Develop Reference

Replace a phrase in a string that is being broken up into 2 separate lines [duplicate]

Is there a simple way to ignore the white space in a target string when searching for matches using a regular expression pattern? For example, if my search is for "cats", I would want "c ats" or "ca ts" to match. I can't strip out the whitespace beforehand because I need to find the begin and end index of the match (including any whitespace) in order to highlight that match and any whitespace needs to be there for formatting purposes.

You can stick optional whitespace characters \s* in between every other character in your regex. Although granted, it will get a bit lengthy.
/cats/ -> /c\s*a\s*t\s*s/

While the accepted answer is technically correct, a more practical approach, if possible, is to just strip whitespace out of both the regular expression and the search string.
If you want to search for "my cats", instead of:
myString.match(/m\s*y\s*c\s*a\*st\s*s\s*/g)
Just do:
myString.replace(/\s*/g,"").match(/mycats/g)
Warning: You can't automate this on the regular expression by just replacing all spaces with empty strings because they may occur in a negation or otherwise make your regular expression invalid.

Addressing Steven's comment to Sam Dufel's answer
Thanks, sounds like that's the way to go. But I just realized that I only want the optional whitespace characters if they follow a newline. So for example, "c\n ats" or "ca\n ts" should match. But wouldn't want "c ats" to match if there is no newline. Any ideas on how that might be done?
This should do the trick:
/c(?:\n\s*)?a(?:\n\s*)?t(?:\n\s*)?s/
See this page for all the different variations of 'cats' that this matches.
You can also solve this using conditionals, but they are not supported in the javascript flavor of regex.

You could put \s* inbetween every character in your search string so if you were looking for cat you would use c\s*a\s*t\s*s\s*s
It's long but you could build the string dynamically of course.
You can see it working here: http://www.rubular.com/r/zzWwvppSpE

If you only want to allow spaces, then
\bc *a *t *s\b
should do it. To also allow tabs, use
\bc[ \t]*a[ \t]*t[ \t]*s\b
Remove the \b anchors if you also want to find cats within words like bobcats or catsup.

This approach can be used to automate this
(the following exemplary solution is in python, although obviously it can be ported to any language):
you can strip the whitespace beforehand AND save the positions of non-whitespace characters so you can use them later to find out the matched string boundary positions in the original string like the following:
def regex_search_ignore_space(regex, string):
no_spaces = ''
char_positions = []
for pos, char in enumerate(string):
if re.match(r'\S', char): # upper \S matches non-whitespace chars
no_spaces += char
char_positions.append(pos)
match = re.search(regex, no_spaces)
if not match:
return match
# match.start() and match.end() are indices of start and end
# of the found string in the spaceless string
# (as we have searched in it).
start = char_positions[match.start()] # in the original string
end = char_positions[match.end()] # in the original string
matched_string = string[start:end] # see
# the match WITH spaces is returned.
return matched_string
with_spaces = 'a li on and a cat'
print(regex_search_ignore_space('lion', with_spaces))
# prints 'li on'
If you want to go further you can construct the match object and return it instead, so the use of this helper will be more handy.
And the performance of this function can of course also be optimized, this example is just to show the path to a solution.

The accepted answer will not work if and when you are passing a dynamic value (such as "current value" in an array loop) as the regex test value. You would not be able to input the optional white spaces without getting some really ugly regex.
Konrad Hoffner's solution is therefore better in such cases as it will strip both the regest and test string of whitespace. The test will be conducted as though both have no whitespace.

Why do I have to add double backslash on javascript regex?

When I use a tool like regexpal.com it let's me use regex as I am used to. So for example I want to check a text if there is a match for a word that is at least 3 letters long and ends with a white space so it will match 'now ', 'noww ' and so on.
On regexpal.com this regex works \w{3,}\s this matches both the words above.
But on javascript I have to add double backslashes before w and s. Like this:
var regexp = new RegExp('\\w{3,}\\s','i');
or else it does not work. I looked around for answers and searched for double backslash javascript regex but all I got was completely different topics about how to escape backslash and so on. Does someone have an explanation for this?

You could write the regex without double backslash but you need to put the regex inside forward slashshes as delimiter.
/^\w{3,}\s$/.test('foo ')
Anchors ^ (matches the start of the line boundary), $ (matches the end of a line) helps to do an exact string match. You don't need an i modifier since \w matches both upper and lower case letters.

