I am working on setting up a scenario as following:
1) User is shown existing results on first grid
2) User can select multiple results and click an 'Edit' button which will extract the selected items from the first grid
3)Second grid will be populated with the rows the user has selected from the first grid and will allow them to make edits to the content
4)Pressing save will update the results and show the first grid with the rows updated
So far using drips and drabs of various forum threads (here and here), I have managed to accomplish the first two steps.
$("#editButton").kendoButton({
click: function () {
// extract selected results from the grid and send along with transition
var gridResults = $("#resultGrid").data("kendoGrid"); // sourceGrid
var gridConfig = $("#resultConfigGrid").data("kendoGrid"); // destinationGrid
gridResults.select().each(function () {
var dataItem = gridResults.dataItem($(this));
gridConfig.dataSource.add(dataItem);
});
gridConfig.refresh();
transitionToConfigGrid();
}
});
dataItem returns what i am expecting to see with regards to the selected item(s) - attached dataItem.png. I can see the gridConfig populating but with blank rows (gridBlankRows.png).
gridConfig setup:
$(document).ready(function () {
// build the custom column schema based on the number of lots - this can vary
var columnSchema = [];
columnSchema.push({ title: 'Date Time'});
for(var i = 0; i < $("#maxNumLots").data("value"); ++i)
{
columnSchema.push({
title: 'Lot ' + i,
columns: [{
title: 'Count'
}, {
title: 'Mean'
}, {
title: 'SD'
}]
});
}
columnSchema.push({ title: 'Comment'});
columnSchema.push({ title: 'Review Comment' });
// build the datasource with CU operations
var configDataSource = new kendo.data.DataSource({
transport: {
create: function(options) {},
update: function(options) {}
}
});
$("#resultConfigGrid").kendoGrid({
columns: columnSchema,
editable: true
});
});
I have run out of useful reference material to identify what I am doing wrong / what could be outstanding here. Any help/guidance would be greatly appreciated.
Furthermore, I will also need functionality to 'Add New' results. If possible I would like to use the same grid (with a blank datasource) in order to accomplish this. The user can then add rows to the second grid and save with similar functionality to the update functionality. So if there is any way to factor this into the response, I would appreciate it.
The following example...
http://dojo.telerik.com/EkiVO
...is a modified version of...
http://docs.telerik.com/kendo-ui/framework/datasource/crud#examples
A couple of notes:
it matters if you are adding plain objects to the second Grid's dataSource (gridConfig.dataSource.add(dataItem).toJSON();), or Kendo UI Model objects (gridConfig.dataSource.add(dataItem);). In the first case, you will need to pass back the updated values from Grid2 to Grid1, otherwise this will occur automatically;
there is no need to refresh() the second Grid after adding, removing or changing its data items
both Grid dataSources must be configured for CRUD operations, you can follow the CRUD documentation
the Grid does not persist its selection across rebinds, so if you want to preserve the selection in the first Grid after some values have been changed, use the approach described at Persist Row Selection
Related
I have the ExtJs form combo which shows the values in the dropdown as checkbox and the value to select. I have used the pagination to list all the values with no of pages. I need the selected value to be retained in the current page even when we move to next or previous page and comes back to the same page(without selecting any thing in prev, next pages).
Code:
Ext.create('Ext.form.ComboBox', {
id: 'ageComboPickerReport',
name: 'ageComboPickerReport',
maxHeight: 150,
margin: '0 5 0 0',
width: 150,
emptyText: "Select tags",
listConfig: {
getInnerTpl: function (displayField) {
return '<div class="x-combo-list-item"><img src="" class="chkCombo-default-icon
chkCombo" /> {' + displayField + '}</div>';
},
autoEl: { 'q-name': 'rpt-age-criteria-list'
}, labelAlign: 'top',
pageSize: 25,
displayField: 'age', valueField: 'id', forceSelection: true, store: me.ageStore,
//Disable Typing and Open Combo
onFocus: function () {
if (!this.isExpanded) {
me.ageStore.load()
this.expand()
} this.getPicker().focus();
}
}),
Could any one tell me how to retain the selected value in the page when move to other page and comes back
I faced a very similar issue, in my case I had a grid with checkbox selection model, and I wanted to retain the selected rows during moving between pages. I am quite sure (although not 100%) that there is no built-in functionality for that in ExtJS. I can tell what I did, hope it helps, although you have to adopt it because it is not for ComboBox, but for Grid.
Since this is a paged store, not all of the records are loaded, only the ones that are currently on the displayed page. (I assume your store is remote because I see you call load on it.) So to achieve what you like, you need to:
keep track of the selected record ids to be able the reset selection on page,
keep track the items (records) themselves as well, since you will likely need them,
after a page is loaded and displayed, set the selection accordingly.
