How to get the html from a url? [duplicate] - javascript

Apparently, I have completely misunderstood its semantics. I thought of something like this:
A client downloads JavaScript code MyCode.js from http://siteA - the origin.
The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
The client triggers some functionality of MyCode.js, which in turn make requests to http://siteB, which should be fine, despite being cross-origin requests.
Well, I am wrong. It does not work like this at all. So, I have read Cross-origin resource sharing and attempted to read Cross-Origin Resource Sharing in w3c recommendation.
One thing is sure - I still do not understand how I am supposed to use this header.
I have full control of both site A and site B. How do I enable the JavaScript code downloaded from the site A to access resources on the site B using this header?
P.S.: I do not want to utilize JSONP.

Access-Control-Allow-Origin is a CORS (cross-origin resource sharing) header.
When Site A tries to fetch content from Site B, Site B can send an Access-Control-Allow-Origin response header to tell the browser that the content of this page is accessible to certain origins. (An origin is a domain, plus a scheme and port number.) By default, Site B's pages are not accessible to any other origin; using the Access-Control-Allow-Origin header opens a door for cross-origin access by specific requesting origins.
For each resource/page that Site B wants to make accessible to Site A, Site B should serve its pages with the response header:
Access-Control-Allow-Origin: http://siteA.com
Modern browsers will not block cross-domain requests outright. If Site A requests a page from Site B, the browser will actually fetch the requested page on the network level and check if the response headers list Site A as a permitted requester domain. If Site B has not indicated that Site A is allowed to access this page, the browser will trigger the XMLHttpRequest's error event and deny the response data to the requesting JavaScript code.
Non-simple requests
What happens on the network level can be slightly more complex than explained above. If the request is a "non-simple" request, the browser first sends a data-less "preflight" OPTIONS request, to verify that the server will accept the request. A request is non-simple when either (or both):
using an HTTP verb other than GET or POST (e.g. PUT, DELETE)
using non-simple request headers; the only simple requests headers are:
Accept
Accept-Language
Content-Language
Content-Type (this is only simple when its value is application/x-www-form-urlencoded, multipart/form-data, or text/plain)
If the server responds to the OPTIONS preflight with appropriate response headers (Access-Control-Allow-Headers for non-simple headers, Access-Control-Allow-Methods for non-simple verbs) that match the non-simple verb and/or non-simple headers, then the browser sends the actual request.
Supposing that Site A wants to send a PUT request for /somePage, with a non-simple Content-Type value of application/json, the browser would first send a preflight request:
OPTIONS /somePage HTTP/1.1
Origin: http://siteA.com
Access-Control-Request-Method: PUT
Access-Control-Request-Headers: Content-Type
Note that Access-Control-Request-Method and Access-Control-Request-Headers are added by the browser automatically; you do not need to add them. This OPTIONS preflight gets the successful response headers:
Access-Control-Allow-Origin: http://siteA.com
Access-Control-Allow-Methods: GET, POST, PUT
Access-Control-Allow-Headers: Content-Type
When sending the actual request (after preflight is done), the behavior is identical to how a simple request is handled. In other words, a non-simple request whose preflight is successful is treated the same as a simple request (i.e., the server must still send Access-Control-Allow-Origin again for the actual response).
The browsers sends the actual request:
PUT /somePage HTTP/1.1
Origin: http://siteA.com
Content-Type: application/json
{ "myRequestContent": "JSON is so great" }
And the server sends back an Access-Control-Allow-Origin, just as it would for a simple request:
Access-Control-Allow-Origin: http://siteA.com
See Understanding XMLHttpRequest over CORS for a little more information about non-simple requests.

Cross-Origin Resource Sharing - CORS (A.K.A. Cross-Domain AJAX request) is an issue that most web developers might encounter, according to Same-Origin-Policy, browsers restrict client JavaScript in a security sandbox, usually JS cannot directly communicate with a remote server from a different domain. In the past developers created many tricky ways to achieve Cross-Domain resource request, most commonly using ways are:
Use Flash/Silverlight or server side as a "proxy" to communicate
with remote.
JSON With Padding (JSONP).
Embeds remote server in an iframe and communicate through fragment or window.name, refer here.
Those tricky ways have more or less some issues, for example JSONP might result in security hole if developers simply "eval" it, and #3 above, although it works, both domains should build strict contract between each other, it neither flexible nor elegant IMHO:)
W3C had introduced Cross-Origin Resource Sharing (CORS) as a standard solution to provide a safe, flexible and a recommended standard way to solve this issue.
The Mechanism
From a high level we can simply deem CORS as a contract between client AJAX call from domain A and a page hosted on domain B, a typical Cross-Origin request/response would be:
DomainA AJAX request headers
Host DomainB.com
User-Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0
Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8,application/json
Accept-Language en-us;
Accept-Encoding gzip, deflate
Keep-Alive 115
Origin http://DomainA.com
DomainB response headers
Cache-Control private
Content-Type application/json; charset=utf-8
Access-Control-Allow-Origin DomainA.com
Content-Length 87
Proxy-Connection Keep-Alive
Connection Keep-Alive
The blue parts I marked above were the kernal facts, "Origin" request header "indicates where the cross-origin request or preflight request originates from", the "Access-Control-Allow-Origin" response header indicates this page allows remote request from DomainA (if the value is * indicate allows remote requests from any domain).
As I mentioned above, W3 recommended browser to implement a "preflight request" before submiting the actually Cross-Origin HTTP request, in a nutshell it is an HTTP OPTIONS request:
OPTIONS DomainB.com/foo.aspx HTTP/1.1
If foo.aspx supports OPTIONS HTTP verb, it might return response like below:
HTTP/1.1 200 OK
Date: Wed, 01 Mar 2011 15:38:19 GMT
Access-Control-Allow-Origin: http://DomainA.com
Access-Control-Allow-Methods: POST, GET, OPTIONS, HEAD
Access-Control-Allow-Headers: X-Requested-With
Access-Control-Max-Age: 1728000
Connection: Keep-Alive
Content-Type: application/json
Only if the response contains "Access-Control-Allow-Origin" AND its value is "*" or contain the domain who submitted the CORS request, by satisfying this mandtory condition browser will submit the actual Cross-Domain request, and cache the result in "Preflight-Result-Cache".
I blogged about CORS three years ago: AJAX Cross-Origin HTTP request

According to this Mozilla Developer Network article,
A resource makes a cross-origin HTTP request when it requests a resource from a different domain, or port than the one which the first resource itself serves.
An HTML page served from http://domain-a.com makes an <img> src request for http://domain-b.com/image.jpg.
Many pages on the web today load resources like CSS style sheets, images and scripts from separate domains (thus it should be cool).
Same-Origin Policy
For security reasons, browsers restrict cross-origin HTTP requests initiated from within scripts.
For example, XMLHttpRequest and Fetch follow the same-origin policy.
So, a web application using XMLHttpRequest or Fetch could only make HTTP requests to its own domain.
Cross-Origin Resource Sharing (CORS)
To improve web applications, developers asked browser vendors to allow cross-domain requests.
The Cross-origin resource sharing (CORS) mechanism gives web servers cross-domain access controls, which enable secure cross-domain data transfers.
Modern browsers use CORS in an API container - such as XMLHttpRequest or fetch - to mitigate risks of cross-origin HTTP requests.
How CORS works (Access-Control-Allow-Origin header)
Wikipedia:
The CORS standard describes new HTTP headers which provide browsers and servers a way to request remote URLs only when they have permission.
Although some validation and authorization can be performed by the server, it is generally the browser's responsibility to support these headers and honor the restrictions they impose.
Example
The browser sends the OPTIONS request with an Origin HTTP header.
The value of this header is the domain that served the parent page. When a page from http://www.example.com attempts to access a user's data in service.example.com, the following request header would be sent to service.example.com:
Origin: http://www.example.com
The server at service.example.com may respond with:
An Access-Control-Allow-Origin (ACAO) header in its response indicating which origin sites are allowed.
For example:
Access-Control-Allow-Origin: http://www.example.com
An error page if the server does not allow the cross-origin request
An Access-Control-Allow-Origin (ACAO) header with a wildcard that allows all domains:
Access-Control-Allow-Origin: *

Whenever I start thinking about CORS, my intuition about which site hosts the headers is incorrect, just as you described in your question. For me, it helps to think about the purpose of the same-origin policy.
The purpose of the same-origin policy is to protect you from malicious JavaScript on siteA.com accessing private information you've chosen to share only with siteB.com. Without the same-origin policy, JavaScript written by the authors of siteA.com could have your browser make requests to siteB.com, using your authentication cookies for siteB.com. In this way, siteA.com could steal the secret information you share with siteB.com.
Sometimes you need to work cross domain, which is where CORS comes in. CORS relaxes the same-origin policy for siteB.com, using the Access-Control-Allow-Origin header to list other domains (siteA.com) that are trusted to run JavaScript that can interact with siteB.com.
To understand which domain should serve the CORS headers, consider this. You visit malicious.com, which contains some JavaScript that tries to make a cross domain request to mybank.com. It should be up to mybank.com, not malicious.com, to decide whether or not it sets CORS headers that relax the same-origin policy, allowing the JavaScript from malicious.com to interact with it. If malicous.com could set its own CORS headers allowing its own JavaScript access to mybank.com, this would completely nullify the same-origin policy.
I think the reason for my bad intuition is the point of view I have when developing a site. It's my site, with all my JavaScript. Therefore, it isn't doing anything malicious, and it should be up to me to specify which other sites my JavaScript can interact with. When in fact I should be thinking: Which other sites' JavaScript are trying to interact with my site and should I use CORS to allow them?

From my own experience, it's hard to find a simple explanation why CORS is even a concern.
Once you understand why it's there, the headers and discussion becomes a lot clearer. I'll give it a shot in a few lines.
It's all about cookies. Cookies are stored on a client by their domain.
An example story: On your computer, there's a cookie for yourbank.com. Maybe your session is in there.
Key point: When a client makes a request to the server, it will send the cookies stored under the domain for that request.
You're logged in on your browser to yourbank.com. You request to see all your accounts, and cookies are sent for yourbank.com. yourbank.com receives the pile of cookies and sends back its response (your accounts).
If another client makes a cross origin request to a server, those cookies are sent along, just as before. Ruh roh.
You browse to malicious.com. Malicious makes a bunch of requests to different banks, including yourbank.com.
Since the cookies are validated as expected, the server will authorize the response.
Those cookies get gathered up and sent along - and now, malicious.com has a response from yourbank.
Yikes.
So now, a few questions and answers become apparent:
"Why don't we just block the browser from doing that?" Yep. That's CORS.
"How do we get around it?" Have the server tell the request that CORS is OK.

1. A client downloads javascript code MyCode.js from http://siteA - the origin.
The code that does the downloading - your html script tag or xhr from javascript or whatever - came from, let's say, http://siteZ. And, when the browser requests MyCode.js, it sends an Origin: header saying "Origin: http://siteZ", because it can see that you're requesting to siteA and siteZ != siteA. (You cannot stop or interfere with this.)
2. The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
no. It means, Only siteB is allowed to do this request. So your request for MyCode.js from siteZ gets an error instead, and the browser typically gives you nothing. But if you make your server return A-C-A-O: siteZ instead, you'll get MyCode.js . Or if it sends '*', that'll work, that'll let everybody in. Or if the server always sends the string from the Origin: header... but... for security, if you're afraid of hackers, your server should only allow origins on a shortlist, that are allowed to make those requests.
Then, MyCode.js comes from siteA. When it makes requests to siteB, they are all cross-origin, the browser sends Origin: siteA, and siteB has to take the siteA, recognize it's on the short list of allowed requesters, and send back A-C-A-O: siteA. Only then will the browser let your script get the result of those requests.

Using React and Axios, join a proxy link to the URL and add a header as shown below:
https://cors-anywhere.herokuapp.com/ + Your API URL
Just adding the proxy link will work, but it can also throw an error for No Access again. Hence it is better to add a header as shown below.
axios.get(`https://cors-anywhere.herokuapp.com/[YOUR_API_URL]`,{headers: {'Access-Control-Allow-Origin': '*'}})
.then(response => console.log(response:data);
}
Warning: Not to be used in production
This is just a quick fix. If you're struggling with why you're not able to get a response, you can use this.
But again it's not the best answer for production.

