I am creating a UI, in which user can add / delete items (of similar layout).
It starts with one item and you can click 'add' to add more. The UI consists of several different types of items.
What I am doing currently is populating a single item item 1 ( of each type ) and on add event, I clone the item 1, replace the changes done by user in item 1 and append the clone to the container.
In simple words, instead of dynamically creating html with jQuery, I am cloning html of a div. But in this approach , I had to change a lot of things to keep to give the new item to initial state.
So, I want to avoid the replacing the edits done by user, so I was thinking something like below,
<script type="text/template" id="item_type1">
<div>
<div>Box</div>
</div>
</script>
<script type="text/template" id="item_type2">
<div>
<div>Box2</div>
</div>
</script>
And on add event, I want to do something like $('#item_type1').html() and $('#item_type2') to create new items.
I know there are sophisticated libraries like handlebar and mustache and underscore has its own way of implementing templates.
But I am not using any of these already and thus do not want to included them just to copy content. I dont want anything special. I am not passing variables. I am just cloning some markup to use again and again.
Is this way to insert html in script tags , going to work in all browsers ? and is it a good way ?
EDIT:
Its for the wp plugin and I assume js is turned on , else the plugin wont work anyways.
What about:
Your HTML should be, for example:
<script type="text/template" id="item_type1">
<div>
<h1>Box1</h1>
<p>
</p>
</div>
</script>
And your code would be:
var templateHtml = $('#item_type1').html();
var $item = $(templateHtml);
$('body').append($item);
$item.on('click', function() {});
This is an easy way that will work on all browsers.
Step 1: Create an HTML file with your template inside of it
Step 2: Using jQuery's load() method, call your HTML template into a div element in the main HTML file:
$("#main-div").load("yourtemplate.html")
Step 3: Be amazed
Is this a good idea? It depends:
If it's a self contained application on a known environment with a determined supported browser and with equally determined settings (like if JavaScript is on or not) then yea, sure. Why not?
If it's open to the public in every single browser possible with many different configurations, then no, it's a horrible idea. If your user doesn't have JavaScript enabled, then your content doesn't show up. Also, if one of your scripts break in production, then you are again left with no content. You can learn this lesson from when Gawker made this same mistake
I want to give a static javascript block of code to a html template designer, which can be:
either inline or external or both
used once or more in the html template
and each block can determine its position in the template relative to the other javascript code blocks.
An example could be image banners served using javascript. I give code to template designer who places it in two places, once for a horizontal banner in the header and once for a vertical banner. The same code runs in both blocks but knowing their positions can determine if to serve a horizontal or a vertical image banner.
Make sense?
Another example: Say you have the same 2 javascript tags in a web page calling an external script on a server. Can the server and/or scripts determine which javascript tag it belongs to?
NOTE: Can we say this is a challenge? I know that I can avoid this puzzle very easily but I come across this on a regular basis.
JavaScript code can locate all <script> elements on the page and it can probably examine the attributes and the content to check from which element it came from. But that's probably not what you want.
What you want is a piece of JavaScript which replaces tags on the page with ad banners. The usual solution is to add a special element, say a IMG, for this and give that IMG an id or a class or maybe even a custom attribute (like adtype="vertical") and then use JavaScript to locate these elements and replace the content by changing the src attribute.
For example, using jQuery, you can should your images like so:
<img src="empty.gif" width="..." height="..." class="ad" adtype="..." />
Then you can locate each image with
$('img.ad')
[EDIT] Well, the server obviously knows which script belongs into which script tag because it inserts the script. So this is a no-brainer.
If the script wants to find out where it is in the DOM, add something which it can use to identify itself, say:
<script>var id= '329573485745';
Then you can walk all script tags and check which one contains the value of the variable id.
If you call an external script, then you can do the same but you must add the ID to the script tag as you emit the HTML:
<script id="329573485745" src="..." />
Then the external script can examine the DOM and lookup the element with this id. You will want to use an UUID for this, btw.
This way, a piece of JS can locate the script tag which added itself to the page.
Best thing would probably be to make an insert once function, and then have him insert only the function call where needed.
