Related
I am using the function below to match URLs inside a given text and replace them for HTML links. The regular expression is working great, but currently I am only replacing the first match.
How I can replace all the URL? I guess I should be using the exec command, but I did not really figure how to do it.
function replaceURLWithHTMLLinks(text) {
var exp = /(\b(https?|ftp|file):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/i;
return text.replace(exp,"<a href='$1'>$1</a>");
}
First off, rolling your own regexp to parse URLs is a terrible idea. You must imagine this is a common enough problem that someone has written, debugged and tested a library for it, according to the RFCs. URIs are complex - check out the code for URL parsing in Node.js and the Wikipedia page on URI schemes.
There are a ton of edge cases when it comes to parsing URLs: international domain names, actual (.museum) vs. nonexistent (.etc) TLDs, weird punctuation including parentheses, punctuation at the end of the URL, IPV6 hostnames etc.
I've looked at a ton of libraries, and there are a few worth using despite some downsides:
Soapbox's linkify has seen some serious effort put into it, and a major refactor in June 2015 removed the jQuery dependency. It still has issues with IDNs.
AnchorMe is a newcomer that claims to be faster and leaner. Some IDN issues as well.
Autolinker.js lists features very specifically (e.g. "Will properly handle HTML input. The utility will not change the href attribute inside anchor () tags"). I'll thrown some tests at it when a demo becomes available.
Libraries that I've disqualified quickly for this task:
Django's urlize didn't handle certain TLDs properly (here is the official list of valid TLDs. No demo.
autolink-js wouldn't detect "www.google.com" without http://, so it's not quite suitable for autolinking "casual URLs" (without a scheme/protocol) found in plain text.
Ben Alman's linkify hasn't been maintained since 2009.
If you insist on a regular expression, the most comprehensive is the URL regexp from Component, though it will falsely detect some non-existent two-letter TLDs by looking at it.
Replacing URLs with links (Answer to the General Problem)
The regular expression in the question misses a lot of edge cases. When detecting URLs, it's always better to use a specialized library that handles international domain names, new TLDs like .museum, parentheses and other punctuation within and at the end of the URL, and many other edge cases. See the Jeff Atwood's blog post The Problem With URLs for an explanation of some of the other issues.
The best summary of URL matching libraries is in Dan Dascalescu's Answer
(as of Feb 2014)
"Make a regular expression replace more than one match" (Answer to the specific problem)
Add a "g" to the end of the regular expression to enable global matching:
/ig;
But that only fixes the problem in the question where the regular expression was only replacing the first match. Do not use that code.
I've made some small modifications to Travis's code (just to avoid any unnecessary redeclaration - but it's working great for my needs, so nice job!):
function linkify(inputText) {
var replacedText, replacePattern1, replacePattern2, replacePattern3;
//URLs starting with http://, https://, or ftp://
replacePattern1 = /(\b(https?|ftp):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/gim;
replacedText = inputText.replace(replacePattern1, '$1');
//URLs starting with "www." (without // before it, or it'd re-link the ones done above).
replacePattern2 = /(^|[^\/])(www\.[\S]+(\b|$))/gim;
replacedText = replacedText.replace(replacePattern2, '$1$2');
//Change email addresses to mailto:: links.
replacePattern3 = /(([a-zA-Z0-9\-\_\.])+#[a-zA-Z\_]+?(\.[a-zA-Z]{2,6})+)/gim;
replacedText = replacedText.replace(replacePattern3, '$1');
return replacedText;
}
Made some optimizations to Travis' Linkify() code above. I also fixed a bug where email addresses with subdomain type formats would not be matched (i.e. example#domain.co.uk).
In addition, I changed the implementation to prototype the String class so that items can be matched like so:
var text = 'address#example.com';
text.linkify();
'http://stackoverflow.com/'.linkify();
Anyway, here's the script:
if(!String.linkify) {
String.prototype.linkify = function() {
// http://, https://, ftp://
var urlPattern = /\b(?:https?|ftp):\/\/[a-z0-9-+&##\/%?=~_|!:,.;]*[a-z0-9-+&##\/%=~_|]/gim;
// www. sans http:// or https://
var pseudoUrlPattern = /(^|[^\/])(www\.[\S]+(\b|$))/gim;
// Email addresses
var emailAddressPattern = /[\w.]+#[a-zA-Z_-]+?(?:\.[a-zA-Z]{2,6})+/gim;
return this
.replace(urlPattern, '$&')
.replace(pseudoUrlPattern, '$1$2')
.replace(emailAddressPattern, '$&');
};
}
Thanks, this was very helpful. I also wanted something that would link things that looked like a URL -- as a basic requirement, it'd link something like www.yahoo.com, even if the http:// protocol prefix was not present. So basically, if "www." is present, it'll link it and assume it's http://. I also wanted emails to turn into mailto: links. EXAMPLE: www.yahoo.com would be converted to www.yahoo.com
Here's the code I ended up with (combination of code from this page and other stuff I found online, and other stuff I did on my own):
function Linkify(inputText) {
//URLs starting with http://, https://, or ftp://
var replacePattern1 = /(\b(https?|ftp):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/gim;
var replacedText = inputText.replace(replacePattern1, '$1');
//URLs starting with www. (without // before it, or it'd re-link the ones done above)
var replacePattern2 = /(^|[^\/])(www\.[\S]+(\b|$))/gim;
var replacedText = replacedText.replace(replacePattern2, '$1$2');
//Change email addresses to mailto:: links
var replacePattern3 = /(\w+#[a-zA-Z_]+?\.[a-zA-Z]{2,6})/gim;
var replacedText = replacedText.replace(replacePattern3, '$1');
return replacedText
}
In the 2nd replace, the (^|[^/]) part is only replacing www.whatever.com if it's not already prefixed by // -- to avoid double-linking if a URL was already linked in the first replace. Also, it's possible that www.whatever.com might be at the beginning of the string, which is the first "or" condition in that part of the regex.
