Can't parseInt the value of prompt - javascript

I am triying to rest the values i get from prompts to get the results but i've tried several combinations and I always get Nan
you already catched
<html>
<head>
<title>Mis Pokemons</title>
</head>
<body>
<script>
var kanto = 151
var johto = 100
var hoenn = 135
var sinnoh = 107
var totalPokemons = kanto + johto + hoenn + sinnoh
var teFaltanDeKanto = kanto - cuantosKanto
var teFaltandeJohto = johto - cuantosJohto
var cuantosKanto = prompt('¿Cuantos pokemon has capturado de la región de Kanto?');
cuantosKanto = parseInt(cuantosKanto);
var cuantosJohto = parseInt(prompt('¿Cuantos pokemon has capturado de la región de Johto?'));
var cuantosHoenn = prompt('¿Cuantos pokemon has capturado de la región de Hoenn?');
var cuantosSinnoh = prompt('¿Cuantos pokemon has capturado de la región de Sinnoh?');
document.write('Has capturado ' + cuantosKanto + ' pokemons de Kanto y te faltan ' + teFaltanDeKanto + 'Has capturado ' + cuantosJohto + ' de johto y te faltan ' + teFaltandeJohto);
</script>
</body>
</html>

Don't use variables before defining them.
This is one of your major issues in your code, you are subtracting the value of cuantosKanto from kanto when cuantosKanto is not defined and neither have a value yet.
Here is the issue:
var teFaltanDeKanto = kanto - cuantosKanto
var teFaltandeJohto = johto - cuantosJohto
So, what I'd recommend is that you do your calc inline like this:
`Región Kanto: ${cuantosKanto} capturados. ${Pokemons.kanto-cuantosKanto} restantes.`
And as you may have seen, I am using the object Pokemons. This will help you keep your code readable so you can understand it a lot better:
const Pokemons = {
"kanto":151,
"johto":100,
"hoenn":135,
"sinnoh":107,
"total":function(){
return this.kanto+this.johto+this.hoenn+this.sinnoh
}
};
This way you can access the total Pokémons in any region by doing Pokemons.sinnoh. And even get the total Pokémons by doing Pokemons.total().
NOTE
The recommended method to parse a string into a number for this case is to use the unary plus operator.
This means instead of doing:
var cuantosKanto = parseInt(prompt("Number"));
You can just do:
var cuantosKanto = +prompt("Number");
With everything said and detailed, here is an example of everything mentioned:
CODE:
const Pokemons = {
"kanto":151,
"johto":100,
"hoenn":135,
"sinnoh":107,
"total":function(){
return this.kanto+this.johto+this.hoenn+this.sinnoh
}
};
var cuantosKanto = +prompt('¿Cuantos pokemon has capturado de la región de Kanto?');
var cuantosJohto = +prompt('¿Cuantos pokemon has capturado de la región de Johto?');
var cuantosHoenn = +prompt('¿Cuantos pokemon has capturado de la región de Hoenn?');
var cuantosSinnoh = +prompt('¿Cuantos pokemon has capturado de la región de Sinnoh?');
var capturados = cuantosKanto+cuantosJohto+cuantosHoenn+cuantosSinnoh;
document.write(`
Has capturado ${capturados} pokémon de ${Pokemons.total()}.<br><br>
Región Kanto: ${cuantosKanto} capturados.<br>
${Pokemons.kanto-cuantosKanto} restantes.<br><br>
Region Johto: ${cuantosJohto} capturados.<br>
${Pokemons.johto-cuantosJohto} restantes.<br><br>
Region Hoenn: ${cuantosHoenn} capturados.<br>
${Pokemons.hoenn-cuantosHoenn} restantes.<br><br>
Region Sinnoh: ${cuantosSinnoh} capturados.<br>
${Pokemons.sinnoh-cuantosSinnoh} restantes.<br><br>
`);

These two statements don't do what you expecct:
var teFaltanDeKanto = kanto - cuantosKanto
var teFaltandeJohto = johto - cuantosJohto
You are attempting to add two numbers together, but cuantosKanto and cuantosJohto have not been assigned a value at that point.
So move those two statements to just above the document.write() statement.

