I'm trying to hide an image after I scroll down my page. When scrolling my header gets a class fl-theme-builder-header-scrolled. My image div has a class hiding-image and I want to add a class image-off when the fl-theme-builder-header-scrolled class shows up in the header.
This is what I have:
$(document).ready(function() {
if($( 'header' ).hasClass( 'fl-theme-builder-header-scrolled' )) {
$( '.hiding-image' ).toggleClass( 'image-off' );
}
});
but this doesn't work. Any advice? Thx.
Your code only runs once after the document ready, as soon as the page loads. So if the header doesn't have the fl-theme-builder-header-scrolled class and only gets added later, your code will not run again.
You need a a mutation Observer.
Check this thread: Event trigger on a class change
Alternatively you can do as #Brewal is saying, putting the code evaluation on the scroll event. Although be careful so you don't run the code every time the scroll event is triggered since it can slow your website performance, specially on mobile devices.
Try something like this.
$(window).scroll(function() {
if($( 'header' ).hasClass( 'fl-theme-builder-header-scrolled' )) {
$( '.hiding-image' ).toggleClass( 'image-off' );
}
});
As pointed out in the comments, I think the best approach would be to find where the fl-theme-builder-header-scrolled class is already being controlled.
However, If you really would want to put the logic in a separate area, you can do it like this:
$(document).ready(function () {
$(window).scroll(function () { //attach to window scroll event
if ($('header').hasClass('fl-theme-builder-header-scrolled') && !$('.hiding-image').hasClass('image-off')) {
$('.hiding-image').addClass('image-off'); //add class only if it does not already exist;
} else {
if ($('.hiding-image').hasClass('image-off')) {
$('.hiding-image').removeClass('image-off'); //remove class
}
}
});
});
Check condition like this:
`$(window).scroll(function() {
if($( 'header' ).hasClass( 'fl-theme-builder-header-scrolled' ))
{
$( '.hiding-image' ).addClass( 'image-off' );
}
else
{
$( '.hiding-image' ).removeClass( 'image-off' );
}
});`
I finally managed to make it work doing this:
(function($){
$(function(){
var headerThemer = $( '.fl-builder-content[data-type=header]' ).eq(0);
$(window).on( 'scroll.fl-theme-builder-header-scrolled', function(){
if ( headerThemer.hasClass('fl-theme-builder-header-scrolled') ) {
$('.hiding-image').hide();
}
else {
$('.hiding-image').show();
}
});
})
})(jQuery);
I used OnClick drop down text with JavaScript and HTML code to make the dropdown hidden div project.
But the problems are:
1 - It won't open divs separatelly, all of the "projects" are open at once;
2 - I won't come back up once I click it again.
I made another line of code to make it go up:
$(function() {
$(".project").on('click', function() {
$(this).parent().find('.details').slideDown();
});
$(".project").on('click', function() {
$(this).parent().find('.details').slideUp();
});
});
$(function() {
$(".project2").on('click', function() {
$(this).parent().find('.details').slideDown();
});
$(".project2").on('click', function() {
$(this).parent().find('.details').slideUp();
});
});
And so on... and it goes up as soon as I click it only once, like an animation. It won't stay down and THEN on the next click it goes back up. AND it still gets both down instead of each one separately.
You shouldn't use document.ready to often if isn't needed.
// Shorthand for $( document ).ready()
$(function() {
});
If you bind two events to an element, .. it will be executed if you don't stopPropergation or making "cases".
So you can check the visibility and decide what to do:
$( function () {
$("[class^='project']").on( 'click', function () {
var $details = $( this ).parent().find( '.details' );
if ($details.is(':visible'))
$( this ).parent().find( '.details' ).slideUp();
else
$( this ).parent().find( '.details' ).slideDown();
});
} );
https://jsfiddle.net/3738Lnmf/
edit:
slideToggle is more elegant :) #Diego López
$( function () {
$("[class^='project']").on( 'click', function () {
$(this).parent().find('.details').slideToggle();
});
} );
https://jsfiddle.net/3738Lnmf/1/
Use .slideToggle() if you want to toggle between show and hide the div elements
$(function() {
$(".project").on('click', function() {
$(this).parent().find('.details').slideToggle();
});
$(".project2").on('click', function() {
$(this).parent().find('.details').slideToggle();
});
});
I am using the following jQuery to move content from the top of the main content column in mobile view to the top of the sidebar when in desktop view.
