Related
Is it possible to seed the random number generator (Math.random) in JavaScript?
No, it is not possible to seed Math.random(). The ECMAScript specification is intentionally vague on the subject, providing no means for seeding nor require that browsers even use the same algorithm. So such a function must be externally provided, which thankfully isn't too difficult.
I've implemented a number of good, short and fast Pseudorandom number generator (PRNG) functions in plain JavaScript. All of them can be seeded and provide high quality numbers. These are not intended for security purposes--if you need a seedable CSPRNG, look into ISAAC.
First of all, take care to initialize your PRNGs properly. To keep things simple, the generators below have no built-in seed generating procedure, but accept one or more 32-bit numbers as the initial seed state of the PRNG. Similar or sparse seeds (e.g. a simple seed of 1 and 2) have low entropy, and can cause correlations or other randomness quality issues, sometimes resulting in the output having similar properties (such as randomly generated levels being similar). To avoid this, it is best practice to initialize PRNGs with a well-distributed, high entropy seed and/or advancing past the first 15 or so numbers.
There are many ways to do this, but here are two methods. Firstly, hash functions are very good at generating seeds from short strings. A good hash function will generate very different results even when two strings are similar, so you don't have to put much thought into the string. Here's an example hash function:
function cyrb128(str) {
let h1 = 1779033703, h2 = 3144134277,
h3 = 1013904242, h4 = 2773480762;
for (let i = 0, k; i < str.length; i++) {
k = str.charCodeAt(i);
h1 = h2 ^ Math.imul(h1 ^ k, 597399067);
h2 = h3 ^ Math.imul(h2 ^ k, 2869860233);
h3 = h4 ^ Math.imul(h3 ^ k, 951274213);
h4 = h1 ^ Math.imul(h4 ^ k, 2716044179);
}
h1 = Math.imul(h3 ^ (h1 >>> 18), 597399067);
h2 = Math.imul(h4 ^ (h2 >>> 22), 2869860233);
h3 = Math.imul(h1 ^ (h3 >>> 17), 951274213);
h4 = Math.imul(h2 ^ (h4 >>> 19), 2716044179);
return [(h1^h2^h3^h4)>>>0, (h2^h1)>>>0, (h3^h1)>>>0, (h4^h1)>>>0];
}
Calling cyrb128 will produce a 128-bit hash value from a string which can be used to seed a PRNG. Here's how you might use it:
// Create cyrb128 state:
var seed = cyrb128("apples");
// Four 32-bit component hashes provide the seed for sfc32.
var rand = sfc32(seed[0], seed[1], seed[2], seed[3]);
// Only one 32-bit component hash is needed for mulberry32.
var rand = mulberry32(seed[0]);
// Obtain sequential random numbers like so:
rand();
rand();
Note: If you want a slightly more robust 128-bit hash, consider MurmurHash3_x86_128, it's more thorough, but intended for use with large arrays.
Alternatively, simply choose some dummy data to pad the seed with, and advance the generator beforehand a few times (12-20 iterations) to mix the initial state thoroughly. This has the benefit of being simpler, and is often used in reference implementations of PRNGs, but it does limit the number of initial states:
var seed = 1337 ^ 0xDEADBEEF; // 32-bit seed with optional XOR value
// Pad seed with Phi, Pi and E.
// https://en.wikipedia.org/wiki/Nothing-up-my-sleeve_number
var rand = sfc32(0x9E3779B9, 0x243F6A88, 0xB7E15162, seed);
for (var i = 0; i < 15; i++) rand();
Note: the output of these PRNG functions produce a positive 32-bit number (0 to 232-1) which is then converted to a floating-point number between 0-1 (0 inclusive, 1 exclusive) equivalent to Math.random(), if you want random numbers of a specific range, read this article on MDN. If you only want the raw bits, simply remove the final division operation.
JavaScript numbers can only represent whole integers up to 53-bit resolution. And when using bitwise operations, this is reduced to 32. Modern PRNGs in other languages often use 64-bit operations, which require shims when porting to JS that can drastically reduce performance. The algorithms here only use 32-bit operations, as it is directly compatible with JS.
Now, onward to the the generators. (I maintain the full list with references and license info here)
sfc32 (Simple Fast Counter)
sfc32 is part of the PractRand random number testing suite (which it passes of course). sfc32 has a 128-bit state and is very fast in JS.
function sfc32(a, b, c, d) {
return function() {
a >>>= 0; b >>>= 0; c >>>= 0; d >>>= 0;
var t = (a + b) | 0;
a = b ^ b >>> 9;
b = c + (c << 3) | 0;
c = (c << 21 | c >>> 11);
d = d + 1 | 0;
t = t + d | 0;
c = c + t | 0;
return (t >>> 0) / 4294967296;
}
}
You may wonder what the | 0 and >>>= 0 are for. These are essentially 32-bit integer casts, used for performance optimizations. Number in JS are basically floats, but during bitwise operations, they switch into a 32-bit integer mode. This mode is processed faster by JS interpreters, but any multiplication or addition will cause it to switch back to a float, resulting in a performance hit.
Mulberry32
Mulberry32 is a simple generator with a 32-bit state, but is extremely fast and has good quality randomness (author states it passes all tests of gjrand testing suite and has a full 232 period, but I haven't verified).
function mulberry32(a) {
return function() {
var t = a += 0x6D2B79F5;
t = Math.imul(t ^ t >>> 15, t | 1);
t ^= t + Math.imul(t ^ t >>> 7, t | 61);
return ((t ^ t >>> 14) >>> 0) / 4294967296;
}
}
I would recommend this if you just need a simple but decent PRNG and don't need billions of random numbers (see Birthday problem).
xoshiro128**
As of May 2018, xoshiro128** is the new member of the Xorshift family, by Vigna & Blackman (professor Vigna was also responsible for the Xorshift128+ algorithm powering most Math.random implementations under the hood). It is the fastest generator that offers a 128-bit state.
function xoshiro128ss(a, b, c, d) {
return function() {
var t = b << 9, r = a * 5; r = (r << 7 | r >>> 25) * 9;
c ^= a; d ^= b;
b ^= c; a ^= d; c ^= t;
d = d << 11 | d >>> 21;
return (r >>> 0) / 4294967296;
}
}
The authors claim it passes randomness tests well (albeit with caveats). Other researchers have pointed out that it fails some tests in TestU01 (particularly LinearComp and BinaryRank). In practice, it should not cause issues when floats are used (such as in these implementations), but may cause issues if relying on the raw lowest order bit.