Related

Interactive change from Google Doc to Google Spreadsheet tick box

I had another post with my project (container bound script) but this time I've tried to do the other way when I modify a Google Doc table section (when I tick in column J) it will modify the line in the Google Sheet because each line corresponds to a Google Doc project. It's the column J; I set a trigger to view the Google Doc in the same window and I can modify inside the thing is that when I close the Google Doc it's not modifying instantly the line of the Google Sheet.If I tick another time ; this is the one moment it modifies the line so the problem is that it has a delay of a tick. To see it :
1) log google make copy Tools -> Script editor set trigget view_doc_and_edit -> from spreadsheet on edit >>>
2) now if you click for a doc in the colum J you can see the google doc corresponding and we can modify it
3) we close we look in the table nothing changed and if we click another time the same place(row) it will change the row.
I know that for the Google Doc onEdit doesn't exist and I've tried to do by this way any idea is welcomed to modify in the same time to have an interactive tool
This is my project
https://docs.google.com/spreadsheets/d/1k_kj98U__0Bk44gh0qRFpaVx0ru3sN1pSPGiMQwimxo/edit?usp=sharing
var TITLE = 'Show Google Doc';
var SPREADSHEET_ID = "1k_kj98U__0Bk44gh0qRFpaVx0ru3sN1pSPGiMQwimxo"; // = assign your spreadsheet id to this variable
var column_name_project ;
var column_code_project ;
var column_chef_project;
var column_service ;
var column_other_services ;
var column_type_of_project ;
var column_perimeter ;
var column_date_project ;
var COLUMN_URL ;
/** will return the number of the column correspondant **/
function find_columns_in_projet(){
var tss = SpreadsheetApp.openById(SPREADSHEET_ID);
var sheet = tss.getSheets()[0];
var lastColumn = sheet.getLastColumn();
var data = sheet.getRange(1,1,1,lastColumn).getValues()[0];
for(var n=0;n<data.length;n++){
if(data[n].toString().indexOf('Name project') > -1)
column_name_project = n+1;
else if(data[n].toString().indexOf('Code') > -1)
column_code_project = n + 1;
else if(data[n].toString().indexOf('Chef') > -1)
column_chef_project= n + 1;
else if(data[n].toString().indexOf('Service') > -1)
column_service = n +1 ;
else if(data[n].toString().indexOf('Other services') > -1)
column_other_services = n + 1;
else if(data[n].toString().indexOf('Type of the project') > -1)
column_type_of_project = n + 1;
else if(data[n].toString().indexOf('Perimeter') > -1)
column_perimeter = n + 1;
else if(data[n].toString().indexOf('Date') > -1)
column_date_project = n + 1;
else if(data[n].toString().indexOf('URL') > -1)
COLUMN_URL = n +1 ;
}
}
/** pour visualiser le document sur la meme page **/
function view_doc_and_edit(event) {
find_columns_in_projet();
Logger.log("!! La colonne URL est: !!" + COLUMN_URL );
if( ( event.range.getSheet().getName() === "Sheet1" ) && ( event.range.getColumnIndex() == COLUMN_URL +1 ) ) {
if( event.value === "TRUE" ) {
try {
var URL = event.range.offset(0,-1,1,1).getValue();
Logger.log('The URL is : ' + URL );
var google_doc = DocumentApp.openByUrl(URL) ;
var body = google_doc.getBody();
Logger.log('The body is ' + body );
// Add this line
var ui = HtmlService.createTemplateFromFile('ModeLessDialog');
ui.body = URL; // Pass url to template
ui = ui.evaluate().setWidth(1000).setHeight(500);
SpreadsheetApp.getUi().showModalDialog(ui, TITLE);
var insertion_position = event.range.getRow() ;
var tss_bis = SpreadsheetApp.openById(SPREADSHEET_ID);
var sheet_bis = tss_bis.getSheets()[0];
var numRows_bis = sheet_bis.getLastRow();
var lastColumn_bis = sheet_bis.getLastColumn();
//from the second line car the first line we have the headers
