So I'm having a slight problem with producing production ready scripts for my project. I'm using gulp to concatenate and minify my css and js, and while the css is working fine the gulp js function isn't generating my final file. Please refer to my code below:
gulp.task('js', function() {
return gulp.src([source + 'js/app/**/*.js'])
.pipe(concat('development.js'))
.pipe(gulp.dest(source + 'js'))
.pipe(rename({
basename: 'production',
suffix: '-min',
}))
.pipe(uglify())
.pipe(gulp.dest(source + 'js/'))
.pipe(notify({ message: 'Scripts task complete', onLast: true }));
});
If anyone has encountered a similar problem or has any tips it would be much appreciated :)
There is nothing wrong with your gulpfile. I tested it and it works perfectly.
The only thing I can guess is that your source is not set correctly. Did you forget the trailing slash '/' ?
I would suggest 2 things to figure it out. Include node path library to check where source is actually pointing to like this:
var path = require('path');
// in gulp task ...
path.resolve(path.resolve(source + 'js/app'));
Make sure it points where you think it does.
Secondly, you could use gulp-debug to establish that any files are found:
npm install gulp-debug
Then
var debug = require('gulp-debug');
// in gulp task ...
return gulp.src([source + 'js/app/**/*.js'])
.pipe(concat('development.js'))
.pipe(debug())
.pipe(gulp.dest(source + 'js'))
.pipe(debug())
// etc.
Good luck!
Based on additional infomation in the comments I realise you are generating JS files in a separate process ...
gulp is asynchronous by default. What this boils down to is that all functions try to run at the same time - if you want a specific order it must be by design. This is great because it's very fast but can be a headache to work with.
Problem
Here is what's basically happening:
// SOME TASK THAT SHOULD BE RUN FIRST
gulp.task('copy-vendor-files-to-tempfolder', function (done) {
// copy files to vendor folder
done()
})
// SOME TASKS THAT DEPEND ON FIRST TASK
gulp.task('complile-styles', function () { /* independent task */ })
gulp.task('concat-vendor-files', function () { /* concat files in vendor folder. depends on vendor files existing */ })
// GENERAL TASK WHICH STARTS OTHERS
gulp.task('ready', ['copy-vendor-files-to-tempfolder', 'compile-styles', 'concat-vendor-files])
When you try to run:
$ gulp ready
GULP TASK WILL FAIL! Folder is being created at the same time!!
NOWHERE TO COPY FILES!
Solution
There are many solutions but the following module has come in handy for me again and again:
npm install run-sequence
Then in your gulpfile.js:
var runSequence = require('run-sequence')
gulp.task('ready', function (done) {
runSequence(
'create-folders', // do this first,
[
'copy-css-files',
'copy-html-files'
], // do these AFTER but in parallel
done // callback when ready
)
})
This will guarantee the folder exists when you try to run the other functions.
In your specific case, you should make sure the task that concatenates the JS files is run after the task that copies them out of vendor.
Note: I'm leaving other answer because it contains useful help for debugging similar issues.
HTH!
Using Gulp to streamline my build process on a per-save basis, while eliminating the need for "temp" files is my goal (and why I chose to use Gulp over Grunt)
I've recently discovered that, apparently, the coffeescript compiler cannot handle dealing with basic Javascript as a source
So this, errors out:
gulp.task('scripts', function() {
var stream =
gulp.src([
"bower_components/d3/d3.js",
"bower_components/angular/angular.js",
"bower_components/foundation/js/foundation.js",
"public-dev/scripts/app.js",
"public-dev/scripts/**/*.js",
"public-dev/scripts/**/*.coffee"
])
.pipe(coffee())
.pipe(concat('compiled.js'))
.pipe(gulp.dest('./public/scripts'))
;
return stream;
});
This produces the output/errpr:
[11:58:51] Starting 'scripts'...
events.js:72
throw er; // Unhandled 'error' event
^
/var/www/node.fortiguard.dev/bower_components/d3/d3.js:1:2: error: reserved word "function"
!function() {
^
How should I set this up, without again creating any temp files?
