Develop Reference

Only one alert for multiple execution in Ajax

I am working rails application.i need to get status of the each selected device.I am able to achieve this but after executing i am putting alert "Successfully created execution record".For every mac selection it is showing alert message.I need to give one alert in end of execution.I am calling display_result in call_endpoint method.Since it is an Ajax call,it is giving alert for every execution.i don't how to limit to single alert for this.
function display_result() {
$('#http_status').html("");
$('#http_status').append(result["response"].status);
if (result["response"].status == "404") {
console.log("HTTP 404");
$('#response_div').addClass("bs-callout-warning");
} else if (result["response"].status == "520") {
console.log("HTTP 502");
$('#response_div').addClass("bs-callout-danger");
} else {
console.log("HTTP 200");
$('#response_div').addClass("bs-callout-success");
if (result["response"].status == "200") {
// $('.loader').show();
$('#cover-spin').show();
$.ajax({
method: "GET",
dataType: "text",
url: "create_execution",
data: {
http_status: result["response"].status,
mac_address: mac,
},
success: function (execution_record_id) {
$('#cover-spin').hide();
alert('Successfully created execution record");
}
});
}
function call_endpoint() {
var values = new Array();
webpa = $('#Device-PA').is(":visible");
rpil = $('#Device-SN').is(":visible");
groupselect = $('#Group-Select').is(":visible");
parameter_name = $('#tr_object').val();
if (webpa) {
$.each($("input[name='checkBox[]']:checked").closest("td").next("td"), function () {
values.push($(this).text().trim())
});
m = values.length
} else {
$.each($("input[name='checkBox[]']:checked").closest("td").next("td"), function () {
values.push($(this).text().trim())
});
m = values.length
}
serialnumber = $('#pa_serialnumber').val();
oid = $('#sn_serialnumber').val();
protocol = {
pa: pa,
sn: sn,
}
if (pa) {
for (var i = 0; i < m; i++) {
(function () {
var macAdd = values[i];
$.ajax({
method: "GET",
url: "get_object",
dataType: "json",
data: {
parameter: parameter_name,
mac: macAdd,
protocol: protocol,
serialnumber: serialnumber,
},
success: function (result) {
console.log(result);
NProgress.done();
console.log("result for webpa");
display_result();
},
statusCode: {
404: function () {
console.log("Call failed");
}
}
});
})();
}
}

Below is changed code..
Copy below code as it is.
function display_result(total,current) {
$('#http_status').html("");
$('#http_status').append(result["response"].status);
if (result["response"].status == "404") {
console.log("HTTP 404");
$('#response_div').addClass("bs-callout-warning");
} else if (result["response"].status == "520") {
console.log("HTTP 502");
$('#response_div').addClass("bs-callout-danger");
} else {
console.log("HTTP 200");
$('#response_div').addClass("bs-callout-success");
if (result["response"].status == "200") {
// $('.loader').show();
$('#cover-spin').show();
$.ajax({
method: "GET",
dataType: "text",
url: "create_execution",
data: {
http_status: result["response"].status,
mac_address: mac,
},
success: function (execution_record_id) {
$('#cover-spin').hide();
if(total == current)
{
alert('Successfully created execution record");
}
}
});
}
}
}
function call_endpoint() {
var values = new Array();
webpa = $('#Device-PA').is(":visible");
rpil = $('#Device-SN').is(":visible");
groupselect = $('#Group-Select').is(":visible");
parameter_name = $('#tr_object').val();
if (webpa) {
$.each($("input[name='checkBox[]']:checked").closest("td").next("td"), function () {
values.push($(this).text().trim())
});
m = values.length
} else {
$.each($("input[name='checkBox[]']:checked").closest("td").next("td"), function () {
values.push($(this).text().trim())
});
m = values.length
}
serialnumber = $('#pa_serialnumber').val();
oid = $('#sn_serialnumber').val();
protocol = {
pa: pa,
sn: sn,
}
if (pa) {
for (var i = 1; i <= m; i++) {
(function () {
var macAdd = values[i];
$.ajax({
method: "GET",
url: "get_object",
dataType: "json",
data: {
parameter: parameter_name,
mac: macAdd,
protocol: protocol,
serialnumber: serialnumber,
},
success: function (result) {
console.log(result);
NProgress.done();
console.log("result for webpa");
display_result(m,i);
},
statusCode: {
404: function () {
console.log("Call failed");
}
}
});
})();
}
}
}