var data_sheet = sheet_bis.getRange(1,1,numRows_bis,lastColumn_bis).getDisplayValues();
if(body)
{
var ok = 0; //pour l'instant il n'y a pas de tableau trouvé (avec 8 lignes) qui nous interesse pour mettre à jour dans la feuille de calcul
var numChildren=body.getNumChildren();
var compteur=0;
//tant qu'on n'a pas du tableau on va parcourir (car on n'est pas sur d'avoir le 4 comme enfant (Numero_Enfant_Tableau_Template) car l'utilisateur pourra modifier/insérer un prargraphe une image etc.
while(ok ==0 && compteur<numChildren)
{
var child=body.getChild(compteur);
/** ============On est concerné par le premier tableau seulement qui a au plus 8 lignes d'information ================**/
Logger.log('Le type dans la boucle ' + child.getType());
//on a trouvé un tableau qui nous interesse et qui a au plus 8 lignes d'information **/
if(child.getType()==DocumentApp.ElementType.TABLE && child.asTable().getNumRows() >= 8)
{
//on a trouve notre premier tableau la variable ok = 1
ok=1;
/** Le nombre de lignes dans le premier tableau avec au plus 8 lignes qui nous interessent **/
var numrows = child.asTable().getNumRows();
Logger.log('Le nombre de lignes dans notre Google Doc ' + numrows);
/** on va parcourir notre tableau pour récuperer les champs qui nous interessent **/
var k = 1; //on sait que c'est l'information à droite qui nous interessent on va éviter une boucle inutile
var celltxt,trange;
/** On va mettre la valeur du celltxt dans le spreadsheet et on va ajuster automatiquement la colonne avec la méthode autoResizeColumn **/
celltxt=child.asTable().getCell(0, k).editAsText().getText();
Logger.log('La valeur (à droite) dans le tableau ' + celltxt);
trange = sheet_bis.getRange(insertion_position, column_name_project); //l'emplacement correspondant
trange.setValue(celltxt);
celltxt=child.asTable().getCell(1, k).editAsText().getText();
Logger.log('La valeur (à droite) dans le tableau ' + celltxt);
trange = sheet_bis.getRange(insertion_position, column_code_project); //l'emplacement correspondant
trange.setValue(celltxt);
celltxt=child.asTable().getCell(2, k).editAsText().getText();
Logger.log('La valeur (à droite) dans le tableau ' + celltxt);
trange = sheet_bis.getRange(insertion_position, column_chef_project); //l'emplacement correspondant
trange.setValue(celltxt);
celltxt=child.asTable().getCell(3, k).editAsText().getText();
Logger.log('La valeur (à droite) dans le tableau ' + celltxt);
trange = sheet_bis.getRange(insertion_position, column_service); //l'emplacement correspondant
trange.setValue(celltxt);
celltxt=child.asTable().getCell(4, k).editAsText().getText();
Logger.log('La valeur (à droite) dans le tableau ' + celltxt);
trange = sheet_bis.getRange(insertion_position, column_other_services); //l'emplacement correspondant
trange.setValue(celltxt);
celltxt=child.asTable().getCell(5, k).editAsText().getText();
Logger.log('La valeur (à droite) dans le tableau ' + celltxt);
trange = sheet_bis.getRange(insertion_position, column_type_of_project); //l'emplacement correspondant
trange.setValue(celltxt);
celltxt=child.asTable().getCell(6, k).editAsText().getText();
Logger.log('La valeur (à droite) dans le tableau ' + celltxt);
trange = sheet_bis.getRange(insertion_position, column_perimeter); //l'emplacement correspondant
trange.setValue(celltxt);
celltxt=child.asTable().getCell(7, k).editAsText().getText();
Logger.log('La valeur (à droite) dans le tableau ' + celltxt);
trange = sheet_bis.getRange(insertion_position, column_date_project); //l'emplacement correspondant
trange.setValue(celltxt);
}
compteur++; /** on va incrementer le compteur jusqu'à on trouve le tableau qui nous interessent **/
}
}
event.range.setValue("FALSE");
}
catch(err) {
Logger.log(err);
}
}
}
google_doc.saveAndClose();
}