What I liked about the LESS compiler, is that it can still be fed straight CSS files and it'd be fine. I was kind of hoping the Coffee compiler would react the same way
I use gulp-add-src to do that.
var gulp = require('gulp'),
coffee = require('gulp-coffee'),
concat = require('gulp-concat'),
addsrc = require('gulp-add-src');
// Scripts
gulp.task('coffee', function () {
return gulp.src('src/coffee/**/*.coffee')
.pipe(coffee())
.pipe(addsrc('src/coffee/lib/*.js'))
.pipe(concat('compiled.js'))
.pipe(gulp.dest('dist'));
});
Sadly, it doesn't. What you can do, is using the underlying event-stream's merge method. Then you'll have one pipeline for the coffee files that gets compiled and one for the javascript side.
Here is an example Gulpfile.coffee:
coffee = require 'gulp-coffee'
es = require 'event-stream'
gulp.task 'scripts', () ->
es.merge(
gulp.src(["public-dev/app.js", "public-dev/scripts/**/*.js"]) # ...
gulp.src("public-dev/**/*.coffee").pipe coffee()
)
.pipe concat 'all.js'
.pipe gulp.dest "build"
I marked Patrick J. S.'s answer as "Correct" becuase in reality, this is exactly what I needed to do.
That said, "event-stream" isn't what I ended up going with, simply because I needed to preserve my dependency structure of files, and event-stream's merge() method does not preserver order nor does it have options to.
Instead I opted for a package called streamqueue, which does preserve order of glob. Probably slower, but order matters in my app unfortunately. In the future I will try to be as modular as possible.
I'm watching for changes on files like this:
gulp.watch(['./src/js/**/*', './src/templates/**/*', config.vendor.js], ['js']);
Part of my build process involves using the "angular-filesort" module (don't think this is important though). If I implement the task as follows and use plumber, when filesort fails gulp doesn't quit and "watch" will keep checking for updates which is what I want:
gulp.task('js', function() {
gulp.src('./src/js/**/*.js').pipe(plumber()).pipe(angularFilesort());
});
However, if I wrap up this process in a streamqueue, gulp will exit when filesort fails which I don't want:
gulp.task('js', function() {
streamqueue({
objectMode: true
},
gulp.src('./src/js/**/*.js').pipe(plumber()).pipe(angularFilesort())
)
});
How can I fix this?
Specifically, I'm doing something like this to process 3 different sets of JavaScript files then concating them:
streamqueue({
objectMode: true
},
gulp.src(config.vendor.js),
gulp.src('./src/js/**/*.js').pipe(angularFilesort()),
gulp.src(['src/templates/**/*.html']).pipe(templateCache({
module: mainAngularModuleName
})))
.pipe(sourcemaps.init())
.pipe(concat('app.js'))
etc.
Is there perhaps a way I can do the above without streamqueue to work around this issue?
I had a similar issue and switching from streamqueue to stream-series resolved it for me. It's also cleaner than streamqueue because you don't need to specify the object mode.
I found reinstalling node and upgrading all my packages fixed this.
I have browserify bundling up files and it's working great. But what if I need to generate multiple bundles?
I would like to end up with dist/appBundle.js and dist/publicBundle.js
gulp.task("js", function(){
return browserify([
"./js/app.js",
"./js/public.js"
])
.bundle()
.pipe(source("bundle.js"))
.pipe(gulp.dest("./dist"));
});
Obviously this isn't going to work since I am only specifying one output (bundle.js). I can accomplish this by repeating the above statement like so (but it doesn't feel right, because of the repetition):
gulp.task("js", function(){
browserify([
"./js/app.js"
])
.bundle()
.pipe(source("appBundle.js"))
.pipe(gulp.dest("./dist"));
browserify([
"./js/public.js"
])
.bundle()
.pipe(source("publicBundle.js"))
.pipe(gulp.dest("./dist"));
});
Is there a better way to tackle this? Thanks!
I don't have a good environment to test this in right now, but my guess is that it would look something like:
gulp.task("js", function(){
var destDir = "./dist";
return browserify([
"./js/app.js",
"./js/public.js"
])
.bundle()
.pipe(source("appBundle.js"))
.pipe(gulp.dest(destDir))
.pipe(rename("publicBundle.js"))
.pipe(gulp.dest(destDir));
});
EDIT: I just realized I mis-read the question, there should be two separate bundles coming from two separate .js files. In light of that, the best alternative I can think of looks like:
gulp.task("js", function(){
var destDir = "./dist";
var bundleThis = function(srcArray) {
_.each(srcArray, function(source) {
var bundle = browserify(["./js/" + source + ".js"]).bundle();
bundle.pipe(source(source + "Bundle.js"))
.pipe(gulp.dest(destDir));
});
};
bundleThis(["app", "public"]);
});
gulp.task("js", function (done) {
[
"app",
"public",
].forEach(function (entry, i, entries) {
// Count remaining bundling operations to track
// when to call done(). Could alternatively use
// merge-stream and return its output.
