Develop Reference

Is returning a promise the same as using the await keyword? [duplicate]

Given the code samples below, is there any difference in behavior, and, if so, what are those differences?
return await promise
async function delay1Second() {
return (await delay(1000));
}
return promise
async function delay1Second() {
return delay(1000);
}
As I understand it, the first would have error-handling within the async function, and errors would bubble out of the async function's Promise. However, the second would require one less tick. Is this correct?
This snippet is just a common function to return a Promise for reference.
function delay(ms) {
return new Promise((resolve) => {
setTimeout(resolve, ms);
});
}

Most of the time, there is no observable difference between return and return await. Both versions of delay1Second have the exact same observable behavior (but depending on the implementation, the return await version might use slightly more memory because an intermediate Promise object might be created).
However, as #PitaJ pointed out, there is one case where there is a difference: if the return or return await is nested in a try-catch block. Consider this example
async function rejectionWithReturnAwait () {
try {
return await Promise.reject(new Error())
} catch (e) {
return 'Saved!'
}
}
async function rejectionWithReturn () {
try {
return Promise.reject(new Error())
} catch (e) {
return 'Saved!'
}
}
In the first version, the async function awaits the rejected promise before returning its result, which causes the rejection to be turned into an exception and the catch clause to be reached; the function will thus return a promise resolving to the string "Saved!".
The second version of the function, however, does return the rejected promise directly without awaiting it within the async function, which means that the catch case is not called and the caller gets the rejection instead.

As other answers mentioned, there is likely a slight performance benefit when letting the promise bubble up by returning it directly — simply because you don’t have to await the result first and then wrap it with another promise again. However, no one has talked about tail call optimization yet.
Tail call optimization, or “proper tail calls”, is a technique that the interpreter uses to optimize the call stack. Currently, not many runtimes support it yet — even though it’s technically part of the ES6 Standard — but it’s possible support might be added in the future, so you can prepare for that by writing good code in the present.
In a nutshell, TCO (or PTC) optimizes the call stack by not opening a new frame for a function that is directly returned by another function. Instead, it reuses the same frame.
async function delay1Second() {
return delay(1000);
}
Since delay() is directly returned by delay1Second(), runtimes supporting PTC will first open a frame for delay1Second() (the outer function), but then instead of opening another frame for delay() (the inner function), it will just reuse the same frame that was opened for the outer function. This optimizes the stack because it can prevent a stack overflow (hehe) with very large recursive functions, e.g., fibonacci(5e+25). Essentially it becomes a loop, which is much faster.
PTC is only enabled when the inner function is directly returned. It’s not used when the result of the function is altered before it is returned, for example, if you had return (delay(1000) || null), or return await delay(1000).
But like I said, most runtimes and browsers don’t support PTC yet, so it probably doesn’t make a huge difference now, but it couldn’t hurt to future-proof your code.
Read more in this question: Node.js: Are there optimizations for tail calls in async functions?

