I'm using Parcel.js. When I'm trying to run Parcel and build my project via yarn parcel ./src/index.html
the EPERM error happens regarding parcel cache.
The error
Error: EPERM: operation not permitted, rename
'E:webproject-landing.parcel-cache65ca36a4b4620013e0950eda4009b3b2.blob.22060.1.6'
-> 'E:webproject-landing.parcel-cache65ca36a4b4620013e0950eda4009b3b2.blob'
OS: Windows 10
Execution ENV: Bash terminal/VSCode terminal
Could someone, please, give to me some advice?
Thanks for any help.
P.S. Also, I don't understand why the Path of the project, etc. is so strange, without any separators. Is this the Parcel specific?
I just solved it, I uninstall parcel, npm uninstall pacel, then installed it again, npm install parcel-bundler --save-dev
Answer
Ctrl-C or cancel the server you might have running and restart the dev. server and see if it fixes itself. It did for me.
Not sure if this is still an issue or if anyone else finds themselves here, but Parcel 2 is currently being developed and known bugs are at the github repo and there's a docs/blog for the project both linked below! It has been helping me a bunch!
https://v2.parceljs.org/
https://github.com/parcel-bundler/parcel
npm cache clean --force
npm install -g npm#latest --force
This works for me!
Anything I try to do with NPM, I end up with npm ERR! Cannot find module './access-error.js'. Help!
I first noticed it when trying to install vue-chartjs. I ran npm install vue-chartjs chart.js --save like the docs said to do and got the error:
code/premium-poker-tools [master●] » npm install vue-chartjs chart.js --save
npm ERR! code MODULE_NOT_FOUND
npm ERR! Cannot find module './access-error.js'
npm ERR! A complete log of this run can be found in:
npm ERR! /Users/adamzerner/.npm/_logs/2019-03-12T23_56_46_114Z-debug.log
Then I tried installing chart.js and vue-chartjs individually, but it gives me the same error.
Then I googled the issue. I tried:
rm -rf node_modules
npm install
and it didn't work.
I tried reinstalling NPM and it didn't work. I tried removing NPM via sudo npm uninstall npm -g and then planning on reinstalling it after, and it didn't work. Everything I do gives me the npm ERR! Cannot find module './access-error.js' error.
This problem sounds very similar to one I had a few weeks ago.
What worked for me was removing Node.js from my Mac and reinstalling it, because installing Node.js installs npm as well.
Command used to remove Node.js: sudo rm -rf /usr/local/{bin/{node,npm},lib/node_modules/npm,lib/node,share/man/*/node.*}
Then just reinstall Node.js and everything should work again!
Hope this helps!
Ran into the same issue. Was using Node v8.11.4. Switched to Node v8.9.4 and it started working again...
Using NVM, I did the following:
nvm ls
nvm install <different version>
nvm alias default <different version>
Best guess is that it wasn't 8.11 specifically, but something with my particular installation was messed up and using a fresh install fixed it.
Not very satisfying. ¯\_(ツ)_/¯
I faced the same problem. Found that the node version is different.
Try the following:
1. nvm ls
2. nvm use <latest version available>
Now baam .. it works.
I literally just made a fresh installation of the Angular CLI in order to try it out and I don't have a clue on what's causing the following error on the command line:
PC:cobros Fran$ ng serve
** NG Live Development Server is listening on localhost:4200, open your browser on http://localhost:4200/ **
95% emitting/Users/Fran/Documents/Workspace/Repos/cobros/node_modules/enhanced-resolve/lib/CachedInputFileSystem.js:40
callbacks[i](err, result);
^
TypeError: callbacks[i] is not a function
at Storage.finished (/Users/Fran/Documents/Workspace/Repos/cobros/node_modules/enhanced-resolve/lib/CachedInputFileSystem.js:40:15)
at /Users/Fran/Documents/Workspace/Repos/cobros/node_modules/enhanced-resolve/lib/CachedInputFileSystem.js:77:9
at /Users/Fran/Documents/Workspace/Repos/cobros/node_modules/graceful-fs/polyfills.js:287:18
at FSReqWrap.oncomplete (fs.js:153:5)
This is the information I get returned when I try "ng -v" (In case it's useful at all):
Angular CLI: 1.6.8
Node: 8.9.0
OS: darwin x64
Angular: 5.2.4
... animations, common, compiler, compiler-cli, core, forms
... http, language-service, platform-browser
... platform-browser-dynamic, router
#angular/cli: 1.6.8
#angular-devkit/build-optimizer: 0.0.42
#angular-devkit/core: 0.0.29
#angular-devkit/schematics: 0.0.52
#ngtools/json-schema: 1.1.0
#ngtools/webpack: 1.9.8
#schematics/angular: 0.1.17
typescript: 2.5.3
webpack: 3.10.0
What does the 'enhanced-resolve' module even do?
