Related
How do I create GUIDs (globally-unique identifiers) in JavaScript? The GUID / UUID should be at least 32 characters and should stay in the ASCII range to avoid trouble when passing them around.
I'm not sure what routines are available on all browsers, how "random" and seeded the built-in random number generator is, etc.
[Edited 2021-10-16 to reflect latest best-practices for producing RFC4122-compliant UUIDs]
Most readers here will want to use the uuid module. It is well-tested and supported.
The crypto.randomUUID() function is an emerging standard that is supported in Node.js and an increasing number of browsers. However because new browser APIs are restricted to secure contexts this method is only available to pages served locally (localhost or 127.0.0.1) or over HTTPS. If you're interested in seeing this restriction lifted for crypto.randomUUID() you can follow this GitHub issue.
If neither of those work for you, there is this method (based on the original answer to this question):
function uuidv4() {
return ([1e7]+-1e3+-4e3+-8e3+-1e11).replace(/[018]/g, c =>
(c ^ crypto.getRandomValues(new Uint8Array(1))[0] & 15 >> c / 4).toString(16)
);
}
console.log(uuidv4());
Note: The use of any UUID generator that relies on Math.random() is strongly discouraged (including snippets featured in previous versions of this answer) for reasons best explained here. TL;DR: solutions based on Math.random() do not provide good uniqueness guarantees.
UUIDs (Universally Unique IDentifier), also known as GUIDs (Globally Unique IDentifier), according to RFC 4122, are identifiers designed to provide certain uniqueness guarantees.
While it is possible to implement RFC-compliant UUIDs in a few lines of JavaScript code (e.g., see #broofa's answer, below) there are several common pitfalls:
Invalid id format (UUIDs must be of the form "xxxxxxxx-xxxx-Mxxx-Nxxx-xxxxxxxxxxxx", where x is one of [0-9, a-f] M is one of [1-5], and N is [8, 9, a, or b]
Use of a low-quality source of randomness (such as Math.random)
Thus, developers writing code for production environments are encouraged to use a rigorous, well-maintained implementation such as the uuid module.
I really like how clean Broofa's answer is, but it's unfortunate that poor implementations of Math.random leave the chance for collision.
Here's a similar RFC4122 version 4 compliant solution that solves that issue by offsetting the first 13 hex numbers by a hex portion of the timestamp, and once depleted offsets by a hex portion of the microseconds since pageload. That way, even if Math.random is on the same seed, both clients would have to generate the UUID the exact same number of microseconds since pageload (if high-perfomance time is supported) AND at the exact same millisecond (or 10,000+ years later) to get the same UUID:
function generateUUID() { // Public Domain/MIT
var d = new Date().getTime();//Timestamp
var d2 = ((typeof performance !== 'undefined') && performance.now && (performance.now()*1000)) || 0;//Time in microseconds since page-load or 0 if unsupported
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
var r = Math.random() * 16;//random number between 0 and 16
if(d > 0){//Use timestamp until depleted
r = (d + r)%16 | 0;
d = Math.floor(d/16);
} else {//Use microseconds since page-load if supported
r = (d2 + r)%16 | 0;
d2 = Math.floor(d2/16);
}
return (c === 'x' ? r : (r & 0x3 | 0x8)).toString(16);
});
}
var onClick = function(){
document.getElementById('uuid').textContent = generateUUID();
}
onClick();
#uuid { font-family: monospace; font-size: 1.5em; }
<p id="uuid"></p>
<button id="generateUUID" onclick="onClick();">Generate UUID</button>
Here's a fiddle to test.
Modernized snippet for ES6
const generateUUID = () => {
let
d = new Date().getTime(),
d2 = ((typeof performance !== 'undefined') && performance.now && (performance.now() * 1000)) || 0;
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, c => {
let r = Math.random() * 16;
if (d > 0) {
r = (d + r) % 16 | 0;
d = Math.floor(d / 16);
} else {
r = (d2 + r) % 16 | 0;
d2 = Math.floor(d2 / 16);
}
return (c == 'x' ? r : (r & 0x7 | 0x8)).toString(16);
});
};
const onClick = (e) => document.getElementById('uuid').textContent = generateUUID();
document.getElementById('generateUUID').addEventListener('click', onClick);
onClick();
#uuid { font-family: monospace; font-size: 1.5em; }
<p id="uuid"></p>
<button id="generateUUID">Generate UUID</button>
broofa's answer is pretty slick, indeed - impressively clever, really... RFC4122 compliant, somewhat readable, and compact. Awesome!
But if you're looking at that regular expression, those many replace() callbacks, toString()'s and Math.random() function calls (where he's only using four bits of the result and wasting the rest), you may start to wonder about performance. Indeed, joelpt even decided to toss out an RFC for generic GUID speed with generateQuickGUID.
But, can we get speed and RFC compliance? I say, YES! Can we maintain readability? Well... Not really, but it's easy if you follow along.
But first, my results, compared to broofa, guid (the accepted answer), and the non-rfc-compliant generateQuickGuid:
Desktop Android
broofa: 1617ms 12869ms
e1: 636ms 5778ms
e2: 606ms 4754ms
e3: 364ms 3003ms
e4: 329ms 2015ms
e5: 147ms 1156ms
e6: 146ms 1035ms
e7: 105ms 726ms
guid: 962ms 10762ms
generateQuickGuid: 292ms 2961ms
- Note: 500k iterations, results will vary by browser/CPU.
So by my 6th iteration of optimizations, I beat the most popular answer by over 12 times, the accepted answer by over 9 times, and the fast-non-compliant answer by 2-3 times. And I'm still RFC 4122 compliant.
Interested in how? I've put the full source on http://jsfiddle.net/jcward/7hyaC/3/ and on https://jsben.ch/xczxS
For an explanation, let's start with broofa's code:
function broofa() {
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
var r = Math.random()*16|0, v = c == 'x' ? r : (r&0x3|0x8);
return v.toString(16);
});
}
console.log(broofa())
So it replaces x with any random hexadecimal digit, y with random data (except forcing the top two bits to 10 per the RFC spec), and the regex doesn't match the - or 4 characters, so he doesn't have to deal with them. Very, very slick.
The first thing to know is that function calls are expensive, as are regular expressions (though he only uses 1, it has 32 callbacks, one for each match, and in each of the 32 callbacks it calls Math.random() and v.toString(16)).
The first step toward performance is to eliminate the RegEx and its callback functions and use a simple loop instead. This means we have to deal with the - and 4 characters whereas broofa did not. Also, note that we can use String Array indexing to keep his slick String template architecture:
function e1() {
var u='',i=0;
while(i++<36) {
var c='xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'[i-1],r=Math.random()*16|0,v=c=='x'?r:(r&0x3|0x8);
u+=(c=='-'||c=='4')?c:v.toString(16)
}
return u;
}
console.log(e1())
Basically, the same inner logic, except we check for - or 4, and using a while loop (instead of replace() callbacks) gets us an almost 3X improvement!
The next step is a small one on the desktop but makes a decent difference on mobile. Let's make fewer Math.random() calls and utilize all those random bits instead of throwing 87% of them away with a random buffer that gets shifted out each iteration. Let's also move that template definition out of the loop, just in case it helps:
function e2() {
var u='',m='xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx',i=0,rb=Math.random()*0xffffffff|0;
while(i++<36) {
var c=m[i-1],r=rb&0xf,v=c=='x'?r:(r&0x3|0x8);
u+=(c=='-'||c=='4')?c:v.toString(16);rb=i%8==0?Math.random()*0xffffffff|0:rb>>4
}
return u
}
console.log(e2())
This saves us 10-30% depending on platform. Not bad. But the next big step gets rid of the toString function calls altogether with an optimization classic - the look-up table. A simple 16-element lookup table will perform the job of toString(16) in much less time:
function e3() {
var h='0123456789abcdef';
var k='xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx';
/* same as e4() below */
}
function e4() {
var h=['0','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'];
var k=['x','x','x','x','x','x','x','x','-','x','x','x','x','-','4','x','x','x','-','y','x','x','x','-','x','x','x','x','x','x','x','x','x','x','x','x'];
var u='',i=0,rb=Math.random()*0xffffffff|0;
while(i++<36) {
var c=k[i-1],r=rb&0xf,v=c=='x'?r:(r&0x3|0x8);
u+=(c=='-'||c=='4')?c:h[v];rb=i%8==0?Math.random()*0xffffffff|0:rb>>4
}
return u
}
console.log(e4())
The next optimization is another classic. Since we're only handling four bits of output in each loop iteration, let's cut the number of loops in half and process eight bits in each iteration. This is tricky since we still have to handle the RFC compliant bit positions, but it's not too hard. We then have to make a larger lookup table (16x16, or 256) to store 0x00 - 0xFF, and we build it only once, outside the e5() function.
var lut = []; for (var i=0; i<256; i++) { lut[i] = (i<16?'0':'')+(i).toString(16); }
function e5() {
var k=['x','x','x','x','-','x','x','-','4','x','-','y','x','-','x','x','x','x','x','x'];
var u='',i=0,rb=Math.random()*0xffffffff|0;
while(i++<20) {
var c=k[i-1],r=rb&0xff,v=c=='x'?r:(c=='y'?(r&0x3f|0x80):(r&0xf|0x40));
u+=(c=='-')?c:lut[v];rb=i%4==0?Math.random()*0xffffffff|0:rb>>8
}
return u
}
console.log(e5())
I tried an e6() that processes 16-bits at a time, still using the 256-element LUT, and it showed the diminishing returns of optimization. Though it had fewer iterations, the inner logic was complicated by the increased processing, and it performed the same on desktop, and only ~10% faster on mobile.
The final optimization technique to apply - unroll the loop. Since we're looping a fixed number of times, we can technically write this all out by hand. I tried this once with a single random variable, r, that I kept reassigning, and performance tanked. But with four variables assigned random data up front, then using the lookup table, and applying the proper RFC bits, this version smokes them all:
var lut = []; for (var i=0; i<256; i++) { lut[i] = (i<16?'0':'')+(i).toString(16); }
function e7()
{
var d0 = Math.random()*0xffffffff|0;
var d1 = Math.random()*0xffffffff|0;
var d2 = Math.random()*0xffffffff|0;
var d3 = Math.random()*0xffffffff|0;
return lut[d0&0xff]+lut[d0>>8&0xff]+lut[d0>>16&0xff]+lut[d0>>24&0xff]+'-'+
lut[d1&0xff]+lut[d1>>8&0xff]+'-'+lut[d1>>16&0x0f|0x40]+lut[d1>>24&0xff]+'-'+
lut[d2&0x3f|0x80]+lut[d2>>8&0xff]+'-'+lut[d2>>16&0xff]+lut[d2>>24&0xff]+
lut[d3&0xff]+lut[d3>>8&0xff]+lut[d3>>16&0xff]+lut[d3>>24&0xff];
}
console.log(e7())
Modualized: http://jcward.com/UUID.js - UUID.generate()
The funny thing is, generating 16 bytes of random data is the easy part. The whole trick is expressing it in string format with RFC compliance, and it's most tightly accomplished with 16 bytes of random data, an unrolled loop and lookup table.
I hope my logic is correct -- it's very easy to make a mistake in this kind of tedious bit work. But the outputs look good to me. I hope you enjoyed this mad ride through code optimization!
Be advised: my primary goal was to show and teach potential optimization strategies. Other answers cover important topics such as collisions and truly random numbers, which are important for generating good UUIDs.
Use:
let uniqueId = Date.now().toString(36) + Math.random().toString(36).substring(2);
document.getElementById("unique").innerHTML =
Math.random().toString(36).substring(2) + (new Date()).getTime().toString(36);
<div id="unique">
</div>
If IDs are generated more than 1 millisecond apart, they are 100% unique.
If two IDs are generated at shorter intervals, and assuming that the random method is truly random, this would generate IDs that are 99.99999999999999% likely to be globally unique (collision in 1 of 10^15).
You can increase this number by adding more digits, but to generate 100% unique IDs you will need to use a global counter.
If you need RFC compatibility, this formatting will pass as a valid version 4 GUID:
let u = Date.now().toString(16) + Math.random().toString(16) + '0'.repeat(16);
let guid = [u.substr(0,8), u.substr(8,4), '4000-8' + u.substr(13,3), u.substr(16,12)].join('-');
let u = Date.now().toString(16)+Math.random().toString(16)+'0'.repeat(16);
let guid = [u.substr(0,8), u.substr(8,4), '4000-8' + u.substr(13,3), u.substr(16,12)].join('-');
document.getElementById("unique").innerHTML = guid;
<div id="unique">
</div>
The above code follow the intention, but not the letter of the RFC. Among other discrepancies it's a few random digits short. (Add more random digits if you need it) The upside is that this is really fast :)
You can test validity of your GUID here
Here's some code based on RFC 4122, section 4.4 (Algorithms for Creating a UUID from Truly Random or Pseudo-Random Number).
function createUUID() {
// http://www.ietf.org/rfc/rfc4122.txt
var s = [];
var hexDigits = "0123456789abcdef";
for (var i = 0; i < 36; i++) {
s[i] = hexDigits.substr(Math.floor(Math.random() * 0x10), 1);
}
s[14] = "4"; // bits 12-15 of the time_hi_and_version field to 0010
s[19] = hexDigits.substr((s[19] & 0x3) | 0x8, 1); // bits 6-7 of the clock_seq_hi_and_reserved to 01
s[8] = s[13] = s[18] = s[23] = "-";
var uuid = s.join("");
return uuid;
}
This is the fastest GUID-like string generator method in the format XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX. It does not generate a standard-compliant GUID.
