Related
This question already has answers here:
Remove duplicate values from JS array [duplicate]
(54 answers)
Completely removing duplicate items from an array
(11 answers)
remove all elements that occur more than once from array [duplicate]
(5 answers)
Closed 2 years ago.
I am trying to exclude duplicate numbers from the array. For example: if I filter an array of [1,2,2,3,5,5] the output should be [1,3].
function unique(arr) {
let sortArr = arr.sort()
let res = []
for (let i = 0; i < arr.length; i++) {
if (sortArr[i] != sortArr[i + 1]) {
res.push(sortArr[i])
}
}
return res
}
console.log(unique([1, 2, 2, 3, 5, 5]))
I was trying not to add duplicate numbers into an array, but instead of [1,3] I am getting [1,2,3,5]
The easiest tweak would be to check that both the next element and the previous element don't equal the current element:
function unique(arr) {
let sortArr = arr.sort()
let res = []
for (let i = 0; i < arr.length; i++) {
if (sortArr[i] != sortArr[i + 1] && sortArr[i] !== sortArr[i - 1]) {
res.push(sortArr[i])
}
}
return res
}
console.log(unique([1, 2, 2, 3, 5, 5]))
But .sort has a computational complexity of O(n log n). This can be done in O(n) time by counting up the number of results in an object instead:
function unique(arr) {
const ones = new Set();
const dupes = new Set();
for (const item of arr) {
if (dupes.has(item)) continue;
if (ones.has(item)) {
dupes.add(item);
ones.delete(item);
} else ones.add(item);
}
return [...ones];
}
console.log(unique([1, 2, 2, 3, 5, 5]))
Using Array.reduce, you can get the duplicated count of each item and based on that data, can get the non-duplicated values only as follows.
function unique(arr) {
const groupBy = arr.reduce((acc, cur) => {
acc[cur] ? acc[cur] ++ : acc[cur] = 1;
return acc;
}, {});
return Object.entries(groupBy)
.filter(([key, value]) => value === 1)
.map(([key]) => +key);
}
console.log(unique([1, 2, 2, 3, 5, 5]));
Count the number of values and returns only those that are equal to 1
function unique(array) {
var map = new Map();
array.forEach(a => map.set(a, (map.get(a) || 0) + 1));
return array.filter(a => map.get(a) === 1);
}
console.log(unique([1, 2, 2, 3, 5, 5]));
This question already has answers here:
How to get the difference between two arrays in JavaScript?
(84 answers)
Closed 5 years ago.
I have the following Arrays:
this.originalSelectedRows = [1,2,3,4,5];
this.selectedRows = [3,4,5,6,7,8];
I want to know the following:
How many numbers are in this.originalSelectedRows, but not in this.selectedRows
Which in this case would be 2:
1 and 2
and how many numbers are in this.selectedRows, but not this.originalSelectedRows
Which in this case would be 3:
6, 7 and 8
I have the following, which works fine:
let isOnListCount = 0;
let isNotOnListCount = 0
this.selectedRows.map((row) => {
const isSelected = this.originalSelectedRows.filter(x => x === row);
if(isSelected.length > 0)
isOnListCount++;
else
isNotOnListCount++;
});
But I want to know if this can be achieved in a neater fashion usng some of ES6's new features, or original JS
You could take the length as counter and reduce the value with common items.
var array1 = [1, 2, 3, 4, 5],
array2 = [3, 4, 5, 6, 7, 8],
count1 = array1.length,
count2 = array2.length;
array1.forEach(function (a) {
if (array2.includes(a)) {
count1--;
count2--;
}
});
console.log(count1, count2);
Sets will do a great job here :)
let set1 = new Set(this.originalSelectedRows)
let set2 = new Set(this.selectedRows)
let difference = new Set([...set1].filter(n => !set2.has(n)))
They are also relatively fast as well, but not as fast as a specially crafted solution :P
I am assuming that all of your items are unique though :)
I'd convert one array into a set and than filter the other array for items which aren't in the set.
const
valuesA = [1,2,3,4,5],
valuesB = [3,4,5,6,7,8];
function getUniqueValues(sourceArray, testArray) {
const
set = new Set(testArray);
return sourceArray.filter(value => !set.has(value));
}
console.log(`Values in A and not in B: ${getUniqueValues(valuesA, valuesB)}`);
console.log(`Values in B and not in A: ${getUniqueValues(valuesB, valuesA)}`);
You can just use Array#includes function to check if the element exists in the second array or not
const originalSelectedRows = [1,2,3,4,5];
const selectedRows = [3,4,5,6,7,8];
let isOnListCount = 0;
let isNotOnListCount = 0;
selectedRows.forEach(row =>
originalSelectedRows.includes(row) ? isOnListCount++ : isNotOnListCount++
);
console.log(isOnListCount);
console.log(isNotOnListCount);
Consider the following simple array:
var foods = ['hotdog', 'hamburger', 'soup', 'sandwich', 'hotdog', 'watermelon', 'hotdog'];
With underscore, is there a function or combination of functions I can use to select the most frequently occurring value (in this case it's hotdog)?
var foods = ['hotdog', 'hamburger', 'soup', 'sandwich', 'hotdog', 'watermelon', 'hotdog'];
var result = _.chain(foods).countBy().pairs().max(_.last).head().value();
console.log(result);
<script src="https://cdnjs.cloudflare.com/ajax/libs/underscore.js/1.8.3/underscore.js"></script>
countBy:
Sorts a list into groups and returns a count for the number of objects
in each group.
pairs:
Convert an object into a list of [key, value] pairs.
max:
Returns the maximum value in list. If an iterator function is provided, it will be used on each value to generate the criterion by which the value is ranked.
last:
Returns the last element of an array
head:
Returns the first element of an array
chain:
Returns a wrapped object. Calling methods on this object will continue to return wrapped objects until value is used.
value:
Extracts the value of a wrapped object.
