Yarn install not working, getting "Other managers are not allowed" - javascript

I just started using yarn package manager in one of my project. I installed yarn globally using sudo npm install yarn -g
But when I tried to install dependencies using yarn install I was getting the following on the CLI
info No lockfile found.
$ node tools/preinstall
=========================================
Please install / add dependencies via npm
Other managers are not allowed
=========================================
error Command failed with exit code 1.
info Visit https://yarnpkg.com/en/docs/cli/install for documentation about this command.
That's weird. Any idea why am I getting this? Is there anyway I can enable yarn for my project?
Thanks in anticipation

Looks like it was happening because of preinstall script. Thanks #Kevin for the answer, you saved my day.

Related

Cannot install Vue Cli on Mac Catalina [duplicate]

While installing the dependencies of vue-cli, vue is not identified. Why?
rm -rf node_modules and npm install again
have a look here
Add sudo before yarn when installing
yarn global remove #vue/cli
sudo yarn global add #vue/cli
vue
I had the same issue for a while.
TL;DR
npm install #vue/cli-service --save-dev
As the documentation specify it is a development dependency https://cli.vuejs.org/guide/#cli-service
The CLI Service (#vue/cli-service) is a development dependency. It's an npm package installed locally into every project created by #vue/cli.
Origin
I had a fresh install of nodejs
And just did
>> sudo npm install -g #vue/cli#latest
>> vue --version
#vue/cli 4.5.8
The issue
The issue presented like this
>> npm run serve
yarn run v1.22.10
$ vue-cli-service build --mode development --watch
/bin/sh: 1: vue-cli-service: not found
error Command failed with exit code 127.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
The fixes:
npm install #vue/cli-service --save-dev
Which led me straight to another error message
>> npm run serve
yarn run v1.22.10
$ vue-cli-service build --mode development --watch
ERROR Error: Cannot find module 'vue-template-compiler/package.json'
Which I fixed the same way
npm i vue-template-compiler --save-dev
And now it is working fine.
Installing current version without permanently installing vue-cli.
npx #vue/cli create appname
It shows the vue executable is located at /home/alisha/.local/bin. So probably this location is not there in your $PATH.
You should be able to run the vue commands if you provide the full path, like:
~/.local/bin/vue create hello-world
You can also see if that directory is in your PATH by running some command like:
echo $PATH | grep '.local/bin/'
If it's there, you would see it, otherwise you can add it to your path by placing it in your ~/.profile.
Edit ~/.profile and add the following at the bottom of it.
PATH="$HOME/.local/bin:$PATH"
Hope it helps!!
I had the same issue while making a build for production.
You will require vue-cli to be installed. Use below command to install the latest version.
npm install -g #vue/cli#latest
Then
npm install
Might have to do with you having an old version on your computer:
Warning regarding Previous Versions
The package name changed from vue-cli to #vue/cli. If you have the previous vue-cli (1.x or 2.x) package installed globally, you need to uninstall it first with
npm uninstall vue-cli -g or yarn global remove vue-cli.
You can find it here: https://cli.vuejs.org/guide/installation.html
THIS FIXED THE ISSUE FOR ME:
After running
sudo npm install -g #vue/cli
I ran
sudo nano $HOME/.profile
and pasted the following line
export PATH=$PATH:/home/chike/.npm-global/bin
after writing the code, next thing I did was Ctrl + O, ENTER and Ctrl + X then wrote
vue init webpack myapp
When you install vue using cli that time you got the path of vue.Now you can copy the bin folder path.
In my example /home/sublime/.npm-packages/bin
Now you export the path below command
export PATH=$PATH:/home/sublime/.npm-packages/bin
I solved mine by running (add sudo if needed)
npm i -g vue-cli#2.9.6
npm i -g #vue/cli
Got similar issue when deploy vue project in jenkins.
Here is what I did:
Add node's bin/ dir, to jenkins user's .bashrc file.
e.g
# node
NODE_HOME=/home/dev/.nvm/versions/node/default
PATH=$NODE_HOME/bin:$PATH
Tips - about nvm & yarn
When you manage node version via nvm, make sure you already choose the node version in terminal. e.g:
nvm use stable
node -v
