i am using jquery to validate textbox value.
I have 2 textbox, txt1 & txt2. now, i wrote a jquery function.
$("#txt1").blur(function () {
if ($("#txt1").val() == "") {
$("#scarriername").show();
$("#txt1").focus();
}
else {
$("#scarriername").hide();
}
});
$("#txt2").blur(function () {
if ($("#txt2").val() == "") {
$("#sscaccode").show();
$("#txt2").focus();
}
else {
$("#sscaccode").hide();
}
});
Now, issue is. when i run the project. my position is on txt1 and when u use Tab to go txt2 with null or blank value. Focus event fire for both one & browser become hang due to infinite loop of FOCUS.
so, how can i handle it?
You should insert a setTimeout in order to set the focus after the blur event.
Second, you should insert a semaphore in order to avoid a loop (see code and comments):
var status = "valid"; // semaphore
$("#txt1").blur(function (e) {
// if we are in programmatically focus, ignore this handler
if(status == "invalid")
return ;
if ($("#txt1").val() == "") {
$("#scarriername").show();
// set semaphore
status = "invalid";
// use setTimeout in order to set focus in the right moment
setTimeout(function() {$("#txt1").focus(); status = "valid"},0);
}
else {
$("#scarriername").hide();
}
});
// same as txt1
$("#txt2").blur(function () {
if(status == "invalid")
return ;
if ($("#txt2").val() == "") {
$("#sscaccode").show();
setTimeout(function() {$("#txt2").focus(); status = "valid"},0);
}
else {
$("#sscaccode").hide();
}
});
DEMO http://jsfiddle.net/SszUf/
try this
<input type="text" id="txt1" />
<input type="text" id="txt2" />
$("#txt2").focus(function () {
if ($("#txt1").val() == "") {
$("#scarriername").show();
$("#txt1").focus();
}
//alert(1);
});
hope this help you
Apparently when you hit the tab button you trigger blur event for both text boxes. With your code when txt1 gets blurred and has no content you get the focus on txt1, but when you do that you also trigger the blur event for txt2 and since it does not have any text in it you get the focus back to txt2. This keeps on going and going, focusing on txt1 and then txt2 and then txt1 and then txt2... You could put a simple if check on the second blur event handler to see if txt1 is still empty, and if so keep the focus on txt1 not allowing the client to pass to txt2:
$("#txt1").blur(function () {
if ($("#txt1").val() == "") {
$("#scarriername").show();
$("#txt1").focus();
}
else {
$("#scarriername").hide();
}
});
$("#txt2").blur(function () {
if ($("#txt2").val() == "" && $("#txt1").val() != "") {
$("#sscaccode").show();
$("#txt2").focus();
}
else {
$("#sscaccode").hide();
}
});
This is also one of the approach to solve your problem on pressing tab key.
$("#txt1").bind('keydown',function(e)
{
if(e.keyCode == 9)
{
if ($("#txt1").val() == "") {
$("#scarriername").show();
return false;
}
else {
$("#scarriername").hide();
}
}
});
$("#txt2").bind('keydown',function(e)
{
if(e.keyCode == 9)
{
if ($("#txt2").val() == "") {
$("#sscaccode").show();
return false;
}
else {
$("#sscaccode").hide();
}
}
});
$("#txt1").blur(function () {
if ($("#txt1").val() == "") {
$("#scarriername").show();
if ($("input:focus").length == 0)
$("#txt1").focus();
}
else {
$("#scarriername").hide();
}
});
Just add a line can solve this problem
By the way, the #scarriername should not be something like popup window, which will trigger other blur events
You can test the file below:
<!doctype html>
<html>
<head>
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js"></script>
</head>
<body>
<input id="txt1"><input id="txt2"><input id="txt3"><input id="txt4">
<hr>
<h1 id="h1"></h1>
</body>
<script type="text/javascript">
$(function(){
$("input").blur(function () {
if ($(this).val() == "") {
document.getElementById("h1").innerHTML += "123";
$(this).focus();
}
});});
</script>
</html>
I'm looking to create a form where pressing the enter key causes focus to go to the "next" form element on the page. The solution I keep finding on the web is...