Noticeable difference: Promise rejection gets handled at different places
return somePromise will pass somePromise to the call site, and await somePromise to settle at call site (if there is any). Therefore, if somePromise is rejected, it will not be handled by the local catch block, but the call site's catch block.
async function foo () {
try {
return Promise.reject();
} catch (e) {
console.log('IN');
}
}
(async function main () {
try {
let a = await foo();
} catch (e) {
console.log('OUT');
}
})();
// 'OUT'
return await somePromise will first await somePromise to settle locally. Therefore, the value or Exception will first be handled locally. => Local catch block will be executed if somePromise is rejected.
async function foo () {
try {
return await Promise.reject();
} catch (e) {
console.log('IN');
}
}
(async function main () {
try {
let a = await foo();
} catch (e) {
console.log('OUT');
}
})();
// 'IN'
Reason: return await Promise awaits both locally and outside, return Promise awaits only outside
Detailed Steps:
return Promise
async function delay1Second() {
return delay(1000);
}
call delay1Second();
const result = await delay1Second();
Inside delay1Second(), function delay(1000) returns a promise immediately with [[PromiseStatus]]: 'pending. Let's call it delayPromise.
async function delay1Second() {
return delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
}
Async functions will wrap their return value inside Promise.resolve()(Source). Because delay1Second is an async function, we have:
const result = await Promise.resolve(delayPromise);
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
Promise.resolve(delayPromise) returns delayPromise without doing anything because the input is already a promise (see MDN Promise.resolve):
const result = await delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
await waits until the delayPromise is settled.
IF delayPromise is fulfilled with PromiseValue=1:
const result = 1;
ELSE is delayPromise is rejected:
// jump to catch block if there is any
return await Promise
async function delay1Second() {
return await delay(1000);
}
call delay1Second();
const result = await delay1Second();
Inside delay1Second(), function delay(1000) returns a promise immediately with [[PromiseStatus]]: 'pending. Let's call it delayPromise.
async function delay1Second() {
return await delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
}
Local await will wait until delayPromise gets settled.
Case 1: delayPromise is fulfilled with PromiseValue=1:
async function delay1Second() {
return 1;
}
const result = await Promise.resolve(1); // let's call it "newPromise"
const result = await newPromise;
// newPromise.[[PromiseStatus]]: 'resolved'
// newPromise.[[PromiseValue]]: 1
const result = 1;
Case 2: delayPromise is rejected:
// jump to catch block inside `delay1Second` if there is any
// let's say a value -1 is returned in the end
const result = await Promise.resolve(-1); // call it newPromise
const result = await newPromise;
// newPromise.[[PromiseStatus]]: 'resolved'
// newPromise.[[PromiseValue]]: -1
const result = -1;
Glossary:
Settle: Promise.[[PromiseStatus]] changes from pending to resolved or rejected

This is a hard question to answer, because it depends in practice on how your transpiler (probably babel) actually renders async/await. The things that are clear regardless:
Both implementations should behave the same, though the first implementation may have one less Promise in the chain.
Especially if you drop the unnecessary await, the second version would not require any extra code from the transpiler, while the first one does.
So from a code performance and debugging perspective, the second version is preferable, though only very slightly so, while the first version has a slight legibility benefit, in that it clearly indicates that it returns a promise.

In our project, we decided to always use 'return await'.
The argument is that "the risk of forgetting to add the 'await' when later on a try-catch block is put around the return expression justifies having the redundant 'await' now."

Here is a typescript example that you can run and convince yourself that you need that "return await"
async function test() {
try {
return await throwErr(); // this is correct
// return throwErr(); // this will prevent inner catch to ever to be reached
}
catch (err) {
console.log("inner catch is reached")
return
}
}
const throwErr = async () => {
throw("Fake error")
}
void test().then(() => {
console.log("done")
}).catch(e => {
console.log("outer catch is reached")
});

here i leave some code practical for you can undertand it the diferrence
let x = async function () {
return new Promise((res, rej) => {
setTimeout(async function () {
console.log("finished 1");
return await new Promise((resolve, reject) => { // delete the return and you will see the difference
setTimeout(function () {
resolve("woo2");
console.log("finished 2");
}, 5000);
});
res("woo1");
}, 3000);
});
};
(async function () {
var counter = 0;
const a = setInterval(function () { // counter for every second, this is just to see the precision and understand the code
if (counter == 7) {
clearInterval(a);
}
console.log(counter);
counter = counter + 1;
}, 1000);
console.time("time1");
console.log("hello i starting first of all");
await x();
console.log("more code...");
console.timeEnd("time1");
})();
the function "x" just is a function async than it have other fucn
if will delete the return it print "more code..."
the variable x is just an asynchronous function that in turn has another asynchronous function, in the main of the code we invoke a wait to call the function of the variable x, when it completes it follows the sequence of the code, that would be normal for "async / await ", but inside the x function there is another asynchronous function, and this returns a promise or returns a" promise "it will stay inside the x function, forgetting the main code, that is, it will not print the" console.log ("more code .. "), on the other hand if we put" await "it will wait for every function that completes and finally follows the normal sequence of the main code.
below the "console.log (" finished 1 "delete the" return ", you will see the behavior.

