Variable scope with jQuery and javascript - javascript

So, I wrote the following function:
function getData() {
var data;
$(function () {
$.getJSON('https://ipinfo.io', function (ipinfo) {
data = ipinfo;
console.log(data);
})
})
console.log(data);
}
The problem with the above is the 2nd console.log doesn't retain the info from the assignment inside the jQuery and logs an undefined object. I'm not exactly sure what is wrong, but I believe it to be something quite minor. However, as much as I've searched online, I haven't found an answer for this particular problem.

One line: Javascript is Asynchronous.
While many struggle to figure out what it exactly means, a simple example could possibly explain you that.
You request some data from a URL.
When the data from second URL is received, you wish to set a variable with the received data.
You wish to use this outside the request function's callback (after making the request).
For a conventional programmer, it is very hard to grasp that the order of execution in case of JavaScript will not be 1,2 and then 3 but rather 1,3,2.
Why this happens is because of Javascript's event-loop mechanism where each asynchronous action is tied with an event and callbacks are called only when the event occurs. Meanwhile, the code outside the callback function executes without holding on for the event to actually occur.
In your case:
var data;
$(function () {
$.getJSON('https://ipinfo.io', function (ipinfo) {//async function's callback
data = ipinfo;
console.log(data);//first console output
})
})
console.log(data);//second console output
While the async function's callback is executed when the data is received from the $.getJSON function, javascript proceeds further without waiting for the callback to assign the value to the data variable, causing you to log undefined in the console (which is the value of the data variable when you call console.log.
I hope I was able to explain that.!

Related

how to handle asynchronously: function C depending on function B depending on function A

I have three functions that all work with data from a global object. This global object gets filled with data from a local array in one function and with data from an ajax request with the second function. The third function relies on the data in the object, so the ajax request must have been completed.
I believe I am misunderstanding callbacks. Here's what I do:
var currentCharacter = {}
// this function gets the local data and then calls the second function
function loadData(getMarvelData) {
// do things to fill currentCharacter
getMarvelData(); // this is the callback to the next function (no ?)
}
// this function performs the ajax request, then calls the third function
function getMarvelData(getGoogleMap) {
// do ajax request and add stuff to currentCharacter
getGoogleMap(); // this is the callback to the final function (no ?)
}
function getGoogleMap() {
// do Google Map related stuff with data from currentCharacter
}
I thought setting a function as an argument of another function and then executing it would make the function dependent on the other before it continues. Clearly I still misunderstand callbacks after trying to make it work for a week now. As it is, the getMarvelData function doesn't even get called because I never see the alert popup and the currentCharacter object only has data from the loadData function.
Could somebody show the correct approach for my code, or if my approach of making these three functions is even the right one for this scenario.
The full repository is available at: https://github.com/ChaMbuna/Marvel-Map
V0.9 was actually working but the ajax call was set to run synchronous (it still is btw) Since then I've been overhauling my code to make it work asynchronously and to remove all jQuery (this is a Udacity project and removing jQuery was suggested by an instructor).
Appreciate the help
I have not enough reputation to put a comment, but a wild guess, you should remove the argument in loadData&getMarvelData or actually pass a function in calls to those function.
You have to pass the parameters correctly.
Try this:
var currentCharacter = {}
loadData(getMarvelData, getGoogleMap);
function loadData(f1, f2) {
// do sth.
f1(f2);
}
function getMarvelData(f2) {
// do sth.
f2();
}
function getGoogleMap() {
// do sth.
}
I havn't tested it, but it should work.

how do i callback with js function [duplicate]

