I am working on a form builder application. I need to store the events for the particular element into the database at design level and retrieve the events when the form is in published state.
I am storing the events as follows and this is example with more than one event for a control:
Structure of saving events in Database for one element:
{
Event:
{
EventType: "click",
EventHandler: "var i = 0; alert(i);"
},
Event:
{
EventType: "change",
EventHandler: "var i = 0; alert(i);"
}
}
Example HTML Code:
I am giving an example for textbox control in a form builder.
<input type="text" id="text1" />
On publishing the built form, I need to bind the above events for the built form which contains only one textbox.
Current Approach:
What I did is, I used eval() to execute the code and my code is as follows:
function BindEventsForControl(controlId,eventType,eventHandlerValue){
//Contruct the event string
var scriptString = "$(document).on('"+ eventType +"',"'+ controlId +"',function(){"+ eventHandlerValue +"});"
//Evaluate the above expression
eval(scriptString);
}
The above method works perfectly.
My concern:
I need to call BindEventsForControl() for each control in a form and need to use eval() many times. Is this feasible ?
My question:
Is my approach feasible ? Is there any better approach out there? Again, I am mentioning I want to execute the events stored as string.
If you know anyother new method, then kindly help me with that.
Also, I am using Knockout.js in my application. Is there any way to approach with knockout.js for these kind of scenario ?
Related
In CKEditor 4 I want to fire some action on key and paste events. I've got working code for single event:
$('#some_id').ckeditor({
some: config
}).ckeditor().editor.on('key', function(evt) {
//some action here
});
And I don't want to repeat all code for next event. I've searched ckeditor docs - and it says that on method takes only string, so give it an array of events isn't possible. I've tried pass multiple events as string key, paste - it wasn't best idea. Another way could be made an array of events and iterate it with code above - this solution seems to be not ideal, but the best I can figure out for now. Have You any better ideas for this problem?
Since nobody have any idea in this matter, I finished with best solution I could figure out on this moment: provide array of events and iterate it. I paste here my solution for others facing same dillema:
var editor = $('#textarea').ckeditor({
//some:config
}).ckeditor().editor;
var events = ['event1', 'event2'];
for (event of events) {
editor.on(event, function(evt) {
//Yours actions
}
}
I'm trying to write a bookmarklet to autofill a form, to simplify manual testing. The site is implemented in React. I've tried using JQuery, for example:
$("#emailAddress").val("bob#example.com").changed()
While the input field is visibly updated in the browser, it appears that under the hood the field is not recognised as changed, as validation fails on form submit, saying the data is missing.
Is there a workable way to autopopulate the React form fields using ad-hoc JS, without changing any of the source code?
(Note: I understand that this sort of direct manipulation is not the correct way to work with React in general app development. Here, I'm looking for any solution, no matter how hacky, to simplify ad-hoc manual testing).
//find element
let elem = document.querySelector("#emailAddress");
//create event
let event = new Event('input', { bubbles: true });
//set value
elem.value="bob#example.com";
//trigger event
elem.dispatchEvent(event)
From our discussion in the comments, my guess is that you'll want to fire a change event for each input you plan on modifying.
var element = document.getElementById('emailAddress'),
event = {
target: {
value: 'new value for the input'
}
};
element.onchange(event);
I'm a fairly experienced knockout user, so I understand quite a bit of the under the hood stuff, I have however been battling now for a few days trying to figure out how to achieve a given scenario.
I have to create a system that allows observable's within a given knockout component to be able to translate themselves to different languages.
to facilitate this, I've created a custom binding, which is applied to a given element in the following way.
<p data-bind="translatedText: {observable: translatedStringFour, translationToken: 'testUiTransFour'}"></p>
This is in turn attached to a property in my knockout component with a simple standard observable
private translatedStringFour: KnockoutObservable<string> = ko.observable<string>("I'm an untranslated string four....");
(YES, I am using typescript for the project, but TS/JS either I can work with.....)
With my custom binding I can still do 'translatedStringFour("foo")' and it will still update in exactly the same way as the normal text binding.
Where storing the translations in the HTML5 localStorage key/value store, and right at the beginning when our app is launched, there is another component that's responsible, for taking a list of translation ID's and requesting the translated strings from our app, based on the users chosen language.
These strings are then stored in localStorage using the translationToken (seen in the binding) as the key.