This could be integrated as a jQuery plugin as Jesse P illustrated above -- but I specifically wanted a regular function that wasn't acting on an existing DOM element, because I'm taking text I have and then adding it to the DOM, and I want the text to be "linkified" before I add it, so I pass the text through this function. Works great.
Identifying URLs is tricky because they are often surrounded by punctuation marks and because users frequently do not use the full form of the URL. Many JavaScript functions exist for replacing URLs with hyperlinks, but I was unable to find one that works as well as the urlize filter in the Python-based web framework Django. I therefore ported Django's urlize function to JavaScript:
https://github.com/ljosa/urlize.js
An example:
urlize('Go to SO (stackoverflow.com) and ask. <grin>',
{nofollow: true, autoescape: true})
=> "Go to SO (stackoverflow.com) and ask. <grin>"
The second argument, if true, causes rel="nofollow" to be inserted. The third argument, if true, escapes characters that have special meaning in HTML. See the README file.
I searched on google for anything newer and ran across this one:
$('p').each(function(){
$(this).html( $(this).html().replace(/((http|https|ftp):\/\/[\w?=&.\/-;#~%-]+(?![\w\s?&.\/;#~%"=-]*>))/g, '$1 ') );
});
demo: http://jsfiddle.net/kachibito/hEgvc/1/
Works really well for normal links.
I made a change to Roshambo String.linkify() to the emailAddressPattern to recognize aaa.bbb.#ccc.ddd addresses
if(!String.linkify) {
String.prototype.linkify = function() {
// http://, https://, ftp://
var urlPattern = /\b(?:https?|ftp):\/\/[a-z0-9-+&##\/%?=~_|!:,.;]*[a-z0-9-+&##\/%=~_|]/gim;
// www. sans http:// or https://
var pseudoUrlPattern = /(^|[^\/])(www\.[\S]+(\b|$))/gim;
// Email addresses *** here I've changed the expression ***
var emailAddressPattern = /(([a-zA-Z0-9_\-\.]+)#[a-zA-Z_]+?(?:\.[a-zA-Z]{2,6}))+/gim;
return this
.replace(urlPattern, '<a target="_blank" href="$&">$&</a>')
.replace(pseudoUrlPattern, '$1<a target="_blank" href="http://$2">$2</a>')
.replace(emailAddressPattern, '<a target="_blank" href="mailto:$1">$1</a>');
};
}
/**
* Convert URLs in a string to anchor buttons
* #param {!string} string
* #returns {!string}
*/
function URLify(string){
var urls = string.match(/(((ftp|https?):\/\/)[\-\w#:%_\+.~#?,&\/\/=]+)/g);
if (urls) {
urls.forEach(function (url) {
string = string.replace(url, '<a target="_blank" href="' + url + '">' + url + "</a>");
});
}
return string.replace("(", "<br/>(");
}
simple example
The best script to do this:
http://benalman.com/projects/javascript-linkify-process-lin/
This solution works like many of the others, and in fact uses the same regex as one of them, however in stead of returning a HTML String this will return a document fragment containing the A element and any applicable text nodes.
function make_link(string) {
var words = string.split(' '),
ret = document.createDocumentFragment();
for (var i = 0, l = words.length; i < l; i++) {
if (words[i].match(/[-a-zA-Z0-9#:%_\+.~#?&//=]{2,256}\.[a-z]{2,4}\b(\/[-a-zA-Z0-9#:%_\+.~#?&//=]*)?/gi)) {
var elm = document.createElement('a');
elm.href = words[i];
elm.textContent = words[i];
if (ret.childNodes.length > 0) {
ret.lastChild.textContent += ' ';
}
ret.appendChild(elm);
} else {
if (ret.lastChild && ret.lastChild.nodeType === 3) {
ret.lastChild.textContent += ' ' + words[i];
} else {
ret.appendChild(document.createTextNode(' ' + words[i]));
}
}
}
return ret;
}
There are some caveats, namely with older IE and textContent support.
here is a demo.
