I can't execute the 'GET' request with the getTasks() function.
$(document).ready(function(){
getTasks();
});
const apiKey = 'xxxxxxx';
function getTasks(){
$.ajax({
type: 'GET',
url: 'https://api.mlab.com/api/1/databases/taskmanager/collections/tasks?apiKey='+apiKey,
contentType: 'application/json',
xhrFields: {
withCredentials: true
},
success: function(data){
console.log(data);
},
error: function(){
console.log('FAIL')
}
})
}
The error that I get is:
api.mlab.com/api/1/databases/taskmanager/collections/tasks?apiKey=xxxxxxx
Failed to load resource: the server responded with a status of 400
(Bad Request)
Response to preflight request doesn't pass access control check: No
'Access-Control-Allow-Origin' header is present on the requested
resource. Origin 'null' is therefore not allowed access. The response
had HTTP status code 400.
I understand that Google-Chrome on Windows is CORS enabled, and will not (by default) allow communication with a different domain. I'm not sure what a preflight request is. Regardless, I tried to implement what I saw from Using CORS - HTML5 Rocks (from the CORS from jQuery section), but to no avail.
At a guess, the remote API simply does not respond to pre-flight requests for GET calls (because it shouldn't have to).
Your code is triggering a pre-flight request because it is non-simple. This is due to your adding a Content-type: application/json header. A request Content-type header is used to indicate the request payload format. As it is a GET, there is no payload.
Try this instead...
$.getJSON('https://api.mlab.com/api/1/databases/taskmanager/collections/tasks', {
apiKey: apiKey
}).done(function(data) {
console.log(data)
}).fail(function() {
console.log('FAIL')
})
CORS is there to protect you. If you want some more info on it, wikipedia has a good entry on it.
It appears the issue here is that you're trying to access your mongodb hosted by mlab directly from your web app. As you can see in your code, you're providing credentials/api keys to make that request.
My guess is that mlab's intent of not allowing CORS is to prevent you from doing this. You should never put your private API keys in html to be hosted on a web page, as it's easily accessible by reading source code. Then someone would have direct access to your mongodb.
Instead, you should create a server-side application (node, or... ** Whatever **) that exposes an api you control on the same domain (or a domain you give permission to via CORS).
As far as the "preflight" request, if you look in your chrome debugging tools, you should see an additional request go out with the "OPTIONS" method. This is the request that chrome (and most other http clients) send out first to a server hosted on a different domain. it's looking for the Access-Control-Allow-Origin header to find out whether it's allowed to make the request. Pretty interesting stuff if you ever have some time to dig into it.
Related
Before I start, I'd like to say sorry for my English, it's not my native language.
I'm trying to setup OAuth2 for GitHub authorization.
I stucked at the step, where I should send POST request to github and receive access token. The problem is that when I send POST request my browser automatically downloads file with access token. Since I can't open this file with javascript, I'm trying to get json as response.
In the documentation it's written that I can change accept header and receive json, but I can't write correct POST request.
I've already tried a lot of things, like this:
$.ajax({
method: "POST",
url: "https://github.com/login/oauth/access_token",
dataType: "application/json"
});
or
$.ajax({
url: 'https://github.com/login/oauth/access_token',
headers: {
Accept : "application/json",
}
data: "data",
success : function(response) {
console.log(response);
} })
etc
But I get this error:
XMLHttpRequest cannot load github.com/login/oauth/access_token. No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin 'http://braga.fedyunin.com.ua' is therefore not allowed access. The response had HTTP status code 404.
Can't find any useful information in google, so I had to register here. Thanks for help.
Read https://developer.github.com/v3/ in section: Cross Origin Resource Sharing
I tried the same thing, but also failed due to the lack of the Access-Control-Allow-Origin header in the response from GitHub API. I contacted GitHub support and found out what was going wrong.
