I am quite a beginner with JavaScript and I am trying to write a script that checks whether a website, let's say https://example.comreturns 404 status code or 200, and depending on the result, I'll access it or not. I am doing this on front end side. I don't have a server side, as the website is a static one that does not use a database.
I am doing this using XMLHttpRequest.
url = $("#foo").attr("href")
function UrlExists(ur)
{
var http = new XMLHttpRequest();
http.open('GET', ur, true);
http.setRequestHeader("Access-Control-Allow-Origin", "http, https");
http.setRequestHeader("Access-Control-Allow-Methods", "PUT, GET, POST, DELETE, OPTONS");
http.setRequestHeader("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept, Authorization")
http.send();
console.log(http.status);
}
UrlExists(url)
The problem is when I run this script, the following Exception is being thrown:
Access to XMLHttpRequest at 'http://example.com' from origin 'null' has been blocked by CORS policy: Response to preflight request doesn't pass access control check: No 'Access-Control-Allow-Origin' header is present on the requested resource.
From what I read so far, it is rather CORS issue than JavaScript and I could not find a solution so far.
Can anybody help me with this issue and explain me why?
I have checked other questions on SO and so far, I did not find a working solution. I am open to other solution too if there are any. Thank you so much!
I much appreciate your time!
UPDATE 1:
Unfortunately, I am still struggling with this issue. I've read a lot about CORS policy, the problem is that I can't get how I should I can safely allow headers to be sent through request from my server to another one.
The resources are: an HTML page and some JS code in it. As I have mentioned above, I am trying to send a request from my site to another one to check the status of that website, and if 404 pops, I want to redirect my user.
You need to set the CORS header on your web server. It is disabled by default for security reasons.
For example, in Nginx, you may do
add_header Access-Control-Allow-Origin example.com;
In case you are using a hosting service that does not allow webserver config modification, you may add the required headers to .htaccess file in your as shown under. In other words, place it in the root of your project where you have your index.html. Also, change the permissions to 644.
Header add Access-Control-Allow-Origin "*"
Header add Access-Control-Allow-Methods: "GET,POST,OPTIONS,DELETE,PUT"
References:
https://stackoverflow.com/a/20082724/2777988
https://blog.container-solutions.com/a-guide-to-solving-those-mystifying-cors-issues
I'm using Flutter and Nodejs (in HEROKU), this worked for me:
FLUTTER:
//FLUTTER
...
final headers = <String, String>{
'Content-Type': 'application/json',
"Access-Control-Allow-Origin": "*",
};
final resp = await http.post(//here we make the req
Uri.parse(url),
body: convert.jsonEncode(body),
headers: headers,
);
///
SERVER NODEJS IN HEROKU:
///SERVER NODEJS IN HEROKU
const express = require('express');
const cors = require("cors"); //this is a library to config easily cors
const app = express();
app.use(express.json());
app.use(cors({ origin: true })); // enable origin cors
app.post('/',async(req,res)=>{
...
///
Then i solved mixed content (with heroku), and cors problem
I'm trying to fetch some data from the REST API of HP Alm. It works pretty well with a small curl script—I get my data.
Now doing that with JavaScript, fetch and ES6 (more or less) seems to be a bigger issue. I keep getting this error message:
Fetch API cannot load . Response to preflight request doesn't
pass access control check: No 'Access-Control-Allow-Origin' header is
present on the requested resource. Origin 'http://127.0.0.1:3000' is
therefore not allowed access. The response had HTTP status code 501.
If an opaque response serves your needs, set the request's mode to
'no-cors' to fetch the resource with CORS disabled.
I understand that this is because I am trying to fetch that data from within my localhost and the solution should be using Cross-Origin Resource Sharing (CORS). I thought I actually did that, but somehow it either ignores what I write in the header or the problem is something else.
So, is there an implementation issue? Am I doing it wrong? I can't check the server logs unfortunately. I'm really a bit stuck here.
function performSignIn() {
let headers = new Headers();
headers.append('Content-Type', 'application/json');
headers.append('Accept', 'application/json');
headers.append('Access-Control-Allow-Origin', 'http://localhost:3000');
headers.append('Access-Control-Allow-Credentials', 'true');
headers.append('GET', 'POST', 'OPTIONS');
headers.append('Authorization', 'Basic ' + base64.encode(username + ":" + password));
fetch(sign_in, {
//mode: 'no-cors',
credentials: 'include',
method: 'POST',
headers: headers
})
.then(response => response.json())
.then(json => console.log(json))
.catch(error => console.log('Authorization failed : ' + error.message));
}
I am using Chrome. I also tried using that Chrome CORS Plugin, but then I am getting another error message:
The value of the 'Access-Control-Allow-Origin' header in the response
must not be the wildcard '*' when the request's credentials mode is
'include'. Origin 'http://127.0.0.1:3000' is therefore not allowed
access. The credentials mode of requests initiated by the
XMLHttpRequest is controlled by the withCredentials attribute.
