Mouse events with Raphael.js are triggered by any mouse button - javascript

I am using raphael.js to manipulate images inside a "paper". I have realized that all mouse events (click, mousedown, mouseup, dragstart...) are triggered by any mouse button.
In this JSFiddle there is an example to drag two objects, it is possible to drag them around with left, right or middle mouse buttons
JSFiddle
How can I filter the events depending on which button was clicked? For instance, I would like to drag only with the left mouse button
I have read in another StackOverflow post that it is possible to identify the mouse button with e.which, it will return 1, 2, or 3 depending on the pressed button but I cannot find a way to use this variable to filter the event triggers.
I have found a Bug report about this issue but it is open since 2012. I have tried to use part of the code to filter the mouse button with if(e.which == 1) and then I made a console entry. In this way the console entry only appears when I attempt to make a drag with the left button, it won't appear with the other buttons. I have not found a way to implement the rest of the code
Does anybody know what is g.doc.documentElement or g.doc.body (From the bug report code)?
Thank you in advance for your support
Have a good day

I have found a way to do it, instead of installing raphael using npm install raphael I have downloaded the js file from github and then edited the drag function in the following way:
elproto.drag = function (onmove, onstart, onend, move_scope, start_scope, end_scope) {
function start(e) {
if (e.which == 1) {
(e.originalEvent || e).preventDefault();
var x = e.clientX,
y = e.clientY,
scrollY = g.doc.documentElement.scrollTop || g.doc.body.scrollTop,
scrollX = g.doc.documentElement.scrollLeft || g.doc.body.scrollLeft;
this._drag.id = e.identifier;
if (supportsTouch && e.touches) {
var i = e.touches.length, touch;
while (i--) {
touch = e.touches[i];
this._drag.id = touch.identifier;
if (touch.identifier == this._drag.id) {
x = touch.clientX;
y = touch.clientY;
break;
}
}
}
this._drag.x = x + scrollX;
this._drag.y = y + scrollY;
!drag.length && R.mousemove(dragMove).mouseup(dragUp);
drag.push({el: this, move_scope: move_scope, start_scope: start_scope, end_scope: end_scope});
onstart && eve.on("raphael.drag.start." + this.id, onstart);
onmove && eve.on("raphael.drag.move." + this.id, onmove);
onend && eve.on("raphael.drag.end." + this.id, onend);
eve("raphael.drag.start." + this.id, start_scope || move_scope || this, this._drag.x, this._drag.y, e);
}
}
this._drag = {};
draggable.push({el: this, start: start});
this.mousedown(start);
return this;
};
This works fine, I have to do the same for each mouse event but I think the information would be helpful for someone else.

Related

Using buttons to "simulate" mouse-up, mouse-move, and mouse-down events

Hello
I'm currently working on a project that is very similar to the following codepen that I found a long while ago. It's essential a Tinder-like application;
https://codepen.io/suez/pen/MaeVBy
Within the codepen is the following JavaScript/jQuery:
function pullChange() {
animating = true;
deg = pullDeltaX / 10;
$card.css("transform", "translateX("+ pullDeltaX +"px) rotate("+ deg +"deg)");
var opacity = pullDeltaX / 100;
var rejectOpacity = (opacity >= 0) ? 0 : Math.abs(opacity);
var likeOpacity = (opacity <= 0) ? 0 : opacity;
$cardReject.css("opacity", rejectOpacity);
$cardLike.css("opacity", likeOpacity);
};
$(document).on("mousedown touchstart", ".demo__card:not(.inactive)", function(e) {
if (animating) return;
$card = $(this);
$cardReject = $(".demo__card__choice.m--reject", $card);
$cardLike = $(".demo__card__choice.m--like", $card);
var startX = e.pageX || e.originalEvent.touches[0].pageX;
$(document).on("mousemove touchmove", function(e) {
var x = e.pageX || e.originalEvent.touches[0].pageX;
pullDeltaX = (x - startX);
if (!pullDeltaX) return;
pullChange();
});
$(document).on("mouseup touchend", function() {
$(document).off("mousemove touchmove mouseup touchend");
if (!pullDeltaX) return; // prevents from rapid click events
release();
});
});
What I'm looking to achieve is the implementation of two buttons to "simulate" the mouse dragging. So - if you play with the codepen - you'll see that it's possible to drag the cards left and right. A "like" or "dislike" decision is then made based upon how far left or right it was dragged. Also, if you drag a card too far or too little in one direction, the card will snap to a set point upon release.
I want to give the users an option to click a "Like" or 'Dislike" button instead of dragging. Hitting one of these buttons will then perform the same actions as if the card had been dragged.
Is this simple to do? Can anybody give me any guidance? I've spent a bit of time with this, and can't seem to get it to work, so any help would be greatly appreciated!
Let me know if you need more data or information.
Thanks!
Your question left out the important parts of the code; the pullChange() and release() functions. Since those are the functions that actually control the card moving, you should be able to bind them to a button click with a slight caveat. pullChange() utilizes the DeltaX variable and expects it to be there to tell it how far to move, so you'll need to set this by hand since there won't be a drag event telling it how far.