If you are using PHP, try adding the following code at the beginning of the php file:
If you are using localhost, try this:
header("Access-Control-Allow-Origin: *");
If you are using external domains such as server, try this:
header("Access-Control-Allow-Origin: http://www.website.com");

I worked with Express.js 4, Node.js 7.4 and Angular, and I had the same problem. This helped me:
a) server side: in file app.js I add headers to all responses, like:
app.use(function(req, res, next) {
res.header('Access-Control-Allow-Origin', req.headers.origin);
res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");
next();
});
This must be before all routes.
I saw a lot of added this headers:
res.header("Access-Control-Allow-Headers","*");
res.header('Access-Control-Allow-Credentials', true);
res.header('Access-Control-Allow-Methods', 'GET,PUT,POST,DELETE');
But I don’t need that,
b) client side: in sending by Ajax, you need to add "withCredentials: true," like:
$http({
method: 'POST',
url: 'url',
withCredentials: true,
data : {}
}).then(function(response){
// Code
}, function (response) {
// Code
});

If you want just to test a cross-domain application in which the browser blocks your request, then you can just open your browser in unsafe mode and test your application without changing your code and without making your code unsafe.
From macOS, you can do this from the terminal line:
open -a Google\ Chrome --args --disable-web-security --user-data-dir

In Python, I have been using the Flask-CORS library with great success. It makes dealing with CORS super easy and painless. I added some code from the library's documentation below.
Installing:
pip install -U flask-cors
Simple example that allows CORS for all domains on all routes:
from flask import Flask
from flask_cors import CORS
app = Flask(__name__)
CORS(app)
#app.route("/")
def helloWorld():
return "Hello, cross-origin-world!"
For more specific examples, see the documentation. I have used the simple example above to get around the CORS issue in an Ionic application I am building that has to access a separate flask server.

Simply paste the following code in your web.config file.
Noted that, you have to paste the following code under <system.webServer> tag
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type" />
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS" />
</customHeaders>
</httpProtocol>

I can't configure it on the back-end server, but with these extensions in the browsers, it works for me:
For Firefox:
CORS Everywhere
For Google Chrome:
Allow CORS: Access-Control-Allow-Origin
Note: CORS works for me with this configuration:

For cross origin sharing, set header: 'Access-Control-Allow-Origin':'*';
Php: header('Access-Control-Allow-Origin':'*');
Node: app.use('Access-Control-Allow-Origin':'*');
This will allow to share content for different domain.

Nginx and Apache
As an addition to apsiller's answer, I would like to add a wiki graph which shows when a request is simple or not (and OPTIONS pre-flight request is send or not)
For a simple request (e.g., hotlinking images), you don't need to change your server configuration files, but you can add headers in the application (hosted on the server, e.g., in PHP) like Melvin Guerrero mentions in his answer - but remember: if you add full CORS headers in your server (configuration) and at same time you allow simple CORS in the application (e.g., PHP), this will not work at all.
And here are configurations for two popular servers:
turn on CORS on Nginx (nginx.conf file)
location ~ ^/index\.php(/|$) {
...
add_header 'Access-Control-Allow-Origin' "$http_origin" always; # if you change "$http_origin" to "*" you shoud get same result - allow all domain to CORS (but better change it to your particular domain)
add_header 'Access-Control-Allow-Credentials' 'true' always;
if ($request_method = OPTIONS) {
add_header 'Access-Control-Allow-Origin' "$http_origin"; # DO NOT remove THIS LINES (doubled with outside 'if' above)
add_header 'Access-Control-Allow-Credentials' 'true';
add_header 'Access-Control-Max-Age' 1728000; # cache preflight value for 20 days
add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS'; # arbitrary methods
add_header 'Access-Control-Allow-Headers' 'My-First-Header,My-Second-Header,Authorization,Content-Type,Accept,Origin'; # arbitrary headers
add_header 'Content-Length' 0;
add_header 'Content-Type' 'text/plain charset=UTF-8';
return 204;
}
}
turn on CORS on Apache (.htaccess file)
# ------------------------------------------------------------------------------
# | Cross-domain Ajax requests |
# ------------------------------------------------------------------------------
# Enable cross-origin Ajax requests.
# http://code.google.com/p/html5security/wiki/CrossOriginRequestSecurity
# http://enable-cors.org/
# change * (allow any domain) below to your domain
Header set Access-Control-Allow-Origin "*"
Header always set Access-Control-Allow-Methods "POST, GET, OPTIONS, DELETE, PUT"
Header always set Access-Control-Allow-Headers "My-First-Header,My-Second-Header,Authorization, content-type, csrf-token"
Header always set Access-Control-Allow-Credentials "true"

The Access-Control-Allow-Origin response header indicates whether the
response can be shared with requesting code from the given origin.
Header type Response header
-------------------------------------------
Forbidden header name no
A response that tells the browser to allow code from any origin to
access a resource will include the following:
Access-Control-Allow-Origin: *
For more information, visit Access-Control-Allow-Origin...

For .NET Core 3.1 API With Angular
Startup.cs : Add CORS
//SERVICES
public void ConfigureServices(IServiceCollection services){
//CORS (Cross Origin Resource Sharing)
//=====================================
services.AddCors();
}
//MIDDLEWARES
public void Configure(IApplicationBuilder app, IWebHostEnvironment env)
{
app.UseRouting();
//ORDER: CORS -> Authentication -> Authorization)
//CORS (Cross Origin Resource Sharing)
//=====================================
app.UseCors(x=>x.AllowAnyHeader().AllowAnyMethod().WithOrigins("http://localhost:4200"));
app.UseHttpsRedirection();
}
}
Controller : Enable CORS For Authorized Controller
//Authorize all methods inside this controller
[Authorize]
[EnableCors()]
public class UsersController : ControllerBase
{
//ActionMethods
}

Note: Only a temporary solution for testing
For those who can't control the backend for Options 405 Method Not Allowed, here is a workaround for theChrome browser.
Execute in the command line:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="path_to_profile"
Example:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="C:\Users\vital\AppData\Local\Google\Chrome\User Data\Profile 2"

Most CORS issues are because you are trying to request via client side ajax from a react, angular, jquery apps that are frontend basic libs.
You must request from a backend application.
You are trying to request from a frontend API, but the API you are trying to consume is expecting this request to be made from a backend application and it will never accept client side requests.

Related

no-cors fetch problem again functionality [duplicate]