(This solution can have issues, so you need to be careful. Depending on the use case, it is possible for example that the user selects something, goes to another page and come back, but the previously selected row is no more available (it was deleted by someone else). You have to consider whether it affects you.)
The complete code is complicated and not general enough to share it, but I can outline the steps I did:
Set up two data entries in viewmodel to track the selected record ids and items (records):
data: {
multiSelection: {
ids: {},
items: [],
},
}
Add listeners to the grid's select and deselect events in the view:
listeners: {
select: 'onGridSelect',
deselect: 'onGridDeselect',
},
Create onGridSelect and onGridDeselect functions in the controller, and also add a isDataChanged variable to the controller to indicate whether the store was changed (it is changed on each paging). It is important because I will programatically change the selection, and I don't want my listeners to be executed in this case, only when the user interacts. Like this:
isDataChanged: false,
onGridSelect: function(selModel, record, index, eOpts) {
if (isDataChanged) {
return;
}
const viewModel = this.getViewModel(),
multiSelection = viewModel.get('multiSelection');
multiSelection.ids[record.getId()] = true;
Ext.Array.push(multiSelection.items, record);
},
onGridDeselect: function(selModel, record, index, eOpts) {
if (isDataChanged) {
return;
}
const viewModel = this.getViewModel(),
multiSelection = viewModel.get('multiSelection');
delete multiSelection.ids[record.getId()];
Ext.Array.remove(multiSelection.items, record);
},
Finally, add a listeners to the store to detect changes, this will be called every time the user moves between pages. This is a little tricky, because I need to access the grid from the store listeners which is not very ExtJS like, but I had to (store needs to be the grid's store:
store.on('datachanged', function(store, eOpts) {
// this part you have to figure out, my solution is way too specific
// for share
const grid = ...;
// this was important for me, if the store is really changed,
// deleted, added rows etc., I deleted the selection, but
// you can consider it
if (store.getUpdatedRecords().length > 0 ||
store.getRemovedRecords().length > 0 ||
store.getNewRecords().length > 0) {
// access the `viewmodel` and reset `multiSelection` data entries to
// default, I `return` here to skip the rest
return;
}
// disable listener
grid.getController().isDataChanged = true;
const selModel = grid.getSelectionModel(),
multiSelection = grid.getViewModel().get('multiSelection');
// deselect everything
selModel.deselectAll();
// get an array of the saved selection and find out, which
// record from the current page is in the saved multiSelection
const selected = [];
Ext.Array.each(grid.getStore().getRange(), function(record) {
if (multiSelection.ids[record.getId()]) {
Ext.Array.push(selected, record);
}
});
// apply selection to current page
selModel.select(selected);
// enable listener
grid.getController().isDataChanged = false;
}
I'm trying to add a new empty line in ui-grid. I've tried looking in different tuto and example, but all that I found didn't reply to my spec, and I wasn't able to adapt it to what I'm looking for.
In fact I'm looking how to add a new empty line in an existing ui-grid neither using a button outside the grid nor a button in the rowfooter.
I'm looking to add a abutton in the grid like the + button shown in the screen shot below
or may be render automatically a new empty line when the rendering the ui-grid and a new one when all rows were filled.
I tried doing that using function in cell template but it's not working.
any help is really appreciated
The first option sounds like more of a CSS issue to me. Essentially, the add button would use some sort of font library containing a +, and you would need to position it in the corner of the grid. Perhaps looking at the grid footer would be a starting place. It sounds like you've seen the basics of creating an add row button here: http://ui-grid.info/docs/#/tutorial/112_swapping_data
The second option (render automatically a new empty line when the rendering the ui-grid and a new one when all rows were filled) requires a JavaScript approach.
The basic logic I followed is:
(Assume) Some data loads from somewhere in a backend (in this sample, it's a simulated load returning a promise as $http or $resource would).
After that data is loaded, we append a new row. We wait for the data first; otherwise we'd not be pushing the new row to the correct location.
Upon completion of the edit action, we set a timeout to ensure subsequent edits on other cells do not keep firing a new row. If the timeout is reached, we append a new row. If a subsequent edit action occurs, and a timeout promise exists (for adding a new row), we cancel it. Once no edit actions occur, and the timeout is reached, we push the new row.
To ensure that we are only taking action when our "extra row" is modified, when we create a row, a reference is maintained to the current row such that we can evaluate whether or not a received event is of interest (var newRowTimeoutPromise).
