i'm really new to AngularJS and i like it very much.
But i'm experiencing a problem trying to initialize a prealoaded dropdown with a specific value.
The dropdown is initialized with values available from JSON array, but when i try to select a default value in this dropdown, i don't see that value selected but the ng-model variable is set correctly.
I created a plunker example here http://plnkr.co/edit/7su3Etr1JNYEz324CMy7?p=preview tryng to achieve what i want, but i can't get it to work. I tried with ng-repeat and ng-select, with no luck. Another try i did (in this example) is trying to set the ng-selected property.
This is a part of my html
<body ng-controller="MySampleController">
<select name="repeatSelect" id="repeatSelect" ng-model="SelectedStatus" ng-init="SelectedStatus">
<option ng-repeat="option in StatusList[0]" value="{{option.key}}" ng-selected="{{option.key==SelectedStatus}}">{{option.name}}</option>
</select>
<select name="repeatSelect" id="repeatSelect" ng-model="SelectedOrigin">
<option ng-repeat="option in OriginList[0]" value="{{option.key}}" ng-selected="{{option.key == SelectedOrigin}}">{{option.key}} - {{option.name}}</option>
</select>
<pre>Selected Value For Status: {{SelectedStatus}}</pre>
<pre>{{StatusList[0]}}</pre>
<pre>Selected Value For Origin: {{SelectedOrigin}}</pre>
<pre>{{OriginList[0]}}</pre>
</body>
And this is code from my controller
function MySampleController($scope) {
$scope.StatusList = [];
$scope.OriginList = [];
$scope.ServiceCall = {};
$scope.EntityList = [];
$scope.SelectedStatus = -3;
$scope.SelectedOrigin = 1;
var myList = [
{
item: 'Status',
values: [{ key: -3, name: 'Aperto' },
{ key: -1, name: 'Chiuso' }]
},
{
item: 'Origin',
values: [{ key: 1, name: 'Origin1' },
{ key: 2, name: 'Origin2' },
{ key: 3, name: 'Origin3' }]
}
];
$scope.documentsData = myList;
angular.forEach($scope.documentsData, function (value) {
$scope.EntityList.push(value);
switch ($scope.EntityList[0].item) {
case 'Status':
$scope.StatusList.push($scope.EntityList[0].values);
$scope.EntityList = [];
break;
case 'Origin':
$scope.OriginList.push($scope.EntityList[0].values);
$scope.EntityList = [];
break;
}
});
}
Any help would be appreciated!
Thanks in advance.
You can at least use ng-options instead of ng-repeat + option, in which case the default value works just fine.
<select name="repeatSelect" id="repeatSelect"
ng-options="opt.key as opt.key+'-'+opt.name for opt in StatusList[0]"
ng-model="SelectedStatus"></select>`
You can also make it a bit more readable by specifying the option label as a scope function.
HTML: ng-options="opt.key as getOptionLabel(opt) for opt in StatusList[0]"
Controller:
$scope.getOptionLabel = function(option) {
return option.key + " - " + option.name;
}
Plunker: http://plnkr.co/edit/7BcAuzX5JV7lCQh772oo?p=preview
Value of a select directive used without ngOptions is always a string.
Set as following and it would work
$scope.SelectedStatus = '-3';
$scope.SelectedOrigin = '1';
Read answer here in details ng-selected does not work with ng-repeat to set default value
When I bind the select elements to ng-model family, which refers to an element of font.families array, Angular doesn't bind what is selected. The array stays empty, with just the first null element.
But when I bind the select elements to font.families[$index], the binding is effective.
// Javascript
$scope.font.families = [null]; // Used to create an empty first line in the form
$scope.families = [
{ name: "Foo", parent: "Bar" },
{ name: "Doo", parent: "Dar" }
];
$scope.mainFamilies = [
{ name: "Bar", children: ["Foo", "Baz"] },
{ name: "Dar", children: ["Doo", "Hoo"] }
];
<!-- HTML -->
Font families : {{ font.families }}
<div ng-repeat="family in font.families track by $index">
Family : {{ family }}
<ng-form name="familyRow">
<select ng-options="fam as fam.name group by fam.parent for fam in families"
ng-model="font.families[$index]"
name="family">
<option disabled value="">—</option>
</select>
<select ng-options="mainFam.name as mainFam.name for mainFam in mainFamilies"
ng-model="font.families[$index].parent"
name="mainFamily">
<option disabled value="">—</option>
</select>
</div>
Plunker to illustrate the problem.
