I'm trying to remove an already existing event listener from an object. I've tried several methods (using jQuery .off(), .unbind(), standard removeEventsListeners()), but as stated in the docs they can only remove previously added ones?
Using the Chrome debugger, I can see and remove the specified event listener,
Also, when trying to list the event listeners via jQuery _data() function, it won't list the event. Have been searching for an answer for a couple of hours now.
Can anyone help? Any workaround?
Edit: I have to keep some, so cloning is not possible.
If the event handler was added with addEventListener, you cannot remove it unless you have a reference to the handler function that was added. I assume that must be the case, because if it were hooked up with jQuery's on (or various shortcuts for it), off would work, and you've said it didn't work.
One way to work around that is to replace the element with a clone. When you clone an element using the DOM's cloneNode, you don't copy its event handlers. So if you start out with element, then you can clone it, use insertBefore to insert the clone, then use removeChild to remove the original:
var newElement = element.cloneNode(true); // true = deep
element.parentNode.insertBefore(newElement, element);
element.parentNode.removeChild(element);
Of course, this is indeed a workaround. The proper thing would be not to set up the handler in the first place, or keep a reference to it if you need to be able to remove it later.
In a comment you've said you can't do that, and asked:
Is there a way to add a new event listener that blocks the already existing one?
Only if you can get there first, otherwise no, you can't.
You can't add a new handler that blocks an existing one (not in a standard way cross-browser), but if you can add yours before the other one is added, you can prevent it being called by using stopImmediatePropagation:
// Your handler
document.getElementById("target").addEventListener("click", function(e) {
console.log("Your handler");
e.stopImmediatePropagation();
e.stopPropagation();
});
// The one that you're trying to prevent
document.getElementById("target").addEventListener("click", function(e) {
console.log("Handler you're trying to prevent");
});
<div id="target">Click me</div>
So for instance, if the other handler is added in the window load event, or a jQuery ready handler, you may be able to get yours in first by putting your code in a script tag immediately after the element in question.
A very easy way of doing this is to append nothing to the parent element with .innerHTML. Just be aware this destroys all event listeners that are descendants of the parent element. Here's an example (click 2 to destroy the event listener attached to 1):
const d1 = document.querySelector('#d1');
d1.addEventListener('click', () => console.log(123));
const d2 = document.querySelector('#d2');
d2.addEventListener('click', () => d1.parentNode.innerHTML += '');
<div><button id="d1">1</button></div>
<div><button id="d2">2</button></div>
Related
I'm helping someone build a website through a website builder, Kajabi. Some of the JavaScript code is included by default in the website and there is no way to edit it. I'm trying to remove an event listener on the window element, but the event listener creation happened in the code that I can't edit. This code fires before anything else, so there's no way for me to interrupt it either.
On dev tools, I tracked down the event handler and found this:
(o=g.handle)||(o=g.handle=function(t){return"undefined"!=typeof Ft&&Ft.event.triggered!==t.type?Ft.event.dispatch.apply(e,arguments):void 0})
That's all the information I can find on the event listener. I understand cloning works to remove event listeners, but removing all listeners from children of the window element would cause trouble.
Any tips?
Going on with assumptions here from the little code you posted.
o is g.handle and that's an inline event listener, so you can simply overwrite it if you have access to them.
g.handle = false;
It seems that code is dispatching a new event from their Ft variable here Ft.event.dispatch.apply(e,arguments). It's a bit different than vanilla javascript's .dispatchEvent() but I'm assuming its just an implementation of it.
If that's not the case and there IS someplace else that's adding an event listener with .addEventListener() that you can't remove because you have no reference to the function, you can do a shallow clone and append the children to the clone element. The cloned element will lose any events attached with addEventListener() but their children will be unaffected. You're just appending the original children to the new cloned element.
let oldElement = document.getElementById("toClone");
// - Shallow clone
let clone = oldElement.cloneNode(false);
// - Adding the original children to the clone
while (oldElement.firstChild) {
clone.appendChild(oldElement.firstChild);
}
// - Replacing them
oldElement.parentNode.appendChild(clone);
oldElement.remove();
I have an input type="image". This acts like the cell notes in Microsoft Excel. If someone enters a number into the text box that this input-image is paired with, I setup an event handler for the input-image. Then when the user clicks the image, they get a little popup to add some notes to the data.