JSF (Jenkins' Small Fast)
This is JSF or 'smallprng' by Bob Jenkins (2007), who also made ISAAC and SpookyHash. It passes PractRand tests and should be quite fast, although not as fast as sfc32.
function jsf32(a, b, c, d) {
return function() {
a |= 0; b |= 0; c |= 0; d |= 0;
var t = a - (b << 27 | b >>> 5) | 0;
a = b ^ (c << 17 | c >>> 15);
b = c + d | 0;
c = d + t | 0;
d = a + t | 0;
return (d >>> 0) / 4294967296;
}
}
No, it is not possible to seed Math.random(), but it's fairly easy to write your own generator, or better yet, use an existing one.
Check out: this related question.
Also, see David Bau's blog for more information on seeding.
NOTE: Despite (or rather, because of) succinctness and apparent elegance, this algorithm is by no means a high-quality one in terms of randomness. Look for e.g. those listed in this answer for better results.
(Originally adapted from a clever idea presented in a comment to another answer.)
var seed = 1;
function random() {
var x = Math.sin(seed++) * 10000;
return x - Math.floor(x);
}
You can set seed to be any number, just avoid zero (or any multiple of Math.PI).
The elegance of this solution, in my opinion, comes from the lack of any "magic" numbers (besides 10000, which represents about the minimum amount of digits you must throw away to avoid odd patterns - see results with values 10, 100, 1000). Brevity is also nice.
It's a bit slower than Math.random() (by a factor of 2 or 3), but I believe it's about as fast as any other solution written in JavaScript.
No, but here's a simple pseudorandom generator, an implementation of Multiply-with-carry I adapted from Wikipedia (has been removed since):
var m_w = 123456789;
var m_z = 987654321;
var mask = 0xffffffff;
// Takes any integer
function seed(i) {
m_w = (123456789 + i) & mask;
m_z = (987654321 - i) & mask;
}
// Returns number between 0 (inclusive) and 1.0 (exclusive),
// just like Math.random().
function random()
{
m_z = (36969 * (m_z & 65535) + (m_z >> 16)) & mask;
m_w = (18000 * (m_w & 65535) + (m_w >> 16)) & mask;
var result = ((m_z << 16) + (m_w & 65535)) >>> 0;
result /= 4294967296;
return result;
}
Antti Sykäri's algorithm is nice and short. I initially made a variation that replaced JavaScript's Math.random when you call Math.seed(s), but then Jason commented that returning the function would be better:
Math.seed = function(s) {
return function() {
s = Math.sin(s) * 10000; return s - Math.floor(s);
};
};
// usage:
var random1 = Math.seed(42);
var random2 = Math.seed(random1());
Math.random = Math.seed(random2());
This gives you another functionality that JavaScript doesn't have: multiple independent random generators. That is especially important if you want to have multiple repeatable simulations running at the same time.
Please see Pierre L'Ecuyer's work going back to the late 1980s and early 1990s. There are others as well. Creating a (pseudo) random number generator on your own, if you are not an expert, is pretty dangerous, because there is a high likelihood of either the results not being statistically random or in having a small period. Pierre (and others) have put together some good (pseudo) random number generators that are easy to implement. I use one of his LFSR generators.
https://www.iro.umontreal.ca/~lecuyer/myftp/papers/handstat.pdf
Combining some of the previous answers, this is the seedable random function you are looking for:
Math.seed = function(s) {
var mask = 0xffffffff;
var m_w = (123456789 + s) & mask;
var m_z = (987654321 - s) & mask;
return function() {
m_z = (36969 * (m_z & 65535) + (m_z >>> 16)) & mask;
m_w = (18000 * (m_w & 65535) + (m_w >>> 16)) & mask;
var result = ((m_z << 16) + (m_w & 65535)) >>> 0;
result /= 4294967296;
return result;
}
}
var myRandomFunction = Math.seed(1234);
var randomNumber = myRandomFunction();
It's not possible to seed the builtin Math.random function, but it is possible to implement a high quality RNG in Javascript with very little code.
Javascript numbers are 64-bit floating point precision, which can represent all positive integers less than 2^53. This puts a hard limit to our arithmetic, but within these limits you can still pick parameters for a high quality Lehmer / LCG random number generator.
function RNG(seed) {
var m = 2**35 - 31
var a = 185852
var s = seed % m
return function () {
return (s = s * a % m) / m
}
}
Math.random = RNG(Date.now())
If you want even higher quality random numbers, at the cost of being ~10 times slower, you can use BigInt for the arithmetic and pick parameters where m is just able to fit in a double.
function RNG(seed) {
var m_as_number = 2**53 - 111
var m = 2n**53n - 111n
var a = 5667072534355537n
var s = BigInt(seed) % m
return function () {
return Number(s = s * a % m) / m_as_number
}
}
See this paper by Pierre l'Ecuyer for the parameters used in the above implementations:
https://www.ams.org/journals/mcom/1999-68-225/S0025-5718-99-00996-5/S0025-5718-99-00996-5.pdf
And whatever you do, avoid all the other answers here that use Math.sin!
To write your own pseudo random generator is quite simple.
The suggestion of Dave Scotese is useful but, as pointed out by others, it is not quite uniformly distributed.
However, it is not because of the integer arguments of sin. It's simply because of the range of sin, which happens to be a one dimensional projection of a circle. If you would take the angle of the circle instead it would be uniform.
So instead of sin(x) use arg(exp(i * x)) / (2 * PI).
If you don't like the linear order, mix it a bit up with xor. The actual factor doesn't matter that much either.
To generate n pseudo random numbers one could use the code:
function psora(k, n) {
var r = Math.PI * (k ^ n)
return r - Math.floor(r)
}
n = 42; for(k = 0; k < n; k++) console.log(psora(k, n))
Please also note that you cannot use pseudo random sequences when real entropy is needed.
Many people who need a seedable random-number generator in Javascript these days are using David Bau's seedrandom module.