You can do this in one pass using _.reduce. The basic idea is to keep track of the word frequencies and the most common word at the same time:
var o = _(foods).reduce(function(o, s) {
o.freq[s] = (o.freq[s] || 0) + 1;
if(!o.freq[o.most] || o.freq[s] > o.freq[o.most])
o.most = s;
return o;
}, { freq: { }, most: '' });
That leaves 'hotdot' in o.most.
Demo: http://jsfiddle.net/ambiguous/G9W4m/
You can also do it with each (or even a simple for loop) if you don't mind predeclaring the cache variable:
var o = { freq: { }, most: '' };
_(foods).each(function(s) {
o.freq[s] = (o.freq[s] || 0) + 1;
if(!o.freq[o.most] || o.freq[s] > o.freq[o.most])
o.most = s;
});
Demo: http://jsfiddle.net/ambiguous/WvXEV/
You could also break o into two pieces and use a slightly modified version of the above, then you wouldn't have to say o.most to get 'hotdog'.
Based off previous answers, here's my version to calculate mode for either an array of strings or numbers that accounts for draws in mode (when values have equal frequency) and also returns the frequency. You can then choose what to do with them.
Underscore and Lodash included.
// returns
// [['item', frequency]] where item is a string and frequency is an interger
// [['item', frequency], ['item', frequency], ['item', frequency] ... ] for draws
// examples:
// unique mode: creed appears the most times in array
// returns: [['creed', 4]]
// draw mode: 'jim' and 'creed' both occur 4 times in array
// returns: [['jim', 4], ['creed', 4]]
// underscore:
const usMode = arr => _.chain(arr).countBy().pairs().value().sort((a, b) => b[1] - a[1]).filter((e,i,a) => e[1] === a[0][1])
// lodash
const ldMode = arr => _.chain(arr).countBy().toPairs().value().sort((a, b) => b[1] - a[1]).filter((e,i,a) => e[1] === a[0][1])
// usage
usMode([1,2,3,3,3,4,5,6,7])
// [['3', 3]]
using underscore:
// underscore
const strsUniqueArr = ['jim','pam','creed','pam','jim','creed','creed','creed']
const strsDrawArr = ['pam','jim','creed','jim','jim','creed','creed','creed', 'pam', 'jim']
const numsUniqueArr = [1, 2, 2, 2, 2, 3 ,4, 5]
const numsDrawArr = [1, 1, 1, 1, 2, 2, 2, 2, 3 ,4, 5]
const usMode = arr => _.chain(arr).countBy().pairs().value().sort((a, b) => b[1] - a[1]).filter((e,i,a) => e[1] === a[0][1])
console.log('empty', usMode([]))
console.log('unique strs', usMode(strsUniqueArr))
console.log('draw sts', usMode(strsDrawArr))
console.log('unique nums', usMode(numsUniqueArr))
console.log('draw nums', usMode(numsDrawArr))
<script src="https://cdnjs.cloudflare.com/ajax/libs/underscore.js/1.9.1/underscore-min.js"></script>
using lodash:
// lodash
const strsUniqueArr = ['jim','pam','creed','pam','jim','creed','creed','creed']
const strsDrawArr = ['pam','jim','creed','jim','jim','creed','creed','creed', 'pam', 'jim']
const numsUniqueArr = [1, 2, 2, 2, 2, 3 ,4, 5]
const numsDrawArr = [1, 1, 1, 1, 2, 2, 2, 2, 3 ,4, 5]
const ldMode = arr => _.chain(arr).countBy().toPairs().value().sort((a, b) => b[1] - a[1]).filter((e,i,a) => e[1] === a[0][1])
console.log('empty', ldMode([]))
console.log('unique strs', ldMode(strsUniqueArr))
console.log('draw sts', ldMode(strsDrawArr))
console.log('unique nums', ldMode(numsUniqueArr))
console.log('draw nums', ldMode(numsDrawArr))
<script src="https://cdnjs.cloudflare.com/ajax/libs/lodash.js/4.17.15/lodash.min.js"></script>
I have an array:
[1, 2, 3, 5, 2, 8, 9, 2]
I would like to know how many 2s are in the array.
What is the most elegant way to do it in JavaScript without looping with for loop?
[this answer is a bit dated: read the edits, in the notion of 'equal' in javascript is ambiguous]
Say hello to your friends: map and filter and reduce and forEach and every etc.
(I only occasionally write for-loops in javascript, because of block-level scoping is missing, so you have to use a function as the body of the loop anyway if you need to capture or clone your iteration index or value. For-loops are more efficient generally, but sometimes you need a closure.)