This answer covers a lot of ground, so it’s divided into three parts:
How to use a CORS proxy to avoid “No Access-Control-Allow-Origin header” problems
How to avoid the CORS preflight
How to fix “Access-Control-Allow-Origin header must not be the wildcard” problems
How to use a CORS proxy to avoid “No Access-Control-Allow-Origin header” problems
If you don’t control the server your frontend code is sending a request to, and the problem with the response from that server is just the lack of the necessary Access-Control-Allow-Origin header, you can still get things to work—by making the request through a CORS proxy.
You can easily run your own proxy with code from https://github.com/Rob--W/cors-anywhere/.
You can also easily deploy your own proxy to Heroku in just 2-3 minutes, with 5 commands:
git clone https://github.com/Rob--W/cors-anywhere.git
cd cors-anywhere/
npm install
heroku create
git push heroku master
After running those commands, you’ll end up with your own CORS Anywhere server running at, e.g., https://cryptic-headland-94862.herokuapp.com/.
Now, prefix your request URL with the URL for your proxy:
https://cryptic-headland-94862.herokuapp.com/https://example.com
Adding the proxy URL as a prefix causes the request to get made through your proxy, which:
Forwards the request to https://example.com.
Receives the response from https://example.com.
Adds the Access-Control-Allow-Origin header to the response.
Passes that response, with that added header, back to the requesting frontend code.
The browser then allows the frontend code to access the response, because that response with the Access-Control-Allow-Origin response header is what the browser sees.
This works even if the request is one that triggers browsers to do a CORS preflight OPTIONS request, because in that case, the proxy also sends the Access-Control-Allow-Headers and Access-Control-Allow-Methods headers needed to make the preflight succeed.
How to avoid the CORS preflight
The code in the question triggers a CORS preflight—since it sends an Authorization header.
https://developer.mozilla.org/docs/Web/HTTP/Access_control_CORS#Preflighted_requests
Even without that, the Content-Type: application/json header will also trigger a preflight.
What “preflight” means: before the browser tries the POST in the code in the question, it first sends an OPTIONS request to the server, to determine if the server is opting-in to receiving a cross-origin POST that has Authorization and Content-Type: application/json headers.
It works pretty well with a small curl script - I get my data.
To properly test with curl, you must emulate the preflight OPTIONS the browser sends:
curl -i -X OPTIONS -H "Origin: http://127.0.0.1:3000" \
-H 'Access-Control-Request-Method: POST' \
-H 'Access-Control-Request-Headers: Content-Type, Authorization' \
"https://the.sign_in.url"
…with https://the.sign_in.url replaced by whatever your actual sign_in URL is.
The response the browser needs from that OPTIONS request must have headers like this:
Access-Control-Allow-Origin: http://127.0.0.1:3000
Access-Control-Allow-Methods: POST
Access-Control-Allow-Headers: Content-Type, Authorization
If the OPTIONS response doesn’t include those headers, the browser will stop right there and never attempt to send the POST request. Also, the HTTP status code for the response must be a 2xx—typically 200 or 204. If it’s any other status code, the browser will stop right there.
The server in the question responds to the OPTIONS request with a 501 status code, which apparently means it’s trying to indicate it doesn’t implement support for OPTIONS requests. Other servers typically respond with a 405 “Method not allowed” status code in this case.
So you’ll never be able to make POST requests directly to that server from your frontend JavaScript code if the server responds to that OPTIONS request with a 405 or 501 or anything other than a 200 or 204 or if doesn’t respond with those necessary response headers.
The way to avoid triggering a preflight for the case in the question would be:
if the server didn’t require an Authorization request header but instead, e.g., relied on authentication data embedded in the body of the POST request or as a query param
if the server didn’t require the POST body to have a Content-Type: application/json media type but instead accepted the POST body as application/x-www-form-urlencoded with a parameter named json (or whatever) whose value is the JSON data
How to fix “Access-Control-Allow-Origin header must not be the wildcard” problems
I am getting another error message:
The value of the 'Access-Control-Allow-Origin' header in the response
must not be the wildcard '*' when the request's credentials mode is
'include'. Origin 'http://127.0.0.1:3000' is therefore not allowed
access. The credentials mode of requests initiated by the
XMLHttpRequest is controlled by the withCredentials attribute.