result and mac is not defined in display_result function. result appears intended to be the resulting value of jQuery promise object returned from $.ajax(). Am not certain what mac is indented to be.
You can substitute $.when() and $.map() for for loop, return a jQuery promise object from call_endpoint(), include error handling, chain .then() to call_endpoint() call to execute alert() once.
function call_endpoint() {
return $.when.apply($, $.map(values, function(macAdd) {
return $.ajax().then(display_result)
}))
}
callEnpoint()
.then(function() {
alert('Successfully created execution record');
}, function(jqxhr, textStatus, errorThrown) {
console.error(errorThrown)
});
function display_result(reuslt) {
..
if (if (result["response"].status == "200")) {
return $.ajax() // remove `alert()` from `success`
}
return;
}

jQuery Execute function after asynchronous data load

I have created a jQuery function extending its own object $. This function translate those elements attached to the element this:
$.fn.extend({
translate: function(sourceLang, targetLang) {
if($(this).text().trim().length < 1 || !isNaN(parseInt($(this).text().trim())) || sourceLang == targetLang)
return;
let $function = this;
$($function).each(function() {
let $each = this;
$.ajax({
url: 'https://translate.yandex.net/api/v1.5/tr.json/translate',
method: 'GET',
dataType: 'JSONP',
crossDomain: true,
data: {
key: /* my-secret-key */,
text: $($each).text(),
lang: sourceLang + '-' + targetLang
},
success: function(response) {
try {
if(response.code !== 200)
throw "Response: " + response.code;
$($each).text(response.text[0])
} catch(error) {
console.error('Translation error on element: ', $($function).text());
console.error('Message returned by the server:', error);
}
},
error: function(xhr, status, error) {
console.error('Translation error on element: ', $($function).text());
console.error('Message returned by the server:', xhr.responseText);
}
});
});
}
});
After loading the code I do this:
$(document).ready(function() {
let lang = $('html').attr('lang').split('-')[0];
$('td td:visible').translate(lang, "en");
});
Note: the HTML tag looks like this <html lang="es-ES"> depending on the logged user language.
The issue I have is the table loads after a couple of seconds (since we are not in Production environment they could be more than 30). Therefore the previous code block is not useful.
Note: the <tbody> tag is created when the data is added.
What I have tried is:
1. Create a setInterval() and clearInterval() when the $('td:visible').length is greater than 0:
let iv = setInterval(function() {
let lang = $('html').attr('lang').split('-')[0];
let rows = $('tbody td:visible');
if(rows.length > 0) {
rows.translate(lang, "en");
clearInterval(iv);
}
}, 1000);
2. Set a .delay() before the translation:
let isTranslated = false;
while(!isTranslated) {
let lang = $('html').attr('lang').split('-')[0];
let rows = $('tbody td:visible');
if(rows.length > 0) {
rows.delay(1000).translate(lang, "en");
isTranslated = true;
}
}
The memory consumed by the browser is greater than 200MB. I also tried with $('table').on('DOMSubstreeModified', 'tbody', function() {}) but it didn't work.
So, what approach would you recommend to use this translation plugin on this table after it loads its tbody?
Edit 1:
I have changed my code so I perform less API requests, thanks to the recommendation of #lucifer63:
let $function = this;
let collection = [];
let translation = '';
$(this).each(function() {
collection.push($(this).text());
});
let text = collection.join('::');
$.ajax({
url: 'https://translate.yandex.net/api/v1.5/tr.json/translate',
method: 'GET',
dataType: 'JSONP',
crossDomain: true,
data: {
key: /* my-secret-key */,
text: text,
lang: sourceLang + '-' + targetLang
},
success: function(response) {
try {
if(response.code !== 200) {
throw "Response: " + response.code;
}
translation = response.text[0].split('::');
$($function).each(function() {
$(this).text(translation.shift());
});
} catch(error) {
console.error('Message returned by the server:', error);
}
},
error: function(xhr, status, error) {
console.error('Message returned by the server:', xhr.responseText);
}
});
But still, I need to figure out how to print after data has loaded.

Well... I think I found the answer I was seeking:
$('body').on('DOMNodeInserted', 'table', function() {
$('td:visible').translate('es', 'en');
});
It seems it is working correctly.