Ten million executions of this implementation take just 32.5 seconds, which is the fastest I've ever seen in a browser (the only solution without loops/iterations).
The function is as simple as:
/**
* Generates a GUID string.
* #returns {string} The generated GUID.
* #example af8a8416-6e18-a307-bd9c-f2c947bbb3aa
* #author Slavik Meltser.
* #link http://slavik.meltser.info/?p=142
*/
function guid() {
function _p8(s) {
var p = (Math.random().toString(16)+"000000000").substr(2,8);
return s ? "-" + p.substr(0,4) + "-" + p.substr(4,4) : p ;
}
return _p8() + _p8(true) + _p8(true) + _p8();
}
To test the performance, you can run this code:
console.time('t');
for (var i = 0; i < 10000000; i++) {
guid();
};
console.timeEnd('t');
I'm sure most of you will understand what I did there, but maybe there is at least one person that will need an explanation:
The algorithm:
The Math.random() function returns a decimal number between 0 and 1 with 16 digits after the decimal fraction point (for
example 0.4363923368509859).
Then we take this number and convert
it to a string with base 16 (from the example above we'll get
0.6fb7687f).
Math.random().toString(16).
Then we cut off the 0. prefix (0.6fb7687f =>
6fb7687f) and get a string with eight hexadecimal
characters long.
(Math.random().toString(16).substr(2,8).
Sometimes the Math.random() function will return
shorter number (for example 0.4363), due to zeros at the end (from the example above, actually the number is 0.4363000000000000). That's why I'm appending to this string "000000000" (a string with nine zeros) and then cutting it off with substr() function to make it nine characters exactly (filling zeros to the right).
The reason for adding exactly nine zeros is because of the worse case scenario, which is when the Math.random() function will return exactly 0 or 1 (probability of 1/10^16 for each one of them). That's why we needed to add nine zeros to it ("0"+"000000000" or "1"+"000000000"), and then cutting it off from the second index (third character) with a length of eight characters. For the rest of the cases, the addition of zeros will not harm the result because it is cutting it off anyway.
Math.random().toString(16)+"000000000").substr(2,8).
The assembly:
The GUID is in the following format XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
I divided the GUID into four pieces, each piece divided into two types (or formats): XXXXXXXX and -XXXX-XXXX.
Now I'm building the GUID using these two types to assemble the GUID with call four pieces, as follows: XXXXXXXX -XXXX-XXXX -XXXX-XXXX XXXXXXXX.
To differ between these two types, I added a flag parameter to a pair creator function _p8(s), the s parameter tells the function whether to add dashes or not.
Eventually we build the GUID with the following chaining: _p8() + _p8(true) + _p8(true) + _p8(), and return it.
Link to this post on my blog
Enjoy! :-)
Here is a totally non-compliant but very performant implementation to generate an ASCII-safe GUID-like unique identifier.
function generateQuickGuid() {
return Math.random().toString(36).substring(2, 15) +
Math.random().toString(36).substring(2, 15);
}
Generates 26 [a-z0-9] characters, yielding a UID that is both shorter and more unique than RFC compliant GUIDs. Dashes can be trivially added if human-readability matters.
Here are usage examples and timings for this function and several of this question's other answers. The timing was performed under Chrome m25, 10 million iterations each.
>>> generateQuickGuid()
"nvcjf1hs7tf8yyk4lmlijqkuo9"
"yq6gipxqta4kui8z05tgh9qeel"
"36dh5sec7zdj90sk2rx7pjswi2"
runtime: 32.5s
>>> GUID() // John Millikin
"7a342ca2-e79f-528e-6302-8f901b0b6888"
runtime: 57.8s
>>> regexGuid() // broofa
"396e0c46-09e4-4b19-97db-bd423774a4b3"
runtime: 91.2s
>>> createUUID() // Kevin Hakanson
"403aa1ab-9f70-44ec-bc08-5d5ac56bd8a5"
runtime: 65.9s
>>> UUIDv4() // Jed Schmidt
"f4d7d31f-fa83-431a-b30c-3e6cc37cc6ee"
runtime: 282.4s
>>> Math.uuid() // broofa
"5BD52F55-E68F-40FC-93C2-90EE069CE545"
runtime: 225.8s
>>> Math.uuidFast() // broofa
"6CB97A68-23A2-473E-B75B-11263781BBE6"
runtime: 92.0s
>>> Math.uuidCompact() // broofa
"3d7b7a06-0a67-4b67-825c-e5c43ff8c1e8"
runtime: 229.0s
>>> bitwiseGUID() // jablko
"baeaa2f-7587-4ff1-af23-eeab3e92"
runtime: 79.6s
>>>> betterWayGUID() // Andrea Turri
"383585b0-9753-498d-99c3-416582e9662c"
runtime: 60.0s
>>>> UUID() // John Fowler
"855f997b-4369-4cdb-b7c9-7142ceaf39e8"
runtime: 62.2s
Here is the timing code.
var r;
console.time('t');
for (var i = 0; i < 10000000; i++) {
r = FuncToTest();
};
console.timeEnd('t');
From sagi shkedy's technical blog:
function generateGuid() {
var result, i, j;
result = '';
for(j=0; j<32; j++) {
if( j == 8 || j == 12 || j == 16 || j == 20)
result = result + '-';
i = Math.floor(Math.random()*16).toString(16).toUpperCase();
result = result + i;
}
return result;
}
There are other methods that involve using an ActiveX control, but stay away from these!
I thought it was worth pointing out that no GUID generator can guarantee unique keys (check the Wikipedia article). There is always a chance of collisions. A GUID simply offers a large enough universe of keys to reduce the change of collisions to almost nil.
Here is a combination of the top voted answer, with a workaround for Chrome's collisions:
generateGUID = (typeof(window.crypto) != 'undefined' &&
typeof(window.crypto.getRandomValues) != 'undefined') ?
function() {
// If we have a cryptographically secure PRNG, use that
// https://stackoverflow.com/questions/6906916/collisions-when-generating-uuids-in-javascript
var buf = new Uint16Array(8);
window.crypto.getRandomValues(buf);
var S4 = function(num) {
var ret = num.toString(16);
while(ret.length < 4){
ret = "0"+ret;
}
return ret;
};
return (S4(buf[0])+S4(buf[1])+"-"+S4(buf[2])+"-"+S4(buf[3])+"-"+S4(buf[4])+"-"+S4(buf[5])+S4(buf[6])+S4(buf[7]));
}
:
function() {
// Otherwise, just use Math.random
// https://stackoverflow.com/questions/105034/how-to-create-a-guid-uuid-in-javascript/2117523#2117523
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
var r = Math.random()*16|0, v = c == 'x' ? r : (r&0x3|0x8);
return v.toString(16);
});
};
It is on jsbin if you want to test it.
Here's a solution dated Oct. 9, 2011 from a comment by user jed at https://gist.github.com/982883:
UUIDv4 = function b(a){return a?(a^Math.random()*16>>a/4).toString(16):([1e7]+-1e3+-4e3+-8e3+-1e11).replace(/[018]/g,b)}
This accomplishes the same goal as the current highest-rated answer, but in 50+ fewer bytes by exploiting coercion, recursion, and exponential notation. For those curious how it works, here's the annotated form of an older version of the function:
UUIDv4 =
function b(
a // placeholder
){
return a // if the placeholder was passed, return
? ( // a random number from 0 to 15
a ^ // unless b is 8,
Math.random() // in which case
* 16 // a random number from
>> a/4 // 8 to 11
).toString(16) // in hexadecimal
: ( // or otherwise a concatenated string:
[1e7] + // 10000000 +
-1e3 + // -1000 +
-4e3 + // -4000 +
-8e3 + // -80000000 +
-1e11 // -100000000000,
).replace( // replacing
/[018]/g, // zeroes, ones, and eights with
b // random hex digits
)
}
You can use node-uuid. It provides simple, fast generation of RFC4122 UUIDS.
Features:
Generate RFC4122 version 1 or version 4 UUIDs
Runs in Node.js and browsers.
Cryptographically strong random # generation on supporting platforms.
Small footprint (Want something smaller? Check this out!)
Install Using NPM:
npm install uuid
Or using uuid via a browser:
Download Raw File (uuid v1): https://raw.githubusercontent.com/kelektiv/node-uuid/master/v1.js
Download Raw File (uuid v4): https://raw.githubusercontent.com/kelektiv/node-uuid/master/v4.js
Want even smaller? Check this out: https://gist.github.com/jed/982883
Usage:
// Generate a v1 UUID (time-based)
const uuidV1 = require('uuid/v1');
uuidV1(); // -> '6c84fb90-12c4-11e1-840d-7b25c5ee775a'
// Generate a v4 UUID (random)
const uuidV4 = require('uuid/v4');
uuidV4(); // -> '110ec58a-a0f2-4ac4-8393-c866d813b8d1'
// Generate a v5 UUID (namespace)
const uuidV5 = require('uuid/v5');
// ... using predefined DNS namespace (for domain names)
uuidV5('hello.example.com', v5.DNS)); // -> 'fdda765f-fc57-5604-a269-52a7df8164ec'
// ... using predefined URL namespace (for, well, URLs)
uuidV5('http://example.com/hello', v5.URL); // -> '3bbcee75-cecc-5b56-8031-b6641c1ed1f1'
// ... using a custom namespace
const MY_NAMESPACE = '(previously generated unique uuid string)';
uuidV5('hello', MY_NAMESPACE); // -> '90123e1c-7512-523e-bb28-76fab9f2f73d'
ECMAScript 2015 (ES6):
import uuid from 'uuid/v4';
const id = uuid();
var uuid = function() {
var buf = new Uint32Array(4);
window.crypto.getRandomValues(buf);
var idx = -1;
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
idx++;
var r = (buf[idx>>3] >> ((idx%8)*4))&15;
var v = c == 'x' ? r : (r&0x3|0x8);
return v.toString(16);
});
};
This version is based on Briguy37's answer and some bitwise operators to extract nibble sized windows from the buffer.
It should adhere to the RFC Type 4 (random) schema, since I had problems last time parsing non-compliant UUIDs with Java's UUID.
This creates a version 4 UUID (created from pseudo random numbers):
function uuid()
{
var chars = '0123456789abcdef'.split('');
var uuid = [], rnd = Math.random, r;
uuid[8] = uuid[13] = uuid[18] = uuid[23] = '-';
uuid[14] = '4'; // version 4
for (var i = 0; i < 36; i++)
{
if (!uuid[i])
{
r = 0 | rnd()*16;
uuid[i] = chars[(i == 19) ? (r & 0x3) | 0x8 : r & 0xf];
}
}
return uuid.join('');
}
Here is a sample of the UUIDs generated:
682db637-0f31-4847-9cdf-25ba9613a75c
97d19478-3ab2-4aa1-b8cc-a1c3540f54aa
2eed04c9-2692-456d-a0fd-51012f947136
One line solution using Blobs.
window.URL.createObjectURL(new Blob([])).substring(31);
The value at the end (31) depends on the length of the URL.
EDIT:
A more compact and universal solution, as suggested by rinogo:
URL.createObjectURL(new Blob([])).substr(-36);
Simple JavaScript module as a combination of best answers in this question.
var crypto = window.crypto || window.msCrypto || null; // IE11 fix
var Guid = Guid || (function() {
var EMPTY = '00000000-0000-0000-0000-000000000000';
var _padLeft = function(paddingString, width, replacementChar) {
return paddingString.length >= width ? paddingString : _padLeft(replacementChar + paddingString, width, replacementChar || ' ');
};
var _s4 = function(number) {
var hexadecimalResult = number.toString(16);
return _padLeft(hexadecimalResult, 4, '0');
};
var _cryptoGuid = function() {
var buffer = new window.Uint16Array(8);
crypto.getRandomValues(buffer);
return [_s4(buffer[0]) + _s4(buffer[1]), _s4(buffer[2]), _s4(buffer[3]), _s4(buffer[4]), _s4(buffer[5]) + _s4(buffer[6]) + _s4(buffer[7])].join('-');
};
var _guid = function() {
var currentDateMilliseconds = new Date().getTime();
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(currentChar) {
var randomChar = (currentDateMilliseconds + Math.random() * 16) % 16 | 0;
currentDateMilliseconds = Math.floor(currentDateMilliseconds / 16);
return (currentChar === 'x' ? randomChar : (randomChar & 0x7 | 0x8)).toString(16);
});
};
var create = function() {
var hasCrypto = crypto != 'undefined' && crypto !== null,
hasRandomValues = typeof(window.crypto.getRandomValues) != 'undefined';
return (hasCrypto && hasRandomValues) ? _cryptoGuid() : _guid();
};
return {
newGuid: create,
empty: EMPTY
};
})();
// DEMO: Create and show GUID
console.log('1. New Guid: ' + Guid.newGuid());
// DEMO: Show empty GUID
console.log('2. Empty Guid: ' + Guid.empty);
Usage:
Guid.newGuid()
"c6c2d12f-d76b-5739-e551-07e6de5b0807"
Guid.empty
"00000000-0000-0000-0000-000000000000"
The version below is an adaptation of broofa's answer, but updated to include a "true" random function that uses crypto libraries where available, and the Alea() function as a fallback.