How to properly use async/await within function? [duplicate]

Given the code samples below, is there any difference in behavior, and, if so, what are those differences?
return await promise
async function delay1Second() {
return (await delay(1000));
}
return promise
async function delay1Second() {
return delay(1000);
}
As I understand it, the first would have error-handling within the async function, and errors would bubble out of the async function's Promise. However, the second would require one less tick. Is this correct?
This snippet is just a common function to return a Promise for reference.
function delay(ms) {
return new Promise((resolve) => {
setTimeout(resolve, ms);
});
}

Most of the time, there is no observable difference between return and return await. Both versions of delay1Second have the exact same observable behavior (but depending on the implementation, the return await version might use slightly more memory because an intermediate Promise object might be created).
However, as #PitaJ pointed out, there is one case where there is a difference: if the return or return await is nested in a try-catch block. Consider this example
async function rejectionWithReturnAwait () {
try {
return await Promise.reject(new Error())
} catch (e) {
return 'Saved!'
}
}
async function rejectionWithReturn () {
try {
return Promise.reject(new Error())
} catch (e) {
return 'Saved!'
}
}
In the first version, the async function awaits the rejected promise before returning its result, which causes the rejection to be turned into an exception and the catch clause to be reached; the function will thus return a promise resolving to the string "Saved!".
The second version of the function, however, does return the rejected promise directly without awaiting it within the async function, which means that the catch case is not called and the caller gets the rejection instead.

As other answers mentioned, there is likely a slight performance benefit when letting the promise bubble up by returning it directly — simply because you don’t have to await the result first and then wrap it with another promise again. However, no one has talked about tail call optimization yet.
Tail call optimization, or “proper tail calls”, is a technique that the interpreter uses to optimize the call stack. Currently, not many runtimes support it yet — even though it’s technically part of the ES6 Standard — but it’s possible support might be added in the future, so you can prepare for that by writing good code in the present.
In a nutshell, TCO (or PTC) optimizes the call stack by not opening a new frame for a function that is directly returned by another function. Instead, it reuses the same frame.
async function delay1Second() {
return delay(1000);
}
Since delay() is directly returned by delay1Second(), runtimes supporting PTC will first open a frame for delay1Second() (the outer function), but then instead of opening another frame for delay() (the inner function), it will just reuse the same frame that was opened for the outer function. This optimizes the stack because it can prevent a stack overflow (hehe) with very large recursive functions, e.g., fibonacci(5e+25). Essentially it becomes a loop, which is much faster.
PTC is only enabled when the inner function is directly returned. It’s not used when the result of the function is altered before it is returned, for example, if you had return (delay(1000) || null), or return await delay(1000).
But like I said, most runtimes and browsers don’t support PTC yet, so it probably doesn’t make a huge difference now, but it couldn’t hurt to future-proof your code.
Read more in this question: Node.js: Are there optimizations for tail calls in async functions?

Noticeable difference: Promise rejection gets handled at different places
return somePromise will pass somePromise to the call site, and await somePromise to settle at call site (if there is any). Therefore, if somePromise is rejected, it will not be handled by the local catch block, but the call site's catch block.
async function foo () {
try {
return Promise.reject();
} catch (e) {
console.log('IN');
}
}
(async function main () {
try {
let a = await foo();
} catch (e) {
console.log('OUT');
}
})();
// 'OUT'
return await somePromise will first await somePromise to settle locally. Therefore, the value or Exception will first be handled locally. => Local catch block will be executed if somePromise is rejected.
async function foo () {
try {
return await Promise.reject();
} catch (e) {
console.log('IN');
}
}
(async function main () {
try {
let a = await foo();
} catch (e) {
console.log('OUT');
}
})();
// 'IN'
Reason: return await Promise awaits both locally and outside, return Promise awaits only outside
Detailed Steps:
return Promise
async function delay1Second() {
return delay(1000);
}
call delay1Second();
const result = await delay1Second();
Inside delay1Second(), function delay(1000) returns a promise immediately with [[PromiseStatus]]: 'pending. Let's call it delayPromise.
async function delay1Second() {
return delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
}
Async functions will wrap their return value inside Promise.resolve()(Source). Because delay1Second is an async function, we have:
const result = await Promise.resolve(delayPromise);
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
Promise.resolve(delayPromise) returns delayPromise without doing anything because the input is already a promise (see MDN Promise.resolve):
const result = await delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
await waits until the delayPromise is settled.
IF delayPromise is fulfilled with PromiseValue=1:
const result = 1;
ELSE is delayPromise is rejected:
// jump to catch block if there is any
return await Promise
async function delay1Second() {
return await delay(1000);
}
call delay1Second();
const result = await delay1Second();
Inside delay1Second(), function delay(1000) returns a promise immediately with [[PromiseStatus]]: 'pending. Let's call it delayPromise.
async function delay1Second() {
return await delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
}
Local await will wait until delayPromise gets settled.
Case 1: delayPromise is fulfilled with PromiseValue=1:
async function delay1Second() {
return 1;
}
const result = await Promise.resolve(1); // let's call it "newPromise"
const result = await newPromise;
// newPromise.[[PromiseStatus]]: 'resolved'
// newPromise.[[PromiseValue]]: 1
const result = 1;
Case 2: delayPromise is rejected:
// jump to catch block inside `delay1Second` if there is any
// let's say a value -1 is returned in the end
const result = await Promise.resolve(-1); // call it newPromise
const result = await newPromise;
// newPromise.[[PromiseStatus]]: 'resolved'
// newPromise.[[PromiseValue]]: -1
const result = -1;
Glossary:
Settle: Promise.[[PromiseStatus]] changes from pending to resolved or rejected