My problem is that when a user enters a zero into the text box, I need to disable the input-image's event handler. I have tried the following, but to no avail.
$('#myimage').click(function { return false; });
jQuery ≥ 1.7
With jQuery 1.7 onward the event API has been updated, .bind()/.unbind() are still available for backwards compatibility, but the preferred method is using the on()/off() functions. The below would now be,
$('#myimage').click(function() { return false; }); // Adds another click event
$('#myimage').off('click');
$('#myimage').on('click.mynamespace', function() { /* Do stuff */ });
$('#myimage').off('click.mynamespace');
jQuery < 1.7
In your example code you are simply adding another click event to the image, not overriding the previous one:
$('#myimage').click(function() { return false; }); // Adds another click event
Both click events will then get fired.
As people have said you can use unbind to remove all click events:
$('#myimage').unbind('click');
If you want to add a single event and then remove it (without removing any others that might have been added) then you can use event namespacing:
$('#myimage').bind('click.mynamespace', function() { /* Do stuff */ });
and to remove just your event:
$('#myimage').unbind('click.mynamespace');
This wasn't available when this question was answered, but you can also use the live() method to enable/disable events.
$('#myimage:not(.disabled)').live('click', myclickevent);
$('#mydisablebutton').click( function () { $('#myimage').addClass('disabled'); });
What will happen with this code is that when you click #mydisablebutton, it will add the class disabled to the #myimage element. This will make it so that the selector no longer matches the element and the event will not be fired until the 'disabled' class is removed making the .live() selector valid again.
This has other benefits by adding styling based on that class as well.
This can be done by using the unbind function.
$('#myimage').unbind('click');
You can add multiple event handlers to the same object and event in jquery. This means adding a new one doesn't replace the old ones.
There are several strategies for changing event handlers, such as event namespaces. There are some pages about this in the online docs.
Look at this question (that's how I learned of unbind). There is some useful description of these strategies in the answers.
How to read bound hover callback functions in jquery
If you want to respond to an event just one time, the following syntax should be really helpful:
$('.myLink').bind('click', function() {
//do some things
$(this).unbind('click', arguments.callee); //unbind *just this handler*
});
Using arguments.callee, we can ensure that the one specific anonymous-function handler is removed, and thus, have a single time handler for a given event. Hope this helps others.
maybe the unbind method will work for you
$("#myimage").unbind("click");
I had to set the event to null using the prop and the attr. I couldn't do it with one or the other. I also could not get .unbind to work. I am working on a TD element.
.prop("onclick", null).attr("onclick", null)
If event is attached this way, and the target is to be unattached:
$('#container').on('click','span',function(eo){
alert(1);
$(this).off(); //seams easy, but does not work
$('#container').off('click','span'); //clears click event for every span
$(this).on("click",function(){return false;}); //this works.
});
You may be adding the onclick handler as inline markup:
<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />
If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:
$("#addreport").on("click", "", function (e) {
openAdd();
});
Then the jquery has a reference to the event handler and can remove it:
$("#addreport").off("click")
VoidKing mentions this a little more obliquely in a comment above.
If you use $(document).on() to add a listener to a dynamically created element then you may have to use the following to remove it:
// add the listener
$(document).on('click','.element',function(){
// stuff
});
// remove the listener
$(document).off("click", ".element");
To remove ALL event-handlers, this is what worked for me:
To remove all event handlers mean to have the plain HTML structure without all the event handlers attached to the element and its child nodes. To do this, jQuery's clone() helped.
var original, clone;
// element with id my-div and its child nodes have some event-handlers
original = $('#my-div');
clone = original.clone();
//
original.replaceWith(clone);
With this, we'll have the clone in place of the original with no event-handlers on it.
Good Luck...