It doesn't work because you are attempting to use OAuth from a web application, which GitHub API does not support. When you authenticate this way, your client_id and client_secret must be in the web page somewhere and sent with the POST request. The entire request, including your client_secret, can be viewed with Firebug or a similar tool. Because it's a bad idea to expose your client_secret, GitHub API will not return the Access-Control-Allow-Origin header, thus preventing you from retrieving the token.
You must issue the POST from the server side and get the token that way. When you do that, the client_secret is on your server, not in people's browsers.
The Ajax request from your site to github.com fails because browsers follow the same origin policy for xhr requests. This means that an xhr request can only be made for a resource on the same origin.
To allow for cross origin requests, the server needs to Whitlelist domains that can access a particular resource.
In your case, to do this, you need to register your site as an application on your github account, by entering the details here:https://github.com/settings/applications/new
I'm attempting to do a simple GET request from a server hosting some account data. The request requires an Authorization header in order to function correctly. I have performed the GET request and retrieved the data successfully in Postman, but attempting to do so in Javascript via Ajax results in a "Invalid HTTP status code 405" error.
Below is a link to a fiddle and a screenshot of the Postman settings. Thanks.!
$.ajax({
beforeSend: function(xhrObj){
xhrObj.setRequestHeader("Authorization","Bearer tj7LTLycpQC6DRup5BkHUO7uVbYaAZI40");
},
type: "GET",
url: "https://api05.iq.questrade.com/v1/accounts",
success: function(e){
console.log(e)
}
});
http://jsfiddle.net/Ldjbp2j8/1/
POSTMAN SETTINGS
From Chrome's JS console:
Failed to load resource: the server responded with a status of 405 (Method Not Allowed)
Because you are adding an Authorization header, you have made the request complex. This requires the browser to make a preflight OPTIONS request to ask for permission to send the complex request.
The server you are making the request to is responding saying that OPTIONS requests are not allowed to that URL.
You will need to modify the server so that it responds appropriately to the preflight CORS request.
Postman doesn't need to make a preflight request because your browser trusts Postman's code. It doesn't know if it can trust the code it received from JSFiddle (AKA potential evil hacker site) with the data api05.iq.questrade.com (AKA potential online banking or company Intranet site) is willing to share with it.
Look at the console errors:
XMLHttpRequest cannot load https://api05.iq.questrade.com/v1/accounts.
No 'Access-Control-Allow-Origin' header is present on the requested resource.
Origin 'http://fiddle.jshell.net' is therefore not allowed access. The response had HTTP status code 405.
This is the CORS issue. Browsers sent OPTIONS aka pre-flight request to the server if the domain doesn't match with the domain of the running code.
And you must add the required headers to the responses as well.
You must modify server to handle that.
You can also use JSONP as an alternative.
I'm building an app that has to get and set data at a remote web service through requests. When I use the jQuery GET request it works fine, I can request data from the service without any problems, but when I use PUT I get some erros:
OPTIONS http://myurl.com 501 (Unsupported method
('OPTIONS'))
OPTIONS http://myurl.com Origin null is not allowed by Access-Control-Allow-Origin.
I've tried almost anything to get this to work, but it won't work. I've download a chrome app called REST Console, which can make custom REST requests. The strange thing is that I can interact with my server over that app but not through my javascript!
This is the javascript:
$.ajax({
url: 'http://myurl.com',
type: 'PUT',
data: '<time>16:00</time>',
success: function(data) { alert(data); }
});
Could anybody tell me what is going on here?
First ensure you're serving the page that runs the script from a web server, not directly from the file system.
I'm guessing your service at http://myurl.com is at a different host name to the host name your page is being served from? For it to work in this case you need to implement HTTP headers to support Cross Origin Resource Sharing.
Your service at http://myurl.com needs to handle an HTTP OPTIONS request, the response to which should be a set of HTTP headers (with no content) as follows:
Access-Control-Allow-Origin: http://url-of-page-with-javascript/
Optionally you can also specify Access-Control-Allow-Credentials, Access-Control-Allow-Headers and Access-Control-Allow-Methods. See the full specification here.