The most readable way:
[....].filter(x => x==2).length
(We could have written .filter(function(x){return x==2}).length instead)
The following is more space-efficient (O(1) rather than O(N)), but I'm not sure how much of a benefit/penalty you might pay in terms of time (not more than a constant factor since you visit each element exactly once):
[....].reduce((total,x) => (x==2 ? total+1 : total), 0)
or as a commenter kindly pointed out:
[....].reduce((total,x) => total+(x==2), 0)
(If you need to optimize this particular piece of code, a for loop might be faster on some browsers... you can test things on jsperf.com.)
You can then be elegant and turn it into a prototype function:
[1, 2, 3, 5, 2, 8, 9, 2].count(2)
Like this:
Object.defineProperties(Array.prototype, {
count: {
value: function(value) {
return this.filter(x => x==value).length;
}
}
});
You can also stick the regular old for-loop technique (see other answers) inside the above property definition (again, that would likely be much faster).
2017 edit:
Whoops, this answer has gotten more popular than the correct answer. Actually, just use the accepted answer. While this answer may be cute, the js compilers probably don't (or can't due to spec) optimize such cases. So you should really write a simple for loop:
Object.defineProperties(Array.prototype, {
count: {
value: function(query) {
/*
Counts number of occurrences of query in array, an integer >= 0
Uses the javascript == notion of equality.
*/
var count = 0;
for(let i=0; i<this.length; i++)
if (this[i]==query)
count++;
return count;
}
}
});
You could define a version .countStrictEq(...) which used the === notion of equality. The notion of equality may be important to what you're doing! (for example [1,10,3,'10'].count(10)==2, because numbers like '4'==4 in javascript... hence calling it .countEq or .countNonstrict stresses it uses the == operator.)
Caveat:
Defining a common name on the prototype should be done with care. It is fine if you control your code, but bad if everyone wants to declare their own [].count function, especially if they behave differently. You may ask yourself "but .count(query) surely sounds quite perfect and canonical"... but consider perhaps you could do something like [].count(x=> someExpr of x). In that case you define functions like countIn(query, container) (under myModuleName.countIn), or something, or [].myModuleName_count().
Also consider using your own multiset data structure (e.g. like python's 'collections.Counter') to avoid having to do the counting in the first place. This works for exact matches of the form [].filter(x=> x==???).length (worst case O(N) down to O(1)), and modified will speed up queries of the form [].filter(filterFunction).length (roughly by a factor of #total/#duplicates).
class Multiset extends Map {
constructor(...args) {
super(...args);
}
add(elem) {
if (!this.has(elem))
this.set(elem, 1);
else
this.set(elem, this.get(elem)+1);
}
remove(elem) {
var count = this.has(elem) ? this.get(elem) : 0;
if (count>1) {
this.set(elem, count-1);
} else if (count==1) {
this.delete(elem);
} else if (count==0)
throw `tried to remove element ${elem} of type ${typeof elem} from Multiset, but does not exist in Multiset (count is 0 and cannot go negative)`;
// alternatively do nothing {}
}
}
Demo:
> counts = new Multiset([['a',1],['b',3]])
Map(2) {"a" => 1, "b" => 3}
> counts.add('c')
> counts
Map(3) {"a" => 1, "b" => 3, "c" => 1}
> counts.remove('a')
> counts
Map(2) {"b" => 3, "c" => 1}
> counts.remove('a')
Uncaught tried to remove element a of type string from Multiset, but does not exist in Multiset (count is 0 and cannot go negative)
sidenote: Though, if you still wanted the functional-programming way (or a throwaway one-liner without overriding Array.prototype), you could write it more tersely nowadays as [...].filter(x => x==2).length. If you care about performance, note that while this is asymptotically the same performance as the for-loop (O(N) time), it may require O(N) extra memory (instead of O(1) memory) because it will almost certainly generate an intermediate array and then count the elements of that intermediate array.
Modern JavaScript:
Note that you should always use triple equals === when doing comparison in JavaScript (JS). The triple equals make sure, that JS comparison behaves like double equals == in other languages (there is one exception, see below). The following solution shows how to solve this the functional way, which will ensure that you will never have out of bounds error:
// Let has local scope
let array = [1, 2, 3, 5, 2, 8, 9, 2]
// Functional filter with an Arrow function
// Filter all elements equal to 2 and return the length (count)
array.filter(x => x === 2).length // -> 3
The following anonymous Arrow function (lambda function) in JavaScript:
(x) => {
const k = 2
return k * x
}
may be simplified to this concise form for a single input:
x => 2 * x
where the return is implied.
Always use triple equals: === for comparison in JS, with the exception of when checking for nullability: if (something == null) {} as it includes a check for undefined, if you only use double equals as in this case.