Why? Because in a string, "\" quotes the following character so "\w" is seen as "w". It essentially says "treat the next character literally and don't interpret it".
To avoid that, the "\" must be quoted too, so "\\w" is seen by the regular expression parser as "\w".

Make regex find a text inside tags with line breaks in the content - JavaScript

thanks for coming here, so i've got this little code:
while(/\[del\](.*?)\[\/del\]/i.exec(text) != null)
text = text.replace(/\[del\](.*?)\[\/del\]/i, "<s>$1</s>");
but when there are line breaks, it wont match.
Example:
[del]asdsadasdaasdadsadsadsadasdsadsa[/del] - this won't be matched
I'm really new to regex, so what I'm doing wrong?

By default in many regex flavors, the dot doesn't match the newline character. Javascript doesn't have the singleline modifier (?s) to change this behaviour. The most current trick to match all characters including newlines is to use [\s\S] that matches all that is a whitespace character and all that is not a whitespace character.
As an aside comment, you don't need to put the replace method in a while loop, since the replace will only perform a replacement if something is found. If you want to replace all occurences, just add the g command at the end of the pattern.
text = text.replace(/\[del\]([\s\S]*?)\[\/del\]/ig, "<s>$1</s>");
Note that for this specific replacement, since your del tag doesn't seem to have parameters, you can simply write:
text = text.replace(/\[(\/?)del\]/ig, "<$1s>");
(it avoids a lot of work)

Regex to allow special characters

I need a regex that will allow alphabets, hyphen (-), quote ('), dot (.), comma(,) and space. this is what i have now
^[A-Za-z\s\-]$
Thanks

I removed \s from your regex since you said space, and not white space. Feel free to put it back by replacing the space at the end with \s Otherwise pretty simple:
^[A-Za-z\-'., ]+$
It matches start of the string. Any character in the set 1 or more times, and end of the string. You don't have to escape . in a set, in case you were wondering.

You probably tried new RegExp("^[A-Za-z\s\-\.\'\"\,]$"). Yet, you have a string literal there, and the backslashes just escape the following characters - necessary only for the delimiting quote (and for backslashes).
"^[A-Za-z\s\-\.\'\"\,]$" === "^[A-Za-zs-.'\",]$" === '^[A-Za-zs-.\'",]$'
Yet, the range s-. is invalid. So you would need to escape the backslash to pass a string with a backslash in the RegExp constructor:
new RegExp("^[A-Za-z\\s\\-\\.\\'\\\"\\,]$")
Instead, regex literals are easier to read and write as you do not need to string-escape regex escape characters. Also, they are parsed only once during script "compilation" - nothing needs to be executed each time you the line is evaluated. The RegExp constructor only needs to be used if you want to build regexes dynamically. So use
/^[A-Za-z\s\-\.\'\"\,]$/
and it will work. Also, you don't need to escape any of these chars in a character class - so it's just
/^[A-Za-z\s\-.'",]$/

You are pretty close, try the following:
^[A-Za-z\s\-'.,]+$
Note that I assumed that you want to match strings that contain one or more of any of these characters, so I added + after the character class which mean "repeat the previous element one or more times".
Note that this will currently also allow tabs and line breaks in addition to spaces because \s will match any whitespace character. If you only want to allow spaces, change it to ^[A-Za-z \-'.,]+$ (just replaced \s with a space).

Regex from character until end of string

Hey. First question here, probably extremely lame, but I totally suck in regular expressions :(
I want to extract the text from a series of strings that always have only alphabetic characters before and after a hyphen:
string = "some-text"
I need to generate separate strings that include the text before AND after the hyphen. So for the example above I would need string1 = "some" and string2 = "text"
I found this and it works for the text before the hyphen, now I only need the regex for the one after the hyphen.
Thanks.

You don't need regex for that, you can just split it instead.
var myString = "some-text";
var splitWords = myString.split("-");
splitWords[0] would then be "some", and splitWords[1] will be "text".
If you actually have to use regex for whatever reason though - the $ character marks the end of a string in regex, so -(.*)$ is a regex that will match everything after the first hyphen it finds till the end of the string. That could actually be simplified that to just -(.*) too, as the .* will match till the end of the string anyway.