Math.random no, but the ran library solves this. It has almost all distributions you can imagine and supports seeded random number generation. Example:
ran.core.seed(0)
myDist = new ran.Dist.Uniform(0, 1)
samples = myDist.sample(1000)
Here's the adopted version of Jenkins hash, borrowed from here
export function createDeterministicRandom(): () => number {
let seed = 0x2F6E2B1;
return function() {
// Robert Jenkins’ 32 bit integer hash function
seed = ((seed + 0x7ED55D16) + (seed << 12)) & 0xFFFFFFFF;
seed = ((seed ^ 0xC761C23C) ^ (seed >>> 19)) & 0xFFFFFFFF;
seed = ((seed + 0x165667B1) + (seed << 5)) & 0xFFFFFFFF;
seed = ((seed + 0xD3A2646C) ^ (seed << 9)) & 0xFFFFFFFF;
seed = ((seed + 0xFD7046C5) + (seed << 3)) & 0xFFFFFFFF;
seed = ((seed ^ 0xB55A4F09) ^ (seed >>> 16)) & 0xFFFFFFFF;
return (seed & 0xFFFFFFF) / 0x10000000;
};
}
You can use it like this:
const deterministicRandom = createDeterministicRandom()
deterministicRandom()
// => 0.9872818551957607
deterministicRandom()
// => 0.34880331158638
No, like they said it is not possible to seed Math.random()
but you can install external package which make provision for that. i used these package which can be install using these command
npm i random-seed
the example is gotten from the package documentation.
var seed = 'Hello World',
rand1 = require('random-seed').create(seed),
rand2 = require('random-seed').create(seed);
console.log(rand1(100), rand2(100));
follow the link for documentation https://www.npmjs.com/package/random-seed
SIN(id + seed) is a very interesting replacement for RANDOM functions that cannot be seeded like SQLite:
https://stackoverflow.com/a/75089040/7776828
Most of the answers here produce biased results. So here's a tested function based on seedrandom library from github:
!function(f,a,c){var s,l=256,p="random",d=c.pow(l,6),g=c.pow(2,52),y=2*g,h=l-1;function n(n,t,r){function e(){for(var n=u.g(6),t=d,r=0;n<g;)n=(n+r)*l,t*=l,r=u.g(1);for(;y<=n;)n/=2,t/=2,r>>>=1;return(n+r)/t}var o=[],i=j(function n(t,r){var e,o=[],i=typeof t;if(r&&"object"==i)for(e in t)try{o.push(n(t[e],r-1))}catch(n){}return o.length?o:"string"==i?t:t+"\0"}((t=1==t?{entropy:!0}:t||{}).entropy?[n,S(a)]:null==n?function(){try{var n;return s&&(n=s.randomBytes)?n=n(l):(n=new Uint8Array(l),(f.crypto||f.msCrypto).getRandomValues(n)),S(n)}catch(n){var t=f.navigator,r=t&&t.plugins;return[+new Date,f,r,f.screen,S(a)]}}():n,3),o),u=new m(o);return e.int32=function(){return 0|u.g(4)},e.quick=function(){return u.g(4)/4294967296},e.double=e,j(S(u.S),a),(t.pass||r||function(n,t,r,e){return e&&(e.S&&v(e,u),n.state=function(){return v(u,{})}),r?(c[p]=n,t):n})(e,i,"global"in t?t.global:this==c,t.state)}function m(n){var t,r=n.length,u=this,e=0,o=u.i=u.j=0,i=u.S=[];for(r||(n=[r++]);e<l;)i[e]=e++;for(e=0;e<l;e++)i[e]=i[o=h&o+n[e%r]+(t=i[e])],i[o]=t;(u.g=function(n){for(var t,r=0,e=u.i,o=u.j,i=u.S;n--;)t=i[e=h&e+1],r=r*l+i[h&(i[e]=i[o=h&o+t])+(i[o]=t)];return u.i=e,u.j=o,r})(l)}function v(n,t){return t.i=n.i,t.j=n.j,t.S=n.S.slice(),t}function j(n,t){for(var r,e=n+"",o=0;o<e.length;)t[h&o]=h&(r^=19*t[h&o])+e.charCodeAt(o++);return S(t)}function S(n){return String.fromCharCode.apply(0,n)}if(j(c.random(),a),"object"==typeof module&&module.exports){module.exports=n;try{s=require("crypto")}catch(n){}}else"function"==typeof define&&define.amd?define(function(){return n}):c["seed"+p]=n}("undefined"!=typeof self?self:this,[],Math);
function randIntWithSeed(seed, max=1) {
/* returns a random number between [0,max] including zero and max
seed can be either string or integer */
return Math.round(new Math.seedrandom('seed' + seed)()) * max
}
test for true randomness of this code: https://es6console.com/kkjkgur2/
There are plenty of good answers here but I had a similar issue with the additional requirement that I would like portability between Java's random number generator and whatever I ended up using in JavaScript.
I found the java-random package
These two pieces of code had identical output assuming the seed is the same:
Java:
Random randomGenerator = new Random(seed);
int randomInt;
for (int i=0; i<10; i++) {
randomInt = randomGenerator.nextInt(50);
System.out.println(randomInt);
}
JavaScript:
let Random = require('java-random');
let rng = new Random(seed);
for (let i=0; i<10; i++) {
let val = rng.nextInt(50);
console.log(val);
}
Do what bryc suggests ... but before you use his cyrb128 hash function to initialise, note that the return statement throws away 32 bits of entropy. Exclusive-or the four values together = 0. You should probably make the first element (h2^h3^h4) >>> 0.
I have written a function that returns a seeded random number, it uses Math.sin to have a long random number and uses the seed to pick numbers from that.