<body onkeydown="if(event.keyCode==13){event.keyCode=9; return event.keyCode}">
Unfortunately, that only seems to work in IE. So the real meat of this question is if anybody knows of a solution that works for FF and Chrome? Additionally, I'd rather not have to add onkeydown events to the form elements themselves, but if that's the only way, it will have to do.
This issue is similar to question 905222, but deserving of it's own question in my opinion.
Edit: also, I've seen people bring up the issue that this isn't good style, as it diverges from form behavior that users are used to. I agree! It's a client request :(
I used the logic suggested by Andrew which is very effective. And this is my version:
$('body').on('keydown', 'input, select', function(e) {
if (e.key === "Enter") {
var self = $(this), form = self.parents('form:eq(0)'), focusable, next;
focusable = form.find('input,a,select,button,textarea').filter(':visible');
next = focusable.eq(focusable.index(this)+1);
if (next.length) {
next.focus();
} else {
form.submit();
}
return false;
}
});
KeyboardEvent's keycode (i.e: e.keycode) depreciation notice :- https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/keyCode
The simplest vanilla JS snippet I came up with:
document.addEventListener('keydown', function (event) {
if (event.keyCode === 13 && event.target.nodeName === 'INPUT') {
var form = event.target.form;
var index = Array.prototype.indexOf.call(form, event.target);
form.elements[index + 1].focus();
event.preventDefault();
}
});
Works in IE 9+ and modern browsers.
Map [Enter] key to work like the [Tab] key
I've rewritten Andre Van Zuydam's answer, which didn't work for me, in jQuery. This caputures both Enter and Shift+Enter. Enter tabs forward, and Shift+Enter tabs back.
I've also rewritten the way self is initialized by the current item in focus. The form is also selected that way. Here's the code:
// Map [Enter] key to work like the [Tab] key
// Daniel P. Clark 2014
// Catch the keydown for the entire document
$(document).keydown(function(e) {
// Set self as the current item in focus
var self = $(':focus'),
// Set the form by the current item in focus
form = self.parents('form:eq(0)'),
focusable;
// Array of Indexable/Tab-able items
focusable = form.find('input,a,select,button,textarea,div[contenteditable=true]').filter(':visible');
function enterKey(){
if (e.which === 13 && !self.is('textarea,div[contenteditable=true]')) { // [Enter] key
// If not a regular hyperlink/button/textarea
if ($.inArray(self, focusable) && (!self.is('a,button'))){
// Then prevent the default [Enter] key behaviour from submitting the form
e.preventDefault();
} // Otherwise follow the link/button as by design, or put new line in textarea
// Focus on the next item (either previous or next depending on shift)
focusable.eq(focusable.index(self) + (e.shiftKey ? -1 : 1)).focus();
return false;
}
}
// We need to capture the [Shift] key and check the [Enter] key either way.
if (e.shiftKey) { enterKey() } else { enterKey() }
});
The reason textarea
is included is because we "do" want to tab into it. Also, once in, we don't want to stop the default behavior of Enter from putting in a new line.
The reason a and button
allow the default action, "and" still focus on the next item, is because they don't always load another page. There can be a trigger/effect on those such as an accordion or tabbed content. So once you trigger the default behavior, and the page does its special effect, you still want to go to the next item since your trigger may have well introduced it.
Thank you for the good script.
I have just added the shift event on the above function to go back between elements, I thought someone may need this.