Did I install angular wrong? I followed the instructions from https://github.com/angular/angular-cli and made sure I fulfilled the prerequisites.
EDIT: The issue is now fixed, so there is no need to use this workaround anymore.
Solution (workaround) found here
Add "copy-webpack-plugin": "4.3.0" to your package.json
Thanks #neshkatrapati
I had same problem and this command did miracle for me
npm install copy-webpack-plugin#4.3.1
This issue should now be resolved with v4.4.1 released just now.
https://github.com/webpack-contrib/copy-webpack-plugin/releases/tag/v4.4.1
EDIT: The issue is now fixed, so there is no need to use this workaround anymore.
Happens after upgrading #angular/cli to 1.6.8.
Solution: Problem is with copy-webpack-plugin (https://github.com/webpack-contrib/copy-webpack-plugin/issues/217)
npm i copy-webpack-plugin#4.3.1 --save-dev helps
NOTE: Previous offered solution was to downgrade cli to 1.6.7, which does not help.
As stated here https://github.com/angular/angular-cli/issues/9550 it's a problem with copy-webpack-plugin.
It can be solved by doing npm install copy-webpack-plugin#4.3.0
Following github.com/angular/angular-cli/issues/9550 (thanks #oers for the link in the comments)
I just downgraded Anuglar CLI to version 1.6.7.
To do so, just type
npm uninstall -g #angular/cli
And once it finished install a previous version
npm install -g #angular/cli#1.6.7
NOTE: This will work but it is just a temporary solution, they probably -and hopefully- hot fix this.
EDIT: Actually I tried the wrong project which wasn't using CLI, tried again and it doesn't work, if you follow the github thread, it looks like a big thing, as it doesn't work with CLI 1.5.x nor 1.6.x (didn't tried with the others). It looks like the only thing we can do ATM is either debug through or sit and wait.
OOPS!
if npm install copy-webpack-plugin#4.3.1 doesn`t help try add in package.json:
"optionalDependencies": {
"copy-webpack-plugin": "4.3.1"
},
"resolutions": {
"copy-webpack-plugin": "4.3.1"
}
Edit
Just execute yarn upgrade.
There was a release of copy_webpack_plugin fixing the bug (4.4.1), so this should be preferred for resolving this issue. With npm, npm --depth 9999 update should do the trick to update all dependencies recursively.
Regarding the depth argument for npm update:
As of npm#2.6.1, the npm update will only inspect top-level packages. Prior versions of npm would also recursively inspect all dependencies. To get the old behavior, use npm --depth 9999 update
Original answer below:
Solution
rm -rf node_modules package-lock.json
npm i copy-webpack-plugin#4.3.1 -E -O
npm i
Explanation:
We remove node_modules and lockfile
We specify copy_webpack_plugin only as a peer dependency (option -O) and with an exact version (option -E)
We install node_modules
Try this command -> npm install copy-webpack-plugin#4.3.0 resolved my issue
run this command npm install copy-webpack-plugin#4.3.0
callbacks[i](err, result);
^
TypeError: callbacks[i] is not a function
solution:-
npm install copy-webpack-plugin#4.3.0
Try to uninstall and reinstall Angular CLI :
Global package:
npm uninstall -g #angular/cli
npm cache clean
if npm version is > 5 then usenpm cache verifyto avoid errors (or to avoid using --force)
npm install -g #angular/cli#latest
Local project package:
rm -rf node_modules dist # use rmdir /S/Q node_modules dist in Windows Command Prompt; use rm -r -fo node_modules,dist in Windows PowerShell
npm install --save-dev #angular/cli#latest
npm install
I'm trying to run npm install, this is output from console:
npm ERR! Linux 4.8.0-27-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! node v6.9.1
npm ERR! npm v3.10.8
npm ERR! Maximum call stack size exceeded
npm ERR!