For requests that have credentials, browsers won’t let your frontend JavaScript code access the response if the value of the Access-Control-Allow-Origin header is *. Instead the value in that case must exactly match your frontend code’s origin, http://127.0.0.1:3000.
See Credentialed requests and wildcards in the MDN HTTP access control (CORS) article.
If you control the server you’re sending the request to, a common way to deal with this case is to configure the server to take the value of the Origin request header, and echo/reflect that back into the value of the Access-Control-Allow-Origin response header; e.g., with nginx:
add_header Access-Control-Allow-Origin $http_origin
But that’s just an example; other (web) server systems have similar ways to echo origin values.
I am using Chrome. I also tried using that Chrome CORS Plugin
That Chrome CORS plugin apparently just simplemindedly injects an Access-Control-Allow-Origin: * header into the response the browser sees. If the plugin were smarter, what it would be doing is setting the value of that fake Access-Control-Allow-Origin response header to the actual origin of your frontend JavaScript code, http://127.0.0.1:3000.
So avoid using that plugin, even for testing. It’s just a distraction. To test what responses you get from the server with no browser filtering them, you’re better off using curl -H as above.
As far as the frontend JavaScript code for the fetch(…) request in the question:
headers.append('Access-Control-Allow-Origin', 'http://localhost:3000');
headers.append('Access-Control-Allow-Credentials', 'true');
Remove those lines. The Access-Control-Allow-* headers are response headers. You never want to send them in requests. The only effect of that is to trigger a browser to do a preflight.
This error occurs when the client URL and server URL don't match, including the port number. In this case you need to enable your service for CORS which is cross origin resource sharing.
If you are hosting a Spring REST service then you can find it in the blog post CORS support in Spring Framework.
If you are hosting service using a Node.js server then
Stop the Node.js server.
npm install cors --save
Add following lines to your server.js
const cors=require("cors");
const corsOptions ={
origin:'*',
credentials:true, //access-control-allow-credentials:true
optionSuccessStatus:200,
}
app.use(cors(corsOptions)) // Use this after the variable declaration
The problem arose because you added the following code as the request header in your front-end:
headers.append('Access-Control-Allow-Origin', 'http://localhost:3000');
headers.append('Access-Control-Allow-Credentials', 'true');
Those headers belong to the response, not request. So remove them, including the line:
headers.append('GET', 'POST', 'OPTIONS');
Your request had 'Content-Type: application/json', hence triggered what is called CORS preflight. This caused the browser sent the request with the OPTIONS method. See CORS preflight for detailed information.
Therefore in your back-end, you have to handle this preflighted request by returning the response headers which include:
Access-Control-Allow-Origin : http://localhost:3000
Access-Control-Allow-Credentials : true
Access-Control-Allow-Methods : GET, POST, OPTIONS
Access-Control-Allow-Headers : Origin, Content-Type, Accept
Of course, the actual syntax depends on the programming language you use for your back-end.
In your front-end, it should be like so:
function performSignIn() {
let headers = new Headers();
headers.append('Content-Type', 'application/json');
headers.append('Accept', 'application/json');
headers.append('Authorization', 'Basic ' + base64.encode(username + ":" + password));
headers.append('Origin','http://localhost:3000');
fetch(sign_in, {
mode: 'cors',
credentials: 'include',
method: 'POST',
headers: headers
})
.then(response => response.json())
.then(json => console.log(json))
.catch(error => console.log('Authorization failed: ' + error.message));
}
In my case, I use the below solution.
Front-end or Angular
post(
this.serverUrl, dataObjToPost,
{
headers: new HttpHeaders({
'Content-Type': 'application/json',
})
}
)
back-end (I use PHP)
header("Access-Control-Allow-Origin: http://localhost:4200");
header('Access-Control-Allow-Methods: GET, POST, OPTIONS');
header("Access-Control-Allow-Headers: Content-Type, Authorization");
$postdata = file_get_contents("php://input");
$request = json_decode($postdata);
print_r($request);
Using dataType: 'jsonp' worked for me.
async function get_ajax_data(){
var _reprojected_lat_lng = await $.ajax({
type: 'GET',
dataType: 'jsonp',
data: {},
url: _reprojection_url,
error: function (jqXHR, textStatus, errorThrown) {
console.log(jqXHR)
},
success: function (data) {
console.log(data);
// note: data is already json type, you
// just specify dataType: jsonp
return data;
}
});
} // function
Just my two cents... regarding How to use a CORS proxy to get around “No Access-Control-Allow-Origin header” problems
For those of you working with php at the backend, deploying a "CORS proxy" is as simple as:
create a file named 'no-cors.php' with the following content:
$URL = $_GET['url'];
echo json_encode(file_get_contents($URL));
die();
on your front end, do something like:
fetch('https://example.com/no-cors.php' + '?url=' + url)
.then(response=>{*/Handle Response/*})`
If your API is written in ASP.NET Core, then please follow the below steps:
Install the Microsoft.AspNetCore.Cors package.