Very simple:
var count = 0;
for(var i = 0; i < array.length; ++i){
if(array[i] == 2)
count++;
}
2017:
If someone is still interested in the question, my solution is the following:
const arrayToCount = [1, 2, 3, 5, 2, 8, 9, 2];
const result = arrayToCount.filter(i => i === 2).length;
console.log('number of the found elements: ' + result);
Here is an ES2017+ way to get the counts for all array items in O(N):
const arr = [1, 2, 3, 5, 2, 8, 9, 2];
const counts = {};
arr.forEach((el) => {
counts[el] = counts[el] ? (counts[el] + 1) : 1;
});
You can also optionally sort the output:
const countsSorted = Object.entries(counts).sort(([_, a], [__, b]) => a - b);
console.log(countsSorted) for your example array:
[
[ '2', 3 ],
[ '1', 1 ],
[ '3', 1 ],
[ '5', 1 ],
[ '8', 1 ],
[ '9', 1 ]
]
If you are using lodash or underscore the _.countBy method will provide an object of aggregate totals keyed by each value in the array. You can turn this into a one-liner if you only need to count one value:
_.countBy(['foo', 'foo', 'bar'])['foo']; // 2
This also works fine on arrays of numbers. The one-liner for your example would be:
_.countBy([1, 2, 3, 5, 2, 8, 9, 2])[2]; // 3
Weirdest way I can think of doing this is:
(a.length-(' '+a.join(' ')+' ').split(' '+n+' ').join(' ').match(/ /g).length)+1
Where:
a is the array
n is the number to count in the array
My suggestion, use a while or for loop ;-)
Not using a loop usually means handing the process over to some method that does use a loop.
Here is a way our loop hating coder can satisfy his loathing, at a price:
var a=[1, 2, 3, 5, 2, 8, 9, 2];
alert(String(a).replace(/[^2]+/g,'').length);
/* returned value: (Number)
3
*/
You can also repeatedly call indexOf, if it is available as an array method, and move the search pointer each time.
This does not create a new array, and the loop is faster than a forEach or filter.
It could make a difference if you have a million members to look at.
function countItems(arr, what){
var count= 0, i;
while((i= arr.indexOf(what, i))!= -1){
++count;
++i;
}
return count
}
countItems(a,2)
/* returned value: (Number)
3
*/
I'm a begin fan of js array's reduce function.
const myArray =[1, 2, 3, 5, 2, 8, 9, 2];
const count = myArray.reduce((count, num) => num === 2 ? count + 1 : count, 0)
In fact if you really want to get fancy you can create a count function on the Array prototype. Then you can reuse it.
Array.prototype.count = function(filterMethod) {
return this.reduce((count, item) => filterMethod(item)? count + 1 : count, 0);
}
Then do
const myArray =[1, 2, 3, 5, 2, 8, 9, 2]
const count = myArray.count(x => x==2)
Most of the posted solutions using array functions such as filter are incomplete because they aren't parameterized.
Here goes a solution with which the element to count can be set at run time.
function elementsCount(elementToFind, total, number){
return total += number==elementToFind;
}
var ar = [1, 2, 3, 5, 2, 8, 9, 2];
var elementToFind=2;
var result = ar.reduce(elementsCount.bind(this, elementToFind), 0);
The advantage of this approach is that could easily change the function to count for instance the number of elements greater than X.
You may also declare the reduce function inline
var ar = [1, 2, 3, 5, 2, 8, 9, 2];
var elementToFind=2;
var result = ar.reduce(function (elementToFind, total, number){
return total += number==elementToFind;
}.bind(this, elementToFind), 0);
Really, why would you need map or filter for this?
reduce was "born" for these kind of operations:
[1, 2, 3, 5, 2, 8, 9, 2].reduce( (count,2)=>count+(item==val), 0);
that's it! (if item==val in each iteration, then 1 will be added to the accumulator count, as true will resolve to 1).
As a function:
function countInArray(arr, val) {
return arr.reduce((count,item)=>count+(item==val),0)
}
Or, go ahead and extend your arrays:
Array.prototype.count = function(val) {
return this.reduce((count,item)=>count+(item==val),0)
}
It is better to wrap it into function:
let countNumber = (array,specificNumber) => {
return array.filter(n => n == specificNumber).length
}
countNumber([1,2,3,4,5],3) // returns 1
I use this:
function countElement(array, element) {
let tot = 0;
for(var el of array) {
if(el == element) {
tot++;
}
}
return tot;
}
var arr = ["a", "b", "a", "c", "d", "a", "e", "f", "a"];
console.log(countElement(arr, "a")); // 4
var arrayCount = [1,2,3,2,5,6,2,8];
var co = 0;
function findElement(){
arrayCount.find(function(value, index) {
if(value == 2)
co++;
});
console.log( 'found' + ' ' + co + ' element with value 2');
}
I would do something like that:
var arrayCount = [1,2,3,4,5,6,7,8];
function countarr(){
var dd = 0;
arrayCount.forEach( function(s){
dd++;
});
console.log(dd);
}
I believe what you are looking for is functional approach
const arr = ['a', 'a', 'b', 'g', 'a', 'e'];
const count = arr.filter(elem => elem === 'a').length;
console.log(count); // Prints 3
elem === 'a' is the condition, replace it with your own.
Array.prototype.count = function (v) {
var c = 0;
for (let i = 0; i < this.length; i++) {
if(this[i] === v){
c++;
}
}
return c;
}
var arr = [1, 2, 3, 5, 2, 8, 9, 2];
console.log(arr.count(2)); //3
Solution by recursion
function count(arr, value) {
if (arr.length === 1) {
return arr[0] === value ? 1 : 0;
} else {
return (arr.shift() === value ? 1 : 0) + count(arr, value);
}
}
count([1,2,2,3,4,5,2], 2); // 3
Create a new method for Array class in core level file and use it all over your project.
// say in app.js
Array.prototype.occurrence = function(val) {
return this.filter(e => e === val).length;
}
Use this anywhere in your project -
[1, 2, 4, 5, 2, 7, 2, 9].occurrence(2);
// above line returns 3
Here is a one liner in javascript.