npm ERR! If you need help, you may report this error at:
npm ERR! <https://github.com/npm/npm/issues>
and this is content of npm-debug.log:
113791 verbose stack RangeError: Maximum call stack size exceeded
113791 verbose stack at Object.color (/usr/lib/node_modules/npm/node_modules/npmlog/node_modules/console-control-strings/index.js:115:32)
113791 verbose stack at EventEmitter.log._format (/usr/lib/node_modules/npm/node_modules/npmlog/log.js:252:51)
113791 verbose stack at EventEmitter.<anonymous> (/usr/lib/node_modules/npm/node_modules/npmlog/log.js:138:24)
113791 verbose stack at emitThree (events.js:116:13)
113791 verbose stack at emit (events.js:194:7)
113791 verbose stack at .<anonymous> (/usr/lib/node_modules/npm/node_modules/npmlog/node_modules/are-we-there-yet/tracker-group.js:23:18)
113791 verbose stack at emitThree (events.js:116:13)
113791 verbose stack at emit (events.js:194:7)
113791 verbose stack at .<anonymous> (/usr/lib/node_modules/npm/node_modules/npmlog/node_modules/are-we-there-yet/tracker-group.js:23:18)
113791 verbose stack at emitThree (events.js:116:13)
113791 verbose stack at emit (events.js:194:7)
113792 verbose cwd /home/giorgi/AdMove/dev/web-advertiser-admove
113793 error Linux 4.8.0-27-generic
113794 error argv "/usr/bin/nodejs" "/usr/bin/npm" "install"
113795 error node v6.9.1
113796 error npm v3.10.8
113797 error Maximum call stack size exceeded
113798 error If you need help, you may report this error at:
113798 error <https://github.com/npm/npm/issues>
113799 verbose exit [ 1, true ]
Removed node_modules several times and tried to reinstall. Can't understand what's the reason that causes this and how to fix it.
metzelder's answer helped me fix the issue. however if you run the command npm cache clean, it will give you a message
As of npm#5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid
So, as of npm5 you can do by adding a --force flag to the command.
So the command is:
npm cache clean --force
npm rebuild
it has solved my problem
Try removing package-lock.json and the node_modules folder:
rm package-lock.json
rm -r node_modules
I had the same issue with npm install.
After a lot of search, I found out that removing your .npmrc file or its content (found at %USERPROFILE%/.npmrc), will solve this issue. This worked for me.
npm uninstall
npm cache clean --force
I tried these two methods but they didn't work. After, I deleted the node_modules directory and ran npm install again, it still didn't work. Lastly, I deleted package-lock.json and created a new package-lock.json file using
npm install
I have overcome this issue by doing following:
Delete all the content of the npm dependencies. You can find the default install location according to this thread:
https://stackoverflow.com/a/5926706/1850297
Before you run npm install command, I suggest to run npm cache clean --force
npm rebuild will work for sure
In my case, update to the newest version:
npm install -g npm
I deleted
node_modules
and then reinstalled by
npm install
It worked for me
I have also faced the same problem and this is how i resolved it.
First of all you need to make sure that your node and npm versions are up to date. if not please upgrade your node and npm packages to latest versions.
nvm install 12.18.3 // update node version through node version manager
npm install npm // update your npm version to latest
Delete your node_modules folder and package-lock.json file.
Force clean the entire NPM cache by using following comand.
npm cache clean --force
Re-Install all the dependencies.
npm install
If above step didn't resolve your problem, try to re-install your dependencies after executing following command.
npm rebuild
This issue can also happen if you're trying to install a package that doesn't exist or if you're trying to install a version that doesn't exist.
npm cache clean returns below message
As of npm#5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid. If you want to make sure everything is consistent, use 'npm cache verify' instead. On the other hand, if you're debugging an issue with the installer, you can use npm install --cache /tmp/empty-cache to use a temporary cache instead of nuking the actual one.
If you run npm cache verify, as specified above, then it actually runs cache verification and garbage collection which fixes the problem.
Cache verified and compressed (~\AppData\Roaming\npm-cache_cacache):
Content verified: 6183 (447214684 bytes) Content garbage-collected: 16
(653745 bytes) Index entries: 9633
Happened in docker (node:15-buster) for me.
Remember to use WORKDIR /<folder> so that it doesn't conflict with original npm libraries installed.
The folder can be anything but system folders, so that includes using /.
In case none of these answer work for you, it may be because the terminal you're using isn't the right one/ your node_modules is used by another part of your computer.
In my case I kept juggling between this error (maximum call stack size exceeded) and the access error event when I did a sudo npm i.
The fix was to close my IDE (which was WebStorm), run npm i in a basic terminal, and that was it.
I'm not a Windows user, so if you are, try to check Rene Knop comment.
For Unix/OSX users, I've removed the root .npmrc file ~/.npmrc.
Before you're going to try it, please,
check if there is nothing necessary over there
you can use this command to bring all content into your terminal: cat ~/.npmrc .
If you have got something like:
cat: /Users/$USER/.npmrc: No such file or directory
to save a copy:
cp ~/.npmrc ~/.npmrc_copy
Now, try to remove it (Works for bash users: Unix / Ubuntu / OSX ...):
rm -f ~/.npmrc
This worked for me.
Hope this will be helpful for others.