Updated for 2014
Using the latest version of jQuery, you're now able to unbind all events on a namespace by simply doing $( "#foo" ).off( ".myNamespace" );
Best way to remove inline onclick event is $(element).prop('onclick', null);
Thanks for the information. very helpful i used it for locking page interaction while in edit mode by another user. I used it in conjunction with ajaxComplete. Not necesarily the same behavior but somewhat similar.
function userPageLock(){
$("body").bind("ajaxComplete.lockpage", function(){
$("body").unbind("ajaxComplete.lockpage");
executePageLock();
});
};
function executePageLock(){
//do something
}
In case .on() method was previously used with particular selector, like in the following example:
$('body').on('click', '.dynamicTarget', function () {
// Code goes here
});
Both unbind() and .off() methods are not going to work.
However, .undelegate() method could be used to completely remove handler from the event for all elements which match the current selector:
$("body").undelegate(".dynamicTarget", "click")
I know this comes in late, but why not use plain JS to remove the event?
var myElement = document.getElementById("your_ID");
myElement.onclick = null;
or, if you use a named function as an event handler:
function eh(event){...}
var myElement = document.getElementById("your_ID");
myElement.addEventListener("click",eh); // add event handler
myElement.removeEventListener("click",eh); //remove it
This also works fine .Simple and easy.see http://jsfiddle.net/uZc8w/570/
$('#myimage').removeAttr("click");
if you set the onclick via html you need to removeAttr ($(this).removeAttr('onclick'))
if you set it via jquery (as the after the first click in my examples above) then you need to unbind($(this).unbind('click'))
All the approaches described did not work for me because I was adding the click event with on() to the document where the element was created at run-time:
$(document).on("click", ".button", function() {
doSomething();
});
My workaround:
As I could not unbind the ".button" class I just assigned another class to the button that had the same CSS styles. By doing so the live/on-event-handler ignored the click finally:
// prevent another click on the button by assigning another class
$(".button").attr("class","buttonOff");
Hope that helps.
Hope my below code explains all.
HTML:
(function($){
$("#btn_add").on("click",function(){
$("#btn_click").on("click",added_handler);
alert("Added new handler to button 1");
});
$("#btn_remove").on("click",function(){
$("#btn_click").off("click",added_handler);
alert("Removed new handler to button 1");
});
function fixed_handler(){
alert("Fixed handler");
}
function added_handler(){
alert("new handler");
}
$("#btn_click").on("click",fixed_handler);
$("#btn_fixed").on("click",fixed_handler);
})(jQuery);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button id="btn_click">Button 1</button>
<button id="btn_add">Add Handler</button>
<button id="btn_remove">Remove Handler</button>
<button id="btn_fixed">Fixed Handler</button>
I had an interesting case relevant to this come up at work today where there was a scroll event handler for $(window).
// TO ELIMINATE THE RE-SELECTION AND
// RE-CREATION OF THE SAME OBJECT REDUNDANTLY IN THE FOLLOWING SNIPPETS
let $window = $(window);
$window.on('scroll', function() { .... });
But, to revoke that event handler, we can't just use
$window.off('scroll');
because there are likely other scroll event handlers on this very common target, and I'm not interested in hosing that other functionality (known or unknown) by turning off all of the scroll handlers.
My solution was to first abstract the handler functionality into a named function, and use that in the event listener setup.
function handleScrollingForXYZ() { ...... }
$window.on('scroll', handleScrollingForXYZ);
And then, conditionally, when we need to revoke that, I did this:
$window.off('scroll', $window, handleScrollingForXYZ);
The janky part is the 2nd parameter, which is redundantly selecting the original selector. But, the jquery documentation for .off() only provides one method signature for specifying the handler to remove, which requires this middle parameter to be
A selector which should match the one originally passed to .on() when attaching event handlers.
I haven't ventured to test it out with a null or '' as the 2nd parameter, but perhaps the redundant $window isn't necessary.
I have an input type="image". This acts like the cell notes in Microsoft Excel. If someone enters a number into the text box that this input-image is paired with, I setup an event handler for the input-image. Then when the user clicks the image, they get a little popup to add some notes to the data.
My problem is that when a user enters a zero into the text box, I need to disable the input-image's event handler. I have tried the following, but to no avail.