If you need to show shorter link (only domain), but with same long URL, you can try my modification of Sam Hasler's code version posted above
function replaceURLWithHTMLLinks(text) {
var exp = /(\b(https?|ftp|file):\/\/([-A-Z0-9+&##%?=~_|!:,.;]*)([-A-Z0-9+&##%?\/=~_|!:,.;]*)[-A-Z0-9+&##\/%=~_|])/ig;
return text.replace(exp, "<a href='$1' target='_blank'>$3</a>");
}
Reg Ex:
/(\b((https?|ftp|file):\/\/|(www))[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|]*)/ig
function UriphiMe(text) {
var exp = /(\b((https?|ftp|file):\/\/|(www))[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|]*)/ig;
return text.replace(exp,"<a href='$1'>$1</a>");
}
Below are some tested string:
Find me on to www.google.com
www
Find me on to www.http://www.com
Follow me on : http://www.nishantwork.wordpress.com
http://www.nishantwork.wordpress.com
Follow me on : http://www.nishantwork.wordpress.com
https://stackoverflow.com/users/430803/nishant
Note: If you don't want to pass www as valid one just use below reg ex:
/(\b((https?|ftp|file):\/\/|(www))[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/ig
The warnings about URI complexity should be noted, but the simple answer to your question is:
To replace every match you need to add the /g flag to the end of the RegEx:
/(\b(https?|ftp|file):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/gi
Try the below function :
function anchorify(text){
var exp = /(\b(https?|ftp|file):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/ig;
var text1=text.replace(exp, "<a href='$1'>$1</a>");
var exp2 =/(^|[^\/])(www\.[\S]+(\b|$))/gim;
return text1.replace(exp2, '$1<a target="_blank" href="http://$2">$2</a>');
}
alert(anchorify("Hola amigo! https://www.sharda.ac.in/academics/"));
Keep it simple! Say what you cannot have, rather than what you can have :)
As mentioned above, URLs can be quite complex, especially after the '?', and not all of them start with a 'www.' e.g. maps.bing.com/something?key=!"£$%^*()&lat=65&lon&lon=20
So, rather than have a complex regex that wont meet all edge cases, and will be hard to maintain, how about this much simpler one, which works well for me in practise.
Match
http(s):// (anything but a space)+
www. (anything but a space)+
Where 'anything' is [^'"<>\s]
... basically a greedy match, carrying on to you meet a space, quote, angle bracket, or end of line
Also:
Remember to check that it is not already in URL format, e.g. the text contains href="..." or src="..."
Add ref=nofollow (if appropriate)
This solution isn't as "good" as the libraries mentioned above, but is much simpler, and works well in practise.
if html.match( /(href)|(src)/i )) {
return html; // text already has a hyper link in it
}
html = html.replace(
/\b(https?:\/\/[^\s\(\)\'\"\<\>]+)/ig,
"<a ref='nofollow' href='$1'>$1</a>"
);
html = html.replace(
/\s(www\.[^\s\(\)\'\"\<\>]+)/ig,
"<a ref='nofollow' href='http://$1'>$1</a>"
);
html = html.replace(
/^(www\.[^\s\(\)\'\"\<\>]+)/ig,
"<a ref='nofollow' href='http://$1'>$1</a>"
);
return html;
Correct URL detection with international domains & astral characters support is not trivial thing. linkify-it library builds regex from many conditions, and final size is about 6 kilobytes :) . It's more accurate than all libs, currently referenced in accepted answer.
See linkify-it demo to check live all edge cases and test your ones.
If you need to linkify HTML source, you should parse it first, and iterate each text token separately.
I've wrote yet another JavaScript library, it might be better for you since it's very sensitive with the least possible false positives, fast and small in size. I'm currently actively maintaining it so please do test it in the demo page and see how it would work for you.
link: https://github.com/alexcorvi/anchorme.js
I had to do the opposite, and make html links into just the URL, but I modified your regex and it works like a charm, thanks :)
var exp = /<a\s.*href=['"](\b(https?|ftp|file):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])['"].*>.*<\/a>/ig;
source = source.replace(exp,"$1");
The e-mail detection in Travitron's answer above did not work for me, so I extended/replaced it with the following (C# code).
// Change e-mail addresses to mailto: links.
const RegexOptions o = RegexOptions.Multiline | RegexOptions.IgnoreCase;
const string pat3 = #"([a-zA-Z0-9_\-\.]+)#([a-zA-Z0-9_\-\.]+)\.([a-zA-Z]{2,6})";
const string rep3 = #"$1#$2.$3";
text = Regex.Replace(text, pat3, rep3, o);
This allows for e-mail addresses like "firstname.secondname#one.two.three.co.uk".
After input from several sources I've now a solution that works well. It had to do with writing your own replacement code.
Answer.
Fiddle.
function replaceURLWithHTMLLinks(text) {
var re = /(\(.*?)?\b((?:https?|ftp|file):\/\/[-a-z0-9+&##\/%?=~_()|!:,.;]*[-a-z0-9+&##\/%=~_()|])/ig;
return text.replace(re, function(match, lParens, url) {
var rParens = '';
lParens = lParens || '';
// Try to strip the same number of right parens from url
// as there are left parens. Here, lParenCounter must be
// a RegExp object. You cannot use a literal
// while (/\(/g.exec(lParens)) { ... }
// because an object is needed to store the lastIndex state.
var lParenCounter = /\(/g;
while (lParenCounter.exec(lParens)) {
var m;
// We want m[1] to be greedy, unless a period precedes the
// right parenthesis. These tests cannot be simplified as
// /(.*)(\.?\).*)/.exec(url)
// because if (.*) is greedy then \.? never gets a chance.