Disable web page navigation on swipe(back and forward)

On a Windows phone, in IE users can go back and forward by swiping on the screen if the swipe is coming from the edge. This OS level functionality is hampering my webpage's UX.
Is there any js or css which can disable that? Some hack would also do.
A snapshot from windowsphone's website:
Here is the link to the reference page: http://www.windowsphone.com/en-in/how-to/wp8/basics/gestures-swipe-pan-and-stretch
Please note that I still need touchaction enabled for horizontal scrolling.
You Should Try this solution in two way :
1) CSS only fix for Chrome/Firefox
html, body {
overscroll-behavior-x: none;
}
2) JavaScript fix for Safari
if (window.safari) {
history.pushState(null, null, location.href);
window.onpopstate = function(event) {
history.go(1);
};
}
Over time, Safari will implement overscroll-behavior-x and we'll be able to remove the JS hack
Possible duplicate of iOS 7 - is there a way to disable the swipe back and forward functionality in Safari?
Copy and paste this JavaScript:
var xPos = null;
var yPos = null;
window.addEventListener( "touchmove", function ( event ) {
var touch = event.originalEvent.touches[ 0 ];
oldX = xPos;
oldY = yPos;
xPos = touch.pageX;
yPos = touch.pageY;
if ( oldX == null && oldY == null ) {
return false;
}
else {
if ( Math.abs( oldX-xPos ) > Math.abs( oldY-yPos ) ) {
event.preventDefault();
return false;
}
}
} );
If you want it minified, copy and paste this:
var xPos=null;var yPos=null;window.addEventListener("touchmove",function(event){var touch=event.originalEvent.touches[0];oldX=xPos;oldY=yPos;xPos=touch.pageX;yPos=touch.pageY;if(oldX==null && oldY==null){return false;}else{if(Math.abs(oldX-xPos)>Math.abs(oldY-yPos)){event.preventDefault();return false;}}});
How about preventing the default action of the swipe event. Somewhere in your document.ready add (note I've included the document.ready in this example, only the function needs to be added):
$(document).ready(function(){
$(window).on('touchmove',function(e){e.preventDefault();});
});
In this case I believe the event is called 'touchmove'you may need to extend this to also ignore default behavior of touchstart/touchend but I'm not 100% sure.
Check out this Codepen by David Hill.
var elem = document.getElementById("container"); //area we don't want touch drag
var defaultPrevent=function(e){e.preventDefault();}
elem.addEventListener("touchstart", defaultPrevent);
elem.addEventListener("touchmove" , defaultPrevent);
I actually think this is a cool way to build objects too.
This is also a problem for Mac users who have configured swipe-left to navigate backwards. You can't disable this setting, but you can prompt the user to confirm that they intended to navigate away https://developer.mozilla.org/en-US/docs/Web/Events/beforeunload.
*{
-webkit-touch-callout: none;
}
The result is to completely deactivate any touch events

without jquery i need to find out if the mouse is over an element, not determine when it becomes over (in case it doesn't move to trigger onmouseover)