Math.log2 = Math.log2 || function(n){ return Math.log(n) / Math.log(2); }
Math.trueRandom = (function() {
var crypt = window.crypto || window.msCrypto;
if (crypt && crypt.getRandomValues) {
// If we have a crypto library, use it
var random = function(min, max) {
var rval = 0;
var range = max - min;
if (range < 2) {
return min;
}
var bits_needed = Math.ceil(Math.log2(range));
if (bits_needed > 53) {
throw new Exception("We cannot generate numbers larger than 53 bits.");
}
var bytes_needed = Math.ceil(bits_needed / 8);
var mask = Math.pow(2, bits_needed) - 1;
// 7776 -> (2^13 = 8192) -1 == 8191 or 0x00001111 11111111
// Create byte array and fill with N random numbers
var byteArray = new Uint8Array(bytes_needed);
crypt.getRandomValues(byteArray);
var p = (bytes_needed - 1) * 8;
for(var i = 0; i < bytes_needed; i++ ) {
rval += byteArray[i] * Math.pow(2, p);
p -= 8;
}
// Use & to apply the mask and reduce the number of recursive lookups
rval = rval & mask;
if (rval >= range) {
// Integer out of acceptable range
return random(min, max);
}
// Return an integer that falls within the range
return min + rval;
}
return function() {
var r = random(0, 1000000000) / 1000000000;
return r;
};
} else {
// From https://web.archive.org/web/20120502223108/http://baagoe.com/en/RandomMusings/javascript/
// Johannes Baagøe <baagoe#baagoe.com>, 2010
function Mash() {
var n = 0xefc8249d;
var mash = function(data) {
data = data.toString();
for (var i = 0; i < data.length; i++) {
n += data.charCodeAt(i);
var h = 0.02519603282416938 * n;
n = h >>> 0;
h -= n;
h *= n;
n = h >>> 0;
h -= n;
n += h * 0x100000000; // 2^32
}
return (n >>> 0) * 2.3283064365386963e-10; // 2^-32
};
mash.version = 'Mash 0.9';
return mash;
}
// From http://baagoe.com/en/RandomMusings/javascript/
function Alea() {
return (function(args) {
// Johannes Baagøe <baagoe#baagoe.com>, 2010
var s0 = 0;
var s1 = 0;
var s2 = 0;
var c = 1;
if (args.length == 0) {
args = [+new Date()];
}
var mash = Mash();
s0 = mash(' ');
s1 = mash(' ');
s2 = mash(' ');
for (var i = 0; i < args.length; i++) {
s0 -= mash(args[i]);
if (s0 < 0) {
s0 += 1;
}
s1 -= mash(args[i]);
if (s1 < 0) {
s1 += 1;
}
s2 -= mash(args[i]);
if (s2 < 0) {
s2 += 1;
}
}
mash = null;
var random = function() {
var t = 2091639 * s0 + c * 2.3283064365386963e-10; // 2^-32
s0 = s1;
s1 = s2;
return s2 = t - (c = t | 0);
};
random.uint32 = function() {
return random() * 0x100000000; // 2^32
};
random.fract53 = function() {
return random() +
(random() * 0x200000 | 0) * 1.1102230246251565e-16; // 2^-53
};
random.version = 'Alea 0.9';
random.args = args;
return random;
}(Array.prototype.slice.call(arguments)));
};
return Alea();
}
}());
Math.guid = function() {
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
var r = Math.trueRandom() * 16 | 0,
v = c == 'x' ? r : (r & 0x3 | 0x8);
return v.toString(16);
});
};
JavaScript project on GitHub - https://github.com/LiosK/UUID.js
UUID.js The RFC-compliant UUID generator for JavaScript.
See RFC 4122 http://www.ietf.org/rfc/rfc4122.txt.
Features Generates RFC 4122 compliant UUIDs.
Version 4 UUIDs (UUIDs from random numbers) and version 1 UUIDs
(time-based UUIDs) are available.
UUID object allows a variety of access to the UUID including access to
the UUID fields.
Low timestamp resolution of JavaScript is compensated by random
numbers.
// RFC 4122
//
// A UUID is 128 bits long
//
// String representation is five fields of 4, 2, 2, 2, and 6 bytes.
// Fields represented as lowercase, zero-filled, hexadecimal strings, and
// are separated by dash characters
//
// A version 4 UUID is generated by setting all but six bits to randomly
// chosen values
var uuid = [
Math.random().toString(16).slice(2, 10),
Math.random().toString(16).slice(2, 6),
// Set the four most significant bits (bits 12 through 15) of the
// time_hi_and_version field to the 4-bit version number from Section
// 4.1.3
(Math.random() * .0625 /* 0x.1 */ + .25 /* 0x.4 */).toString(16).slice(2, 6),
// Set the two most significant bits (bits 6 and 7) of the
// clock_seq_hi_and_reserved to zero and one, respectively
(Math.random() * .25 /* 0x.4 */ + .5 /* 0x.8 */).toString(16).slice(2, 6),
Math.random().toString(16).slice(2, 14)].join('-');
Added in: v15.6.0, v14.17.0 there is a built-in crypto.randomUUID() function.
import * as crypto from "crypto";
const uuid = crypto.randomUUID();
In the browser, crypto.randomUUID() is currently supported in Chromium 92+ and Firefox 95+.
For those wanting an RFC 4122 version 4 compliant solution with speed considerations (few calls to Math.random()):
var rand = Math.random;
function UUID() {
var nbr, randStr = "";
do {
randStr += (nbr = rand()).toString(16).substr(3, 6);
} while (randStr.length < 30);
return (
randStr.substr(0, 8) + "-" +
randStr.substr(8, 4) + "-4" +
randStr.substr(12, 3) + "-" +
((nbr*4|0)+8).toString(16) + // [89ab]
randStr.substr(15, 3) + "-" +
randStr.substr(18, 12)
);
}
console.log( UUID() );
The above function should have a decent balance between speed and randomness.
I wanted to understand broofa's answer, so I expanded it and added comments:
var uuid = function () {
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(
/[xy]/g,
function (match) {
/*
* Create a random nibble. The two clever bits of this code:
*
* - Bitwise operations will truncate floating point numbers
* - For a bitwise OR of any x, x | 0 = x
*
* So:
*
* Math.random * 16
*
* creates a random floating point number
* between 0 (inclusive) and 16 (exclusive) and
*
* | 0
*
* truncates the floating point number into an integer.
*/
var randomNibble = Math.random() * 16 | 0;
/*
* Resolves the variant field. If the variant field (delineated
* as y in the initial string) is matched, the nibble must
* match the mask (where x is a do-not-care bit):
*
* 10xx
*
* This is achieved by performing the following operations in
* sequence (where x is an intermediate result):
*
* - x & 0x3, which is equivalent to x % 3
* - x | 0x8, which is equivalent to x + 8
*
* This results in a nibble between 8 inclusive and 11 exclusive,
* (or 1000 and 1011 in binary), all of which satisfy the variant
* field mask above.
*/
var nibble = (match == 'y') ?
(randomNibble & 0x3 | 0x8) :
randomNibble;
/*
* Ensure the nibble integer is encoded as base 16 (hexadecimal).
*/
return nibble.toString(16);
}
);
};
ES6 sample
const guid=()=> {
const s4=()=> Math.floor((1 + Math.random()) * 0x10000).toString(16).substring(1);
return `${s4() + s4()}-${s4()}-${s4()}-${s4()}-${s4() + s4() + s4()}`;
}
I adjusted my own UUID/GUID generator with some extras here.
I'm using the following Kybos random number generator to be a bit more cryptographically sound.
Below is my script with the Mash and Kybos methods from baagoe.com excluded.
//UUID/Guid Generator
// use: UUID.create() or UUID.createSequential()
// convenience: UUID.empty, UUID.tryParse(string)
(function(w){
// From http://baagoe.com/en/RandomMusings/javascript/
// Johannes Baagøe <baagoe#baagoe.com>, 2010
//function Mash() {...};
// From http://baagoe.com/en/RandomMusings/javascript/
//function Kybos() {...};
var rnd = Kybos();
//UUID/GUID Implementation from http://frugalcoder.us/post/2012/01/13/javascript-guid-uuid-generator.aspx
var UUID = {
"empty": "00000000-0000-0000-0000-000000000000"
,"parse": function(input) {
var ret = input.toString().trim().toLowerCase().replace(/^[\s\r\n]+|[\{\}]|[\s\r\n]+$/g, "");
if ((/[a-f0-9]{8}\-[a-f0-9]{4}\-[a-f0-9]{4}\-[a-f0-9]{4}\-[a-f0-9]{12}/).test(ret))
return ret;
else
throw new Error("Unable to parse UUID");
}
,"createSequential": function() {
var ret = new Date().valueOf().toString(16).replace("-","")
for (;ret.length < 12; ret = "0" + ret);
ret = ret.substr(ret.length-12,12); //only least significant part
for (;ret.length < 32;ret += Math.floor(rnd() * 0xffffffff).toString(16));
return [ret.substr(0,8), ret.substr(8,4), "4" + ret.substr(12,3), "89AB"[Math.floor(Math.random()*4)] + ret.substr(16,3), ret.substr(20,12)].join("-");
}
,"create": function() {
var ret = "";
for (;ret.length < 32;ret += Math.floor(rnd() * 0xffffffff).toString(16));
return [ret.substr(0,8), ret.substr(8,4), "4" + ret.substr(12,3), "89AB"[Math.floor(Math.random()*4)] + ret.substr(16,3), ret.substr(20,12)].join("-");
}
,"random": function() {
return rnd();
}
,"tryParse": function(input) {
try {
return UUID.parse(input);
} catch(ex) {
return UUID.empty;
}
}
};
UUID["new"] = UUID.create;
w.UUID = w.Guid = UUID;
}(window || this));
The native URL.createObjectURL is generating an UUID. You can take advantage of this.
function uuid() {
const url = URL.createObjectURL(new Blob())
const [id] = url.toString().split('/').reverse()
URL.revokeObjectURL(url)
return id
}
The better way:
function(
a, b // Placeholders
){
for( // Loop :)
b = a = ''; // b - result , a - numeric variable
a++ < 36; //
b += a*51&52 // If "a" is not 9 or 14 or 19 or 24
? // return a random number or 4
(
a^15 // If "a" is not 15,
? // generate a random number from 0 to 15
8^Math.random() *
(a^20 ? 16 : 4) // unless "a" is 20, in which case a random number from 8 to 11,
:
4 // otherwise 4
).toString(16)
:
'-' // In other cases, (if "a" is 9,14,19,24) insert "-"
);
return b
}
Minimized:
function(a,b){for(b=a='';a++<36;b+=a*51&52?(a^15?8^Math.random()*(a^20?16:4):4).toString(16):'-');return b}
The following is simple code that uses crypto.getRandomValues(a) on supported browsers (Internet Explorer 11+, iOS 7+, Firefox 21+, Chrome, and Android Chrome).
It avoids using Math.random(), because that can cause collisions (for example 20 collisions for 4000 generated UUIDs in a real situation by Muxa).
function uuid() {
function randomDigit() {
if (crypto && crypto.getRandomValues) {
var rands = new Uint8Array(1);
crypto.getRandomValues(rands);
return (rands[0] % 16).toString(16);
} else {
return ((Math.random() * 16) | 0).toString(16);
}
}
var crypto = window.crypto || window.msCrypto;
return 'xxxxxxxx-xxxx-4xxx-8xxx-xxxxxxxxxxxx'.replace(/x/g, randomDigit);
}
Notes:
Optimised for code readability, not speed, so it is suitable for, say, a few hundred UUIDs per second. It generates about 10000 uuid() per second in Chromium on my laptop using http://jsbin.com/fuwigo/1 to measure performance.
It only uses 8 for "y" because that simplifies code readability (y is allowed to be 8, 9, A, or B).
If you just need a random 128 bit string in no particular format, you can use:
function uuid() {
return crypto.getRandomValues(new Uint32Array(4)).join('-');
}
Which will return something like 2350143528-4164020887-938913176-2513998651.
I couldn't find any answer that uses a single 16-octet TypedArray and a DataView, so I think the following solution for generating a version 4 UUID per the RFC will stand on its own here:
const uuid4 = () => {
const ho = (n, p) => n.toString(16).padStart(p, 0); /// Return the hexadecimal text representation of number `n`, padded with zeroes to be of length `p`
const data = crypto.getRandomValues(new Uint8Array(16)); /// Fill the buffer with random data
data[6] = (data[6] & 0xf) | 0x40; /// Patch the 6th byte to reflect a version 4 UUID
data[8] = (data[8] & 0x3f) | 0x80; /// Patch the 8th byte to reflect a variant 1 UUID (version 4 UUIDs are)
const view = new DataView(data.buffer); /// Create a view backed by a 16-byte buffer
return `${ho(view.getUint32(0), 8)}-${ho(view.getUint16(4), 4)}-${ho(view.getUint16(6), 4)}-${ho(view.getUint16(8), 4)}-${ho(view.getUint32(10), 8)}${ho(view.getUint16(14), 4)}`; /// Compile the canonical textual form from the array data
};
I prefer it because:
it only relies on functions available to the standard ECMAScript platform, where possible -- which is all but one procedure
it only uses a single buffer, minimizing copying of data, which should in theory yield performance advantages
At the time of writing this, getRandomValues is not something implemented for the crypto object in Node.js. However, it has the equivalent randomBytes function which may be used instead.
