Javascript call special function after confirm - javascript

I made confirm function which shows special div to confirm or not. The task is, when I confirm some action I need to call another function, which I need to write into onClick attribute in my button.
There is what I want:
<button onClick="jsShowConfirmDiv(); jsMyFunction()">
<span>Edit</span>
</button>
This is one button, but another will be something like this:
<button onClick="jsShowConfirmDiv(); jsAnotherFunction()">
<span>Detail</span>
</button>
I need to call my functions (jsMyFunction() and jsAnotherFunction() only when I click on button yes.
For better imagination there is function in actual version (working, but limitless by parameter, and I think, than that is bad solution):
function jsShowConfirmMessage(content, yesFunction, par1, par2, par3) {
$("id_confirm_message").setAttribute("classType", "confirm");
$("id_popup_confirm_content").innerHTML = content;
$("id_confirm_message_overlay").className = "popup_visible";
window.location.hash = "#id_confirm_message_overlay";
$("id_confirm_yes").stopObserving('click');
$("id_confirm_yes").observe('click', function() {
jsHideConfirmMessage();
if (!par1) {
yesFunction();
} else if (!par2) {
yesFunction(par1);
} else if (!par3) {
yesFunction(par1, par2);
} else {
yesFunction(par1, par2, par3);
}
});
}
And I call it like this:
<button onClick="jsShowConfirmMessage('Really?', jsSpecialFunction, 'param')">
<span>Edit</span>
</button>
Thank you for your answer.

If user click no (or cancel, ...) you can throw an exception. Exception stop executing commands and second (third, ....) function will not be called.

Related

One button runs a function, a second button runs a different function but only if the 1st function gets run

I have 4 buttons assigned to run 4 different functions. Seen below
document.getElementById("buttonOne").addEventListener("click", functionOne);
document.getElementById("buttonTwo").addEventListener("click", functionTwo);
document.getElementById("buttonThree").addEventListener("click", functionThree);
document.getElementById("buttonFour").addEventListener("click", functionFour);
I have another function,functionFive, that is not controlled by any button.
All of these functions set parameters on a 3D object when the given button is clicked. Clicking button one runs functionOne, setting a specific set of parameters. If those parameters are set from functionOne and I click button four, I want functionFive to be run.
If those parameters from functionOne are not set when button four is clicked, I want functionFour to run.
To clarify, I only want this functionFive to run if functionOnehas already run and its parameters are set.
Can someone help me write this script?
I've rewritten my question to fit my exact need. My original description was condensed to try and simplify it so it wouldn't be this long.
Maybe make a new boolean variable that is false when it's defined, but set to true when functionOne is run and that determines which function buttonTwo runs.
<html>
<script>
var oneClicked = false;
function functionOne() {
oneClicked = true;
alert('functionOne');
}
function functionTwo() {
alert('functionTwo');
}
function functionThree() {
alert('functionThree');
}
</script>
<button onclick="functionOne()">button one</button>
<button onclick="if (oneClicked) {functionThree()} else {functionTwo()}">button two</button>
</html>
Found the working solution to be....
var clicked = false;
function functionOne() {
/functionOne parameters
clicked = true;
}
function functionTwo() {
clicked = false;
//functionTwo parameters
}
functionFour() {
if (clicked) {
cliked = false;
functionFive()
} else {
//functionFour parameters
}
}
}

Between two event listeners: How do I pass my function without using trigger()?