Alert an array with while loop

Using while loop, I want to alert names with their number from an array. I also have to put every name in a single alert.
Script:
var voetbalteam = 1;
var spelers = ["Nobert Alblas", "Kostas Lamprou", "André Onana", "Benjamin van Leer", "Léon Bergsma", "Damil Dankerlui", "Matthijs de Ligt", "Mitchell Dijks", "Luis Orejuela", "Daley Sinkgraven", "Joël Veltman", "Nick Viergever", "Max Wöber", "Deyovaisio Zeefuik", "Frenkie de Jong", "Siem de Jong", "Carel Eiting", "Noussair Mazaoui", "Lasse Schöne", "Donny van de Beek", "Klaas Jan Huntelaar", "Kasper Dolberg", "Justin Kluivert"];
while ((voetbalteam <= 23) + (spelers >= 0)){
alert("Ik ben " + spelers[spelers] + " En ik ben de " + voetbalteam + "e speler.");
spelers ++;
voetbalteam ++;
}
Use forEach() to loop over the array.
var voetbalteam = 1;
var spelers = ["Nobert Alblas", "Kostas Lamprou", "André Onana", "Benjamin van Leer", "Léon Bergsma", "Damil Dankerlui", "Matthijs de Ligt", "Mitchell Dijks", "Luis Orejuela", "Daley Sinkgraven", "Joël Veltman", "Nick Viergever", "Max Wöber", "Deyovaisio Zeefuik", "Frenkie de Jong", "Siem de Jong", "Carel Eiting", "Noussair Mazaoui", "Lasse Schöne", "Donny van de Beek", "Klaas Jan Huntelaar", "Kasper Dolberg", "Justin Kluivert"];
spelers.forEach(function(key, value){
console.log("Ik ben " + key + " En ik ben de " + (value + 1) + "e speler.");
});
Using a while loop, use voetbalteam as an iterator and increment it inside the while loop.
var voetbalteam = 0;
var spelers = ["Nobert Alblas", "Kostas Lamprou", "André Onana", "Benjamin van Leer", "Léon Bergsma", "Damil Dankerlui", "Matthijs de Ligt", "Mitchell Dijks", "Luis Orejuela", "Daley Sinkgraven", "Joël Veltman", "Nick Viergever", "Max Wöber", "Deyovaisio Zeefuik", "Frenkie de Jong", "Siem de Jong", "Carel Eiting", "Noussair Mazaoui", "Lasse Schöne", "Donny van de Beek", "Klaas Jan Huntelaar", "Kasper Dolberg", "Justin Kluivert"];
while (voetbalteam < spelers.length){
console.log("Ik ben " + spelers[voetbalteam] + " En ik ben de " + (voetbalteam + 1) + "e speler.");
voetbalteam ++;
}
consider using console.log() instead of alert() when you are coding.
alert() is blocking
alert() cannot be easily suppressed in non-debug environment
console typically formats your objects nicely and allows to traverse
them
logging statements often have an interactive pointer to code which
issued logging statement
you cannot look at more than one alert() message at a time
consoles can have different logging levels with intuitive formatting
The above text was taken from here
If you really want to use a while loop, try this:
var voetbalteam = 0;
var spelers = ["Nobert Alblas", "Kostas Lamprou", "André Onana", "Benjamin van Leer", "Léon Bergsma", "Damil Dankerlui", "Matthijs de Ligt", "Mitchell Dijks", "Luis Orejuela", "Daley Sinkgraven", "Joël Veltman", "Nick Viergever", "Max Wöber", "Deyovaisio Zeefuik", "Frenkie de Jong", "Siem de Jong", "Carel Eiting", "Noussair Mazaoui", "Lasse Schöne", "Donny van de Beek", "Klaas Jan Huntelaar", "Kasper Dolberg", "Justin Kluivert"];
while (voetbalteam < spelers.length){
alert("Ik ben " + spelers[voetbalteam] + " En ik ben de " + (voetbalteam + 1) + "e speler.");
voetbalteam++;
}