$('body').on('keydown', 'input, select, textarea', function(e) {
var self = $(this)
, form = self.parents('form:eq(0)')
, focusable
, next
, prev
;
if (e.shiftKey) {
if (e.keyCode == 13) {
focusable = form.find('input,a,select,button,textarea').filter(':visible');
prev = focusable.eq(focusable.index(this)-1);
if (prev.length) {
prev.focus();
} else {
form.submit();
}
}
}
else
if (e.keyCode == 13) {
focusable = form.find('input,a,select,button,textarea').filter(':visible');
next = focusable.eq(focusable.index(this)+1);
if (next.length) {
next.focus();
} else {
form.submit();
}
return false;
}
});
This worked for me:
$(document).on('keydown', ':tabbable', function(e) {
if (e.key === "Enter") {
e.preventDefault();
var $canfocus = $(':tabbable:visible');
var index = $canfocus.index(document.activeElement) + 1;
if (index >= $canfocus.length) index = 0;
$canfocus.eq(index).focus();
}
});
Changing this behaviour actually creates a far better user experience than the default behaviour implemented natively. Consider that the behaviour of the enter key is already inconsistent from the user's point of view, because in a single line input, enter tends to submit a form, while in a multi-line textarea, it simply adds a newline to the contents of the field.
I recently did it like this (uses jQuery):
$('input.enterastab, select.enterastab, textarea.enterastab').live('keydown', function(e) {
if (e.keyCode==13) {
var focusable = $('input,a,select,button,textarea').filter(':visible');
focusable.eq(focusable.index(this)+1).focus();
return false;
}
});
This is not terribly efficient, but works well enough and is reliable - just add the 'enterastab' class to any input element that should behave in this way.
I reworked the OPs solution into a Knockout binding and thought I'd share it. Thanks very much :-)
Here's a Fiddle
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js" type="text/javascript"></script>
<script src="http://ajax.aspnetcdn.com/ajax/knockout/knockout-2.2.1.js" type="text/javascript"></script>
</head>
<body>
<div data-bind="nextFieldOnEnter:true">
<input type="text" />
<input type="text" />
<select>
<option value="volvo">Volvo</option>
<option value="saab">Saab</option>
<option value="mercedes">Mercedes</option>
<option value="audi">Audi</option>
</select>
<input type="text" />
<input type="text" />
</div>
<script type="text/javascript">
ko.bindingHandlers.nextFieldOnEnter = {
init: function(element, valueAccessor, allBindingsAccessor) {
$(element).on('keydown', 'input, select', function (e) {
var self = $(this)
, form = $(element)
, focusable
, next
;
if (e.keyCode == 13) {
focusable = form.find('input,a,select,button,textarea').filter(':visible');
var nextIndex = focusable.index(this) == focusable.length -1 ? 0 : focusable.index(this) + 1;
next = focusable.eq(nextIndex);
next.focus();
return false;
}
});
}
};
ko.applyBindings({});
</script>
</body>
</html>
Here is an angular.js directive to make enter go to the next field using the other answers as inspiration. There is some, perhaps, odd looking code here because I only use the jQlite packaged with angular. I believe most of the features here work in all browsers > IE8.
angular.module('myapp', [])
.directive('pdkNextInputOnEnter', function() {
var includeTags = ['INPUT', 'SELECT'];
function link(scope, element, attrs) {
element.on('keydown', function (e) {
// Go to next form element on enter and only for included tags
if (e.keyCode == 13 && includeTags.indexOf(e.target.tagName) != -1) {
// Find all form elements that can receive focus
var focusable = element[0].querySelectorAll('input,select,button,textarea');
// Get the index of the currently focused element
var currentIndex = Array.prototype.indexOf.call(focusable, e.target)
// Find the next items in the list
var nextIndex = currentIndex == focusable.length - 1 ? 0 : currentIndex + 1;
// Focus the next element
if(nextIndex >= 0 && nextIndex < focusable.length)
focusable[nextIndex].focus();
return false;
}
});
}
return {
restrict: 'A',
link: link
};
});
Here's how I use it in the app I'm working on, by just adding the pdk-next-input-on-enter directive on an element. I am using a barcode scanner to enter data into fields, the default function of the scanner is to emulate a keayboard, injecting an enter key after typing the data of the scanned barcode.
There is one side-effect to this code (a positive one for my use-case), if it moves focus onto a button, the enter keyup event will cause the button's action to be activated. This worked really well for my flow as the last form element in my markup is a button that I want activated once all the fields have been "tabbed" through by scanning barcodes.