How comes?
Here's my understanding of the issue:
Case 1 (Working): You're using ng-model="model.families[$index]". In this case when you make a selection here's what happens:
model.families[0] -> Your selection
Case 2 (Not working): You're using ng-model="family". In this case this is what is happening:
family -> model.families[0] -> null
When you make the selection:
family -> new selection
model.families[0] -> null
The problem is that in 2nd case, the assignment causes the family variable to be assigned a new value altogether and the source array remains the same.
You can further verify this by adding these statements in your html:
family: {{family}}
model.families: {{model.families[$index]}}
Are they equal?: {{familly === model.families[$index]}}
I'm trying to achieve a cascade dropdown in Angular. I thought it would just work naturally thanks to binding. See below:
<select name="client" ng-model="selectedRequest.client" ng-options="c.name for c in clients track by c.id" required></select>
<select id="department" ng-model="selectedRequest.department" ng-options="d.defaultLabel for d in selectedRequest.client.departments track by d.id"></select>
When the view is loaded, it works, I can see the departments matching those bound to the client. However, whenever the selectedRequest.client changes, the source for the department dropdown should change too, but instead it becomes empty.
EDIT
I've changed the child dropdown to :
<select id="department" ng-model="selectedRequest.department" ng-options="d.defaultLabel for d in departments track by d.id | filter:{clientId: selectedRequest.client.id}"></select>
but this time it loads all the departments in the dropdown, ignoring the filter.
** EDIT 2 **
Changing to :
<select name="client" ng-model="requestService.selectedRequest.client" ng-options="c as c.name for c in clients track by c.id" required></select>
<select id="department" ng-model="requestService.selectedRequest.department" ng-options="d.defaultLabel for d in departments | filter:{clientId: requestService.selectedRequest.client.id}"></select>
Now the source changes correctly when a client is selected. However the initial selection, i.e setting the right department at startup, does not work. That's because I've removed the 'track by id' bit.
the correct way was
<select id="department" ng-model="selectedRequest.department" ng-options="d.defaultLabel for d in departments | filter:{clientId: selectedRequest.client.id} track by d.id "></select>
it's just that I hadn't put the filter at the right place... silly mistake.
It could be that your selectedRequest.client does not refer to the same object in clients array. Try this:
JS:
function testController($scope) {
$scope.clients = [
{ id: 1, name: "client1", departments: [{ id: 1, defaultLabel: 'department1' }, { id: 2, defaultLabel: 'department2'}] },
{ id: 2, name: "client2", departments: [{ id: 3, defaultLabel: 'department3' }, { id: 4, defaultLabel: 'department4'}] }
];
$scope.selectedRequest = {};
$scope.selectedRequest.client = $scope.clients[0];//Assign by object reference.
}
HTML:
<div ng-controller="testController">
<select name="client" ng-model="selectedRequest.client" ng-options="c.name for c in clients" required></select>
<select id="department" ng-model="selectedRequest.department" ng-options="d.defaultLabel for d in selectedRequest.client.departments"></select>
</div>
DEMO
I removed track by to use the default (track by object reference) and ensure that selectedRequest.client refers to objects inside clients
I have searched Google and can't find anything on this.
I have this code.
<select ng-model="somethingHere"
ng-options="option.value as option.name for option in options"
></select>
With some data like this
options = [{
name: 'Something Cool',
value: 'something-cool-value'
}, {
name: 'Something Else',
value: 'something-else-value'
}];
And the output is something like this.
<select ng-model="somethingHere"
ng-options="option.value as option.name for option in options"
class="ng-pristine ng-valid">
<option value="?" selected="selected"></option>
<option value="0">Something Cool</option>
<option value="1">Something Else</option>
</select>
How is it possible to set the first option in the data as the default value so you would get a result like this.