without jquery
basically what I am looking for is the ability to see if the mouse is over a div when a countdown finishes
if the user is over the div then perform action for that div
onmouseover only triggers when the mouse crosses the threshold of the div, if the mouse hasn't moved it wouldn't trigger, so that wouldn't work
I need to determine if the mouse is currently over a div at a specific point in time, if it has moved or not from the starting point
all of my hunting has only found onmousover, and nothing to see if the mouse just happens to be there to begin with
I don't have the javascript skills to determine overall coords of div, then map mouse coords and see if it fits there... which is what I believe I need to do
After reading the second answer (the one with millions of a elements) on this SO question, I've came up with this method works without moving the mouse on page load, without involving millions of elements.
HTML
<div id=t></div>
CSS
#t {
/* for illustrative purposes */
width: 10em;
height: 5em;
background-color: #0af;
}
#t:hover {
border-top-style: hidden;
}
JavaScript
document.addEventListener('click', function () {
var c = window.getComputedStyle(document.getElementById('t')).getPropertyValue('border-top-style');
if (c === 'hidden') {
alert('Mouse in box');
} else {
alert('Mouse not in box');
}
}, false);
As stated earlier, bind to the finish event of your countdown instead of the click event on the document.
You may also use any CSS style that's changed on :hover, I chose border-top-style as it is conspicuous. If you're using a border, choose something else.
Here's a jsFiddle.
set a flag to true onmouseover and to false onmouseleave. when countdown finishes if flag is true then it is over element.
HTML
<div id="div-name">the section of the code i am working with has a countdown timer, when it reaches 0 i need to know if the mouse is over a specific box</div>
<button id="notification" onclick="javascript: letsCountIt(5);">click to start countdown</button>
JS
window.ev = false;
document.getElementById('div-name').onmouseover = function () {
window.ev = true;
console.log(window.ev);
}
document.getElementById('div-name').onmouseout = function () {
window.ev = false;
console.log(window.ev);
}
window.letsCountIt = function (cdtimer) {
cdtimer--;
document.getElementById('notification').innerHTML = cdtimer;
if (cdtimer == 0) {
if (window.ev === true) {
alert('over');
} else {
alert('not over');
}
} else {
setTimeout(function(){letsCountIt(cdtimer);}, 1000);
}
}
Look into document.elementFromPoint . When you pass an x,y to elementFromPoint, it will return whatever element (or <body>, if no other specific element) is at that point. You can easily check if this element is the element you want.
The problem then is finding out what point your mouse is at. How to get the mouse position without events (without moving the mouse)? seems to say - don't. At least use mouseMove to track the cursor. The linked question gives examples of how to do so. (Look to the lower scoring answers, as the higher ones only got points for being snarky.)
Just want to say that, I think jQuery's mouseenter and mouseleave events would make this a lot easier, but if you can't use them, maybe this will help you.
Depending on how your page is laid out, this may not be too difficult. You can get the position of your element using the following. Quoting from another answer
element.offsetLeft and element.offsetTop are the pure javascript
properties for finding an element's position with respect to its
offsetParent; being the nearest parent element with a position of
relative or absolute
So, if your element is positioned relatively to the body, so far so good (We don't need to adjust anything).
Now, if we attach an event to the document mousemove event, we can get the current coordinates of the mouse:
document.addEventListener('mousemove', function (e) {
var x = e.clientX;
var y = e.clientY;
}, false);
Now we just need to determine if the mouse falls within the element. To do that we need the height and width of the element. Quoting from another answer
You should use the .offsetWidth and .offsetHeight properties. Note
they belong to the element, not .style.
For example:
var element = document.getElementById('element');
var height = element.offsetHeight;
var width = element.offsetWidth;
Now we have all the information we need, and just need to determine if the mouse falls within the element. We might use something like this:
var onmove = function(e) {
var minX = element.offsetLeft;
var maxX = minX + element.offsetWidth;
var minY = element.offsetTop;
var maxY = minY + element.offsetHeight;
if(e.clientX >= minX && e.clientX <= maxX)
//good horizontally
if(e.clientY >= minY && e.clientY <= maxY)
//good vertically
}
This code works, but the mouse has to be moved once after page load.
var coords;
var getMouseCoordinates = function (e) {
'use strict';
return {
x: e.clientX,
y: e.clientY
};
};
document.addEventListener('mousemove', function (e) {
coords = getMouseCoordinates(e);
}, false);
document.addEventListener('click', function () {
var divCoords = document.getElementById('t').getBoundingClientRect();
if (coords.x >= divCoords.left && coords.x <= divCoords.right && coords.y >= divCoords.top && coords.y <= divCoords.bottom) {
alert('Mouse in box');
} else {
alert('Mouse not in box');
}
}, false);
You wouldn't bind to the click event of document, but rather the finish event of your countdown.
Here's an example. Try clicking in the output window.
You don't need any coordinates or mouse events, if you know a selector for that element:
if (document.querySelector('#elementSelector:hover')) {
alert('I like it when you touch me!');
}

in gamequery I am trying to move a selected object with mousetracker by clicking on the object, and dragging it

I know I can use mousedown selection for it, but I am wanting the clicked on sprite to follow my mouse, there is a mousetracker function of sorts mentioned in the api; but unfortunately there are no examples of this other than stating that it allows mouse detection.
//add mousedown events for yarnballs.
$(".gQ_sprite").mousedown(function() {
clickedDivId = $(this).attr('id');
if(clickedDivId.charAt(8) == "-")
{
currentClickedDivId = clickedDivId
$(document).mousemove(function(e){
spriteXPosition = e.pageX
spriteYPosition = e.pageY
});
}
});
I have the location of the mouse selected, just not sure how to get the selected sprite to follow it.
any help would be greatly appreciated.
What Mati said is correct: $.gQ.mouseTracker allows you to access the mouse's state outside of an event handler. The example he gives is correct but it can't be used to move a gQ object (sprite, tile-map or group) around because you'r not allowed to use the .css() function for those. Doing so will break collision detection.
If what you want is to move a gQ object you should do this instead :
$('#' + currentClickedDivId).xy($.gQ.mouseTracker.x, $.gQ.mouseTracker.y);
But since this should be done in a periodical callback, the smoothness of the dragging will depend on the refresh rate.
If you want to use event handlers instead you could modify you code to look like this (without using the mouseTracker):
var clickedDiv;
var clickedDivOffset = {x:0, y:0};
$(".gQ_sprite").mousedown(function(e) {
clickedDiv = $(this);
clickedDivOffset = {
x: e.pageX - clickedDiv.x() - $().playground().offset().left,
y: e.pageY - clickedDiv.y() - $().playground().offset().top
};
});
$(".gQ_sprite").mouseup(function() {
clickedDiv = false;
});
$().playground().mousemove(function(e) {
if(clickedDiv){
clickedDiv.xy(
e.pageX - clickedDivOffset.x,
e.pageY - clickedDivOffset.y,
);
}
});
This will implement a drag-n-drop effect. If you want the clicked element to stick to the mouse you will have to slightly adapt the code but the basics will remain the same.
According to the documentation:
If the mouse tracker is enabled you can check the state of the mouse at anytime by looking into the object $.gQ.mouseTracker where x and y contain the position of the mouse and 1, 2 and 3 a boolean value where true means that the first, second or thrid button is pressed.
Observe the output of:
$("#playground").playground({ refreshRate: 60, mouseTracker: true });
$.playground().startGame();
$.playground().registerCallback(function(){
console.log( $.gQ.mouseTracker );
}, 1000);
To make those divs actually follow the cursor, you have to use .css()
$('#' + currentClickedDivId).css({
top: $.gQ.mouseTracker.y + 'px',
left: $.gQ.mouseTracker.x + 'px'
});