Please check out my diagram, and the pseudo-code below. I'm trying to figure out how to pass a function between two event listeners.
Basically, I want to execute some code if "Availability" is less than 0, OR when a user clicks "confirm" in a bootstrap dialog. If the Availability is greater than 0, you'll get the special bootstrap dialog.
I'm trying to avoid writing the same code twice. I'm also trying to avoid using trigger $("#btnConfirm").trigger("click", fn1); --- my assumption is that there is a sexier way, like a callback, or something...
So.... how do I get the code I want to execute into the other 'button click' event listener --OR-- how do I return "btnConfirm" back to the event listener that called the dialog?
$("#Select").on("change", function(e) {
fn1 = function() {
//stuff I want to do
};
//a check that must be passed
currAvail = $("#Availability").val();
if (currAvail > 0) {
//show a message, "Are you sure you want to make the thing?"
//if YES, execute fn1()
//fn1() needs to be available to btnConfirm click listener
// use trigger("click", fn1) ????
} else {
//execute the code
fn1();
};
});
$("#btnConfirm").on("click", function(e, param1) {
//Ok, well, they said YES...
//so I need to execute fn1();
});
Since the requirement is to call fn1() in both cases, you can separate the logic out into a method and call when it is needed
function fn1() {
//code to execute on no goes here
}
$("#Select").on("change", function(e) {
let currAvail = $("#Availability").val();
if (currAvail > 0) {
//show modal window
} else {
//execute the code
fn1();
};
});
$("#btnConfirm").on("click", function(e, param1) {
fn1()
});
Why not just move the function definition to outside the change callback?
$("#Select").on("change", function(e) {
//a check that must be passed
currAvail = $("#Availability").val();
if (currAvail > 0) {
//show a message, "Are you sure you want to make the thing?"
//if YES, execute fn1()
//fn1() needs to be available to btnConfirm click listener
// use trigger("click", fn1) ????
} else {
//execute the code
fn1();
};
});
$("#btnConfirm").on("click", function(e, param1) {
//Ok, well, they said YES...
//so I need to execute fn1();
});
// Function move to here.
function fn1() {
//stuff I want to do
};

Knockout/JavaScript Ignore Multiclick

I'm having some problems with users clicking buttons multiple times and I want to suppress/ignore clicks while the first Ajax request does its thing. For example if a user wants add items to their shopping cart, they click the add button. If they click the add button multiple times, it throws a PK violation because its trying to insert duplicate items into a cart.
So there are some possible solutions mentioned here: Prevent a double click on a button with knockout.js
and here: How to prevent a double-click using jQuery?
However, I'm wondering if the approach below is another possible solution. Currently I use a transparent "Saving" div that covers the entire screen to try to prevent click throughs, but still some people manage to get a double click in. I'm assuming because they can click faster than the div can render. To combat this, I'm trying to put a lock on the Ajax call using a global variable.
The Button
<span style="SomeStyles">Add</span>
Knockout executes this script on button click
vmProductsIndex.AddItemToCart = function (item) {
if (!app.ajaxService.inCriticalSection()) {
app.ajaxService.criticalSection(true);
app.ajaxService.ajaxPostJson("#Url.Action("AddItemToCart", "Products")",
ko.mapping.toJSON(item),
function (result) {
ko.mapping.fromJS(result, vmProductsIndex.CartSummary);
item.InCart(true);
item.QuantityOriginal(item.Quantity());
},
function (result) {
$("#error-modal").modal();
},
vmProductsIndex.ModalErrors);
app.ajaxService.criticalSection(false);
}
}
That calls this script
(function (app) {
"use strict";
var criticalSectionInd = false;
app.ajaxService = (function () {
var ajaxPostJson = function (method, jsonIn, callback, errorCallback, errorArray) {
//Add the item to the cart
}
};
var inCriticalSection = function () {
if (criticalSectionInd)
return true;
else
return false;
};
var criticalSection = function (flag) {
criticalSectionInd = flag;
};
// returns the app.ajaxService object with these functions defined
return {
ajaxPostJson: ajaxPostJson,
ajaxGetJson: ajaxGetJson,
setAntiForgeryTokenData: setAntiForgeryTokenData,
inCriticalSection: inCriticalSection,
criticalSection: criticalSection
};
})();
}(app));
The problem is still I can spam click the button and get the primary key violation. I don't know if this approach is just flawed and Knockout isn't quick enough to update the button's visible binding before the first Ajax call finishes or if every time they click the button a new instance of the criticalSectionInd is created and not truely acting as a global variable.
If I'm going about it wrong I'll use the approaches mentioned in the other posts, its just this approach seems simpler to implement without having to refactor all of my buttons to use the jQuery One() feature.
You should set app.ajaxService.criticalSection(false); in the callback methods.
right now you are executing this line of code at the end of your if clause and not inside of the success or error callback, so it gets executed before your ajax call is finished.
vmProductsIndex.AddItemToCart = function (item) {
if (!app.ajaxService.inCriticalSection()) {
app.ajaxService.criticalSection(true);
app.ajaxService.ajaxPostJson("#Url.Action("AddItemToCart", "Products")",
ko.mapping.toJSON(item),
function (result) {
ko.mapping.fromJS(result, vmProductsIndex.CartSummary);
item.InCart(true);
item.QuantityOriginal(item.Quantity());
app.ajaxService.criticalSection(false);
},
function (result) {
$("#error-modal").modal();
app.ajaxService.criticalSection(false);
},
vmProductsIndex.ModalErrors);
}
}
you could use the "disable" binding from knockout to prevent the click binding of the anchor tag to be fired.
here is a little snippet for that. just set a flag to true when your action starts and set it to false again when execution is finished. in the meantime, the disable binding prevents the user from executing the click function.
function viewModel(){
var self = this;
self.disableAnchor = ko.observable(false);
self.randomList = ko.observableArray();
self.loading = ko.observable(false);
self.doWork = function(){
if(self.loading()) return;
self.loading(true);
setTimeout(function(){
self.randomList.push("Item " + (self.randomList().length + 1));
self.loading(false);
}, 1000);
}
}
ko.applyBindings(new viewModel());
<script src="https://cdnjs.cloudflare.com/ajax/libs/knockout/3.0.0/knockout-min.js"></script>
Click me
<br />
<div data-bind="visible: loading">...Loading...</div>
<br />
<div data-bind="foreach: randomList">
<div data-bind="text: $data"></div>
</div>

