:[0,1,2,3]}
myobj.a.b.access('c','d'); // returns: 'abcd'
myobj.access('a','b','c','e',0); // returns: 11
it can also handle objects inside arrays as for
var myobj2 = {'a': {'b':[{'c':'ab0c'},{'d':'ab1d'}]}}
myobj2.access('a','b','1','d'); // returns: 'ab1d'
I used this code in my project
const getValue = (obj, arrPath) => (
arrPath.reduce((x, y) => {
if (y in x) return x[y]
return {}
}, obj)
)
Usage:
const obj = { id: { user: { local: 104 } } }
const path = [ 'id', 'user', 'local' ]
getValue(obj, path) // return 104
Using object-scan seems a bit overkill, but you can simply do
// const objectScan = require('object-scan');
const get = (obj, p) => objectScan([p], { abort: true, rtn: 'value' })(obj);
const obj = { a: { b: '1', c: '2' } };
console.log(get(obj, 'a.b'));
// => 1
console.log(get(obj, '*.c'));
// => 2
.as-console-wrapper {max-height: 100% !important; top: 0}
<script src="https://bundle.run/object-scan#13.7.1"></script>
Disclaimer: I'm the author of object-scan
There are a lot more advanced examples in the readme.
This is one of those cases, where you ask 10 developers and you get 10 answers.
Below is my [simplified] solution for OP, using dynamic programming.
The idea is that you would pass an existing DTO object that you wish to UPDATE. This makes the method most useful in the case where you have a form with several input elements having name attributes set with dot (fluent) syntax.
Example use:
<input type="text" name="person.contact.firstName" />
Code snippet:
const setFluently = (obj, path, value) => {
if (typeof path === "string") {
return setFluently(obj, path.split("."), value);
}
if (path.length <= 1) {
obj[path[0]] = value;
return obj;
}
const key = path[0];
obj[key] = setFluently(obj[key] ? obj[key] : {}, path.slice(1), value);
return obj;
};
const origObj = {
a: {
b: "1",
c: "2"
}
};
setFluently(origObj, "a.b", "3");
setFluently(origObj, "a.c", "4");
console.log(JSON.stringify(origObj, null, 3));
function at(obj, path, val = undefined) {
// If path is an Array,
if (Array.isArray(path)) {
// it returns the mapped array for each result of the path
return path.map((path) => at(obj, path, val));
}
// Uniting several RegExps into one
const rx = new RegExp(
[
/(?:^(?:\.\s*)?([_a-zA-Z][_a-zA-Z0-9]*))/,
/(?:^\[\s*(\d+)\s*\])/,
/(?:^\[\s*'([^']*(?:\\'[^']*)*)'\s*\])/,
/(?:^\[\s*"([^"]*(?:\\"[^"]*)*)"\s*\])/,
/(?:^\[\s*`([^`]*(?:\\`[^`]*)*)`\s*\])/,
]
.map((r) => r.source)
.join("|")
);
let rm;
while (rm = rx.exec(path.trim())) {
// Matched resource
let [rf, rp] = rm.filter(Boolean);
// If no one matches found,
if (!rm[1] && !rm[2]) {
// it will replace escape-chars
rp = rp.replace(/\\(.)/g, "$1");
}
// If the new value is set,
if ("undefined" != typeof val && path.length == rf.length) {
// assign a value to the object property and return it
return (obj[rp] = val);
}
// Going one step deeper
obj = obj[rp];
// Removing a step from the path
path = path.substr(rf.length).trim();
}
if (path) {
throw new SyntaxError();
}
return obj;
}
// Test object schema
let o = { a: { b: [ [ { c: { d: { '"e"': { f: { g: "xxx" } } } } } ] ] } };
// Print source object
console.log(JSON.stringify(o));
// Set value
console.log(at(o, '.a["b"][0][0].c[`d`]["\\"e\\""][\'f\']["g"]', "zzz"));
// Get value
console.log(at(o, '.a["b"][0][0].c[`d`]["\\"e\\""][\'f\']["g"]'));
// Print result object
console.log(JSON.stringify(o));
Here is my code without using eval. It’s easy to understand too.
function value(obj, props) {
if (!props)
return obj;
var propsArr = props.split('.');
var prop = propsArr.splice(0, 1);
return value(obj[prop], propsArr.join('.'));
}
var obj = { a: { b: '1', c: '2', d:{a:{b:'blah'}}}};
console.log(value(obj, 'a.d.a.b')); // Returns blah
Yes, extending base prototypes is not usually good idea but, if you keep all extensions in one place, they might be useful.
So, here is my way to do this.
Object.defineProperty(Object.prototype, "getNestedProperty", {
value : function (propertyName) {
var result = this;
var arr = propertyName.split(".");
while (arr.length && result) {
result = result[arr.shift()];
}
return result;
},
enumerable: false
});
Now you will be able to get nested property everywhere without importing module with function or copy/pasting function.
Example:
{a:{b:11}}.getNestedProperty('a.b'); // Returns 11
The Next.js extension broke Mongoose in my project. Also I've read that it might break jQuery. So, never do it in the Next.js way:
Object.prototype.getNestedProperty = function (propertyName) {
var result = this;
var arr = propertyName.split(".");
while (arr.length && result) {
result = result[arr.shift()];
}
return result;
};
This is my extended solution proposed by ninjagecko.
For me, simple string notation was not enough, so the below version supports things like:
index(obj, 'data.accounts[0].address[0].postcode');
 
/**
* Get object by index
* #supported
* - arrays supported
* - array indexes supported
* #not-supported
* - multiple arrays
* #issues:
* index(myAccount, 'accounts[0].address[0].id') - works fine
* index(myAccount, 'accounts[].address[0].id') - doesnt work
* #Example:
* index(obj, 'data.accounts[].id') => returns array of id's
* index(obj, 'data.accounts[0].id') => returns id of 0 element from array
* index(obj, 'data.accounts[0].addresses.list[0].id') => error
* #param obj
* #param path
* #returns {any}
*/
var index = function(obj, path, isArray?, arrIndex?){
// is an array
if(typeof isArray === 'undefined') isArray = false;
// array index,
// if null, will take all indexes
if(typeof arrIndex === 'undefined') arrIndex = null;
var _arrIndex = null;
var reduceArrayTag = function(i, subArrIndex){
return i.replace(/(\[)([\d]{0,})(\])/, (i) => {
var tmp = i.match(/(\[)([\d]{0,})(\])/);
isArray = true;
if(subArrIndex){
_arrIndex = (tmp[2] !== '') ? tmp[2] : null;
}else{
arrIndex = (tmp[2] !== '') ? tmp[2] : null;
}
return '';
});
}
function byIndex(obj, i) {
// if is an array
if(isArray){
isArray = false;
i = reduceArrayTag(i, true);
// if array index is null,
// return an array of with values from every index
if(!arrIndex){
var arrValues = [];
_.forEach(obj, (el) => {
arrValues.push(index(el, i, isArray, arrIndex));
})
return arrValues;
}
// if array index is specified
var value = obj[arrIndex][i];
if(isArray){
arrIndex = _arrIndex;
}else{
arrIndex = null;
}
return value;
}else{
// remove [] from notation,
// if [] has been removed, check the index of array
i = reduceArrayTag(i, false);
return obj[i]
}
}
// reduce with the byIndex method
return path.split('.').reduce(byIndex, obj)
}

Categories

Resources