$('#myimage').click(function { return false; });
jQuery ≥ 1.7
With jQuery 1.7 onward the event API has been updated, .bind()/.unbind() are still available for backwards compatibility, but the preferred method is using the on()/off() functions. The below would now be,
$('#myimage').click(function() { return false; }); // Adds another click event
$('#myimage').off('click');
$('#myimage').on('click.mynamespace', function() { /* Do stuff */ });
$('#myimage').off('click.mynamespace');
jQuery < 1.7
In your example code you are simply adding another click event to the image, not overriding the previous one:
$('#myimage').click(function() { return false; }); // Adds another click event
Both click events will then get fired.
As people have said you can use unbind to remove all click events:
$('#myimage').unbind('click');
If you want to add a single event and then remove it (without removing any others that might have been added) then you can use event namespacing:
$('#myimage').bind('click.mynamespace', function() { /* Do stuff */ });
and to remove just your event:
$('#myimage').unbind('click.mynamespace');
This wasn't available when this question was answered, but you can also use the live() method to enable/disable events.
$('#myimage:not(.disabled)').live('click', myclickevent);
$('#mydisablebutton').click( function () { $('#myimage').addClass('disabled'); });
What will happen with this code is that when you click #mydisablebutton, it will add the class disabled to the #myimage element. This will make it so that the selector no longer matches the element and the event will not be fired until the 'disabled' class is removed making the .live() selector valid again.
This has other benefits by adding styling based on that class as well.
This can be done by using the unbind function.
$('#myimage').unbind('click');
You can add multiple event handlers to the same object and event in jquery. This means adding a new one doesn't replace the old ones.
There are several strategies for changing event handlers, such as event namespaces. There are some pages about this in the online docs.
Look at this question (that's how I learned of unbind). There is some useful description of these strategies in the answers.
How to read bound hover callback functions in jquery
If you want to respond to an event just one time, the following syntax should be really helpful:
$('.myLink').bind('click', function() {
//do some things
$(this).unbind('click', arguments.callee); //unbind *just this handler*
});
Using arguments.callee, we can ensure that the one specific anonymous-function handler is removed, and thus, have a single time handler for a given event. Hope this helps others.
maybe the unbind method will work for you
$("#myimage").unbind("click");
I had to set the event to null using the prop and the attr. I couldn't do it with one or the other. I also could not get .unbind to work. I am working on a TD element.
.prop("onclick", null).attr("onclick", null)
If event is attached this way, and the target is to be unattached:
$('#container').on('click','span',function(eo){
alert(1);
$(this).off(); //seams easy, but does not work
$('#container').off('click','span'); //clears click event for every span
$(this).on("click",function(){return false;}); //this works.
});
You may be adding the onclick handler as inline markup:
<input id="addreport" type="button" value="Add New Report" onclick="openAdd()" />
If so, the jquery .off() or .unbind() won't work. You need to add the original event handler in jquery as well:
$("#addreport").on("click", "", function (e) {
openAdd();
});
Then the jquery has a reference to the event handler and can remove it:
$("#addreport").off("click")
VoidKing mentions this a little more obliquely in a comment above.
If you use $(document).on() to add a listener to a dynamically created element then you may have to use the following to remove it:
// add the listener
$(document).on('click','.element',function(){
// stuff
});
// remove the listener
$(document).off("click", ".element");
To remove ALL event-handlers, this is what worked for me:
To remove all event handlers mean to have the plain HTML structure without all the event handlers attached to the element and its child nodes. To do this, jQuery's clone() helped.
var original, clone;
// element with id my-div and its child nodes have some event-handlers
original = $('#my-div');
clone = original.clone();
//
original.replaceWith(clone);
With this, we'll have the clone in place of the original with no event-handlers on it.
Good Luck...
Updated for 2014
Using the latest version of jQuery, you're now able to unbind all events on a namespace by simply doing $( "#foo" ).off( ".myNamespace" );
Best way to remove inline onclick event is $(element).prop('onclick', null);
Thanks for the information. very helpful i used it for locking page interaction while in edit mode by another user. I used it in conjunction with ajaxComplete. Not necesarily the same behavior but somewhat similar.
function userPageLock(){
$("body").bind("ajaxComplete.lockpage", function(){
$("body").unbind("ajaxComplete.lockpage");
executePageLock();
});
};
function executePageLock(){
//do something
}
In case .on() method was previously used with particular selector, like in the following example:
$('body').on('click', '.dynamicTarget', function () {
// Code goes here
});
Both unbind() and .off() methods are not going to work.