<!DOCTYPE html>
<html ng-app=myapp>
<head>
<script src="angular.min.js"></script>
<script src="controller.js"></script>
</head>
<body ng-controller="LabelPrintingController">
<div class='.container' pdk-next-input-on-enter>
<select ng-options="p for p in partNumbers" ng-model="selectedPart" ng-change="selectedPartChanged()"></select>
<h2>{{labelDocument.SerialNumber}}</h2>
<div ng-show="labelDocument.ComponentSerials">
<b>Component Serials</b>
<ul>
<li ng-repeat="serial in labelDocument.ComponentSerials">
{{serial.name}}<br/>
<input type="text" ng-model="serial.value" />
</li>
</ul>
</div>
<button ng-click="printLabel()">Print</button>
</div>
</body>
</html>
Try this...
$(document).ready(function () {
$.fn.enterkeytab = function () {
$(this).on('keydown', 'input,select,text,button', function (e) {
var self = $(this)
, form = self.parents('form:eq(0)')
, focusable
, next
;
if (e.keyCode == 13) {
focusable = form.find('input,a,select').filter(':visible');
next = focusable.eq(focusable.index(this) + 1);
if (next.length) {
//if disable try get next 10 fields
if (next.is(":disabled")){
for(i=2;i<10;i++){
next = focusable.eq(focusable.index(this) + i);
if (!next.is(":disabled"))
break;
}
}
next.focus();
}
return false;
}
});
}
$("form").enterkeytab();
});
I've had a similar problem, where I wanted to press + on the numpad to tab to the next field. Now I've released a library that I think will help you.
PlusAsTab: A jQuery plugin to use the numpad plus key as a tab key equivalent.
Since you want enter/↵ instead, you can set the options. Find out which key you want to use with the jQuery event.which demo.
JoelPurra.PlusAsTab.setOptions({
// Use enter instead of plus
// Number 13 found through demo at
// https://api.jquery.com/event.which/
key: 13
});
// Matches all inputs with name "a[]" (needs some character escaping)
$('input[name=a\\[\\]]').plusAsTab();
You can try it out yourself in the PlusAsTab enter as tab demo.
function return2tab (div)
{
document.addEventListener('keydown', function (ev) {
if (ev.key === "Enter" && ev.target.nodeName === 'INPUT') {
var focusableElementsString = 'a[href], area[href], input:not([disabled]), select:not([disabled]), textarea:not([disabled]), button:not([disabled]), iframe, object, embed, [tabindex="0"], [contenteditable]';
let ol= div.querySelectorAll(focusableElementsString);
for (let i=0; i<ol.length; i++) {
if (ol[i] === ev.target) {
let o= i<ol.length-1? ol[i+1]: o[0];
o.focus(); break;
}
}
ev.preventDefault();
}
});
}
I have it working in only JavaScript. Firefox won't let you update the keyCode, so all you can do is trap keyCode 13 and force it to focus on the next element by tabIndex as if keyCode 9 was pressed. The tricky part is finding the next tabIndex. I have tested this only on IE8-IE10 and Firefox and it works:
function ModifyEnterKeyPressAsTab(event)
{
var caller;
var key;
if (window.event)
{
caller = window.event.srcElement; //Get the event caller in IE.
key = window.event.keyCode; //Get the keycode in IE.
}
else
{
caller = event.target; //Get the event caller in Firefox.
key = event.which; //Get the keycode in Firefox.
}
if (key == 13) //Enter key was pressed.
{
cTab = caller.tabIndex; //caller tabIndex.
maxTab = 0; //highest tabIndex (start at 0 to change)
minTab = cTab; //lowest tabIndex (this may change, but start at caller)
allById = document.getElementsByTagName("input"); //Get input elements.
allByIndex = []; //Storage for elements by index.
c = 0; //index of the caller in allByIndex (start at 0 to change)
i = 0; //generic indexer for allByIndex;
for (id in allById) //Loop through all the input elements by id.