This is a hard question to answer, because it depends in practice on how your transpiler (probably babel) actually renders async/await. The things that are clear regardless:
Both implementations should behave the same, though the first implementation may have one less Promise in the chain.
Especially if you drop the unnecessary await, the second version would not require any extra code from the transpiler, while the first one does.
So from a code performance and debugging perspective, the second version is preferable, though only very slightly so, while the first version has a slight legibility benefit, in that it clearly indicates that it returns a promise.

In our project, we decided to always use 'return await'.
The argument is that "the risk of forgetting to add the 'await' when later on a try-catch block is put around the return expression justifies having the redundant 'await' now."

Here is a typescript example that you can run and convince yourself that you need that "return await"
async function test() {
try {
return await throwErr(); // this is correct
// return throwErr(); // this will prevent inner catch to ever to be reached
}
catch (err) {
console.log("inner catch is reached")
return
}
}
const throwErr = async () => {
throw("Fake error")
}
void test().then(() => {
console.log("done")
}).catch(e => {
console.log("outer catch is reached")
});

here i leave some code practical for you can undertand it the diferrence
let x = async function () {
return new Promise((res, rej) => {
setTimeout(async function () {
console.log("finished 1");
return await new Promise((resolve, reject) => { // delete the return and you will see the difference
setTimeout(function () {
resolve("woo2");
console.log("finished 2");
}, 5000);
});
res("woo1");
}, 3000);
});
};
(async function () {
var counter = 0;
const a = setInterval(function () { // counter for every second, this is just to see the precision and understand the code
if (counter == 7) {
clearInterval(a);
}
console.log(counter);
counter = counter + 1;
}, 1000);
console.time("time1");
console.log("hello i starting first of all");
await x();
console.log("more code...");
console.timeEnd("time1");
})();
the function "x" just is a function async than it have other fucn
if will delete the return it print "more code..."
the variable x is just an asynchronous function that in turn has another asynchronous function, in the main of the code we invoke a wait to call the function of the variable x, when it completes it follows the sequence of the code, that would be normal for "async / await ", but inside the x function there is another asynchronous function, and this returns a promise or returns a" promise "it will stay inside the x function, forgetting the main code, that is, it will not print the" console.log ("more code .. "), on the other hand if we put" await "it will wait for every function that completes and finally follows the normal sequence of the main code.
below the "console.log (" finished 1 "delete the" return ", you will see the behavior.

Despite Await the function is being executed instantly

I am new to Javascript and am facing trouble dealing with Async/Await. Here is my code, as per my understanding adding await puts on hold the function
Here, inside foo, it should put on hold the code at checker() and move to running the commands outside foo, but instead it executes the checker() function before console.log('the end').
function checker() {
console.log('inside checker');
return "Ok"
}
async function foo() {
let a = await checker(); // Shouldn't using await here let next line outside foo to execute
console.log("mid", a);
}
console.log(1);
foo();
console.log('the end');
// Output coming is:
//1
//inside checker
//the end
//mid Ok
Can someone please tell me what properties are making it to behave this way. I know there's something that I am missing but can't figure out what.