If you use nvm, and installed yarn via npm, then better install vue-cli via npm not yarn, otherwise the vue executable is not placed into node's bin/ dir, at least that's the case in my tests, and as a result will cause you fail to find the vue command.
Using Yarn on Ubuntu it is installed to ~/.npm-packages/bin/. You must add this directory to your PATH. For example run the following command, close your terminal and open a new one.
user#machine:~$ echo 'export PATH="$PATH:~/.npm-packages/bin/"' >> ~/.bashrc
Note: if the file ~/.bashrc does not exist then simply create it.
Following worked for me:
First remove all the existing ones:
yarn global remove #vue/cli
yarn global remove #vue/cli-service
sudo yarn global remove #vue/cli
sudo yarn global remove #vue/cli-service
Then add #vue/cli using sudo:
Note: use sudo if required
yarn global add #vue/cli
yarn global add #vue/cli-service
Then, the final thing to do is to RESTART the terminal.
vue --version
#vue/cli 4.5.9
If you already got a project, the only two things you need to do is:
Delete the directory node_modules (it is safe, since it is not under git and will regenerate in the next step)
In the command-line write yarn install (it will install everything you need)
If you start installing vue-cli manually in a existing project, it the package.json and package-lock.json will be updated. If you already did. Do a checkout from git, and follow my steps above
This may be a problem caused by version conflicts. "export PATH=$PATH:" This is really useful in some cases. But if you are also like me, after trying the direct “export path” method in the comment above, restarting the terminal still can not execute the situation, you can try this way.
Uninstall Vue
npm uninstall -g #vue/cli
Check the local-global npm package installation path, vue is installed in this directory, check if it has been removed.
npm root -g
Install vue (you can check with https://cli.vuejs.org/#getting-started to find the latest command)
npm install -g #vue/cli
Create a connection to the /usr/local/bin directory(You need to find the vue.js path after the local installation first, then replace this path with your latest local install path:/Users/xxxxx/.npm-global/lib/node_modules/#vue/cli/bin/vue.js)
ln -s /Users/xxxxx/.npm-global/lib/node_modules/#vue/cli/bin/vue.js /usr/local/bin/vue
View version number
vue -v
I was getting the same error because Node.js was not installed. My issue got resolved by installing Node.js using the following command:
sudo apt install nodejs-legacy
To see if you already have Node.js and npm installed and check the installed version, run the following commands:
node -v
npm -v
If both are installed then follow the steps here:
https://docs.npmjs.com/resolving-eacces-permissions-errors-when-installing-packages-globally
I installed the package using yarn global add #vue/cli on my Ubuntu box and found the binary in /home/vonkad/.yarn/bin.
I had to modify my /home/vonkad/.bashrc and add the directory to the path export PATH=$PATH:/home/vonkad/.yarn/bin.
To fix this situation, I had to add the following line to my .zshrc (maybe in your case is .bashrc)
export PATH="$(yarn global bin):$PATH"
Effectively, the yarn global bin is a folder where vue (vue-cli 3) was placed.
What helped me
mac os catalina with zsh terminal
Uninstalled node and npm using https://www.positronx.io/how-to-uninstall-node-js-and-npm-from-macos/
Downloaded node/npm from https://nodejs.org/en/download/current/
sudo npm install -g #vue/cli
vue --version (#vue/cli 4.5.4)
I faced the same issue and now resolved. In my case I installed Node.js and NPM using the default Ubuntu repository by using this command sudo apt-get install nodejs npm
The problems seemed like those 2 packages are not well maintained so it caused some bugs.
So I purge those packages and reinstall it from nodesource which is officially recommended way to install (reference: Installation instruction from nodesource) using these commands.
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -
sudo apt-get install -y nodejs
Then reinstall #vue/cli again
sudo npm install -g #vue/cli
Now these issues have gone. Hope it helps some programmers.
You need to install vue via sudo like explained in the doc:
https://cli.vuejs.org/guide/installation.html
If you have WSL2 running and you use zsh like me, just add
yarn global add #vue/cli
# add this line to ~/.zshrc
export PATH="$HOME/.yarn/bin:$PATH"
$ vue --version
#vue/cli 4.x.xx
You can try the following code install see
npm install --global vue-cli
vue init webpack <YOUR-PROJECT-NAME-HERE>
cd <YOUR-PROJECT-NAME-HERE>
npm install
npm run dev