HTML5 dragleave fired when hovering a child element

The problem I'm having is that the dragleave event of an element is fired when hovering a child element of that element. Also, dragenter is not fired when hovering back the parent element again.
I made a simplified fiddle: http://jsfiddle.net/pimvdb/HU6Mk/1/.
HTML:
<div id="drag" draggable="true">drag me</div>
<hr>
<div id="drop">
drop here
<p>child</p>
parent
</div>
with the following JavaScript:
$('#drop').bind({
dragenter: function() {
$(this).addClass('red');
},
dragleave: function() {
$(this).removeClass('red');
}
});
$('#drag').bind({
dragstart: function(e) {
e.allowedEffect = "copy";
e.setData("text/plain", "test");
}
});
What it is supposed to do is notifying the user by making the drop div red when dragging something there. This works, but if you drag into the p child, the dragleave is fired and the div isn't red anymore. Moving back to the drop div also doesn't make it red again. It's necessary to move completely out of the drop div and drag back into it again to make it red.
Is it possible to prevent dragleave from firing when dragging into a child element?
2017 Update: TL;DR, Look up CSS pointer-events: none; as described in #H.D.'s answer below that works in modern browsers and IE11.
You just need to keep a reference counter, increment it when you get a dragenter, decrement when you get a dragleave. When the counter is at 0 - remove the class.
var counter = 0;
$('#drop').bind({
dragenter: function(ev) {
ev.preventDefault(); // needed for IE
counter++;
$(this).addClass('red');
},
dragleave: function() {
counter--;
if (counter === 0) {
$(this).removeClass('red');
}
}
});
Note: In the drop event, reset counter to zero, and clear the added class.
You can run it here
Is it possible to prevent dragleave from firing when dragging into a child element?
Yes.
#drop * {pointer-events: none;}
That CSS seem to be enough for Chrome.
While using it with Firefox, the #drop shouldn't have text nodes directly (else there's a strange issue where a element "leave it to itself"), so I suggest to leave it with only one element (e.g., use a div inside #drop to put everything inside)
Here's a jsfiddle solving the original question (broken) example.
I've also made a simplified version forked from the #Theodore Brown example, but based only in this CSS.
Not all browsers have this CSS implemented, though:
http://caniuse.com/pointer-events
Seeing the Facebook source code I could find this pointer-events: none; several times, however it's probably used together with graceful degradation fallbacks. At least it's so simple and solves the problem for a lot of environments.
It has been quite some time after this question is asked and a lot of solutions (including ugly hacks) are provided.
I managed to fix the same problem I had recently thanks to the answer in this answer and thought it may be helpful to someone who comes through to this page.
The whole idea is to store the evenet.target in ondrageenter everytime it is called on any of the parent or child elements. Then in ondragleave check if the current target (event.target) is equal to the object you stored in ondragenter.
The only case these two are matched is when your drag is leaving the browser window.
The reason that this works fine is when the mouse leaves an element (say el1) and enters another element (say el2), first the el2.ondragenter is called and then el1.ondragleave. Only when the drag is leaving/entering the browser window, event.target will be '' in both el2.ondragenter and el1.ondragleave.
Here is my working sample. I have tested it on IE9+, Chrome, Firefox and Safari.
(function() {
var bodyEl = document.body;
var flupDiv = document.getElementById('file-drop-area');
flupDiv.onclick = function(event){
console.log('HEy! some one clicked me!');
};
var enterTarget = null;
document.ondragenter = function(event) {
console.log('on drag enter: ' + event.target.id);
enterTarget = event.target;
event.stopPropagation();
event.preventDefault();
flupDiv.className = 'flup-drag-on-top';
return false;
};
document.ondragleave = function(event) {
console.log('on drag leave: currentTarget: ' + event.target.id + ', old target: ' + enterTarget.id);
//Only if the two target are equal it means the drag has left the window
if (enterTarget == event.target){
event.stopPropagation();
event.preventDefault();
flupDiv.className = 'flup-no-drag';
}
};
document.ondrop = function(event) {
console.log('on drop: ' + event.target.id);
event.stopPropagation();
event.preventDefault();
flupDiv.className = 'flup-no-drag';
return false;
};
})();
And here is a simple html page:
<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8">
<title>Multiple File Uploader</title>
<link rel="stylesheet" href="my.css" />
</head>
<body id="bodyDiv">
<div id="cntnr" class="flup-container">
<div id="file-drop-area" class="flup-no-drag">blah blah</div>
</div>
<script src="my.js"></script>
</body>
</html>
With proper styling what I have done is to make the inner div (#file-drop-area) much bigger whenever a file is dragged into the screen so that the user can easily drop the files into the proper place.
Here, the simplest Cross-Browser solution (seriously):
jsfiddle <-- try dragging some file inside the box
You can do something like that:
var dropZone= document.getElementById('box');
var dropMask = document.getElementById('drop-mask');
dropZone.addEventListener('dragover', drag_over, false);
dropMask.addEventListener('dragleave', drag_leave, false);