Apparently, I have completely misunderstood its semantics. I thought of something like this:
A client downloads JavaScript code MyCode.js from http://siteA - the origin.
The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
The client triggers some functionality of MyCode.js, which in turn make requests to http://siteB, which should be fine, despite being cross-origin requests.
Well, I am wrong. It does not work like this at all. So, I have read Cross-origin resource sharing and attempted to read Cross-Origin Resource Sharing in w3c recommendation.
One thing is sure - I still do not understand how I am supposed to use this header.
I have full control of both site A and site B. How do I enable the JavaScript code downloaded from the site A to access resources on the site B using this header?
P.S.: I do not want to utilize JSONP.
Access-Control-Allow-Origin is a CORS (cross-origin resource sharing) header.
When Site A tries to fetch content from Site B, Site B can send an Access-Control-Allow-Origin response header to tell the browser that the content of this page is accessible to certain origins. (An origin is a domain, plus a scheme and port number.) By default, Site B's pages are not accessible to any other origin; using the Access-Control-Allow-Origin header opens a door for cross-origin access by specific requesting origins.
For each resource/page that Site B wants to make accessible to Site A, Site B should serve its pages with the response header:
Access-Control-Allow-Origin: http://siteA.com
Modern browsers will not block cross-domain requests outright. If Site A requests a page from Site B, the browser will actually fetch the requested page on the network level and check if the response headers list Site A as a permitted requester domain. If Site B has not indicated that Site A is allowed to access this page, the browser will trigger the XMLHttpRequest's error event and deny the response data to the requesting JavaScript code.
Non-simple requests
What happens on the network level can be slightly more complex than explained above. If the request is a "non-simple" request, the browser first sends a data-less "preflight" OPTIONS request, to verify that the server will accept the request. A request is non-simple when either (or both):
using an HTTP verb other than GET or POST (e.g. PUT, DELETE)
using non-simple request headers; the only simple requests headers are:
Accept
Accept-Language
Content-Language
Content-Type (this is only simple when its value is application/x-www-form-urlencoded, multipart/form-data, or text/plain)
If the server responds to the OPTIONS preflight with appropriate response headers (Access-Control-Allow-Headers for non-simple headers, Access-Control-Allow-Methods for non-simple verbs) that match the non-simple verb and/or non-simple headers, then the browser sends the actual request.
Supposing that Site A wants to send a PUT request for /somePage, with a non-simple Content-Type value of application/json, the browser would first send a preflight request:
OPTIONS /somePage HTTP/1.1
Origin: http://siteA.com
Access-Control-Request-Method: PUT
Access-Control-Request-Headers: Content-Type
Note that Access-Control-Request-Method and Access-Control-Request-Headers are added by the browser automatically; you do not need to add them. This OPTIONS preflight gets the successful response headers:
Access-Control-Allow-Origin: http://siteA.com
Access-Control-Allow-Methods: GET, POST, PUT
Access-Control-Allow-Headers: Content-Type
When sending the actual request (after preflight is done), the behavior is identical to how a simple request is handled. In other words, a non-simple request whose preflight is successful is treated the same as a simple request (i.e., the server must still send Access-Control-Allow-Origin again for the actual response).
The browsers sends the actual request:
PUT /somePage HTTP/1.1
Origin: http://siteA.com
Content-Type: application/json
{ "myRequestContent": "JSON is so great" }
And the server sends back an Access-Control-Allow-Origin, just as it would for a simple request:
Access-Control-Allow-Origin: http://siteA.com
See Understanding XMLHttpRequest over CORS for a little more information about non-simple requests.
Cross-Origin Resource Sharing - CORS (A.K.A. Cross-Domain AJAX request) is an issue that most web developers might encounter, according to Same-Origin-Policy, browsers restrict client JavaScript in a security sandbox, usually JS cannot directly communicate with a remote server from a different domain. In the past developers created many tricky ways to achieve Cross-Domain resource request, most commonly using ways are:
Use Flash/Silverlight or server side as a "proxy" to communicate
with remote.
JSON With Padding (JSONP).
Embeds remote server in an iframe and communicate through fragment or window.name, refer here.
Those tricky ways have more or less some issues, for example JSONP might result in security hole if developers simply "eval" it, and #3 above, although it works, both domains should build strict contract between each other, it neither flexible nor elegant IMHO:)
W3C had introduced Cross-Origin Resource Sharing (CORS) as a standard solution to provide a safe, flexible and a recommended standard way to solve this issue.
The Mechanism
From a high level we can simply deem CORS as a contract between client AJAX call from domain A and a page hosted on domain B, a typical Cross-Origin request/response would be:
DomainA AJAX request headers
Host DomainB.com
User-Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0
Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8,application/json
Accept-Language en-us;
Accept-Encoding gzip, deflate
Keep-Alive 115
Origin http://DomainA.com
DomainB response headers
Cache-Control private
Content-Type application/json; charset=utf-8
Access-Control-Allow-Origin DomainA.com
Content-Length 87
Proxy-Connection Keep-Alive
Connection Keep-Alive
The blue parts I marked above were the kernal facts, "Origin" request header "indicates where the cross-origin request or preflight request originates from", the "Access-Control-Allow-Origin" response header indicates this page allows remote request from DomainA (if the value is * indicate allows remote requests from any domain).
As I mentioned above, W3 recommended browser to implement a "preflight request" before submiting the actually Cross-Origin HTTP request, in a nutshell it is an HTTP OPTIONS request:
OPTIONS DomainB.com/foo.aspx HTTP/1.1
If foo.aspx supports OPTIONS HTTP verb, it might return response like below:
HTTP/1.1 200 OK
Date: Wed, 01 Mar 2011 15:38:19 GMT
Access-Control-Allow-Origin: http://DomainA.com
Access-Control-Allow-Methods: POST, GET, OPTIONS, HEAD
Access-Control-Allow-Headers: X-Requested-With
Access-Control-Max-Age: 1728000
Connection: Keep-Alive
Content-Type: application/json
Only if the response contains "Access-Control-Allow-Origin" AND its value is "*" or contain the domain who submitted the CORS request, by satisfying this mandtory condition browser will submit the actual Cross-Domain request, and cache the result in "Preflight-Result-Cache".
I blogged about CORS three years ago: AJAX Cross-Origin HTTP request
According to this Mozilla Developer Network article,
A resource makes a cross-origin HTTP request when it requests a resource from a different domain, or port than the one which the first resource itself serves.
An HTML page served from http://domain-a.com makes an <img> src request for http://domain-b.com/image.jpg.
Many pages on the web today load resources like CSS style sheets, images and scripts from separate domains (thus it should be cool).
Same-Origin Policy
For security reasons, browsers restrict cross-origin HTTP requests initiated from within scripts.
For example, XMLHttpRequest and Fetch follow the same-origin policy.
So, a web application using XMLHttpRequest or Fetch could only make HTTP requests to its own domain.
Cross-Origin Resource Sharing (CORS)
To improve web applications, developers asked browser vendors to allow cross-domain requests.
The Cross-origin resource sharing (CORS) mechanism gives web servers cross-domain access controls, which enable secure cross-domain data transfers.
Modern browsers use CORS in an API container - such as XMLHttpRequest or fetch - to mitigate risks of cross-origin HTTP requests.
How CORS works (Access-Control-Allow-Origin header)
Wikipedia:
The CORS standard describes new HTTP headers which provide browsers and servers a way to request remote URLs only when they have permission.
Although some validation and authorization can be performed by the server, it is generally the browser's responsibility to support these headers and honor the restrictions they impose.
Example
The browser sends the OPTIONS request with an Origin HTTP header.
The value of this header is the domain that served the parent page. When a page from http://www.example.com attempts to access a user's data in service.example.com, the following request header would be sent to service.example.com:
Origin: http://www.example.com
The server at service.example.com may respond with:
An Access-Control-Allow-Origin (ACAO) header in its response indicating which origin sites are allowed.
For example:
Access-Control-Allow-Origin: http://www.example.com
An error page if the server does not allow the cross-origin request
An Access-Control-Allow-Origin (ACAO) header with a wildcard that allows all domains:
Access-Control-Allow-Origin: *
Whenever I start thinking about CORS, my intuition about which site hosts the headers is incorrect, just as you described in your question. For me, it helps to think about the purpose of the same-origin policy.
The purpose of the same-origin policy is to protect you from malicious JavaScript on siteA.com accessing private information you've chosen to share only with siteB.com. Without the same-origin policy, JavaScript written by the authors of siteA.com could have your browser make requests to siteB.com, using your authentication cookies for siteB.com. In this way, siteA.com could steal the secret information you share with siteB.com.
Sometimes you need to work cross domain, which is where CORS comes in. CORS relaxes the same-origin policy for siteB.com, using the Access-Control-Allow-Origin header to list other domains (siteA.com) that are trusted to run JavaScript that can interact with siteB.com.
To understand which domain should serve the CORS headers, consider this. You visit malicious.com, which contains some JavaScript that tries to make a cross domain request to mybank.com. It should be up to mybank.com, not malicious.com, to decide whether or not it sets CORS headers that relax the same-origin policy, allowing the JavaScript from malicious.com to interact with it. If malicous.com could set its own CORS headers allowing its own JavaScript access to mybank.com, this would completely nullify the same-origin policy.
I think the reason for my bad intuition is the point of view I have when developing a site. It's my site, with all my JavaScript. Therefore, it isn't doing anything malicious, and it should be up to me to specify which other sites my JavaScript can interact with. When in fact I should be thinking: Which other sites' JavaScript are trying to interact with my site and should I use CORS to allow them?
From my own experience, it's hard to find a simple explanation why CORS is even a concern.
Once you understand why it's there, the headers and discussion becomes a lot clearer. I'll give it a shot in a few lines.
It's all about cookies. Cookies are stored on a client by their domain.
An example story: On your computer, there's a cookie for yourbank.com. Maybe your session is in there.
Key point: When a client makes a request to the server, it will send the cookies stored under the domain for that request.
You're logged in on your browser to yourbank.com. You request to see all your accounts, and cookies are sent for yourbank.com. yourbank.com receives the pile of cookies and sends back its response (your accounts).
If another client makes a cross origin request to a server, those cookies are sent along, just as before. Ruh roh.
You browse to malicious.com. Malicious makes a bunch of requests to different banks, including yourbank.com.
Since the cookies are validated as expected, the server will authorize the response.
Those cookies get gathered up and sent along - and now, malicious.com has a response from yourbank.
Yikes.
So now, a few questions and answers become apparent:
"Why don't we just block the browser from doing that?" Yep. That's CORS.
"How do we get around it?" Have the server tell the request that CORS is OK.
1. A client downloads javascript code MyCode.js from http://siteA - the origin.
The code that does the downloading - your html script tag or xhr from javascript or whatever - came from, let's say, http://siteZ. And, when the browser requests MyCode.js, it sends an Origin: header saying "Origin: http://siteZ", because it can see that you're requesting to siteA and siteZ != siteA. (You cannot stop or interfere with this.)
2. The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
no. It means, Only siteB is allowed to do this request. So your request for MyCode.js from siteZ gets an error instead, and the browser typically gives you nothing. But if you make your server return A-C-A-O: siteZ instead, you'll get MyCode.js . Or if it sends '*', that'll work, that'll let everybody in. Or if the server always sends the string from the Origin: header... but... for security, if you're afraid of hackers, your server should only allow origins on a shortlist, that are allowed to make those requests.
Then, MyCode.js comes from siteA. When it makes requests to siteB, they are all cross-origin, the browser sends Origin: siteA, and siteB has to take the siteA, recognize it's on the short list of allowed requesters, and send back A-C-A-O: siteA. Only then will the browser let your script get the result of those requests.
Using React and Axios, join a proxy link to the URL and add a header as shown below:
https://cors-anywhere.herokuapp.com/ + Your API URL
Just adding the proxy link will work, but it can also throw an error for No Access again. Hence it is better to add a header as shown below.
axios.get(`https://cors-anywhere.herokuapp.com/[YOUR_API_URL]`,{headers: {'Access-Control-Allow-Origin': '*'}})
.then(response => console.log(response:data);
}
Warning: Not to be used in production
This is just a quick fix. If you're struggling with why you're not able to get a response, you can use this.
But again it's not the best answer for production.
If you are using PHP, try adding the following code at the beginning of the php file:
If you are using localhost, try this:
header("Access-Control-Allow-Origin: *");
If you are using external domains such as server, try this:
header("Access-Control-Allow-Origin: http://www.website.com");
I worked with Express.js 4, Node.js 7.4 and Angular, and I had the same problem. This helped me:
a) server side: in file app.js I add headers to all responses, like:
app.use(function(req, res, next) {
res.header('Access-Control-Allow-Origin', req.headers.origin);
res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");
next();
});
This must be before all routes.
I saw a lot of added this headers:
res.header("Access-Control-Allow-Headers","*");
res.header('Access-Control-Allow-Credentials', true);
res.header('Access-Control-Allow-Methods', 'GET,PUT,POST,DELETE');
But I don’t need that,
b) client side: in sending by Ajax, you need to add "withCredentials: true," like:
$http({
method: 'POST',
url: 'url',
withCredentials: true,
data : {}
}).then(function(response){
// Code
}, function (response) {
// Code
});
If you want just to test a cross-domain application in which the browser blocks your request, then you can just open your browser in unsafe mode and test your application without changing your code and without making your code unsafe.
From macOS, you can do this from the terminal line:
open -a Google\ Chrome --args --disable-web-security --user-data-dir
In Python, I have been using the Flask-CORS library with great success. It makes dealing with CORS super easy and painless. I added some code from the library's documentation below.
Installing:
pip install -U flask-cors
Simple example that allows CORS for all domains on all routes:
from flask import Flask
from flask_cors import CORS
app = Flask(__name__)
CORS(app)
#app.route("/")
def helloWorld():
return "Hello, cross-origin-world!"
For more specific examples, see the documentation. I have used the simple example above to get around the CORS issue in an Ionic application I am building that has to access a separate flask server.
Simply paste the following code in your web.config file.
Noted that, you have to paste the following code under <system.webServer> tag
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type" />
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS" />
</customHeaders>
</httpProtocol>
I can't configure it on the back-end server, but with these extensions in the browsers, it works for me:
For Firefox:
CORS Everywhere
For Google Chrome:
Allow CORS: Access-Control-Allow-Origin
Note: CORS works for me with this configuration:
For cross origin sharing, set header: 'Access-Control-Allow-Origin':'*';
Php: header('Access-Control-Allow-Origin':'*');
Node: app.use('Access-Control-Allow-Origin':'*');
This will allow to share content for different domain.
Nginx and Apache
As an addition to apsiller's answer, I would like to add a wiki graph which shows when a request is simple or not (and OPTIONS pre-flight request is send or not)
For a simple request (e.g., hotlinking images), you don't need to change your server configuration files, but you can add headers in the application (hosted on the server, e.g., in PHP) like Melvin Guerrero mentions in his answer - but remember: if you add full CORS headers in your server (configuration) and at same time you allow simple CORS in the application (e.g., PHP), this will not work at all.
And here are configurations for two popular servers:
turn on CORS on Nginx (nginx.conf file)
location ~ ^/index\.php(/|$) {
...
add_header 'Access-Control-Allow-Origin' "$http_origin" always; # if you change "$http_origin" to "*" you shoud get same result - allow all domain to CORS (but better change it to your particular domain)
add_header 'Access-Control-Allow-Credentials' 'true' always;
if ($request_method = OPTIONS) {
add_header 'Access-Control-Allow-Origin' "$http_origin"; # DO NOT remove THIS LINES (doubled with outside 'if' above)
add_header 'Access-Control-Allow-Credentials' 'true';
add_header 'Access-Control-Max-Age' 1728000; # cache preflight value for 20 days
add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS'; # arbitrary methods
add_header 'Access-Control-Allow-Headers' 'My-First-Header,My-Second-Header,Authorization,Content-Type,Accept,Origin'; # arbitrary headers
add_header 'Content-Length' 0;
add_header 'Content-Type' 'text/plain charset=UTF-8';
return 204;
}
}
turn on CORS on Apache (.htaccess file)
# ------------------------------------------------------------------------------
# | Cross-domain Ajax requests |
# ------------------------------------------------------------------------------
# Enable cross-origin Ajax requests.
# http://code.google.com/p/html5security/wiki/CrossOriginRequestSecurity
# http://enable-cors.org/
# change * (allow any domain) below to your domain
Header set Access-Control-Allow-Origin "*"
Header always set Access-Control-Allow-Methods "POST, GET, OPTIONS, DELETE, PUT"
Header always set Access-Control-Allow-Headers "My-First-Header,My-Second-Header,Authorization, content-type, csrf-token"
Header always set Access-Control-Allow-Credentials "true"
The Access-Control-Allow-Origin response header indicates whether the
response can be shared with requesting code from the given origin.
Header type Response header
-------------------------------------------
Forbidden header name no
A response that tells the browser to allow code from any origin to
access a resource will include the following:
Access-Control-Allow-Origin: *
For more information, visit Access-Control-Allow-Origin...
For .NET Core 3.1 API With Angular
Startup.cs : Add CORS
//SERVICES
public void ConfigureServices(IServiceCollection services){
//CORS (Cross Origin Resource Sharing)
//=====================================
services.AddCors();
}
//MIDDLEWARES
public void Configure(IApplicationBuilder app, IWebHostEnvironment env)
{
app.UseRouting();
//ORDER: CORS -> Authentication -> Authorization)
//CORS (Cross Origin Resource Sharing)
//=====================================
app.UseCors(x=>x.AllowAnyHeader().AllowAnyMethod().WithOrigins("http://localhost:4200"));
app.UseHttpsRedirection();
}
}
Controller : Enable CORS For Authorized Controller
//Authorize all methods inside this controller
[Authorize]
[EnableCors()]
public class UsersController : ControllerBase
{
//ActionMethods
}
Note: Only a temporary solution for testing
For those who can't control the backend for Options 405 Method Not Allowed, here is a workaround for theChrome browser.
Execute in the command line:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="path_to_profile"
Example:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="C:\Users\vital\AppData\Local\Google\Chrome\User Data\Profile 2"
Most CORS issues are because you are trying to request via client side ajax from a react, angular, jquery apps that are frontend basic libs.
You must request from a backend application.
You are trying to request from a frontend API, but the API you are trying to consume is expecting this request to be made from a backend application and it will never accept client side requests.