Use map. Find the matching values (v === 2) in the array, returning an array of ones and zeros.
Use Reduce. Add all the values of the array for the total number found.
[1, 2, 3, 5, 2, 8, 9, 2]
.map(function(v) {
return v === 2 ? 1 : 0;
})
.reduce((a, b) => a + b, 0);
The result is 3.
Depending on how you want to run it:
const reduced = (array, val) => { // self explanatory
return array.filter((element) => element === val).length;
}
console.log(reduced([1, 2, 3, 5, 2, 8, 9, 2], 2));
// 3
const reducer = (array) => { // array to set > set.forEach > map.set
const count = new Map();
const values = new Set(array);
values.forEach((element)=> {
count.set(element, array.filter((arrayElement) => arrayElement === element).length);
});
return count;
}
console.log(reducer([1, 2, 3, 5, 2, 8, 9, 2]));
// Map(6) {1 => 1, 2 => 3, 3 => 1, 5 => 1, 8 => 1, …}
You can use built-in function Array.filter()
array.filter(x => x === element).length;
var arr = [1, 2, 3, 5, 2, 8, 9, 2];
// Count how many 2 there are in arr
var count = arr.filter(x => x === 2).length;
console.log(count);
One-liner function
const countBy = (a,f)=>a.reduce((p,v,i,x)=>p+!!f(v,i,x), 0)
countBy([1,2,3,4,5], v=>v%2===0) // 2
There are many ways to find out. I think the easiest way is to use the array filter method which is introduced in es6.
function itemCount(array, item) {
return array.filter(element => element === item).length
}
const myArray = [1,3,5,7,1,2,3,4,5,1,9,0,1]
const items = itemCount(myArray, 1)
console.log(items)
Something a little more generic and modern (in 2022):
import {pipe, count} from 'iter-ops';
const arr = [1, 2, 3, 5, 2, 8, 9, 2];
const n = pipe(arr, count(a => a === 2)).first; //=> 3
What's good about this:
It counts without creating a new array, so it is memory-efficient
It works the same for any Iterable and AsyncIterable
Another approach using RegExp
const list = [1, 2, 3, 5, 2, 8, 9, 2]
const d = 2;
const counter = (`${list.join()},`.match(new RegExp(`${d}\\,`, 'g')) || []).length
console.log(counter)
The Steps follows as below
Join the string using a comma Remember to append ',' after joining so as not to have incorrect values when value to be matched is at the end of the array
Match the number of occurrence of a combination between the digit and comma
Get length of matched items
I believe you can use the new Set array method of JavaScript to have unique values.
Example:
var arr = [1, 2, 3, 5, 2, 8, 9, 2]
var set = new Set(arr);
console.log(set);
// 1,2,3,5,8,9 . We get unique values as output.
You can use length property in JavaScript array:
var myarray = [];
var count = myarray.length;//return 0
myarray = [1,2];
count = myarray.length;//return 2
In Javascript, I'm trying to take an initial array of number values and count the elements inside it. Ideally, the result would be two new arrays, the first specifying each unique element, and the second containing the number of times each element occurs. However, I'm open to suggestions on the format of the output.
For example, if the initial array was:
5, 5, 5, 2, 2, 2, 2, 2, 9, 4
Then two new arrays would be created. The first would contain the name of each unique element:
5, 2, 9, 4
The second would contain the number of times that element occurred in the initial array:
3, 5, 1, 1
Because the number 5 occurs three times in the initial array, the number 2 occurs five times and 9 and 4 both appear once.
I've searched a lot for a solution, but nothing seems to work, and everything I've tried myself has wound up being ridiculously complex. Any help would be appreciated!
Thanks :)
You can use an object to hold the results:
const arr = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
const counts = {};
for (const num of arr) {
counts[num] = counts[num] ? counts[num] + 1 : 1;
}
console.log(counts);
console.log(counts[5], counts[2], counts[9], counts[4]);
So, now your counts object can tell you what the count is for a particular number:
console.log(counts[5]); // logs '3'
If you want to get an array of members, just use the keys() functions
keys(counts); // returns ["5", "2", "9", "4"]
const occurrences = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4].reduce(function (acc, curr) {
return acc[curr] ? ++acc[curr] : acc[curr] = 1, acc
}, {});
console.log(occurrences) // => {2: 5, 4: 1, 5: 3, 9: 1}
const arr = [2, 2, 5, 2, 2, 2, 4, 5, 5, 9];
function foo (array) {
let a = [],
b = [],
arr = [...array], // clone array so we don't change the original when using .sort()
prev;
arr.sort();
for (let element of arr) {
if (element !== prev) {
a.push(element);
b.push(1);
}
else ++b[b.length - 1];
prev = element;
}
return [a, b];
}
const result = foo(arr);
console.log('[' + result[0] + ']','[' + result[1] + ']')
console.log(arr)
One line ES6 solution. So many answers using object as a map but I can't see anyone using an actual Map
const map = arr.reduce((acc, e) => acc.set(e, (acc.get(e) || 0) + 1), new Map());
Use map.keys() to get unique elements
Use map.values() to get the occurrences
Use map.entries() to get the pairs [element, frequency]
var arr = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4]
const map = arr.reduce((acc, e) => acc.set(e, (acc.get(e) || 0) + 1), new Map());
console.info([...map.keys()])
console.info([...map.values()])
console.info([...map.entries()])
If using underscore or lodash, this is the simplest thing to do:
_.countBy(array);
Such that:
_.countBy([5, 5, 5, 2, 2, 2, 2, 2, 9, 4])
=> Object {2: 5, 4: 1, 5: 3, 9: 1}
As pointed out by others, you can then execute the _.keys() and _.values() functions on the result to get just the unique numbers, and their occurrences, respectively. But in my experience, the original object is much easier to deal with.