Add the below line in the ConfigureServices method in file Startup.cs:
services.AddCors();
Add the below line in the Configure method in file startup.cs:
app.UseCors(options =>
options.WithOrigins("http://localhost:8080")
.AllowAnyHeader()
.AllowAnyMethod());
Make sure you add this after - app.UseRouting();
Refer to the below image(from MSDN) to see the middleware order:
https://i.stack.imgur.com/vQ4yT.png
Possible causes of CORS issues
Check your server-side access headers: Refer to this link
Check what request header is received from the server in the browser. The below image shows the headers
If you are using the fetch method and trying to access the cross-origin request make sure mode:cors is there. Refer to this link
Sometimes if there is an issue in the program also you are getting the CORS issue, so make sure your code is working properly.
Make sure to handle the OPTION method in your API.
Adding mode:no-cors can avoid CORS issues in the API.
fetch(sign_in, {
mode: 'no-cors',
credentials: 'include',
method: 'POST',
headers: headers
})
.then(response => response.json())
.then(json => console.log(json))
.catch(error => console.log('Authorization failed : ' + error.message));
}
In December 2021, Chrome 97, the Authorization: Bearer ... is not allowed unless it is in the Access-Control-Allow-Headers preflight response (ignores *). It produced this warning:
[Deprecation] authorization will not be covered by the wildcard symbol (*)
See: Chrome Enterprise release notes, Chrome 97
It also appears to enforce the same restriction on * on Access-Control-Allow-Origin. If you want to revive *-like behavior now that it is blocked, you'll likely have to read the requester's origin and return it as the allowed origin in the preflight response.
In some cases, a library may drop the Access-Control-Allow-Origin response header when there is some other invalid credential (example: an expired JWT). Then, the browser shows the "No 'Access-Control-Allow-Origin' header is present" error instead of the actual error (which in this example could be an expired JWT). Be sure that your library doesn't drop the header and confuse the client.
Faced this issue in my react/express app. Adding the below code in server.js (or your server file name) fixed the issue for me. Install cors and then
const cors = require('cors');
app.use(cors({
origin: 'http://example.com', // use your actual domain name (or localhost), using * is not recommended
methods: ['GET', 'POST', 'PUT', 'DELETE', 'PATCH', 'HEAD', 'OPTIONS'],
allowedHeaders: ['Content-Type', 'Origin', 'X-Requested-With', 'Accept', 'x-client-key', 'x-client-token', 'x-client-secret', 'Authorization'],
credentials: true
}))
Now you can make straightforward API calls from your front-end without having to pass any additional parameters.
With Node.js, if you are using routers, make sure to add CORS before the routers. Otherwise, you'll still get the CORS error. Like below:
const cors = require('cors');
const userRouter = require('./routers/user');
expressApp = express();
expressApp.use(cors());
expressApp.use(express.json());
expressApp.use(userRouter);
In case you are using Node.js and Express.js as the back-end and React & Axios as the front-end within a development environment in macOS, you need to run both sides under HTTPS. Below is what finally worked for me (after many hours of deep dive and testing):
Step 1: Create an SSL certificate
Just follow the steps from How to get HTTPS working on your local development environment in 5 minutes.
You will end up with a couple of files to be used as credentials to run the HTTPS server and React web:
server.key & server.crt
You need to copy them in the root folders of both the front and back ends (in a production environment, you might consider copying them in folder ./ssh for the back-end).