However, .undelegate() method could be used to completely remove handler from the event for all elements which match the current selector:
$("body").undelegate(".dynamicTarget", "click")
I know this comes in late, but why not use plain JS to remove the event?
var myElement = document.getElementById("your_ID");
myElement.onclick = null;
or, if you use a named function as an event handler:
function eh(event){...}
var myElement = document.getElementById("your_ID");
myElement.addEventListener("click",eh); // add event handler
myElement.removeEventListener("click",eh); //remove it
This also works fine .Simple and easy.see http://jsfiddle.net/uZc8w/570/
$('#myimage').removeAttr("click");
if you set the onclick via html you need to removeAttr ($(this).removeAttr('onclick'))
if you set it via jquery (as the after the first click in my examples above) then you need to unbind($(this).unbind('click'))
All the approaches described did not work for me because I was adding the click event with on() to the document where the element was created at run-time:
$(document).on("click", ".button", function() {
doSomething();
});
My workaround:
As I could not unbind the ".button" class I just assigned another class to the button that had the same CSS styles. By doing so the live/on-event-handler ignored the click finally:
// prevent another click on the button by assigning another class
$(".button").attr("class","buttonOff");
Hope that helps.
Hope my below code explains all.
HTML:
(function($){
$("#btn_add").on("click",function(){
$("#btn_click").on("click",added_handler);
alert("Added new handler to button 1");
});
$("#btn_remove").on("click",function(){
$("#btn_click").off("click",added_handler);
alert("Removed new handler to button 1");
});
function fixed_handler(){
alert("Fixed handler");
}
function added_handler(){
alert("new handler");
}
$("#btn_click").on("click",fixed_handler);
$("#btn_fixed").on("click",fixed_handler);
})(jQuery);
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
<button id="btn_click">Button 1</button>
<button id="btn_add">Add Handler</button>
<button id="btn_remove">Remove Handler</button>
<button id="btn_fixed">Fixed Handler</button>
I had an interesting case relevant to this come up at work today where there was a scroll event handler for $(window).
// TO ELIMINATE THE RE-SELECTION AND
// RE-CREATION OF THE SAME OBJECT REDUNDANTLY IN THE FOLLOWING SNIPPETS
let $window = $(window);
$window.on('scroll', function() { .... });
But, to revoke that event handler, we can't just use
$window.off('scroll');
because there are likely other scroll event handlers on this very common target, and I'm not interested in hosing that other functionality (known or unknown) by turning off all of the scroll handlers.
My solution was to first abstract the handler functionality into a named function, and use that in the event listener setup.
function handleScrollingForXYZ() { ...... }
$window.on('scroll', handleScrollingForXYZ);
And then, conditionally, when we need to revoke that, I did this:
$window.off('scroll', $window, handleScrollingForXYZ);
The janky part is the 2nd parameter, which is redundantly selecting the original selector. But, the jquery documentation for .off() only provides one method signature for specifying the handler to remove, which requires this middle parameter to be
A selector which should match the one originally passed to .on() when attaching event handlers.
I haven't ventured to test it out with a null or '' as the 2nd parameter, but perhaps the redundant $window isn't necessary.
I have this bit of code that monitors clicks on <div class="selectable_item">
$(function(){
$("#matchres .selectable_item").on("click", function(){
console.log('Sending request')
$.post("/request", $.param({'crit_id': this.id}), function(){}).fail(function(){console.log("matchres error...");});
return true;});
});
What I'm noticing is when I use the chrome console, for example, to see if there are any $("#matchres .selectable_item"); it finds them, and if I define in the console $("#matchres .selectable_item").on("click", function(){console.log('hi')}); the action is as expected and the console logs correctly. But what I showed you above does not work. Any ideas why that is? Any help would be very much appreciated. As added information, I'm using jquery v1.10.2.
#Hanlet's idea is correct, at the time of document load those items don't exist because you're dynamically creating them, and they do exist by the time you interact with them in the developer console. What you want to do is bind the event handler to a delegate, or an object that will listen for events on child elements.
What you do not want to do is add delegate callbacks to the document when avoidable. Any click on the document will have to check against its event target to see if it should trigger this document delegate callback. You do this enough times and it becomes a performance concern. Instead, pick the closest ancestor element that isn't dynamically created.