Don't use two arrays for the result, use an object:
a = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
result = { };
for(var i = 0; i < a.length; ++i) {
if(!result[a[i]])
result[a[i]] = 0;
++result[a[i]];
}
Then result will look like:
{
2: 5,
4: 1,
5: 3,
9: 1
}
How about an ECMAScript2015 option.
const a = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
const aCount = new Map([...new Set(a)].map(
x => [x, a.filter(y => y === x).length]
));
aCount.get(5) // 3
aCount.get(2) // 5
aCount.get(9) // 1
aCount.get(4) // 1
This example passes the input array to the Set constructor creating a collection of unique values. The spread syntax then expands these values into a new array so we can call map and translate this into a two-dimensional array of [value, count] pairs - i.e. the following structure:
Array [
[5, 3],
[2, 5],
[9, 1],
[4, 1]
]
The new array is then passed to the Map constructor resulting in an iterable object:
Map {
5 => 3,
2 => 5,
9 => 1,
4 => 1
}
The great thing about a Map object is that it preserves data-types - that is to say aCount.get(5) will return 3 but aCount.get("5") will return undefined. It also allows for any value / type to act as a key meaning this solution will also work with an array of objects.
function frequencies(/* {Array} */ a){
return new Map([...new Set(a)].map(
x => [x, a.filter(y => y === x).length]
));
}
let foo = { value: 'foo' },
bar = { value: 'bar' },
baz = { value: 'baz' };
let aNumbers = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4],
aObjects = [foo, bar, foo, foo, baz, bar];
frequencies(aNumbers).forEach((val, key) => console.log(key + ': ' + val));
frequencies(aObjects).forEach((val, key) => console.log(key.value + ': ' + val));
I think this is the simplest way how to count occurrences with same value in array.
var a = [true, false, false, false];
a.filter(function(value){
return value === false;
}).length
const data = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4]
function count(arr) {
return arr.reduce((prev, curr) => (prev[curr] = ++prev[curr] || 1, prev), {})
}
console.log(count(data))
2021's version
The more elegant way is using Logical nullish assignment (x ??= y) combined with Array#reduce() with O(n) time complexity.
The main idea is still using Array#reduce() to aggregate with output as object to get the highest performance (both time and space complexity) in terms of searching & construct bunches of intermediate arrays like other answers.
const arr = [2, 2, 2, 2, 2, 4, 5, 5, 5, 9];
const result = arr.reduce((acc, curr) => {
acc[curr] ??= {[curr]: 0};
acc[curr][curr]++;
return acc;
}, {});
console.log(Object.values(result));
Clean & Refactor code
Using Comma operator (,) syntax.
The comma operator (,) evaluates each of its operands (from left to
right) and returns the value of the last operand.
const arr = [2, 2, 2, 2, 2, 4, 5, 5, 5, 9];
const result = arr.reduce((acc, curr) => (acc[curr] = (acc[curr] || 0) + 1, acc), {});
console.log(result);
Output
{
"2": 5,
"4": 1,
"5": 3,
"9": 1
}
If you favour a single liner.
arr.reduce(function(countMap, word) {countMap[word] = ++countMap[word] || 1;return countMap}, {});
Edit (6/12/2015):
The Explanation from the inside out.
countMap is a map that maps a word with its frequency, which we can see the anonymous function. What reduce does is apply the function with arguments as all the array elements and countMap being passed as the return value of the last function call. The last parameter ({}) is the default value of countMap for the first function call.
ES6 version should be much simplifier (another one line solution)
let arr = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
let acc = arr.reduce((acc, val) => acc.set(val, 1 + (acc.get(val) || 0)), new Map());
console.log(acc);
// output: Map { 5 => 3, 2 => 5, 9 => 1, 4 => 1 }
A Map instead of plain Object helping us to distinguish different type of elements, or else all counting are base on strings
Edit 2020: this is a pretty old answer (nine years). Extending the native prototype will always generate discussion. Although I think the programmer is free to choose her own programming style, here's a (more modern) approach to the problem without extending Array.prototype:
{
// create array with some pseudo random values (1 - 5)
const arr = Array.from({length: 100})
.map( () => Math.floor(1 + Math.random() * 5) );
// frequencies using a reducer
const arrFrequencies = arr.reduce((acc, value) =>
({ ...acc, [value]: acc[value] + 1 || 1}), {} )
console.log(arrFrequencies);
console.log(`Value 4 occurs ${arrFrequencies[4]} times in arrFrequencies`);
// bonus: restore Array from frequencies
const arrRestored = Object.entries(arrFrequencies)
.reduce( (acc, [key, value]) => acc.concat(Array(value).fill(+key)), [] );
console.log(arrRestored.join());
}
.as-console-wrapper { top: 0; max-height: 100% !important; }
The old (2011) answer: you could extend Array.prototype, like this:
{
Array.prototype.frequencies = function() {
var l = this.length,
result = {
all: []
};
while (l--) {
result[this[l]] = result[this[l]] ? ++result[this[l]] : 1;
}
// all pairs (label, frequencies) to an array of arrays(2)
for (var l in result) {
if (result.hasOwnProperty(l) && l !== 'all') {
result.all.push([l, result[l]]);
}
}
return result;
};
var freqs = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4].frequencies();
console.log(`freqs[2]: ${freqs[2]}`); //=> 5
// or
var freqs = '1,1,2,one,one,2,2,22,three,four,five,three,three,five'
.split(',')
.frequencies();
console.log(`freqs.three: ${freqs.three}`); //=> 3
// Alternatively you can utilize Array.map:
Array.prototype.frequencies = function() {
var freqs = {
sum: 0
};
this.map(function(a) {
if (!(a in this)) {
this[a] = 1;
} else {
this[a] += 1;
}
this.sum += 1;
return a;
}, freqs);
return freqs;
}
}
.as-console-wrapper { top: 0; max-height: 100% !important; }
Based on answer of #adamse and #pmandell (which I upvote), in ES6 you can do it in one line:
2017 edit: I use || to reduce code size and make it more readable.