Like this:
timescalled=0
function buildad(){
var toinsert="" //Code to generate the desired piece of HTML
document.write(toinsert)
timescalled+=1 //So you can tell how many times the function have been called
}
Now a script block calling the function can simply be inserted wherever a banner is needed
<script type="text/javascript">buildad()</script>
Thanks for the tips everyone but I'll be answering my own question.
I figured out several ways of accomplishing the task and I give you the one which works nicely and is easy to understand.
The following chunk of code relies on outputting dummy divs and jQuery.
<script>
// Unique identifier for all dummy divs
var rnd1="_0xDEFEC8ED_";
// Unique identifier for this dummy div
var rnd2=Math.floor(Math.random()*999999);
// The dummy div
var d="<div class='"+rnd1+" "+rnd2+"'></div>";
// Script which :
// Calculates index of THIS dummy div
// Total dummy divs
// Outputs to dummy div for debugging
var f1="<script>$(document).ready(function(){";
var f2="var i=$('."+rnd1+"').index($('."+rnd2+"'))+1;";
var f3="var t=$('."+rnd1+"').length;";
var f4="$('."+rnd2+"').html(i+' / '+t);";
var f5="});<\/script>";
document.write(d+f1+f2+f3+f4+f5);
</script>
Why not not just place the function call on the page instead of the entire code block? This way you can pass in a parameter to tell it what type of advertisement is needed?
BuildAd('Tower');
BuildAd('Banner');
Javascript itself has no clue of it's position in a page. You have to target a control on the page to get it's location.
I don't think it is possible for JavaScript code to know where it was loaded from. It certainly doesn't run at the point it is found, since execution isn't directly tied to the loading process (code usually runs after the whole DOM is loaded). In fact, in the case of externals, it doesn't even make sense, since only one copy of the code will be loaded no matter how many times it is encountered.
It shouldn't be the same code for each banner - there will be a parameter passed to whatever is serving the image banner which will specify the intended size.
Can you give a specific example of what you need this for?
To edit for your recent example: The simple answer is no. I could help you approach the problem from a different direction if you post details of your problem
The term "static block of code" leaves a lot of room for interpretation.
Inline scripts (e.g., ones that rely on document.write and so must be parsed and executed during the HTML parsing phase) cannot tell where they are in the DOM at runtime. You have to tell them (as in one of the first answers you got).
I think you'll probably find that you need to change your approach.
A common way to keep code and markup separate (which is useful when providing tools to HTML designers who aren't coders) is to have them use a script tag like so:
<script defer async type='text/javascript' src='pagestuff.js'></script>
...which then triggers itself when the page is loaded (using window.onload if necessary, but there are several techniques for being triggered earlier than that, which you want because window.onload doesn't trigger until the images have all loaded).
That script then looks for markers in the markup and manipulates the page accordingly. For instance (this example uses Prototype, but you can do the same with raw JavaScript, jQuery, Closure, etc.):
document.observe("dom:loaded", initPage);
function initPage() {
var verticals = $$('div.vertical');
/* ...do something with the array of "vertical" divs in `verticals`,
such as: */
var index;
for (index = 0; index < verticals.length; ++index) {
vertical.update("I'm vertical #" + index);
}
}
The designers can then have blocks on the page that are filled in by code which they flag up in a way that's normal for them (classes or attributes, etc.). The code figures out what it should do based on the classes/attributes of the blocks it finds when it runs.
I'm making a page which has some interaction provided by javascript. Just as an example: links which send an AJAX request to get the content of articles and then display that data in a div. Obviously in this example, I need each link to store an extra bit of information: the id of the article. The way I've been handling it in case was to put that information in the href link this:
<a class="article" href="#5">
I then use jQuery to find the a.article elements and attach the appropriate event handler. (don't get too hung up on the usability or semantics here, it's just an example)
Anyway, this method works, but it smells a bit, and isn't extensible at all (what happens if the click function has more than one parameter? what if some of those parameters are optional?)
The immediately obvious answer was to use attributes on the element. I mean, that's what they're for, right? (Kind of).