Step 2: Back-end setup
I read a lot of answers proposing the use of 'cors' package or even setting ('Access-Control-Allow-Origin', '*'), which is like saying: "Hackers are welcome to my website". Just do like this:
import express from 'express';
const emailRouter = require('./routes/email'); // in my case, I was sending an email through a form in React
const fs = require('fs');
const https = require('https');
const app = express();
const port = 8000;
// CORS (Cross-Origin Resource Sharing) headers to support Cross-site HTTP requests
app.all('*', (req, res, next) => {
res.header("Access-Control-Allow-Origin", "https://localhost:3000");
next();
});
// Routes definition
app.use('/email', emailRouter);
// HTTPS server
const credentials = {
key: fs.readFileSync('server.key'),
cert: fs.readFileSync('server.crt')
};
const httpsServer = https.createServer(credentials, app);
httpsServer.listen(port, () => {
console.log(`Back-end running on port ${port}`);
});
In case you want to test if the https is OK, you can replace the httpsServer constant by the one below:
https.createServer(credentials, (req: any, res: any) => {
res.writeHead(200);
res.end("hello world from SSL\n");
}).listen(port, () => {
console.log(`HTTPS server listening on port ${port}...`);
});
And then access it from a web browser: https://localhost:8000/
Step 3: Front-end setup
This is the Axios request from the React front-end:
await axios.get(`https://localhost:8000/email/send`, {
params: { /* Whatever data you want to send */ },
headers: {
'Content-Type': 'application/json',
}
})
And now, you need to launch your React web in HTTPS mode using the credentials for SSL we already created. Type this in your macOS terminal:
HTTPS=true SSL_CRT_FILE=server.crt SSL_KEY_FILE=server.key npm start
At this point, you are sending a request from an HTTPS connection at port 3000 from your front-end, to be received by an HTTPS connection at port 8000 by your back-end. CORS should be happy with this ;)
For those using ASP.NET Core:
In my case, I was using JavaScript to make a blob from an image stored on the API (the server), so the URL was pointing to that resource. In that API's program.cs class, I already had a CORS policy, but it didn't work.
After I read the Microsoft documentation (read the first paragraph) about this issue, it is said that if you want to access a resource on the server, by using JavaScript (which is what I was trying to do), then you must call the app.UseCors(); before the app.UseStaticFiles(); which is typically the opposite.
My program.cs file:
const string corsPolicyName = "ApiCORS";
builder.Services.AddCors(options =>
{
options.AddPolicy(corsPolicyName, policy =>
{
policy.WithOrigins("https://localhost:7212");
});
});
...
var app = builder.Build();
app.UseSwagger();
app.UseSwaggerUI(settings =>
{
settings.DisplayRequestDuration();
settings.EnableTryItOutByDefault();
});
app.UseHttpsRedirection();
app.UseCors(corsPolicyName); // 👈 This should be above the UseStaticFiles();
app.UseStaticFiles(); // 👈 Below the UseCors();
app.UseAuthentication();
app.UseAuthorization();
app.UseApiCustomExceptionHandler();
app.MapControllers();
app.Run();
Remove this:
credentials: 'include',
For a Node.js and Express.js backend I use this :)
app.use(function(req, res, next) {
res.header("Access-Control-Allow-Origin", "YOUR-DOMAIN.TLD"); // Update to match the domain you will make the request from
res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");
next();
});
For more details: CORS on ExpressJS
I have encountered this error several times over the past few years -- seemingly showing up out of the blue in a previously functioning website.
I determined that Chrome (and possibly other browsers) can return this error when there is some unrelated error that occurs on the server that prevents it from processing the CORS request (and prior to returning an HTTP 500 error).
These all occurred in a .NET Core environment, and I am not sure if it would happen in other environments.
Anyway, if your code has functioned before, and seems correct, consider debugging to find if there is some other error that is firing before you go crazy trying to solve an error that isn't really there.
In my case, the web server prevented the "OPTIONS" method
Check your web server for the options method
Apache: https://www-01.ibm.com/support/docview.wss?uid=ibm10735209
web tier: 4.4.6 Disabling the Options Method https://docs.oracle.com/cd/E23943_01/web.1111/e10144/getstart.htm#HSADM174
nginx: https://medium.com/#hariomvashisth/cors-on-nginx-be38dd0e19df
I'm using "webtier"
/www/webtier/domains/[domainname]/config/fmwconfig/components/OHS/VCWeb1/httpd.conf
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^OPTIONS
RewriteRule .* . [F]
</IfModule>
change to
<IfModule mod_rewrite.c>
RewriteEngine off
RewriteCond %{REQUEST_METHOD} ^OPTIONS
RewriteRule .* . [F]
</IfModule>
In my case, the solution was dumb as hell... Your allowed origin shouldn't have a slash at the end.
E.g., https://example.com/ -> https://example.com
In my case, I had to add a custom header middleware below all the existing middleware. I think some middleware might conflict with the Access-Control-Allow-Origin Header and try to set it according to their needs.
So the code would be something like this:
app.use(cors());
....all other middleware here
app.use(function (req, res, next) {
res.header("Access-Control-Allow-Origin", "http://localhost:3000");
res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");
next();
});
...your routes
I make this mistake a lot of times, and because of it, I've made a "check-list" to all of you.
