I am working on a real time canvas drawing webapp using socket.io, node.js, and p5.js. I am having trouble creating a smooth line when the mouse is dragged. If the mouse is dragged too fast there is a trail of empty space in between each ellipse. The end goal here is to create a smooth path. Here are the things I have tried so far:
Attempt 1:
noStroke();
fill(lineColor[0],lineColor[1],lineColor[2]);
ellipse(mouseX, mouseY, lineThickness, lineThickness);
Attempt 2:
strokeWeight(lineThickness);
line(mouseX,mouseY);
stroke(lineColor[0],lineColor[1],lineColor[2]);
Here is a picture of what the issue looks like:
canvas drawing incomplete path image
any feedback is welcome; thanks!
Kevin's answer is great because it will be more efficient to draw lines instead of many ellipses. You should also look into:
beginShape()/endShape()
bezierVertex()
curveVertex()
curvePoint()
The above should help you draw a smooth path and setting a thicker stroke will looks as it many filled ellipses are connected forming the path.
If for some reason you do want to draw many ellipses, you can interpolate position when the mouse move faster and create gaps to fill those gaps.
For more information and p5.js example, check out this answer:
Processing: Draw vector instead of pixels
You could use the pmouseX and pmouseY variables, which hold the previous position of the cursor. Use that to draw a line from the previous position to the current position to fill in the blank space between mouse events.
From the reference:
// Move the mouse across the canvas to leave a trail
function setup() {
//slow down the frameRate to make it more visible
frameRate(10);
}
function draw() {
background(244, 248, 252);
line(mouseX, mouseY, pmouseX, pmouseY);
print(pmouseX + " -> " + mouseX);
}
<script src="https://github.com/processing/p5.js/releases/download/0.5.11/p5.js"></script>
Related
I want to draw a line on a picture while having an ellipse following the mouse at the mouse position. I have developed the following code, the ellipse always draw on the picture.
function setup() {
createCanvas(400, 400);
}
function draw() {
//background(220);
line(pmouseX, pmouseY, mouseX, mouseY);
fill(255, 0, 0);
ellipse(mouseX, mouseY, 7, 7);
}
You can see that the ellipse is always draw on the picture. How can I remove the ellipse after it shows once?
I am expecting a line is drawn on the picture while an ellipse is shown at the mouse position. The ellipse should not draw on the image, I only follow the mouse location, however, the line will draw on the picture.
I think I understand now what you want.
If you uncomment the background instruction, you will erase the lines drawn so far. If you comment the background the lines will remain, but also the ellipses.
So, for that you need the instruction cursor() that allows you to use a custom mouse cursor.
So, what I would suggest is: Create an image file that contains an ellipse and the background is transparent.
Specify that you want a cursor from a file, by doing
cursor("myCursorImage.png")
Take a look at the reference of the cursor that I provided in a link to see the different parameters you can pass to cursor()
I am having a problem with drawing circles on a canvas. When I draw a circle on my canvas it works fine, but if I draw a square afterwards, the color of my circle changes to the same color as the square.
This has been troubling me for a while now. Here is a jsbin project to demonstrate what I am talking about:
https://jsbin.com/bajezudayi/edit?html,js,output
On this canvas you can draw circles and squares (note the check box at the top to switch shapes).
I have tried changing the color variable in the drawCircle to a set value instead of being a function argument but the problem persists.
function drawCircle(x,y,rad,col,ctx){
// This function draws a circle on a canvas
ctx.save();
ctx.translate(x,y);
ctx.beginPath();
ctx.arc(0,0,rad,0,2*Math.PI,false);
ctx.fillStyle='red'; // rather than =col
ctx.fill();
ctx.restore();
}
If I apply an animation loop to my canvas, even weirder effects start to happen because of this issue.
Any ideas why this is happening?
Thank you.
Edit:
Here is the full project I am currently working on:
http://adam-day-com.stackstaging.com/orbital/index.html
Try checking the 'show vector field' box and add some planets. The function to draw the vector field (called in an animation loop) draws a series of thin boxes and it messes up the circle colors.