<select ng-model="somethingHere" ....>
<option value="0" selected="selected">Something Cool</option>
<option value="1">Something Else</option>
</select>
You can simply use ng-init like this
<select ng-init="somethingHere = options[0]"
ng-model="somethingHere"
ng-options="option.name for option in options">
</select>
If you want to make sure your $scope.somethingHere value doesn't get overwritten when your view initializes, you'll want to coalesce (somethingHere = somethingHere || options[0].value) the value in your ng-init like so:
<select ng-model="somethingHere"
ng-init="somethingHere = somethingHere || options[0].value"
ng-options="option.value as option.name for option in options">
</select>
Try this:
HTML
<select
ng-model="selectedOption"
ng-options="option.name for option in options">
</select>
Javascript
function Ctrl($scope) {
$scope.options = [
{
name: 'Something Cool',
value: 'something-cool-value'
},
{
name: 'Something Else',
value: 'something-else-value'
}
];
$scope.selectedOption = $scope.options[0];
}
Plunker here.
If you really want to set the value that will be bound to the model, then change the ng-options attribute to
ng-options="option.value as option.name for option in options"
and the Javascript to
...
$scope.selectedOption = $scope.options[0].value;
Another Plunker here considering the above.
Only one answer by Srivathsa Harish Venkataramana mentioned track by which is indeed a solution for this!
Here is an example along with Plunker (link below) of how to use track by in select ng-options:
<select ng-model="selectedCity"
ng-options="city as city.name for city in cities track by city.id">
<option value="">-- Select City --</option>
</select>
If selectedCity is defined on angular scope, and it has id property with the same value as any id of any city on the cities list, it'll be auto selected on load.
Here is Plunker for this:
http://plnkr.co/edit/1EVs7R20pCffewrG0EmI?p=preview
See source documentation for more details:
https://code.angularjs.org/1.3.15/docs/api/ng/directive/select
I think, after the inclusion of 'track by', you can use it in ng-options to get what you wanted, like the following
<select ng-model="somethingHere" ng-options="option.name for option in options track by option.value" ></select>
This way of doing it is better because when you want to replace the list of strings with list of objects you will just change this to
<select ng-model="somethingHere" ng-options="object.name for option in options track by object.id" ></select>
where somethingHere is an object with the properties name and id, of course. Please note, 'as' is not used in this way of expressing the ng-options, because it will only set the value and you will not be able to change it when you are using track by
The accepted answer use ng-init, but document says to avoid ng-init if possible.
The only appropriate use of ngInit is for aliasing special properties
of ngRepeat, as seen in the demo below. Besides this case, you should
use controllers rather than ngInit to initialize values on a scope.
You also can use ng-repeat instead of ng-options for your options. With ng-repeat, you can use ng-selected with ng-repeat special properties. i.e. $index, $odd, $even to make this work without any coding.
$first is one of the ng-repeat special properties.
<select ng-model="foo">
<option ng-selected="$first" ng-repeat="(id,value) in myOptions" value="{{id}}">
{{value}}
</option>
</select>
---------------------- EDIT ----------------
Although this works, I would prefer #mik-t's answer when you know what value to select, https://stackoverflow.com/a/29564802/454252, which uses track-by and ng-options without using ng-init or ng-repeat.
This answer should only be used when you must select the first item without knowing what value to choose. e.g., I am using this for auto completion which requires to choose the FIRST item all the time.
My solution to this was use html to hardcode my default option. Like so:
In HAML:
%select{'ng-model' => 'province', 'ng-options' => "province as province for province in summary.provinces", 'chosen' => "chosen-select", 'data-placeholder' => "BC & ON"}
%option{:value => "", :selected => "selected"}
BC & ON
In HTML:
<select ng-model="province" ng-options="province as province for province in summary.provinces" chosen="chosen-select" data-placeholder="BC & ON">
<option value="" selected="selected">BC & ON</option>
</select>
I want my default option to return all values from my api, that's why I have a blank value. Also excuse my haml. I know this isn't directly an answer to the OP's question, but people find this on Google. Hope this helps someone else.
