I have a simple AngularJS application with no code related to nodeJS in it. I'm facing problem in removing # from url. I've used ui-routes for routing.
'use strict';
var app = angular.module('myapp', ['ui-router']).
config(['$stateProvider', '$locationProvider', function ($routeProvider, $locationProvider) {
$locationProvider.html5Mode(true);
$stateProvider.
state('home', {
url: '/',
templateUrl: 'views/index.html'
})
.state('where-am-i', {
url: '/where-am-i',
templateUrl: 'views/where_am_i.html',
controller: 'mainCtrl'
})
.state('audience', {
url: '/audience',
templateUrl: 'views/audience.html',
controller: 'mainCtrl'
});
}]);
Also added base tag to the head section of my index.html.
<base href='/' />
Also tried require no base but still not able to get it working.
$locationProvider.html5Mode({
enabled: true,
requireBase: false
});
Adding base tag shows 404 for all the assets I've included in index.html file.
Need a quick and simple solution for this.
Thank you in advance!
add a line after $locationProvider.html5Mode(true); as below:
$locationProvider.hashPrefix('');
hope it works.
Related
I tried to migrate my Angular app from using ngRoute to uiRoute. Everything works fine except the controllers. They simple don't load like they did with ngRoute and I don't get why. As I see it from uiRoute it should work like with ngRoute but it doesn't. There is no exception thrown. I also don't find any example for a similar configuration like mine although it's very simple. I home somebody can tell me where my controller is hiding.
http://plnkr.co/edit/VGyi3AxgslgpvwBCTkXI?p=preview
So as for ngRoute the controller should be accessible through 'homepage' but it looks like it's just empty :(
;(function(angular) {
'use strict';
angular
.module('MainRouter', ['ui.router'])
.config(['$stateProvider', function($stateProvider) {
$stateProvider
.state('home', {
url: '',
views: {
"mainView": {
templateUrl: 'home.html'
}
},
controller: 'HomepageCtrl',
controllerAs: 'homepage'
});
}]);
})(angular);
When you use views option inside the state definition, then ui-router engine doesn't look for templateUrl & controller defined in state level, basically you need to provide controller & templateUrl value from the namedView definition only. In your case you should add controller in mainView definition object.
Code
.config(['$stateProvider', function($stateProvider) {
$stateProvider
.state('home', {
url: '',
views: {
"mainView": {
templateUrl: 'home.html',
controller: 'HomepageCtrl',
controllerAs: 'homepage'
}
},
});
}]);
Demo Plunkr
router working within my Angular JS app. My code is:
Script:
<script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.4.3/angular.min.js"></script>
<script src="bower_components/angular-ui-router/release/angular-ui-router.min.js"></script>
HTML:
<div ui-view></div>
app.js:
var myApp = angular.module('myApp', ['ui-router','mainControl','ui.bootstrap', 'ngSanitize']);
myApp.config(function($stateProvider, $urlRouterProvider) {
$urlRouterProvider.otherwise('/splash');
//
// Now set up the states
$stateProvider
.state('splash', {
url: '/splash',
templateUrl: 'partials/splash2.html',
controller: 'MainControl'
})
.state('advice', {
url: '/advice',
templateUrl: 'partials/advice.html',
controller: 'MainControl'
})
.state('main', {
url: '/main',
templateUrl: 'partials/main.html',
controller: 'MainControl'
})
});
I was has successfully integrated ngRoute into my project, but for some reason the routing was not working in Safari and IE, So this is why I am now trying to integrate the UI-router into my project so that I can successfully get the routing working within my Application.
Any help would be appreciated.
You are having typo, module name should be ui.router instead of ui-router while creating myApp module for your app.