The core logic in code is below, with a sample implementation in Plnkr:
var extraRow = null,
addNewTimeoutMillis = 2000,
newRowTimeoutPromise = null;
loadData().then(function(data) {
$scope.gridOpts.data = data;
}).finally(function() {
// add initial empty row, and set our reference to it
extraRow = addEmptyRow($scope.gridOpts.data);
})
$scope.gridOpts = {
showGridFooter: true,
onRegisterApi: function(gridApi) {
$scope.gridApi = gridApi;
// listen for cell edit completion
gridApi.edit.on.afterCellEdit($scope, function(rowEntity, colDef, newValue, oldValue) {
// test if the edited row was the "extra row"
// otherwise, and edit to any row would fire a new row
// Set a timeout so we don't create a new row if the user has
// not finished their edit(s) on other fields
newRowTimeoutPromise = $timeout(function() {
if (rowEntity == extraRow) {
// add a new empty row, and set our reference to it
extraRow = addEmptyRow($scope.gridOpts.data);
newRowTimeoutPromise = null;
}
}, addNewTimeoutMillis);
})
// Listen for cell edit start, and cancel if we have a pending new
// row add. Otherwise, each time you finish the edit on a cell,
// this will fire.
gridApi.edit.on.beginCellEdit($scope, function(rowEntity, colDef, newValue, oldValue) {
if (newRowTimeoutPromise != null) {
$timeout.cancel(newRowTimeoutPromise);
}
})
}
};
http://plnkr.co/edit/IMisQEHlaZDCmCSpmnMZ?p=preview
I used jQuery to fetch and change style of specific cell elements of the cell template.
Here is a helpful Fiddle
Here is the controller script : -
var app = angular.module('app', ['ngTouch', 'ui.grid']);
app.controller('MainCtrl', ['$scope',
function($scope) {
$scope.gridOptions = {};
$scope.Add = function() {
$scope.gridOptions.data.push( { firstName: ' ',lastName:'',company:'' });
$(".ui-grid-coluiGrid").prevObject["0"].activeElement.style.display="none";
$(".ui-grid-cell")[$scope.gridOptions.data.length-2].style.display="inline";
};
$scope.gridOptions.onRegisterApi = registerGridApi;
function registerGridApi(gridApi) {
$scope.gridApi= gridApi
};
$scope.gridOptions.columnDefs = [{
name: 'firstName',
field: 'firstName',
}, {
name: 'lastNamer',
field: 'firstName'
}, {
name: 'ShowScope',
cellTemplate: '<button id="btb" ng-click="grid.appScope.Add()">+</button>'
}];
$scope.gridOptions.data = [{ yourdata}];
}
]);
To make it work properly 2 more things have to be done
Use cellContentEditable to make the rows editable
In order to disable display style of cell template button that appears on cells corresponding to rows of already existing data,you could use angular foreach or a for loop to iterate through these rows and disable style(I tried using renderContainers but it always returns the length of rendered rows outside Add functions as 0).
I have a working plunker over here.
http://plnkr.co/edit/Vnn4K5DcCdiercc22Vry?p=preview
In columnDefs, I have defined a separate column for add:
{
name: 'add',
displayName: '',
enableCellEdit: false,
enableColumnMenu: false,
width: '3%',
cellTemplate: '<div class="ui-grid-cell-contents" ng-click="grid.appScope.addRow()"><span ng-click="grid.appScope.addRow()">Add</span></div>'
}
And
$scope.addRow= function(){
var newlist = {"remarks":'',"testName":''};
$scope.gridOptions.data.push(newlist);
}
Update: A second plunker with bootstrap icons for add/remove
http://plnkr.co/edit/FjsA2r?p=preview
I have two kendo grids (A, B) ...B its loaded by clicking in A and the its data source its loaded by a property of selected row in A ..
A.accounts
dataSource: {
data: this.gridA.dataItem(this.gridA.select()),
},
My problem its that in B I have to change a property using the grid, but when the property its changed the grid its reloaded and if i have 1000 rows when I change the property in the grid (anyrow, 999 i.e), the scroll back to the beginning
...I have read and try to understand it, but a can't fix it... according to the official documentation, the row selected by
var row = this.gridApprovals.select();
var caBean = this.gridApprovals.dataItem(row);
Its a ObservableObject, so, when I try to change a property, some method (of ObservableOject) it's making this behaviour, and the grid its reloaded, its iterating every data source item...
EDITED:
I forgot to mention.. its important keep the relation between the changes of the B grid and its relation in A slection..