This means that when the page loads, and our custom bind fires, we can grab the translationToken off the binding, and interrogate localStorage to ask for the value to replace the untranslated string with, the code for our custom binding follows:
ko.bindingHandlers.translatedText = {
init: (element: HTMLElement, valueAccessor: Function, allBindings: KnockoutAllBindingsAccessor, viewModel: any, bindingContext: KnockoutBindingContext) => {
// Get our custom binding values
var value = valueAccessor();
var associatedObservable = value.observable;
var translationToken = value.translationToken;
},
update: (element: HTMLElement, valueAccessor: Function, allBindings: KnockoutAllBindingsAccessor, viewModel: any, bindingContext: KnockoutBindingContext) => {
// Get our custom binding values
var value = valueAccessor();
var associatedObservable = value.observable;
var translationToken = value.translationToken;
// Ask local storage if we have a token by that name
var translatedText = sessionStorage[translationToken];
// Check if our translated text is defined, if it's not then substitute it for a fixed string that will
// be seen in the UI (We should really not change this but this is for dev purposes so we can see whats missing)
if (undefined === translatedText) {
translatedText = "No Translation ID";
}
associatedObservable(translatedText);
ko.utils.setTextContent(element, associatedObservable());
}
}
Now, thus far this works brilliantly, as long as the full cache of translations has been loaded into localStorage, the observables will self translate with the correct strings as needed.
HOWEVER......
Because this translation loader may take more than a few seconds, and the initial page that it's loading on also needs to have some elements translated, the first time the page is loaded it is very possible that the translations the UI is asking for have not yet been loaded into into localStorage, or may be in the process of still loading.
Handling this is not a big deal, I'm performing the load using a promise, so the load takes place, my then clause fires, and I do something like
window.postMessage(...);
or
someElement.dispatchEvent(...);
or even (my favorite)
ko.postbox.publish(...)
The point here is I have no shortage of ways to raise an event/message of some description to notify the page and/or it's components that the translations have finished loading, and you are free to retry requesting them if you so wish.
HERE IN.... Lies my problem.
I need the event/message handler that receives this message to live inside the binding handler, so that the very act of me "binding" using our custom binding, will add the ability for this element to receive this event/message, and be able to retry.
This is not a problem for other pages in the application, because by the time the user has logged in, and all that jazz the translations will have loaded and be safely stored in local storage.
I'm more than happy to use post box (Absolutely awesome job by the way Ryan -- if your reading this.... it's an amazingly useful plugin, and should be built into the core IMHO) but, I intend to wrap this binding in a stand alone class which I'll then just load with requireJs as needed, by those components that need it. I cannot however guarantee that postbox will be loaded before or even at the same instant the binding is loaded.
Every other approach i've tried to get an event listener working in the binding have just gotten ignored, no errors or anything, they just don't fire.
I've tried using the postmessage api, I've tried using a custom event, I've even tried abusing JQuery, and all to no avail.
I've scoured the KO source code, specifically the event binding, and the closest I've come to attaching an event in the init handler is as follows:
init: (element: HTMLElement, valueAccessor: Function, allBindings: KnockoutAllBindingsAccessor, viewModel: any, bindingContext: KnockoutBindingContext) => {
// Get our custom binding values
var value = valueAccessor();
var associatedObservable = value.observable;
var translationToken = value.translationToken;
// Set up an event handler that will respond to events on session storage, by doing this
// the custom binding will instantly update when a key matching it's translation ID is loaded into the
// local session store
//ko.utils.registerEventHandler(element, 'storage', (event) => {
// console.log("Storage event");
// console.log(event);
//});
ko.utils.registerEventHandler(element, 'customEvent', (event) => {
console.log("HTML5 custom event recieved in the binding handler.");
console.log(event);
});
},
None of this has worked, so folks of the Knockout community.....
How do I add an event handler inside of a custom binding, that I can then trigger from outside that binding, but without depending on anything other than Knockout core and my binding being loaded.
Shawty
Update (About an hour later)
I wanted to add this part, beacuse it's not 100% clear why Regis's answer solves my problem.
Effectively, I was using exactly the same method, BUT (and this is the crucial part) I was targeting the "element" that came in as part of the binding.
This is my mind was the correct approach, as I wanted the event to stick specifically with the element the binding was applied too, as it was said element that I wanted to re-try it's translation once it knew it had the go-ahead.
However, after looking at Regis's code, and comparing it to mine, I noticed he was attaching his event handlers to the "Window" object, and not the "Element".
Following up on this, I too changed my code to use the window object, and everything I'd been attempting started to work.
More's the point, the element specific targeting works too, so I get the actual event, on the actual element, in the actual binding that needs to re-try it's translation.
[EDIT: trying to better answer the question]
I don't really get the whole point of the question, since I don't see how sessionStorage load can be asynchronous.
I supposed therefore sessionStorage is populated from som asynchronous functions like an ajax call to a translation API.