Just another more readable variant with just two mutations.
function uuid4()
{
function hex (s, b)
{
return s +
(b >>> 4 ).toString (16) + // high nibble
(b & 0b1111).toString (16); // low nibble
}
let r = crypto.getRandomValues (new Uint8Array (16));
r[6] = r[6] >>> 4 | 0b01000000; // Set type 4: 0100
r[8] = r[8] >>> 3 | 0b10000000; // Set variant: 100
return r.slice ( 0, 4).reduce (hex, '' ) +
r.slice ( 4, 6).reduce (hex, '-') +
r.slice ( 6, 8).reduce (hex, '-') +
r.slice ( 8, 10).reduce (hex, '-') +
r.slice (10, 16).reduce (hex, '-');
}
How do I create GUIDs (globally-unique identifiers) in JavaScript? The GUID / UUID should be at least 32 characters and should stay in the ASCII range to avoid trouble when passing them around.
I'm not sure what routines are available on all browsers, how "random" and seeded the built-in random number generator is, etc.
[Edited 2021-10-16 to reflect latest best-practices for producing RFC4122-compliant UUIDs]
Most readers here will want to use the uuid module. It is well-tested and supported.
The crypto.randomUUID() function is an emerging standard that is supported in Node.js and an increasing number of browsers. However because new browser APIs are restricted to secure contexts this method is only available to pages served locally (localhost or 127.0.0.1) or over HTTPS. If you're interested in seeing this restriction lifted for crypto.randomUUID() you can follow this GitHub issue.
If neither of those work for you, there is this method (based on the original answer to this question):
function uuidv4() {
return ([1e7]+-1e3+-4e3+-8e3+-1e11).replace(/[018]/g, c =>
(c ^ crypto.getRandomValues(new Uint8Array(1))[0] & 15 >> c / 4).toString(16)
);
}
console.log(uuidv4());
Note: The use of any UUID generator that relies on Math.random() is strongly discouraged (including snippets featured in previous versions of this answer) for reasons best explained here. TL;DR: solutions based on Math.random() do not provide good uniqueness guarantees.
UUIDs (Universally Unique IDentifier), also known as GUIDs (Globally Unique IDentifier), according to RFC 4122, are identifiers designed to provide certain uniqueness guarantees.
While it is possible to implement RFC-compliant UUIDs in a few lines of JavaScript code (e.g., see #broofa's answer, below) there are several common pitfalls:
Invalid id format (UUIDs must be of the form "xxxxxxxx-xxxx-Mxxx-Nxxx-xxxxxxxxxxxx", where x is one of [0-9, a-f] M is one of [1-5], and N is [8, 9, a, or b]
Use of a low-quality source of randomness (such as Math.random)
Thus, developers writing code for production environments are encouraged to use a rigorous, well-maintained implementation such as the uuid module.
I really like how clean Broofa's answer is, but it's unfortunate that poor implementations of Math.random leave the chance for collision.
Here's a similar RFC4122 version 4 compliant solution that solves that issue by offsetting the first 13 hex numbers by a hex portion of the timestamp, and once depleted offsets by a hex portion of the microseconds since pageload. That way, even if Math.random is on the same seed, both clients would have to generate the UUID the exact same number of microseconds since pageload (if high-perfomance time is supported) AND at the exact same millisecond (or 10,000+ years later) to get the same UUID:
function generateUUID() { // Public Domain/MIT
var d = new Date().getTime();//Timestamp
var d2 = ((typeof performance !== 'undefined') && performance.now && (performance.now()*1000)) || 0;//Time in microseconds since page-load or 0 if unsupported
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
var r = Math.random() * 16;//random number between 0 and 16
if(d > 0){//Use timestamp until depleted
r = (d + r)%16 | 0;
d = Math.floor(d/16);
} else {//Use microseconds since page-load if supported
r = (d2 + r)%16 | 0;
d2 = Math.floor(d2/16);
}
return (c === 'x' ? r : (r & 0x3 | 0x8)).toString(16);
});
}
var onClick = function(){
document.getElementById('uuid').textContent = generateUUID();
}
onClick();
#uuid { font-family: monospace; font-size: 1.5em; }
<p id="uuid"></p>
<button id="generateUUID" onclick="onClick();">Generate UUID</button>
Here's a fiddle to test.
Modernized snippet for ES6
const generateUUID = () => {
let
d = new Date().getTime(),
d2 = ((typeof performance !== 'undefined') && performance.now && (performance.now() * 1000)) || 0;
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, c => {
let r = Math.random() * 16;
if (d > 0) {
r = (d + r) % 16 | 0;
d = Math.floor(d / 16);
} else {
r = (d2 + r) % 16 | 0;
d2 = Math.floor(d2 / 16);
}
return (c == 'x' ? r : (r & 0x7 | 0x8)).toString(16);
});
};
const onClick = (e) => document.getElementById('uuid').textContent = generateUUID();
document.getElementById('generateUUID').addEventListener('click', onClick);
onClick();
#uuid { font-family: monospace; font-size: 1.5em; }
<p id="uuid"></p>
<button id="generateUUID">Generate UUID</button>
broofa's answer is pretty slick, indeed - impressively clever, really... RFC4122 compliant, somewhat readable, and compact. Awesome!
But if you're looking at that regular expression, those many replace() callbacks, toString()'s and Math.random() function calls (where he's only using four bits of the result and wasting the rest), you may start to wonder about performance. Indeed, joelpt even decided to toss out an RFC for generic GUID speed with generateQuickGUID.
But, can we get speed and RFC compliance? I say, YES! Can we maintain readability? Well... Not really, but it's easy if you follow along.
But first, my results, compared to broofa, guid (the accepted answer), and the non-rfc-compliant generateQuickGuid:
Desktop Android
broofa: 1617ms 12869ms
e1: 636ms 5778ms
e2: 606ms 4754ms
e3: 364ms 3003ms
e4: 329ms 2015ms
e5: 147ms 1156ms
e6: 146ms 1035ms
e7: 105ms 726ms
guid: 962ms 10762ms
generateQuickGuid: 292ms 2961ms
- Note: 500k iterations, results will vary by browser/CPU.
So by my 6th iteration of optimizations, I beat the most popular answer by over 12 times, the accepted answer by over 9 times, and the fast-non-compliant answer by 2-3 times. And I'm still RFC 4122 compliant.
Interested in how? I've put the full source on http://jsfiddle.net/jcward/7hyaC/3/ and on https://jsben.ch/xczxS
For an explanation, let's start with broofa's code:
function broofa() {
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
var r = Math.random()*16|0, v = c == 'x' ? r : (r&0x3|0x8);
return v.toString(16);
});
}
console.log(broofa())
So it replaces x with any random hexadecimal digit, y with random data (except forcing the top two bits to 10 per the RFC spec), and the regex doesn't match the - or 4 characters, so he doesn't have to deal with them. Very, very slick.
The first thing to know is that function calls are expensive, as are regular expressions (though he only uses 1, it has 32 callbacks, one for each match, and in each of the 32 callbacks it calls Math.random() and v.toString(16)).
The first step toward performance is to eliminate the RegEx and its callback functions and use a simple loop instead. This means we have to deal with the - and 4 characters whereas broofa did not. Also, note that we can use String Array indexing to keep his slick String template architecture:
function e1() {
var u='',i=0;
while(i++<36) {
var c='xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'[i-1],r=Math.random()*16|0,v=c=='x'?r:(r&0x3|0x8);
u+=(c=='-'||c=='4')?c:v.toString(16)
}
return u;
}
console.log(e1())
Basically, the same inner logic, except we check for - or 4, and using a while loop (instead of replace() callbacks) gets us an almost 3X improvement!
The next step is a small one on the desktop but makes a decent difference on mobile. Let's make fewer Math.random() calls and utilize all those random bits instead of throwing 87% of them away with a random buffer that gets shifted out each iteration. Let's also move that template definition out of the loop, just in case it helps:
function e2() {
var u='',m='xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx',i=0,rb=Math.random()*0xffffffff|0;
while(i++<36) {
var c=m[i-1],r=rb&0xf,v=c=='x'?r:(r&0x3|0x8);
u+=(c=='-'||c=='4')?c:v.toString(16);rb=i%8==0?Math.random()*0xffffffff|0:rb>>4
}
return u
}
console.log(e2())
This saves us 10-30% depending on platform. Not bad. But the next big step gets rid of the toString function calls altogether with an optimization classic - the look-up table. A simple 16-element lookup table will perform the job of toString(16) in much less time:
function e3() {
var h='0123456789abcdef';
var k='xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx';
/* same as e4() below */
}
function e4() {
var h=['0','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'];
var k=['x','x','x','x','x','x','x','x','-','x','x','x','x','-','4','x','x','x','-','y','x','x','x','-','x','x','x','x','x','x','x','x','x','x','x','x'];
var u='',i=0,rb=Math.random()*0xffffffff|0;
while(i++<36) {
var c=k[i-1],r=rb&0xf,v=c=='x'?r:(r&0x3|0x8);
u+=(c=='-'||c=='4')?c:h[v];rb=i%8==0?Math.random()*0xffffffff|0:rb>>4
}
return u
}
console.log(e4())
The next optimization is another classic. Since we're only handling four bits of output in each loop iteration, let's cut the number of loops in half and process eight bits in each iteration. This is tricky since we still have to handle the RFC compliant bit positions, but it's not too hard. We then have to make a larger lookup table (16x16, or 256) to store 0x00 - 0xFF, and we build it only once, outside the e5() function.
var lut = []; for (var i=0; i<256; i++) { lut[i] = (i<16?'0':'')+(i).toString(16); }
function e5() {
var k=['x','x','x','x','-','x','x','-','4','x','-','y','x','-','x','x','x','x','x','x'];
var u='',i=0,rb=Math.random()*0xffffffff|0;
while(i++<20) {
var c=k[i-1],r=rb&0xff,v=c=='x'?r:(c=='y'?(r&0x3f|0x80):(r&0xf|0x40));
u+=(c=='-')?c:lut[v];rb=i%4==0?Math.random()*0xffffffff|0:rb>>8
}
return u
}
console.log(e5())
I tried an e6() that processes 16-bits at a time, still using the 256-element LUT, and it showed the diminishing returns of optimization. Though it had fewer iterations, the inner logic was complicated by the increased processing, and it performed the same on desktop, and only ~10% faster on mobile.
The final optimization technique to apply - unroll the loop. Since we're looping a fixed number of times, we can technically write this all out by hand. I tried this once with a single random variable, r, that I kept reassigning, and performance tanked. But with four variables assigned random data up front, then using the lookup table, and applying the proper RFC bits, this version smokes them all:
var lut = []; for (var i=0; i<256; i++) { lut[i] = (i<16?'0':'')+(i).toString(16); }
function e7()
{
var d0 = Math.random()*0xffffffff|0;
var d1 = Math.random()*0xffffffff|0;
var d2 = Math.random()*0xffffffff|0;
var d3 = Math.random()*0xffffffff|0;
return lut[d0&0xff]+lut[d0>>8&0xff]+lut[d0>>16&0xff]+lut[d0>>24&0xff]+'-'+
lut[d1&0xff]+lut[d1>>8&0xff]+'-'+lut[d1>>16&0x0f|0x40]+lut[d1>>24&0xff]+'-'+
lut[d2&0x3f|0x80]+lut[d2>>8&0xff]+'-'+lut[d2>>16&0xff]+lut[d2>>24&0xff]+
lut[d3&0xff]+lut[d3>>8&0xff]+lut[d3>>16&0xff]+lut[d3>>24&0xff];
}
console.log(e7())
Modualized: http://jcward.com/UUID.js - UUID.generate()
The funny thing is, generating 16 bytes of random data is the easy part. The whole trick is expressing it in string format with RFC compliance, and it's most tightly accomplished with 16 bytes of random data, an unrolled loop and lookup table.
I hope my logic is correct -- it's very easy to make a mistake in this kind of tedious bit work. But the outputs look good to me. I hope you enjoyed this mad ride through code optimization!
Be advised: my primary goal was to show and teach potential optimization strategies. Other answers cover important topics such as collisions and truly random numbers, which are important for generating good UUIDs.
Use:
let uniqueId = Date.now().toString(36) + Math.random().toString(36).substring(2);
document.getElementById("unique").innerHTML =
Math.random().toString(36).substring(2) + (new Date()).getTime().toString(36);
<div id="unique">
</div>
If IDs are generated more than 1 millisecond apart, they are 100% unique.
If two IDs are generated at shorter intervals, and assuming that the random method is truly random, this would generate IDs that are 99.99999999999999% likely to be globally unique (collision in 1 of 10^15).
You can increase this number by adding more digits, but to generate 100% unique IDs you will need to use a global counter.