XMLHttpRequest Issue with specific request [duplicate]

Apparently, I have completely misunderstood its semantics. I thought of something like this:
A client downloads JavaScript code MyCode.js from http://siteA - the origin.
The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
The client triggers some functionality of MyCode.js, which in turn make requests to http://siteB, which should be fine, despite being cross-origin requests.
Well, I am wrong. It does not work like this at all. So, I have read Cross-origin resource sharing and attempted to read Cross-Origin Resource Sharing in w3c recommendation.
One thing is sure - I still do not understand how I am supposed to use this header.
I have full control of both site A and site B. How do I enable the JavaScript code downloaded from the site A to access resources on the site B using this header?
P.S.: I do not want to utilize JSONP.
Access-Control-Allow-Origin is a CORS (cross-origin resource sharing) header.
When Site A tries to fetch content from Site B, Site B can send an Access-Control-Allow-Origin response header to tell the browser that the content of this page is accessible to certain origins. (An origin is a domain, plus a scheme and port number.) By default, Site B's pages are not accessible to any other origin; using the Access-Control-Allow-Origin header opens a door for cross-origin access by specific requesting origins.
For each resource/page that Site B wants to make accessible to Site A, Site B should serve its pages with the response header:
Access-Control-Allow-Origin: http://siteA.com
Modern browsers will not block cross-domain requests outright. If Site A requests a page from Site B, the browser will actually fetch the requested page on the network level and check if the response headers list Site A as a permitted requester domain. If Site B has not indicated that Site A is allowed to access this page, the browser will trigger the XMLHttpRequest's error event and deny the response data to the requesting JavaScript code.
Non-simple requests
What happens on the network level can be slightly more complex than explained above. If the request is a "non-simple" request, the browser first sends a data-less "preflight" OPTIONS request, to verify that the server will accept the request. A request is non-simple when either (or both):
using an HTTP verb other than GET or POST (e.g. PUT, DELETE)
using non-simple request headers; the only simple requests headers are:
Accept
Accept-Language
Content-Language
Content-Type (this is only simple when its value is application/x-www-form-urlencoded, multipart/form-data, or text/plain)
If the server responds to the OPTIONS preflight with appropriate response headers (Access-Control-Allow-Headers for non-simple headers, Access-Control-Allow-Methods for non-simple verbs) that match the non-simple verb and/or non-simple headers, then the browser sends the actual request.
Supposing that Site A wants to send a PUT request for /somePage, with a non-simple Content-Type value of application/json, the browser would first send a preflight request:
OPTIONS /somePage HTTP/1.1
Origin: http://siteA.com
Access-Control-Request-Method: PUT
Access-Control-Request-Headers: Content-Type
Note that Access-Control-Request-Method and Access-Control-Request-Headers are added by the browser automatically; you do not need to add them. This OPTIONS preflight gets the successful response headers:
Access-Control-Allow-Origin: http://siteA.com
Access-Control-Allow-Methods: GET, POST, PUT
Access-Control-Allow-Headers: Content-Type
When sending the actual request (after preflight is done), the behavior is identical to how a simple request is handled. In other words, a non-simple request whose preflight is successful is treated the same as a simple request (i.e., the server must still send Access-Control-Allow-Origin again for the actual response).
The browsers sends the actual request:
PUT /somePage HTTP/1.1
Origin: http://siteA.com
Content-Type: application/json
{ "myRequestContent": "JSON is so great" }
And the server sends back an Access-Control-Allow-Origin, just as it would for a simple request:
Access-Control-Allow-Origin: http://siteA.com
See Understanding XMLHttpRequest over CORS for a little more information about non-simple requests.
Cross-Origin Resource Sharing - CORS (A.K.A. Cross-Domain AJAX request) is an issue that most web developers might encounter, according to Same-Origin-Policy, browsers restrict client JavaScript in a security sandbox, usually JS cannot directly communicate with a remote server from a different domain. In the past developers created many tricky ways to achieve Cross-Domain resource request, most commonly using ways are:
Use Flash/Silverlight or server side as a "proxy" to communicate
with remote.
JSON With Padding (JSONP).
Embeds remote server in an iframe and communicate through fragment or window.name, refer here.
Those tricky ways have more or less some issues, for example JSONP might result in security hole if developers simply "eval" it, and #3 above, although it works, both domains should build strict contract between each other, it neither flexible nor elegant IMHO:)
W3C had introduced Cross-Origin Resource Sharing (CORS) as a standard solution to provide a safe, flexible and a recommended standard way to solve this issue.
The Mechanism
From a high level we can simply deem CORS as a contract between client AJAX call from domain A and a page hosted on domain B, a typical Cross-Origin request/response would be:
DomainA AJAX request headers
Host DomainB.com
User-Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0
Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8,application/json
Accept-Language en-us;
Accept-Encoding gzip, deflate
Keep-Alive 115
Origin http://DomainA.com
DomainB response headers
Cache-Control private
Content-Type application/json; charset=utf-8
Access-Control-Allow-Origin DomainA.com
Content-Length 87
Proxy-Connection Keep-Alive
Connection Keep-Alive
The blue parts I marked above were the kernal facts, "Origin" request header "indicates where the cross-origin request or preflight request originates from", the "Access-Control-Allow-Origin" response header indicates this page allows remote request from DomainA (if the value is * indicate allows remote requests from any domain).
As I mentioned above, W3 recommended browser to implement a "preflight request" before submiting the actually Cross-Origin HTTP request, in a nutshell it is an HTTP OPTIONS request:
OPTIONS DomainB.com/foo.aspx HTTP/1.1
If foo.aspx supports OPTIONS HTTP verb, it might return response like below:
HTTP/1.1 200 OK
Date: Wed, 01 Mar 2011 15:38:19 GMT
Access-Control-Allow-Origin: http://DomainA.com
Access-Control-Allow-Methods: POST, GET, OPTIONS, HEAD
Access-Control-Allow-Headers: X-Requested-With
Access-Control-Max-Age: 1728000
Connection: Keep-Alive
Content-Type: application/json
Only if the response contains "Access-Control-Allow-Origin" AND its value is "*" or contain the domain who submitted the CORS request, by satisfying this mandtory condition browser will submit the actual Cross-Domain request, and cache the result in "Preflight-Result-Cache".
I blogged about CORS three years ago: AJAX Cross-Origin HTTP request
According to this Mozilla Developer Network article,
A resource makes a cross-origin HTTP request when it requests a resource from a different domain, or port than the one which the first resource itself serves.
An HTML page served from http://domain-a.com makes an <img> src request for http://domain-b.com/image.jpg.
Many pages on the web today load resources like CSS style sheets, images and scripts from separate domains (thus it should be cool).
Same-Origin Policy
For security reasons, browsers restrict cross-origin HTTP requests initiated from within scripts.
For example, XMLHttpRequest and Fetch follow the same-origin policy.
So, a web application using XMLHttpRequest or Fetch could only make HTTP requests to its own domain.
Cross-Origin Resource Sharing (CORS)
To improve web applications, developers asked browser vendors to allow cross-domain requests.
The Cross-origin resource sharing (CORS) mechanism gives web servers cross-domain access controls, which enable secure cross-domain data transfers.
Modern browsers use CORS in an API container - such as XMLHttpRequest or fetch - to mitigate risks of cross-origin HTTP requests.
How CORS works (Access-Control-Allow-Origin header)
Wikipedia:
The CORS standard describes new HTTP headers which provide browsers and servers a way to request remote URLs only when they have permission.
Although some validation and authorization can be performed by the server, it is generally the browser's responsibility to support these headers and honor the restrictions they impose.
Example
The browser sends the OPTIONS request with an Origin HTTP header.
The value of this header is the domain that served the parent page. When a page from http://www.example.com attempts to access a user's data in service.example.com, the following request header would be sent to service.example.com:
Origin: http://www.example.com
The server at service.example.com may respond with:
An Access-Control-Allow-Origin (ACAO) header in its response indicating which origin sites are allowed.
For example:
Access-Control-Allow-Origin: http://www.example.com
An error page if the server does not allow the cross-origin request
An Access-Control-Allow-Origin (ACAO) header with a wildcard that allows all domains:
Access-Control-Allow-Origin: *
Whenever I start thinking about CORS, my intuition about which site hosts the headers is incorrect, just as you described in your question. For me, it helps to think about the purpose of the same-origin policy.
The purpose of the same-origin policy is to protect you from malicious JavaScript on siteA.com accessing private information you've chosen to share only with siteB.com. Without the same-origin policy, JavaScript written by the authors of siteA.com could have your browser make requests to siteB.com, using your authentication cookies for siteB.com. In this way, siteA.com could steal the secret information you share with siteB.com.
Sometimes you need to work cross domain, which is where CORS comes in. CORS relaxes the same-origin policy for siteB.com, using the Access-Control-Allow-Origin header to list other domains (siteA.com) that are trusted to run JavaScript that can interact with siteB.com.
To understand which domain should serve the CORS headers, consider this. You visit malicious.com, which contains some JavaScript that tries to make a cross domain request to mybank.com. It should be up to mybank.com, not malicious.com, to decide whether or not it sets CORS headers that relax the same-origin policy, allowing the JavaScript from malicious.com to interact with it. If malicous.com could set its own CORS headers allowing its own JavaScript access to mybank.com, this would completely nullify the same-origin policy.
I think the reason for my bad intuition is the point of view I have when developing a site. It's my site, with all my JavaScript. Therefore, it isn't doing anything malicious, and it should be up to me to specify which other sites my JavaScript can interact with. When in fact I should be thinking: Which other sites' JavaScript are trying to interact with my site and should I use CORS to allow them?
From my own experience, it's hard to find a simple explanation why CORS is even a concern.
Once you understand why it's there, the headers and discussion becomes a lot clearer. I'll give it a shot in a few lines.
It's all about cookies. Cookies are stored on a client by their domain.
An example story: On your computer, there's a cookie for yourbank.com. Maybe your session is in there.
Key point: When a client makes a request to the server, it will send the cookies stored under the domain for that request.
You're logged in on your browser to yourbank.com. You request to see all your accounts, and cookies are sent for yourbank.com. yourbank.com receives the pile of cookies and sends back its response (your accounts).
If another client makes a cross origin request to a server, those cookies are sent along, just as before. Ruh roh.
You browse to malicious.com. Malicious makes a bunch of requests to different banks, including yourbank.com.
Since the cookies are validated as expected, the server will authorize the response.
Those cookies get gathered up and sent along - and now, malicious.com has a response from yourbank.
Yikes.
So now, a few questions and answers become apparent:
"Why don't we just block the browser from doing that?" Yep. That's CORS.
"How do we get around it?" Have the server tell the request that CORS is OK.
1. A client downloads javascript code MyCode.js from http://siteA - the origin.
The code that does the downloading - your html script tag or xhr from javascript or whatever - came from, let's say, http://siteZ. And, when the browser requests MyCode.js, it sends an Origin: header saying "Origin: http://siteZ", because it can see that you're requesting to siteA and siteZ != siteA. (You cannot stop or interfere with this.)
2. The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
no. It means, Only siteB is allowed to do this request. So your request for MyCode.js from siteZ gets an error instead, and the browser typically gives you nothing. But if you make your server return A-C-A-O: siteZ instead, you'll get MyCode.js . Or if it sends '*', that'll work, that'll let everybody in. Or if the server always sends the string from the Origin: header... but... for security, if you're afraid of hackers, your server should only allow origins on a shortlist, that are allowed to make those requests.
Then, MyCode.js comes from siteA. When it makes requests to siteB, they are all cross-origin, the browser sends Origin: siteA, and siteB has to take the siteA, recognize it's on the short list of allowed requesters, and send back A-C-A-O: siteA. Only then will the browser let your script get the result of those requests.
Using React and Axios, join a proxy link to the URL and add a header as shown below:
https://cors-anywhere.herokuapp.com/ + Your API URL
Just adding the proxy link will work, but it can also throw an error for No Access again. Hence it is better to add a header as shown below.
axios.get(`https://cors-anywhere.herokuapp.com/[YOUR_API_URL]`,{headers: {'Access-Control-Allow-Origin': '*'}})
.then(response => console.log(response:data);
}
Warning: Not to be used in production
This is just a quick fix. If you're struggling with why you're not able to get a response, you can use this.
But again it's not the best answer for production.
If you are using PHP, try adding the following code at the beginning of the php file:
If you are using localhost, try this:
header("Access-Control-Allow-Origin: *");
If you are using external domains such as server, try this:
header("Access-Control-Allow-Origin: http://www.website.com");
I worked with Express.js 4, Node.js 7.4 and Angular, and I had the same problem. This helped me:
a) server side: in file app.js I add headers to all responses, like:
app.use(function(req, res, next) {
res.header('Access-Control-Allow-Origin', req.headers.origin);
res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");
next();
});
This must be before all routes.
I saw a lot of added this headers:
res.header("Access-Control-Allow-Headers","*");
res.header('Access-Control-Allow-Credentials', true);
res.header('Access-Control-Allow-Methods', 'GET,PUT,POST,DELETE');
But I don’t need that,
b) client side: in sending by Ajax, you need to add "withCredentials: true," like:
$http({
method: 'POST',
url: 'url',
withCredentials: true,
data : {}
}).then(function(response){
// Code
}, function (response) {
// Code
});
If you want just to test a cross-domain application in which the browser blocks your request, then you can just open your browser in unsafe mode and test your application without changing your code and without making your code unsafe.
From macOS, you can do this from the terminal line:
open -a Google\ Chrome --args --disable-web-security --user-data-dir
In Python, I have been using the Flask-CORS library with great success. It makes dealing with CORS super easy and painless. I added some code from the library's documentation below.
Installing:
pip install -U flask-cors
Simple example that allows CORS for all domains on all routes:
from flask import Flask
from flask_cors import CORS
app = Flask(__name__)
CORS(app)
#app.route("/")
def helloWorld():
return "Hello, cross-origin-world!"
For more specific examples, see the documentation. I have used the simple example above to get around the CORS issue in an Ionic application I am building that has to access a separate flask server.
Simply paste the following code in your web.config file.
Noted that, you have to paste the following code under <system.webServer> tag
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type" />
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS" />
</customHeaders>
</httpProtocol>
I can't configure it on the back-end server, but with these extensions in the browsers, it works for me:
For Firefox:
CORS Everywhere
For Google Chrome:
Allow CORS: Access-Control-Allow-Origin
Note: CORS works for me with this configuration:
For cross origin sharing, set header: 'Access-Control-Allow-Origin':'*';
Php: header('Access-Control-Allow-Origin':'*');
Node: app.use('Access-Control-Allow-Origin':'*');
This will allow to share content for different domain.
Nginx and Apache
As an addition to apsiller's answer, I would like to add a wiki graph which shows when a request is simple or not (and OPTIONS pre-flight request is send or not)
For a simple request (e.g., hotlinking images), you don't need to change your server configuration files, but you can add headers in the application (hosted on the server, e.g., in PHP) like Melvin Guerrero mentions in his answer - but remember: if you add full CORS headers in your server (configuration) and at same time you allow simple CORS in the application (e.g., PHP), this will not work at all.
And here are configurations for two popular servers:
turn on CORS on Nginx (nginx.conf file)
location ~ ^/index\.php(/|$) {
...
add_header 'Access-Control-Allow-Origin' "$http_origin" always; # if you change "$http_origin" to "*" you shoud get same result - allow all domain to CORS (but better change it to your particular domain)
add_header 'Access-Control-Allow-Credentials' 'true' always;
if ($request_method = OPTIONS) {
add_header 'Access-Control-Allow-Origin' "$http_origin"; # DO NOT remove THIS LINES (doubled with outside 'if' above)
add_header 'Access-Control-Allow-Credentials' 'true';
add_header 'Access-Control-Max-Age' 1728000; # cache preflight value for 20 days
add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS'; # arbitrary methods
add_header 'Access-Control-Allow-Headers' 'My-First-Header,My-Second-Header,Authorization,Content-Type,Accept,Origin'; # arbitrary headers
add_header 'Content-Length' 0;
add_header 'Content-Type' 'text/plain charset=UTF-8';
return 204;
}
}
turn on CORS on Apache (.htaccess file)
# ------------------------------------------------------------------------------
# | Cross-domain Ajax requests |
# ------------------------------------------------------------------------------
# Enable cross-origin Ajax requests.
# http://code.google.com/p/html5security/wiki/CrossOriginRequestSecurity
# http://enable-cors.org/
# change * (allow any domain) below to your domain
Header set Access-Control-Allow-Origin "*"
Header always set Access-Control-Allow-Methods "POST, GET, OPTIONS, DELETE, PUT"
Header always set Access-Control-Allow-Headers "My-First-Header,My-Second-Header,Authorization, content-type, csrf-token"
Header always set Access-Control-Allow-Credentials "true"
The Access-Control-Allow-Origin response header indicates whether the
response can be shared with requesting code from the given origin.
Header type Response header
-------------------------------------------
Forbidden header name no
A response that tells the browser to allow code from any origin to
access a resource will include the following:
Access-Control-Allow-Origin: *
For more information, visit Access-Control-Allow-Origin...
For .NET Core 3.1 API With Angular
Startup.cs : Add CORS
//SERVICES
public void ConfigureServices(IServiceCollection services){
//CORS (Cross Origin Resource Sharing)
//=====================================
services.AddCors();
}
//MIDDLEWARES
public void Configure(IApplicationBuilder app, IWebHostEnvironment env)
{
app.UseRouting();
//ORDER: CORS -> Authentication -> Authorization)
//CORS (Cross Origin Resource Sharing)
//=====================================
app.UseCors(x=>x.AllowAnyHeader().AllowAnyMethod().WithOrigins("http://localhost:4200"));
app.UseHttpsRedirection();
}
}
Controller : Enable CORS For Authorized Controller
//Authorize all methods inside this controller
[Authorize]
[EnableCors()]
public class UsersController : ControllerBase
{
//ActionMethods
}
Note: Only a temporary solution for testing
For those who can't control the backend for Options 405 Method Not Allowed, here is a workaround for theChrome browser.
Execute in the command line:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="path_to_profile"
Example:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="C:\Users\vital\AppData\Local\Google\Chrome\User Data\Profile 2"
Most CORS issues are because you are trying to request via client side ajax from a react, angular, jquery apps that are frontend basic libs.
You must request from a backend application.
You are trying to request from a frontend API, but the API you are trying to consume is expecting this request to be made from a backend application and it will never accept client side requests.