entries.remaining = entries.remaining || entries.length;
browserify('./js/' + entry + '.js')
.bundle()
// If you need to use gulp plugins after bundling then you can
// pipe to vinyl-source-stream then gulp.dest() here instead
.pipe(
require('fs').createWriteStream('./dist/' + entry + 'Bundle.js')
.on('finish', function () {
if (! --entries.remaining) done();
})
);
});
});
This is similar to #urban_racoons answer, but with some improvements:
That answer will fail as soon as you want the task to be a dependency of another task in gulp 3, or part of a series in gulp 4. This answer uses a callback to signal task completion.
The JS can be simpler and doesn't require underscore.
This answer is based on the premise of having a known list of entry files for each bundle, as opposed to, say, needing to glob a list of entry files.
Multiple bundles with shared dependencies
I recently added support for multiple bundles with shared dependencies to https://github.com/greypants/gulp-starter
Here's the array of browserify config objects I pass to my browserify task. At the end of that task, I iterate over each config, browserifying all the things.
config.bundleConfigs.forEach(browserifyThis);
browserifyThis takes a bundleConfig object, and runs browserify (with watchify if dev mode).
This is the bit that sorts out shared dependencies:
// Sort out shared dependencies.
// b.require exposes modules externally
if(bundleConfig.require) b.require(bundleConfig.require)
// b.external excludes modules from the bundle, and expects
// they'll be available externally
if(bundleConfig.external) b.external(bundleConfig.external)
This browserify task also properly reports when all bundles are finished (the above example isn't returning streams or firing the task's callback), and uses watchify when in devMode for super fast recompiles.
Brian FitzGerald's last comment is spot on. Remember that it's just JavaScript!
Say, for example, you are building a project on Backbone or whatever and you need to load scripts in a certain order, e.g. underscore.js needs to be loaded before backbone.js.
How do I get it to concat the scripts so that they’re in order?
// JS concat, strip debugging and minify
gulp.task('scripts', function() {
gulp.src(['./source/js/*.js', './source/js/**/*.js'])
.pipe(concat('script.js'))
.pipe(stripDebug())
.pipe(uglify())
.pipe(gulp.dest('./build/js/'));
});
I have the right order of scripts in my source/index.html, but since files are organized by alphabetic order, gulp will concat underscore.js after backbone.js, and the order of the scripts in my source/index.html does not matter, it looks at the files in the directory.
So does anyone have an idea on this?
Best idea I have is to rename the vendor scripts with 1, 2, 3 to give them the proper order, but I am not sure if I like this.
As I learned more I found Browserify is a great solution, it can be a pain at first but it’s great.
I had a similar problem recently with Grunt when building my AngularJS app. Here's a question I posted.
What I ended up doing is to explicitly list the files in order in the grunt config. The config file will then look like this:
[
'/path/to/app.js',
'/path/to/mymodule/mymodule.js',
'/path/to/mymodule/mymodule/*.js'
]
Grunt is able to figure out which files are duplicates and not include them. The same technique will work with Gulp as well.
Another thing that helps if you need some files to come after a blob of files, is to exclude specific files from your glob, like so:
[
'/src/**/!(foobar)*.js', // all files that end in .js EXCEPT foobar*.js
'/src/js/foobar.js',
]
You can combine this with specifying files that need to come first as explained in Chad Johnson's answer.
I have used the gulp-order plugin but it is not always successful as you can see by my stack overflow post gulp-order node module with merged streams. When browsing through the Gulp docs I came across the streamque module which has worked quite well for specifying order of in my case concatenation. https://github.com/gulpjs/gulp/blob/master/docs/recipes/using-multiple-sources-in-one-task.md
Example of how I used it is below
var gulp = require('gulp');
var concat = require('gulp-concat');
var handleErrors = require('../util/handleErrors');
var streamqueue = require('streamqueue');
gulp.task('scripts', function() {
return streamqueue({ objectMode: true },
gulp.src('./public/angular/config/*.js'),
gulp.src('./public/angular/services/**/*.js'),
gulp.src('./public/angular/modules/**/*.js'),
gulp.src('./public/angular/primitives/**/*.js'),
gulp.src('./public/js/**/*.js')
)
.pipe(concat('app.js'))
.pipe(gulp.dest('./public/build/js'))
.on('error', handleErrors);
});
With gulp-useref you can concatenate every script declared in your index file, in the order in which you declare it.