This question already has answers here:
How do I return the response from an asynchronous call?
(41 answers)
Closed 9 years ago.
I'm having trouble with callbacks mainly because I don't understand how they're working (or supposed to work).
I have my function:
function checkDuplicateIndex(values, callback) {
$.ajax({
type: "POST",
url: url,
data: "command=checkIndexAlbumTracks&" + values,
dataType: "html",
success: function(data){
var returnValue = data.d;
callback(returnValue);
}
});
}
And then within a submit event, how do I properly call checkDuplicateIndex so that I can alert() the value?
This ended up being a long answer, so I'm going to try to split it into pieces.
Functions in Javascript
So within javascript, a function is an object that can be passed around, assigned to a variable, etc, just like any other data type. The difference is that a function, rather than being a string of text, number, etc, is a block of code waiting to be executed.
This is often confusing to people starting out with programming because usually when you write code, it is executed when you run the program. But for functions, this is not the case. When you write code inside a function, it waits there not executing until you call the function. If you do not call the function, the code is never executed. Let's check out a quick example:
function say_hello(){
console.log('hello!');
}
What you see here is called a function declaration. This means you are creating a function, which is a block of code waiting to be executed. If you run this code, nothing will be logged to the console. Now let's look at a function call.
function say_hello(){
console.log('hello!');
}
say_hello();
So here we declare the function just like before, but below we call it. A function call is just the name of the function followed by open and close parens. If the function takes arguments, they will be inside the parens, but no need to worry about that for now. If you were to run this code, you would in fact see hello! logged to the console, because the function was called, which executes the code inside.
Asynchronous Code
Now, let's switch gears for a second. When you make a jquery ajax call, jquery abstracts a lot of code into the library. They take care of setting up the XMLHttpRequest, firing it off to the place you specify, and collecting the result, and they do this in a way that works cross-browser. But since javascript is asynchronous, as soon as the ajax call goes off, javascript keeps executing code after the ajax call, because who wants to wait around for someone else's server to respond while you could be still getting in that work. So if you fire off something like this:
$.ajax({
url: 'http://google.com',
success: function(){ console.log('done!') }
});
console.log('after ajax call');
...you may be surprised to find that it logs after ajax call before logging done!. This is because, as stated earlier, in javascript calls that deal with I/O are often asynchronous.
So if the ajax call is made and it immediately continues executing code even if the ajax call has not finished, how can we specify code that will run when it's finished? This is where everything comes together. By providing jquery with a function, which as we remember is a block of unexecuted code, we can provide a way for ourselves to write code that is executed only after the ajax call has finished by passing the block of unexecuted code to jquery and saying essetially "hey jquery, take this code, and when the ajax call is finished, call it and pass in any data you got out of it." How convenient!
The way we do this is through the success and error properites of jquery's ajax function. If the request was successful, it will call the function we pass to success, and I assume you can guess what happens if there was an error.
Putting It All Together
Asynchronous code and first class functions are two of the most confusing parts about javascript, and once you understand these two concepts, you'll be in a great spot, although it may take a while to get there. So it's important to think carefully about it and experiment. Let's talk through a couple ways to handle the example you are working with here, about jquery ajax.
First, we can try making our own function and passing the name of the function to the success handler. Then when it comes back, it will call the function. Let's take a look:
var my_callback = function(data){
console.log(data);
}
$.ajax({
url: 'http://google.com',
success: my_callback
});
This is an interesting way of doing it. Here we have assigned an anonymous function to a variable, then passed the variable name to the success handler. This will work fine. Now let's try another way:
function my_callback(data){
console.log(data);
}
$.ajax({
url: 'http://google.com',
success: my_callback
});
Here, we define a named function and do the same thing. This will work the same way. Named functions in javascript can actually be declared after the are used, so you could move the function declaration below the ajax call and it would still work. Try this out. This is a nice advantage to named functions.
Finally, let's take a look at a third way we could handle it:
$.ajax({
url: 'http://google.com',
success: function(data){
console.log(data);
}
});
Here, we define an anonymous function right inline on the success handler. This works exactly the same as either of the other two options. In all three of these ways, jquery receives a function declaration, and calls it when it needs to, which is after the ajax request has come back.
I know this is a super long answer, but what you are confused about here are some of the core concepts of javascript, and I thought it would be more helpful to go over them here than to just solve your problem and give you the answer without explanation of the concepts. In fact, I haven't actually tackled your problem here at all, but you will easily be able to solve it yourself after understanding these concepts. If you are still having trouble, drop a comment and I'll try to clarify more.
Given the above code, you would call it like this within your submit handler:
var values = '…';
checkDuplicateIndex(values, function(returnValue) {
alert(returnValue);
// additional processing here...
});