XHR Unable to Load with Django Project

I'm in traineeship in a company and I need to used the program of another trainee who programmed it in 2012. So I have done some update but I have a some problems :
When I press a button, I have a JS that make a xhr.get to recover a JSON. But I have this message on my firefox console :
Object { message: "Unable to load /query/?typeForm=com…", stack:".cache["dojo/errors/create"]/</</g#…", response: Object, status: 0,responseText: "", xhr: XMLHttpRequest }
My JS :
function queryDataGrid(map, stringForm) {
var test = "pouet";
require(["dojox/grid/DataGrid",
"dojo/store/Memory",
"dojo/data/ObjectStore",
"dojo/_base/xhr",
"dojo/domReady!",
"dojo/dom",
"dojo/_base/array"],
function(DataGrid, Memory, ObjectStore, xhr, arrayUtil, dom) {
var nodeDomGrid = dom.byId("datagrid");
window.alert("hey");
xhr.get({
url: "/query/",
form: dom.byId(stringForm),
handleAs: "json",
load: function(data) {
var nodeDomGrid = dom.byId("datagrid");
var nodeGrid = dijit.byId("datagrid");
var gridLayout = [];
var dataStore = new ObjectStore({ objectStore:new Memory({ data: data.fields }) });
console.log("store");
console.log(data.fields[0][1]);
globalData = data;
for(i in data.columns) {
gridLayout.push({
name: data.columns[i],
field: data.columns[i],
width: "auto"
})
}
nodeGrid.setStructure(gridLayout);
nodeGrid.setStore(dataStore);
var nodeMap = dom.byId("map");
columns = data.columns;
columnsToDisplay = []
numberColumn = 0;
for (i in columns) {
if (columns[i] == "Distance Fin") {
numberColumn = i
}
if (parseInt(i) > parseInt(numberColumn) && numberColumn != 0) {
columnsToDisplay.push({ value: columns[i], label: columns[i]});
}
}
dijit.byId("dataToColor").addOption(columnsToDisplay);
var vectorLayer = map.getLayersByName("KML")[0];
vectorLayer.removeAllFeatures();
var kmlFile = createKMLFile(data.kmldata, dom.byId("hiddenColor").value, dom.byId("sizeLine").value, dom.byId("colourPR").style.backgroundColor, dom.byId("sizePR").value);
var features = KMLToFeatures(kmlFile);
var bounds;
for(var i=0; i<features.length; ++i) {
if (!bounds) {
bounds = features[i].geometry.getBounds();
} else {
bounds.extend(features[i].geometry.getBounds());
}
}
vectorLayer.addFeatures(features);
console.log(vectorLayer);
map.zoomToExtent(bounds);
refreshLayer(vectorLayer);
if (stringForm == "commonQueriesForm" && dijit.byId("table").get("value") == "location") {
dom.byId("colourPalette").style.display = "block";
dom.byId("styleKML").style.display = "none";
}
else {
dom.byId("colourPalette").style.display = "none";
dom.byId("styleKML").style.display = "block";
}
},
// Message d'erreur à modifier
error: function() {
nodeDomGrid.innerHTML = "La requête a engendré une erreur.";
}
})
});
console.log(stringForm);
};
My Form :
<form id="commonQueriesForm" data-dojo-type="dijit.form.Form" onload="alert('test')">
<p>
<div id="commonDataTitlePane" data-dojo-type="dijit.TitlePane" data-dojo-props="title: 'Requêtes'">
<input type="text" name="typeForm" id="typeForm" value="common" style="display:none" />
<select name="table" id="table" class="cSelect" data-dojo-type="dijit/form/Select"
data-dojo-props="onChange:function(){ if (dijit.byId('table').get('value') == 'location') {dijit.byId('age').set('disabled', true); } else {dijit.byId('age').set('disabled', false); }}">
{% for key, value in dictTablesDatabase.items %}
<option value="{{ key }}">{{ key }}</option>
{% endfor %}
<option value="location">Repérages</option>
</select><br />
<select name="road" id="road" class="cSelect" data-dojo-type="dijit.form.Select" data-dojo-props="">
<option value="all">Toutes les routes</option>
{% for road in listRoad %}
<option value="{{ road|first|cut:' ' }}">{{ road|first|cut:' ' }}</option>
{% endfor %}
</select><br />
<select name="age" id="age" class="cSelect" data-dojo-type="dijit.form.Select" data-dojo-props="">
{% for age in arrayNumber %}
<option value="{{ age }}">{{ age }}</option>
{% endfor %}
</select>
</div>
<button type="executeButton" data-dojo-type="dijit.form.Button" onClick="queryDataGrid(map, 'commonQueriesForm');">Lancer la requête</button>
</p>
</form>
urls.py :
from django.conf.urls import include, url
from GSRBaseWeb.Home import views as myapp_views
# Uncomment the next two lines to enable the admin:
# from django.contrib import admin
# admin.autodiscover()
urlpatterns = [
# Examples:
# url(r'^$', 'GSRBaseWeb.views.home', name='home'),
# url(r'^GSRBaseWeb/', include('GSRBaseWeb.foo.urls')),
# Uncomment the admin/doc line below to enable admin documentation:
# url(r'^admin/doc/', include('django.contrib.admindocs.urls')),
# Uncomment the next line to enable the admin:
# url(r'^admin/', include(admin.site.urls)),
url(r'^home/$',myapp_views.home, name='home'),
url(r'^home/query', myapp_views.queryDataGrid, name='queryDataGrid'),
]
views.py :
# -*- coding: utf-8 -*-
from django.shortcuts import render
from django.http import HttpResponse
from GSRBaseWeb.Utils.utils import Utils