Use :
seedRandom("k9]:2#", 15)
it will return your seeded number
the first parameter is any string value ; your seed.
the second parameter is how many digits will return.
function seedRandom(inputSeed, lengthOfNumber){
var output = "";
var seed = inputSeed.toString();
var newSeed = 0;
var characterArray = ['0','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f','g','h','i','j','k','l','m','n','o','p','q','r','s','t','u','v','w','y','x','z','A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','U','R','S','T','U','V','W','X','Y','Z','!','#','#','$','%','^','&','*','(',')',' ','[','{',']','}','|',';',':',"'",',','<','.','>','/','?','`','~','-','_','=','+'];
var longNum = "";
var counter = 0;
var accumulator = 0;
for(var i = 0; i < seed.length; i++){
var a = seed.length - (i+1);
for(var x = 0; x < characterArray.length; x++){
var tempX = x.toString();
var lastDigit = tempX.charAt(tempX.length-1);
var xOutput = parseInt(lastDigit);
addToSeed(characterArray[x], xOutput, a, i);
}
}
function addToSeed(character, value, a, i){
if(seed.charAt(i) === character){newSeed = newSeed + value * Math.pow(10, a)}
}
newSeed = newSeed.toString();
var copy = newSeed;
for(var i=0; i<lengthOfNumber*9; i++){
newSeed = newSeed + copy;
var x = Math.sin(20982+(i)) * 10000;
var y = Math.floor((x - Math.floor(x))*10);
longNum = longNum + y.toString()
}
for(var i=0; i<lengthOfNumber; i++){
output = output + longNum.charAt(accumulator);
counter++;
accumulator = accumulator + parseInt(newSeed.charAt(counter));
}
return(output)
}
A simple approach for a fixed seed:
function fixedrandom(p){
const seed = 43758.5453123;
return (Math.abs(Math.sin(p)) * seed)%1;
}
In PHP, there is function srand(seed) which generate fixed random value for particular seed.
But, in JS, there is no such inbuilt function.
However, we can write simple and short function.
Step 1: Choose some Seed (Fix Number).
var seed = 100;
Number should be Positive Integer and greater than 1, further explanation in Step 2.
Step 2: Perform Math.sin() function on Seed, it will give sin value of that number. Store this value in variable x.
var x;
x = Math.sin(seed); // Will Return Fractional Value between -1 & 1 (ex. 0.4059..)
sin() method returns a Fractional value between -1 and 1.And we don't need Negative value, therefore, in first step choose number greater than 1.
Step 3: Returned Value is a Fractional value between -1 and 1. So mulitply this value with 10 for making it more than 1.
x = x * 10; // 10 for Single Digit Number
Step 4: Multiply the value with 10 for additional digits
x = x * 10; // Will Give value between 10 and 99 OR
x = x * 100; // Will Give value between 100 and 999
Multiply as per requirement of digits.
The result will be in decimal.
Step 5: Remove value after Decimal Point by Math's Round (Math.round()) Method.
x = Math.round(x); // This will give Integer Value.
Step 6: Turn Negative Values into Positive (if any) by Math.abs method
x = Math.abs(x); // Convert Negative Values into Positive(if any)
Explanation End.Final Code
var seed = 111; // Any Number greater than 1
var digit = 10 // 1 => single digit, 10 => 2 Digits, 100 => 3 Digits and so. (Multiple of 10)
var x; // Initialize the Value to store the result
x = Math.sin(seed); // Perform Mathematical Sin Method on Seed.
x = x * 10; // Convert that number into integer
x = x * digit; // Number of Digits to be included
x = Math.round(x); // Remove Decimals
x = Math.abs(x); // Convert Negative Number into Positive
Clean and Optimized Functional Code
function random_seed(seed, digit = 1) {
var x = Math.abs(Math.round(Math.sin(seed++) * 10 * digit));
return x;
}
Then Call this function using
random_seed(any_number, number_of_digits)any_number is must and should be greater than 1.number_of_digits is optional parameter and if nothing passed, 1 Digit will return.
random_seed(555); // 1 Digit
random_seed(234, 1); // 1 Digit
random_seed(7895656, 1000); // 4 Digit
For a number between 0 and 100.
Number.parseInt(Math.floor(Math.random() * 100))
Lets say I have something setup like this
var num = 1 << 9 //equals 512
//OR
num = 1 << 6 //equals 64
//OR
num = 1 << 6 ^ 1 << 9 //equals 576
//OR
num = 1 << 6 ^ 1 << 9 ^ 1 << 1 ^ 1 << 8 //equals 834
I am trying to take a number, say 834 and put it through a function to reverse it and get all the numbers that made it when I made the left shift value, in this case of 834, the numbers that made it were 6, 9, 1, and 8.
OR, I want to take the variable num and get all the X values in 1 << X ^ 1 << X and turn it into an array.
So
var values = [0,1,2,3,6,7,8,9,10,12,14,16,17] //this can occur as X in 1 << X
function bitNumberToArray(bitNumber) {
var arr = [];
// what do I put here?
return arr;
}
console.log(bitNumberToArray(834))
//returns [1, 6, 8, 9] *ORDER DOESN'T MATTER*
If you are curious in what I'm doing, I'm fetching a user then getting their flag (which is just a bit number) and converting it into something user-friendly like This user is staff, holds badge X on Discord
I have no idea where to start on this, a nudge in the right direction would help.
You need to convert your number to binary and then collect all positive bits' positions like this:
function bitNumberToArray(n) {
const bits = [...n.toString(2)].map(Number);
return bits.reduce((result, bit, index) => result.concat(bit ? bits.length - index - 1 : []), []);
}
Test:
const test = bitNumberToArray(834);
// returns [9, 8, 6, 1]
you need to check the bitwise AND for each bit like this:
var values = [0,1,2,3,6,7,8,9,10,12,14,16,17]; //this can occur as X in 1 << X
function bitNumberToArray(bitNumber) {
return values.filter(bit => bitNumber & 1 << bit );
}
console.log(bitNumberToArray(834));
This is simply the binary representation of the number
834 for example, is equal to 2^9 + 2^8 + 2^6 + 2
function getBinaryRepr(num){
let repr = []
while(num > 0){
repr.push(num % 2) //Parity
num = Math.floor(num/2) //Integer division
}
return repr //this is the binary representation of num
}
To get those X's from here:
getBinaryRepr(num).map((x,index) => x==0 ? x : index)
or better than that:
getBinaryRepr(num).map(x => x==0 ? x : 2^x)
and then simply add them to get the number
Edit: noticed now you don't want the 0's at all, so:
getBinaryRepr(num).filter(x => x != 0).map((x,index) => x==0 ? x : index) //or x==1
I am using nodeJS to parse some HEX string, I am trying to convert the HEX value into a integer value using parseInt but I am running into some difficulties with the negative number that I don't understand the reason why.