Javascript Alertify with return from confirm

I'm trying to use alertify.js as a confirmation dialog for all my confirm scripts. But it just isn't working like regular JS confirm does. In the code below I never get a return true
function aConf ( mes ) {
alertify.confirm( mes, function (e) {
return e;
});
}
Delete
Of course if I replace aConf with JS' confirm it works. So why is alertify not sending me back it's outcome?
Because confirm is a blocking function (no javascript will run until it returns true/false), and alertify is non-blocking (JS keeps executing). Alertify does not immediately return a true/false, but instead, it probably returns undefined immediately, then it calls a callback function later, after the user clicks OK or Cancel. The return value from that callback function has no effect in your example, because the onclick code has already finished running (because it is non-blocking).
Assuming you are using this: https://github.com/fabien-d/alertify.js/
This is how it actually works with a callback function, not a return value:
alertify.confirm( message, function (e) {
if (e) {
//after clicking OK
} else {
//after clicking Cancel
}
});
For your code sample, you might try something like this:
function performDelete ( a_element ) {
// perform your delete here
// a_element is the <a> tag that was clicked
}
function confirmAction ( a_element, message, action ) {
alertify.confirm(message, function(e) {
if (e) {
// a_element is the <a> tag that was clicked
if (action) {
action(a_element);
}
}
});
}
Delete
EDIT: updated to be a generic confirm dialog that calls a callback function if the user clicks ok.