dropMask.addEventListener('drop', drag_drop, false);
In a few words, you create a "mask" inside the dropzone, with width & height inherited, position absolute, that will just show when the dragover starts.
So, after showing that mask, you can do the trick by attaching the others dragleave & drop events on it.
After leaving or dropping, you just hide the mask again.
Simple and without complications.
(Obs.: Greg Pettit advice -- You must be sure that the mask hover the entire box, including the border)
This fairly simple solution is working for me so far, assuming your event is attached to each drag element individually.
if (evt.currentTarget.contains(evt.relatedTarget)) {
return;
}
The "right" way to solve this issue is to disable pointer events on child elements of the drop target (as in #H.D.'s answer). Here's a jsFiddle I created which demonstrates this technique. Unfortunately, this doesn't work in versions of Internet Explorer prior to IE11, since they didn't support pointer events.
Luckily, I was able to come up with a workaround which does work in old versions of IE. Basically, it involves identifying and ignoring dragleave events which occur when dragging over child elements. Because the dragenter event is fired on child nodes before the dragleave event on the parent, separate event listeners can be added to each child node which add or remove an "ignore-drag-leave" class from the drop target. Then the drop target's dragleave event listener can simply ignore calls which occur when this class exists. Here's a jsFiddle demonstrating this workaround. It is tested and working in Chrome, Firefox, and IE8+.
Update:
I created a jsFiddle demonstrating a combined solution using feature detection, where pointer events are used if supported (currently Chrome, Firefox, and IE11), and the browser falls back to adding events to child nodes if pointer event support isn't available (IE8-10).
if you are using HTML5, you can get the parent's clientRect:
let rect = document.getElementById("drag").getBoundingClientRect();
Then in the parent.dragleave():
dragleave(e) {
if(e.clientY < rect.top || e.clientY >= rect.bottom || e.clientX < rect.left || e.clientX >= rect.right) {
//real leave
}
}
here is a jsfiddle
A very simple solution is to use the pointer-events CSS property. Just set its value to none upon dragstart on every child element. These elements won't trigger mouse-related events anymore, so they won't catch the mouse over them and thus won't trigger the dragleave on the parent.
Don't forget to set this property back to auto when finishing the drag ;)
A simple solution is to add the css rule pointer-events: none to the child component to prevent the trigger of ondragleave. See example:
function enter(event) {
document.querySelector('div').style.border = '1px dashed blue';
}
function leave(event) {
document.querySelector('div').style.border = '';
}
div {
border: 1px dashed silver;
padding: 16px;
margin: 8px;
}
article {
border: 1px solid silver;
padding: 8px;
margin: 8px;
}
p {
pointer-events: none;
background: whitesmoke;
}
<article draggable="true">drag me</article>
<div ondragenter="enter(event)" ondragleave="leave(event)">
drop here
<p>child not triggering dragleave</p>
</div>
The problem is that the dragleave event is being fired when the mouse goes in front of the child element.
I've tried various methods of checking to see if the e.target element is the same as the this element, but couldn't get any improvement.
The way I fixed this problem was a bit of a hack, but works 100%.
dragleave: function(e) {
// Get the location on screen of the element.
var rect = this.getBoundingClientRect();
// Check the mouseEvent coordinates are outside of the rectangle
if(e.x > rect.left + rect.width || e.x < rect.left
|| e.y > rect.top + rect.height || e.y < rect.top) {
$(this).removeClass('red');
}
}
Very simple solution:
parent.addEventListener('dragleave', function(evt) {
if (!parent.contains(evt.relatedTarget)) {
// Here it is only dragleave on the parent
}
}
I was having the same issue and tried to use pk7s solution. It worked but it could be done a little bit better without any extra dom elements.
Basicly the idea is same - add an extra unvisible overlay over droppable area. Only lets do this without any extra dom elements. Here is the part were CSS pseudo-elements come to play.
Javascript
var dragOver = function (e) {
e.preventDefault();
this.classList.add('overlay');
};
var dragLeave = function (e) {
this.classList.remove('overlay');
};
var dragDrop = function (e) {
this.classList.remove('overlay');
window.alert('Dropped');
};
var dropArea = document.getElementById('box');
dropArea.addEventListener('dragover', dragOver, false);
dropArea.addEventListener('dragleave', dragLeave, false);
dropArea.addEventListener('drop', dragDrop, false);
CSS
This after rule will create a fully covered overlay for droppable area.
#box.overlay:after {
content:'';
position: absolute;
top: 0;
left: 0;
bottom: 0;
right: 0;
z-index: 1;
}
Here is the full solution: http://jsfiddle.net/F6GDq/8/
I hope it helps anyone with the same problem.
You can fix it in Firefox with a little inspiration from the jQuery source code:
dragleave: function(e) {
var related = e.relatedTarget,
inside = false;
if (related !== this) {
if (related) {
inside = jQuery.contains(this, related);
}
if (!inside) {
$(this).removeClass('red');
}
}
}