Use below code to populate selected option from your model.
<select id="roomForListing" ng-model="selectedRoom.roomName" >
<option ng-repeat="room in roomList" title="{{room.roomName}}" ng-selected="{{room.roomName == selectedRoom.roomName}}" value="{{room.roomName}}">{{room.roomName}}</option>
</select>
Depending on how many options you have, you could put your values in an array and auto-populate your options like this
<select ng-model="somethingHere.values" ng-options="values for values in [5,4,3,2,1]">
<option value="">Pick a Number</option>
</select>
In my case, I was need to insert a initial value only to tell to user to select an option, so, I do like the code below:
<select ...
<option value="" ng-selected="selected">Select one option</option>
</select>
When I tryed an option with the value != of an empty string (null) the option was substituted by angular, but, when put an option like that (with null value), the select apear with this option.
Sorry by my bad english and I hope that I help in something with this.
Using select with ngOptions and setting a default value:
See the ngOptions documentation for more ngOptions usage examples.
angular.module('defaultValueSelect', [])
.controller('ExampleController', ['$scope', function($scope) {
$scope.data = {
availableOptions: [
{id: '1', name: 'Option A'},
{id: '2', name: 'Option B'},
{id: '3', name: 'Option C'}
],
selectedOption: {id: '2', name: 'Option B'} //This sets the default value of the select in the ui
};
}]);
<script src="//ajax.googleapis.com/ajax/libs/angularjs/1.5.0-rc.0/angular.min.js"></script>
<body ng-app="defaultValueSelect">
<div ng-controller="ExampleController">
<form name="myForm">
<label for="mySelect">Make a choice:</label>
<select name="mySelect" id="mySelect"
ng-options="option.name for option in data.availableOptions track by option.id"
ng-model="data.selectedOption"></select>
</form>
<hr>
<tt>option = {{data.selectedOption}}</tt><br/>
</div>
plnkr.co
Official documentation about HTML SELECT element with angular data-binding.
Binding select to a non-string value via ngModel parsing / formatting:
(function(angular) {
'use strict';
angular.module('nonStringSelect', [])
.run(function($rootScope) {
$rootScope.model = { id: 2 };
})
.directive('convertToNumber', function() {
return {
require: 'ngModel',
link: function(scope, element, attrs, ngModel) {
ngModel.$parsers.push(function(val) {
return parseInt(val, 10);
});
ngModel.$formatters.push(function(val) {
return '' + val;
});
}
};
});
})(window.angular);
<script src="//ajax.googleapis.com/ajax/libs/angularjs/1.5.0-rc.1/angular.min.js"></script>
<body ng-app="nonStringSelect">
<select ng-model="model.id" convert-to-number>
<option value="1">One</option>
<option value="2">Two</option>
<option value="3">Three</option>
</select>
{{ model }}
</body>
plnkr.co
Other example:
angular.module('defaultValueSelect', [])
.controller('ExampleController', ['$scope', function($scope) {
$scope.availableOptions = [
{ name: 'Apple', value: 'apple' },
{ name: 'Banana', value: 'banana' },
{ name: 'Kiwi', value: 'kiwi' }
];
$scope.data = {selectedOption : $scope.availableOptions[1].value};
}]);
<script src="//ajax.googleapis.com/ajax/libs/angularjs/1.5.0-rc.0/angular.min.js"></script>
<body ng-app="defaultValueSelect">
<div ng-controller="ExampleController">
<form name="myForm">
<select ng-model="data.selectedOption" required ng-options="option.value as option.name for option in availableOptions"></select>
</form>
</div>
</body>
jsfiddle
This worked for me.
<select ng-model="somethingHere" ng-init="somethingHere='Cool'">
<option value="Cool">Something Cool</option>
<option value="Else">Something Else</option>
</select>
In response to Ben Lesh's answer, there should be this line
ng-init="somethingHere = somethingHere || options[0]"
instead of
ng-init="somethingHere = somethingHere || options[0].value"
That is,
<select ng-model="somethingHere"
ng-init="somethingHere = somethingHere || options[0]"
ng-options="option.name for option in options track by option.value">
</select>
In my case since the default varies from case to case in the form.