How do I remove yarn from angular cli. I want to use npm to install packages

Installing packages for tooling via yarn.
An unhandled exception occurred: 'yarn' is not recognized as an internal or external command,
operable program or batch file.
Package install failed, see above.
See "C:\Users\hp\AppData\Local\Temp\ng-TAwQZJ\angular-errors.log" for further details.
This is the error in my terminal everytime I try to install any package.
I have tried "npm uninstall -g yarn" nothing happens. I tried in control panel to find any yarn package but nothing.
How can we do this and install packages via npm?
try either of
ng config --global cli.packageManager npm
or
ng set --global packageManager=npm
Also, Yarn is faster and better as per some blogs,
So you can keep yarn as default package manager and install it
https://classic.yarnpkg.com/en/docs/install/

Why can't find package required on the "npm" registry

I have problems running my web app using this tutorial video React Native Web Full App Tutorial - Build a Workout App for iOS, Android, and Web
in react-native. I've been searching a lot for an answer but there is no accurate one yet that solves my issue.
I downloaded the app from here: git repo.
Try to use:
$ yarn
$ yarn install
$ npm install
$ npm config set #icons:registry https://registry.npmjs.org/
$ rm -rf node_modules
$ npm i https://github.com/Qix-/node-error-ex
$ curl 'https://registry.yarnpkg.com/#types/node/-/node-9.4.2.tgz'
but nothing seems to work, I keep getting this error.
error Couldn't find package "#wow/common#1.0.0" required by "#wow/app#0.0.1" on the "npm" registry.
info Visit https://yarnpkg.com/en/docs/cli/install for documentation about this command.
Error: Couldn't find package "#wow/common#1.0.0" required by "react-native-web-workout-series#0.1.0" on the "npm" registry.
at MessageError.ExtendableBuiltin (/usr/local/Cellar/yarn/1.22.4/libexec/lib/cli.js:721:66)
at new MessageError (/usr/local/Cellar/yarn/1.22.4/libexec/lib/cli.js:750:123)
at PackageRequest.<anonymous> (/usr/local/Cellar/yarn/1.22.4/libexec/lib/cli.js:36539:17)
at Generator.throw (<anonymous>)
at step (/usr/local/Cellar/yarn/1.22.4/libexec/lib/cli.js:310:30)
at /usr/local/Cellar/yarn/1.22.4/libexec/lib/cli.js:323:13
at processTicksAndRejections (internal/process/task_queues.js:97:5)
Or any steps I need to follow to run this app. Since I want to download the app and edit the body content.
I tried to download and test it myself and it worked normally.
Clone it again and follow these steps:
#After cloning enter the folder
cd react-native-web-series
#install all dependencies
yarn install
#Navigate to the web folder
cd packages/web
#start the app
yarn start
Ps. : If a project is using yarn is not a good ideia to run npm commands, do not mix those two
In my case, the reason was the .npmrc file.
You can rename this file
mv ~/.npmrc ~/.npmrc2
npx create-react-app my-app
and rename it back after the installation.
mv ~/.npmrc2 ~/.npmrc
I ran into the same problem here.
And just as #Dmitry Grinko mentioned, it is related to .npmrc file.
I used private npm registry before so that some of package is missing.
Using following registry will pass the problem.
registry=https://registry.npmjs.org/
use npm login in terminal to login into your npm registry.
More information available here:
https://github.com/yarnpkg/yarn/issues/6029
npm install -g npm#latest
npm config set registry https://registry.npmjs.org/
If you're using nvm
nvm install 14.18.0
nvm use 14.18.0
nvm alias default 14.18.0
after look on the git repo - i think that maybe you should try to run npm i (or other commands - im not from react native area) in any package(app,common,web) to itself - like I saw any one of them has package.json of his own