If you need RFC compatibility, this formatting will pass as a valid version 4 GUID:
let u = Date.now().toString(16) + Math.random().toString(16) + '0'.repeat(16);
let guid = [u.substr(0,8), u.substr(8,4), '4000-8' + u.substr(13,3), u.substr(16,12)].join('-');
let u = Date.now().toString(16)+Math.random().toString(16)+'0'.repeat(16);
let guid = [u.substr(0,8), u.substr(8,4), '4000-8' + u.substr(13,3), u.substr(16,12)].join('-');
document.getElementById("unique").innerHTML = guid;
<div id="unique">
</div>
The above code follow the intention, but not the letter of the RFC. Among other discrepancies it's a few random digits short. (Add more random digits if you need it) The upside is that this is really fast :)
You can test validity of your GUID here
Here's some code based on RFC 4122, section 4.4 (Algorithms for Creating a UUID from Truly Random or Pseudo-Random Number).
function createUUID() {
// http://www.ietf.org/rfc/rfc4122.txt
var s = [];
var hexDigits = "0123456789abcdef";
for (var i = 0; i < 36; i++) {
s[i] = hexDigits.substr(Math.floor(Math.random() * 0x10), 1);
}
s[14] = "4"; // bits 12-15 of the time_hi_and_version field to 0010
s[19] = hexDigits.substr((s[19] & 0x3) | 0x8, 1); // bits 6-7 of the clock_seq_hi_and_reserved to 01
s[8] = s[13] = s[18] = s[23] = "-";
var uuid = s.join("");
return uuid;
}
This is the fastest GUID-like string generator method in the format XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX. It does not generate a standard-compliant GUID.
Ten million executions of this implementation take just 32.5 seconds, which is the fastest I've ever seen in a browser (the only solution without loops/iterations).
The function is as simple as:
/**
* Generates a GUID string.
* #returns {string} The generated GUID.
* #example af8a8416-6e18-a307-bd9c-f2c947bbb3aa
* #author Slavik Meltser.
* #link http://slavik.meltser.info/?p=142
*/
function guid() {
function _p8(s) {
var p = (Math.random().toString(16)+"000000000").substr(2,8);
return s ? "-" + p.substr(0,4) + "-" + p.substr(4,4) : p ;
}
return _p8() + _p8(true) + _p8(true) + _p8();
}
To test the performance, you can run this code:
console.time('t');
for (var i = 0; i < 10000000; i++) {
guid();
};
console.timeEnd('t');
I'm sure most of you will understand what I did there, but maybe there is at least one person that will need an explanation:
The algorithm:
The Math.random() function returns a decimal number between 0 and 1 with 16 digits after the decimal fraction point (for
example 0.4363923368509859).
Then we take this number and convert
it to a string with base 16 (from the example above we'll get
0.6fb7687f).
Math.random().toString(16).
Then we cut off the 0. prefix (0.6fb7687f =>
6fb7687f) and get a string with eight hexadecimal
characters long.
(Math.random().toString(16).substr(2,8).
Sometimes the Math.random() function will return
shorter number (for example 0.4363), due to zeros at the end (from the example above, actually the number is 0.4363000000000000). That's why I'm appending to this string "000000000" (a string with nine zeros) and then cutting it off with substr() function to make it nine characters exactly (filling zeros to the right).
The reason for adding exactly nine zeros is because of the worse case scenario, which is when the Math.random() function will return exactly 0 or 1 (probability of 1/10^16 for each one of them). That's why we needed to add nine zeros to it ("0"+"000000000" or "1"+"000000000"), and then cutting it off from the second index (third character) with a length of eight characters. For the rest of the cases, the addition of zeros will not harm the result because it is cutting it off anyway.
Math.random().toString(16)+"000000000").substr(2,8).
The assembly:
The GUID is in the following format XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
I divided the GUID into four pieces, each piece divided into two types (or formats): XXXXXXXX and -XXXX-XXXX.
Now I'm building the GUID using these two types to assemble the GUID with call four pieces, as follows: XXXXXXXX -XXXX-XXXX -XXXX-XXXX XXXXXXXX.
To differ between these two types, I added a flag parameter to a pair creator function _p8(s), the s parameter tells the function whether to add dashes or not.
Eventually we build the GUID with the following chaining: _p8() + _p8(true) + _p8(true) + _p8(), and return it.
Link to this post on my blog
Enjoy! :-)
Here is a totally non-compliant but very performant implementation to generate an ASCII-safe GUID-like unique identifier.
function generateQuickGuid() {
return Math.random().toString(36).substring(2, 15) +
Math.random().toString(36).substring(2, 15);
}
Generates 26 [a-z0-9] characters, yielding a UID that is both shorter and more unique than RFC compliant GUIDs. Dashes can be trivially added if human-readability matters.
Here are usage examples and timings for this function and several of this question's other answers. The timing was performed under Chrome m25, 10 million iterations each.
>>> generateQuickGuid()
"nvcjf1hs7tf8yyk4lmlijqkuo9"
"yq6gipxqta4kui8z05tgh9qeel"
"36dh5sec7zdj90sk2rx7pjswi2"
runtime: 32.5s
>>> GUID() // John Millikin
"7a342ca2-e79f-528e-6302-8f901b0b6888"
runtime: 57.8s
>>> regexGuid() // broofa
"396e0c46-09e4-4b19-97db-bd423774a4b3"
runtime: 91.2s
>>> createUUID() // Kevin Hakanson
"403aa1ab-9f70-44ec-bc08-5d5ac56bd8a5"
runtime: 65.9s
>>> UUIDv4() // Jed Schmidt
"f4d7d31f-fa83-431a-b30c-3e6cc37cc6ee"
runtime: 282.4s
>>> Math.uuid() // broofa
"5BD52F55-E68F-40FC-93C2-90EE069CE545"
runtime: 225.8s
>>> Math.uuidFast() // broofa
"6CB97A68-23A2-473E-B75B-11263781BBE6"
runtime: 92.0s
>>> Math.uuidCompact() // broofa
"3d7b7a06-0a67-4b67-825c-e5c43ff8c1e8"
runtime: 229.0s
>>> bitwiseGUID() // jablko
"baeaa2f-7587-4ff1-af23-eeab3e92"
runtime: 79.6s
>>>> betterWayGUID() // Andrea Turri
"383585b0-9753-498d-99c3-416582e9662c"
runtime: 60.0s
>>>> UUID() // John Fowler
"855f997b-4369-4cdb-b7c9-7142ceaf39e8"
runtime: 62.2s
Here is the timing code.
var r;
console.time('t');
for (var i = 0; i < 10000000; i++) {
r = FuncToTest();
};
console.timeEnd('t');
From sagi shkedy's technical blog:
function generateGuid() {
var result, i, j;
result = '';
for(j=0; j<32; j++) {
if( j == 8 || j == 12 || j == 16 || j == 20)
result = result + '-';
i = Math.floor(Math.random()*16).toString(16).toUpperCase();
result = result + i;
}
return result;
}
There are other methods that involve using an ActiveX control, but stay away from these!
I thought it was worth pointing out that no GUID generator can guarantee unique keys (check the Wikipedia article). There is always a chance of collisions. A GUID simply offers a large enough universe of keys to reduce the change of collisions to almost nil.
Here is a combination of the top voted answer, with a workaround for Chrome's collisions:
generateGUID = (typeof(window.crypto) != 'undefined' &&
typeof(window.crypto.getRandomValues) != 'undefined') ?
function() {
// If we have a cryptographically secure PRNG, use that
// https://stackoverflow.com/questions/6906916/collisions-when-generating-uuids-in-javascript
var buf = new Uint16Array(8);
window.crypto.getRandomValues(buf);
var S4 = function(num) {
var ret = num.toString(16);
while(ret.length < 4){
ret = "0"+ret;
}
return ret;
};
return (S4(buf[0])+S4(buf[1])+"-"+S4(buf[2])+"-"+S4(buf[3])+"-"+S4(buf[4])+"-"+S4(buf[5])+S4(buf[6])+S4(buf[7]));
}
:
function() {
// Otherwise, just use Math.random
// https://stackoverflow.com/questions/105034/how-to-create-a-guid-uuid-in-javascript/2117523#2117523
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
var r = Math.random()*16|0, v = c == 'x' ? r : (r&0x3|0x8);
return v.toString(16);
});
};
It is on jsbin if you want to test it.
Here's a solution dated Oct. 9, 2011 from a comment by user jed at https://gist.github.com/982883:
UUIDv4 = function b(a){return a?(a^Math.random()*16>>a/4).toString(16):([1e7]+-1e3+-4e3+-8e3+-1e11).replace(/[018]/g,b)}
This accomplishes the same goal as the current highest-rated answer, but in 50+ fewer bytes by exploiting coercion, recursion, and exponential notation. For those curious how it works, here's the annotated form of an older version of the function:
UUIDv4 =
function b(
a // placeholder
){
return a // if the placeholder was passed, return
? ( // a random number from 0 to 15
a ^ // unless b is 8,
Math.random() // in which case
* 16 // a random number from
>> a/4 // 8 to 11
).toString(16) // in hexadecimal
: ( // or otherwise a concatenated string:
[1e7] + // 10000000 +
-1e3 + // -1000 +
-4e3 + // -4000 +
-8e3 + // -80000000 +
-1e11 // -100000000000,
).replace( // replacing
/[018]/g, // zeroes, ones, and eights with
b // random hex digits
)
}
You can use node-uuid. It provides simple, fast generation of RFC4122 UUIDS.
Features:
Generate RFC4122 version 1 or version 4 UUIDs
Runs in Node.js and browsers.
Cryptographically strong random # generation on supporting platforms.
Small footprint (Want something smaller? Check this out!)
Install Using NPM:
npm install uuid
Or using uuid via a browser:
Download Raw File (uuid v1): https://raw.githubusercontent.com/kelektiv/node-uuid/master/v1.js
Download Raw File (uuid v4): https://raw.githubusercontent.com/kelektiv/node-uuid/master/v4.js
Want even smaller? Check this out: https://gist.github.com/jed/982883
Usage:
// Generate a v1 UUID (time-based)
const uuidV1 = require('uuid/v1');
uuidV1(); // -> '6c84fb90-12c4-11e1-840d-7b25c5ee775a'
// Generate a v4 UUID (random)
const uuidV4 = require('uuid/v4');
uuidV4(); // -> '110ec58a-a0f2-4ac4-8393-c866d813b8d1'
// Generate a v5 UUID (namespace)
const uuidV5 = require('uuid/v5');
// ... using predefined DNS namespace (for domain names)
uuidV5('hello.example.com', v5.DNS)); // -> 'fdda765f-fc57-5604-a269-52a7df8164ec'
// ... using predefined URL namespace (for, well, URLs)
uuidV5('http://example.com/hello', v5.URL); // -> '3bbcee75-cecc-5b56-8031-b6641c1ed1f1'
// ... using a custom namespace
const MY_NAMESPACE = '(previously generated unique uuid string)';
uuidV5('hello', MY_NAMESPACE); // -> '90123e1c-7512-523e-bb28-76fab9f2f73d'
ECMAScript 2015 (ES6):
import uuid from 'uuid/v4';
const id = uuid();
var uuid = function() {
var buf = new Uint32Array(4);
window.crypto.getRandomValues(buf);
var idx = -1;
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
idx++;
var r = (buf[idx>>3] >> ((idx%8)*4))&15;
var v = c == 'x' ? r : (r&0x3|0x8);
return v.toString(16);
});
};
This version is based on Briguy37's answer and some bitwise operators to extract nibble sized windows from the buffer.
It should adhere to the RFC Type 4 (random) schema, since I had problems last time parsing non-compliant UUIDs with Java's UUID.
This creates a version 4 UUID (created from pseudo random numbers):
function uuid()
{
var chars = '0123456789abcdef'.split('');
var uuid = [], rnd = Math.random, r;
uuid[8] = uuid[13] = uuid[18] = uuid[23] = '-';
uuid[14] = '4'; // version 4
for (var i = 0; i < 36; i++)
{
if (!uuid[i])
{
r = 0 | rnd()*16;
uuid[i] = chars[(i == 19) ? (r & 0x3) | 0x8 : r & 0xf];
}
}
return uuid.join('');
}
Here is a sample of the UUIDs generated:
682db637-0f31-4847-9cdf-25ba9613a75c
97d19478-3ab2-4aa1-b8cc-a1c3540f54aa
2eed04c9-2692-456d-a0fd-51012f947136
One line solution using Blobs.
window.URL.createObjectURL(new Blob([])).substring(31);
The value at the end (31) depends on the length of the URL.