You'll also need to add the same headers with the same values when your server responds to the PUT request - obviously the content will also be included with this response.
I'm developing a phonegap App with html5, css, js and jQuery Mobile and I need to connect to a webservice which is already done and fully working. The problem is the Access Control Allow Origin and the Cross Domain. As if it wasn't hard enough I have to think about the authentication too, essential to connect to the web service. I already done my research, read a lot of tuts, tried a lot of solutions, some of them using jsonP which looked to me the closest one to work. The thing is I'm new at this and no tutorial looked good, so hopefully someone here could lead me the way. The webService was build in asp.net and I have full access to it if it's needed. I'm using AJAX to make the "call" but I can't pass the ForeFront authentication .
Here's the JS+AJAX code:
function conteudoProg() {
var webMethod = "myURL";
var credentials = {
username : "myUser",
password : "myPass"
};
$.ajax({
type : "GET",
url : webMethod,
//data: credentials,
contentType : "application/json; charset=utf-8",
dataType : "jsonp",
success : function(msg) {
alert(msg);
},
error : function(e) {
alert(e.status + " " + e.statusText );
}
});
}
If I change my dataType from jsonp to json, I get this error:
OPTIONS https://myURL 440 (Login Timeout)
XMLHttpRequest cannot load https://myURL Origin http://127.0.0.1:8020 is not allowed by Access-Control-Allow-Origin.
With jsonp, the error looks like this:
Resource interpreted as Script but transferred with MIME type text/html: "https://myURL/CookieAuth.dll?GetLogon?curl=Z2FWSInqueritosZ2FServ…1820135927463_1359737732559Z26_Z3D1359737732605&reason=0&formdir=3". jquery-1.8.2.min.js:2
Uncaught SyntaxError: Unexpected token <
Requests to another domain will cause a pre-flight OPTIONS request to see whether the requesting domain can make calls to this domain.
The receiving end needs to emit the correct headers or your browser will block the request and give you the error you posted.
Say you are requesting from mydomain.com to webservice.com
Then webservice.com/api should emit these headers:
Access-Control-Allow-Origin: http[s]://mydomain.com
Access-Control-Allow-Credentials: true # if you want cookies
Access-Control-Allow-Headers: Content-Type, X-Custom-Header # any extra headers you want to send
Make sure the webservice knows about OPTIONS requests. It really only needs to emit some CORS headers, it doesn't need to do anything else (like process a request to it's API).
You don't need to change anything in your AJAX handler, it will pass as any other request. If you want cookies make sure to set http_request.withCredentials = true;
Keep in mind that an HTTPS URL is considered to be different from an HTTP domain and make sure your HTTPS certificate is valid, if it's not valid the request may fail silently. If you're using a self-signed certificate (for testing) add it to your browser or OS whitelist.
Cross domain request from HTTP to HTTPS aborts immediately
As for compatibility. Earlier versions of Internet Explorer (8 and lower) use ActiveXObject, this API is very bad at CORS. It doesn't support authentication/cookies or custom headers (such as Content-Type: application/JSON). I would recommend a JSONp fallback.
The code does not work because when you tell jQuery that the .ajax method expects a dataType json, that's what's trying to parse the response into. If the response is html then you should use a dataType html (or none, to let the default intelligent guess do it's work). See jQuery.ajax() dataType for more info.
I have two domains. I'm trying to access a JSON object from one domain through a page on another. I've read everything I could find regarding this issue, and still can't figure this out.
The domain serving the JSON has the following settings:
Header set Access-Control-Allow-Origin "*"
Header set Access-Control-Allow-Methods "GET, OPTIONS"
Header set Access-Control-Allow-Headers "origin, authorization, accept"
From my other domain, I'm calling the following:
$.ajax({
type:'get',
beforeSend: function(xhr) {
var auth = // authentication;
xhr.setRequestHeader("Authorization", "Basic " + auth);
}
url:myUrl,
dataType:'json',
error: function(xhr, textStatus, errorThrown) { console.log(textStatus, errorThrown); }
})
I know that 'auth' is initialized properly (logged and checked). However, this does not work. In Firefox's Console, I get
Request URL: ...
