Develop Reference

Reading Data from API response

I'm trying to get specific data from a website API.
This is what I have, which just dumps the entire response into google sheets then I use mid to pull the correct string.
Is there a way to just return the value of "unpaid"?
Here is the response I get:
{"status":"OK","data":{"time":1612834200,"lastSeen":1612834035,"reportedHashrate":154783794,"currentHashrate":131055555.55555557,"validShares":116,"invalidShares":0,"staleShares":3,"averageHashrate":150218750,"activeWorkers":3,"unpaid":26075516667066776,"unconfirmed":null,"coinsPerMin":0.00000787562193181224,"usdPerMin":0.013755797534761213,"btcPerMin":2.9738348414523017e-7}}
All I want out of it is
"unpaid":26075516667066776
Below is the script I'm using to pull that data into google sheets.
function callNumbers() {
var response = UrlFetchApp.fetch("");
Logger.log(response.getContentText());
var data = response.getContentText();
var sheet = SpreadsheetApp.getActiveSheet();
sheet.getRange(49,7).setValue([data]);
}
I can't seem to find much information on this, or I just don't know where to look. I got the above functions from a google page and then adapted them to pull the information from the website address that I wanted.
Thanks

I figured out that i had to change a few things. This what i ended up with.
function callNumbers() {
var response = UrlFetchApp.fetch("URL");
var var2 = JSON.parse(response.getContentText());
var sheet = SpreadsheetApp.getActiveSheet();
sheet.getRange(49,7).setValue([var2.data.unpaid]);
Logger.log(var2.data.unpaid);
}

How to pull data validation from another sheet in Google App Scripts

I'm trying to build a data validation for a cell from a range in a different sheet. I've tried the below code, and I continue to get this error "". Any help would be greatly appreciated.
function dataValidations(){
var builder = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Basic Info");
var invMgmt = SpreadsheetApp.openById("1eGNsJ2iB_IOzcfJe7DyFV_0WhzdQhvW2Lqdzfta2eV4");
var partners = invMgmt.getSheetByName("Partners and Locations").getRange(2,1,75,1).getValues();
var partnerRule = SpreadsheetApp.newDataValidation().requireValueInRange(partners).build();
var origin = builder.getRange("B4");
origin.setDataValidation(partnerRule);
}

In the case of requireValueInRange(range), range is the range object. In your script, the values retrieved by getValues() is 2 dimensional array. I think that this might be the reason of your issue. So in order to remove this issue, how about the following modification?
From:
var partners = invMgmt.getSheetByName("Partners and Locations").getRange(2,1,75,1).getValues();
var partnerRule = SpreadsheetApp.newDataValidation().requireValueInRange(partners).build();
To:
var partners = invMgmt.getSheetByName("Partners and Locations").getRange(2,1,75,1).getValues();
var partnerRule = SpreadsheetApp.newDataValidation().requireValueInList(partners.flat()).build(); // Modified
Note:
When SpreadsheetApp.openById("###").getSheetByName("###").getRange(###) is used for requireValueInRange, no error occurs and the retrieved values are the correct from other Spreadsheet. But when I confirmed the data validation in the cell, it is found that SpreadsheetApp.getActiveSpreadsheet() is used instead of SpreadsheetApp.openById("###"). So in this case, it seems that using requireValueInList is suitable.
References:
requireValueInRange(range)
requireValueInList(values)
flat()

