Related
Consider the following code that reads an array of files in a serial/sequential manner. readFiles returns a promise, which is resolved only once all files have been read in sequence.
var readFile = function(file) {
... // Returns a promise.
};
var readFiles = function(files) {
return new Promise((resolve, reject) => {
var readSequential = function(index) {
if (index >= files.length) {
resolve();
} else {
readFile(files[index]).then(function() {
readSequential(index + 1);
}).catch(reject);
}
};
readSequential(0); // Start with the first file!
});
};
The above code works, but I don't like having to do recursion for things to occur sequentially. Is there a simpler way that this code can be re-written so that I don't have to use my weird readSequential function?
Originally I tried to use Promise.all, but that caused all of the readFile calls to happen concurrently, which is not what I want:
var readFiles = function(files) {
return Promise.all(files.map(function(file) {
return readFile(file);
}));
};
Update 2017: I would use an async function if the environment supports it:
async function readFiles(files) {
for(const file of files) {
await readFile(file);
}
};
If you'd like, you can defer reading the files until you need them using an async generator (if your environment supports it):
async function* readFiles(files) {
for(const file of files) {
yield await readFile(file);
}
};
Update: In second thought - I might use a for loop instead:
var readFiles = function(files) {
var p = Promise.resolve(); // Q() in q
files.forEach(file =>
p = p.then(() => readFile(file));
);
return p;
};
Or more compactly, with reduce:
var readFiles = function(files) {
return files.reduce((p, file) => {
return p.then(() => readFile(file));
}, Promise.resolve()); // initial
};
In other promise libraries (like when and Bluebird) you have utility methods for this.
For example, Bluebird would be:
var Promise = require("bluebird");
var fs = Promise.promisifyAll(require("fs"));
var readAll = Promise.resolve(files).map(fs.readFileAsync,{concurrency: 1 });
// if the order matters, you can use Promise.each instead and omit concurrency param
readAll.then(function(allFileContents){
// do stuff to read files.
});
Although there is really no reason not to use async await today.
Here is how I prefer to run tasks in series.
function runSerial() {
var that = this;
// task1 is a function that returns a promise (and immediately starts executing)
// task2 is a function that returns a promise (and immediately starts executing)
return Promise.resolve()
.then(function() {
return that.task1();
})
.then(function() {
return that.task2();
})
.then(function() {
console.log(" ---- done ----");
});
}
What about cases with more tasks? Like, 10?
function runSerial(tasks) {
var result = Promise.resolve();
tasks.forEach(task => {
result = result.then(() => task());
});
return result;
}
This question is old, but we live in a world of ES6 and functional JavaScript, so let's see how we can improve.
Because promises execute immediately, we can't just create an array of promises, they would all fire off in parallel.
Instead, we need to create an array of functions that returns a promise. Each function will then be executed sequentially, which then starts the promise inside.
We can solve this a few ways, but my favorite way is to use reduce.
It gets a little tricky using reduce in combination with promises, so I have broken down the one liner into some smaller digestible bites below.
The essence of this function is to use reduce starting with an initial value of Promise.resolve([]), or a promise containing an empty array.
This promise will then be passed into the reduce method as promise. This is the key to chaining each promise together sequentially. The next promise to execute is func and when the then fires, the results are concatenated and that promise is then returned, executing the reduce cycle with the next promise function.
Once all promises have executed, the returned promise will contain an array of all the results of each promise.
ES6 Example (one liner)
/*
* serial executes Promises sequentially.
* #param {funcs} An array of funcs that return promises.
* #example
* const urls = ['/url1', '/url2', '/url3']
* serial(urls.map(url => () => $.ajax(url)))
* .then(console.log.bind(console))
*/
const serial = funcs =>
funcs.reduce((promise, func) =>
promise.then(result => func().then(Array.prototype.concat.bind(result))), Promise.resolve([]))
ES6 Example (broken down)
// broken down to for easier understanding
const concat = list => Array.prototype.concat.bind(list)
const promiseConcat = f => x => f().then(concat(x))
const promiseReduce = (acc, x) => acc.then(promiseConcat(x))
/*
* serial executes Promises sequentially.
* #param {funcs} An array of funcs that return promises.