Request Method:
OPTIONS
Status Code:
HTTP/1.1 401 Authorization Required
If I get rid of the beforeSend:... part, I see the following
Request Method:
GET
Status Code:
HTTP/1.1 401 Authorization Required
However, the domain serving JSON also can serve JSONP. I don't want to use this, mainly because the application will be running constantly on a dedicated browser, and I'm worried about this issue. More importantly, I would really like to know what is actually wrong with what I am doing. I know that for practical purposes there are various ways to overcome the JSONP memory leak (such as not using jQuery).
At any rate, when I did use JSONP, my code looked like this:
$.ajax({
url:newUrl,
dataType:'jsonp',
jsonp:'jsonp'
}).done(function(d){console.log(d)})
This gets the following
Request Method:
GET
Status Code:
HTTP/1.1 200 OK
after it prompts me with an alert box for a username and password.
Is there a fundamental difference in the way jQuery handles JSONP requests as opposed to JSON requests? And if so, how can I fix this?
Thanks.
Edit: Here's what I did find.
Basically, because I need authentication, the GET request is sending an Authorization header. However, this is not a "simple" header, and so the browser is sending a pre-flight request (the OPTIONS). This preflight request doesn't have any authentication, though, and so the server was rejecting it. The "solution" was to set the server to let OPTIONS request not require authentication, and report an HTTP status of 200 to it.
Reference: http://www.kinvey.com/blog/item/61-kinvey-adds-cross-origin-resource-sharing-cors
mail-archive[.com]/c-user#axis.apache.org/msg00790.html (not allowed to post more links)
Unfortunately, the "solution" is only working on Firefox and not Chrome. Chrome simply shows the request in red, but doesn't give me any more info on why it failed.
Edit 2: Fixed on Chrome: The server I was trying to get data from had a security certificate which was not trusted. The preflight request on Chrome failed because of this. Solution
superuser[.com]/questions/27268/how-do-i-disable-the-warning-chrome-gives-if-a-security-certificate-is-not-trust (not allowed to post more links)
Welp, now that I have enough rep a while later, I might as well answer this question and accept it.
When you attempt to send a GET json request to a server with headers, the browser first sends an OPTION request to make sure that you can access it. Unfortunately, this OPTION request cannot carry with it any authentication. This means that if you want to send a GET with auth, the server must allow an OPTION without auth. Once I did this, things started working.
Some examples available here may illustrate further how access control can be combined with CORS. Specifically the credentialed GET example. Access control requires that the request set the withCredentials flag to true on the XMLHttpRequest, and for the server handling the OPTIONS method to do two things:
Set Access-Control-Allow-Credentials: true
Not use a wildcard * in the Access-Control-Allow-Origin header. This has to be set to the origin exactly according to the MDN docs on HTTP access control (CORS).
Essentially, the thing processing the OPTIONS request needs to send back appropriate response headers so you can make that credentialed request.
In your question you stated that the service you are interacting with is returning Access-Control-Allow-Origin: *, which is not compatible with a credentialed cross-domain request. This needs to return the origin specifically.
The aforementioned MDN Http Access Control (CORS) documentation also links to the Server-Side Access Control documentation outlining how a server would potentially respond to various cross domain requests - including handling a cross domain credentialed POST request that requires you to send back the correct headers in response to the OPTIONS method. You can find that example here.
Why don't you try typing the URL you are fetching the JSON from into your browser and seeing what happens. It sounds like you literally just need to authenticate into this other website to access it.
If your site needs to work in other browsers like IE, you WILL need JSONP, by the way. The security won't allow the cross site request to work. The headers won't change that. I believe you will also need to add a security policy in your headers.