Appending new Google Sheets Data into BigQuery Table

So I'm new to all of this, both BigQuery and AppScript (coding in general..) and I'm learning as I go, so maybe to some my question may seem stupid. Please just hear me out.
I have created a script that loads 10 of the most recent data points into a Google Sheets doc from one of my BigQuery tables. Now, when I manually add new data points to the bottom of this table, I would like to have a load script run that uploads that new data back into BigQuery, and appends it to my original table. I read somewhere that just by inserting a new table the data is automatically appended if the table mentioned already exists. However, I haven't tested that part yet since I get stuck on an error earlier up the line..
Below is the load script I have loosely copied from https://developers.google.com/apps-script/advanced/bigquery
function loadCsv() {
var projectId = 'XX';
var datasetId = 'YY';
var tableId = 'daily_stats_testing';
var file = SpreadsheetApp.getActiveSpreadsheet();
var sheet = file.getActiveSheet().getRange("A12:AK10000").getValues();
var data = sheet.getBlob().setContentType('application/octet-stream');
var job = {
configuration: {
load: {
destinationTable: {
projectId: projectId,
datasetId: datasetId,
tableId: tableId
},
skipLeadingRows: 1
}
}
};
job = BigQuery.Jobs.insert(job, projectId, data);
var Msg = "Load started. Check status of it here:" +
"https://bigquery.cloud.google.com/jobs/%s", projectId
Logger.log(Msg);
Browser.msgBox(Msg);
return;
}
Now the error I get (in a variety of forms, since I've been testing stuff out) is that the BigQuery.Jobs function only accepts Blob data, and that the data from my current sheet (with rage A12 marking the first manually imputed row of data) is not a Blob recognizable data set.
Is there any way (any function?) I can use that will directly convert the selected data range and make it Blob compatible?
Does anyone have any recommendation on how to do this more efficiently?
Unfortunately the script has to load directly out of the current, open Spreadsheet sheet, since it is part of a larger script I will be running. Hopefully this isn't too much of a hinder!
Thanks in advance for the help :)

Is there any way (any function?) I can use that will directly convert the selected data range and make it Blob compatible?
There is actually a function that does convert objects into blob type, namely newBlob(data).
To test this I got a range from my spreadsheet and used it.
function blobTest(){
var sheet = SpreadsheetApp.getActiveSheet();
var range = sheet.getRange("A1:C1");
Logger.log(range); //here, range data is of type Range object
var blob = Utilities.newBlob(range);
Logger.log(blob); //here, range data is now of type Blob object
}

Office-JS API: Fetching filtered data from table

I am trying to figure out a way to fetch only the filtered values from a table if a filter is active in Office-JS API.
Right now the only way I have figured to fetch all the table data is from the table range values property:
var table = tables.getItemAt(0);
var tableRange = table.getRange();
tableRange.load("values");
ctx.sync().then(function () {
// This returns all the values from the table, and not only the visible data
var values = tableRange.values;
});
Any ideas on how I can proceed to fetch only the visible values from the table if a filter is active?
From previous experience with Office Interop I have achieved the same by looping through the different Areas of the table range, but I am unable to find the equivalent to Areas in Office-JS.

The upcoming next wave of features as part of Excel JS APIs 1.3 will include a new object "RangeView" that allows you to read only the visible values off the Range object.
Here's a link to the open spec on GitHub - https://github.com/OfficeDev/office-js-docs/tree/ExcelJs_1.3_OpenSpec/excel.
Note that this isn't available just yet, but will be in the near future.
Usage for your case off a table would look like this:
var table = tables.getItemAt(0);
var visibleView = table.getRange().getVisibleView();
ctx.load(visibleView);
ctx.sync().then(function () {
var values = visibleView.values;
});

One way to get only filtered data is through the Binding.getDataAsync method, which takes a filterType parameter.
Office.select("bindings#myTableBinding1").getDataAsync({
coercionType: "table",
filterType: "onlyVisible"
},function(asyncResult){
var values = (asyncResult.value.rows);
});
This code assumes you have already created a binding to the table. If not, you can run the following code first, which uses the table name to call Bindings.addFromNamedItemAsync:
Office.context.document.bindings.addFromNamedItemAsync("Table1","table",{
id: "myTableBinding1"
},function(asyncResult){
// handle errors and call code sample #1
});
Note that the solution above is supported as far back as Excel 2013 because it uses the shared APIs. The Excel-specific API set doesn't yet have the capability to return only unfiltered data.
-Michael Saunders, PM for Office add-ins

How go I get csv data into netsuite?