Unfortunately it doesn't work in Chrome because relatedTarget appears not to exist on dragleave events, and I assume you're working in Chrome because your example did't work in Firefox. Here's a version with the above code implemented.
And here it goes, a solution for Chrome:
.bind('dragleave', function(event) {
var rect = this.getBoundingClientRect();
var getXY = function getCursorPosition(event) {
var x, y;
if (typeof event.clientX === 'undefined') {
// try touch screen
x = event.pageX + document.documentElement.scrollLeft;
y = event.pageY + document.documentElement.scrollTop;
} else {
x = event.clientX + document.body.scrollLeft + document.documentElement.scrollLeft;
y = event.clientY + document.body.scrollTop + document.documentElement.scrollTop;
}
return { x: x, y : y };
};
var e = getXY(event.originalEvent);
// Check the mouseEvent coordinates are outside of the rectangle
if (e.x > rect.left + rect.width - 1 || e.x < rect.left || e.y > rect.top + rect.height - 1 || e.y < rect.top) {
console.log('Drag is really out of area!');
}
})
Here's another solution using document.elementFromPoint:
dragleave: function(event) {
var event = event.originalEvent || event;
var newElement = document.elementFromPoint(event.pageX, event.pageY);
if (!this.contains(newElement)) {
$(this).removeClass('red');
}
}
Hope this works, here's a fiddle.
An alternate working solution, a little simpler.
//Note: Due to a bug with Chrome the 'dragleave' event is fired when hovering the dropzone, then
// we must check the mouse coordinates to be sure that the event was fired only when
// leaving the window.
//Facts:
// - [Firefox/IE] e.originalEvent.clientX < 0 when the mouse is outside the window
// - [Firefox/IE] e.originalEvent.clientY < 0 when the mouse is outside the window
// - [Chrome/Opera] e.originalEvent.clientX == 0 when the mouse is outside the window
// - [Chrome/Opera] e.originalEvent.clientY == 0 when the mouse is outside the window
// - [Opera(12.14)] e.originalEvent.clientX and e.originalEvent.clientY never get
// zeroed if the mouse leaves the windows too quickly.
if (e.originalEvent.clientX <= 0 || e.originalEvent.clientY <= 0) {
I know this is a old question but wanted to add my preference. I deal with this by adding class triggered css :after element at a higher z-index then your content. This will filter out all the garbage.
.droppable{
position: relative;
z-index: 500;
}
.droppable.drag-over:after{
content: "";
display:block;
position:absolute;
left:0;
right:0;
top:0;
bottom:0;
z-index: 600;
}
Then just add the drag-over class on your first dragenter event and none of the child elements trigger the event any longer.
dragEnter(event){
dropElement.classList.add('drag-over');
}
dragLeave(event){
dropElement.classList.remove('drag-over');
}
Not sure if this cross browser, but I tested in Chrome and it solves my problem:
I want to drag and drop a file over entire page, but my dragleave is fired when i drag over child element. My fix was to look at the x and y of mouse:
i have a div that overlays my entire page, when the page loads i hide it.
when you drag over document i show it, and when you drop on the parent it handles it, and when you leave the parent i check x and y.
$('#draganddrop-wrapper').hide();
$(document).bind('dragenter', function(event) {
$('#draganddrop-wrapper').fadeIn(500);
return false;
});
$("#draganddrop-wrapper").bind('dragover', function(event) {
return false;
}).bind('dragleave', function(event) {
if( window.event.pageX == 0 || window.event.pageY == 0 ) {
$(this).fadeOut(500);
return false;
}
}).bind('drop', function(event) {
handleDrop(event);
$(this).fadeOut(500);
return false;
});
I've stumbled into the same problem and here's my solution - which I think is much easier then above. I'm not sure if it's crossbrowser (might depend on even bubbling order)
I'll use jQuery for simplicity, but solution should be framework independent.
The event bubbles to parent either way so given:
<div class="parent">Parent <span>Child</span></div>
We attach events
el = $('.parent')
setHover = function(){ el.addClass('hovered') }
onEnter = function(){ setTimeout(setHover, 1) }
onLeave = function(){ el.removeClass('hovered') }
$('.parent').bind('dragenter', onEnter).bind('dragleave', onLeave)
And that's about it. :) it works because even though onEnter on child fires before onLeave on parent, we delay it slightly reversing the order, so class is removed first then reaplied after a milisecond.
I've written a little library called Dragster to handle this exact issue, works everywhere except silently doing nothing in IE (which doesn't support DOM Event Constructors, but it'd be pretty easy to write something similar using jQuery's custom events)
Just check if the dragged over element is a child, if it is, then don't remove your 'dragover' style class. Pretty simple and works for me:
$yourElement.on('dragleave dragend drop', function(e) {
if(!$yourElement.has(e.target).length){
$yourElement.removeClass('is-dragover');
}
})
I wrote a drag-and-drop module called drip-drop that fixes this weirdo behavior, among others. If you're looking for a good low-level drag-and-drop module you can use as the basis for anything (file upload, in-app drag-and-drop, dragging from or to external sources), you should check this module out:
https://github.com/fresheneesz/drip-drop
This is how you would do what you're trying to do in drip-drop:
$('#drop').each(function(node) {
dripDrop.drop(node, {
enter: function() {
$(node).addClass('red')
},
leave: function() {
$(node).removeClass('red')
}
})
})