Your checker function is not asynchronous, but you also need to do something that is actually async within it.
At the moment, all of the promises are instantly resolved which provides no opportunity for later code to run.
We need to actually create a promise, merely defining a function as async isn't enough unless something inside is returning a promise, so we return a new promise which is resolved by the setTimeout callback.
Note that the timeout period is 0 which is enough to cause the javascript event loop to be invoked, which allows the next statement(s) after calling foo to be processed. Changing this to any positive integer will change the execution time but not the order of events.
function checker() {
return new Promise(resolve => {
setTimeout(() => resolve('Ok'), 0)
})
}
function foo() {
let a = checker();
console.log(new Date(), "mid");
return a
}
(async () => {
console.log(new Date(), 'start');
foo().then(v => console.log(new Date(), 'eventually', v));
console.log(new Date(), 'the end');
})()

You didn't define your function as async
function checker() {
console.log('inside checker');
return "Ok"
}
It should be
async function checker() {
console.log('inside checker');
return "Ok"
}

await tells your code to wait for the function to finish. If you want to continue running without waiting, then you shouldn't use the await keyword. async also needs to be on the function that you want to run asynchronously, in this case checker()
async function checker() {
console.log('inside checker');
return "Ok"
}
function foo() {
let a = checker();
console.log("mid", a);
}
console.log(1);
foo();
console.log('the end');

foo is an async function, ie the code inside it will wait if you use the await keyword
But the foo function returns a promise. so if you want to wait for foo either use
await foo();
or use
foo().then(() => { console.log('the end'); })

Why does this loop repeat each iteration twice?

The function below prints each number twice. Could someone explain how it works? I tried debugging but all I can see is that the value of i only increases on every second iteration.
async function run(then) {
for (let i = 1; i <= 10; i++) {
console.log(i);
then = await { then };
}
}
run(run);
Concretely speaking, there are two things I don't understand.
Why does i not increase on every single iteration?
What does then = await { then }; exactly do? My first guess was that it would wait for a nested async call to run to finish before moving on to the next iteration, but this does not seem to be the case.

We can make this a bit clearer with minor re-write to include logging:
async function run(callback) {
let then = callback;
for (let i = 1; i <= 10; i++) {
console.log(callback === run ? "A" : "B", i);
then = await { then };
}
}
run(run);
.as-console-wrapper { max-height: 100% !important; }
This shows there are actually two loops started. For simplicity just called A and B. They log and await which means that their logs interleave and lead to A 1, B 1, A 2, B 2, etc.
This happens because of the first statement: run(run). Which passes the same function as a callback to itself. This does not call the callback but it is the first step to unravelling this.
The next step to understanding what is happening is await. You can await any value and in most cases if it's not a promise, it doesn't matter. If you have await 42; it just pretends the value was Promise.resolve(42) and continues the operation immediately with the next tick. That is true for most non-promises. The only exception is thenables - objects which have a .then() method.
When a thenable is awaited, its then() method is called:
const thenable = {
then() {
console.log("called");
}
};
(async () => {
await thenable;
})()
Which then explains the await { then } statement. This uses the shorthand for { then: then } where then is the callback passed to run. Thus it creates a thenable object which, when awaited, will execute the callback.
This means that the first time run() is executed and on the first iteration of the loop A the code is effectively await { then: run } which will execute run again which then starts loop B.
The value of then is overridden each time, hence why it only ever runs two loops in parallel, rather than more.
There is more to thenables that is relevant to fully grasp this code. I showed a simple one before which just shows that awaiting it calls the method. However, in reality await thenable will call .then() with two parameters - functions that can be called for success and failure. In the same way that the Promise constructor does it.
const badThenable = {
then() {
console.log("bad called");
}
};
(async () => {
await badThenable;
console.log("never reached");
})();
const goodThenable = {
then(resolve, reject) { //two callbacks
console.log("good called");
resolve(); //at least one needs to be called
}
};
(async () => {
await goodThenable;
console.log("correctly reached");
})();
This is relevant because run() expects a callback and when the await { then: run } executes it calls run(builtInResolveFunction) which then gets passed to the next await { then: builtInResolveFunction } which in turn resolves causes the a await to resolve.
With all this aside, the interleaved logging is just a factor of how tasks resolve:
(async () => {
for (let i = 1; i <= 10; i++){
console.log("A", i);
await Promise.resolve("just to force a minimal wait");
}
})();
(async () => {
for (let i = 1; i <= 10; i++) {
console.log("B", i);
await Promise.resolve("just to force a minimal wait");
}
})();
If there are two async functions running and there is nothing to really wait for:
One would run until it reaches an await and will then be suspended.
The other would run until it reaches an await and will then be suspended.
Repeat 1. and 2. until there are no more awaits.