https://www.npmjs.com/package/gulp-useref
var $ = require('gulp-load-plugins')();
gulp.task('jsbuild', function () {
var assets = $.useref.assets({searchPath: '{.tmp,app}'});
return gulp.src('app/**/*.html')
.pipe(assets)
.pipe($.if('*.js', $.uglify({preserveComments: 'some'})))
.pipe(gulp.dest('dist'))
.pipe($.size({title: 'html'}));
});
And in the HTML you have to declare the name of the build file you want to generate, like this:
<!-- build:js js/main.min.js -->
<script src="js/vendor/vendor.js"></script>
<script src="js/modules/test.js"></script>
<script src="js/main.js"></script>
In your build directory you will have the reference to main.min.js which will contain vendor.js, test.js, and main.js
The sort-stream may also be used to ensure specific order of files with gulp.src. Sample code that puts the backbone.js always as the last file to process:
var gulp = require('gulp');
var sort = require('sort-stream');
gulp.task('scripts', function() {
gulp.src(['./source/js/*.js', './source/js/**/*.js'])
.pipe(sort(function(a, b){
aScore = a.path.match(/backbone.js$/) ? 1 : 0;
bScore = b.path.match(/backbone.js$/) ? 1 : 0;
return aScore - bScore;
}))
.pipe(concat('script.js'))
.pipe(stripDebug())
.pipe(uglify())
.pipe(gulp.dest('./build/js/'));
});
I just add numbers to the beginning of file name:
0_normalize.scss
1_tikitaka.scss
main.scss
It works in gulp without any problems.
I have my scripts organized in different folders for each package I pull in from bower, plus my own script for my app. Since you are going to list the order of these scripts somewhere, why not just list them in your gulp file? For new developers on your project, it's nice that all your script end-points are listed here. You can do this with gulp-add-src:
gulpfile.js
var gulp = require('gulp'),
less = require('gulp-less'),
minifyCSS = require('gulp-minify-css'),
uglify = require('gulp-uglify'),
concat = require('gulp-concat'),
addsrc = require('gulp-add-src'),
sourcemaps = require('gulp-sourcemaps');
// CSS & Less
gulp.task('css', function(){
gulp.src('less/all.less')
.pipe(sourcemaps.init())
.pipe(less())
.pipe(minifyCSS())
.pipe(sourcemaps.write('source-maps'))
.pipe(gulp.dest('public/css'));
});
// JS
gulp.task('js', function() {
gulp.src('resources/assets/bower/jquery/dist/jquery.js')
.pipe(addsrc.append('resources/assets/bower/bootstrap/dist/js/bootstrap.js'))
.pipe(addsrc.append('resources/assets/bower/blahblah/dist/js/blah.js'))
.pipe(addsrc.append('resources/assets/js/my-script.js'))
.pipe(sourcemaps.init())
.pipe(concat('all.js'))
.pipe(uglify())
.pipe(sourcemaps.write('source-maps'))
.pipe(gulp.dest('public/js'));
});
gulp.task('default',['css','js']);
Note: jQuery and Bootstrap added for demonstration purposes of order. Probably better to use CDNs for those since they are so widely used and browsers could have them cached from other sites already.
Try stream-series. It works like merge-stream/event-stream.merge() except that instead of interleaving, it appends to the end. It doesn't require you to specify the object mode like streamqueue, so your code comes out cleaner.
var series = require('stream-series');
gulp.task('minifyInOrder', function() {
return series(gulp.src('vendor/*'),gulp.src('extra'),gulp.src('house/*'))
.pipe(concat('a.js'))
.pipe(uglify())
.pipe(gulp.dest('dest'))
});
merge2 looks like the only working and maintained ordered stream merging tool at the moment.