EDIT:
A more compact and universal solution, as suggested by rinogo:
URL.createObjectURL(new Blob([])).substr(-36);
Simple JavaScript module as a combination of best answers in this question.
var crypto = window.crypto || window.msCrypto || null; // IE11 fix
var Guid = Guid || (function() {
var EMPTY = '00000000-0000-0000-0000-000000000000';
var _padLeft = function(paddingString, width, replacementChar) {
return paddingString.length >= width ? paddingString : _padLeft(replacementChar + paddingString, width, replacementChar || ' ');
};
var _s4 = function(number) {
var hexadecimalResult = number.toString(16);
return _padLeft(hexadecimalResult, 4, '0');
};
var _cryptoGuid = function() {
var buffer = new window.Uint16Array(8);
crypto.getRandomValues(buffer);
return [_s4(buffer[0]) + _s4(buffer[1]), _s4(buffer[2]), _s4(buffer[3]), _s4(buffer[4]), _s4(buffer[5]) + _s4(buffer[6]) + _s4(buffer[7])].join('-');
};
var _guid = function() {
var currentDateMilliseconds = new Date().getTime();
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(currentChar) {
var randomChar = (currentDateMilliseconds + Math.random() * 16) % 16 | 0;
currentDateMilliseconds = Math.floor(currentDateMilliseconds / 16);
return (currentChar === 'x' ? randomChar : (randomChar & 0x7 | 0x8)).toString(16);
});
};
var create = function() {
var hasCrypto = crypto != 'undefined' && crypto !== null,
hasRandomValues = typeof(window.crypto.getRandomValues) != 'undefined';
return (hasCrypto && hasRandomValues) ? _cryptoGuid() : _guid();
};
return {
newGuid: create,
empty: EMPTY
};
})();
// DEMO: Create and show GUID
console.log('1. New Guid: ' + Guid.newGuid());
// DEMO: Show empty GUID
console.log('2. Empty Guid: ' + Guid.empty);
Usage:
Guid.newGuid()
"c6c2d12f-d76b-5739-e551-07e6de5b0807"
Guid.empty
"00000000-0000-0000-0000-000000000000"
The version below is an adaptation of broofa's answer, but updated to include a "true" random function that uses crypto libraries where available, and the Alea() function as a fallback.
Math.log2 = Math.log2 || function(n){ return Math.log(n) / Math.log(2); }
Math.trueRandom = (function() {
var crypt = window.crypto || window.msCrypto;
if (crypt && crypt.getRandomValues) {
// If we have a crypto library, use it
var random = function(min, max) {
var rval = 0;
var range = max - min;
if (range < 2) {
return min;
}
var bits_needed = Math.ceil(Math.log2(range));
if (bits_needed > 53) {
throw new Exception("We cannot generate numbers larger than 53 bits.");
}
var bytes_needed = Math.ceil(bits_needed / 8);
var mask = Math.pow(2, bits_needed) - 1;
// 7776 -> (2^13 = 8192) -1 == 8191 or 0x00001111 11111111
// Create byte array and fill with N random numbers
var byteArray = new Uint8Array(bytes_needed);
crypt.getRandomValues(byteArray);
var p = (bytes_needed - 1) * 8;
for(var i = 0; i < bytes_needed; i++ ) {
rval += byteArray[i] * Math.pow(2, p);
p -= 8;
}
// Use & to apply the mask and reduce the number of recursive lookups
rval = rval & mask;
if (rval >= range) {
// Integer out of acceptable range
return random(min, max);
}
// Return an integer that falls within the range
return min + rval;
}
return function() {
var r = random(0, 1000000000) / 1000000000;
return r;
};
} else {
// From https://web.archive.org/web/20120502223108/http://baagoe.com/en/RandomMusings/javascript/
// Johannes Baagøe <baagoe#baagoe.com>, 2010
function Mash() {
var n = 0xefc8249d;
var mash = function(data) {
data = data.toString();
for (var i = 0; i < data.length; i++) {
n += data.charCodeAt(i);
var h = 0.02519603282416938 * n;
n = h >>> 0;
h -= n;
h *= n;
n = h >>> 0;
h -= n;
n += h * 0x100000000; // 2^32
}
return (n >>> 0) * 2.3283064365386963e-10; // 2^-32
};
mash.version = 'Mash 0.9';
return mash;
}
// From http://baagoe.com/en/RandomMusings/javascript/
function Alea() {
return (function(args) {
// Johannes Baagøe <baagoe#baagoe.com>, 2010
var s0 = 0;
var s1 = 0;
var s2 = 0;
var c = 1;
if (args.length == 0) {
args = [+new Date()];
}
var mash = Mash();
s0 = mash(' ');
s1 = mash(' ');
s2 = mash(' ');
for (var i = 0; i < args.length; i++) {
s0 -= mash(args[i]);
if (s0 < 0) {
s0 += 1;
}
s1 -= mash(args[i]);
if (s1 < 0) {
s1 += 1;
}
s2 -= mash(args[i]);
if (s2 < 0) {
s2 += 1;
}
}
mash = null;
var random = function() {
var t = 2091639 * s0 + c * 2.3283064365386963e-10; // 2^-32
s0 = s1;
s1 = s2;
return s2 = t - (c = t | 0);
};
random.uint32 = function() {
return random() * 0x100000000; // 2^32
};
random.fract53 = function() {
return random() +
(random() * 0x200000 | 0) * 1.1102230246251565e-16; // 2^-53
};
random.version = 'Alea 0.9';
random.args = args;
return random;
}(Array.prototype.slice.call(arguments)));
};
return Alea();
}
}());
Math.guid = function() {
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {
var r = Math.trueRandom() * 16 | 0,
v = c == 'x' ? r : (r & 0x3 | 0x8);
return v.toString(16);
});
};
JavaScript project on GitHub - https://github.com/LiosK/UUID.js
UUID.js The RFC-compliant UUID generator for JavaScript.
See RFC 4122 http://www.ietf.org/rfc/rfc4122.txt.
Features Generates RFC 4122 compliant UUIDs.
Version 4 UUIDs (UUIDs from random numbers) and version 1 UUIDs
(time-based UUIDs) are available.
UUID object allows a variety of access to the UUID including access to
the UUID fields.
Low timestamp resolution of JavaScript is compensated by random
numbers.
// RFC 4122
//
// A UUID is 128 bits long
//
// String representation is five fields of 4, 2, 2, 2, and 6 bytes.
// Fields represented as lowercase, zero-filled, hexadecimal strings, and
// are separated by dash characters
//
// A version 4 UUID is generated by setting all but six bits to randomly
// chosen values
var uuid = [
Math.random().toString(16).slice(2, 10),
Math.random().toString(16).slice(2, 6),
// Set the four most significant bits (bits 12 through 15) of the
// time_hi_and_version field to the 4-bit version number from Section
// 4.1.3
(Math.random() * .0625 /* 0x.1 */ + .25 /* 0x.4 */).toString(16).slice(2, 6),
// Set the two most significant bits (bits 6 and 7) of the
// clock_seq_hi_and_reserved to zero and one, respectively
(Math.random() * .25 /* 0x.4 */ + .5 /* 0x.8 */).toString(16).slice(2, 6),
Math.random().toString(16).slice(2, 14)].join('-');
Added in: v15.6.0, v14.17.0 there is a built-in crypto.randomUUID() function.
import * as crypto from "crypto";
const uuid = crypto.randomUUID();
In the browser, crypto.randomUUID() is currently supported in Chromium 92+ and Firefox 95+.
For those wanting an RFC 4122 version 4 compliant solution with speed considerations (few calls to Math.random()):
var rand = Math.random;
function UUID() {
var nbr, randStr = "";
do {
randStr += (nbr = rand()).toString(16).substr(3, 6);
} while (randStr.length < 30);
return (
randStr.substr(0, 8) + "-" +
randStr.substr(8, 4) + "-4" +
randStr.substr(12, 3) + "-" +
((nbr*4|0)+8).toString(16) + // [89ab]
randStr.substr(15, 3) + "-" +
randStr.substr(18, 12)
);
}
console.log( UUID() );
The above function should have a decent balance between speed and randomness.
I wanted to understand broofa's answer, so I expanded it and added comments:
var uuid = function () {
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(
/[xy]/g,
function (match) {
/*
* Create a random nibble. The two clever bits of this code:
*
* - Bitwise operations will truncate floating point numbers
* - For a bitwise OR of any x, x | 0 = x
*
* So:
*
* Math.random * 16
*
* creates a random floating point number
* between 0 (inclusive) and 16 (exclusive) and
*
* | 0
*
* truncates the floating point number into an integer.
*/
var randomNibble = Math.random() * 16 | 0;
/*
* Resolves the variant field. If the variant field (delineated
* as y in the initial string) is matched, the nibble must
* match the mask (where x is a do-not-care bit):
*
* 10xx
*
* This is achieved by performing the following operations in
* sequence (where x is an intermediate result):
*
* - x & 0x3, which is equivalent to x % 3
* - x | 0x8, which is equivalent to x + 8
*
* This results in a nibble between 8 inclusive and 11 exclusive,
* (or 1000 and 1011 in binary), all of which satisfy the variant
* field mask above.
*/
var nibble = (match == 'y') ?
(randomNibble & 0x3 | 0x8) :
randomNibble;
/*
* Ensure the nibble integer is encoded as base 16 (hexadecimal).
*/
return nibble.toString(16);
}
);
};
ES6 sample
const guid=()=> {
const s4=()=> Math.floor((1 + Math.random()) * 0x10000).toString(16).substring(1);
return `${s4() + s4()}-${s4()}-${s4()}-${s4()}-${s4() + s4() + s4()}`;
}
I adjusted my own UUID/GUID generator with some extras here.
I'm using the following Kybos random number generator to be a bit more cryptographically sound.
Below is my script with the Mash and Kybos methods from baagoe.com excluded.
//UUID/Guid Generator
// use: UUID.create() or UUID.createSequential()
// convenience: UUID.empty, UUID.tryParse(string)
(function(w){
// From http://baagoe.com/en/RandomMusings/javascript/
// Johannes Baagøe <baagoe#baagoe.com>, 2010
//function Mash() {...};
// From http://baagoe.com/en/RandomMusings/javascript/
//function Kybos() {...};
var rnd = Kybos();
//UUID/GUID Implementation from http://frugalcoder.us/post/2012/01/13/javascript-guid-uuid-generator.aspx
var UUID = {
"empty": "00000000-0000-0000-0000-000000000000"
,"parse": function(input) {
var ret = input.toString().trim().toLowerCase().replace(/^[\s\r\n]+|[\{\}]|[\s\r\n]+$/g, "");
if ((/[a-f0-9]{8}\-[a-f0-9]{4}\-[a-f0-9]{4}\-[a-f0-9]{4}\-[a-f0-9]{12}/).test(ret))
return ret;
else
throw new Error("Unable to parse UUID");
}
,"createSequential": function() {
var ret = new Date().valueOf().toString(16).replace("-","")
for (;ret.length < 12; ret = "0" + ret);
ret = ret.substr(ret.length-12,12); //only least significant part
for (;ret.length < 32;ret += Math.floor(rnd() * 0xffffffff).toString(16));
return [ret.substr(0,8), ret.substr(8,4), "4" + ret.substr(12,3), "89AB"[Math.floor(Math.random()*4)] + ret.substr(16,3), ret.substr(20,12)].join("-");
}
,"create": function() {
var ret = "";
for (;ret.length < 32;ret += Math.floor(rnd() * 0xffffffff).toString(16));
return [ret.substr(0,8), ret.substr(8,4), "4" + ret.substr(12,3), "89AB"[Math.floor(Math.random()*4)] + ret.substr(16,3), ret.substr(20,12)].join("-");
}
,"random": function() {
return rnd();
}
,"tryParse": function(input) {
try {
return UUID.parse(input);
} catch(ex) {
return UUID.empty;
}
}
};
UUID["new"] = UUID.create;
w.UUID = w.Guid = UUID;
}(window || this));
The native URL.createObjectURL is generating an UUID. You can take advantage of this.
function uuid() {
const url = URL.createObjectURL(new Blob())
const [id] = url.toString().split('/').reverse()
URL.revokeObjectURL(url)
return id
}
The better way:
function(
a, b // Placeholders
){
for( // Loop :)
b = a = ''; // b - result , a - numeric variable
a++ < 36; //
b += a*51&52 // If "a" is not 9 or 14 or 19 or 24
? // return a random number or 4
(
a^15 // If "a" is not 15,
? // generate a random number from 0 to 15
8^Math.random() *
(a^20 ? 16 : 4) // unless "a" is 20, in which case a random number from 8 to 11,
:
4 // otherwise 4
).toString(16)
:
'-' // In other cases, (if "a" is 9,14,19,24) insert "-"
);
return b
}
Minimized:
function(a,b){for(b=a='';a++<36;b+=a*51&52?(a^15?8^Math.random()*(a^20?16:4):4).toString(16):'-');return b}
The following is simple code that uses crypto.getRandomValues(a) on supported browsers (Internet Explorer 11+, iOS 7+, Firefox 21+, Chrome, and Android Chrome).
It avoids using Math.random(), because that can cause collisions (for example 20 collisions for 4000 generated UUIDs in a real situation by Muxa).
function uuid() {
function randomDigit() {
if (crypto && crypto.getRandomValues) {
var rands = new Uint8Array(1);
crypto.getRandomValues(rands);
return (rands[0] % 16).toString(16);
} else {
return ((Math.random() * 16) | 0).toString(16);
}
}
var crypto = window.crypto || window.msCrypto;
return 'xxxxxxxx-xxxx-4xxx-8xxx-xxxxxxxxxxxx'.replace(/x/g, randomDigit);
}
Notes:
Optimised for code readability, not speed, so it is suitable for, say, a few hundred UUIDs per second. It generates about 10000 uuid() per second in Chromium on my laptop using http://jsbin.com/fuwigo/1 to measure performance.
It only uses 8 for "y" because that simplifies code readability (y is allowed to be 8, 9, A, or B).
If you just need a random 128 bit string in no particular format, you can use:
function uuid() {
return crypto.getRandomValues(new Uint32Array(4)).join('-');
}
Which will return something like 2350143528-4164020887-938913176-2513998651.