Difference between `return await promise` and `return promise`

Given the code samples below, is there any difference in behavior, and, if so, what are those differences?
return await promise
async function delay1Second() {
return (await delay(1000));
}
return promise
async function delay1Second() {
return delay(1000);
}
As I understand it, the first would have error-handling within the async function, and errors would bubble out of the async function's Promise. However, the second would require one less tick. Is this correct?
This snippet is just a common function to return a Promise for reference.
function delay(ms) {
return new Promise((resolve) => {
setTimeout(resolve, ms);
});
}

Most of the time, there is no observable difference between return and return await. Both versions of delay1Second have the exact same observable behavior (but depending on the implementation, the return await version might use slightly more memory because an intermediate Promise object might be created).
However, as #PitaJ pointed out, there is one case where there is a difference: if the return or return await is nested in a try-catch block. Consider this example
async function rejectionWithReturnAwait () {
try {
return await Promise.reject(new Error())
} catch (e) {
return 'Saved!'
}
}
async function rejectionWithReturn () {
try {
return Promise.reject(new Error())
} catch (e) {
return 'Saved!'
}
}
In the first version, the async function awaits the rejected promise before returning its result, which causes the rejection to be turned into an exception and the catch clause to be reached; the function will thus return a promise resolving to the string "Saved!".
The second version of the function, however, does return the rejected promise directly without awaiting it within the async function, which means that the catch case is not called and the caller gets the rejection instead.

As other answers mentioned, there is likely a slight performance benefit when letting the promise bubble up by returning it directly — simply because you don’t have to await the result first and then wrap it with another promise again. However, no one has talked about tail call optimization yet.
Tail call optimization, or “proper tail calls”, is a technique that the interpreter uses to optimize the call stack. Currently, not many runtimes support it yet — even though it’s technically part of the ES6 Standard — but it’s possible support might be added in the future, so you can prepare for that by writing good code in the present.
In a nutshell, TCO (or PTC) optimizes the call stack by not opening a new frame for a function that is directly returned by another function. Instead, it reuses the same frame.
async function delay1Second() {
return delay(1000);
}
Since delay() is directly returned by delay1Second(), runtimes supporting PTC will first open a frame for delay1Second() (the outer function), but then instead of opening another frame for delay() (the inner function), it will just reuse the same frame that was opened for the outer function. This optimizes the stack because it can prevent a stack overflow (hehe) with very large recursive functions, e.g., fibonacci(5e+25). Essentially it becomes a loop, which is much faster.
PTC is only enabled when the inner function is directly returned. It’s not used when the result of the function is altered before it is returned, for example, if you had return (delay(1000) || null), or return await delay(1000).
But like I said, most runtimes and browsers don’t support PTC yet, so it probably doesn’t make a huge difference now, but it couldn’t hurt to future-proof your code.
Read more in this question: Node.js: Are there optimizations for tail calls in async functions?