Fetch API: No 'Access-Control-Allow-Origin' error even after adding "Access-Control-Allow-Origin": "*" to my headers [duplicate]

Apparently, I have completely misunderstood its semantics. I thought of something like this:
A client downloads JavaScript code MyCode.js from http://siteA - the origin.
The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
The client triggers some functionality of MyCode.js, which in turn make requests to http://siteB, which should be fine, despite being cross-origin requests.
Well, I am wrong. It does not work like this at all. So, I have read Cross-origin resource sharing and attempted to read Cross-Origin Resource Sharing in w3c recommendation.
One thing is sure - I still do not understand how I am supposed to use this header.
I have full control of both site A and site B. How do I enable the JavaScript code downloaded from the site A to access resources on the site B using this header?
P.S.: I do not want to utilize JSONP.
Access-Control-Allow-Origin is a CORS (cross-origin resource sharing) header.
When Site A tries to fetch content from Site B, Site B can send an Access-Control-Allow-Origin response header to tell the browser that the content of this page is accessible to certain origins. (An origin is a domain, plus a scheme and port number.) By default, Site B's pages are not accessible to any other origin; using the Access-Control-Allow-Origin header opens a door for cross-origin access by specific requesting origins.
For each resource/page that Site B wants to make accessible to Site A, Site B should serve its pages with the response header:
Access-Control-Allow-Origin: http://siteA.com
Modern browsers will not block cross-domain requests outright. If Site A requests a page from Site B, the browser will actually fetch the requested page on the network level and check if the response headers list Site A as a permitted requester domain. If Site B has not indicated that Site A is allowed to access this page, the browser will trigger the XMLHttpRequest's error event and deny the response data to the requesting JavaScript code.
Non-simple requests
What happens on the network level can be slightly more complex than explained above. If the request is a "non-simple" request, the browser first sends a data-less "preflight" OPTIONS request, to verify that the server will accept the request. A request is non-simple when either (or both):
using an HTTP verb other than GET or POST (e.g. PUT, DELETE)
using non-simple request headers; the only simple requests headers are:
Accept
Accept-Language
Content-Language
Content-Type (this is only simple when its value is application/x-www-form-urlencoded, multipart/form-data, or text/plain)
If the server responds to the OPTIONS preflight with appropriate response headers (Access-Control-Allow-Headers for non-simple headers, Access-Control-Allow-Methods for non-simple verbs) that match the non-simple verb and/or non-simple headers, then the browser sends the actual request.
Supposing that Site A wants to send a PUT request for /somePage, with a non-simple Content-Type value of application/json, the browser would first send a preflight request:
OPTIONS /somePage HTTP/1.1
Origin: http://siteA.com
Access-Control-Request-Method: PUT
Access-Control-Request-Headers: Content-Type
Note that Access-Control-Request-Method and Access-Control-Request-Headers are added by the browser automatically; you do not need to add them. This OPTIONS preflight gets the successful response headers:
Access-Control-Allow-Origin: http://siteA.com
Access-Control-Allow-Methods: GET, POST, PUT
Access-Control-Allow-Headers: Content-Type
When sending the actual request (after preflight is done), the behavior is identical to how a simple request is handled. In other words, a non-simple request whose preflight is successful is treated the same as a simple request (i.e., the server must still send Access-Control-Allow-Origin again for the actual response).
The browsers sends the actual request:
PUT /somePage HTTP/1.1
Origin: http://siteA.com
Content-Type: application/json
{ "myRequestContent": "JSON is so great" }
And the server sends back an Access-Control-Allow-Origin, just as it would for a simple request:
Access-Control-Allow-Origin: http://siteA.com
See Understanding XMLHttpRequest over CORS for a little more information about non-simple requests.
Cross-Origin Resource Sharing - CORS (A.K.A. Cross-Domain AJAX request) is an issue that most web developers might encounter, according to Same-Origin-Policy, browsers restrict client JavaScript in a security sandbox, usually JS cannot directly communicate with a remote server from a different domain. In the past developers created many tricky ways to achieve Cross-Domain resource request, most commonly using ways are:
Use Flash/Silverlight or server side as a "proxy" to communicate
with remote.
JSON With Padding (JSONP).
Embeds remote server in an iframe and communicate through fragment or window.name, refer here.
Those tricky ways have more or less some issues, for example JSONP might result in security hole if developers simply "eval" it, and #3 above, although it works, both domains should build strict contract between each other, it neither flexible nor elegant IMHO:)
W3C had introduced Cross-Origin Resource Sharing (CORS) as a standard solution to provide a safe, flexible and a recommended standard way to solve this issue.
The Mechanism
From a high level we can simply deem CORS as a contract between client AJAX call from domain A and a page hosted on domain B, a typical Cross-Origin request/response would be:
DomainA AJAX request headers
Host DomainB.com
User-Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0
Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8,application/json
Accept-Language en-us;
Accept-Encoding gzip, deflate
Keep-Alive 115
Origin http://DomainA.com
DomainB response headers
Cache-Control private
Content-Type application/json; charset=utf-8
Access-Control-Allow-Origin DomainA.com
Content-Length 87
Proxy-Connection Keep-Alive
Connection Keep-Alive
The blue parts I marked above were the kernal facts, "Origin" request header "indicates where the cross-origin request or preflight request originates from", the "Access-Control-Allow-Origin" response header indicates this page allows remote request from DomainA (if the value is * indicate allows remote requests from any domain).
As I mentioned above, W3 recommended browser to implement a "preflight request" before submiting the actually Cross-Origin HTTP request, in a nutshell it is an HTTP OPTIONS request:
OPTIONS DomainB.com/foo.aspx HTTP/1.1
If foo.aspx supports OPTIONS HTTP verb, it might return response like below:
HTTP/1.1 200 OK
Date: Wed, 01 Mar 2011 15:38:19 GMT
Access-Control-Allow-Origin: http://DomainA.com
Access-Control-Allow-Methods: POST, GET, OPTIONS, HEAD
Access-Control-Allow-Headers: X-Requested-With
Access-Control-Max-Age: 1728000
Connection: Keep-Alive
Content-Type: application/json
Only if the response contains "Access-Control-Allow-Origin" AND its value is "*" or contain the domain who submitted the CORS request, by satisfying this mandtory condition browser will submit the actual Cross-Domain request, and cache the result in "Preflight-Result-Cache".
I blogged about CORS three years ago: AJAX Cross-Origin HTTP request
According to this Mozilla Developer Network article,
A resource makes a cross-origin HTTP request when it requests a resource from a different domain, or port than the one which the first resource itself serves.
An HTML page served from http://domain-a.com makes an <img> src request for http://domain-b.com/image.jpg.
Many pages on the web today load resources like CSS style sheets, images and scripts from separate domains (thus it should be cool).
Same-Origin Policy
For security reasons, browsers restrict cross-origin HTTP requests initiated from within scripts.
For example, XMLHttpRequest and Fetch follow the same-origin policy.
So, a web application using XMLHttpRequest or Fetch could only make HTTP requests to its own domain.
Cross-Origin Resource Sharing (CORS)
To improve web applications, developers asked browser vendors to allow cross-domain requests.
The Cross-origin resource sharing (CORS) mechanism gives web servers cross-domain access controls, which enable secure cross-domain data transfers.
Modern browsers use CORS in an API container - such as XMLHttpRequest or fetch - to mitigate risks of cross-origin HTTP requests.
How CORS works (Access-Control-Allow-Origin header)
Wikipedia:
The CORS standard describes new HTTP headers which provide browsers and servers a way to request remote URLs only when they have permission.
Although some validation and authorization can be performed by the server, it is generally the browser's responsibility to support these headers and honor the restrictions they impose.
Example
The browser sends the OPTIONS request with an Origin HTTP header.
The value of this header is the domain that served the parent page. When a page from http://www.example.com attempts to access a user's data in service.example.com, the following request header would be sent to service.example.com:
Origin: http://www.example.com
The server at service.example.com may respond with:
An Access-Control-Allow-Origin (ACAO) header in its response indicating which origin sites are allowed.
For example:
Access-Control-Allow-Origin: http://www.example.com
An error page if the server does not allow the cross-origin request
An Access-Control-Allow-Origin (ACAO) header with a wildcard that allows all domains:
Access-Control-Allow-Origin: *
Whenever I start thinking about CORS, my intuition about which site hosts the headers is incorrect, just as you described in your question. For me, it helps to think about the purpose of the same-origin policy.
The purpose of the same-origin policy is to protect you from malicious JavaScript on siteA.com accessing private information you've chosen to share only with siteB.com. Without the same-origin policy, JavaScript written by the authors of siteA.com could have your browser make requests to siteB.com, using your authentication cookies for siteB.com. In this way, siteA.com could steal the secret information you share with siteB.com.
Sometimes you need to work cross domain, which is where CORS comes in. CORS relaxes the same-origin policy for siteB.com, using the Access-Control-Allow-Origin header to list other domains (siteA.com) that are trusted to run JavaScript that can interact with siteB.com.
To understand which domain should serve the CORS headers, consider this. You visit malicious.com, which contains some JavaScript that tries to make a cross domain request to mybank.com. It should be up to mybank.com, not malicious.com, to decide whether or not it sets CORS headers that relax the same-origin policy, allowing the JavaScript from malicious.com to interact with it. If malicous.com could set its own CORS headers allowing its own JavaScript access to mybank.com, this would completely nullify the same-origin policy.
I think the reason for my bad intuition is the point of view I have when developing a site. It's my site, with all my JavaScript. Therefore, it isn't doing anything malicious, and it should be up to me to specify which other sites my JavaScript can interact with. When in fact I should be thinking: Which other sites' JavaScript are trying to interact with my site and should I use CORS to allow them?
From my own experience, it's hard to find a simple explanation why CORS is even a concern.
Once you understand why it's there, the headers and discussion becomes a lot clearer. I'll give it a shot in a few lines.
It's all about cookies. Cookies are stored on a client by their domain.
An example story: On your computer, there's a cookie for yourbank.com. Maybe your session is in there.
Key point: When a client makes a request to the server, it will send the cookies stored under the domain for that request.
You're logged in on your browser to yourbank.com. You request to see all your accounts, and cookies are sent for yourbank.com. yourbank.com receives the pile of cookies and sends back its response (your accounts).
If another client makes a cross origin request to a server, those cookies are sent along, just as before. Ruh roh.
You browse to malicious.com. Malicious makes a bunch of requests to different banks, including yourbank.com.
Since the cookies are validated as expected, the server will authorize the response.
Those cookies get gathered up and sent along - and now, malicious.com has a response from yourbank.
Yikes.
So now, a few questions and answers become apparent:
"Why don't we just block the browser from doing that?" Yep. That's CORS.
"How do we get around it?" Have the server tell the request that CORS is OK.
1. A client downloads javascript code MyCode.js from http://siteA - the origin.
The code that does the downloading - your html script tag or xhr from javascript or whatever - came from, let's say, http://siteZ. And, when the browser requests MyCode.js, it sends an Origin: header saying "Origin: http://siteZ", because it can see that you're requesting to siteA and siteZ != siteA. (You cannot stop or interfere with this.)
2. The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
no. It means, Only siteB is allowed to do this request. So your request for MyCode.js from siteZ gets an error instead, and the browser typically gives you nothing. But if you make your server return A-C-A-O: siteZ instead, you'll get MyCode.js . Or if it sends '*', that'll work, that'll let everybody in. Or if the server always sends the string from the Origin: header... but... for security, if you're afraid of hackers, your server should only allow origins on a shortlist, that are allowed to make those requests.
Then, MyCode.js comes from siteA. When it makes requests to siteB, they are all cross-origin, the browser sends Origin: siteA, and siteB has to take the siteA, recognize it's on the short list of allowed requesters, and send back A-C-A-O: siteA. Only then will the browser let your script get the result of those requests.
Using React and Axios, join a proxy link to the URL and add a header as shown below:
https://cors-anywhere.herokuapp.com/ + Your API URL
Just adding the proxy link will work, but it can also throw an error for No Access again. Hence it is better to add a header as shown below.
axios.get(`https://cors-anywhere.herokuapp.com/[YOUR_API_URL]`,{headers: {'Access-Control-Allow-Origin': '*'}})
.then(response => console.log(response:data);
}
Warning: Not to be used in production
This is just a quick fix. If you're struggling with why you're not able to get a response, you can use this.
But again it's not the best answer for production.
If you are using PHP, try adding the following code at the beginning of the php file:
If you are using localhost, try this:
header("Access-Control-Allow-Origin: *");
If you are using external domains such as server, try this:
header("Access-Control-Allow-Origin: http://www.website.com");
I worked with Express.js 4, Node.js 7.4 and Angular, and I had the same problem. This helped me:
a) server side: in file app.js I add headers to all responses, like:
app.use(function(req, res, next) {
res.header('Access-Control-Allow-Origin', req.headers.origin);
res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");
next();
});
This must be before all routes.
I saw a lot of added this headers:
res.header("Access-Control-Allow-Headers","*");
res.header('Access-Control-Allow-Credentials', true);
res.header('Access-Control-Allow-Methods', 'GET,PUT,POST,DELETE');
But I don’t need that,
b) client side: in sending by Ajax, you need to add "withCredentials: true," like:
$http({
method: 'POST',
url: 'url',
withCredentials: true,
data : {}
}).then(function(response){
// Code
}, function (response) {
// Code
});
If you want just to test a cross-domain application in which the browser blocks your request, then you can just open your browser in unsafe mode and test your application without changing your code and without making your code unsafe.
From macOS, you can do this from the terminal line:
open -a Google\ Chrome --args --disable-web-security --user-data-dir
In Python, I have been using the Flask-CORS library with great success. It makes dealing with CORS super easy and painless. I added some code from the library's documentation below.
Installing:
pip install -U flask-cors
Simple example that allows CORS for all domains on all routes:
from flask import Flask
from flask_cors import CORS
app = Flask(__name__)
CORS(app)
#app.route("/")
def helloWorld():
return "Hello, cross-origin-world!"
For more specific examples, see the documentation. I have used the simple example above to get around the CORS issue in an Ionic application I am building that has to access a separate flask server.
Simply paste the following code in your web.config file.
Noted that, you have to paste the following code under <system.webServer> tag
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type" />
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS" />
</customHeaders>
</httpProtocol>
I can't configure it on the back-end server, but with these extensions in the browsers, it works for me:
For Firefox:
CORS Everywhere
For Google Chrome:
Allow CORS: Access-Control-Allow-Origin
Note: CORS works for me with this configuration:
For cross origin sharing, set header: 'Access-Control-Allow-Origin':'*';
Php: header('Access-Control-Allow-Origin':'*');
Node: app.use('Access-Control-Allow-Origin':'*');
This will allow to share content for different domain.
Nginx and Apache
As an addition to apsiller's answer, I would like to add a wiki graph which shows when a request is simple or not (and OPTIONS pre-flight request is send or not)
For a simple request (e.g., hotlinking images), you don't need to change your server configuration files, but you can add headers in the application (hosted on the server, e.g., in PHP) like Melvin Guerrero mentions in his answer - but remember: if you add full CORS headers in your server (configuration) and at same time you allow simple CORS in the application (e.g., PHP), this will not work at all.
And here are configurations for two popular servers:
turn on CORS on Nginx (nginx.conf file)
location ~ ^/index\.php(/|$) {
...
add_header 'Access-Control-Allow-Origin' "$http_origin" always; # if you change "$http_origin" to "*" you shoud get same result - allow all domain to CORS (but better change it to your particular domain)
add_header 'Access-Control-Allow-Credentials' 'true' always;
if ($request_method = OPTIONS) {
add_header 'Access-Control-Allow-Origin' "$http_origin"; # DO NOT remove THIS LINES (doubled with outside 'if' above)
add_header 'Access-Control-Allow-Credentials' 'true';
add_header 'Access-Control-Max-Age' 1728000; # cache preflight value for 20 days
add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS'; # arbitrary methods
add_header 'Access-Control-Allow-Headers' 'My-First-Header,My-Second-Header,Authorization,Content-Type,Accept,Origin'; # arbitrary headers
add_header 'Content-Length' 0;
add_header 'Content-Type' 'text/plain charset=UTF-8';
return 204;
}
}
turn on CORS on Apache (.htaccess file)
# ------------------------------------------------------------------------------
# | Cross-domain Ajax requests |
# ------------------------------------------------------------------------------
# Enable cross-origin Ajax requests.
# http://code.google.com/p/html5security/wiki/CrossOriginRequestSecurity
# http://enable-cors.org/
# change * (allow any domain) below to your domain
Header set Access-Control-Allow-Origin "*"
Header always set Access-Control-Allow-Methods "POST, GET, OPTIONS, DELETE, PUT"
Header always set Access-Control-Allow-Headers "My-First-Header,My-Second-Header,Authorization, content-type, csrf-token"
Header always set Access-Control-Allow-Credentials "true"
The Access-Control-Allow-Origin response header indicates whether the
response can be shared with requesting code from the given origin.
Header type Response header
-------------------------------------------
Forbidden header name no
A response that tells the browser to allow code from any origin to
access a resource will include the following:
Access-Control-Allow-Origin: *
For more information, visit Access-Control-Allow-Origin...
For .NET Core 3.1 API With Angular
Startup.cs : Add CORS
//SERVICES
public void ConfigureServices(IServiceCollection services){
//CORS (Cross Origin Resource Sharing)
//=====================================
services.AddCors();
}
//MIDDLEWARES
public void Configure(IApplicationBuilder app, IWebHostEnvironment env)
{
app.UseRouting();
//ORDER: CORS -> Authentication -> Authorization)
//CORS (Cross Origin Resource Sharing)
//=====================================
app.UseCors(x=>x.AllowAnyHeader().AllowAnyMethod().WithOrigins("http://localhost:4200"));
app.UseHttpsRedirection();
}
}
Controller : Enable CORS For Authorized Controller
//Authorize all methods inside this controller
[Authorize]
[EnableCors()]
public class UsersController : ControllerBase
{
//ActionMethods
}
Note: Only a temporary solution for testing
For those who can't control the backend for Options 405 Method Not Allowed, here is a workaround for theChrome browser.
Execute in the command line:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="path_to_profile"
Example:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="C:\Users\vital\AppData\Local\Google\Chrome\User Data\Profile 2"
Most CORS issues are because you are trying to request via client side ajax from a react, angular, jquery apps that are frontend basic libs.
You must request from a backend application.
You are trying to request from a frontend API, but the API you are trying to consume is expecting this request to be made from a backend application and it will never accept client side requests.