Besides ui.router, you should add the js file for ngSanitize (<script src="angular-sanitize.js">)
I created a project using Yeoman (angular-fullstack). And now I would like to know how the change/set the main view to login.html. So normally when you start the application you first get the main view where you can chose to login or register. What I want is when the application start the page starts direct on the login.html
in your app.js file located at client\app\app.js, in the angular config add the following:
$stateProvider
.run(function ($state) {
$state.go('login');
});
So it should look like:
.config(function ($stateProvider, $urlRouterProvider, $locationProvider, $httpProvider) {
$urlRouterProvider
.otherwise('/');
$locationProvider.html5Mode(true);
$httpProvider.interceptors.push('authInterceptor');
$stateProvider
.run(function ($state) {
$state.go('login');
});
})
I realize this has been out here for a while and you likely already have a good solution, but I was recently looking at this myself and see a couple options.
One, inside app.js you could add the following code snippet under $urlRouterProvider:
.when('/', '/login')
Making your full method be something like:
.config(function ($stateProvider, $urlRouterProvider, $locationProvider, $httpProvider) {
$urlRouterProvider
.when('/', '/login')
$locationProvider.html5Mode(true);
$httpProvider.interceptors.push('authInterceptor');
})
This would force anyone going to your base page url directly to login, unless they provide the full route to another page. However, if you intend to still use the main.html, you will then need to go into client/app/main/main.js and change the default route to:
.state('main', {
url: '/main',
templateUrl: 'app/main/main.html',
controller: 'MainCtrl'
});
So main is reachable by appending /main to the url.
Which brings me to option 2: Go into the main.js file and switch it's url to '/main' and go into login.js and switch it's url to '/'. Then anyone navigating to your base page automatically goes to the login screen but the url is viewed as just your domain without any sub page.
So client/app/main/main.js becomes:
.state('main', {
url: '/main',
templateUrl: 'app/main/main.html',
controller: 'MainCtrl'
});
And client/app/account/account.js now contains:
.state('login', {
url: '/',
templateUrl: 'app/account/login/login.html',
controller: 'LoginCtrl'
})
I'm working on an plugin-based MVC application and I want to use angularjs as route provider. (I'm newbie in angular.) I have specified the necessary information in my app.js and it's working properly for those views, which are in the same project (i.e. /home):
var app = angular.module('app', ['ngRoute']);
app.config(function ($routeProvider) {
$routeProvider
.when('/home', {
templateUrl: 'Home/Index',
controller: 'mainController'
})
.when('/about', {
templateUrl: 'Plugin.App/Home/About',
controller: 'aboutController'
})
.otherwise({
redirectTo: 'Home/SomeLocation'
});
});
app.controller('mainController', mainController);
app.controller('aboutController', aboutController);
But, when I tried to locate any partial view from my plugin, I got 404. Do you have any suggestion to solve this situation?
Thanks for any help in advance!
Craig85
I am trying to start a project with express and angularjs. I was following this guide.
On first go i.e running localhost:3000, I am loading my index.jade file inside views directory successfully.
index.jade
extends layout
block content
div
ng-view
include footerjs
footerjs.jade
script(src="/javascripts/angular.min.js")
script(src="/javascripts/angular-route.js")
script(src="/javascripts/angular-resource.js")
script(src="/javascripts/app.js")
script(src="/javascripts/task.js")
views directory has a folder called partials. inside this folder I have added two templates. "task.jade" and "landing.jade".
my app.js
var mainApp = angular.module('mainApp', ['ngRoute', 'taskApp', "ngResource", 'ui.router' ]);
mainApp.config(['$routeProvider', '$locationProvider',function(routeProvider, locationProvider) {
locationProvider.html5Mode(true);
routeProvider
.when('/', {
templateUrl: 'partials/landing',
controller: 'taskController'
}).
when('/task', {
templateUrl: 'partials/task',
controller: 'taskController'
}).
otherwise({redirectTo: '/'});
}]);
and I have made an express route as:
router.get('/partials/:urlName', function(req, res) {
res.render('partials/'+req.params.urlName);
});
I am not able to route any partials. I am stuck at my layout at initial and an error 404 on trying to route /task. any help would be greatly appreciated.
You should include the file extension in templateUrl:
routeProvider
.when('/', {
templateUrl: 'partials/landing.jade',
controller: 'taskController'
}).
when('/task', {
templateUrl: 'partials/task.jade',
controller: 'taskController'
}).
otherwise({redirectTo: '/'});