Need to clear a function memory. jQuery running function too many times

Initially, I had a problem that a click event was firing multiple times, but I have managed to overcome that with a probably over use of unbind() and one() as you'll see in my code below!
What I have here is some code which opens up a universally usable Modal window which I use for various things, including, in some cases a password form.
I don't think you need the HTML so I won't post that.
When a button, or an action causes the window to be required, I call the function like this:
showModalAlert(type, theWidth, theHeight, title, html, confirmThis, denyThis)
The first three variables determine how the window will look, title and html determine the content and confirmThis and denyThis are functions set immediately prior to calling this function and determine what the action should be if this is a confirm window and the confirm or deny buttons are press.
In the case of a security window, the confirm button is replace by a "sign it" button which submits a simple password form and returns a User Id from database. If a User Id is successfully returned, the script programatically presses the confirm button and in turn runs it's function as per the call to the inital opening of the modal window.
My problem is that if an incorrect password is entered, or a user cancels the window and then later without refreshing the browser window, re-enters the password correctly, the confirmThis() function is performed twice (or as many times as the incorrect password/cancel action was performed).
So, clearly, what it is doing is "remembering" the confirmThis function each time.
As I said, initially, the password success function was clicking confirmIt twice, copious use of one() has fixed this, it is now definitely only clicking confirmIt once, but it is still performing the function multiple time.
How can I clear this function and ensure it is only performed once?
The function from which I am calling the modal window looks like this:
$('#saveDelivery').click(function () {
function confirmIt() {
formData = (JSON.stringify($('#delDetail').serializeObject()));
saveData(formData);
$('#saveDelivery').removeClass('centreLoader');
};
showModalAlert('security', '300px', '185px', 'Security!', 'You need to "Sign" this action.', confirmIt, '');
});
It's simply a click on the saveDelivery element, the confirmThis function is declared at this point and submits an AJAX form
the actual showModalAlert function is below:
function showModalAlert(type, theWidth, theHeight, title, html, confirmThis, denyThis) {
// stuff that opens the alert window \\
if (confirmThis == '') {
$('#confirmIt').one('click', function () { $('#closeAlert').one('click').click(); });
} else {
$('#confirmIt').one('click', function () { confirmThis(); $('#closeAlert').one('click').click(); });
};
if (denyThis == '') {
$('#denyIt').one('click', function () { $('#closeAlert').one('click').click(); $('#signIt').unbind(); });
} else {
$('#denyIt').one('click', function () { denyThis(); $('#closeAlert').one('click').click(); $('#signIt').unbind(); });
};
if (type == "confirm") {
$('.closeAlert, .signItForm').hide();
};
if (type == "alert") {
$('.alertConfirm, .signItForm').hide();
};
if (type == "fixedAlert") {
$('.closeAlert, .alertConfirm, .signItForm').hide();
};
if (type == "security") {
$('.signItForm').show();
$('.closeAlert').hide();
$('#confirmIt').hide();
$('#signIt').unbind().fadeTo('fast',1);
};
};
$('#signIt').live('click', function () {
var formData = (JSON.stringify($('.secureSign').serializeObject()));
var signitPwd = $('#signItpwd').val();
var jsonURL = "/jsonout/getdata.aspx?sql=SELECT id, password FROM users WHERE password ='" + signitPwd + "' LIMIT 1&output=json&usedb=new&labelName=any&fileName=";
$.getJSON(jsonURL, function (data) {
if (data.length > 0) {
$('.savingUserID').val(data[0].id);
$('#confirmIt').one('click').click();
$('#signIt').fadeTo('fast', 0);
$('#confirmIt').show();
} else {
$('#signIt').fadeTo('fast', 0);
$('#confirmIt').one('click').show();
$('.closeAlert').show();
$('.alertConfirm, .signItForm').hide();
$('#alertTitle').html("Error!");
$('#alertContent').css({ 'text-align': 'center' }).html("Password Denied");
};
});
});
From my understanding of $.one, it merely runs the event ONCE. If you bind it twice to the event, it will run twice instantaneously, but no more.
Example: http://jsfiddle.net/qCwMH/ (click the button, and it will run the event 4 times).
Each time you click saveDelivery, you are infact, binding another $.one event to #confirmIt.
What you could do is unbind your events from confirmIt and denyIt at the start of the modal function (i.e. $('#confirmIt, #denyIt').unbind('click');, and then you will assign them fresh each time that function is called, rather than building on top of them. Not ideal, as binding/unbinding uses more resources than other options, but just give that a try to start with perhaps?

Categories

Resources