var a=[7,1,7,2,2,7,3,3,3,7,,7,7,7];
alert(JSON.stringify(
a.reduce((r,k)=>{r[k]=1+r[k]||1;return r},{})
));
It can be used to count characters:
var s="ABRACADABRA";
alert(JSON.stringify(
s.split('').reduce((a, c)=>{a[c]++?0:a[c]=1;return a},{})
));
A shorter version using reduce and tilde (~) operator.
const data = [2, 2, 2, 2, 2, 4, 5, 5, 5, 9];
function freq(nums) {
return nums.reduce((acc, curr) => {
acc[curr] = -~acc[curr];
return acc;
}, {});
}
console.log(freq(data));
If you are using underscore you can go the functional route
a = ['foo', 'foo', 'bar'];
var results = _.reduce(a,function(counts,key){ counts[key]++; return counts },
_.object( _.map( _.uniq(a), function(key) { return [key, 0] })))
so your first array is
_.keys(results)
and the second array is
_.values(results)
most of this will default to native javascript functions if they are available
demo : http://jsfiddle.net/dAaUU/
So here's how I'd do it with some of the newest javascript features:
First, reduce the array to a Map of the counts:
let countMap = array.reduce(
(map, value) => {map.set(value, (map.get(value) || 0) + 1); return map},
new Map()
)
By using a Map, your starting array can contain any type of object, and the counts will be correct. Without a Map, some types of objects will give you strange counts.
See the Map docs for more info on the differences.
This could also be done with an object if all your values are symbols, numbers, or strings:
let countObject = array.reduce(
(map, value) => { map[value] = (map[value] || 0) + 1; return map },
{}
)
Or slightly fancier in a functional way without mutation, using destructuring and object spread syntax:
let countObject = array.reduce(
(value, {[value]: count = 0, ...rest}) => ({ [value]: count + 1, ...rest }),
{}
)
At this point, you can use the Map or object for your counts (and the map is directly iterable, unlike an object), or convert it to two arrays.
For the Map:
countMap.forEach((count, value) => console.log(`value: ${value}, count: ${count}`)
let values = countMap.keys()
let counts = countMap.values()
Or for the object:
Object
.entries(countObject) // convert to array of [key, valueAtKey] pairs
.forEach(([value, count]) => console.log(`value: ${value}, count: ${count}`)
let values = Object.keys(countObject)
let counts = Object.values(countObject)
var array = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
function countDuplicates(obj, num){
obj[num] = (++obj[num] || 1);
return obj;
}
var answer = array.reduce(countDuplicates, {});
// answer => {2:5, 4:1, 5:3, 9:1};
If you still want two arrays, then you could use answer like this...
var uniqueNums = Object.keys(answer);
// uniqueNums => ["2", "4", "5", "9"];
var countOfNums = Object.keys(answer).map(key => answer[key]);
// countOfNums => [5, 1, 3, 1];
Or if you want uniqueNums to be numbers
var uniqueNums = Object.keys(answer).map(key => +key);
// uniqueNums => [2, 4, 5, 9];
Here's just something light and easy for the eyes...
function count(a,i){
var result = 0;
for(var o in a)
if(a[o] == i)
result++;
return result;
}
Edit: And since you want all the occurences...
function count(a){
var result = {};
for(var i in a){
if(result[a[i]] == undefined) result[a[i]] = 0;
result[a[i]]++;
}
return result;
}
Solution using a map with O(n) time complexity.
var arr = [2, 2, 2, 2, 2, 4, 5, 5, 5, 9];
const countOccurrences = (arr) => {
const map = {};
for ( var i = 0; i < arr.length; i++ ) {
map[arr[i]] = ~~map[arr[i]] + 1;
}
return map;
}
Demo: http://jsfiddle.net/simevidas/bnACW/
There is a much better and easy way that we can do this using ramda.js.