{
allByIndex[i] = allById[id]; //Set allByIndex.
tab = allByIndex[i].tabIndex;
if (caller == allByIndex[i])
c = i; //Get the index of the caller.
if (tab > maxTab)
maxTab = tab; //Get the highest tabIndex on the page.
if (tab < minTab && tab >= 0)
minTab = tab; //Get the lowest positive tabIndex on the page.
i++;
}
//Loop through tab indexes from caller to highest.
for (tab = cTab; tab <= maxTab; tab++)
{
//Look for this tabIndex from the caller to the end of page.
for (i = c + 1; i < allByIndex.length; i++)
{
if (allByIndex[i].tabIndex == tab)
{
allByIndex[i].focus(); //Move to that element and stop.
return;
}
}
//Look for the next tabIndex from the start of page to the caller.
for (i = 0; i < c; i++)
{
if (allByIndex[i].tabIndex == tab + 1)
{
allByIndex[i].focus(); //Move to that element and stop.
return;
}
}
//Continue searching from the caller for the next tabIndex.
}
//The caller was the last element with the highest tabIndex,
//so find the first element with the lowest tabIndex.
for (i = 0; i < allByIndex.length; i++)
{
if (allByIndex[i].tabIndex == minTab)
{
allByIndex[i].focus(); //Move to that element and stop.
return;
}
}
}
}
To use this code, add it to your html input tag:
<input id="SomeID" onkeydown="ModifyEnterKeyPressAsTab(event);" ... >
Or add it to an element in javascript:
document.getElementById("SomeID").onKeyDown = ModifyEnterKeyPressAsTab;
A couple other notes:
I only needed it to work on my input elements, but you could extend it to other document elements if you need to. For this, getElementsByClassName is very helpful, but that is a whole other topic.
A limitation is that it only tabs between the elements that you have added to your allById array. It does not tab around to the other things that your browser might, like toolbars and menus outside your html document. Perhaps this is a feature instead of a limitation. If you like, trap keyCode 9 and this behavior will work with the tab key too.
You can use my code below, tested in Mozilla, IE, and Chrome
// Use to act like tab using enter key
$.fn.enterkeytab=function(){
$(this).on('keydown', 'input, select,', function(e) {
var self = $(this)
, form = self.parents('form:eq(0)')
, focusable
, next
;
if (e.keyCode == 13) {
focusable = form.find('input,a,select,button').filter(':visible');
next = focusable.eq(focusable.index(this)+1);
if (next.length) {
next.focus();
} else {
alert("wd");
//form.submit();
}
return false;
}
});
}
How to Use?
$("#form").enterkeytab(); // enter key tab
If you can I would reconsider doing this: the default action of pressing <Enter> while in a form submits the form and anything you do to change this default action / expected behaviour could cause some usability issues with the site.
Vanilla js with support for Shift + Enter and ability to choose which HTML tags are focusable. Should work IE9+.
onKeyUp(e) {
switch (e.keyCode) {
case 13: //Enter
var focusableElements = document.querySelectorAll('input, button')
var index = Array.prototype.indexOf.call(focusableElements, document.activeElement)
if(e.shiftKey)
focus(focusableElements, index - 1)
else
focus(focusableElements, index + 1)
e.preventDefault()
break;
}
function focus(elements, index) {
if(elements[index])
elements[index].focus()
}
}
Here's what I came up with.
form.addEventListener("submit", (e) => { //On Submit
let key = e.charCode || e.keyCode || 0 //get the key code
if (key = 13) { //If enter key
e.preventDefault()
const inputs = Array.from(document.querySelectorAll("form input")) //Get array of inputs
let nextInput = inputs[inputs.indexOf(document.activeElement) + 1] //get index of input after the current input
nextInput.focus() //focus new input
}
}
Many answers here uses e.keyCode and e.which that are deprecated.
Instead you should use e.key === 'Enter'.
Documentation: https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/keyCode
I'm sorry but I can't test these snippets just now. Will come back later after testing it.