AngularJS $http.get will not communicate with AWS server using authentication in the header [duplicate]

Mod note: This question is about why XMLHttpRequest/fetch/etc. on the browser are subject to the Same Access Policy restrictions (you get errors mentioning CORB or CORS) while Postman is not. This question is not about how to fix a "No 'Access-Control-Allow-Origin'..." error. It's about why they happen.
Please stop posting:
CORS configurations for every language/framework under the sun. Instead find your relevant language/framework's question.
3rd party services that allow a request to circumvent CORS
Command line options for turning off CORS for various browsers
I am trying to do authorization using JavaScript by connecting to the RESTful API built-in Flask. However, when I make the request, I get the following error:
XMLHttpRequest cannot load http://myApiUrl/login.
No 'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'null' is therefore not allowed access.
I know that the API or remote resource must set the header, but why did it work when I made the request via the Chrome extension Postman?
This is the request code:
$.ajax({
type: 'POST',
dataType: 'text',
url: api,
username: 'user',
password: 'pass',
crossDomain: true,
xhrFields: {
withCredentials: true,
},
})
.done(function (data) {
console.log('done');
})
.fail(function (xhr, textStatus, errorThrown) {
alert(xhr.responseText);
alert(textStatus);
});
If I understood it right you are doing an XMLHttpRequest to a different domain than your page is on. So the browser is blocking it as it usually allows a request in the same origin for security reasons. You need to do something different when you want to do a cross-domain request.
When you are using Postman they are not restricted by this policy. Quoted from Cross-Origin XMLHttpRequest:
Regular web pages can use the XMLHttpRequest object to send and receive data from remote servers, but they're limited by the same origin policy. Extensions aren't so limited. An extension can talk to remote servers outside of its origin, as long as it first requests cross-origin permissions.
WARNING: Using Access-Control-Allow-Origin: * can make your API/website vulnerable to cross-site request forgery (CSRF) attacks. Make certain you understand the risks before using this code.
It's very simple to solve if you are using PHP. Just add the following script in the beginning of your PHP page which handles the request:
<?php header('Access-Control-Allow-Origin: *'); ?>
If you are using Node-red you have to allow CORS in the node-red/settings.js file by un-commenting the following lines:
// The following property can be used to configure cross-origin resource sharing
// in the HTTP nodes.
// See https://github.com/troygoode/node-cors#configuration-options for
// details on its contents. The following is a basic permissive set of options:
httpNodeCors: {
origin: "*",
methods: "GET,PUT,POST,DELETE"
},
If you are using Flask same as the question; you have first to install flask-cors
pip install -U flask-cors
Then include the Flask cors package in your application.
from flask_cors import CORS
A simple application will look like:
from flask import Flask
from flask_cors import CORS
app = Flask(__name__)
CORS(app)
#app.route("/")
def helloWorld():
return "Hello, cross-origin-world!"
For more details, you can check the Flask documentation.
Because
$.ajax({type: "POST" - calls OPTIONS
$.post( - calls POST
Both are different. Postman calls "POST" properly, but when we call it, it will be "OPTIONS".
For C# web services - Web API
Please add the following code in your web.config file under the <system.webServer> tag. This will work:
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
</customHeaders>
</httpProtocol>
Please make sure you are not doing any mistake in the Ajax call.
jQuery
$.ajax({
url: 'http://mysite.microsoft.sample.xyz.com/api/mycall',
headers: {
'Content-Type': 'application/x-www-form-urlencoded'
},
type: "POST", /* or type:"GET" or type:"PUT" */
dataType: "json",
data: {
},
success: function (result) {
console.log(result);
},
error: function () {
console.log("error");
}
});
Note: If you are looking for downloading content from a third-party website then this will not help you. You can try the following code, but not JavaScript.
System.Net.WebClient wc = new System.Net.WebClient();
string str = wc.DownloadString("http://mysite.microsoft.sample.xyz.com/api/mycall");
Deep
In the below investigation as API, I use http://example.com instead of http://myApiUrl/login from your question, because this first one working. I assume that your page is on http://my-site.local:8088.
NOTE: The API and your page have different domains!
The reason why you see different results is that Postman:
set header Host=example.com (your API)
NOT set header Origin
Postman actually not use your website url at all (you only type your API address into Postman) - he only send request to API, so he assume that website has same address as API (browser not assume this)
This is similar to browsers' way of sending requests when the site and API has the same domain (browsers also set the header item Referer=http://my-site.local:8088, however I don't see it in Postman). When Origin header is not set, usually servers allow such requests by default.
This is the standard way how Postman sends requests. But a browser sends requests differently when your site and API have different domains, and then CORS occurs and the browser automatically:
sets header Host=example.com (yours as API)
sets header Origin=http://my-site.local:8088 (your site)
(The header Referer has the same value as Origin). And now in Chrome's Console & Networks tab you will see:
When you have Host != Origin this is CORS, and when the server detects such a request, it usually blocks it by default.
Origin=null is set when you open HTML content from a local directory, and it sends a request. The same situation is when you send a request inside an <iframe>, like in the below snippet (but here the Host header is not set at all) - in general, everywhere the HTML specification says opaque origin, you can translate that to Origin=null. More information about this you can find here.
fetch('http://example.com/api', {method: 'POST'});
Look on chrome-console > network tab
If you do not use a simple CORS request, usually the browser automatically also sends an OPTIONS request before sending the main request - more information is here. The snippet below shows it:
fetch('http://example.com/api', {
method: 'POST',
headers: { 'Content-Type': 'application/json'}
});
Look in chrome-console -> network tab to 'api' request.
This is the OPTIONS request (the server does not allow sending a POST request)
You can change the configuration of your server to allow CORS requests.
Here is an example configuration which turns on CORS on nginx (nginx.conf file) - be very careful with setting always/"$http_origin" for nginx and "*" for Apache - this will unblock CORS from any domain (in production instead of stars use your concrete page adres which consume your api)
location ~ ^/index\.php(/|$) {
...
add_header 'Access-Control-Allow-Origin' "$http_origin" always;
add_header 'Access-Control-Allow-Credentials' 'true' always;
if ($request_method = OPTIONS) {
add_header 'Access-Control-Allow-Origin' "$http_origin"; # DO NOT remove THIS LINES (doubled with outside 'if' above)
add_header 'Access-Control-Allow-Credentials' 'true';
add_header 'Access-Control-Max-Age' 1728000; # cache preflight value for 20 days
add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS';
add_header 'Access-Control-Allow-Headers' 'My-First-Header,My-Second-Header,Authorization,Content-Type,Accept,Origin';
add_header 'Content-Length' 0;
add_header 'Content-Type' 'text/plain charset=UTF-8';
return 204;
}
}
Here is an example configuration which turns on CORS on Apache (.htaccess file)
# ------------------------------------------------------------------------------
# | Cross-domain Ajax requests |
# ------------------------------------------------------------------------------
# Enable cross-origin Ajax requests.
# http://code.google.com/p/html5security/wiki/CrossOriginRequestSecurity
# http://enable-cors.org/
# <IfModule mod_headers.c>
# Header set Access-Control-Allow-Origin "*"
# </IfModule>
# Header set Header set Access-Control-Allow-Origin "*"
# Header always set Access-Control-Allow-Credentials "true"
Access-Control-Allow-Origin "http://your-page.com:80"
Header always set Access-Control-Allow-Methods "POST, GET, OPTIONS, DELETE, PUT"
Header always set Access-Control-Allow-Headers "My-First-Header,My-Second-Header,Authorization, content-type, csrf-token"
Applying a CORS restriction is a security feature defined by a server and implemented by a browser.
The browser looks at the CORS policy of the server and respects it.
However, the Postman tool does not bother about the CORS policy of the server.
That is why the CORS error appears in the browser, but not in Postman.
The error you get is due to the CORS standard, which sets some restrictions on how JavaScript can perform ajax requests.
The CORS standard is a client-side standard, implemented in the browser. So it is the browser which prevent the call from completing and generates the error message - not the server.
Postman does not implement the CORS restrictions, which is why you don't see the same error when making the same call from Postman.
Why doesn't Postman implement CORS? CORS defines the restrictions relative to the origin (URL domain) of the page which initiates the request. But in Postman the requests doesn't originate from a page with an URL so CORS does not apply.
Solution & Issue Origins
You are making a XMLHttpRequest to different domains, example:
Domain one: some-domain.com
Domain Two: some-different-domain.com
This difference in domain names triggers CORS (Cross-Origin Resource Sharing) policy called SOP (Same-Origin Policy) that enforces the use of same domains (hence Origin) in Ajax, XMLHttpRequest and other HTTP requests.
Why did it work when I made the request via the Chrome extension
Postman?
A client (most Browsers and Development Tools) has a choice to enforce the Same-Origin Policy.
Most browsers enforce the policy of Same-Origin Policy to prevent issues related to CSRF (Cross-Site Request Forgery) attack.
Postman as a development tool chooses not to enforce SOP while some browsers enforce, this is why you can send requests via Postman that you cannot send with XMLHttpRequest via JS using the browser.
For browser testing purposes:
Windows - Run:
chrome.exe --user-data-dir="C://Chrome dev session" --disable-web-security
The command above will disable chrome web security. So for example if you work on a local project and encounter CORS policy issue when trying to make a request, you can skip this type of error with the above command. Basically it will open a new chrome session.
You might also get this error if your gateway timeout is too short and the resource you are accessing takes longer to process than the timeout. This may be the case for complex database queries etc. Thus, the above error code can be disguishing this problem. Just check if the error code is 504 instead of 404 as in Kamil's answer or something else. If it is 504, then increasing the gateway timeout might fix the problem.
In my case the CORS error could be removed by disabling the same origin policy (CORS) in the Internet Explorer browser, see How to disable same origin policy Internet Explorer. After doing this, it was a pure 504 error in the log.
To resolve this issue, write this line of code in your doGet() or doPost() function whichever you are using in backend
response.setHeader("Access-Control-Allow-Origin", "*");
Instead of "*" you can type in the website or API URL endpoint which is accessing the website else it will be public.
Your IP address is not whitelisted, so you are getting this error.
Ask the backend staff to whitelist your IP address for the service you are accessing.
Access-Control-Allow-Headers
For me I got this issue for different reason, the remote domain was added to origins the deployed app works perfectly except one end point I got this issue:
Origin https://mai-frontend.vercel.app is not allowed by Access-Control-Allow-Origin. Status code: 500
and
Fetch API cannot load https://sciigo.herokuapp.com/recommendations/recommendationsByUser/8f1bb29e-8ce6-4df2-b138-ffe53650dbab due to access control checks.
I discovered that my Heroku database table does not contains all the columns of my local table after updating Heroku database table everything worked well.
It works for me by applying this middleware in globally:
<?php
namespace App\Http\Middleware;
use Closure;
class Cors {
public function handle($request, Closure $next) {
return $next($request)
->header('Access-Control-Allow-Origin', '*')
->header('Access-Control-Allow-Methods', 'GET, POST, PUT, DELETE, OPTIONS')
->header('Access-Control-Allow-Headers', "Accept,authorization,Authorization, Content-Type");
}
}

ajax request error "access control allow origin" [duplicate]