But I don't see what blocks you here, since you already have all the code in your question:
var sessionStorageMock = { // mandatory to mock in code snippets: initially empty
};
var counter = 0;
var attemptTranslation = function() {
setInterval(function() { // let's say it performs some AJAX calls which result is cached in the sessionStorage
var token = "token"; // that should be a collection
sessionStorageMock[token] = "after translation " + (counter++); // we're done, notifying event handlers
window.dispatchEvent(new Event("translation-" + token));
}, 500);
};
ko.bindingHandlers.translated = {
init: function(element, valueAccessor, allBindings, viewModel, bindingContext) {
var val = valueAccessor();
var token = val.token;
console.log("init");
window.addEventListener("translation-" + token, function() {
if (token && sessionStorageMock[token]) {
val.observable(sessionStorageMock[token]);
}
});
}
};
var vm = function() {
this.aftertranslation = ko.observable("before translation");
};
ko.applyBindings(new vm());
attemptTranslation();
<script src="https://cdnjs.cloudflare.com/ajax/libs/knockout/3.2.0/knockout-min.js"></script>
<div data-bind="translated: { observable: aftertranslation, token: 'token' }, text: aftertranslation" />
I'm working on a validation project and I currently have it set up where my inputs are listed as objects. I currently have this code to setup and run the events:
setup method and functions used
function setup(obj) {
obj.getElement().onfocus = function() {startVal(obj)}
obj.getElement().onblur = function() {endVal(obj)}
}
function startVal(obj) {
obj.getElement().onkeyup = validate(obj)
}
function endVal(obj) {
obj.getElement().onkeyup = ""
}
Take note to how I have it where the onkeyup event should set when the object is receives focus, However when I activate the input it acts like I tagged the validate() function directly to the onfocus and it only validates when I initially focus the input.
edit the reason I have it set up this way is so that I don't have every single one of my form elements validating each time I launch an onkeyup event(which would be a lot since forms usually involve a decent amount of typing). I got it to work by simply attaching the validate() function to the onkeyup event. I just would prefer limit it this way so the there's no unnecessary processing.
Can you not set events with other events or is there something more specific that I'm doing wrong?
Any help is appreciated!
Here is some additional information that might help:
getElement Method
function getElement() {
return document.getElementById(this.id)
}
setEvents function
function setEvents() {
firstName.setup(firstName)
}
You are calling validate directly. Unless it is returning a function, it won't work (maybe you should have read my other answer more thoroughly ;)). I think you want:
obj.getElement().onkeyup = function() {validate(obj)};
And as I stated in my comment, there is no reason to add or remove the event handler on focus. The keyup event is only raised if the element receives input, so not when other elements receive input.
In my JavaScript and Flex applications, users often perform actions that I want other JavaScript code on the page to listen for. For example, if someone adds a friend. I want my JavaScript app to then call something like triggerEvent("addedFriend", name);. Then any other code that was listening for the "addedFriend" event will get called along with the name.
Is there a built-in JavaScript mechanism for handling events? I'm ok with using jQuery for this too and I know jQuery makes extensive use of events. But with jQuery, it seems that its event mechanism is all based around elements. As I understand, you have to tie a custom event to an element. I guess I can do that to a dummy element, but my need has nothing to do with DOM elements on a webpage.
Should I just implement this event mechanism myself?
You have a few options:
jQuery does allow you to do this with objects not associated with the document. An example is provided below.
If you're not already using jQuery on your page, then adding it is probably overkill. There are other libraries designed for this. The pattern you are referring to is called PubSub or Publish/Subscribe.
Implement it yourself, as you've suggested, since this is not difficult if you're looking only for basic functionality.
jQuery example:
var a = {};
jQuery(a).bind("change", function () {
alert("I changed!");
});
jQuery(a).trigger("change");
I would implement such using MVVM pattern with knockjs library.
Just create an element, and use jquery events on it.
It can be just a global variable, doesn't even have to be connected to the DOM.
That way you accomplish your task easily and without any extra libs.
Isn't it possible to bind onchange events in addition to click events? For instance, if addFriend is called and modifies a list on the page, you could bind the change event to then invoke additional functionality.
$('#addFriendButton').click( function() {
// modify the #friendList list
});
$('#friendList').change( function() {
myOtherAction();
});
This is total Host independent, no need for jQuery or dom in this case!
function CustomEvents(){
//object holding eventhandlers
this.handlers_ = {};
}
//check if the event type does not exist, create it.
//then push new callback in array.
CustomEvents.prototype.addEventListner = function (type, callBack){
if (!this.handlers_[type]) this.handlers_[type] = [];
this.handlers_[type].push(callBack);
}
CustomEvents.prototype.triggerEvent = function (type){
//trigger all handlers attached to events
if (!this.handlers_[type]) return;
for (var i=0, handler; handler = this.handlers_[type][i]; i++)
{
//call handler function and supply all the original arguments of this function
//minus the first argument which is the type of the event itself
if (typeof handler === "function") handler.apply(this,arguments.slice(1));
}
}
//delete all handlers to an event
CustomEvents.prototype.purgeEventType = function(type){
return delete this.handlers_[type];
}
test:
var customEvents = new CustomEvents();
customEvents.addEventListner("event A", function(arg){alert('Event A with arguments' + arg);));
customEvents.triggerEvent("event A", "the args");
EDIT added arguments passing