With HTML:
<body onkeypress="if(event.key==='Enter' && event.target.form){focusNextElement(event); return false;}">
With jQuery:
$(window).on('keypress', function (ev)
{
if (ev.key === "Enter" && ev.currentTarget.form) focusNextElement(ev)
}
And with Vanilla JS:
document.addEventListener('keypress', function (ev) {
if (ev.key === "Enter" && ev.currentTarget.form) focusNextElement(ev);
});
You can take focusNextElement() function from here:
https://stackoverflow.com/a/35173443/3356679
Easiest way to solve this problem with the focus function of JavaScript as follows:
You can copy and try it # home!
<!DOCTYPE html>
<html lang="en" dir="ltr">
<head>
<meta charset="utf-8">
<title></title>
</head>
<body>
<input id="input1" type="text" onkeypress="pressEnter()" />
<input id="input2" type="text" onkeypress="pressEnter2()" />
<input id="input3" type="text"/>
<script type="text/javascript">
function pressEnter() {
// Key Code for ENTER = 13
if ((event.keyCode == 13)) {
document.getElementById("input2").focus({preventScroll:false});
}
}
function pressEnter2() {
if ((event.keyCode == 13)) {
document.getElementById("input3").focus({preventScroll:false});
}
}
</script>
</body>
</html>
I had a problem to use enter key instead of Tab in React js .The solution of anjana-silva is working fine and just some small issue for input date and autocomplete as I am using MUI . So I change it a bit and add arrow keys (left/right) as well .
install jquery using npm
npm install jquery --save
write the below in App.js If you want to have this behavior In the whole of your application
import $ from 'jquery';
useEffect(() => {
$('body').on('keydown', 'input, select,button', function (e) {
if (e.keyCode === 13 || e.keyCode === 39) {
var self = $(this), form = self.parents('form:eq(0)'), focusable, next;
focusable = form.find('input,a,select,button,textarea').filter(':visible:not([readonly]):enabled');
next = focusable.eq(focusable.index(this) + 1);
if (next.length) {
next.focus();
}
return false;
}
if (e.keyCode === 37) {
var self = $(this), form = self.parents('form:eq(0)'), focusable, prev;
focusable = form.find('input,a,select,button,textarea').filter(':visible:not([readonly]):enabled');
prev = focusable.eq(focusable.index(this) - 1);
if (prev.length) {
prev.focus();
}
return false;
}
});
}, []);
I had a simular need.
Here is what I did:
<script type="text/javascript" language="javascript">
function convertEnterToTab() {
if(event.keyCode==13) {
event.keyCode = 9;
}
}
document.onkeydown = convertEnterToTab;
</script>
In all that cases, only works in Chrome and IE, I added the following code to solve that:
var key = (window.event) ? e.keyCode : e.which;
and I tested the key value on if keycode equals 13
$('body').on('keydown', 'input, select, textarea', function (e) {
var self = $(this)
, form = self.parents('form:eq(0)')
, focusable
, next
;
var key = (window.event) ? e.keyCode : e.which;
if (key == 13) {
focusable = form.find('input,a,select,button,textarea').filter(':visible');
next = focusable.eq(focusable.index(this) + 1);
if (next.length) {
next.focus();
} else {
focusable.click();
}
return false;
}
});
$("#form input , select , textarea").keypress(function(e){
if(e.keyCode == 13){
var enter_position = $(this).index();
$("#form input , select , textarea").eq(enter_position+1).focus();
}
});
You could programatically iterate the form elements adding the onkeydown handler as you go. This way you can reuse the code.
I have a form with two text boxes, one select drop down and one radio button. When the enter key is pressed, I want to call my JavaScript function, but when I press it, the form is submitted.
How do I prevent the form from being submitted when the enter key is pressed?
if(characterCode == 13) {
// returning false will prevent the event from bubbling up.
return false;
} else{
return true;
}
Ok, so imagine you have the following textbox in a form:
<input id="scriptBox" type="text" onkeypress="return runScript(event)" />
In order to run some "user defined" script from this text box when the enter key is pressed, and not have it submit the form, here is some sample code. Please note that this function doesn't do any error checking and most likely will only work in IE. To do this right you need a more robust solution, but you will get the general idea.
function runScript(e) {
//See notes about 'which' and 'key'
if (e.keyCode == 13) {
var tb = document.getElementById("scriptBox");
eval(tb.value);
return false;
}
}
returning the value of the function will alert the event handler not to bubble the event any further, and will prevent the keypress event from being handled further.