I've got an update to my question.
What I really wanted to know was this:
How do I get csv data into netsuite?
Well, it seems I use the csv import tool to create a mapping and use this call to import the csv nlapiSubmitCSVImport(nlobjCSVImport).
Now my question is: How do I iterate through the object?!
That gets me half way - I get the csv data but I can't seem to find out how I iterate through it in order to manipulate the date. This is, of course, the whole point of a scheduled script.
This is really driving me mad.
#Robert H
I can think of a million reasons why you'd want to import data from a CSV. Billing, for instance. Various reports on data any company keeps and I wouldn't want to keep this in the file cabinet nor would I really want to keep the file at all. I just want the data. I want to manipulate it and I want to enter it.

Solution Steps:
To upload a CSV file we have to use a Suitelet script.
(Note: file - This field type is available only for Suitelets and will appear on the main tab of the Suitelet page. Setting the field type to file adds a file upload widget to the page.)
var fileField = form.addField('custpage_file', 'file', 'Select CSV File');
var id = nlapiSubmitFile(file);
Let's prepare to call a Restlet script and pass the file id to it.
var recordObj = new Object();
recordObj.fileId = fileId;
// Format input for Restlets for the JSON content type
var recordText = JSON.stringify(recordObj);//stringifying JSON
// Setting up the URL of the Restlet
var url = 'https://rest.na1.netsuite.com/app/site/hosting/restlet.nl?script=108&deploy=1';
// Setting up the headers for passing the credentials
var headers = new Array();
headers['Content-Type'] = 'application/json';
headers['Authorization'] = 'NLAuth nlauth_email=amit.kumar2#mindfiresolutions.com, nlauth_signature=*password*, nlauth_account=TSTDRV****, nlauth_role=3';
(Note: nlapiCreateCSVImport: This API is only supported for bundle installation scripts, scheduled scripts, and RESTlets)
Let's call the Restlet using nlapiRequestURL:
// Calling Restlet
var output = nlapiRequestURL(url, recordText, headers, null, "POST");
Create a mapping using Import CSV records available at Setup > Import/Export > Import CSV records.
Inside the Restlet script Fetch the file id from the Restlet parameter. Use nlapiCreateCSVImport() API and set its mapping with mapping id created in step 3. Set the CSV file using the setPrimaryFile() function.
var primaryFile = nlapiLoadFile(datain.fileId);
var job = nlapiCreateCSVImport();
job.setMapping(mappingFileId); // Set the mapping
// Set File
job.setPrimaryFile(primaryFile.getValue()); // Fetches the content of the file and sets it.
Submit using nlapiSubmitCSVImport().
nlapiSubmitCSVImport(job); // We are done
There is another way we can get around this although neither preferable nor would I suggest. (As it consumes a lot of API's if you have a large number of records in your CSV file.)
Let's say that we don't want to use the nlapiCreateCSVImport API, so let's continue from the step 4.
Just fetch the file Id as we did earlier, load the file, and get its contents.
var fileContent = primaryFile.getValue();
Split the lines of the file, then subsequently split the words and store the values into separate arrays.
var splitLine = fileContent.split("\n"); // Splitting the file on the basis of lines.
for (var lines = 1,count=0; lines < splitLine.length; lines++)
{
var words = (splitLine[lines]).split(","); // words stores all the words on a line
for (var word = 0; word < words.length; word++)
{
nlapiLogExecution("DEBUG", "Words:",words[word]);
}
}
Note: Make sure you don't have an additional blank line in your CSV file.
Finally create the record and set field values from the array that we created above.
var myRec = nlapiCreateRecord('cashsale'); // Here you create the record of your choice
myRec.setFieldValue('entity', arrCustomerId[i]); // For example, arrCustomerId is an array of customer ID.
var submitRec = nlapiSubmitRecord(myRec); // and we are done

fellow NetSuite user here, I've been using SuiteScripts for a while now but never saw nlobjCSVImport object nor nlapiSubmitCSVImport .. I looked in the documentation, it shows, but there is no page describing the details, care to share where you got the doc from?
With the doc for the CSVImport object I might be able to provide some more help.
P.S. I tried posting this message as a comment but the "Add comment" link didn't show up for some reason. Still new to SOF

CSV to JSON:
convert csv file to json object datatable
https://code.google.com/p/jquery-csv/
If you know the structure of the CSV file, just do a for loop and map the fields to the corresponding nlapiSetValue.
Should be pretty straightforward.