$('#drag').each(function(node) {
dripDrop.drag(node, {
start: function(setData) {
setData("text", "test") // if you're gonna do text, just do 'text' so its compatible with IE's awful and restrictive API
return "copy"
},
leave: function() {
$(node).removeClass('red')
}
})
})
To do this without a library, the counter technique is what I used in drip-drop, tho the highest rated answer misses important steps that will cause things to break for everything except the first drop. Here's how to do it properly:
var counter = 0;
$('#drop').bind({
dragenter: function(ev) {
ev.preventDefault()
counter++
if(counter === 1) {
$(this).addClass('red')
}
},
dragleave: function() {
counter--
if (counter === 0) {
$(this).removeClass('red');
}
},
drop: function() {
counter = 0 // reset because a dragleave won't happen in this case
}
});
I found a simple solution to this problem so sharing it. It works well in my case.
jsfiddle try it.
You can actually achieve this only via the dragenter event and you don't even need to register a dragleave. All you need is to have a no-drop area around your dropzones and that's it.
You can also have nested dropzones and this works perfectly. Check this as well nested dropzones.
$('.dropzone').on("dragenter", function(e) {
e.preventDefault();
e.stopPropagation();
$(this).addClass("over");
$(".over").not(this).removeClass("over"); // in case of multiple dropzones
});
$('.dropzone-leave').on("dragenter", function(e) {
e.preventDefault();
e.stopPropagation();
$(".over").removeClass("over");
});
// UPDATE
// As mar10 pointed out, the "Esc" key needs to be managed,
// the easiest approach is to detect the key and clean things up.
$(document).on('keyup', function(e){
if (e.key === "Escape") {
$(".over").removeClass("over");
}
});
After spending so many hours I got that suggestion working exactly as intended. I wanted to provide a cue only when files were dragged over, and document dragover, dragleave was causing painful flickers on Chrome browser.
This is how I solved it, also throwing in proper cues for user.
$(document).on('dragstart dragenter dragover', function(event) {
// Only file drag-n-drops allowed, http://jsfiddle.net/guYWx/16/
if ($.inArray('Files', event.originalEvent.dataTransfer.types) > -1) {
// Needed to allow effectAllowed, dropEffect to take effect
event.stopPropagation();
// Needed to allow effectAllowed, dropEffect to take effect
event.preventDefault();
$('.dropzone').addClass('dropzone-hilight').show(); // Hilight the drop zone
dropZoneVisible= true;
// http://www.html5rocks.com/en/tutorials/dnd/basics/
// http://api.jquery.com/category/events/event-object/
event.originalEvent.dataTransfer.effectAllowed= 'none';
event.originalEvent.dataTransfer.dropEffect= 'none';
// .dropzone .message
if($(event.target).hasClass('dropzone') || $(event.target).hasClass('message')) {
event.originalEvent.dataTransfer.effectAllowed= 'copyMove';
event.originalEvent.dataTransfer.dropEffect= 'move';
}
}
}).on('drop dragleave dragend', function (event) {
dropZoneVisible= false;
clearTimeout(dropZoneTimer);
dropZoneTimer= setTimeout( function(){
if( !dropZoneVisible ) {
$('.dropzone').hide().removeClass('dropzone-hilight');
}
}, dropZoneHideDelay); // dropZoneHideDelay= 70, but anything above 50 is better
});
"dragleave" event is fired when mouse pointer exits the dragging area of the target container.
Which makes a lot of sense as in many cases only the parent may be droppable and not the descendants.
I think event.stopPropogation() should have handled this case but seems like it doesn't do the trick.
Above mentioned some solutions do seem to work for most of the cases, but fails in case of those children which does not support dragenter / dragleave events, such as iframe.
1 workaround is to check the event.relatedTarget and verify if it resides inside the container then ignore the dragleave event as I have done here:
function isAncestor(node, target) {
if (node === target) return false;
while(node.parentNode) {
if (node.parentNode === target)
return true;
node=node.parentNode;
}
return false;
}
var container = document.getElementById("dropbox");
container.addEventListener("dragenter", function() {
container.classList.add("dragging");
});
container.addEventListener("dragleave", function(e) {
if (!isAncestor(e.relatedTarget, container))
container.classList.remove("dragging");
});
You can find a working fiddle here!
Solved ..!
Declare any array for ex:
targetCollection : any[]
dragenter: function(e) {
this.targetCollection.push(e.target); // For each dragEnter we are adding the target to targetCollection
$(this).addClass('red');
},
dragleave: function() {
this.targetCollection.pop(); // For every dragLeave we will pop the previous target from targetCollection
if(this.targetCollection.length == 0) // When the collection will get empty we will remove class red
$(this).removeClass('red');
}
No need to worry about child elements.
You can use a timeout with a transitioning flag and listen on the top element. dragenter / dragleave from child events will bubble up to the container.
Since dragenter on the child element fires before dragleave of the container, we will set the flag show as transitioning for 1ms... the dragleave listener will check for the flag before the 1ms is up.
The flag will be true only during transitions to child elements, and will not be true when transitioning to a parent element (of the container)
var $el = $('#drop-container'),
transitioning = false;
$el.on('dragenter', function(e) {