NOTE:
It's been pointed out that keyCode is now deprecated. The next best alternative which has also been deprecated.
Unfortunately the favored standard key, which is widely supported by modern browsers, has some dodgy behavior in IE and Edge. Anything older than IE11 would still need a polyfill.
Furthermore, while the deprecated warning is quite ominous about keyCode and which, removing those would represent a massive breaking change to untold numbers of legacy websites. For that reason, it is unlikely they are going anywhere anytime soon.
Use both event.which and event.keyCode:
function (event) {
if (event.which == 13 || event.keyCode == 13) {
//code to execute here
return false;
}
return true;
};
event.key === "Enter"
More recent and much cleaner: use event.key. No more arbitrary number codes!
NOTE: The old properties (.keyCode and .which) are Deprecated.
const node = document.getElementsByClassName("mySelect")[0];
node.addEventListener("keydown", function(event) {
if (event.key === "Enter") {
event.preventDefault();
// Do more work
}
});
Modern style, with lambda and destructuring
node.addEventListener("keydown", ({key}) => {
if (key === "Enter") // Handle press
})
Mozilla Docs
Supported Browsers
If you're using jQuery:
$('input[type=text]').on('keydown', function(e) {
if (e.which == 13) {
e.preventDefault();
}
});
Detect Enter key pressed on whole document:
$(document).keypress(function (e) {
if (e.which == 13) {
alert('enter key is pressed');
}
});
http://jsfiddle.net/umerqureshi/dcjsa08n/3/
Override the onsubmit action of the form to be a call to your function and add return false after it, ie:
<form onsubmit="javascript:myfunc();return false;" >
A react js solution
handleChange: function(e) {
if (e.key == 'Enter') {
console.log('test');
}
<div>
<Input type="text"
ref = "input"
placeholder="hiya"
onKeyPress={this.handleChange}
/>
</div>
So maybe the best solution to cover as many browsers as possible and be future proof would be
if (event.which === 13 || event.keyCode === 13 || event.key === "Enter")
Here is how you can do it using JavaScript:
//in your **popup.js** file just use this function
var input = document.getElementById("textSearch");
input.addEventListener("keyup", function(event) {
event.preventDefault();
if (event.keyCode === 13) {
alert("yes it works,I'm happy ");
}
});
<!--Let's say this is your html file-->
<!DOCTYPE html>
<html>
<body style="width: 500px">
<input placeholder="Enter the text and press enter" type="text" id="textSearch"/>
<script type="text/javascript" src="public/js/popup.js"></script>
</body>
</html>
Below code will add listener for ENTER key on entire page.
This can be very useful in screens with single Action button eg Login, Register, Submit etc.
<head>
<!--Import jQuery IMPORTANT -->
<script src="https://code.jquery.com/jquery-2.1.1.min.js"></script>
<!--Listen to Enter key event-->
<script type="text/javascript">
$(document).keypress(function (e) {
if (e.which == 13 || event.keyCode == 13) {
alert('enter key is pressed');
}
});
</script>
</head>
Tested on all browsers.
A jQuery solution.
I came here looking for a way to delay the form submission until after the blur event on the text input had been fired.
$(selector).keyup(function(e){
/*
* Delay the enter key form submit till after the hidden
* input is updated.
*/
// No need to do anything if it's not the enter key
// Also only e.which is needed as this is the jQuery event object.
if (e.which !== 13) {
return;
}
// Prevent form submit
e.preventDefault();
// Trigger the blur event.
this.blur();
// Submit the form.
$(e.target).closest('form').submit();
});
Would be nice to get a more general version that fired all the delayed events rather than just the form submit.