from GSRBaseWeb.DataAccess.databaseAccess import DatabaseAccess
from GSRBaseWeb.DataAccess.GSRBaseDLLAccess import GSRBaseDLLAccess
from ctypes import *
# Envoie les données nécessaires aux différents formulaires
def home(request):
dictToSend = {}
data = DatabaseAccess()
dictTablesDatabase = data.dataToDisplay()
dictToSend["dictTablesDatabase"] = dictTablesDatabase
# Sélection de l'ensemble des routes
queryRoads = "SELECT id_route, nom FROM routes"
listRoad = data.executeQuery(queryRoads)
dictToSend["listRoad"] = listRoad
# Liste pour les âges
arrayNumber = []
i = 0
while i < 20:
arrayNumber.append(i)
i += 1
arrayNumber.append("Tous")
dictToSend["arrayNumber"] = arrayNumber
# Liste pour les emplacements
arrayLocation = ["Tous", " ", "D", "C", "G"]
dictToSend["arrayLocation"] = arrayLocation
return render(request, 'Home/home.html', context=dictToSend)
# Récupère le contenu d'un formulaire et le traite en fonction du type de formulaire (commun, simple ou complexe)
def queryDataGrid(request):
# request.GET renvoie un QueryDict (objet Django)
print("YOLO")
parametersContent = request.GET
whatForm = parametersContent.getlist("typeForm")[0]
print(type(whatForm))
try:
accessDLL = GSRBaseDLLAccess()
except:
print(Exception.message())
if whatForm == "common":
table = parametersContent.getlist("table")[0]
road = parametersContent.getlist("road")[0]
if table != "location":
if parametersContent.getlist("age")[0] == "Tous":
age = 20
print("True")
else:
print("False")
age = int(unicode(parametersContent.getlist("age")[0]))
if road == "all":
road = ""
# on fait une requête sur les repérages
if table == "location":
result, number = accessDLL.requete_reperage(road)
else:
result, number = accessDLL.requete_table(table, road, age)
elif whatForm == "simple":
"""
On fait le traitement du formulaire de requêtes simples
Prendre en compte des ajouts des formulaires
On va prendre en compte les différentes lignes du formulaire et leur nombre """
listConditions = []
# Lignes des données
listQueries = dataProcessingForm("Simple", parametersContent)
# Checkout et les routes
conditionCheckout = parametersContent.getlist("conditionCheckout")[0]
conditionRoad = parametersContent.getlist("conditionRoad")[0]
conditionRoad = 'ROUTE()="' + conditionRoad + '"'
listConditions.append(conditionRoad)
# Lignes des conditions
j = 1
while j < 6:
if parametersContent.__contains__("conditionData" + str(j)) == True:
data = parametersContent.getlist("conditionData" + str(j))[0]
# On récupère la table de la condition
table = data.split(":")[0]
location = parametersContent.getlist("conditionLocation" + str(j))[0]
age = parametersContent.getlist("conditionAge" + str(j))[0]
condition = parametersContent.getlist("condition" + str(j))[0]
value = parametersContent.getlist("valueCondition" + str(j))[0]
conditionLine = "(" + data + condition
if (str(value).isdigit()):
conditionLine += str(value)
else:
conditionLine += '"' + str(value) + '"'
conditionLine += ' ET ' + table + ':generation=' + str(age) + ' ET ' + table + ':emplacement="' + location + '")'
if conditionCheckout == "anything":
conditionLine += "NON" + conditionLine
listConditions.append(conditionLine)
else:
break;
j += 1
##todo modifier la condition pour la Route(), ajouter un ET tout le temps
if conditionCheckout == "atLeast":
conditionQuery = ' OR '.join(listConditions)
elif conditionCheckout == "all":
conditionQuery = ' ET '.join(listConditions)
result, number = accessDLL.requete_avancee(listQueries, conditionQuery)
elif whatForm == "complex":
# On fait le traitement du formulaire de requêtes complexes
listQueries = dataProcessingForm("Complex", parametersContent)
conditionQuery = parametersContent.getlist("textareaConditions")[0]
result, number = accessDLL.requete_avancee(listQueries, conditionQuery)
json = ""
if number[0] > 0:
# json à renvoyer en fonction des données des formulaires
listResult = []
i = 0
while i <= number[0]:
listResult.append(result[i])
i += 1
json = Utils.jsonSerializeQueryResult(listResult)
print(json)
return HttpResponse(content=json,
status=200,
mimetype="text/plain")
def dataProcessingForm(form, parametersContent):
""" Mise en forme des données des formulaires pour les requêtes
La mise en forme est faite pour la DLL utilisée qui effectue le plus gros des requêtes
"""
listQueries = []
i = 1
while i < 6:
if parametersContent.__contains__("data" + form + str(i)) == True:
data = parametersContent.getlist("data" + form + str(i))[0]
location = parametersContent.getlist("location" + form + str(i))[0]
if parametersContent.getlist("age" + form + str(i))[0] == "Tous":
age = 20
else:
age = int(unicode(parametersContent.getlist("age" + form + str(i))[0]))
contentToAdd = data + "," + location + "," + str(age)
print(contentToAdd)
listQueries.append(contentToAdd)
else:
break;
i += 1
return ";".join(listQueries)
The JS code is trying to load the absolute path /query/, but your Django patterns are setup to respond to ^home/query. Try using /home/query as your xhr URL.