I have the following HEX string D3FFBDFFF900 that is ecoding the following integers x:-0.45*100 y:-0.67*100 z:2.49*100 in the this way
D3FF | BDFF | F900 => -0.45*100 | -0.64*100 | 2.49*100
And I have created the following code snippet ( and I do now that the division by 100 is being missed there )
var x = "D3FFBDFFF900".substring(0,4);
var y = "D3FFBDFFF900".substring(4,8);
var z = "D3FFBDFFF900".substring(8);
console.log("x:"+x);
console.log("y:"+y);
console.log("z:"+z);
console.log("parseInt x "+parseInt(x.toString(16),16));
console.log("parseInt y "+parseInt(y.toString(16),16));
console.log("parseInt z "+parseInt(z.toString(16),16));
Why isn't parseInt been able to decode at least the values x=-45, y=-67 and z=249 and instead I have the above output?
Thanks in advance,
EDIT: the way of encoding the data is like below, where the print just print the original HEX string into a serial bus
#define NIBBLE_TO_HEX_CHAR(i) ((i <= 9) ? ('0' + i) : ('A' - 10 + i))
#define HIGH_NIBBLE(i) ((i >> 4) & 0x0F)
#define LOW_NIBBLE(i) (i & 0x0F)
for (int i = 0; i < size; ++i) {
print(static_cast<char>(NIBBLE_TO_HEX_CHAR(HIGH_NIBBLE(payload[i]))));
print(static_cast<char>(NIBBLE_TO_HEX_CHAR(LOW_NIBBLE(payload[i]))));
}
and the values x,y,z are got as below where type of accelerometer.getX() -> double
x = (int16_t)(accelerometer.getX()*100)
y = (int16_t)(accelerometer.getX()*100)
z = (int16_t)(accelerometer.getX()*100)
How should the parser know, that you swapped the nibbles and use hex with 4 digits?
0xD3FF = 15 * 1 + 15 * 16 + 3 * 256 + 13 * 4096 = 54271
-45 = -0x2D
-67 = -0x43
249 = 0xF9
The parser does a correct job.
To parse the received hex values you have to swap the high and low nibbles:
D3FF => FFD3
Next you have to parse the hex to dec. If your value >= 0x8000 you have to invert the binary representation and add 1
0xFFD3 = 65491 > 0x8000 = 32768
-(~65491 & 0xFFFF) + 1 = -43
How can I take an octet from the buffer and turn it into a binary sequence?
I want to decode protocol rfc1035 through node.js but find it difficult to work with bits.
Here is a code, but it does not suit me - because it is a blackbox for me:
var sliceBits = function(b, off, len) {
var s = 7 - (off + len - 1);
b = b >>> s;
return b & ~(0xff << len);
};
Use a bitmask, an octet is 8 bits so you can do something like the following:
for (var i = 7; i >= 0; i--) {
var bit = octet & (1 << i) ? 1 : 0;
// do something with the bit (push to an array if you want a sequence)
}
Example: http://jsfiddle.net/3NUVq/
You could probably make this more efficient, but the approach is pretty straightforward. This loops over an offset i, from 7 down to 0, and finds the ith bit using the bitmask 1 << i. If the ith bit is set then bit becomes 1, otherwise it will be 0.
Is it possible to seed the random number generator (Math.random) in JavaScript?
No, it is not possible to seed Math.random(). The ECMAScript specification is intentionally vague on the subject, providing no means for seeding nor require that browsers even use the same algorithm. So such a function must be externally provided, which thankfully isn't too difficult.
I've implemented a number of good, short and fast Pseudorandom number generator (PRNG) functions in plain JavaScript. All of them can be seeded and provide high quality numbers. These are not intended for security purposes--if you need a seedable CSPRNG, look into ISAAC.
First of all, take care to initialize your PRNGs properly. To keep things simple, the generators below have no built-in seed generating procedure, but accept one or more 32-bit numbers as the initial seed state of the PRNG. Similar or sparse seeds (e.g. a simple seed of 1 and 2) have low entropy, and can cause correlations or other randomness quality issues, sometimes resulting in the output having similar properties (such as randomly generated levels being similar). To avoid this, it is best practice to initialize PRNGs with a well-distributed, high entropy seed and/or advancing past the first 15 or so numbers.
There are many ways to do this, but here are two methods. Firstly, hash functions are very good at generating seeds from short strings. A good hash function will generate very different results even when two strings are similar, so you don't have to put much thought into the string. Here's an example hash function:
function cyrb128(str) {
let h1 = 1779033703, h2 = 3144134277,
h3 = 1013904242, h4 = 2773480762;
for (let i = 0, k; i < str.length; i++) {
k = str.charCodeAt(i);
h1 = h2 ^ Math.imul(h1 ^ k, 597399067);
h2 = h3 ^ Math.imul(h2 ^ k, 2869860233);
h3 = h4 ^ Math.imul(h3 ^ k, 951274213);
h4 = h1 ^ Math.imul(h4 ^ k, 2716044179);
}
h1 = Math.imul(h3 ^ (h1 >>> 18), 597399067);
h2 = Math.imul(h4 ^ (h2 >>> 22), 2869860233);
h3 = Math.imul(h1 ^ (h3 >>> 17), 951274213);
h4 = Math.imul(h2 ^ (h4 >>> 19), 2716044179);
return [(h1^h2^h3^h4)>>>0, (h2^h1)>>>0, (h3^h1)>>>0, (h4^h1)>>>0];
}
Calling cyrb128 will produce a 128-bit hash value from a string which can be used to seed a PRNG. Here's how you might use it:
// Create cyrb128 state:
var seed = cyrb128("apples");
// Four 32-bit component hashes provide the seed for sfc32.
var rand = sfc32(seed[0], seed[1], seed[2], seed[3]);
// Only one 32-bit component hash is needed for mulberry32.
var rand = mulberry32(seed[0]);
// Obtain sequential random numbers like so:
rand();
rand();
Note: If you want a slightly more robust 128-bit hash, consider MurmurHash3_x86_128, it's more thorough, but intended for use with large arrays.
Alternatively, simply choose some dummy data to pad the seed with, and advance the generator beforehand a few times (12-20 iterations) to mix the initial state thoroughly. This has the benefit of being simpler, and is often used in reference implementations of PRNGs, but it does limit the number of initial states:
var seed = 1337 ^ 0xDEADBEEF; // 32-bit seed with optional XOR value
// Pad seed with Phi, Pi and E.