if (ww >= 768) {
$( '#move-me' ).insertBefore($( '#top-widget' ) );
}
Here's a fiddle:
http://jsfiddle.net/richerimage/co6nw6va/1/
This works fine on page load, but I'd like the content to be able to move back and forth on window re-size
Like all things, I guess this is easy if you know how! :)
Any help is greatly appreciated
With thanks
Richard
p.s. also, is there a way to move the content to the top of the #sidebar without the need to reference the #top-widget?
Try this:
$( document ).ready(function() {
doThis();
});
$( window ).resize( function() {
doThis();
});
function doThis(){
var ww = document.body.clientWidth;
if (ww >= 768) {
$( '#move-me' ).insertBefore($( '#top-widget' ) );
}else{
$( '#move-me' ).insertBefore($( '.post_content' ) );
}
}
Check JSFiddle Demo
So you need to use resize event handler:
$( window ).resize( function() {
var ww = document.body.clientWidth;
if (ww >= 768) {
$( '#move-me' ).insertBefore($( '#top-widget' ) );
}
});
jsFiddle
You will have to excuse a probably very basic question as I am still getting to grips with jQuery.
I've set up this code so that on click of the .team-member figure elememt, a class called 'overlayOn' is added which adds an absolutely positioned div with an rbga colour (anyway I digress).
This works perfectly, except I want it so that on click of an element it adds the 'overlayOn' class and disables the others.
Now I know this should be a simple case of removeClass, or toggleClass but I cannot for the life of me get this working. The annoying thing is I have actually done this before but cannot see where I am going wrong this time.
jQuery(document).ready(function() {
// Store the references outside the event handler
var $window = jQuery(window);
var $memberItem = ".team-member figure";
function checkWidth() {
var windowsize = $window.width();
console.log(windowsize);
if (windowsize < 768) {
// if the window is smaller than 768px then allow click to see overlay
jQuery($memberItem).click(function(event) {
event.preventDefault();
jQuery(this).toggleClass('overlayOn');
});
}
}
// Execute on load
checkWidth();
// Bind event listener
jQuery(window).resize(checkWidth);
});
Updated: Below is my code from the suggestions given, when clicking on an element now it will remove the class from others but if I want to click on an element with the overlayOn class to remove it from itself it will not work.
My updated code is below.
jQuery(".team-member figure").click(function (event) {
var $window = jQuery(window);
var windowsize = $window.width();
if (windowsize < 768) {
event.preventDefault();
$('.team-member figure').removeClass('overlayOn');
$(this).toggleClass('overlayOn');
}
});
You can check the window.width() inside the click event itself. $('.overlayOn').removeClass('overlayOn'); will help you to remove a the class name overlayOn from all the elements. Then you can add overlayOn to the current object using .addClass() method
jQuery(".team-member figure").click(function (event) {
var windowsize = $window.width();
if (windowsize < 768) {
event.preventDefault();
$('.overlayOn').removeClass('overlayOn');
$(this).addClass('overlayOn');
}
});
Edit
jQuery(".team-member figure").click(function (event) {
var $window = jQuery(window);
var windowsize = $window.width();
if (windowsize < 768) {
event.preventDefault();
$('.overlayOn').not(this).removeClass('overlayOn');
$(this).toggleClass('overlayOn');
}
});
You can use .removeClass() to remove class overlayOn from all .team-member figure and only add this class to clicked figure:
jQuery($memberItem).click(function(event) {
event.preventDefault();
jQuery('.team-member figure').removeClass('overlayOn');
jQuery(this).toggleClass('overlayOn');
});
We've got a few pages using ajax to load in content and there's a few occasions where we need to deep link into a page. Instead of having a link to "Users" and telling people to click "settings" it's helpful to be able to link people to user.aspx#settings
To allow people to provide us with correct links to sections (for tech support, etc.) I've got it set up to automatically modify the hash in the URL whenever a button is clicked. The only issue of course is that when this happens, it also scrolls the page to this element.
Is there a way to disable this? Below is how I'm doing this so far.