I couldn't find any answer that uses a single 16-octet TypedArray and a DataView, so I think the following solution for generating a version 4 UUID per the RFC will stand on its own here:
const uuid4 = () => {
const ho = (n, p) => n.toString(16).padStart(p, 0); /// Return the hexadecimal text representation of number `n`, padded with zeroes to be of length `p`
const data = crypto.getRandomValues(new Uint8Array(16)); /// Fill the buffer with random data
data[6] = (data[6] & 0xf) | 0x40; /// Patch the 6th byte to reflect a version 4 UUID
data[8] = (data[8] & 0x3f) | 0x80; /// Patch the 8th byte to reflect a variant 1 UUID (version 4 UUIDs are)
const view = new DataView(data.buffer); /// Create a view backed by a 16-byte buffer
return `${ho(view.getUint32(0), 8)}-${ho(view.getUint16(4), 4)}-${ho(view.getUint16(6), 4)}-${ho(view.getUint16(8), 4)}-${ho(view.getUint32(10), 8)}${ho(view.getUint16(14), 4)}`; /// Compile the canonical textual form from the array data
};
I prefer it because:
it only relies on functions available to the standard ECMAScript platform, where possible -- which is all but one procedure
it only uses a single buffer, minimizing copying of data, which should in theory yield performance advantages
At the time of writing this, getRandomValues is not something implemented for the crypto object in Node.js. However, it has the equivalent randomBytes function which may be used instead.
Just another more readable variant with just two mutations.
function uuid4()
{
function hex (s, b)
{
return s +
(b >>> 4 ).toString (16) + // high nibble
(b & 0b1111).toString (16); // low nibble
}
let r = crypto.getRandomValues (new Uint8Array (16));
r[6] = r[6] >>> 4 | 0b01000000; // Set type 4: 0100
r[8] = r[8] >>> 3 | 0b10000000; // Set variant: 100
return r.slice ( 0, 4).reduce (hex, '' ) +
r.slice ( 4, 6).reduce (hex, '-') +
r.slice ( 6, 8).reduce (hex, '-') +
r.slice ( 8, 10).reduce (hex, '-') +
r.slice (10, 16).reduce (hex, '-');
}
I have this example formula:
((97000 * ((5.50/100)/12)) / (1 - ((1 + ((5.50/100)/12))**(-1 * 120))))
The problem is that this code is not working correctly in IE11. I have tried this method to replace each ** with Math.pow, but I cannot get it to work correctly:
function detectAndFixTrivialPow(expressionString) {
var pattern = /(\w+)\*\*(\w+)/i;
var fixed = expressionString.replace(pattern, 'Math.pow($1,$2)');
return fixed;
}
var expr = "((97000 * ((5.50/100)/12)) / (1 - ((1 + ((5.50/100)/12))**(-1 * 120))))";
var expr2 = detectAndFixTrivialPow(expr);
console.log(expr);
console.log(expr2); // no change...
Trying this with a regular expression is going to be tough. Instead use a transpiler or at least an ECMAScript parser.
Here is an example how it can be done with the esprima parser. This API produces an AST tree. The code below looks for the ** operator in that tree and collects the offsets where the input string should change. Then these offsets are sorted in descending order to apply them in the right order to the input string.
Note that this code does not attempt to save any parentheses. Those in the input are retained, and an extra pair is added for each of the Math.pow calls.
function convert(input) {
let modifs = [];
function recur(ast) {
if (Object(ast) !== ast) return; // not an object
if (ast.type === "BinaryExpression" && ast.operator == "**") {
modifs.push(
[ast.range[0], 0, "Math.pow("],
[input.indexOf("**", ast.left.range[1]), 2, ","],
[ast.range[1], 0, ")"]
);
}
Object.values(ast).forEach(recur);
}
recur(esprima.parse(expr, { range: true }));
modifs.sort(([a], [b]) => b - a);
let output = [...input];
for (let params of modifs) output.splice(...params);
return output.join("");
}
// Demo
let expr = "((97000 * ((5.50/100)/12)) / (1 - ((1 + ((5.50/100)/12))**(-1 * 120))))"
let result = convert(expr);
console.log(result);
<script src="https://cdn.jsdelivr.net/npm/esprima#4.0.1/dist/esprima.min.js"></script>
I have this following code.
var oldBeforeUnload = window.onbeforeunload;
window.onbeforeunload = function()
{
if(modifiedItems && modifiedItems != null)
{
var modifiedItemsArr = modifiedItems.split(",");
if(window.showModalDialog)
{
window.returnValue = modifiedItemsArr;
}
else
{
if (window.opener && window.opener.setFieldValue)
{
window.opener.setFieldValue(modifiedItemsArr);
}
}
}
return oldBeforeUnload();
};
when I split is run in IE it is throwing an
error : object doesnt support property or method split.
In ff the its exiting without any log.
on alert(modifiedItems) //the output is Ljava.lang.object;#c14d9
Can any one tell why is the split not working or is my modifiedItem wrong.
modifiedItems must be a string in order to use split.
alert(typeof modifiedItems);
var oldBeforeUnload = window.onbeforeunload;
window.onbeforeunload = function()
{
if(modifiedItems && modifiedItems != null)
{
alert(typeof modifiedItems);
var modifiedItemsArr = modifiedItems.split(",");
if(window.showModalDialog)
{
window.returnValue = modifiedItemsArr;
}
else
{
if (window.opener && window.opener.setFieldValue)
{
window.opener.setFieldValue(modifiedItemsArr);
}
}
}
return oldBeforeUnload();
};
variable "modifiedItems" should be a string for split function to work. In your case alert(modifiedItems) should alert the string value.I would suggest you to check "modifiedItems".
split() is a function in string object.
Split is a method that can be call on strings. It would seem as if you are trying to split an object not a string. Below is a correct and incorrect usage:
"a,s,d".split(",") // returns ['a','s','d']
{obj:true}.split(",") // will throw the error you are seeing becuase it is an object
To confirm this you can use the following:
console.log(typeof modifiedItems) // <- will output the vaiable type
modifiedItems should be an object, which you can not split, get the value for what you are trying to split out of modified items. On a different note, you are using the window namespace where it doesn't look like you need to be. Take a look at some of the links below to determine if you really should be using the window object.
Is setting properties on the Window object considered bad practice?
why attach to window [edited]
Use this cross browser method that will make everything work.
This script can be found out for downloading at:
http://blog.stevenlevithan.com/archives/cross-browser-split
It always has worked for me.
/*!
* Cross-Browser Split 1.1.1
* Copyright 2007-2012 Steven Levithan <stevenlevithan.com>
* Available under the MIT License
* ECMAScript compliant, uniform cross-browser split method
*/
/**
* Splits a string into an array of strings using a regex or string separator. Matches of the
* separator are not included in the result array. However, if `separator` is a regex that contains
* capturing groups, backreferences are spliced into the result each time `separator` is matched.
* Fixes browser bugs compared to the native `String.prototype.split` and can be used reliably
* cross-browser.
* #param {String} str String to split.
* #param {RegExp|String} separator Regex or string to use for separating the string.
* #param {Number} [limit] Maximum number of items to include in the result array.
* #returns {Array} Array of substrings.
* #example
*
* // Basic use
* split('a b c d', ' ');
* // -> ['a', 'b', 'c', 'd']
*
* // With limit
* split('a b c d', ' ', 2);
* // -> ['a', 'b']
*
* // Backreferences in result array
* split('..word1 word2..', /([a-z]+)(\d+)/i);
* // -> ['..', 'word', '1', ' ', 'word', '2', '..']
*/
var split;
// Avoid running twice; that would break the `nativeSplit` reference
split = split || function (undef) {
var nativeSplit = String.prototype.split,
compliantExecNpcg = /()??/.exec("")[1] === undef, // NPCG: nonparticipating capturing group
self;
self = function (str, separator, limit) {
// If `separator` is not a regex, use `nativeSplit`
if (Object.prototype.toString.call(separator) !== "[object RegExp]") {
return nativeSplit.call(str, separator, limit);
}
var output = [],
flags = (separator.ignoreCase ? "i" : "") +
(separator.multiline ? "m" : "") +
(separator.extended ? "x" : "") + // Proposed for ES6
(separator.sticky ? "y" : ""), // Firefox 3+
lastLastIndex = 0,
// Make `global` and avoid `lastIndex` issues by working with a copy
separator = new RegExp(separator.source, flags + "g"),
separator2, match, lastIndex, lastLength;
str += ""; // Type-convert
if (!compliantExecNpcg) {
// Doesn't need flags gy, but they don't hurt
separator2 = new RegExp("^" + separator.source + "$(?!\\s)", flags);
}
/* Values for `limit`, per the spec:
* If undefined: 4294967295 // Math.pow(2, 32) - 1
* If 0, Infinity, or NaN: 0
* If positive number: limit = Math.floor(limit); if (limit > 4294967295) limit -= 4294967296;
* If negative number: 4294967296 - Math.floor(Math.abs(limit))
* If other: Type-convert, then use the above rules
*/
limit = limit === undef ?
-1 >>> 0 : // Math.pow(2, 32) - 1
limit >>> 0; // ToUint32(limit)
while (match = separator.exec(str)) {
// `separator.lastIndex` is not reliable cross-browser
lastIndex = match.index + match[0].length;
if (lastIndex > lastLastIndex) {
output.push(str.slice(lastLastIndex, match.index));
// Fix browsers whose `exec` methods don't consistently return `undefined` for
// nonparticipating capturing groups
if (!compliantExecNpcg && match.length > 1) {
match[0].replace(separator2, function () {
for (var i = 1; i < arguments.length - 2; i++) {
if (arguments[i] === undef) {
match[i] = undef;
}
}
});
}
if (match.length > 1 && match.index < str.length) {
Array.prototype.push.apply(output, match.slice(1));
}
lastLength = match[0].length;
lastLastIndex = lastIndex;
if (output.length >= limit) {
break;
}
}
if (separator.lastIndex === match.index) {
separator.lastIndex++; // Avoid an infinite loop
}
}
if (lastLastIndex === str.length) {
if (lastLength || !separator.test("")) {
output.push("");
}
} else {
output.push(str.slice(lastLastIndex));
}
return output.length > limit ? output.slice(0, limit) : output;
};
// For convenience
String.prototype.split = function (separator, limit) {
return self(this, separator, limit);
};
return self;
}();
The JavaScript Math.random() function returns a random value between 0 and 1, automatically seeded based on the current time (similar to Java I believe). However, I don't think there's any way to set you own seed for it.
How can I make a random number generator that I can provide my own seed value for, so that I can have it produce a repeatable sequence of (pseudo)random numbers?
One option is http://davidbau.com/seedrandom which is a seedable RC4-based Math.random() drop-in replacement with nice properties.
If you don't need the seeding capability just use Math.random() and build helper functions around it (eg. randRange(start, end)).
I'm not sure what RNG you're using, but it's best to know and document it so you're aware of its characteristics and limitations.
Like Starkii said, Mersenne Twister is a good PRNG, but it isn't easy to implement. If you want to do it yourself try implementing a LCG - it's very easy, has decent randomness qualities (not as good as Mersenne Twister), and you can use some of the popular constants.
EDIT: consider the great options at this answer for short seedable RNG implementations, including an LCG option.
function RNG(seed) {
// LCG using GCC's constants
this.m = 0x80000000; // 2**31;
this.a = 1103515245;
this.c = 12345;
this.state = seed ? seed : Math.floor(Math.random() * (this.m - 1));
}
RNG.prototype.nextInt = function() {
this.state = (this.a * this.state + this.c) % this.m;
return this.state;
}
RNG.prototype.nextFloat = function() {
// returns in range [0,1]
return this.nextInt() / (this.m - 1);
}
RNG.prototype.nextRange = function(start, end) {
// returns in range [start, end): including start, excluding end
// can't modulu nextInt because of weak randomness in lower bits
var rangeSize = end - start;
var randomUnder1 = this.nextInt() / this.m;
return start + Math.floor(randomUnder1 * rangeSize);
}
RNG.prototype.choice = function(array) {
return array[this.nextRange(0, array.length)];
}
var rng = new RNG(20);
for (var i = 0; i < 10; i++)
console.log(rng.nextRange(10, 50));
var digits = ['0', '1', '2', '3', '4', '5', '6', '7', '8', '9'];
for (var i = 0; i < 10; i++)
console.log(rng.choice(digits));
If you want to be able to specify the seed, you just need to replace the calls to getSeconds() and getMinutes(). You could pass in an int and use half of it mod 60 for the seconds value and the other half modulo 60 to give you the other part.
That being said, this method looks like garbage. Doing proper random number generation is very hard. The obvious problem with this is that the random number seed is based on seconds and minutes. To guess the seed and recreate your stream of random numbers only requires trying 3600 different second and minute combinations. It also means that there are only 3600 different possible seeds. This is correctable, but I'd be suspicious of this RNG from the start.
If you want to use a better RNG, try the Mersenne Twister. It is a well tested and fairly robust RNG with a huge orbit and excellent performance.
EDIT: I really should be correct and refer to this as a Pseudo Random Number Generator or PRNG.
"Anyone who uses arithmetic methods to produce random numbers is in a state of sin."