Apparently, I have completely misunderstood its semantics. I thought of something like this:
A client downloads JavaScript code MyCode.js from http://siteA - the origin.
The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
The client triggers some functionality of MyCode.js, which in turn make requests to http://siteB, which should be fine, despite being cross-origin requests.
Well, I am wrong. It does not work like this at all. So, I have read Cross-origin resource sharing and attempted to read Cross-Origin Resource Sharing in w3c recommendation.
One thing is sure - I still do not understand how I am supposed to use this header.
I have full control of both site A and site B. How do I enable the JavaScript code downloaded from the site A to access resources on the site B using this header?
P.S.: I do not want to utilize JSONP.
Access-Control-Allow-Origin is a CORS (cross-origin resource sharing) header.
When Site A tries to fetch content from Site B, Site B can send an Access-Control-Allow-Origin response header to tell the browser that the content of this page is accessible to certain origins. (An origin is a domain, plus a scheme and port number.) By default, Site B's pages are not accessible to any other origin; using the Access-Control-Allow-Origin header opens a door for cross-origin access by specific requesting origins.
For each resource/page that Site B wants to make accessible to Site A, Site B should serve its pages with the response header:
Access-Control-Allow-Origin: http://siteA.com
Modern browsers will not block cross-domain requests outright. If Site A requests a page from Site B, the browser will actually fetch the requested page on the network level and check if the response headers list Site A as a permitted requester domain. If Site B has not indicated that Site A is allowed to access this page, the browser will trigger the XMLHttpRequest's error event and deny the response data to the requesting JavaScript code.
Non-simple requests
What happens on the network level can be slightly more complex than explained above. If the request is a "non-simple" request, the browser first sends a data-less "preflight" OPTIONS request, to verify that the server will accept the request. A request is non-simple when either (or both):
using an HTTP verb other than GET or POST (e.g. PUT, DELETE)
using non-simple request headers; the only simple requests headers are:
Accept
Accept-Language
Content-Language
Content-Type (this is only simple when its value is application/x-www-form-urlencoded, multipart/form-data, or text/plain)
If the server responds to the OPTIONS preflight with appropriate response headers (Access-Control-Allow-Headers for non-simple headers, Access-Control-Allow-Methods for non-simple verbs) that match the non-simple verb and/or non-simple headers, then the browser sends the actual request.
Supposing that Site A wants to send a PUT request for /somePage, with a non-simple Content-Type value of application/json, the browser would first send a preflight request:
OPTIONS /somePage HTTP/1.1
Origin: http://siteA.com
Access-Control-Request-Method: PUT
Access-Control-Request-Headers: Content-Type
Note that Access-Control-Request-Method and Access-Control-Request-Headers are added by the browser automatically; you do not need to add them. This OPTIONS preflight gets the successful response headers:
Access-Control-Allow-Origin: http://siteA.com
Access-Control-Allow-Methods: GET, POST, PUT
Access-Control-Allow-Headers: Content-Type
When sending the actual request (after preflight is done), the behavior is identical to how a simple request is handled. In other words, a non-simple request whose preflight is successful is treated the same as a simple request (i.e., the server must still send Access-Control-Allow-Origin again for the actual response).
The browsers sends the actual request:
PUT /somePage HTTP/1.1
Origin: http://siteA.com
Content-Type: application/json
{ "myRequestContent": "JSON is so great" }
And the server sends back an Access-Control-Allow-Origin, just as it would for a simple request:
Access-Control-Allow-Origin: http://siteA.com
See Understanding XMLHttpRequest over CORS for a little more information about non-simple requests.
Cross-Origin Resource Sharing - CORS (A.K.A. Cross-Domain AJAX request) is an issue that most web developers might encounter, according to Same-Origin-Policy, browsers restrict client JavaScript in a security sandbox, usually JS cannot directly communicate with a remote server from a different domain. In the past developers created many tricky ways to achieve Cross-Domain resource request, most commonly using ways are:
Use Flash/Silverlight or server side as a "proxy" to communicate
with remote.
JSON With Padding (JSONP).
Embeds remote server in an iframe and communicate through fragment or window.name, refer here.
Those tricky ways have more or less some issues, for example JSONP might result in security hole if developers simply "eval" it, and #3 above, although it works, both domains should build strict contract between each other, it neither flexible nor elegant IMHO:)
W3C had introduced Cross-Origin Resource Sharing (CORS) as a standard solution to provide a safe, flexible and a recommended standard way to solve this issue.
The Mechanism
From a high level we can simply deem CORS as a contract between client AJAX call from domain A and a page hosted on domain B, a typical Cross-Origin request/response would be:
DomainA AJAX request headers
Host DomainB.com
User-Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0
Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8,application/json
Accept-Language en-us;
Accept-Encoding gzip, deflate
Keep-Alive 115
Origin http://DomainA.com
DomainB response headers
Cache-Control private
Content-Type application/json; charset=utf-8
Access-Control-Allow-Origin DomainA.com
Content-Length 87
Proxy-Connection Keep-Alive
Connection Keep-Alive
The blue parts I marked above were the kernal facts, "Origin" request header "indicates where the cross-origin request or preflight request originates from", the "Access-Control-Allow-Origin" response header indicates this page allows remote request from DomainA (if the value is * indicate allows remote requests from any domain).
As I mentioned above, W3 recommended browser to implement a "preflight request" before submiting the actually Cross-Origin HTTP request, in a nutshell it is an HTTP OPTIONS request:
OPTIONS DomainB.com/foo.aspx HTTP/1.1
If foo.aspx supports OPTIONS HTTP verb, it might return response like below:
HTTP/1.1 200 OK
Date: Wed, 01 Mar 2011 15:38:19 GMT
Access-Control-Allow-Origin: http://DomainA.com
Access-Control-Allow-Methods: POST, GET, OPTIONS, HEAD
Access-Control-Allow-Headers: X-Requested-With
Access-Control-Max-Age: 1728000
Connection: Keep-Alive
Content-Type: application/json
Only if the response contains "Access-Control-Allow-Origin" AND its value is "*" or contain the domain who submitted the CORS request, by satisfying this mandtory condition browser will submit the actual Cross-Domain request, and cache the result in "Preflight-Result-Cache".
I blogged about CORS three years ago: AJAX Cross-Origin HTTP request
According to this Mozilla Developer Network article,
A resource makes a cross-origin HTTP request when it requests a resource from a different domain, or port than the one which the first resource itself serves.
An HTML page served from http://domain-a.com makes an <img> src request for http://domain-b.com/image.jpg.
Many pages on the web today load resources like CSS style sheets, images and scripts from separate domains (thus it should be cool).
Same-Origin Policy
For security reasons, browsers restrict cross-origin HTTP requests initiated from within scripts.
For example, XMLHttpRequest and Fetch follow the same-origin policy.
So, a web application using XMLHttpRequest or Fetch could only make HTTP requests to its own domain.
Cross-Origin Resource Sharing (CORS)
To improve web applications, developers asked browser vendors to allow cross-domain requests.
The Cross-origin resource sharing (CORS) mechanism gives web servers cross-domain access controls, which enable secure cross-domain data transfers.
Modern browsers use CORS in an API container - such as XMLHttpRequest or fetch - to mitigate risks of cross-origin HTTP requests.
How CORS works (Access-Control-Allow-Origin header)
Wikipedia:
The CORS standard describes new HTTP headers which provide browsers and servers a way to request remote URLs only when they have permission.
Although some validation and authorization can be performed by the server, it is generally the browser's responsibility to support these headers and honor the restrictions they impose.
Example
The browser sends the OPTIONS request with an Origin HTTP header.
The value of this header is the domain that served the parent page. When a page from http://www.example.com attempts to access a user's data in service.example.com, the following request header would be sent to service.example.com:
Origin: http://www.example.com
The server at service.example.com may respond with:
An Access-Control-Allow-Origin (ACAO) header in its response indicating which origin sites are allowed.
For example:
Access-Control-Allow-Origin: http://www.example.com
An error page if the server does not allow the cross-origin request
An Access-Control-Allow-Origin (ACAO) header with a wildcard that allows all domains:
Access-Control-Allow-Origin: *
Whenever I start thinking about CORS, my intuition about which site hosts the headers is incorrect, just as you described in your question. For me, it helps to think about the purpose of the same-origin policy.
The purpose of the same-origin policy is to protect you from malicious JavaScript on siteA.com accessing private information you've chosen to share only with siteB.com. Without the same-origin policy, JavaScript written by the authors of siteA.com could have your browser make requests to siteB.com, using your authentication cookies for siteB.com. In this way, siteA.com could steal the secret information you share with siteB.com.
Sometimes you need to work cross domain, which is where CORS comes in. CORS relaxes the same-origin policy for siteB.com, using the Access-Control-Allow-Origin header to list other domains (siteA.com) that are trusted to run JavaScript that can interact with siteB.com.
To understand which domain should serve the CORS headers, consider this. You visit malicious.com, which contains some JavaScript that tries to make a cross domain request to mybank.com. It should be up to mybank.com, not malicious.com, to decide whether or not it sets CORS headers that relax the same-origin policy, allowing the JavaScript from malicious.com to interact with it. If malicous.com could set its own CORS headers allowing its own JavaScript access to mybank.com, this would completely nullify the same-origin policy.