how to insert data into same pouchdb with same id

I have scenario that first onload page i put data into one pouchdb and with same pouchdb with other event of click it have to go server and fetch data in same pouch but it create two id ,but i need is second time it have into same pouch with first time create id how can i do this??
out put:
first time:
ressss---->:{"rows":[{"value":{"existing":[{"pattano":1843,"surveyNo":"156 ","subdivNo":"3B","ownerDetails":[{"relNo":1,"ownerNo":1,"RelationCode":"3","status":"Existing","udsRatio":"0","MaxOwnNumb":"1","relation":"மகள்","owner":"த்ஃப்க்","surveyNo":"156 ","statofown":"E","relative":"த்ஃப்க்","subDivNo":"3B"}]}],"_id":"6163ED1A-B1E8-4A90-8EEF-BF4B1A1E6132","_rev":"1-dea5c55e64c7543a26f24192ec5e94a5"}}]}
second time:
ressss---->:{"rows":[{"value":{"existing":[{"pattano":1843,"surveyNo":"156 ","subdivNo":"3B","ownerDetails":[{"relNo":1,"ownerNo":1,"RelationCode":"3","status":"Existing","udsRatio":"0","MaxOwnNumb":"1","relation":"மகள்","owner":"த்ஃப்க்","surveyNo":"156 ","statofown":"E","relative":"த்ஃப்க்","subDivNo":"3B"}]}],"_id":"6163ED1A-B1E8-4A90-8EEF-BF4B1A1E6132","_rev":"1-dea5c55e64c7543a26f24192ec5e94a5"}},{"value":{"existing":[{"pattano":457,"surveyNo":"111","subdivNo":"4","ownerDetails":[{"relNo":2,"ownerNo":1,"RelationCode":"1","status":"Existing","udsRatio":"0","MaxOwnNumb":"4","relation":"மகன்","owner":"மணிவேல்","surveyNo":"111","statofown":"E","relative":"ஆலப்பன்","subDivNo":"4"}]}],"_id":"E421B84D-2481-4ED1-ABDD-0C0B24BAEB91","_rev":"4-6713d5be5336f69b0f6c776b5c343d49"}}]}
my function is:
function fetchOwners(existingOwnersObj)
{
//alert("in fetch owners");
var inputVal = JSON.stringify(existingOwnersObj);
//alert("inputVal===> "+inputVal);
var hash1 = cal_hmac(inputVal);
var m = "";
document.getElementById('imgdiv')
.style.display = 'block';
$
.ajax(
{
url: urlService + serviceName + '/getPattaOwnersforJoint?jsoncallback=?',
headers:
{
"emp_value": ses,
"signature": hash,
"roleId": roleId,
"timestamp": t,
},
type: 'POST',
dataType: 'jsonp',
data: inputVal.toString(),
// jsonpCallback:"aaa",
contentType: "application/json",
success: function(data)
{
// alert("im in success===>"+JSON.stringify(data));
existown = {};
existown.existing = data;
//existown.slNno=slNno++;
str = JSON.stringify(existown);
//alert("str----->"+str);
var str1 = JSON.parse(str);
//new Pouch('idb://tamilNilamExist', function(err, db)
Pouch(puch, function(err, db)
{
var doc = existown;
db.put(doc, function(err, doc)
{
if (err)
{
return console.error(err);
}
else
{
//alert("Data Locally Stored Successfully adkkdd exizthhh");
$("#imgdiv")
.hide();
}
});
});
// getexist();
//
},
error: function(jqXHR, exception)
{
// alert("Error:"+JSON.stringify(jqXHR));
alert("Error Occured");
document.getElementById('imgdiv')
.style.display = 'none';
}
});
}

It looks like you are using a very old version of PouchDB. If you update to 3.4.0, you should be able to easily do something like:
// only need to instantiate the PouchDB once
var db = new PouchDB('mydb');
// inside of asynchronous functions, just call the db directly
function asyncSomething() {
function asyncSomethingElse() {
db.put(...)
}
}

Does jQuery.ajax() not always work? Is it prone to miss-fire?