--- John von Neumann
I use a JavaScript port of the Mersenne Twister:
https://gist.github.com/300494
It allows you to set the seed manually. Also, as mentioned in other answers, the Mersenne Twister is a really good PRNG.
The code you listed kind of looks like a Lehmer RNG. If this is the case, then 2147483647 is the largest 32-bit signed integer, 2147483647 is the largest 32-bit prime, and 48271 is a full-period multiplier that is used to generate the numbers.
If this is true, you could modify RandomNumberGenerator to take in an extra parameter seed, and then set this.seed to seed; but you'd have to be careful to make sure the seed would result in a good distribution of random numbers (Lehmer can be weird like that) -- but most seeds will be fine.
The following is a PRNG that may be fed a custom seed. Calling SeedRandom will return a random generator function. SeedRandom can be called with no arguments in order to seed the returned random function with the current time, or it can be called with either 1 or 2 non-negative inters as arguments in order to seed it with those integers. Due to float point accuracy seeding with only 1 value will only allow the generator to be initiated to one of 2^53 different states.
The returned random generator function takes 1 integer argument named limit, the limit must be in the range 1 to 4294965886, the function will return a number in the range 0 to limit-1.
function SeedRandom(state1,state2){
var mod1=4294967087
var mul1=65539
var mod2=4294965887
var mul2=65537
if(typeof state1!="number"){
state1=+new Date()
}
if(typeof state2!="number"){
state2=state1
}
state1=state1%(mod1-1)+1
state2=state2%(mod2-1)+1
function random(limit){
state1=(state1*mul1)%mod1
state2=(state2*mul2)%mod2
if(state1<limit && state2<limit && state1<mod1%limit && state2<mod2%limit){
return random(limit)
}
return (state1+state2)%limit
}
return random
}
Example use:
var generator1=SeedRandom() //Seed with current time
var randomVariable=generator1(7) //Generate one of the numbers [0,1,2,3,4,5,6]
var generator2=SeedRandom(42) //Seed with a specific seed
var fixedVariable=generator2(7) //First value of this generator will always be
//1 because of the specific seed.
This generator exhibit the following properties:
It has approximately 2^64 different possible inner states.
It has a period of approximately 2^63, plenty more than anyone will ever realistically need in a JavaScript program.
Due to the mod values being primes there is no simple pattern in the output, no matter the chosen limit. This is unlike some simpler PRNGs that exhibit some quite systematic patterns.
It discards some results in order to get a perfect distribution no matter the limit.
It is relatively slow, runs around 10 000 000 times per second on my machine.
Bonus: typescript version
If you program in Typescript, I adapted the Mersenne Twister implementation that was brought in Christoph Henkelmann's answer to this thread as a typescript class:
/**
* copied almost directly from Mersenne Twister implementation found in https://gist.github.com/banksean/300494
* all rights reserved to him.
*/
export class Random {
static N = 624;
static M = 397;
static MATRIX_A = 0x9908b0df;
/* constant vector a */
static UPPER_MASK = 0x80000000;
/* most significant w-r bits */
static LOWER_MASK = 0x7fffffff;
/* least significant r bits */
mt = new Array(Random.N);
/* the array for the state vector */
mti = Random.N + 1;
/* mti==N+1 means mt[N] is not initialized */
constructor(seed:number = null) {
if (seed == null) {
seed = new Date().getTime();
}
this.init_genrand(seed);
}
private init_genrand(s:number) {
this.mt[0] = s >>> 0;
for (this.mti = 1; this.mti < Random.N; this.mti++) {
var s = this.mt[this.mti - 1] ^ (this.mt[this.mti - 1] >>> 30);
this.mt[this.mti] = (((((s & 0xffff0000) >>> 16) * 1812433253) << 16) + (s & 0x0000ffff) * 1812433253)
+ this.mti;
/* See Knuth TAOCP Vol2. 3rd Ed. P.106 for multiplier. */
/* In the previous versions, MSBs of the seed affect */
/* only MSBs of the array mt[]. */
/* 2002/01/09 modified by Makoto Matsumoto */
this.mt[this.mti] >>>= 0;
/* for >32 bit machines */
}
}
/**
* generates a random number on [0,0xffffffff]-interval
* #private
*/
private _nextInt32():number {
var y:number;
var mag01 = new Array(0x0, Random.MATRIX_A);
/* mag01[x] = x * MATRIX_A for x=0,1 */
if (this.mti >= Random.N) { /* generate N words at one time */
var kk:number;
if (this.mti == Random.N + 1) /* if init_genrand() has not been called, */
this.init_genrand(5489);
/* a default initial seed is used */
for (kk = 0; kk < Random.N - Random.M; kk++) {
y = (this.mt[kk] & Random.UPPER_MASK) | (this.mt[kk + 1] & Random.LOWER_MASK);
this.mt[kk] = this.mt[kk + Random.M] ^ (y >>> 1) ^ mag01[y & 0x1];
}
for (; kk < Random.N - 1; kk++) {
y = (this.mt[kk] & Random.UPPER_MASK) | (this.mt[kk + 1] & Random.LOWER_MASK);
this.mt[kk] = this.mt[kk + (Random.M - Random.N)] ^ (y >>> 1) ^ mag01[y & 0x1];
}
y = (this.mt[Random.N - 1] & Random.UPPER_MASK) | (this.mt[0] & Random.LOWER_MASK);
this.mt[Random.N - 1] = this.mt[Random.M - 1] ^ (y >>> 1) ^ mag01[y & 0x1];
this.mti = 0;
}
y = this.mt[this.mti++];
/* Tempering */
y ^= (y >>> 11);
y ^= (y << 7) & 0x9d2c5680;
y ^= (y << 15) & 0xefc60000;
y ^= (y >>> 18);
return y >>> 0;
}
/**
* generates an int32 pseudo random number
* #param range: an optional [from, to] range, if not specified the result will be in range [0,0xffffffff]
* #return {number}
*/
nextInt32(range:[number, number] = null):number {
var result = this._nextInt32();
if (range == null) {
return result;
}
return (result % (range[1] - range[0])) + range[0];
}
/**
* generates a random number on [0,0x7fffffff]-interval
*/
nextInt31():number {
return (this._nextInt32() >>> 1);
}
/**
* generates a random number on [0,1]-real-interval
*/
nextNumber():number {
return this._nextInt32() * (1.0 / 4294967295.0);
}
/**
* generates a random number on [0,1) with 53-bit resolution
*/
nextNumber53():number {
var a = this._nextInt32() >>> 5, b = this._nextInt32() >>> 6;
return (a * 67108864.0 + b) * (1.0 / 9007199254740992.0);
}
}
you can than use it as follows:
var random = new Random(132);
random.nextInt32(); //return a pseudo random int32 number
random.nextInt32([10,20]); //return a pseudo random int in range [10,20]
random.nextNumber(); //return a a pseudo random number in range [0,1]
check the source for more methods.
Here is quite an effective but simple javascript PRNG function that I like to use:
// The seed is the base number that the function works off
// The modulo is the highest number that the function can return
function PRNG(seed, modulo) {
str = `${(2**31-1&Math.imul(48271,seed))/2**31}`
.split('')
.slice(-10)
.join('') % modulo
return str
}
I hope this is what you're looking for.
Thank you, #aaaaaaaaaaaa (Accepted Answer)
I really needed a good non-library solution (easier to embed)
so... i made this class to store the seed and allow a Unity-esque "Next" ... but kept the initial Integer based results
class randS {
constructor(seed=null) {
if(seed!=null) {
this.seed = seed;
} else {
this.seed = Date.now()%4645455524863;
}
this.next = this.SeedRandom(this.seed);
this.last = 0;
}
Init(seed=this.seed) {
if (seed = this.seed) {
this.next = this.SeedRandom(this.seed);
} else {
this.seed=seed;
this.next = this.SeedRandom(this.seed);
}
}
SeedRandom(state1,state2){
var mod1=4294967087;
var mod2=4294965887;
var mul1=65539;
var mul2=65537;
if(typeof state1!="number"){
state1=+new Date();
}
if(typeof state2!="number"){
state2=state1;
}
state1=state1%(mod1-1)+1;
state2=state2%(mod2-1)+1;
function random(limit){
state1=(state1*mul1)%mod1;
state2=(state2*mul2)%mod2;
if(state1<limit && state2<limit && state1<mod1%limit && state2<mod2%limit){
this.last = random;
return random(limit);
}
this.last = (state1+state2)%limit;
return (state1+state2)%limit;
}
this.last = random;
return random;
}
}
And then checked it with these... seems to work well with random (but queryable) seed value (a la Minecraft) and even stored the last value returned (if needed)
var rng = new randS(9005646549);
console.log(rng.next(20)+' '+rng.next(20)+' '+rng.next(20)+' '+rng.next(20)+' '+rng.next(20)+' '+rng.next(20)+' '+rng.next(20));
console.log(rng.next(20) + ' ' + rng.next(20) + ' ' + rng.last);
which should output (for everybody)
6 7 8 14 1 12 6
9 1 1
EDIT: I made the init() work if you ever needed to reseed, or were testing values (this was necessary in my context as well)
Note: This code was originally included in the question above. In the interests of keeping the question short and focused, I've moved it to this Community Wiki answer.
I found this code kicking around and it appears to work fine for getting a random number and then using the seed afterward but I'm not quite sure how the logic works (e.g. where the 2345678901, 48271 & 2147483647 numbers came from).
function nextRandomNumber(){
var hi = this.seed / this.Q;
var lo = this.seed % this.Q;
var test = this.A * lo - this.R * hi;
if(test > 0){
this.seed = test;
} else {
this.seed = test + this.M;
}
return (this.seed * this.oneOverM);
}
function RandomNumberGenerator(){
var d = new Date();
this.seed = 2345678901 + (d.getSeconds() * 0xFFFFFF) + (d.getMinutes() * 0xFFFF);
this.A = 48271;
this.M = 2147483647;
this.Q = this.M / this.A;
this.R = this.M % this.A;
this.oneOverM = 1.0 / this.M;
this.next = nextRandomNumber;
return this;
}
function createRandomNumber(Min, Max){
var rand = new RandomNumberGenerator();
return Math.round((Max-Min) * rand.next() + Min);
}
//Thus I can now do:
var letters = ['a','b','c','d','e','f','g','h','i','j','k','l','m','n','o','p','q','r','s','t','u','v','w','x','y','z'];
var numbers = ['1','2','3','4','5','6','7','8','9','10'];
var colors = ['red','orange','yellow','green','blue','indigo','violet'];
var first = letters[createRandomNumber(0, letters.length)];
var second = numbers[createRandomNumber(0, numbers.length)];
var third = colors[createRandomNumber(0, colors.length)];
alert("Today's show was brought to you by the letter: " + first + ", the number " + second + ", and the color " + third + "!");
/*
If I could pass my own seed into the createRandomNumber(min, max, seed);
function then I could reproduce a random output later if desired.
*/
OK, here's the solution I settled on.
First you create a seed value using the "newseed()" function. Then you pass the seed value to the "srandom()" function. Lastly, the "srandom()" function returns a pseudo random value between 0 and 1.
The crucial bit is that the seed value is stored inside an array. If it were simply an integer or float, the value would get overwritten each time the function were called, since the values of integers, floats, strings and so forth are stored directly in the stack versus just the pointers as in the case of arrays and other objects. Thus, it's possible for the value of the seed to remain persistent.
Finally, it is possible to define the "srandom()" function such that it is a method of the "Math" object, but I'll leave that up to you to figure out. ;)
Good luck!
JavaScript:
// Global variables used for the seeded random functions, below.
var seedobja = 1103515245
var seedobjc = 12345
var seedobjm = 4294967295 //0x100000000
// Creates a new seed for seeded functions such as srandom().
function newseed(seednum)
{
return [seednum]
}
// Works like Math.random(), except you provide your own seed as the first argument.
function srandom(seedobj)
{
seedobj[0] = (seedobj[0] * seedobja + seedobjc) % seedobjm
return seedobj[0] / (seedobjm - 1)
}
// Store some test values in variables.
var my_seed_value = newseed(230951)
var my_random_value_1 = srandom(my_seed_value)
var my_random_value_2 = srandom(my_seed_value)
var my_random_value_3 = srandom(my_seed_value)
// Print the values to console. Replace "WScript.Echo()" with "alert()" if inside a Web browser.
WScript.Echo(my_random_value_1)
WScript.Echo(my_random_value_2)
WScript.Echo(my_random_value_3)
Lua 4 (my personal target environment):
-- Global variables used for the seeded random functions, below.
seedobja = 1103515.245
seedobjc = 12345
seedobjm = 4294967.295 --0x100000000
-- Creates a new seed for seeded functions such as srandom().
function newseed(seednum)
return {seednum}
end
-- Works like random(), except you provide your own seed as the first argument.
function srandom(seedobj)
seedobj[1] = mod(seedobj[1] * seedobja + seedobjc, seedobjm)
return seedobj[1] / (seedobjm - 1)
end
-- Store some test values in variables.
my_seed_value = newseed(230951)
my_random_value_1 = srandom(my_seed_value)
my_random_value_2 = srandom(my_seed_value)
my_random_value_3 = srandom(my_seed_value)
-- Print the values to console.
print(my_random_value_1)
print(my_random_value_2)
print(my_random_value_3)