$(function(){
//This emulates a click on the correct button on page load
if(document.location.hash){
$("#buttons li a").removeClass('selected');
s=$(document.location.hash).addClass('selected').attr("href").replace("javascript:","");
eval(s);
}
//Click a button to change the hash
$("#buttons li a").click(function(){
$("#buttons li a").removeClass('selected');
$(this).addClass('selected');
document.location.hash=$(this).attr("id")
//return false;
});
});
I had hoped the return false; would stop the page from scrolling - but it just makes the link not work at all. So that's just commented out for now so I can navigate.
Any ideas?
Use history.replaceState or history.pushState* to change the hash. This will not trigger the jump to the associated element.
Example
$(document).on('click', 'a[href^=#]', function(event) {
event.preventDefault();
history.pushState({}, '', this.href);
});
Demo on JSFiddle
* If you want history forward and backward support
History behaviour
If you are using history.pushState and you don't want page scrolling when the user uses the history buttons of the browser (forward/backward) check out the experimental scrollRestoration setting (Chrome 46+ only).
history.scrollRestoration = 'manual';
spec
info
Browser Support
replaceState
pushState
polyfill
Step 1: You need to defuse the node ID, until the hash has been set. This is done by removing the ID off the node while the hash is being set, and then adding it back on.
hash = hash.replace( /^#/, '' );
var node = $( '#' + hash );
if ( node.length ) {
node.attr( 'id', '' );
}
document.location.hash = hash;
if ( node.length ) {
node.attr( 'id', hash );
}
Step 2: Some browsers will trigger the scroll based on where the ID'd node was last seen so you need to help them a little. You need to add an extra div to the top of the viewport, set its ID to the hash, and then roll everything back:
hash = hash.replace( /^#/, '' );
var fx, node = $( '#' + hash );
if ( node.length ) {
node.attr( 'id', '' );
fx = $( '<div></div>' )
.css({
position:'absolute',
visibility:'hidden',
top: $(document).scrollTop() + 'px'
})
.attr( 'id', hash )
.appendTo( document.body );
}
document.location.hash = hash;
if ( node.length ) {
fx.remove();
node.attr( 'id', hash );
}
Step 3: Wrap it in a plugin and use that instead of writing to location.hash...
I think I may have found a fairly simple solution. The problem is that the hash in the URL is also an element on the page that you get scrolled to. if I just prepend some text to the hash, now it no longer references an existing element!
$(function(){
//This emulates a click on the correct button on page load
if(document.location.hash){
$("#buttons li a").removeClass('selected');
s=$(document.location.hash.replace("btn_","")).addClass('selected').attr("href").replace("javascript:","");
eval(s);
}
//Click a button to change the hash
$("#buttons li a").click(function(){
$("#buttons li a").removeClass('selected');
$(this).addClass('selected');
document.location.hash="btn_"+$(this).attr("id")
//return false;
});
});
Now the URL appears as page.aspx#btn_elementID which is not a real ID on the page. I just remove "btn_" and get the actual element ID
I was recently building a carousel which relies on window.location.hash to maintain state and made the discovery that Chrome and webkit browsers will force scrolling (even to a non visible target) with an awkward jerk when the window.onhashchange event is fired.
Even attempting to register a handler which stops propogation:
$(window).on("hashchange", function(e) {
e.stopPropogation();
e.preventDefault();
});
Did nothing to stop the default browser behavior.
The solution I found was using window.history.pushState to change the hash without triggering the undesirable side-effects.
$("#buttons li a").click(function(){
var $self, id, oldUrl;
$self = $(this);
id = $self.attr('id');
$self.siblings().removeClass('selected'); // Don't re-query the DOM!
$self.addClass('selected');
if (window.history.pushState) {
oldUrl = window.location.toString();
// Update the address bar
window.history.pushState({}, '', '#' + id);
// Trigger a custom event which mimics hashchange
$(window).trigger('my.hashchange', [window.location.toString(), oldUrl]);
} else {
// Fallback for the poors browsers which do not have pushState
window.location.hash = id;
}
// prevents the default action of clicking on a link.
return false;
});
You can then listen for both the normal hashchange event and my.hashchange:
$(window).on('hashchange my.hashchange', function(e, newUrl, oldUrl){
// #todo - do something awesome!