if (m = /(.*)(\.\).*)/.exec(url) ||
/(.*)(\).*)/.exec(url)) {
url = m[1];
rParens = m[2] + rParens;
}
}
return lParens + "<a href='" + url + "'>" + url + "</a>" + rParens;
});
}
Here's my solution:
var content = "Visit https://wwww.google.com or watch this video: https://www.youtube.com/watch?v=0T4DQYgsazo and news at http://www.bbc.com";
content = replaceUrlsWithLinks(content, "http://");
content = replaceUrlsWithLinks(content, "https://");
function replaceUrlsWithLinks(content, protocol) {
var startPos = 0;
var s = 0;
while (s < content.length) {
startPos = content.indexOf(protocol, s);
if (startPos < 0)
return content;
let endPos = content.indexOf(" ", startPos + 1);
if (endPos < 0)
endPos = content.length;
let url = content.substr(startPos, endPos - startPos);
if (url.endsWith(".") || url.endsWith("?") || url.endsWith(",")) {
url = url.substr(0, url.length - 1);
endPos--;
}
if (ROOTNS.utils.stringsHelper.validUrl(url)) {
let link = "<a href='" + url + "'>" + url + "</a>";
content = content.substr(0, startPos) + link + content.substr(endPos);
s = startPos + link.length;
} else {
s = endPos + 1;
}
}
return content;
}
function validUrl(url) {
try {
new URL(url);
return true;
} catch (e) {
return false;
}
}
Try Below Solution
function replaceLinkClickableLink(url = '') {
let pattern = new RegExp('^(https?:\\/\\/)?'+
'((([a-z\\d]([a-z\\d-]*[a-z\\d])*)\\.?)+[a-z]{2,}|'+
'((\\d{1,3}\\.){3}\\d{1,3}))'+
'(\\:\\d+)?(\\/[-a-z\\d%_.~+]*)*'+
'(\\?[;&a-z\\d%_.~+=-]*)?'+
'(\\#[-a-z\\d_]*)?$','i');
let isUrl = pattern.test(url);
if (isUrl) {
return `${url}`;
}
return url;
}
Replace URLs in text with HTML links, ignore the URLs within a href/pre tag.
https://github.com/JimLiu/auto-link
worked for me :
var urlRegex =/(\b((https?|ftp|file):\/\/)?((([a-z\d]([a-z\d-]*[a-z\d])*)\.)+[a-z]{2,}|((\d{1,3}\.){3}\d{1,3}))(\:\d+)?(\/[-a-z\d%_.~+]*)*(\?[;&a-z\d%_.~+=-]*)?(\#[-a-z\d_]*)?)/ig;
return text.replace(urlRegex, function(url) {
var newUrl = url.indexOf("http") === -1 ? "http://" + url : url;
return '' + url + '';
});
i have a string,
mystr = 'public\uploads\file-1490095922739.jpg';
i want to replace
public\uploads
with " ", so that i just want to extract only file name ie
file-1490095922739.jpg
or like,
\uploads\file-1490095922739.jpg
how can i do this, is there any methods for this in js or can we do it by replace method.
i am performing the following steps,
var imagepath1;
var imagepath = 'public\uploads\file-1490095922739.jpg';
unwantedChar = 'public|uploads';
regExp = new RegExp(unwantedChar , 'gi');
imagepath = imagepath.replace(regExp , '');
imagepath1 = imagepath;
$scope.model.imagepath = imagepath1.replace(/\\/g, "");
please suggest me optimized method.
var input = "public\\uploads\\file-1490095922739.jpg";
var result = input.replace("public\\uploads\\", "");
This is what you're looking for, no need for fancy regexs :). More information about replace can be found here.
Maybe I don't understand the issue - but wouldn't this work?
var mystr = 'public\uploads\file-1490095922739.jpg';
var filename = mystr.replace('public\uploads', '');
If you want to get the part of the string after the last backslash character, you can use this:
var filename = mystr.substr(mystr.lastIndexOf('\\') + 1);
Also note that you need to escape the backslash characters in your test string:
var mystr = 'public\\uploads\\file-1490095922739.jpg';
What about just doing:
var imagepath = 'public\\uploads\\file-1490095922739.jpg';
$scope.model.imagepath = imagepath.replace('public\\uploads\\', '');
instead of using a bunch of unnecessary variables?
This way you're getting the file path, removing public\uploads\ and then setting the file path to $scope.model.imagepath
Note that this will only work if the image file path always matches 'public\uploads\*FILENAME*'.
var url = '/anysource/anypath/myfilename.gif';
var filename = url.slice(url.lastIndexOf('/')+1,url.length);
Search for the last forward slash, and slice the string (+1 because you don't want the slash), with the length of the string to get the filename. This way, you don't have to worry about the path is at all times.
I am using the function below to match URLs inside a given text and replace them for HTML links. The regular expression is working great, but currently I am only replacing the first match.
How I can replace all the URL? I guess I should be using the exec command, but I did not really figure how to do it.
function replaceURLWithHTMLLinks(text) {
var exp = /(\b(https?|ftp|file):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/i;
return text.replace(exp,"<a href='$1'>$1</a>");
}
First off, rolling your own regexp to parse URLs is a terrible idea. You must imagine this is a common enough problem that someone has written, debugged and tested a library for it, according to the RFCs. URIs are complex - check out the code for URL parsing in Node.js and the Wikipedia page on URI schemes.
There are a ton of edge cases when it comes to parsing URLs: international domain names, actual (.museum) vs. nonexistent (.etc) TLDs, weird punctuation including parentheses, punctuation at the end of the URL, IPV6 hostnames etc.