I think the reason for my bad intuition is the point of view I have when developing a site. It's my site, with all my JavaScript. Therefore, it isn't doing anything malicious, and it should be up to me to specify which other sites my JavaScript can interact with. When in fact I should be thinking: Which other sites' JavaScript are trying to interact with my site and should I use CORS to allow them?
From my own experience, it's hard to find a simple explanation why CORS is even a concern.
Once you understand why it's there, the headers and discussion becomes a lot clearer. I'll give it a shot in a few lines.
It's all about cookies. Cookies are stored on a client by their domain.
An example story: On your computer, there's a cookie for yourbank.com. Maybe your session is in there.
Key point: When a client makes a request to the server, it will send the cookies stored under the domain for that request.
You're logged in on your browser to yourbank.com. You request to see all your accounts, and cookies are sent for yourbank.com. yourbank.com receives the pile of cookies and sends back its response (your accounts).
If another client makes a cross origin request to a server, those cookies are sent along, just as before. Ruh roh.
You browse to malicious.com. Malicious makes a bunch of requests to different banks, including yourbank.com.
Since the cookies are validated as expected, the server will authorize the response.
Those cookies get gathered up and sent along - and now, malicious.com has a response from yourbank.
Yikes.
So now, a few questions and answers become apparent:
"Why don't we just block the browser from doing that?" Yep. That's CORS.
"How do we get around it?" Have the server tell the request that CORS is OK.
1. A client downloads javascript code MyCode.js from http://siteA - the origin.
The code that does the downloading - your html script tag or xhr from javascript or whatever - came from, let's say, http://siteZ. And, when the browser requests MyCode.js, it sends an Origin: header saying "Origin: http://siteZ", because it can see that you're requesting to siteA and siteZ != siteA. (You cannot stop or interfere with this.)
2. The response header of MyCode.js contains Access-Control-Allow-Origin: http://siteB, which I thought meant that MyCode.js was allowed to make cross-origin references to the site B.
no. It means, Only siteB is allowed to do this request. So your request for MyCode.js from siteZ gets an error instead, and the browser typically gives you nothing. But if you make your server return A-C-A-O: siteZ instead, you'll get MyCode.js . Or if it sends '*', that'll work, that'll let everybody in. Or if the server always sends the string from the Origin: header... but... for security, if you're afraid of hackers, your server should only allow origins on a shortlist, that are allowed to make those requests.
Then, MyCode.js comes from siteA. When it makes requests to siteB, they are all cross-origin, the browser sends Origin: siteA, and siteB has to take the siteA, recognize it's on the short list of allowed requesters, and send back A-C-A-O: siteA. Only then will the browser let your script get the result of those requests.
Using React and Axios, join a proxy link to the URL and add a header as shown below:
https://cors-anywhere.herokuapp.com/ + Your API URL
Just adding the proxy link will work, but it can also throw an error for No Access again. Hence it is better to add a header as shown below.
axios.get(`https://cors-anywhere.herokuapp.com/[YOUR_API_URL]`,{headers: {'Access-Control-Allow-Origin': '*'}})
.then(response => console.log(response:data);
}
Warning: Not to be used in production
This is just a quick fix. If you're struggling with why you're not able to get a response, you can use this.
But again it's not the best answer for production.
If you are using PHP, try adding the following code at the beginning of the php file:
If you are using localhost, try this:
header("Access-Control-Allow-Origin: *");
If you are using external domains such as server, try this:
header("Access-Control-Allow-Origin: http://www.website.com");
I worked with Express.js 4, Node.js 7.4 and Angular, and I had the same problem. This helped me:
a) server side: in file app.js I add headers to all responses, like:
app.use(function(req, res, next) {
res.header('Access-Control-Allow-Origin', req.headers.origin);
res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");
next();
});
This must be before all routes.
I saw a lot of added this headers:
res.header("Access-Control-Allow-Headers","*");
res.header('Access-Control-Allow-Credentials', true);
res.header('Access-Control-Allow-Methods', 'GET,PUT,POST,DELETE');
But I don’t need that,
b) client side: in sending by Ajax, you need to add "withCredentials: true," like:
$http({
method: 'POST',
url: 'url',
withCredentials: true,
data : {}
}).then(function(response){
// Code
}, function (response) {
// Code
});
If you want just to test a cross-domain application in which the browser blocks your request, then you can just open your browser in unsafe mode and test your application without changing your code and without making your code unsafe.
From macOS, you can do this from the terminal line:
open -a Google\ Chrome --args --disable-web-security --user-data-dir
In Python, I have been using the Flask-CORS library with great success. It makes dealing with CORS super easy and painless. I added some code from the library's documentation below.
Installing:
pip install -U flask-cors
Simple example that allows CORS for all domains on all routes:
from flask import Flask
from flask_cors import CORS
app = Flask(__name__)
CORS(app)
#app.route("/")
def helloWorld():
return "Hello, cross-origin-world!"
For more specific examples, see the documentation. I have used the simple example above to get around the CORS issue in an Ionic application I am building that has to access a separate flask server.
Simply paste the following code in your web.config file.
Noted that, you have to paste the following code under <system.webServer> tag
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type" />
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS" />
</customHeaders>
</httpProtocol>
I can't configure it on the back-end server, but with these extensions in the browsers, it works for me:
For Firefox:
CORS Everywhere
For Google Chrome:
Allow CORS: Access-Control-Allow-Origin
Note: CORS works for me with this configuration:
For cross origin sharing, set header: 'Access-Control-Allow-Origin':'*';
Php: header('Access-Control-Allow-Origin':'*');
Node: app.use('Access-Control-Allow-Origin':'*');
This will allow to share content for different domain.
Nginx and Apache
As an addition to apsiller's answer, I would like to add a wiki graph which shows when a request is simple or not (and OPTIONS pre-flight request is send or not)
For a simple request (e.g., hotlinking images), you don't need to change your server configuration files, but you can add headers in the application (hosted on the server, e.g., in PHP) like Melvin Guerrero mentions in his answer - but remember: if you add full CORS headers in your server (configuration) and at same time you allow simple CORS in the application (e.g., PHP), this will not work at all.
And here are configurations for two popular servers:
turn on CORS on Nginx (nginx.conf file)
location ~ ^/index\.php(/|$) {
...
add_header 'Access-Control-Allow-Origin' "$http_origin" always; # if you change "$http_origin" to "*" you shoud get same result - allow all domain to CORS (but better change it to your particular domain)
add_header 'Access-Control-Allow-Credentials' 'true' always;
if ($request_method = OPTIONS) {
add_header 'Access-Control-Allow-Origin' "$http_origin"; # DO NOT remove THIS LINES (doubled with outside 'if' above)
add_header 'Access-Control-Allow-Credentials' 'true';
add_header 'Access-Control-Max-Age' 1728000; # cache preflight value for 20 days
add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS'; # arbitrary methods
add_header 'Access-Control-Allow-Headers' 'My-First-Header,My-Second-Header,Authorization,Content-Type,Accept,Origin'; # arbitrary headers
add_header 'Content-Length' 0;
add_header 'Content-Type' 'text/plain charset=UTF-8';
return 204;
}
}
turn on CORS on Apache (.htaccess file)
# ------------------------------------------------------------------------------
# | Cross-domain Ajax requests |
# ------------------------------------------------------------------------------
# Enable cross-origin Ajax requests.
# http://code.google.com/p/html5security/wiki/CrossOriginRequestSecurity
# http://enable-cors.org/
# change * (allow any domain) below to your domain
Header set Access-Control-Allow-Origin "*"
Header always set Access-Control-Allow-Methods "POST, GET, OPTIONS, DELETE, PUT"
Header always set Access-Control-Allow-Headers "My-First-Header,My-Second-Header,Authorization, content-type, csrf-token"
Header always set Access-Control-Allow-Credentials "true"
The Access-Control-Allow-Origin response header indicates whether the
response can be shared with requesting code from the given origin.
Header type Response header
-------------------------------------------
Forbidden header name no
A response that tells the browser to allow code from any origin to
access a resource will include the following:
Access-Control-Allow-Origin: *
For more information, visit Access-Control-Allow-Origin...
For .NET Core 3.1 API With Angular
Startup.cs : Add CORS
//SERVICES
public void ConfigureServices(IServiceCollection services){
//CORS (Cross Origin Resource Sharing)
//=====================================
services.AddCors();
}
//MIDDLEWARES
public void Configure(IApplicationBuilder app, IWebHostEnvironment env)
{
app.UseRouting();
//ORDER: CORS -> Authentication -> Authorization)
//CORS (Cross Origin Resource Sharing)
//=====================================
app.UseCors(x=>x.AllowAnyHeader().AllowAnyMethod().WithOrigins("http://localhost:4200"));
app.UseHttpsRedirection();
}
}
Controller : Enable CORS For Authorized Controller
//Authorize all methods inside this controller
[Authorize]
[EnableCors()]
public class UsersController : ControllerBase
{
//ActionMethods
}
Note: Only a temporary solution for testing
For those who can't control the backend for Options 405 Method Not Allowed, here is a workaround for theChrome browser.
Execute in the command line:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="path_to_profile"
Example:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --disable-web-security --user-data-dir="C:\Users\vital\AppData\Local\Google\Chrome\User Data\Profile 2"
Most CORS issues are because you are trying to request via client side ajax from a react, angular, jquery apps that are frontend basic libs.
You must request from a backend application.
You are trying to request from a frontend API, but the API you are trying to consume is expecting this request to be made from a backend application and it will never accept client side requests.

Categories

Resources