Enable CORS on your project: If you're using Node.js (by example) you can use:
npm install cors;
import cors from 'cors';
app.use(cors());
You can manually set the headers like this (if you want it):
app.use((req, res, next) => {
res.setHeader('Access-Control-Allow-Origin', '*');
res.setHeader('Access-Control-Allow-Headers', 'Origin, X-Requested-With, Content-Type, Accept, Authortization');
res.setHeader('Acces-Control-Allow-Methods', 'GET, POST, PATCH, DELETE');
Remember to add http:// to your API link in your frontend project, some browsers like Chrome do not accept a request using CORS if the request URL isn't HTTP or HTTPS:
http://localhost:3000/api
Check if your project is using a proxy.config.js file. See Fixing CORS errors with Angular CLI proxy.
When the client used to call our backend service from his host username.companyname.com, he used to get the above error
Two things are required:
while sending back the response, send the header whose key is Access-Control-Allow-Origin and value is *:
context.Writer.Header()["Access-Control-Allow-Origin"] = []string{"*"} // Important to avoid a CORS error
Use the Go CORS library to set AllowCredentials to false and AllowAllOrigins to true.
Use the below npm module. This has virtually saved lives.
https://www.npmjs.com/package/local-cors-proxy
You're getting a CORS error, for example like the below URL
https://www.google.co.in/search/list
After successfully installed(local-cors-proxy) global npm install -g local-cors-proxy and set proxy URL that CORS URL.
For example, here the below CORS issue getting in localhost. So you need to add the domain name(https://www.google.co.in) and port(--port 8010) for the CORS issue domain.
For more please check the link
https://www.npmjs.com/package/local-cors-proxy
lcp --proxyUrl https://www.google.co.in --port 8010
After successfully set, it will generate the local proxy URL like below.
http://localhost:8010/proxy
Use that domain name in your project API URL.
API full URL:
http://localhost:8010/proxy/search/list
To get without a CORS issue response in your local project.
Using WebAPI build in .Net Core 6.0
None of the above worked for me... This did it
// global cors policy
app.UseCors(x => x
.AllowAnyMethod()
.AllowAnyHeader()
.SetIsOriginAllowed(origin => true) // allow any origin
.AllowCredentials());
credit: https://stackoverflow.com/a/70660054/8767516
Try adding all these headers in this code below Before every route, you define in your app, not after the routes
app.use((req, res, next) =>{
res.setHeader('Access-Control-Allow-Origin', '*');
res.setHeader('Access-Control-Allow-Headers','Origin, X-Requested-With, Content-Type,Accept, Authortization');
res.setHeader('Acces-Control-Allow-Methods','GET, POST, PATCH, DELETE');
If you are getting this error while deploying React app to netlify, use these steps.
step 1: Create netlify.toml file in the root folder of your react app.
step 2: Copy paste this code:
`[[redirects]]
from = "/cors-proxy/*"
to = ":splat"
status = 200
force = true`
step3: update your fetch/axios api this way:
It took me a while to figure this out.
I am working on an app using Vue js.
According to my setting I need to pass to a variable to my URL when setting change.
<!-- language: lang-js -->
$.get('http://172.16.1.157:8002/firstcolumn/' + c1v + '/' + c1b, function (data) {
// some code...
});
But when my app hit on URL, it shows the following message.
Failed to load http://172.16.1.157:8002/firstcolumn/2017-03-01/2017-10-26: Redirect from 'http://172.16.1.157:8002/firstcolumn/2017-03-01/2017-10-26' to 'http://172.16.1.157:8002/firstcolumn/2017-03-01/2017-10-26/' has been blocked by CORS policy: No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin 'http://localhost:8080' is therefore not allowed access.
In addition to what awd mentioned about getting the person responsible for the server to reconfigure (an impractical solution for local development) I use a change-origin chrome plugin like this:
Moesif Orign & CORS Changer (use to be free but now wants a work email address >_>)
Allow CORS: Access-Control-Allow-Origin
You can make your local dev server (ex: localhost:8080) to appear to be coming from 172.16.1.157:8002 or any other domain.
In case the 2nd plugin link breaks in the future or the plugin writer decides to capitalize off the fame of this thread, open your browser's
plugin marketplace and search "allow cors", there's going to be a
bunch of them.
Thanks all, I solved by this extension on chrome.