I've looked at a ton of libraries, and there are a few worth using despite some downsides:
Soapbox's linkify has seen some serious effort put into it, and a major refactor in June 2015 removed the jQuery dependency. It still has issues with IDNs.
AnchorMe is a newcomer that claims to be faster and leaner. Some IDN issues as well.
Autolinker.js lists features very specifically (e.g. "Will properly handle HTML input. The utility will not change the href attribute inside anchor () tags"). I'll thrown some tests at it when a demo becomes available.
Libraries that I've disqualified quickly for this task:
Django's urlize didn't handle certain TLDs properly (here is the official list of valid TLDs. No demo.
autolink-js wouldn't detect "www.google.com" without http://, so it's not quite suitable for autolinking "casual URLs" (without a scheme/protocol) found in plain text.
Ben Alman's linkify hasn't been maintained since 2009.
If you insist on a regular expression, the most comprehensive is the URL regexp from Component, though it will falsely detect some non-existent two-letter TLDs by looking at it.
Replacing URLs with links (Answer to the General Problem)
The regular expression in the question misses a lot of edge cases. When detecting URLs, it's always better to use a specialized library that handles international domain names, new TLDs like .museum, parentheses and other punctuation within and at the end of the URL, and many other edge cases. See the Jeff Atwood's blog post The Problem With URLs for an explanation of some of the other issues.
The best summary of URL matching libraries is in Dan Dascalescu's Answer
(as of Feb 2014)
"Make a regular expression replace more than one match" (Answer to the specific problem)
Add a "g" to the end of the regular expression to enable global matching:
/ig;
But that only fixes the problem in the question where the regular expression was only replacing the first match. Do not use that code.
I've made some small modifications to Travis's code (just to avoid any unnecessary redeclaration - but it's working great for my needs, so nice job!):
function linkify(inputText) {
var replacedText, replacePattern1, replacePattern2, replacePattern3;
//URLs starting with http://, https://, or ftp://
replacePattern1 = /(\b(https?|ftp):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/gim;
replacedText = inputText.replace(replacePattern1, '$1');
//URLs starting with "www." (without // before it, or it'd re-link the ones done above).
replacePattern2 = /(^|[^\/])(www\.[\S]+(\b|$))/gim;
replacedText = replacedText.replace(replacePattern2, '$1$2');
//Change email addresses to mailto:: links.
replacePattern3 = /(([a-zA-Z0-9\-\_\.])+#[a-zA-Z\_]+?(\.[a-zA-Z]{2,6})+)/gim;
replacedText = replacedText.replace(replacePattern3, '$1');
return replacedText;
}
Made some optimizations to Travis' Linkify() code above. I also fixed a bug where email addresses with subdomain type formats would not be matched (i.e. example#domain.co.uk).
In addition, I changed the implementation to prototype the String class so that items can be matched like so:
var text = 'address#example.com';
text.linkify();
'http://stackoverflow.com/'.linkify();
Anyway, here's the script:
if(!String.linkify) {
String.prototype.linkify = function() {
// http://, https://, ftp://
var urlPattern = /\b(?:https?|ftp):\/\/[a-z0-9-+&##\/%?=~_|!:,.;]*[a-z0-9-+&##\/%=~_|]/gim;
// www. sans http:// or https://
var pseudoUrlPattern = /(^|[^\/])(www\.[\S]+(\b|$))/gim;
// Email addresses
var emailAddressPattern = /[\w.]+#[a-zA-Z_-]+?(?:\.[a-zA-Z]{2,6})+/gim;
return this
.replace(urlPattern, '$&')
.replace(pseudoUrlPattern, '$1$2')
.replace(emailAddressPattern, '$&');
};
}
Thanks, this was very helpful. I also wanted something that would link things that looked like a URL -- as a basic requirement, it'd link something like www.yahoo.com, even if the http:// protocol prefix was not present. So basically, if "www." is present, it'll link it and assume it's http://. I also wanted emails to turn into mailto: links. EXAMPLE: www.yahoo.com would be converted to www.yahoo.com
Here's the code I ended up with (combination of code from this page and other stuff I found online, and other stuff I did on my own):
function Linkify(inputText) {
//URLs starting with http://, https://, or ftp://
var replacePattern1 = /(\b(https?|ftp):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/gim;
var replacedText = inputText.replace(replacePattern1, '$1');
//URLs starting with www. (without // before it, or it'd re-link the ones done above)
var replacePattern2 = /(^|[^\/])(www\.[\S]+(\b|$))/gim;
var replacedText = replacedText.replace(replacePattern2, '$1$2');
//Change email addresses to mailto:: links
var replacePattern3 = /(\w+#[a-zA-Z_]+?\.[a-zA-Z]{2,6})/gim;
var replacedText = replacedText.replace(replacePattern3, '$1');
return replacedText
}
In the 2nd replace, the (^|[^/]) part is only replacing www.whatever.com if it's not already prefixed by // -- to avoid double-linking if a URL was already linked in the first replace. Also, it's possible that www.whatever.com might be at the beginning of the string, which is the first "or" condition in that part of the regex.
This could be integrated as a jQuery plugin as Jesse P illustrated above -- but I specifically wanted a regular function that wasn't acting on an existing DOM element, because I'm taking text I have and then adding it to the DOM, and I want the text to be "linkified" before I add it, so I pass the text through this function. Works great.