Here is a Dojo Project http://dojo.telerik.com/uYemI/2
How about this?
http://dojo.telerik.com/#Stephen/aNije
I removed the k-rebind attribute and instead wire up the dataSource inside your setCarsGrid() method:
$scope.setCarsGrid = function() {
var row = this.brandGrid.select();
var brand = this.brandGrid.dataItem(row);
var brandObj=brand.toJSON();
var dataSource = new kendo.data.DataSource({
data: brand.cars,
schema:{
model:{
fields:{
id:{editable:false},
model:{editable:false},
color:{type:"string"}
}
},
parse: function(response) {
$.each(response, function(idx, elem) {
elem.id = elem.id+10;
//if you put a break point here, every time you try to edit 'color' field.. will be stop because datasourse is iterated again
console.log("Grid has been reloaded and the editable field 'color' can be edited :'( the id property has been added +10")
});
return response;
}
}
});
// This first time this is called, the carsGrid has not been initialized, so it doesn't exist.
// But subsequent times, we just need to set the new datasource.
if (this.carsGrid) {
this.carsGrid.setDataSource(dataSource);
}
$scope.carsGridOptions = {
dataSource: dataSource,
selectable:true,
editable: true,
columns: [{
field: "id",
},{
field: "model",
},{
field: "color",
}]
};
}
Essentially, I am just separating initialization of the GRID from the setting of the grid's DATASOURCE.
The first time through, you set up the grid options AND set the dataSource and then subsequent times through, we just set the grid to the new dataSource.
This avoids the k-rebind behaviour...which I believe is documented: http://docs.telerik.com/kendo-ui/AngularJS/introduction#widget-update-upon-option-changes
This approach is not suitable for dataBound widgets because those widgets are recreated on each change of their data—for example, after paging of the Grid.
Note, I don't really know angular so there may be a better way to organize this code, but it works.
I have an ExtJS grid that has a PagingToolbar for (remote) paging, and a checkbox column defined as:
{
dataIndex : 'selected',
xtype: 'checkcolumn',
width : 60
}
However, if I check a box and then page forwards and backwards, the checkbox state is not saved - all the checkboxes are unchecked.
I guess since the store only contains data for the current page (from the server), I need some way of storing the state for rows that are not in the current page of data, and then reinstating the checkboxes when I return to that page.
Is there a best practice, or example of storing the checkbox state in the store while paging?
Well, that's so low-level work that no one has yet thought to make a "best practice" for it. E.g.
beforeload:function(store) {
if(!store.checkedItems) store.checkedItems = [];
store.each(function(item) {
store.checkedItems[item.get("Id")] = item.get("selected");
});
},
load:function(store) {
if(!store.checkedItems) store.checkedItems = [];
store.each(function(item) {
item.set("selected",store.checkedItems[item.get("Id")]);
});
}
or
beforeload:function(store) {
if(!store.checkedItems) store.checkedItems = [];
store.each(function(item) {
store.checkedItems[item.get("Id")] = {selected: item.get("selected") }; // extensible if you want to keep more than one checkbox...
});
},
load:function(store) {
if(!store.checkedItems) store.checkedItems = [];
store.each(function(item) {
item.set(store.checkedItems[item.get("Id")]);
});
}
I am trying to implement a feature to select an item in kendo's multi-select control with server filtering. when user presses tab on the selected item. Here is my code of kepdown event:
if (e.keyCode === 9) {
var selectedItem = multiSelect.current();
if (selectedItem) {
var selectedIndex = selectedItem.data("idx");
if (selectedIndex >= 0) {
var currentValue = multiSelect.value().slice();
var dataitems = multiSelect.dataSource.view();
var selectedDataItem = dataitems[selectedIndex];
multiSelect.dataSource.filter({});
currentValue.push(selectedDataItem.relatedId);
multiSelect.value(currentValue);
multiSelect.trigger("change");
}
}
}
But it works fine as long as I am searching in same data view i.e. lets say I select two values starting with Cloud and then I select a value starting with App then kendo will remove previous two values starting with Cloud and control will contain just one value selected at the last.
I debugged kendo's code that the issue in function _index of kendo because it finds value in dataSource.view
I have recreated the issue at http://dojo.telerik.com/OtAvi
Your code is not working because you have serverFiltering set to true in the dataSource:
dataSource: {
type: "odata",
serverFiltering: true,
transport: {
read: {
url: "http://demos.telerik.com/kendo-ui/service/Northwind.svc/Products",
}
}
},
Since the data is being filtered on the server, the call multiSelect.dataSource.filter({}); is only clearing the already filtered data. With that said, when you call multiSelect.value(currentValue);, only the values from the currently filtered dataSource can be selected. This is causing the selection to only hold items from the current dataView.
Unless you have a strong reason not to, your easiest fix is to set serverFiltering set to false.