<a articleid="5" href="link/for/non-js-users.html">
In my recent question I asked if this method was valid, and it turns out that short of defining my own DTD (I don't), then no, it's not valid or reliable. A common response was to put the data into the class attribute (though that might have been because of my poorly-chosen example), but to me, this smells even more. Yes it's technically valid, but it's not a great solution.
Another method I'd used in the past was to actually generate some JS and insert it into the page in a <script> tag, creating a struct which would associate with the object.
var myData = {
link0 : {
articleId : 5,
target : '#showMessage'
// etc...
},
link1 : {
articleId : 13
}
};
<a href="..." id="link0">
But this can be a real pain in butt to maintain and is generally just very messy.
So, to get to the question, how do you store arbitrary pieces of information for HTML tags?
Which version of HTML are you using?
In HTML 5, it is totally valid to have custom attributes prefixed with data-, e.g.
<div data-internalid="1337"></div>
In XHTML, this is not really valid. If you are in XHTML 1.1 mode, the browser will probably complain about it, but in 1.0 mode, most browsers will just silently ignore it.
If I were you, I would follow the script based approach. You could make it automatically generated on server side so that it's not a pain in the back to maintain.
If you are using jQuery already then you should leverage the "data" method which is the recommended method for storing arbitrary data on a dom element with jQuery.
To store something:
$('#myElId').data('nameYourData', { foo: 'bar' });
To retrieve data:
var myData = $('#myElId').data('nameYourData');
That is all that there is to it but take a look at the jQuery documentation for more info/examples.
Just another way, I personally wouldn't use this but it works (assure your JSON is valid because eval() is dangerous).
<a class="article" href="link/for/non-js-users.html">
<span style="display: none;">{"id": 1, "title":"Something"}</span>
Text of Link
</a>
// javascript
var article = document.getElementsByClassName("article")[0];
var data = eval(article.childNodes[0].innerHTML);
Arbitrary attributes are not valid, but are perfectly reliable in modern browsers. If you are setting the properties via javascript, than you don't have to worry about validation as well.
An alternative is to set attributes in javascript. jQuery has a nice utility method just for that purpose, or you can roll your own.
A hack that's going to work with pretty much every possible browser is to use open classes like this: <a class='data\_articleid\_5' href="link/for/non-js-users.html>;
This is not all that elegant to the purists, but it's universally supported, standard-compliant, and very easy to manipulate. It really seems like the best possible method. If you serialize, modify, copy your tags, or do pretty much anything else, data will stay attached, copied etc.
The only problem is that you cannot store non-serializable objects that way, and there might be limits if you put something really huge there.
A second way is to use fake attributes like: <a articleid='5' href="link/for/non-js-users.html">
This is more elegant, but breaks standard, and I'm not 100% sure about support. Many browsers support it fully, I think IE6 supports JS access for it but not CSS selectors (which doesn't really matter here), maybe some browsers will be completely confused, you need to check it.
Doing funny things like serializing and deserializing would be even more dangerous.
Using ids to pure JS hash mostly works, except when you try to copy your tags. If you have tag <a href="..." id="link0">, copy it via standard JS methods, and then try to modify data attached to just one copy, the other copy will be modified.
It's not a problem if you don't copy tags, or use read only data. If you copy tags and they're modified you'll need to handle that manually.
Using jquery,
to store: $('#element_id').data('extra_tag', 'extra_info');
to retrieve: $('#element_id').data('extra_tag');
I know that you're currently using jQuery, but what if you defined the onclick handler inline. Then you could do:
<a href='/link/for/non-js-users.htm' onclick='loadContent(5);return false;'>
Article 5</a>
You could use hidden input tags. I get no validation errors at w3.org with this:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html lang='en' xml:lang='en' xmlns='http://www.w3.org/1999/xhtml'>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="content-type" />
<title>Hello</title>
</head>
<body>
<div>
<a class="article" href="link/for/non-js-users.html">
<input style="display: none" name="articleid" type="hidden" value="5" />
</a>
</div>
</body>
</html>
With jQuery you'd get the article ID with something like (not tested):
$('.article input[name=articleid]').val();
But I'd recommend HTML5 if that is an option.