I also had the same problem. I had tried the previous solutions, but the solution for me was much simpler. I only had to remove the space in the directory and then run npm i again
Thanks to: https://github.com/nodejs/node-gyp/issues/809#issuecomment-155019383 for pointing this out.
In my case I had a custom .npmrc file that included an auth token for authenticating with a private npm registry.
The token had expired, which helpfully returned code E401: Incorrect or missing password locally, but ERR! Maximum call stack size exceeded from the CI build.
You uninstall npm package and force clean the cache and close terminal and reinstall whichever package be.
$sudo npm uninstall <package - name>
$sudo npm cache clean --force
Then restart terminal and check
Still not working upgrade both npm and node to the latest version
Today we encountered this error when running an npm prune even after running an npm cache clean --force.
Versions:
node 13.8.0
npm 6.13.6
Deleting the package-lock.json worked for this case as well. Thank you all!
In general, once a module has been installed, it's much more convenient to use npm ci instead of npm install. Please check out this SO answer for the advantages of the former with respect to the later in a production environment.
So please just run
npm ci
All dependencies will be updated, and the problem will disappear. Or it will error in the case there's some grave de-synchronization between one and the other.
Most of the times, this issue occurs if you are using the system provided by the organization you work for and it's vpn restricts the use of this command.
In this case, you may try to disconnect from organization vpn and then execute this command.
I tried everything to fix this issue on my Mac. I think the issue started when I had already downloaded npm from Node.js and then reinstalled it with Homebrew while following along with a Team Treehouse video.
Here's what I tried:
From https://docs.npmjs.com/misc/removing-npm
sudo npm uninstall npm -g
sudo make uninstall
sudo rm -rf /usr/local/{lib/node{,/.npm,_modules},bin,share/man}/npm*
From How do I completely uninstall Node.js, and reinstall from beginning (Mac OS X)
sudo rm -rf /usr/local/{lib/node{,/.npm,_modules},bin,share/man}/{npm*,node*,man1/node*}
Here's what worked:
In the end, the only thing that worked for me was to clone down the npm-reinstall repo from GitHub that completely removed everything related to npm on my Mac.
https://github.com/brock/node-reinstall
I then had to reinstall node and npm from Node.js.
I tried everything to fix this issue on my windows 7 machine like
Reinstalling and rebuilding npm
At last, I fixed this small configuration setting issue by wasting my entire day.
How I resolved this issue
Removing my project specific configurations in global .npmrc
at location like drive:/Windows/Users/../.npmrc
I solved it 100% I had this problem with gulp version: 3.5.6.
You should clean the package-lock.js and then run npm install and It worked form
Our company dev environment uses Artifactory as the default registry for our NPM dependencies, and when running npm install it was defaulting to this, which did not work... so manually specifying the main npm registry via npm install --registry https://registry.npmjs.org fixed this issue for me...
I was facing the same error, I was trying to install jest into to one of the packages in a monorepo project.
If you are using Yarn + Learna to package a monorepo project, you will have to navigate to the package.json inside the target package and then run npm install or npm install <package name>.
I don't know why, but I ran npm install with sudo and it worked.
sudo npm install
I had this problem and it was due to an upgrade of my git executable. I rolled back to Git-2.21.0.rc1.windows.1-64-bit and added this to my environment path and it fixed my issue.
The one thing that finally worked for me on Mac was upgrading from node 8.12 to 10.x using NVM.
I uninstalled all other versions of Node with NVM, then installed 10.x, then ran nvm alias default node, which tells NVM to always default to the latest available node version on a shell.
After that, my live reloading issue went away!
Switching to yarn solved the issue for me.
I have an issue trying installing a new project for React-Native. It hangs with this:
react-native#0.33.0` requires a peer of react#~15.3.1 but none was installed.
npm verb exit [ 0, true ]
npm info ok
And It stay like that forever.
npm 3.10.7
node 6.2.1
I also ran into this issue and can confirm that the problem is watchman. I had used homebrew to uninstall/reinstall and was still running into the same issues. My steps to solve were the following:
Uninstall watchman with homebrew
Delete the contents of the /usr/local/var/run/watchman/ folder
Re-install watchman with homebrew
I was able to figure out the extra step of deleting the contents of the watchman folder from these two github issues:
- https://github.com/facebook/watchman/issues/361
- https://github.com/facebook/watchman/issues/358#issuecomment-246672605
After few days going around, the problem was Watchman, Uninstalled and re-installed again did the work.
Try the following steps:
Remove the current watcher: watchman watch-del-all
Delete your node_modules folder
Run npm cache clean -f
Run npm install
Check if your react native project can run with your simulator now:
react-native run-ios