// https://en.wikipedia.org/wiki/Nothing-up-my-sleeve_number
var rand = sfc32(0x9E3779B9, 0x243F6A88, 0xB7E15162, seed);
for (var i = 0; i < 15; i++) rand();
Note: the output of these PRNG functions produce a positive 32-bit number (0 to 232-1) which is then converted to a floating-point number between 0-1 (0 inclusive, 1 exclusive) equivalent to Math.random(), if you want random numbers of a specific range, read this article on MDN. If you only want the raw bits, simply remove the final division operation.
JavaScript numbers can only represent whole integers up to 53-bit resolution. And when using bitwise operations, this is reduced to 32. Modern PRNGs in other languages often use 64-bit operations, which require shims when porting to JS that can drastically reduce performance. The algorithms here only use 32-bit operations, as it is directly compatible with JS.
Now, onward to the the generators. (I maintain the full list with references and license info here)
sfc32 (Simple Fast Counter)
sfc32 is part of the PractRand random number testing suite (which it passes of course). sfc32 has a 128-bit state and is very fast in JS.
function sfc32(a, b, c, d) {
return function() {
a >>>= 0; b >>>= 0; c >>>= 0; d >>>= 0;
var t = (a + b) | 0;
a = b ^ b >>> 9;
b = c + (c << 3) | 0;
c = (c << 21 | c >>> 11);
d = d + 1 | 0;
t = t + d | 0;
c = c + t | 0;
return (t >>> 0) / 4294967296;
}
}
You may wonder what the | 0 and >>>= 0 are for. These are essentially 32-bit integer casts, used for performance optimizations. Number in JS are basically floats, but during bitwise operations, they switch into a 32-bit integer mode. This mode is processed faster by JS interpreters, but any multiplication or addition will cause it to switch back to a float, resulting in a performance hit.
Mulberry32
Mulberry32 is a simple generator with a 32-bit state, but is extremely fast and has good quality randomness (author states it passes all tests of gjrand testing suite and has a full 232 period, but I haven't verified).
function mulberry32(a) {
return function() {
var t = a += 0x6D2B79F5;
t = Math.imul(t ^ t >>> 15, t | 1);
t ^= t + Math.imul(t ^ t >>> 7, t | 61);
return ((t ^ t >>> 14) >>> 0) / 4294967296;
}
}
I would recommend this if you just need a simple but decent PRNG and don't need billions of random numbers (see Birthday problem).
xoshiro128**
As of May 2018, xoshiro128** is the new member of the Xorshift family, by Vigna & Blackman (professor Vigna was also responsible for the Xorshift128+ algorithm powering most Math.random implementations under the hood). It is the fastest generator that offers a 128-bit state.
function xoshiro128ss(a, b, c, d) {
return function() {
var t = b << 9, r = a * 5; r = (r << 7 | r >>> 25) * 9;
c ^= a; d ^= b;
b ^= c; a ^= d; c ^= t;
d = d << 11 | d >>> 21;
return (r >>> 0) / 4294967296;
}
}
The authors claim it passes randomness tests well (albeit with caveats). Other researchers have pointed out that it fails some tests in TestU01 (particularly LinearComp and BinaryRank). In practice, it should not cause issues when floats are used (such as in these implementations), but may cause issues if relying on the raw lowest order bit.
JSF (Jenkins' Small Fast)
This is JSF or 'smallprng' by Bob Jenkins (2007), who also made ISAAC and SpookyHash. It passes PractRand tests and should be quite fast, although not as fast as sfc32.
function jsf32(a, b, c, d) {
return function() {
a |= 0; b |= 0; c |= 0; d |= 0;
var t = a - (b << 27 | b >>> 5) | 0;
a = b ^ (c << 17 | c >>> 15);
b = c + d | 0;
c = d + t | 0;
d = a + t | 0;
return (d >>> 0) / 4294967296;
}
}
No, it is not possible to seed Math.random(), but it's fairly easy to write your own generator, or better yet, use an existing one.
Check out: this related question.
Also, see David Bau's blog for more information on seeding.
NOTE: Despite (or rather, because of) succinctness and apparent elegance, this algorithm is by no means a high-quality one in terms of randomness. Look for e.g. those listed in this answer for better results.
(Originally adapted from a clever idea presented in a comment to another answer.)
var seed = 1;
function random() {
var x = Math.sin(seed++) * 10000;
return x - Math.floor(x);
}
You can set seed to be any number, just avoid zero (or any multiple of Math.PI).
The elegance of this solution, in my opinion, comes from the lack of any "magic" numbers (besides 10000, which represents about the minimum amount of digits you must throw away to avoid odd patterns - see results with values 10, 100, 1000). Brevity is also nice.
It's a bit slower than Math.random() (by a factor of 2 or 3), but I believe it's about as fast as any other solution written in JavaScript.
No, but here's a simple pseudorandom generator, an implementation of Multiply-with-carry I adapted from Wikipedia (has been removed since):
var m_w = 123456789;
var m_z = 987654321;
var mask = 0xffffffff;
// Takes any integer
function seed(i) {
m_w = (123456789 + i) & mask;
m_z = (987654321 - i) & mask;
}
// Returns number between 0 (inclusive) and 1.0 (exclusive),
// just like Math.random().
function random()
{
m_z = (36969 * (m_z & 65535) + (m_z >> 16)) & mask;
m_w = (18000 * (m_w & 65535) + (m_w >> 16)) & mask;
var result = ((m_z << 16) + (m_w & 65535)) >>> 0;
result /= 4294967296;
return result;
}
Antti Sykäri's algorithm is nice and short. I initially made a variation that replaced JavaScript's Math.random when you call Math.seed(s), but then Jason commented that returning the function would be better:
Math.seed = function(s) {
return function() {
s = Math.sin(s) * 10000; return s - Math.floor(s);
};
};
// usage:
var random1 = Math.seed(42);
var random2 = Math.seed(random1());
Math.random = Math.seed(random2());
This gives you another functionality that JavaScript doesn't have: multiple independent random generators. That is especially important if you want to have multiple repeatable simulations running at the same time.