I add a custom attribute in the select tag.
<select setSeletected="{{data.value}}">
<option value="value1"> value1....
<option value="value2"> value2....
......
in the directives I created a script that checks the value and when angular fills it in sets the option with that value to selected.
.directive('setSelected', function(){
restrict: 'A',
link: (scope, element, attrs){
function setSel=(){
//test if the value is defined if not try again if so run the command
if (typeof attrs.setSelected=='undefined'){
window.setTimeout( function(){setSel()},300)
}else{
element.find('[value="'+attrs.setSelected+'"]').prop('selected',true);
}
}
}
setSel()
})
just translated this from coffescript on the fly at least the jist of it is correct if not the hole thing.
It's not the simplest way but get it done when the value varies
Simply use ng-selected="true" as follows:
<select ng-model="myModel">
<option value="a" ng-selected="true">A</option>
<option value="b">B</option>
</select>
This working for me
ng-selected="true"
I would set the model in the controller. Then the select will default to that value. Ex:
html:
<select ng-options="..." ng-model="selectedItem">
Angular controller (using resource):
myResource.items(function(items){
$scope.items=items;
if(items.length>0){
$scope.selectedItem= items[0];
//if you want the first. Could be from config whatever
}
});
If you are using ng-options to render you drop down than option having same value as of ng-modal is default selected.
Consider the example:
<select ng-options="list.key as list.name for list in lists track by list.id" ng-model="selectedItem">
So option having same value of list.key and selectedItem, is default selected.
I needed the default “Please Select” to be unselectable. I also needed to be able to conditionally set a default selected option.
I achieved this the following simplistic way:
JS code:
// Flip these 2 to test selected default or no default with default “Please Select” text
//$scope.defaultOption = 0;
$scope.defaultOption = { key: '3', value: 'Option 3' };
$scope.options = [
{ key: '1', value: 'Option 1' },
{ key: '2', value: 'Option 2' },
{ key: '3', value: 'Option 3' },
{ key: '4', value: 'Option 4' }
];
getOptions();
function getOptions(){
if ($scope.defaultOption != 0)
{ $scope.options.selectedOption = $scope.defaultOption; }
}
HTML:
<select name="OptionSelect" id="OptionSelect" ng-model="options.selectedOption" ng-options="item.value for item in options track by item.key">
<option value="" disabled selected style="display: none;"> -- Please Select -- </option>
</select>
<h1>You selected: {{options.selectedOption.key}}</h1>
I hope this helps someone else that has similar requirements.
The "Please Select" was accomplished through Joffrey Outtier's answer here.
If you have some thing instead of just init the date part, you can use ng-init() by declare it in your controller, and use it in the top of your HTML.
This function will work like a constructor for your controller, and you can initiate your variables there.
angular.module('myApp', [])
.controller('myController', ['$scope', ($scope) => {
$scope.allOptions = [
{ name: 'Apple', value: 'apple' },
{ name: 'Banana', value: 'banana' }
];
$scope.myInit = () => {
$scope.userSelected = 'apple'
// Other initiations can goes here..
}
}]);
<body ng-app="myApp">
<div ng-controller="myController" ng-init="init()">
<select ng-model="userSelected" ng-options="option.value as option.name for option in allOptions"></select>
</div>
</body>
<!--
Using following solution you can set initial
default value at controller as well as after change option selected value shown as default.
-->
<script type="text/javascript">
function myCtrl($scope)
{
//...
$scope.myModel=Initial Default Value; //set default value as required
//..
}
</script>
<select ng-model="myModel"
ng-init="myModel= myModel"
ng-options="option.value as option.name for option in options">
</select>
try this in your angular controller...
$somethingHere = {name: 'Something Cool'};
You can set a value, but you are using a complex type and the angular will search key/value to set in your view.
And, if does not work, try this :
ng-options="option.value as option.name for option in options track by option.name"
I think the easiest way is
ng-selected="$first"