Why not make use of the meaningful data already there, instead of adding arbitrary data?
i.e. use <a href="/articles/5/page-title" class="article-link">, and then you can programmatically get all article links on the page (via the classname) and the article ID (matching the regex /articles\/(\d+)/ against this.href).
As a jQuery user I would use the Metadata plugin. The HTML looks clean, it validates, and you can embed anything that can be described using JSON notation.
This is good advice. Thanks to #Prestaul
If you are using jQuery already then you should leverage the "data"
method which is the recommended method for storing arbitrary data on a
dom element with jQuery.
Very true, but what if you want to store arbitrary data in plain-old HTML? Here's yet another alternative...
<input type="hidden" name="whatever" value="foobar"/>
Put your data in the name and value attributes of a hidden input element. This might be useful if the server is generating HTML (i.e. a PHP script or whatever), and your JavaScript code is going to use this information later.
Admittedly, not the cleanest, but it's an alternative. It's compatible with all
browsers and is valid XHTML. You should NOT use custom attributes, nor should you really use attributes with the 'data-' prefix, as it might not work on all browsers. And, in addition, your document will not pass W3C validation.
As long as you're actual work is done serverside, why would you need custom information in the html tags in the output anyway? all you need to know back on the server is an index into whatever kind of list of structures with your custom info. I think you're looking to store the information in the wrong place.
I will recognize, however unfortunate, that in lots of cases the right solution isn't the right solution. In which case I would strongly suggest generating some javascript to hold the extra information.
Many years later:
This question was posted roughly three years before data-... attributes became a valid option with the advent of html 5 so the truth has shifted and the original answer I gave is no longer relevant. Now I'd suggest to use data attributes instead.
<a data-articleId="5" href="link/for/non-js-users.html">
<script>
let anchors = document.getElementsByTagName('a');
for (let anchor of anchors) {
let articleId = anchor.dataset.articleId;
}
</script>
I advocate use of the "rel" attribute. The XHTML validates, the attribute itself is rarely used, and the data is efficiently retrieved.
So there should be four choices to do so:
Put the data in the id attribute.
Put the data in the arbitrary attribute
Put the data in class attribute
Put your data in another tag
http://www.shanison.com/?p=321
You could use the data- prefix of your own made attribute of a random element (<span data-randomname="Data goes here..."></span>), but this is only valid in HTML5. Thus browsers may complain about validity.
You could also use a <span style="display: none;">Data goes here...</span> tag. But this way you can not use the attribute functions, and if css and js is turned off, this is not really a neat solution either.
But what I personally prefer is the following:
<input type="hidden" title="Your key..." value="Your value..." />
The input will in all cases be hidden, the attributes are completely valid, and it will not get sent if it is within a <form> tag, since it has not got any name, right?
Above all, the attributes are really easy to remember and the code looks nice and easy to understand. You could even put an ID-attribute in it, so you can easily access it with JavaScript as well, and access the key-value pair with input.title; input.value.
One possibility might be:
Create a new div to hold all the extended/arbitrary data
Do something to ensure that this div is invisible (e.g. CSS plus a class attribute of the div)
Put the extended/arbitrary data within [X]HTML tags (e.g. as text within cells of a table, or anything else you might like) within this invisible div
Another approach can be to store a key:value pair as a simple class using the following syntax :
<div id="my_div" class="foo:'bar'">...</div>
This is valid and can easily be retrieved with jQuery selectors or a custom made function.
In html, we can store custom attributes with the prefix 'data-' before the attribute name like
<p data-animal='dog'>This animal is a dog.</p>.
Check documentation
We can use this property to dynamically set and get attributes using jQuery like:
If we have a p tag like
<p id='animal'>This animal is a dog.</p>
Then to create an attribute called 'breed' for the above tag, we can write:
$('#animal').attr('data-breed', 'pug');
To retrieve the data anytime, we can write:
var breedtype = $('#animal').data('breed');
At my previous employer, we used custom HTML tags all the time to hold info about the form elements. The catch: We knew that the user was forced to use IE.
It didn't work well for FireFox at the time. I don't know if FireFox has changed this or not, but be aware that adding your own attributes to HTML elements may or may-not be supported by your reader's browser.