Update 2020
The APIs are always changing, some libraries become unusable or contain vulnerabilities, or their dependencies contain vulnerabilities, that are not fixed for years. For text files manipulations you'd better use custom NodeJS scripts and popular libraries like globby and fs-extra along with other libraries without Gulp, Grunt, etc wrappers.
import globby from 'globby';
import fs from 'fs-extra';
async function bundleScripts() {
const rootPaths = await globby('./source/js/*.js');
const otherPaths = (await globby('./source/**/*.js'))
.filter(f => !rootFiles.includes(f));
const paths = rootPaths.concat(otherPaths);
const files = Promise.all(
paths.map(
// Returns a Promise
path => fs.readFile(path, {encoding: 'utf8'})
)
);
let bundle = files.join('\n');
bundle = uglify(bundle);
bundle = whatever(bundle);
bundle = bundle.replace(/\/\*.*?\*\//g, '');
await fs.outputFile('./build/js/script.js', bundle, {encoding: 'utf8'});
}
bundleScripts.then(() => console.log('done');
An alternative method is to use a Gulp plugin created specifically for this problem. https://www.npmjs.com/package/gulp-ng-module-sort
It allows you to sort your scripts by adding in a .pipe(ngModuleSort()) as such:
var ngModuleSort = require('gulp-ng-module-sort');
var concat = require('gulp-concat');
gulp.task('angular-scripts', function() {
return gulp.src('./src/app/**/*.js')
.pipe(ngModuleSort())
.pipe(concat('angularAppScripts.js))
.pipe(gulp.dest('./dist/));
});
Assuming a directory convention of:
|——— src/
| |——— app/
| |——— module1/
| |——— sub-module1/
| |——— sub-module1.js
| |——— module1.js
| |——— module2/
| |——— sub-module2/
| |——— sub-module2.js
| |——— sub-module3/
| |——— sub-module3.js
| |——— module2.js
| |——— app.js
Hope this helps!
For me I had natualSort() and angularFileSort() in pipe which was reordering the files. I removed it and now it works fine for me
$.inject( // app/**/*.js files
gulp.src(paths.jsFiles)
.pipe($.plumber()), // use plumber so watch can start despite js errors
//.pipe($.naturalSort())
//.pipe($.angularFilesort()),
{relative: true}))
I just use gulp-angular-filesort
function concatOrder() {
return gulp.src('./build/src/app/**/*.js')
.pipe(sort())
.pipe(plug.concat('concat.js'))
.pipe(gulp.dest('./output/'));
}
I'm in a module environnement where all are core-dependents using gulp.
So, the core module needs to be appended before the others.
What I did:
Move all the scripts to an src folder
Just gulp-rename your core directory to _core
gulp is keeping the order of your gulp.src, my concat src looks like this:
concat: ['./client/src/js/*.js', './client/src/js/**/*.js', './client/src/js/**/**/*.js']
It'll obviously take the _ as the first directory from the list (natural sort?).
Note (angularjs):
I then use gulp-angular-extender to dynamically add the modules to the core module.
Compiled it looks like this:
angular.module('Core', ["ui.router","mm.foundation",(...),"Admin","Products"])
Where Admin and Products are two modules.
if you would like to order third party libraries dependencies, try wiredep. This package basically checks each package dependency in bower.json then wire them up for you.
I tried several solutions from this page, but none worked. I had a series of numbered files which I simply wanted be ordered by alphabetical foldername so when piped to concat() they'd be in the same order. That is, preserve the order of the globbing input. Easy, right?
Here's my specific proof-of-concept code (print is just to see the order printed to the cli):
var order = require('gulp-order');
var gulp = require('gulp');
var print = require('gulp-print').default;
var options = {};
options.rootPath = {
inputDir: process.env.INIT_CWD + '/Draft',
inputGlob: '/**/*.md',
};
gulp.task('default', function(){
gulp.src(options.rootPath.inputDir + options.rootPath.inputGlob, {base: '.'})
.pipe(order([options.rootPath.inputDir + options.rootPath.inputGlob]))
.pipe(print());
});
The reason for the madness of gulp.src? I determined that gulp.src was running async when I was able to use a sleep() function (using a .map with sleeptime incremented by index) to order the stream output properly.
The upshot of the async of src mean dirs with more files in it came after dirs with fewer files, because they took longer to process.
In my gulp setup, I'm specifying the vendor files first and then specifying the (more general) everything, second. And it successfully puts the vendor js before the other custom stuff.
gulp.src([
// vendor folder first
path.join(folder, '/vendor/**/*.js'),
// custom js after vendor
path.join(folder, '/**/*.js')
])
Apparently you can pass in the "nosort" option to gulp.src gulp.src.