});
A snippet of your original code:
$("#buttons li a").click(function(){
$("#buttons li a").removeClass('selected');
$(this).addClass('selected');
document.location.hash=$(this).attr("id")
});
Change this to:
$("#buttons li a").click(function(e){
// need to pass in "e", which is the actual click event
e.preventDefault();
// the preventDefault() function ... prevents the default action.
$("#buttons li a").removeClass('selected');
$(this).addClass('selected');
document.location.hash=$(this).attr("id")
});
Okay, this is a rather old topic but I thought I'd chip in as the 'correct' answer doesn't work well with CSS.
This solution basically prevents the click event from moving the page so we can get the scroll position first. Then we manually add the hash and the browser automatically triggers a hashchange event. We capture the hashchange event and scroll back to the correct position. A callback separates and prevents your code causing a delay by keeping your hash hacking in one place.
var hashThis = function( $elem, callback ){
var scrollLocation;
$( $elem ).on( "click", function( event ){
event.preventDefault();
scrollLocation = $( window ).scrollTop();
window.location.hash = $( event.target ).attr('href').substr(1);
});
$( window ).on( "hashchange", function( event ){
$( window ).scrollTop( scrollLocation );
if( typeof callback === "function" ){
callback();
}
});
}
hashThis( $( ".myAnchor" ), function(){
// do something useful!
});
Adding this here because the more relevant questions have all been marked as duplicates pointing here…
My situation is simpler:
user clicks the link (a[href='#something'])
click handler does: e.preventDefault()
smoothscroll function: $("html,body").stop(true,true).animate({ "scrollTop": linkoffset.top }, scrollspeed, "swing" );
then window.location = link;
This way, the scroll occurs, and there's no jump when the location is updated.
Erm I have a somewhat crude but definitely working method.
Just store the current scroll position in a temp variable and then reset it after changing the hash. :)
So for the original example:
$("#buttons li a").click(function(){
$("#buttons li a").removeClass('selected');
$(this).addClass('selected');
var scrollPos = $(document).scrollTop();
document.location.hash=$(this).attr("id")
$(document).scrollTop(scrollPos);
});
I don't think this is possible. As far as I know, the only time a browser doesn't scroll to a changed document.location.hash is if the hash doesn't exist within the page.
This article isn't directly related to your question, but it discusses typical browser behavior of changing document.location.hash
if you use hashchange event with hash parser, you can prevent default action on links and change location.hash adding one character to have difference with id property of an element
$('a[href^=#]').on('click', function(e){
e.preventDefault();
location.hash = $(this).attr('href')+'/';
});
$(window).on('hashchange', function(){
var a = /^#?chapter(\d+)-section(\d+)\/?$/i.exec(location.hash);
});
Save scroll position before changing url fragment.
Change url fragment.
Restore old scroll position.
let oldScrollPosition = window.scrollY;
window.location.hash = addressFragment;
window.scrollTo(0, oldScrollPosition);
It's fast, so client won't notice anything.
The other way to do this is to add a div that's hidden at the top of the viewport. This div is then assigned the id of the hash before the hash is added to the url....so then you don't get a scroll.
Here's my solution for history-enabled tabs:
var tabContainer = $(".tabs"),
tabsContent = tabContainer.find(".tabsection").hide(),
tabNav = $(".tab-nav"), tabs = tabNav.find("a").on("click", function (e) {
e.preventDefault();
var href = this.href.split("#")[1]; //mydiv
var target = "#" + href; //#myDiv
tabs.each(function() {
$(this)[0].className = ""; //reset class names
});
tabsContent.hide();
$(this).addClass("active");
var $target = $(target).show();
if ($target.length === 0) {
console.log("Could not find associated tab content for " + target);
}
$target.removeAttr("id");
// TODO: You could add smooth scroll to element
document.location.hash = target;
$target.attr("id", href);
return false;
});
And to show the last-selected tab:
var currentHashURL = document.location.hash;
if (currentHashURL != "") { //a tab was set in hash earlier
// show selected
$(currentHashURL).show();
}
else { //default to show first tab
tabsContent.first().show();
}
// Now set the tab to active
tabs.filter("[href*='" + currentHashURL + "']").addClass("active");
Note the *= on the filter call. This is a jQuery-specific thing, and without it, your history-enabled tabs will fail.