I added ctx.beginPath() and ctx.closePath() and things seem to working fine. Is this what you wanted? https://jsbin.com/ribiyodoru/edit?html,js,output
I have the start of a project here and ran into a little issue.
https://jsfiddle.net/kylebrown219/gn10Lh8g/
In the jsFiddle you can click and create as many circles as you wish. When you press 'Spawn' you will see a Rectangle move across the screen. How do I get rid of the trail, without erasing the circles behind it?
I think this is where the issue is:
context.clearRect(myRectangle.x, myRectangle.y, myRectangle.width, myRectangle.height);
Thanks!
Depending on your needs; if you just are after animation you can use this little trick:
Set the current content of canvas as background to the element before drawing the rectangle:
canvas.style.backgroundImage = "url(" + canvas.toDataURL() + ")";
Then, when animating, clear the whole canvas, then redraw rectangle at current position:
context.clearRect(0,0,canvas.width,canvas.height);
drawRectangle(myRectangle, context);
Modified fiddle
To clear everything just reset the background style ("none") and clear.
You will of course have to limit the spawn button, or store the circles (as objects) for redraw (which in that case you could have used to redraw the background).
I am working on a school project that includes these conditions:
Make maze with using only JS, HTML5 and CSS.
Make a torch effect around the character. You cannot light through walls.
I started making this game with the use of canvas.
I have succeeded to make a torch effect around the character as shown here:
http://people.inf.elte.hu/tunyooo/web2/HTML5-Maze.html
However, I cannot make it NOT to light through walls.
I am fairly sure I should do something like this:
Start a loop in all directions from the current position of the character up until it reaches the view distance OR if the context.getImageData() returns [0,0,0,255]. This way, I could get the character's distance from northern, eastern, western and southern walls.
Then, I could light the maze around the character with a (viewdistance-DistanceFrom*Wall) rectangle.
Unfortunately though, after 15 hours of thinking about this I am running out of ideas how to make this work.
Any tips are appreciated.
A simpler way of doing this is (ps: I get a "forbidden" error on the link provided so i cannot see what you did):
Have a matte version of the maze, a transparent and white image where white represent allowed drawing areas. This matte image should match the maze image in size and placement.
Create an off-screen canvas the size of the torch image
When you need to draw the torch first draw the matte image into the off-screen canvas. Draw it offset so the correct part of the matte is drawn. For example: if the torch will be drawn at position 100, 100 on the maze then draw the matte into the off-screen canvas at -100,-100 - or simply create the canvas the same size as the maze and draw in the matte at 0,0 and the torch at the relative position. More memory is used but simpler to maintain.
Change composite mode to source-in and then draw the torch. Change composite mode back to copy for the next draw.
Now your torch is clipped to fit within the wall. Now simply draw the off-screen canvas to your main canvas instead of the torch.
Note: it's important that the torch is made such as it cannot reach the other side of the wall (diameter size) or it will instead shine "under" the maze walls - this can be solved other ways though by using matte for different zones which is chosen depending on player position (not shown here).
To move in the demo below just move the mouse over the canvas area.
Live demo
function mousemoved(e) {
var rect = canvas.getBoundingClientRect(), // adjust mouse pos.:
x = e.clientX - rect.left - iTorch.width * 0.5, // center of torch
y = e.clientY - rect.top - iTorch.height * 0.5;
octx.drawImage(iMatte, 0, 0); // draw matte to off-screen
octx.globalCompositeOperation = 'source-in'; // change comp mode
octx.drawImage(iTorch, x, y); // clip torch
octx.globalCompositeOperation = 'copy'; // change comp mode for next
ctx.drawImage(iMaze, 0, 0); // redraw maze
ctx.drawImage(ocanvas, 0, 0); // draw clipped torch on top
}
In the demo the torch is of more or less random size, a bit too big in fact - something I made quick and dirty. But try to move within the maze path to see it being clipped. The off-screen canvas is added on the size of the main canvas to show what goes on.