Identifying URLs is tricky because they are often surrounded by punctuation marks and because users frequently do not use the full form of the URL. Many JavaScript functions exist for replacing URLs with hyperlinks, but I was unable to find one that works as well as the urlize filter in the Python-based web framework Django. I therefore ported Django's urlize function to JavaScript:
https://github.com/ljosa/urlize.js
An example:
urlize('Go to SO (stackoverflow.com) and ask. <grin>',
{nofollow: true, autoescape: true})
=> "Go to SO (stackoverflow.com) and ask. <grin>"
The second argument, if true, causes rel="nofollow" to be inserted. The third argument, if true, escapes characters that have special meaning in HTML. See the README file.
I searched on google for anything newer and ran across this one:
$('p').each(function(){
$(this).html( $(this).html().replace(/((http|https|ftp):\/\/[\w?=&.\/-;#~%-]+(?![\w\s?&.\/;#~%"=-]*>))/g, '$1 ') );
});
demo: http://jsfiddle.net/kachibito/hEgvc/1/
Works really well for normal links.
I made a change to Roshambo String.linkify() to the emailAddressPattern to recognize aaa.bbb.#ccc.ddd addresses
if(!String.linkify) {
String.prototype.linkify = function() {
// http://, https://, ftp://
var urlPattern = /\b(?:https?|ftp):\/\/[a-z0-9-+&##\/%?=~_|!:,.;]*[a-z0-9-+&##\/%=~_|]/gim;
// www. sans http:// or https://
var pseudoUrlPattern = /(^|[^\/])(www\.[\S]+(\b|$))/gim;
// Email addresses *** here I've changed the expression ***
var emailAddressPattern = /(([a-zA-Z0-9_\-\.]+)#[a-zA-Z_]+?(?:\.[a-zA-Z]{2,6}))+/gim;
return this
.replace(urlPattern, '<a target="_blank" href="$&">$&</a>')
.replace(pseudoUrlPattern, '$1<a target="_blank" href="http://$2">$2</a>')
.replace(emailAddressPattern, '<a target="_blank" href="mailto:$1">$1</a>');
};
}
/**
* Convert URLs in a string to anchor buttons
* #param {!string} string
* #returns {!string}
*/
function URLify(string){
var urls = string.match(/(((ftp|https?):\/\/)[\-\w#:%_\+.~#?,&\/\/=]+)/g);
if (urls) {
urls.forEach(function (url) {
string = string.replace(url, '<a target="_blank" href="' + url + '">' + url + "</a>");
});
}
return string.replace("(", "<br/>(");
}
simple example
The best script to do this:
http://benalman.com/projects/javascript-linkify-process-lin/
This solution works like many of the others, and in fact uses the same regex as one of them, however in stead of returning a HTML String this will return a document fragment containing the A element and any applicable text nodes.
function make_link(string) {
var words = string.split(' '),
ret = document.createDocumentFragment();
for (var i = 0, l = words.length; i < l; i++) {
if (words[i].match(/[-a-zA-Z0-9#:%_\+.~#?&//=]{2,256}\.[a-z]{2,4}\b(\/[-a-zA-Z0-9#:%_\+.~#?&//=]*)?/gi)) {
var elm = document.createElement('a');
elm.href = words[i];
elm.textContent = words[i];
if (ret.childNodes.length > 0) {
ret.lastChild.textContent += ' ';
}
ret.appendChild(elm);
} else {
if (ret.lastChild && ret.lastChild.nodeType === 3) {
ret.lastChild.textContent += ' ' + words[i];
} else {
ret.appendChild(document.createTextNode(' ' + words[i]));
}
}
}
return ret;
}
There are some caveats, namely with older IE and textContent support.
here is a demo.
If you need to show shorter link (only domain), but with same long URL, you can try my modification of Sam Hasler's code version posted above
function replaceURLWithHTMLLinks(text) {
var exp = /(\b(https?|ftp|file):\/\/([-A-Z0-9+&##%?=~_|!:,.;]*)([-A-Z0-9+&##%?\/=~_|!:,.;]*)[-A-Z0-9+&##\/%=~_|])/ig;
return text.replace(exp, "<a href='$1' target='_blank'>$3</a>");
}
Reg Ex:
/(\b((https?|ftp|file):\/\/|(www))[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|]*)/ig
function UriphiMe(text) {
var exp = /(\b((https?|ftp|file):\/\/|(www))[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|]*)/ig;
return text.replace(exp,"<a href='$1'>$1</a>");
}
Below are some tested string:
Find me on to www.google.com
www
Find me on to www.http://www.com
Follow me on : http://www.nishantwork.wordpress.com
http://www.nishantwork.wordpress.com
Follow me on : http://www.nishantwork.wordpress.com
https://stackoverflow.com/users/430803/nishant
Note: If you don't want to pass www as valid one just use below reg ex:
/(\b((https?|ftp|file):\/\/|(www))[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/ig
The warnings about URI complexity should be noted, but the simple answer to your question is:
To replace every match you need to add the /g flag to the end of the RegEx:
/(\b(https?|ftp|file):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/gi
Try the below function :
function anchorify(text){
var exp = /(\b(https?|ftp|file):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])/ig;
var text1=text.replace(exp, "<a href='$1'>$1</a>");
var exp2 =/(^|[^\/])(www\.[\S]+(\b|$))/gim;
return text1.replace(exp2, '$1<a target="_blank" href="http://$2">$2</a>');
}
alert(anchorify("Hola amigo! https://www.sharda.ac.in/academics/"));
Keep it simple! Say what you cannot have, rather than what you can have :)
As mentioned above, URLs can be quite complex, especially after the '?', and not all of them start with a 'www.' e.g. maps.bing.com/something?key=!"£$%^*()&lat=65&lon&lon=20
So, rather than have a complex regex that wont meet all edge cases, and will be hard to maintain, how about this much simpler one, which works well for me in practise.