Please see Pierre L'Ecuyer's work going back to the late 1980s and early 1990s. There are others as well. Creating a (pseudo) random number generator on your own, if you are not an expert, is pretty dangerous, because there is a high likelihood of either the results not being statistically random or in having a small period. Pierre (and others) have put together some good (pseudo) random number generators that are easy to implement. I use one of his LFSR generators.
https://www.iro.umontreal.ca/~lecuyer/myftp/papers/handstat.pdf
Combining some of the previous answers, this is the seedable random function you are looking for:
Math.seed = function(s) {
var mask = 0xffffffff;
var m_w = (123456789 + s) & mask;
var m_z = (987654321 - s) & mask;
return function() {
m_z = (36969 * (m_z & 65535) + (m_z >>> 16)) & mask;
m_w = (18000 * (m_w & 65535) + (m_w >>> 16)) & mask;
var result = ((m_z << 16) + (m_w & 65535)) >>> 0;
result /= 4294967296;
return result;
}
}
var myRandomFunction = Math.seed(1234);
var randomNumber = myRandomFunction();
It's not possible to seed the builtin Math.random function, but it is possible to implement a high quality RNG in Javascript with very little code.
Javascript numbers are 64-bit floating point precision, which can represent all positive integers less than 2^53. This puts a hard limit to our arithmetic, but within these limits you can still pick parameters for a high quality Lehmer / LCG random number generator.
function RNG(seed) {
var m = 2**35 - 31
var a = 185852
var s = seed % m
return function () {
return (s = s * a % m) / m
}
}
Math.random = RNG(Date.now())
If you want even higher quality random numbers, at the cost of being ~10 times slower, you can use BigInt for the arithmetic and pick parameters where m is just able to fit in a double.
function RNG(seed) {
var m_as_number = 2**53 - 111
var m = 2n**53n - 111n
var a = 5667072534355537n
var s = BigInt(seed) % m
return function () {
return Number(s = s * a % m) / m_as_number
}
}
See this paper by Pierre l'Ecuyer for the parameters used in the above implementations:
https://www.ams.org/journals/mcom/1999-68-225/S0025-5718-99-00996-5/S0025-5718-99-00996-5.pdf
And whatever you do, avoid all the other answers here that use Math.sin!
To write your own pseudo random generator is quite simple.
The suggestion of Dave Scotese is useful but, as pointed out by others, it is not quite uniformly distributed.
However, it is not because of the integer arguments of sin. It's simply because of the range of sin, which happens to be a one dimensional projection of a circle. If you would take the angle of the circle instead it would be uniform.
So instead of sin(x) use arg(exp(i * x)) / (2 * PI).
If you don't like the linear order, mix it a bit up with xor. The actual factor doesn't matter that much either.
To generate n pseudo random numbers one could use the code:
function psora(k, n) {
var r = Math.PI * (k ^ n)
return r - Math.floor(r)
}
n = 42; for(k = 0; k < n; k++) console.log(psora(k, n))
Please also note that you cannot use pseudo random sequences when real entropy is needed.
Many people who need a seedable random-number generator in Javascript these days are using David Bau's seedrandom module.
Math.random no, but the ran library solves this. It has almost all distributions you can imagine and supports seeded random number generation. Example:
ran.core.seed(0)
myDist = new ran.Dist.Uniform(0, 1)
samples = myDist.sample(1000)
Here's the adopted version of Jenkins hash, borrowed from here
export function createDeterministicRandom(): () => number {
let seed = 0x2F6E2B1;
return function() {
// Robert Jenkins’ 32 bit integer hash function
seed = ((seed + 0x7ED55D16) + (seed << 12)) & 0xFFFFFFFF;
seed = ((seed ^ 0xC761C23C) ^ (seed >>> 19)) & 0xFFFFFFFF;
seed = ((seed + 0x165667B1) + (seed << 5)) & 0xFFFFFFFF;
seed = ((seed + 0xD3A2646C) ^ (seed << 9)) & 0xFFFFFFFF;
seed = ((seed + 0xFD7046C5) + (seed << 3)) & 0xFFFFFFFF;
seed = ((seed ^ 0xB55A4F09) ^ (seed >>> 16)) & 0xFFFFFFFF;
return (seed & 0xFFFFFFF) / 0x10000000;
};
}
You can use it like this:
const deterministicRandom = createDeterministicRandom()
deterministicRandom()
// => 0.9872818551957607
deterministicRandom()
// => 0.34880331158638
No, like they said it is not possible to seed Math.random()
but you can install external package which make provision for that. i used these package which can be install using these command
npm i random-seed
the example is gotten from the package documentation.
var seed = 'Hello World',
rand1 = require('random-seed').create(seed),
rand2 = require('random-seed').create(seed);
console.log(rand1(100), rand2(100));
follow the link for documentation https://www.npmjs.com/package/random-seed
SIN(id + seed) is a very interesting replacement for RANDOM functions that cannot be seeded like SQLite:
https://stackoverflow.com/a/75089040/7776828
Most of the answers here produce biased results. So here's a tested function based on seedrandom library from github:
!function(f,a,c){var s,l=256,p="random",d=c.pow(l,6),g=c.pow(2,52),y=2*g,h=l-1;function n(n,t,r){function e(){for(var n=u.g(6),t=d,r=0;n<g;)n=(n+r)*l,t*=l,r=u.g(1);for(;y<=n;)n/=2,t/=2,r>>>=1;return(n+r)/t}var o=[],i=j(function n(t,r){var e,o=[],i=typeof t;if(r&&"object"==i)for(e in t)try{o.push(n(t[e],r-1))}catch(n){}return o.length?o:"string"==i?t:t+"\0"}((t=1==t?{entropy:!0}:t||{}).entropy?[n,S(a)]:null==n?function(){try{var n;return s&&(n=s.randomBytes)?n=n(l):(n=new Uint8Array(l),(f.crypto||f.msCrypto).getRandomValues(n)),S(n)}catch(n){var t=f.navigator,r=t&&t.plugins;return[+new Date,f,r,f.screen,S(a)]}}():n,3),o),u=new m(o);return e.int32=function(){return 0|u.g(4)},e.quick=function(){return u.g(4)/4294967296},e.double=e,j(S(u.S),a),(t.pass||r||function(n,t,r,e){return e&&(e.S&&v(e,u),n.state=function(){return v(u,{})}),r?(c[p]=n,t):n})(e,i,"global"in t?t.global:this==c,t.state)}function m(n){var t,r=n.length,u=this,e=0,o=u.i=u.j=0,i=u.S=[];for(r||(n=[r++]);e<l;)i[e]=e++;for(e=0;e<l;e++)i[e]=i[o=h&o+n[e%r]+(t=i[e])],i[o]=t;(u.g=function(n){for(var t,r=0,e=u.i,o=u.j,i=u.S;n--;)t=i[e=h&e+1],r=r*l+i[h&(i[e]=i[o=h&o+t])+(i[o]=t)];return u.i=e,u.j=o,r})(l)}function v(n,t){return t.i=n.i,t.j=n.j,t.S=n.S.slice(),t}function j(n,t){for(var r,e=n+"",o=0;o<e.length;)t[h&o]=h&(r^=19*t[h&o])+e.charCodeAt(o++);return S(t)}function S(n){return String.fromCharCode.apply(0,n)}if(j(c.random(),a),"object"==typeof module&&module.exports){module.exports=n;try{s=require("crypto")}catch(n){}}else"function"==typeof define&&define.amd?define(function(){return n}):c["seed"+p]=n}("undefined"!=typeof self?self:this,[],Math);
function randIntWithSeed(seed, max=1) {
/* returns a random number between [0,max] including zero and max
seed can be either string or integer */
return Math.round(new Math.seedrandom('seed' + seed)()) * max
}
test for true randomness of this code: https://es6console.com/kkjkgur2/
There are plenty of good answers here but I had a similar issue with the additional requirement that I would like portability between Java's random number generator and whatever I ended up using in JavaScript.