Possible Javascript scope issue

I'm sort of a noob with this so please forgive me :)
I can't get this one part of the function to update the variable. Could anyone possibly take a look a see what I'm doing wrong?
http://pastie.org/private/zfnv8v2astglabluo89ta
From line 142 thru 172 I'm not getting any results in the end. I've tested inside that function to make sure it is actually returning data, but the "body" variable is passing back up after line 172. So if I look at my generated HTML on the page, it simply looks the function skips from 140 to 174.
Thanks for any feedback!!
Your $.get is asynchronous. That means it will finish sometime AFTER the rest of the code, thus you won't see it's effect on the body variable inside that function. Instead, it's success callback function will be called long after this function has already finished.
To chain multiple asynchronous ajax calls like you have here, you can't just use normal sequential programming because asynchronous ajax calls aren't sequential. The network request is sent, then your javascript continues executing and SOMETIME LATER when the response arrives, the success handler is called and is executed.
To run sequential ajax calls like you have, you have to nest the work inside the success handler so that the ONLY code that uses the response is actually in the success handler. In pseudo-code, it looks like this:
$.get(..., function(data) {
// operate on the results only in here
// a second ajax function that uses the data from the first
// or adds onto the data from the first
$.get(..., function(data) {
// now finally, you have all the data
// so you can continue on with your logic here
});
// DO NOT PUT ANYTHING HERE that uses the responses from the ajax calls
// because that data will not yet be available here
});
You cannot do what you're doing which is like this:
var myVariable;
$.get(..., function(data) {
// add something to myVariable
});
$.get(..., function(data) {
// add something to myVariable
});
$.get(..., function(data) {
// add something to myVariable
});
// do something with myVariable
None of those ajax calls will have completed before the end of your function. You have to follow a design pattern like in my first example.
For more advanced tools, one can always use jQuery deferreds which are just a different way of defining code to run after an ajax call is done. It looks a little more like sequential programming even though it's really just scheduling code to run the same way my first code example does.
Function 8 will be invoke after line 174-180. You must put code from 174-180 line to the end of function

Ajax event handler does not update variables?

I'm having issues getting a variable declared in an .click function to be updated in a Get function within the click function. I've gathered that even though the variable has the same name, within the Get function it is really declaring it anew.
I've tried to find examples helping me, but it appears to me that the Get method is such a specialized function that the examples didn't seem to apply.
I would like the value of 'SettingContentToEdit' to get updated with information retrieved with the Get function.
Below is the code.
Thank you for your help!
$(".cellSetting").click(function () {
var clickedClass = $(this).attr("class");
var clickedItemID = $(this).attr("id")
var SettingContentToEdit = "not changed";
var JSONSend = {
'ItemName': clickedItemID, //send the item name so the model knows which one to pull up!
'ItemSetting': clickedClass
};
$.get(
'/Home/getItem',
JSONSend,
function (data) {
// $('#dialog').html(data.ItemSettings[data.SettingToEdit]);
SettingContentToEdit = data.ItemSettings[data.SettingToEdit];
alert(SettingContentToEdit); //returns the correct info
}
);
alert(SettingContentToEdit); //returns "not changed"
});
Your issue is that your ajax call is asyncronous. The success handler for the get() function is called some time after your click handler and the alert() has already completed. You can refer to the local variables in your success handler, but the code that follows the success handler executes BEFORE the success handler does.
This is because your get() operate is asynchronous. Calling it just STARTS the networking operation and then your javascript execution continues (while the networking operation works in the background). After starting the networking operation, your alert() is called. Then, some time LATER, the Ajax call completes and the success handler is executed.
This is a very common mistake and has indeed been asked and answered hundreds (if not thousands) of times here on SO (I've personally probably answered 20-30) so you are not alone in missing this understanding at first.
If you want to use the results of the ajax operation, then you need to put the code that does that either in your success handler or put it in a function that you call from your success handler. You cannot put it after the get() function because it will execute too soon before the results are known.
AJAX is asynchronous. If you check SettingContentToEdit a second or so later than you are doing, you'd see the value has updated.
Either put your code inside the get function (where you have your alert showing the correct value) or make the request synchronous (you'll have to look up the jQuery docs because I don't use jQuery).