I have an $.ajax function on my page to populate a facility dropdownlist based on a service type selection. If I change my service type selection back and forth between two options, randomly the values in the facility dropdownlist will remain the same and not change. Is there a way to prevent this? Am I doing something wrong?
Javascript
function hydrateFacilityDropDownList() {
var hiddenserviceTypeID = document.getElementById('<%=serviceTypeID.ClientID%>');
var clientContractID = document.getElementById('<%=clientContractID.ClientID%>').value;
var serviceDate = document.getElementById('<%=selectedServiceDate.ClientID%>').value;
var tableName = "resultTable";
$.ajax({
type: 'POST',
beforeSend: function () {
},
url: '<%= ResolveUrl("AddEditService.aspx/HydrateFacilityDropDownList") %>',
data: JSON.stringify({ serviceTypeID: TryParseInt(hiddenserviceTypeID.value, 0), clientContractID: TryParseInt(clientContractID, 0), serviceDate: serviceDate, tableName: tableName }),
contentType: "application/json; charset=utf-8",
dataType: "json",
success: function (data) {
a(data);
}
,error: function () {
alert('HydrateFacilityDropDownList error');
}
, complete: function () {
}
});
}
function a(data) {
var facilityDropDownList = $get('<%=servicesFormView.FindControl("facilityDropDownList").ClientID%>');
var selectedFacilityID = $get('<%= selectedFacilityID.ClientID%>').value;
var tableName = "resultTable";
if (facilityDropDownList.value != "") {
selectedFacilityID = facilityDropDownList.value;
}
$(facilityDropDownList).empty();
$(facilityDropDownList).prepend($('<option />', { value: "", text: "", selected: "selected" }));
$(data.d).find(tableName).each(function () {
var OptionValue = $(this).find('OptionValue').text();
var OptionText = $(this).find('OptionText').text();
var option = $("<option>" + OptionText + "</option>");
option.attr("value", OptionValue);
$(facilityDropDownList).append(option);
});
if ($(facilityDropDownList)[0].options.length > 1) {
if ($(facilityDropDownList)[0].options[1].text == "In Home") {
$(facilityDropDownList)[0].selectedIndex = 1;
}
}
if (TryParseInt(selectedFacilityID, 0) > 0) {
$(facilityDropDownList)[0].value = selectedFacilityID;
}
facilityDropDownList_OnChange();
}
Code Behind
[WebMethod]
public static string HydrateFacilityDropDownList(int serviceTypeID, int clientContractID, DateTime serviceDate, string tableName)
{
List<PackageAndServiceItemContent> svcItems = ServiceItemContents;
List<Facility> facilities = Facility.GetAllFacilities().ToList();
if (svcItems != null)
{
// Filter results
if (svcItems.Any(si => si.RequireFacilitySelection))
{
facilities = facilities.Where(f => f.FacilityTypeID > 0).ToList();
}
else
{
facilities = facilities.Where(f => f.FacilityTypeID == 0).ToList();
}
if (serviceTypeID == 0)
{
facilities.Clear();
}
}
return ConvertToXMLForDropDownList(tableName, facilities);
}
public static string ConvertToXMLForDropDownList<T>(string tableName, T genList)
{
// Create dummy table
DataTable dt = new DataTable(tableName);
dt.Columns.Add("OptionValue");
dt.Columns.Add("OptionText");
// Hydrate dummy table with filtered results
if (genList is List<Facility>)
{
foreach (Facility facility in genList as List<Facility>)
{
dt.Rows.Add(Convert.ToString(facility.ID), facility.FacilityName);
}
}
if (genList is List<EmployeeIDAndName>)
{
foreach (EmployeeIDAndName employeeIdAndName in genList as List<EmployeeIDAndName>)
{
dt.Rows.Add(Convert.ToString(employeeIdAndName.EmployeeID), employeeIdAndName.EmployeeName);
}
}
// Convert results to string to be parsed in jquery
string result;
using (StringWriter sw = new StringWriter())
{
dt.WriteXml(sw);
result = sw.ToString();
}
return result;
}

$get return XHR object not the return value of the success call and $get function isn't synchronous so you should wait for success and check data returned from the call
these two lines do something different than what you expect
var facilityDropDownList = $get('<%=servicesFormView.FindControl("facilityDropDownList").ClientID%>');
var selectedFacilityID = $get('<%= selectedFacilityID.ClientID%>').value;
change to something similar to this
var facilityDropDownList;
$.ajax({
url: '<%=servicesFormView.FindControl("facilityDropDownList").ClientID%>',
type: 'get',
dataType: 'html',
async: false,
success: function(data) {
facilityDropDownList= data;
}
});

Want to pass in returned data to my custom callback within jQuery's $.post()

Basically I'm creating my own callback and passing it into my method called _ajaxCall().
_ajaxCall() takes the following parameters:
data = an object containing the user submitted data to be POSTed to my server
postURL = the url to post to
callback = a function expression to be called upon successful return of data from the server.
Here is the _ajaxCall() method:
_ajaxCall: function (data, postURL, callback) {
$.post(postURL, {
data : data
}, 'json').done(function (returned) {
switch(returned.success) {
case true:
typeof callback === 'function' && callback(returned);
break;
}
}).fail(function (xhr, textStatus, errorThrown) {
if (status !== 200) {
window.location = document.URL;
}
});
}
commentUpdate : function(self) {
var postURL = '/submission/comment/' + self.attributes.commentId;
var data = {
action: self.attributes.action,
commentId : self.attributes.commentId,
comment: self.attributes.comment
};
var callback = function(returned) {
if (returned.success === true) {
// do something in here
} else {
// do other crap here
}
};
this._ajaxCall(data, postURL, callback);
}
But it's not passing returned to my custom callback() method. Why?