This solution creates a div at the actual scrollTop and removes it after changing hash:
$('#menu a').on('click',function(){
//your anchor event here
var href = $(this).attr('href');
window.location.hash = href;
if(window.location.hash == href)return false;
var $jumpTo = $('body').find(href);
$('body').append(
$('<div>')
.attr('id',$jumpTo.attr('id'))
.addClass('fakeDivForHash')
.data('realElementForHash',$jumpTo.removeAttr('id'))
.css({'position':'absolute','top':$(window).scrollTop()})
);
window.location.hash = href;
});
$(window).on('hashchange', function(){
var $fakeDiv = $('.fakeDivForHash');
if(!$fakeDiv.length)return true;
$fakeDiv.data('realElementForHash').attr('id',$fakeDiv.attr('id'));
$fakeDiv.remove();
});
optional, triggering anchor event at page load:
$('#menu a[href='+window.location.hash+']').click();
I have a simpler method that works for me. Basically, remember what the hash actually is in HTML. It's an anchor link to a Name tag. That's why it scrolls...the browser is attempting to scroll to an anchor link. So, give it one!
Right under the BODY tag, put your version of this:
<a name="home"></a><a name="firstsection"></a><a name="secondsection"></a><a name="thirdsection"></a>
Name your section divs with classes instead of IDs.
In your processing code, strip off the hash mark and replace with a dot:
var trimPanel = loadhash.substring(1); //lose the hash
var dotSelect = '.' + trimPanel; //replace hash with dot
$(dotSelect).addClass("activepanel").show(); //show the div associated with the hash.
Finally, remove element.preventDefault or return: false and allow the nav to happen. The window will stay at the top, the hash will be appended to the address bar url, and the correct panel will open.
I think you need to reset scroll to its position before hashchange.
$(function(){
//This emulates a click on the correct button on page load
if(document.location.hash) {
$("#buttons li a").removeClass('selected');
s=$(document.location.hash).addClass('selected').attr("href").replace("javascript:","");
eval(s);
}
//Click a button to change the hash
$("#buttons li a").click(function() {
var scrollLocation = $(window).scrollTop();
$("#buttons li a").removeClass('selected');
$(this).addClass('selected');
document.location.hash = $(this).attr("id");
$(window).scrollTop( scrollLocation );
});
});
If on your page you use id as sort of an anchor point, and you have scenarios where you want to have users to append #something to the end of the url and have the page scroll to that #something section by using your own defined animated javascript function, hashchange event listener will not be able to do that.
If you simply put a debugger immediate after hashchange event, for example, something like this(well, I use jquery, but you get the point):
$(window).on('hashchange', function(){debugger});
You will notice that as soon as you change your url and hit the enter button, the page stops at the corresponding section immediately, only after that, your own defined scrolling function will get triggered, and it sort of scrolls to that section, which looks very bad.
My suggestion is:
do not use id as your anchor point to the section you want to scroll to.
If you must use ID, like I do. Use 'popstate' event listener instead, it will not automatically scroll to the very section you append to the url, instead, you can call your own defined function inside the popstate event.
$(window).on('popstate', function(){myscrollfunction()});
Finally you need to do a bit trick in your own defined scrolling function:
let hash = window.location.hash.replace(/^#/, '');
let node = $('#' + hash);
if (node.length) {
node.attr('id', '');
}
if (node.length) {
node.attr('id', hash);
}
delete id on your tag and reset it.
This should do the trick.
This worked for me using replaceState:
$('a[href^="#"]').click(function(){
history.replaceState({}, '', location.toString().replace(/#.*$/, '') + $(this).attr('href'));
});
Only add this code into jQuery on document ready
Ref : http://css-tricks.com/snippets/jquery/smooth-scrolling/
$(function() {
$('a[href*=#]:not([href=#])').click(function() {
if (location.pathname.replace(/^\//,'') == this.pathname.replace(/^\//,'') && location.hostname == this.hostname) {
var target = $(this.hash);
target = target.length ? target : $('[name=' + this.hash.slice(1) +']');
if (target.length) {
$('html,body').animate({
scrollTop: target.offset().top
}, 1000);
return false;
}
}
});
});