For instance, if you're creating .selectable_item dynamically but not #matchres, then add this:
$('#matchres').on('click', '.selectable_item', function () { ... });
Because you add these dynamically, this could be an event delegation issue, very common. Try this instead:
$(document).on("click", "#matchres .selectable_item", function(){ ... }
The problem consists mainly in the fact that you bind these when the DOM is first built, and then you add more elements dynamically, but the event is not bound to these new elements.
Look at these two examples:
http://jsfiddle.net/hescano/aKfWf/
and
http://jsfiddle.net/hescano/aKfWf/1/
I need some help with the callbacks. For some reason, they don't work really well.
I'm making a game with jQuery. I have a <div id='button'></div> for all the buttons that are going to be in the game. The game is going to have two buttons that make actions, and a question on top of it. The question is controlled by a <h3 id='text'></h3>. What I want to know, is that for some reason I can't set callback functions to the button's ID's. In example,
I'd have the yes or no, that have their own id's set through jQuery like this:
$('#button').html('<button id='yes'>Yes</button><button id='no'></button>');
But for some reason, I would be able to set this:
$('yes').click(function(){
//function I would want
});
Of course, that's not what my code has, that was just an example. Here's the real code:
$(document).ready(function(){
$('#main,#batman,#car,#cop,#hobo,#knife,#gangfight,#ganggun,#gangknife,#blood,#hr').hide(-100);
var hr=$('#hr');
var main=$('#main');
var batman=$('#batman');
var car=$('#car');
var hobo=$('#hobo');
var cop=$('#cop');
var knife=$('#knife');
var gangfight=$('#gangfight');
var ganggun=$('#ganggun');
var gangknife=$('#gangknife');
var blood=$('#blood');
var text=$('#text');
var button=$('#button');
$('#start').html('Are you ready to play?');
$('#button').html('<button id="yes">Yes</button><button id="no">No</button>');
$('#yes').click(function(){
$('#yes,#no').hide(function(){
$('#start').hide();
main.fadeIn(-100);
hr.fadeIn(-100,function(){
text.delay(1000).html("You were just wandering around in the streets of new york, when suddenly.. You see batman!! You've never really liked him, what do you do?")
button.html('<button id="fight">Fight</button><button id="leave">Leave</button>',function(){
batman.fadeIn(1000);
$('fight').click(function(){
});
$('leave').click(function(){
text.fadeOut(function(){
text.text('Good call. As you leave, you encounter a hobo. What do you do?');
});
});
});
});
});
});
$('#no').click(function(){
$('#yes,#no').hide();
$('#start').text('Oh, okay then. Come back later!');
});
});
I'm just wondering.. How can I set callback functions to the 'fight' and 'leave'.
If you're wondering why there's all these variables at the start, those are just the images and characters.
You can't set a click handler on an element that doesn't exist. What you should do is use .on to bind a element further up the tree. Something like:
$("#someparentelement").on("click", "#yes", function() {
// your code
});
Which version of jQuery are you using? You should probably use jQuery.on() in this situation since your click handler code probably gets executed before the button is actually available in the DOM.
$("#button").on("click", "#yes", function (event) {
// Your yes-button logic comes here.
});
For more details and possibilities, read about the .on(events [, selector ] [, data ], handler(eventObject)) method in the jQuery documentation:
If selector is omitted or is null, the event handler is referred to as direct or directly-bound. The handler is called every time an event occurs on the selected elements, whether it occurs directly on the element or bubbles from a descendant (inner) element.
When a selector is provided, the event handler is referred to as delegated. The handler is not called when the event occurs directly on the bound element, but only for descendants (inner elements) that match the selector. jQuery bubbles the event from the event target up to the element where the handler is attached (i.e., innermost to outermost element) and runs the handler for any elements along that path matching the selector.
In this case, you want to delegate the event since your element is not yet available in the DOM when you're binding the event.
Don't use the click(), use on('click') and attach it to the document.
Creating a handler this way, will ensure that any new elements will be able to trigger the event.
$('fight') selects fight tag, not the tag with fight id. Try to use $('#fight') instead.