Match
http(s):// (anything but a space)+
www. (anything but a space)+
Where 'anything' is [^'"<>\s]
... basically a greedy match, carrying on to you meet a space, quote, angle bracket, or end of line
Also:
Remember to check that it is not already in URL format, e.g. the text contains href="..." or src="..."
Add ref=nofollow (if appropriate)
This solution isn't as "good" as the libraries mentioned above, but is much simpler, and works well in practise.
if html.match( /(href)|(src)/i )) {
return html; // text already has a hyper link in it
}
html = html.replace(
/\b(https?:\/\/[^\s\(\)\'\"\<\>]+)/ig,
"<a ref='nofollow' href='$1'>$1</a>"
);
html = html.replace(
/\s(www\.[^\s\(\)\'\"\<\>]+)/ig,
"<a ref='nofollow' href='http://$1'>$1</a>"
);
html = html.replace(
/^(www\.[^\s\(\)\'\"\<\>]+)/ig,
"<a ref='nofollow' href='http://$1'>$1</a>"
);
return html;
Correct URL detection with international domains & astral characters support is not trivial thing. linkify-it library builds regex from many conditions, and final size is about 6 kilobytes :) . It's more accurate than all libs, currently referenced in accepted answer.
See linkify-it demo to check live all edge cases and test your ones.
If you need to linkify HTML source, you should parse it first, and iterate each text token separately.
I've wrote yet another JavaScript library, it might be better for you since it's very sensitive with the least possible false positives, fast and small in size. I'm currently actively maintaining it so please do test it in the demo page and see how it would work for you.
link: https://github.com/alexcorvi/anchorme.js
I had to do the opposite, and make html links into just the URL, but I modified your regex and it works like a charm, thanks :)
var exp = /<a\s.*href=['"](\b(https?|ftp|file):\/\/[-A-Z0-9+&##\/%?=~_|!:,.;]*[-A-Z0-9+&##\/%=~_|])['"].*>.*<\/a>/ig;
source = source.replace(exp,"$1");
The e-mail detection in Travitron's answer above did not work for me, so I extended/replaced it with the following (C# code).
// Change e-mail addresses to mailto: links.
const RegexOptions o = RegexOptions.Multiline | RegexOptions.IgnoreCase;
const string pat3 = #"([a-zA-Z0-9_\-\.]+)#([a-zA-Z0-9_\-\.]+)\.([a-zA-Z]{2,6})";
const string rep3 = #"$1#$2.$3";
text = Regex.Replace(text, pat3, rep3, o);
This allows for e-mail addresses like "firstname.secondname#one.two.three.co.uk".
After input from several sources I've now a solution that works well. It had to do with writing your own replacement code.
Answer.
Fiddle.
function replaceURLWithHTMLLinks(text) {
var re = /(\(.*?)?\b((?:https?|ftp|file):\/\/[-a-z0-9+&##\/%?=~_()|!:,.;]*[-a-z0-9+&##\/%=~_()|])/ig;
return text.replace(re, function(match, lParens, url) {
var rParens = '';
lParens = lParens || '';
// Try to strip the same number of right parens from url
// as there are left parens. Here, lParenCounter must be
// a RegExp object. You cannot use a literal
// while (/\(/g.exec(lParens)) { ... }
// because an object is needed to store the lastIndex state.
var lParenCounter = /\(/g;
while (lParenCounter.exec(lParens)) {
var m;
// We want m[1] to be greedy, unless a period precedes the
// right parenthesis. These tests cannot be simplified as
// /(.*)(\.?\).*)/.exec(url)
// because if (.*) is greedy then \.? never gets a chance.