Allow CORS: Access-Control-Allow-Origin
If you have control over your server, you can use PHP:
<?PHP
header('Access-Control-Allow-Origin: *');
?>
Ask the person maintaining the server at http://172.16.1.157:8002/ to add your hostname to Access-Control-Allow-Origin hosts, the server should return a header similar to the following with the response-
Access-Control-Allow-Origin: yourhostname:port
Using npm:
To allow cross-origin requests install 'cors':
npm i cors
Add this in the server-side:
let cors = require("cors");
app.use(cors());
When you have this problem with Chrome, you don't need an Extension.
Start Chrome from the Console:
chrome.exe --user-data-dir="C:/Chrome dev session" --disable-web-security
Maybe you have to close all Tabs in Chrome and restart it.
I will assume that you're a front-end developer only and that you don't have access to the backend of the application (regarding the tags of the question).
Short answer on how to properly solve this in your case? You can't, you'll need somebody else.
What is this about?
You need to understand that CORS is a security thing, it's not just here to annoy you just for fun.
It's purpose is to mainly prevent the usage of a (malicious) HTTP call from a non-whitelisted frontend to your backend with some critical mutation.
You could give a look to this YouTube video or any other one really, but I recommend a visual video because text-based explanation can be quite hard to understand.
You also need to understand that if you use Postman or any other tool to try your API call, you will not get the CORS issue. The reason being that those tools are not Web frontends but rather some server-based tools.
Hence, don't be surprised if something is working there but not in your Vue app, the context is different.
Now, how to solve this?
Depending of the framework used by your backend team, the syntax may be quite different but overall, you'll need to tell them to provide something like Access-Control-Allow-Origin: http://localhost:3000 (or any other port you'll be using).
PS: Using Access-Control-Allow-Origin: * would be quite risky because it would allow anybody to access it, hence why a stricter rule is recommended.
If you're using a service, like an API to send SMS, payment, some Google console or something else really, you'll need to allow your localhost in the dashboard of the service. Ask for credentials to your manager or Tech Lead.
If you have access to the backend, you could it yourself as shown here (ExpressJS in this example): https://flaviocopes.com/cors/
How to hack it in a dirty way?
If you're in a damn hurry and want to get something really dirty, you could use a lot of various hacks a listed in the other answers, here's a quick list:
use any extension who is able to create a middleware and forward the request to the backend (it will work because it's not directly coming from your frontend)
force your browser to disable CORS, not sure how this would actually solve the issue
use a proxy, if you're using Nuxt2, #nuxtjs/proxy is a popular one but any kind of proxy (even a real backend will do the job)
any other hack related somehow to the 3 listed above...
At the end, solving the CORS issue can be done quite fast and easily. You only need to communicate with your team or find something on your side (if you have access to the backend/admin dashboard of some service).
I heavily do recommend trying get it right from the beginning because it's related to security and that it may be forgotten down the road...
The approved answer to this question is not valid.
You need to set headers on your server-side code
app.use((req,res,next)=>{
res.setHeader('Access-Control-Allow-Origin','*');
res.setHeader('Access-Control-Allow-Methods','GET,POST,PUT,PATCH,DELETE');
res.setHeader('Access-Control-Allow-Methods','Content-Type','Authorization');
next();
})
You can also try a chrome extension to add these headers automatically.
Hello If I understood it right you are doing an XMLHttpRequest to a different domain than your page is on. So the browser is blocking it as it usually allows a request in the same origin for security reasons. You need to do something different when you want to do a cross-domain request. A tutorial about how to achieve that is Using CORS.
When you are using postman they are not restricted by this policy. Quoted from Cross-Origin XMLHttpRequest:
Regular web pages can use the XMLHttpRequest object to send and receive data from remote servers, but they're limited by the same origin policy. Extensions aren't so limited. An extension can talk to remote servers outside of its origin, as long as it first requests cross-origin permissions.
To add the CORS authorization to the header using Apache, simply add the following line inside either the <Directory>, <Location>, <Files> or <VirtualHost> sections of your server config (usually located in a *.conf file, such as httpd.conf or apache.conf), or within a .htaccess file:
Header set Access-Control-Allow-Origin "*"
And then restart apache.
Altering headers requires the use of mod_headers. Mod_headers is enabled by default in Apache, however, you may want to ensure it's enabled.
I had the same problem in my Vue.js and SpringBoot projects. If somebody work with spring you can add this code:
#Bean
public FilterRegistrationBean simpleCorsFilter() {
UrlBasedCorsConfigurationSource source = new UrlBasedCorsConfigurationSource();
CorsConfiguration config = new CorsConfiguration();
config.setAllowCredentials(true);
// *** URL below needs to match the Vue client URL and port ***
config.setAllowedOrigins(Collections.singletonList("http://localhost:8080"));
config.setAllowedMethods(Collections.singletonList("*"));
config.setAllowedHeaders(Collections.singletonList("*"));
source.registerCorsConfiguration("/**", config);
FilterRegistrationBean bean = new FilterRegistrationBean<>(new CorsFilter(source));
bean.setOrder(Ordered.HIGHEST_PRECEDENCE);
return bean;
}
I found solution in this article Build a Simple CRUD App with Spring Boot and Vue.js
You are making a request to external domain 172.16.1.157:8002/ from your local development server that is why it is giving cross origin exception.