If you can control which browser your reader is using (i.e. an internal web applet for a corporation), then by all means, try it. What can it hurt, right?
This is how I do you ajax pages... its a pretty easy method...
function ajax_urls() {
var objApps= ['ads','user'];
$("a.ajx").each(function(){
var url = $(this).attr('href');
for ( var i=0;i< objApps.length;i++ ) {
if (url.indexOf("/"+objApps[i]+"/")>-1) {
$(this).attr("href",url.replace("/"+objApps[i]+"/","/"+objApps[i]+"/#p="));
}
}
});
}
How this works is it basically looks at all URLs that have the class 'ajx' and it replaces a keyword and adds the # sign... so if js is turned off then the urls would act as they normally do... all "apps" (each section of the site) has its own keyword... so all i need to do is add to the js array above to add more pages...
So for example my current settings are set to:
var objApps= ['ads','user'];
So if i have a url such as:
www.domain.com/ads/3923/bla/dada/bla
the js script would replace the /ads/ part so my URL would end up being
www.domain.com/ads/#p=3923/bla/dada/bla
Then I use jquery bbq plugin to load the page accordingly...
http://benalman.com/projects/jquery-bbq-plugin/
I have found the metadata plugin to be an excellent solution to the problem of storing arbitrary data with the html tag in a way that makes it easy to retrieve and use with jQuery.
Important: The actual file you include is is only 5 kb and not 37 kb (which is the size of the complete download package)
Here is an example of it being used to store values I use when generating a google analytics tracking event (note: data.label and data.value happen to be optional params)
$(function () {
$.each($(".ga-event"), function (index, value) {
$(value).click(function () {
var data = $(value).metadata();
if (data.label && data.value) {
_gaq.push(['_trackEvent', data.category, data.action, data.label, data.value]);
} else if (data.label) {
_gaq.push(['_trackEvent', data.category, data.action, data.label]);
} else {
_gaq.push(['_trackEvent', data.category, data.action]);
}
});
});
});
<input class="ga-event {category:'button', action:'click', label:'test', value:99}" type="button" value="Test"/>
My answer might not apply to your case. I needed to store a 2D table in HTML, and i needed to do with fewest possible keystrokes. Here's my data in HTML:
<span hidden id="my-data">
IMG,,LINK,,CAPTION
mypic.jpg,,khangssite.com,,Khang Le
funnypic.jpg,,samssite.com,,Smith, Sam
sadpic.png,,joyssite.com,,Joy Jones
sue.jpg,,suessite.com,,Sue Sneed
dog.jpg,,dogssite.com,,Brown Dog
cat.jpg,,catssite.com,,Black Cat
</span>
Explanation
It's hidden using hidden attribute. No CSS needed.
This is processed by Javascript. I use two split statements, first on newline, then on double-comma delimiter. That puts the whole thing into a 2D array.
I wanted to minimize typing. I didn't want to redundantly retype the fieldnames on every row (json/jso style), so i just put the fieldnames on the first row. That a visual key for the programmer, and also used by Javascript to know the fieldnames. I eliminated all braces, brackets, equals, parens, etc. End-of-line is record delimiter.
I use double-commas as delimiters. I figured no one would normally use double-commas for anything, and they're easy to type. Beware, programmer must enter a space for any empty cells, to prevent unintended double-commas. The programmer can easily use a different delimiter if they prefer, as long as they update the Javascript. You can use single-commas if you're sure there will be no embedded commas within a cell.
It's a span to ensure it takes up no room on the page.
Here's the Javascript:
// pull 2D text-data into array
let sRawData = document.querySelector("#my-data").innerHTML.trim();
// get headers from first row of data and load to array. Trim and split.
const headersEnd = sRawData.indexOf("\n");
const headers = sRawData.slice(0, headersEnd).trim().split(",,");
// load remaining rows to array. Trim and split.
const aRows = sRawData.slice(headersEnd).trim().split("\n");
// trim and split columns
const data = aRows.map((element) => {
return element.trim().split(",,");
});
Explanation:
JS uses lots of trims to get rid of any extra whitespace.