How do I use an FB.api(JS SDK) response outside of the callback function?

I am not having any issues with logging in or even calling the api, I just have an issue with getting the response outside of the api callback. I know that it runs asynchronously so I would like to put it in a function that would return the response. Here is my idea
//What I would like to be able to do
function fbUser(){
FB.api('/me', function(response){
//this logs the correct object
console.log(response);
});
//How do I get the response out here?
return response;
}
I would like to call the /me api function once in the beginning and then pass it around to my view objects (I just use the response inside of Backbone Views) and depending on what is needed make other api calls. I currently have certain things working by calling the view from inside of the callback
//What I am doing now, but I lose the ability to pass anything other than the
//the current response to this function/View
FB.api('/me', function(response){
var newView = new facebookView({model: response});
});
I orginally was trying this, but because the api call is asynchronous I had issues with things being undefined
//What I started with but had async issues
var fbResponse;
FB.api('/me', function(response){
fbResponse = response;
});
//I would then try and use fbResponse but it would be undefined
I lose the first response when I make the second. For example my first api call is to /me to get the user info. I can then call /your-fb-id/photos and get photos, but if I make the call to another function inside of the photo api callback I only can reference that response I lost the original /me response. If I could get the response out of the callback then I would be able to pass it as needed. I understand that response is only valid inside of the callback, so how do I make it valid outside of the callback while taking into account it's asynchronousness?
OK everyone I figured this out. It took me a long time and reading many different pages. What I said I wanted to do all deals with callbacks and closures. I will first cover the callback issue. Because the FB.api function is asynchronous you never know when it will return. You can stop Javascript or set a timer, but that is a horrible way to do this. You need a callback. In fact the FB.api is using a callback. That's what the anonymous function as the second parameter is. What I did was create another function that called fbUser and used a callback. Here is what I did:
function startThis() {
var getUser = fbUser(function(model){
console.log(model);
startapp(model);
});
};
function fbUser(callback){
FB.api('/me', function(response){
callback(response);
});
}
The startThis function is called on a positive Facebook auth response. It then calls the fbUser function which has a callback. The callback returns the callback from the FB.api function. Because startThis uses that callback with the return value being called model, the other code will not execute until the callback returns. No more undefined issues. These functions are just wrappers to get the Facebook response to my views. I may have added one too many layers of abstraction, but if you want to pass around the response this is the way.
Secondly I wanted to pass this response on to another view. For example one view loads basic info (using the response from fbUser). I now want to pass that to another view that loads photos (I know this is not best practices MVC, but by using Facebook I don't have much control over the Model). The problem I had though was I couldn't pass the original response to the next view because inside of the callback function for the FB.api call this refers to the Window and not the object I was in. Solution: closures. I won't explain this perfectly, but a closure is a local variable inside of a function that still has a reference inside of an anonymous function. Here is my solution which should illustrate what I am talking about:
photos: function(){
var This = this;
var apiString = '/' + this.model.id + '/photos';
FB.api(apiString, function(response){
loadPhoto(response, 1, This.model);
});
The function loadPhoto is a wrapper to load a photo view (I know backbone can help me with loading different views, but I was tackling one problem at a time). It takes the photo api call as the model, a number as an offset, and the origanl response. The first line in this function sets this to a local variable This. That allows me inside of the anonymous callback function to reference the object this was called from.
I hope this can help someone as I spent a lot of hours and a lot of testing time to find the solution to this. If you don't know about how callbacks or closures work it is hard to find the information you are looking for.

Categories

Resources