A much simpler and effective way from my perspective should be :
function onPress_ENTER()
{
var keyPressed = event.keyCode || event.which;
//if ENTER is pressed
if(keyPressed==13)
{
alert('enter pressed');
keyPressed=null;
}
else
{
return false;
}
}
A little simple
Don't send the form on keypress "Enter":
<form id="form_cdb" onsubmit="return false">
Execute the function on keypress "Enter":
<input type="text" autocomplete="off" onkeypress="if(event.key === 'Enter') my_event()">
Using TypeScript, and avoid multiples calls on the function
let el1= <HTMLInputElement>document.getElementById('searchUser');
el1.onkeypress = SearchListEnter;
function SearchListEnter(event: KeyboardEvent) {
if (event.which !== 13) {
return;
}
// more stuff
}
<div class="nav-search" id="nav-search">
<form class="form-search">
<span class="input-icon">
<input type="text" placeholder="Search ..." class="nav-search-input" id="search_value" autocomplete="off" />
<i class="ace-icon fa fa-search nav-search-icon"></i>
</span>
<input type="button" id="search" value="Search" class="btn btn-xs" style="border-radius: 5px;">
</form>
</div>
<script type="text/javascript">
$("#search_value").on('keydown', function(e) {
if (e.which == 13) {
$("#search").trigger('click');
return false;
}
});
$("#search").on('click',function(){
alert('You press enter');
});
</script>
native js (fetch api)
document.onload = (() => {
alert('ok');
let keyListener = document.querySelector('#searchUser');
//
keyListener.addEventListener('keypress', (e) => {
if(e.keyCode === 13){
let username = e.target.value;
console.log(`username = ${username}`);
fetch(`https://api.github.com/users/${username}`,{
data: {
client_id: 'xxx',
client_secret: 'xxx'
}
})
.then((user)=>{
console.log(`user = ${user}`);
});
fetch(`https://api.github.com/users/${username}/repos`,{
data: {
client_id: 'xxx',
client_secret: 'xxx'
}
})
.then((repos)=>{
console.log(`repos = ${repos}`);
for (let i = 0; i < repos.length; i++) {
console.log(`repos ${i} = ${repos[i]}`);
}
});
}else{
console.log(`e.keyCode = ${e.keyCode}`);
}
});
})();
<input _ngcontent-inf-0="" class="form-control" id="searchUser" placeholder="Github username..." type="text">
<form id="form1" runat="server" onkeypress="return event.keyCode != 13;">
Add this Code In Your HTML Page...it will disable ...Enter Button..
Cross Browser Solution
Some older browsers implemented keydown events in a non-standard way.
KeyBoardEvent.key is the way it is supposed to be implemented in modern browsers.
which
and keyCode are deprecated nowadays, but it doesn't hurt to check for these events nonetheless so that the code works for users that still use older browsers like IE.
The isKeyPressed function checks if the pressed key was enter and event.preventDefault() hinders the form from submitting.
if (isKeyPressed(event, 'Enter', 13)) {
event.preventDefault();
console.log('enter was pressed and is prevented');
}
Minimal working example
JS
function isKeyPressed(event, expectedKey, expectedCode) {
const code = event.which || event.keyCode;
if (expectedKey === event.key || code === expectedCode) {
return true;
}
return false;
}
document.getElementById('myInput').addEventListener('keydown', function(event) {
if (isKeyPressed(event, 'Enter', 13)) {
event.preventDefault();
console.log('enter was pressed and is prevented');
}
});
HTML
<form>
<input id="myInput">
</form>
https://jsfiddle.net/tobiobeck/z13dh5r2/
Use event.preventDefault() inside user defined function
<form onsubmit="userFunction(event)"> ...
function userFunction(ev)
{
if(!event.target.send.checked)
{
console.log('form NOT submit on "Enter" key')
ev.preventDefault();
}
}
Open chrome console> network tab to see
<form onsubmit="userFunction(event)" action="/test.txt">
<input placeholder="type and press Enter" /><br>
<input type="checkbox" name="send" /> submit on enter
</form>
I used document on, which covers dynamically added html after page load:
$(document).on('keydown', '.selector', function (event) {
if (event.which == 13 || event.keyCode == 13) {
//do your thang
}
});
Added updates from #Bradley4