if (m = /(.*)(\.\).*)/.exec(url) ||
/(.*)(\).*)/.exec(url)) {
url = m[1];
rParens = m[2] + rParens;
}
}
return lParens + "<a href='" + url + "'>" + url + "</a>" + rParens;
});
}
Here's my solution:
var content = "Visit https://wwww.google.com or watch this video: https://www.youtube.com/watch?v=0T4DQYgsazo and news at http://www.bbc.com";
content = replaceUrlsWithLinks(content, "http://");
content = replaceUrlsWithLinks(content, "https://");
function replaceUrlsWithLinks(content, protocol) {
var startPos = 0;
var s = 0;
while (s < content.length) {
startPos = content.indexOf(protocol, s);
if (startPos < 0)
return content;
let endPos = content.indexOf(" ", startPos + 1);
if (endPos < 0)
endPos = content.length;
let url = content.substr(startPos, endPos - startPos);
if (url.endsWith(".") || url.endsWith("?") || url.endsWith(",")) {
url = url.substr(0, url.length - 1);
endPos--;
}
if (ROOTNS.utils.stringsHelper.validUrl(url)) {
let link = "<a href='" + url + "'>" + url + "</a>";
content = content.substr(0, startPos) + link + content.substr(endPos);
s = startPos + link.length;
} else {
s = endPos + 1;
}
}
return content;
}
function validUrl(url) {
try {
new URL(url);
return true;
} catch (e) {
return false;
}
}
Try Below Solution
function replaceLinkClickableLink(url = '') {
let pattern = new RegExp('^(https?:\\/\\/)?'+
'((([a-z\\d]([a-z\\d-]*[a-z\\d])*)\\.?)+[a-z]{2,}|'+
'((\\d{1,3}\\.){3}\\d{1,3}))'+
'(\\:\\d+)?(\\/[-a-z\\d%_.~+]*)*'+
'(\\?[;&a-z\\d%_.~+=-]*)?'+
'(\\#[-a-z\\d_]*)?$','i');
let isUrl = pattern.test(url);
if (isUrl) {
return `${url}`;
}
return url;
}
Replace URLs in text with HTML links, ignore the URLs within a href/pre tag.
https://github.com/JimLiu/auto-link
worked for me :
var urlRegex =/(\b((https?|ftp|file):\/\/)?((([a-z\d]([a-z\d-]*[a-z\d])*)\.)+[a-z]{2,}|((\d{1,3}\.){3}\d{1,3}))(\:\d+)?(\/[-a-z\d%_.~+]*)*(\?[;&a-z\d%_.~+=-]*)?(\#[-a-z\d_]*)?)/ig;
return text.replace(urlRegex, function(url) {
var newUrl = url.indexOf("http") === -1 ? "http://" + url : url;
return '' + url + '';
});
var string = "https://example.com/app/something";
var string = "example.com/app/something";
new URL(string.origin)
If string have protocol all ok, and if not. have error Failed to construct 'URL': Invalid URL(…)
How can I obtain the root domain without using regex?
The question is still a bit unclear, and I'm not entirely sure how you're getting that string, but just for the sake of argument, here's a quick solution:
function getHostname(str)
{
str = (/^\w+:\/\//.test(str) ? "" : "http://") + str
return new URL(str).hostname;
}
console.log(getHostname("https://example.com/app/something"));
console.log(getHostname("example.com/app/something"));
Yes, technically, this technically does use a regular expression to check if the protocol is present, but it uses the URL class actually parse the host name.
Regex example:
var example1 = "www.example1.com/test/path";
var example2 = "https://example2.com/test/path";
var example3 = "http://subdomain.example3.com/test/path";
function getDomain(str) {
var matches = str.match(/^(?:https?:\/\/)?((?:[-A-Za-z0-9]+\.)+[A-Za-z]{2,6})/);
if (!matches || matches.length < 2) return '';
return matches[1];
}
console.log(getDomain(example1));
console.log(getDomain(example2));
console.log(getDomain(example3));
References:
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/match
http://regexr.com/
If I understand your question correctly, you want to check if the URL contains either the http or https protocol. This can easily be done with string functions built into JavaScript as shown below.
var string = window.location;
if (string.includes('http') || string.includes('https'))
{
//Do your logic here
}
UPDATE: Alternatively, you could use substring functionality shown below.
var string = window.location;
if (string.indexOf('http') == 0)
{
//Do your logic here
}
Note that this will also verify that the http is at the beginning of the string and not just thrown in willy nilly.
I need to remove the last part of the url from a span..
I have
<span st_url="http://localhost:8888/careers/php-web-developer-2"
st_title="PHP Web Developer 2" class="st_facebook_large" displaytext="facebook"
st_processed="yes"></span></span>
And I need to take the st_url and remove the php-web-developer-2 from it so it is just http://localhost:8888/careers/.
But I am not sure how to do that. php-web-developer-2 will not always be that but it won't have any / in it. It will always be a - separated string.
Any Help!!??
as simple as this:
var to = url.lastIndexOf('/');
to = to == -1 ? url.length : to + 1;
url = url.substring(0, to);
Here is a slightly simpler way:
url = url.slice(0, url.lastIndexOf('/'));
$('span').attr('st_url', function(i, url) {
var str = url.substr(url.lastIndexOf('/') + 1) + '$';
return url.replace( new RegExp(str), '' );
});
DEMO
Use this.
$('span').attr('st_url', function(i, url) {
var to = url.lastIndexOf('/') +1;
x = url.substring(0,to);
alert(x);
})
You can see Demo
You could use a regular expression to parse the 'last piece of the url':
var url="http://localhost:8888/careers/php-web-developer";
var baseurl=url.replace(new RegExp("(.*/)[^/]+$"),"$1");
The RegExp thing basically says: "match anything, then a slash and then all non-slashes till the end of the string".
The replace function takes that matching part, and replaces it with the "anything, then a slash" part of the string.
RegexBuddy has a great deal of information on all this.
You can see it work here: http://jsfiddle.net/xKxLR/
var url = "http://localhost:8888/careers/php-web-developer-2";
var regex = new RegExp('/[^/]*$');
console.log(url.replace(regex, '/'));
First you need to parse the tag. Next try to extract st_url value which is your url. Then use a loop from the last character of the extracted url and omit them until you see a '/'. This is how you should extract what you want. Keep this in mind and try to write the code .