* #example
* const urls = ['/url1', '/url2', '/url3']
* serial(urls.map(url => () => $.ajax(url)))
* .then(console.log.bind(console))
*/
const serial = funcs => funcs.reduce(promiseReduce, Promise.resolve([]))
Usage:
// first take your work
const urls = ['/url1', '/url2', '/url3', '/url4']
// next convert each item to a function that returns a promise
const funcs = urls.map(url => () => $.ajax(url))
// execute them serially
serial(funcs)
.then(console.log.bind(console))
To do this simply in ES6:
function(files) {
// Create a new empty promise (don't do that with real people ;)
var sequence = Promise.resolve();
// Loop over each file, and add on a promise to the
// end of the 'sequence' promise.
files.forEach(file => {
// Chain one computation onto the sequence
sequence =
sequence
.then(() => performComputation(file))
.then(result => doSomething(result));
// Resolves for each file, one at a time.
})
// This will resolve after the entire chain is resolved
return sequence;
}
Addition example
const addTwo = async () => 2;
const addThree = async (inValue) => new Promise((resolve) => setTimeout(resolve(inValue + 3), 2000));
const addFour = (inValue) => new Promise((res) => setTimeout(res(inValue + 4), 1000));
const addFive = async (inValue) => inValue + 5;
// Function which handles promises from above
async function sequenceAddition() {
let sum = await [addTwo, addThree, addFour, addFive].reduce(
(promise, currPromise) => promise.then((val) => currPromise(val)),
Promise.resolve()
);
console.log('sum:', sum); // 2 + 3 + 4 + 5 = 14
}
// Run function. See console for result.
sequenceAddition();
General syntax to use reduce()
function sequence(tasks, fn) {
return tasks.reduce((promise, task) => promise.then(() => fn(task)), Promise.resolve());
}
UPDATE
items-promise is a ready to use NPM package doing the same.
I've had to run a lot of sequential tasks and used these answers to forge a function that would take care of handling any sequential task...
function one_by_one(objects_array, iterator, callback) {
var start_promise = objects_array.reduce(function (prom, object) {
return prom.then(function () {
return iterator(object);
});
}, Promise.resolve()); // initial
if(callback){
start_promise.then(callback);
}else{
return start_promise;
}
}
The function takes 2 arguments + 1 optional. First argument is the array on which we will be working. The second argument is the task itself, a function that returns a promise, the next task will be started only when this promise resolves. The third argument is a callback to run when all tasks have been done. If no callback is passed, then the function returns the promise it created so we can handle the end.
Here's an example of usage:
var filenames = ['1.jpg','2.jpg','3.jpg'];
var resize_task = function(filename){
//return promise of async resizing with filename
};
one_by_one(filenames,resize_task );
Hope it saves someone some time...
With Async/Await (if you have the support of ES7)
function downloadFile(fileUrl) { ... } // This function return a Promise
async function main()
{
var filesList = [...];
for (const file of filesList) {
await downloadFile(file);
}
}
(you must use for loop, and not forEach because async/await has problems running in forEach loop)
Without Async/Await (using Promise)
function downloadFile(fileUrl) { ... } // This function return a Promise
function downloadRecursion(filesList, index)
{
index = index || 0;
if (index < filesList.length)
{
downloadFile(filesList[index]).then(function()
{
index++;
downloadRecursion(filesList, index); // self invocation - recursion!
});
}
else
{
return Promise.resolve();
}
}
function main()
{
var filesList = [...];
downloadRecursion(filesList);
}
My preferred solution:
function processArray(arr, fn) {
return arr.reduce(
(p, v) => p.then((a) => fn(v).then(r => a.concat([r]))),
Promise.resolve([])
);
}
It's not fundamentally different from others published here but:
Applies the function to items in series
Resolves to an array of results
Doesn't require async/await (support is still quite limited, circa 2017)
Uses arrow functions; nice and concise
Example usage:
const numbers = [0, 4, 20, 100];
const multiplyBy3 = (x) => new Promise(res => res(x * 3));
// Prints [ 0, 12, 60, 300 ]
processArray(numbers, multiplyBy3).then(console.log);
Tested on reasonable current Chrome (v59) and NodeJS (v8.1.2).
First, you need to understand that a promise is executed at the time of creation.
So for example if you have a code:
["a","b","c"].map(x => returnsPromise(x))
You need to change it to:
["a","b","c"].map(x => () => returnsPromise(x))
Then we need to sequentially chain promises:
["a", "b", "c"].map(x => () => returnsPromise(x))
.reduce(
(before, after) => before.then(_ => after()),
Promise.resolve()
)
executing after(), will make sure that promise is created (and executed) only when its time comes.
Nicest solution that I was able to figure out was with bluebird promises. You can just do Promise.resolve(files).each(fs.readFileAsync); which guarantees that promises are resolved sequentially in order.