An added bonus is that you could use the same matte for hit-testing.
Make your maze hallways into clipping paths.
Your torch effects will be contained within the clipping paths.
[ Addition to answer based on questioner's comments ]
To create a clipping path from your existing maze image:
Open up your maze image in a Paint program. The mouse cursors X/Y position are usually displayed as you move over the maze image.
Record the top-left and bottom-right of each maze hallway in an array.
var hallways=[];
hallways.push({left:100, y:50, right: 150, bottom: 65}); // for each hallway
Listen for mouse events and determine which hallway the mouse is in.
// hallwayIndex is the index of the hallway the mouse is inside
var hallwayIndex=-1;
// x=mouse's x coordinate, y=mouse's y coordinate
for(var i=0;i<hallways;i++){
var hall=hallways[i];
if(x>=hall.left &&
x<=hall.right &&
y>=hall.top &&
y<=hall.bottom)
{ hallwayIndex=i; }
}
Redraw the maze on the canvas
Create a clipping path for the current hallway:
var width=hall.right-hall.left;
var height=hall.bottom-hall.top;
ctx.beginPath();
ctx.Rect(hall.left,hall.top,width,height);
ctx.clip();
Draw the player+torch into the hallway (the torch will not glow thru the walls).
There is a brilliant article on this topic: http://www.redblobgames.com/articles/visibility/
Doing it accurately like that, however, is a lot of work. If you want to go with a quick and dirty solution, I would suggest the following. Build the world from large blocks (think retro pixels). This makes collision detection simpler too. Now you can consider all points within the torch radius. Walk in a straight line from the character to the point. If you reach the point without hitting a wall, make it bright.
(You could do the same with 1-pixel blocks too, but you might hit performance issues.)
I am trying to achieve grass like bend on a straight line created by using Cubic bezier curve.I have created a straight line using Bezier curve and now i want to bend it from top.But the problem I am facing is I am not able to do it dynamically.The moment I use mousemove for creating the bend,series of curves appear giving the canvas a paint like look which is somthing I dont want.I just want a single curved line.My question is how do I clear the previous lines that have been drawn and restore the latest bended curve??
My CODE:here is my code if you want to have a look at it
Create two canvases stacked on top of each other:
The first one containing the static content, the other only the dynamic content.
This way you will only need to be concerned about clearing the area the grass was drawn in (and this is much faster too as there is no need to redraw static all the time).
Place the two canvases inside a div which have position set to relative, then place the canvases using position set to absolute.
Now you can make a function to draw the static content (you will need to redraw it if the browser window gets resized etc.).
Record the area the grass is drawn within and clear only this (for each grass) in the next frame.
If this last is too complicated, just use a simple clear on the "dynamic" canvas:
ctxDyn.clear(0, 0, canvasDyn.width, canvasDyn.height);
This will also preserve transparency of this canvas, or "layer" if you like.
Use requestAnimationFrame to do the actual animation.
var isPlaying = true;
function animate() {
ctxDyn.clear(0, 0, canvasDyn.width, canvasDyn.height);
drawGrass(); //function to draw the actual grass
if (isPlaying) requestAnimationFrame(animate);
}
animate(); // start
The isPlaying is a flag you can toggle with a button on screen or something similar, to be able to stop the animation. See the link for requestAnimationFrame on how to make this cross-browser as this is still a "young" implementation.
dynCtx and dynCanvas can of course be called what you want.
You need to erase the current contents of the canvas before redrawing your updated "grass". This would involve redrawing everything else that is "static" on the canvas. For example:
function redraw() {
// Erase the current contents
ctx.fillStyle = 'white';
ctx.fill(0, 0, canvas.width, canvas.height);
// Draw the stuff that does not change from frame to frame
drawStaticContent();
// Draw the dynamic content
drawGrass();
}
In your mousemove event, update your grass curve information, then 'redraw'.