// temporarily set the transitioning flag for 1 ms
transitioning = true;
setTimeout(function() {
transitioning = false;
}, 1);
$el.toggleClass('dragging', true);
e.preventDefault();
e.stopPropagation();
});
// dragleave fires immediately after dragenter, before 1ms timeout
$el.on('dragleave', function(e) {
// check for transitioning flag to determine if were transitioning to a child element
// if not transitioning, we are leaving the container element
if (transitioning === false) {
$el.toggleClass('dragging', false);
}
e.preventDefault();
e.stopPropagation();
});
// to allow drop event listener to work
$el.on('dragover', function(e) {
e.preventDefault();
e.stopPropagation();
});
$el.on('drop', function(e) {
alert("drop!");
});
jsfiddle: http://jsfiddle.net/ilovett/U7mJj/
I had a similar problem — my code for hiding the dropzone on dragleave event for body was fired contatantly when hovering child elements making the dropzone flicker in Google Chrome.
I was able to solve this by scheduling the function for hiding dropzone instead of calling it right away. Then, if another dragover or dragleave is fired, the scheduled function call is cancelled.
body.addEventListener('dragover', function() {
clearTimeout(body_dragleave_timeout);
show_dropzone();
}, false);
body.addEventListener('dragleave', function() {
clearTimeout(body_dragleave_timeout);
body_dragleave_timeout = setTimeout(show_upload_form, 100);
}, false);
dropzone.addEventListener('dragover', function(event) {
event.preventDefault();
dropzone.addClass("hover");
}, false);
dropzone.addEventListener('dragleave', function(event) {
dropzone.removeClass("hover");
}, false);
I struggeled a LOT with this, even after reading through all of these answers, and thought I may share my solution with you, because I figured it may be one of the simpler approaches, somewhat different though. My thought was of simply omitting the dragleave event listener completely, and coding the dragleave behaviour with each new dragenter event fired, while making sure that dragenter events won't be fired unnecessarily.
In my example below, I have a table, where I want to be able to exchange table row contents with each other via drag & drop API. On dragenter, a CSS class shall be added to the row element into which you're currently dragging your element, to highlight it, and on dragleave, this class shall be removed.
Example:
Very basic HTML table:
<table>
<tr>
<td draggable="true" class="table-cell">Hello</td>
</tr>
<tr>
<td draggable="true" clas="table-cell">There</td>
</tr>
</table>
And the dragenter event handler function, added onto each table cell (aside dragstart, dragover, drop, and dragend handlers, which are not specific to this question, so not copied here):
/*##############################################################################
## Dragenter Handler ##
##############################################################################*/
// When dragging over the text node of a table cell (the text in a table cell),
// while previously being over the table cell element, the dragleave event gets
// fired, which stops the highlighting of the currently dragged cell. To avoid
// this problem and any coding around to fight it, everything has been
// programmed with the dragenter event handler only; no more dragleave needed
// For the dragenter event, e.target corresponds to the element into which the
// drag enters. This fact has been used to program the code as follows:
var previousRow = null;
function handleDragEnter(e) {
// Assure that dragenter code is only executed when entering an element (and
// for example not when entering a text node)
if (e.target.nodeType === 1) {
// Get the currently entered row
let currentRow = this.closest('tr');
// Check if the currently entered row is different from the row entered via
// the last drag
if (previousRow !== null) {
if (currentRow !== previousRow) {
// If so, remove the class responsible for highlighting it via CSS from
// it
previousRow.className = "";
}
}
// Each time an HTML element is entered, add the class responsible for
// highlighting it via CSS onto its containing row (or onto itself, if row)
currentRow.className = "ready-for-drop";
// To know which row has been the last one entered when this function will
// be called again, assign the previousRow variable of the global scope onto
// the currentRow from this function run
previousRow = currentRow;
}
}
Very basic comments left in code, such that this code suits for beginners too. Hope this will help you out! Note that you will of course need to add all the event listeners I mentioned above onto each table cell for this to work.
Here is another approach based on the timing of events.
The dragenter event dispatched from the child element can be captured by the parent element and it always occurs before the dragleave. The timing between these two events is really short, shorter than any possible human mouse action. So, the idea is to memorize the time when a dragenter happens and filter dragleave events that occurs "not too quickly" after ...
This short example works on Chrome and Firefox:
var node = document.getElementById('someNodeId'),
on = function(elem, evt, fn) { elem.addEventListener(evt, fn, false) },
time = 0;
on(node, 'dragenter', function(e) {
e.preventDefault();
time = (new Date).getTime();
// Drag start
})
on(node, 'dragleave', function(e) {
e.preventDefault();
if ((new Date).getTime() - time > 5) {
// Drag end
}
})

Categories

Resources