RegEx - Find all sets of string enclosed by quotes

I have documents in which i need to highlight that a person was quoted. So I'm looking for all text that's enclosed by quotes...I'm using the below code, which works but it only captures the first occurence..
var str = 'L\'armée sud-coréenne accuse la Corée du Nord d\'avoir lancé \"plusieurs\" missiles \"balistiques interdits qui ont franchi une distance\" d\'environ 1000 kilomètres avant de tomber au \"large de la côte est du pays communiste.\" '
var reg = new RegExp(/"(.*?)"/);
var matches = str.match(reg);
for (var i = 0; i < matches.length; i++) {
var s = matches[i];
str = str.replace(matches[i], '<span style="color:blue">' + matches[i] + '</span>');
matches[i] = s;
}
Make your Regex global:
The g modifier is used to perform a global match (find all matches rather than stopping after the first match).
var str = 'L\'armée sud-coréenne accuse la Corée du Nord d\'avoir lancé \"plusieurs\" missiles \"balistiques interdits qui ont franchi une distance\" d\'environ 1000 kilomètres avant de tomber au \"large de la côte est du pays communiste.\" '
var reg = new RegExp(/"(.*?)"/g); //notice /g, making the expression global
var matches = str.match(reg);
for (var i = 0; i < matches.length; i++) {
var s = matches[i];
str = str.replace(matches[i], '<span style="color:blue">' + matches[i] + '</span>');
matches[i] = s;
}
document.getElementById("myDiv").innerHTML = str;
Making your expression global guarantees all instances of the quotes match.
JSFiddle: https://jsfiddle.net/zjxjub96/
To illustrate what #Casimir says in his comment, here is a little example:
var str = 'L\'armée sud-coréenne accuse la Corée du Nord d\'avoir lancé \"plusieurs\" missiles \"balistiques interdits qui ont franchi une distance\" d\'environ 1000 kilomètres avant de tomber au \"large de la côte est du pays communiste.\" '
str = str.replace(/"(.*?)"/g, '<span style="color:blue">$&</span>')
document.getElementById("myDiv").innerHTML = str;
<div id="myDiv">
</div>
Notice that this way is easier, and doesn't require a for loop.
JSFiddle: https://jsfiddle.net/zjxjub96/1/

JSLint: Unexpected 'for'. Unexpected 'var'