Either you have to allow headers Access-Control-Allow-Origin:* in both frontend and backend or alternatively use this extension cors header toggle - chrome extension unless you host backend and frontend on the same domain.
Try running this command in your terminal and then test it again.
curl -H "origin: originHost" -v "RequestedResource"
Eg:
If my originHost equals https://localhost:8081/ and my RequestedResource equals https://example.com/
My command would be as below:
curl -H "origin: https://localhost:8081/" -v "https://example.com/"
If you can notice the following line then it should work for you.
< access-control-allow-origin: *
Hope this helps.
Do specify #CrossOrigin(origins = "http://localhost:8081")
in Controller class.
You can solve this temporarily by using the Firefox add-on, CORS Everywhere. Just open Firefox, press Ctrl+Shift+A , search the add-on and add it!
You won't believe this,
Make sure to add "." at the end of the "url"
I got a similar error with this code:
fetch(https://itunes.apple.com/search?term=jack+johnson)
.then( response => {
return response.json();
})
.then(data => {
console.log(data.results);
}).catch(error => console.log('Request failed:', error))
The error I got:
Access to fetch at 'https://itunes.apple.com/search?term=jack+johnson'
from origin 'http://127.0.0.1:5500' has been blocked by CORS policy:
No 'Access-Control-Allow-Origin' header is present on the requested
resource. If an opaque response serves your needs, set the request's mode to 'no-cors' to fetch the resource with CORS disabled.
But I realized after a lot of research that the problem was that I did not copy the
right URL address from the iTunes API documentation.
It should have been
https://itunes.apple.com/search?term=jack+johnson.
not
https://itunes.apple.com/search?term=jack+johnson
Notice the dot at the end
There is a huge explanation about why the dot is important quoting issues about DNS and character encoding but the truth is you probably do not care. Try adding the dot it might work for you too.
When I added the "." everything worked like a charm.
I hope it works for you too.
install:
npm i cors
Then include cors():
app.get("/list",cors(),(req,res) =>{
});
In addition to the Berke Kaan Cetinkaya's answer.
If you have control over your server, you can do the following in ExpressJs:
app.use(function(req, res, next) {
// update to match the domain you will make the request from
res.header("Access-Control-Allow-Origin", "YOUR-DOMAIN.TLD");
res.header("Access-Control-Allow-Methods", "GET,HEAD,OPTIONS,POST,PUT");
res.header("Access-Control-Allow-Headers", "Origin, X-Requested-With, Content-Type, Accept");
next();
});
https://enable-cors.org/server_expressjs.html
I tried this code,and that works for me.You can see the documentation in this link
var io = require("socket.io")(http, {
cors: {
origin: "*",
methods: ["GET", "POST"]
}
})
The reason that I came across this error was that I hadn't updated the path for different environments.
you have to customize security for your browser or allow permission through customizing security. (it is impractical for your local testing)
to know more about please go through the link.
https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS
These errors may be caused due to follow reasons, ensure the following steps are followed. To connect the local host with the local virtual machine(host). Here, I'am connecting http://localhost:3001/ to the http://abc.test Steps to be followed:
1.We have to allow CORS, placing Access-Control-Allow-Origin: in header of request
may not work. Install a google extension which enables a CORS request.*
2.Make sure the credentials you provide in the request are valid.
3.Make sure the vagrant has been provisioned. Try vagrant up --provision this make the localhost connect to db of the homestead.
Try changing the content type of the header. header:{ 'Content-Type' : 'application/x-www-form-urlencoded; charset=UTF-8;application/json' }
this point is very important.
Another solution to this problem in a specific scenario :
If
AWS APIGW is your backend with authentication enabled and
authentication fails,
your browser may end up complaining about CORS even if CORS is enabled in APIGW. You also need to enable CORS for 4XX as follows
API:YourAPI > Resources > /YourResource > Actions > Enable CORS > Gateway Responses for yourAPI check Default 4XX
Authentication will still fail but it won't look like CORS is the root cause
$.get('https://172.16.1.157:8002/firstcolumn/' + c1v + '/' + c1b, function (data) {
// some code...
});
Just put "https" .