Code sample here
const ary = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
R.countBy(r=> r)(ary)
countBy documentation is at documentation
I know this question is old but I realized there are too few solutions where you get the count array as asked with a minimal code so here is mine
// The initial array we want to count occurences
var initial = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
// The count array asked for
var count = Array.from(new Set(initial)).map(val => initial.filter(v => v === val).length);
// Outputs [ 3, 5, 1, 1 ]
Beside you can get the set from that initial array with
var set = Array.from(new Set(initial));
//set = [5, 2, 9, 4]
My solution with ramda:
const testArray = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4]
const counfFrequency = R.compose(
R.map(R.length),
R.groupBy(R.identity),
)
counfFrequency(testArray)
Link to REPL.
Using MAP you can have 2 arrays in the output: One containing the occurrences & the other one is containing the number of occurrences.
const dataset = [2,2,4,2,6,4,7,8,5,6,7,10,10,10,15];
let values = [];
let keys = [];
var mapWithOccurences = dataset.reduce((a,c) => {
if(a.has(c)) a.set(c,a.get(c)+1);
else a.set(c,1);
return a;
}, new Map())
.forEach((value, key, map) => {
keys.push(key);
values.push(value);
});
console.log(keys)
console.log(values)
This question is more than 8 years old and many, many answers do not really take ES6 and its numerous advantages into account.
Perhaps is even more important to think about the consequences of our code for garbage collection/memory management whenever we create additional arrays, make double or triple copies of arrays or even convert arrays into objects. These are trivial observations for small applications but if scale is a long term objective then think about these, thoroughly.
If you just need a "counter" for specific data types and the starting point is an array (I assume you want therefore an ordered list and take advantage of the many properties and methods arrays offer), you can just simply iterate through array1 and populate array2 with the values and number of occurrences for these values found in array1.
As simple as that.
Example of simple class SimpleCounter (ES6) for Object Oriented Programming and Object Oriented Design
class SimpleCounter {
constructor(rawList){ // input array type
this.rawList = rawList;
this.finalList = [];
}
mapValues(){ // returns a new array
this.rawList.forEach(value => {
this.finalList[value] ? this.finalList[value]++ : this.finalList[value] = 1;
});
this.rawList = null; // remove array1 for garbage collection
return this.finalList;
}
}
module.exports = SimpleCounter;
Using Lodash
const values = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
const frequency = _.map(_.groupBy(values), val => ({ value: val[0], frequency: val.length }));
console.log(frequency);
<script src="https://cdnjs.cloudflare.com/ajax/libs/lodash.js/4.17.15/lodash.min.js"></script>
To return an array which is then sortable:
let array = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4]
let reducedArray = array.reduce( (acc, curr, _, arr) => {
if (acc.length == 0) acc.push({item: curr, count: 1})
else if (acc.findIndex(f => f.item === curr ) === -1) acc.push({item: curr, count: 1})
else ++acc[acc.findIndex(f => f.item === curr)].count
return acc
}, []);
console.log(reducedArray.sort((a,b) => b.count - a.count ))
/*
Output:
[
{
"item": 2,
"count": 5
},
{
"item": 5,
"count": 3
},
{
"item": 9,
"count": 1
},
{
"item": 4,
"count": 1
}
]
*/
Check out the code below.
<html>
<head>
<script>
// array with values
var ar = [5, 5, 5, 2, 2, 2, 2, 2, 9, 4];
var Unique = []; // we'll store a list of unique values in here
var Counts = []; // we'll store the number of occurances in here
for(var i in ar)
{
var Index = ar[i];
Unique[Index] = ar[i];
if(typeof(Counts[Index])=='undefined')
Counts[Index]=1;
else
Counts[Index]++;
}
// remove empty items
Unique = Unique.filter(function(){ return true});
Counts = Counts.filter(function(){ return true});
alert(ar.join(','));
alert(Unique.join(','));
alert(Counts.join(','));
var a=[];
for(var i=0; i<Unique.length; i++)
{
a.push(Unique[i] + ':' + Counts[i] + 'x');
}
alert(a.join(', '));
</script>
</head>
<body>
</body>
</html>
function countOcurrences(arr){
return arr.reduce((aggregator, value, index, array) => {
if(!aggregator[value]){
return aggregator = {...aggregator, [value]: 1};
}else{
return aggregator = {...aggregator, [value]:++aggregator[value]};
}
}, {})
}
You can simplify this a bit by extending your arrays with a count function. It works similar to Ruby’s Array#count, if you’re familiar with it.
Array.prototype.count = function(obj){
var count = this.length;
if(typeof(obj) !== "undefined"){
var array = this.slice(0), count = 0; // clone array and reset count
for(i = 0; i < array.length; i++){
if(array[i] == obj){ count++ }
}
}
return count;
}
Usage:
let array = ['a', 'b', 'd', 'a', 'c'];
array.count('a'); // => 2
array.count('b'); // => 1
array.count('e'); // => 0
array.count(); // => 5
Gist
Edit
You can then get your first array, with each occurred item, using Array#filter:
let occurred = [];
array.filter(function(item) {
if (!occurred.includes(item)) {
occurred.push(item);
return true;
}
}); // => ["a", "b", "d", "c"]
And your second array, with the number of occurrences, using Array#count into Array#map:
occurred.map(array.count.bind(array)); // => [2, 1, 1, 1]
Alternatively, if order is irrelevant, you can just return it as a key-value pair:
let occurrences = {}
occurred.forEach(function(item) { occurrences[item] = array.count(item) });
occurences; // => {2: 5, 4: 1, 5: 3, 9: 1}