I've searching and trying other suggestions in StackOverflow.
Unfortunately the answers are not working for me. They are suggesting to use 'foreach' instead of 'for', but how could I... if I want to iterate just 50 times? :<
Well, I'll just paste the code and let's see if some good folk can help me.
JSLint was unable to finish.
Unexpected 'for'. for (var i=1;i<=50;i+=1){
line 6 column 8
Unexpected 'var'. for (var i=1;i<=50;i+=1){
line 6 column 13
"use strict";
var campo = [];
var ronda = 0;
// Llenamos el campo de 50 humanos/maquinas/extraterrestres = 150 jugadores
for (var i=1;i<=50;i+=1){
campo.push(new Human("h"+i));
campo.push(new Machine("m"+i));
campo.push(new Alien("e"+i));
}
// Array.prototype.suffle para barajar el Array
Array.prototype.shuffle = function() {
var input = this;
for (var i=input.length-1;i>=0;i-=1){
var randomIndex = Math.floor(Math.random()*(i+1));
var itemAtIndex = input[randomIndex];
input[randomIndex]=input[i];
input[i] = itemAtIndex;
}
};
// Barajamos el Array campo
campo.shuffle();
// Comprobamos que quedan más de 1 jugador por ronda
while (campo.length>1) {
console.log("Iniciando ronda: " + ++ronda);
console.log(campo.length + " jugadores luchando.");
// Recorremos el campo, y luchamos
var muertos = 0;
for (var i=0; i<campo.length-1; i+=2){
// Caso de numero impar de jugadores:
// Por ejemplo cuando solo quedan 3 jugadores. Pelean 1 vs 2. El 3 se libra.
// - Si siguen vivos y aguantan otra ronda, se barajan las posiciones otra vez y
// vuelven a pelear dos. Y el nuevo tercero no pelea.
// - Si uno de los dos muere, en la siguiente ronda ya solo quedan 2, y pelean normal.
campo[i].fight(campo[(i+1)]);
// # descomentar solo la siguiente linea para hacer comprobaciones #
// console.log("["+ campo[i].username + "] VS ["+ campo[(i+1)].username + "]");
if (campo[i].health<=0) {
console.log("El " + campo[i].constructor.name + " llamado " + campo[i].showName() + " ha sido asesinado :<");
var fallecido = campo.splice(i, 1);
// # descomentar solo la siguiente linea para hacer comprobaciones #
//console.log(fallecido[0]);
i--; // como el array se hace pequeño, hay que corregir el error para que no se salte jugadores
muertos++;
} else {
if (campo[(i+1)].health<=0) {
console.log("El " + campo[(i+1)].constructor.name + " llamado " + campo[(i+1)].showName() + " ha sido asesinado :<");
var fallecido = campo.splice((i+1), 1);
// # descomentar solo la siguiente linea para hacer comprobaciones #
// console.log(fallecido[0]);
i--; // como el array se hace pequeño, hay que corregir el error para que no se salte jugadores
muertos++;
}
else {
// # descomentar solo la siguiente linea para hacer comprobaciones #
// console.log("Siguen vivos");
}
}
}
console.log("Fin de ronda!")
if (muertos === 1) {
console.log("Ha muerto " + muertos + " jugador.");
} else {
console.log("Han muerto " + muertos + " jugadores.");
}
// Al final de la ronda barajamos de nuevo
campo.shuffle();
}
if (campo.length === 1) {
console.log("Vaya!! Ha sido una memorable batalla!");
console.log("Después de tantos bits derramados y de " + ronda + " rondas... el jugador '" + campo[0].constructor.name + "' llamado '" + campo[0].showName() + "' se ha alzado con la victoria!!");
}
There are some other for in the code, but It seems to stop at the first one.
Thank you in advance!
Forgot to say, the code works PERFECT. But I was just validating it with JSLint, also 'tolerating' for warnings in JSLint doesn't work.
When you choose to tolerate for, the next thing it's warning you about is the global declaration of the var i. Since you've got the for-loop at the top-level, i becomes available everywhere in your program.
I'd just tolerate for and wrap it up an in IIFE. That way, i is only available inside this function, and doesn't leak out to the global scope.
(function() {
var i = 0;
for (i=1;i<=50;i+=1) {
campo.push(new Human("h"+i));
campo.push(new Machine("m"+i));
campo.push(new Alien("e"+i));
}
})();
You could also, barring using an existing implementation out there, create a function that generalizes the "repeat n times" definition.
function repeat(fn, n) {
var i = 0;
for (;i < n; i += 1) {
fn();
}
}
Use in your case would look like:
function initialize() {
campo.push(new Human("h"+i));
campo.push(new Machine("m"+i));
campo.push(new Alien("e"+i));
}
// then later
repeat(initialize, 50);
jslint is being overzealous (some would say), it expects all var statements to be at the top of a function.
You can tell jslint that you don't care about that rule by adding an instruction comment on the line above where you are declaring the variable.
// Llenamos el campo de 50 humanos/maquinas/extraterrestres = 150 jugadores
/*jslint for:true */
for (var i=1;i<=50;i+=1){
Or you can move all your var i; to the top of the file/function

Categories

Resources