I found the java-random package
These two pieces of code had identical output assuming the seed is the same:
Java:
Random randomGenerator = new Random(seed);
int randomInt;
for (int i=0; i<10; i++) {
randomInt = randomGenerator.nextInt(50);
System.out.println(randomInt);
}
JavaScript:
let Random = require('java-random');
let rng = new Random(seed);
for (let i=0; i<10; i++) {
let val = rng.nextInt(50);
console.log(val);
}
Do what bryc suggests ... but before you use his cyrb128 hash function to initialise, note that the return statement throws away 32 bits of entropy. Exclusive-or the four values together = 0. You should probably make the first element (h2^h3^h4) >>> 0.
I have written a function that returns a seeded random number, it uses Math.sin to have a long random number and uses the seed to pick numbers from that.
Use :
seedRandom("k9]:2#", 15)
it will return your seeded number
the first parameter is any string value ; your seed.
the second parameter is how many digits will return.
function seedRandom(inputSeed, lengthOfNumber){
var output = "";
var seed = inputSeed.toString();
var newSeed = 0;
var characterArray = ['0','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f','g','h','i','j','k','l','m','n','o','p','q','r','s','t','u','v','w','y','x','z','A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','U','R','S','T','U','V','W','X','Y','Z','!','#','#','$','%','^','&','*','(',')',' ','[','{',']','}','|',';',':',"'",',','<','.','>','/','?','`','~','-','_','=','+'];
var longNum = "";
var counter = 0;
var accumulator = 0;
for(var i = 0; i < seed.length; i++){
var a = seed.length - (i+1);
for(var x = 0; x < characterArray.length; x++){
var tempX = x.toString();
var lastDigit = tempX.charAt(tempX.length-1);
var xOutput = parseInt(lastDigit);
addToSeed(characterArray[x], xOutput, a, i);
}
}
function addToSeed(character, value, a, i){
if(seed.charAt(i) === character){newSeed = newSeed + value * Math.pow(10, a)}
}
newSeed = newSeed.toString();
var copy = newSeed;
for(var i=0; i<lengthOfNumber*9; i++){
newSeed = newSeed + copy;
var x = Math.sin(20982+(i)) * 10000;
var y = Math.floor((x - Math.floor(x))*10);
longNum = longNum + y.toString()
}
for(var i=0; i<lengthOfNumber; i++){
output = output + longNum.charAt(accumulator);
counter++;
accumulator = accumulator + parseInt(newSeed.charAt(counter));
}
return(output)
}
A simple approach for a fixed seed:
function fixedrandom(p){
const seed = 43758.5453123;
return (Math.abs(Math.sin(p)) * seed)%1;
}
In PHP, there is function srand(seed) which generate fixed random value for particular seed.
But, in JS, there is no such inbuilt function.
However, we can write simple and short function.
Step 1: Choose some Seed (Fix Number).
var seed = 100;
Number should be Positive Integer and greater than 1, further explanation in Step 2.
Step 2: Perform Math.sin() function on Seed, it will give sin value of that number. Store this value in variable x.
var x;
x = Math.sin(seed); // Will Return Fractional Value between -1 & 1 (ex. 0.4059..)
sin() method returns a Fractional value between -1 and 1.And we don't need Negative value, therefore, in first step choose number greater than 1.
Step 3: Returned Value is a Fractional value between -1 and 1. So mulitply this value with 10 for making it more than 1.
x = x * 10; // 10 for Single Digit Number
Step 4: Multiply the value with 10 for additional digits
x = x * 10; // Will Give value between 10 and 99 OR
x = x * 100; // Will Give value between 100 and 999
Multiply as per requirement of digits.
The result will be in decimal.
Step 5: Remove value after Decimal Point by Math's Round (Math.round()) Method.
x = Math.round(x); // This will give Integer Value.
Step 6: Turn Negative Values into Positive (if any) by Math.abs method
x = Math.abs(x); // Convert Negative Values into Positive(if any)
Explanation End.Final Code
var seed = 111; // Any Number greater than 1
var digit = 10 // 1 => single digit, 10 => 2 Digits, 100 => 3 Digits and so. (Multiple of 10)
var x; // Initialize the Value to store the result
x = Math.sin(seed); // Perform Mathematical Sin Method on Seed.
x = x * 10; // Convert that number into integer
x = x * digit; // Number of Digits to be included
x = Math.round(x); // Remove Decimals
x = Math.abs(x); // Convert Negative Number into Positive
Clean and Optimized Functional Code
function random_seed(seed, digit = 1) {
var x = Math.abs(Math.round(Math.sin(seed++) * 10 * digit));
return x;
}
Then Call this function using
random_seed(any_number, number_of_digits)any_number is must and should be greater than 1.number_of_digits is optional parameter and if nothing passed, 1 Digit will return.
random_seed(555); // 1 Digit
random_seed(234, 1); // 1 Digit
random_seed(7895656, 1000); // 4 Digit
For a number between 0 and 100.
Number.parseInt(Math.floor(Math.random() * 100))