Failed to create app with create-react-app in Linux 16.04

I am trying to create new app with create-react-app.
Below is the error.
Please help. Thanks in advance
➜ REACT create-react-app my-app
Creating a new React app in /media/budi/Tjung/#TJUNG/REACT/my-app.
Installing packages. This might take a couple of minutes.
Installing react, react-dom, and react-scripts...
yarn add v1.6.0
info No lockfile found.
[1/4] Resolving packages...
error An unexpected error occurred: "http://registry.npmjs.org/react: > ETIMEDOUT".
info If you think this is a bug, please open a bug report with the information provided in "/media/budi/Tjung/#TJUNG/REACT/my-app/yarn-error.log".
info Visit https://yarnpkg.com/en/docs/cli/add for documentation about this command.
Aborting installation.
yarnpkg add --exact react react-dom react-scripts --cwd /media/budi/Tjung/#TJUNG/REACT/my-app has failed.
Deleting generated file... package.json
Deleting generated file... yarn-error.log
Deleting my-app / from /media/budi/Tjung/#TJUNG/REACT
Done.
error image at CLI
Looks like network problem to me. You could be behind a proxy. If that is the case, configure your proxy in npm like this
npm config set proxy http://proxy_host:port
For https
npm config set https-proxy http://proxy.company.com:8080
Note: The https-proxy doesn't have https as the protocol, but http.
Optionally you can also try,
npm config set strict-ssl false
Checkout this SO answer
check if npm exists on your system.
try the commands in this order.
1. npm install --save create-react-app
2. create-react-app projectname
The name of the project must be in lowercase
Assuming that you have Node installed, you can use npm to install the create-react-native-app command line utility:
npm install -g create-react-native-app
Then run the following commands to create a new React Native project called "my-app":
create-react-native-app my-app
cd my-app
npm start
I have solve this problem.. it is about internet speed connection.
.
When I met this problem, I have spent one day to find out the solution. I read so many article about ETIMEDOUT. I had uninstall and re-install npm and yarn. Still doesn't solve my problem.
.
Until then I found the spot that has high speed internet connection. Fortunately I can create new app with create-react-app.
I think there are problem with your configurations of npm package.
Maybe somewhere, you set up some proxy configuration to npm variables.
You can reset configs running this script in terminal
sudo sh -c 'echo "" > $(npm config get globalconfig)'
and wait until process will end and run
exit
Open another terminal window and try

npm ERR! request to https://registry.npmjs.org/node-modules failed, reason: error:0906D06C:PEM routines:PEM_read_bio:no start line

I am getting this error while installing any JS package , I have done lots of search but no luck. So please let me know where i am making mistake.
npm ERR! request to https://registry.npmjs.org/node-modules failed,
reason: error:0906D06C:PEM routines:PEM_read_bio:no start line
WebServer : Apache2(xampp)
Node : v9.3.0
NPM : 5.5.1
I think that first you need to start prompt as an administrator, then run npm cache clean -f then try to run npm install, by this command the npm will install the packages listed in package.json.
Or
You can run npm config set registry http://registry.npmjs.org/ so you can run npm install -g node-modules. Read more in this answer.
I faced the same problem and finally I was able to solve the exact above error by doing the following steps:-
check version of your npm with npm -v
run npm -g install npm#<version> This step is important as npm is getting installed globally here.
Now run the command where you want to install something globally using npm. In my Case the command was npm install -g #angular/cli#6.2.9 which worked fine after these changes
If you are still facing the problem, I would recommend to follow the instructions about installing nodejs perfectly from here https://docs.npmjs.com/try-the-latest-stable-version-of-npm#upgrading-on-windows

Categories

Resources