Noticeable difference: Promise rejection gets handled at different places
return somePromise will pass somePromise to the call site, and await somePromise to settle at call site (if there is any). Therefore, if somePromise is rejected, it will not be handled by the local catch block, but the call site's catch block.
async function foo () {
try {
return Promise.reject();
} catch (e) {
console.log('IN');
}
}
(async function main () {
try {
let a = await foo();
} catch (e) {
console.log('OUT');
}
})();
// 'OUT'
return await somePromise will first await somePromise to settle locally. Therefore, the value or Exception will first be handled locally. => Local catch block will be executed if somePromise is rejected.
async function foo () {
try {
return await Promise.reject();
} catch (e) {
console.log('IN');
}
}
(async function main () {
try {
let a = await foo();
} catch (e) {
console.log('OUT');
}
})();
// 'IN'
Reason: return await Promise awaits both locally and outside, return Promise awaits only outside
Detailed Steps:
return Promise
async function delay1Second() {
return delay(1000);
}
call delay1Second();
const result = await delay1Second();
Inside delay1Second(), function delay(1000) returns a promise immediately with [[PromiseStatus]]: 'pending. Let's call it delayPromise.
async function delay1Second() {
return delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
}
Async functions will wrap their return value inside Promise.resolve()(Source). Because delay1Second is an async function, we have:
const result = await Promise.resolve(delayPromise);
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
Promise.resolve(delayPromise) returns delayPromise without doing anything because the input is already a promise (see MDN Promise.resolve):
const result = await delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
await waits until the delayPromise is settled.
IF delayPromise is fulfilled with PromiseValue=1:
const result = 1;
ELSE is delayPromise is rejected:
// jump to catch block if there is any
return await Promise
async function delay1Second() {
return await delay(1000);
}
call delay1Second();
const result = await delay1Second();
Inside delay1Second(), function delay(1000) returns a promise immediately with [[PromiseStatus]]: 'pending. Let's call it delayPromise.
async function delay1Second() {
return await delayPromise;
// delayPromise.[[PromiseStatus]]: 'pending'
// delayPromise.[[PromiseValue]]: undefined
}
Local await will wait until delayPromise gets settled.
Case 1: delayPromise is fulfilled with PromiseValue=1:
async function delay1Second() {
return 1;
}
const result = await Promise.resolve(1); // let's call it "newPromise"
const result = await newPromise;
// newPromise.[[PromiseStatus]]: 'resolved'
// newPromise.[[PromiseValue]]: 1
const result = 1;
Case 2: delayPromise is rejected:
// jump to catch block inside `delay1Second` if there is any
// let's say a value -1 is returned in the end
const result = await Promise.resolve(-1); // call it newPromise
const result = await newPromise;
// newPromise.[[PromiseStatus]]: 'resolved'
// newPromise.[[PromiseValue]]: -1
const result = -1;
Glossary:
Settle: Promise.[[PromiseStatus]] changes from pending to resolved or rejected

This is a hard question to answer, because it depends in practice on how your transpiler (probably babel) actually renders async/await. The things that are clear regardless:
Both implementations should behave the same, though the first implementation may have one less Promise in the chain.
Especially if you drop the unnecessary await, the second version would not require any extra code from the transpiler, while the first one does.
So from a code performance and debugging perspective, the second version is preferable, though only very slightly so, while the first version has a slight legibility benefit, in that it clearly indicates that it returns a promise.

In our project, we decided to always use 'return await'.
The argument is that "the risk of forgetting to add the 'await' when later on a try-catch block is put around the return expression justifies having the redundant 'await' now."

Here is a typescript example that you can run and convince yourself that you need that "return await"
async function test() {
try {
return await throwErr(); // this is correct
// return throwErr(); // this will prevent inner catch to ever to be reached
}
catch (err) {
console.log("inner catch is reached")
return
}
}
const throwErr = async () => {
throw("Fake error")
}
void test().then(() => {
console.log("done")
}).catch(e => {
console.log("outer catch is reached")
});

here i leave some code practical for you can undertand it the diferrence
let x = async function () {
return new Promise((res, rej) => {
setTimeout(async function () {
console.log("finished 1");
return await new Promise((resolve, reject) => { // delete the return and you will see the difference
setTimeout(function () {
resolve("woo2");
console.log("finished 2");
}, 5000);
});
res("woo1");
}, 3000);
});
};
(async function () {
var counter = 0;
const a = setInterval(function () { // counter for every second, this is just to see the precision and understand the code
if (counter == 7) {
clearInterval(a);
}
console.log(counter);
counter = counter + 1;
}, 1000);
console.time("time1");
console.log("hello i starting first of all");
await x();
console.log("more code...");
console.timeEnd("time1");
})();
the function "x" just is a function async than it have other fucn
if will delete the return it print "more code..."
the variable x is just an asynchronous function that in turn has another asynchronous function, in the main of the code we invoke a wait to call the function of the variable x, when it completes it follows the sequence of the code, that would be normal for "async / await ", but inside the x function there is another asynchronous function, and this returns a promise or returns a" promise "it will stay inside the x function, forgetting the main code, that is, it will not print the" console.log ("more code .. "), on the other hand if we put" await "it will wait for every function that completes and finally follows the normal sequence of the main code.
below the "console.log (" finished 1 "delete the" return ", you will see the behavior.