With async/await of ES2016 (and maybe some features of ES2018), this can be reduced to this form:
function readFile(file) {
... // Returns a promise.
}
async function readFiles(files) {
for (file in files) {
await readFile(file)
}
}
I haven't seen another answer express that simplicity. The OP said parallel execution of readFile was not desired. However, with IO like this it really makes sense to not be blocking on a single file read, while keeping the loop execution synchronous (you don't want to do the next step until all files have been read). Since I just learned about this and am a bit excited about it, I'll share that approach of parallel asynchronous execution of readFile with overall synchronous execution of readFiles.
async function readFiles(files) {
await Promise.all(files.map(readFile))
}
Isn't that a thing of beauty?
This is a slight variation of another answer above. Using native Promises:
function inSequence(tasks) {
return tasks.reduce((p, task) => p.then(task), Promise.resolve())
}
Explanation
If you have these tasks [t1, t2, t3], then the above is equivalent to Promise.resolve().then(t1).then(t2).then(t3). It's the behavior of reduce.
How to use
First You need to construct a list of tasks! A task is a function that accepts no argument. If you need to pass arguments to your function, then use bind or other methods to create a task. For example:
var tasks = files.map(file => processFile.bind(null, file))
inSequence(tasks).then(...)
I created this simple method on the Promise object:
Create and add a Promise.sequence method to the Promise object
Promise.sequence = function (chain) {
var results = [];
var entries = chain;
if (entries.entries) entries = entries.entries();
return new Promise(function (yes, no) {
var next = function () {
var entry = entries.next();
if(entry.done) yes(results);
else {
results.push(entry.value[1]().then(next, function() { no(results); } ));
}
};
next();
});
};
Usage:
var todo = [];
todo.push(firstPromise);
if (someCriterium) todo.push(optionalPromise);
todo.push(lastPromise);
// Invoking them
Promise.sequence(todo)
.then(function(results) {}, function(results) {});
The best thing about this extension to the Promise object, is that it is consistent with the style of promises. Promise.all and Promise.sequence is invoked the same way, but have different semantics.
Caution
Sequential running of promises is not usually a very good way to use promises. It's usually better to use Promise.all, and let the browser run the code as fast as possible. However, there are real use cases for it - for example when writing a mobile app using javascript.
My answer based on https://stackoverflow.com/a/31070150/7542429.
Promise.series = function series(arrayOfPromises) {
var results = [];
return arrayOfPromises.reduce(function(seriesPromise, promise) {
return seriesPromise.then(function() {
return promise
.then(function(result) {
results.push(result);
});
});
}, Promise.resolve())
.then(function() {
return results;
});
};
This solution returns the results as an array like Promise.all().
Usage:
Promise.series([array of promises])
.then(function(results) {
// do stuff with results here
});
Use Array.prototype.reduce, and remember to wrap your promises in a function otherwise they will already be running!
// array of Promise providers
const providers = [
function(){
return Promise.resolve(1);
},
function(){
return Promise.resolve(2);
},
function(){
return Promise.resolve(3);
}
]
const inSeries = function(providers){
const seed = Promise.resolve(null);
return providers.reduce(function(a,b){
return a.then(b);
}, seed);
};
nice and easy...
you should be able to re-use the same seed for performance, etc.
It's important to guard against empty arrays or arrays with only 1 element when using reduce, so this technique is your best bet:
const providers = [
function(v){
return Promise.resolve(v+1);
},
function(v){
return Promise.resolve(v+2);
},
function(v){
return Promise.resolve(v+3);
}
]
const inSeries = function(providers, initialVal){
if(providers.length < 1){
return Promise.resolve(null)
}
return providers.reduce((a,b) => a.then(b), providers.shift()(initialVal));
};
and then call it like:
inSeries(providers, 1).then(v => {
console.log(v); // 7
});
Using modern ES:
const series = async (tasks) => {
const results = [];
for (const task of tasks) {
const result = await task;
results.push(result);
}
return results;
};
//...
const readFiles = await series(files.map(readFile));
Most of the answers dont include the results of ALL promises individually, so in case someone is looking for this particular behaviour, this is a possible solution using recursion.
It follows the style of Promise.all:
Returns the array of results in the .then() callback.
If some promise fails, its returned immediately in the .catch() callback.
const promiseEach = (arrayOfTasks) => {
let results = []
return new Promise((resolve, reject) => {
const resolveNext = (arrayOfTasks) => {
// If all tasks are already resolved, return the final array of results
if (arrayOfTasks.length === 0) return resolve(results)
// Extract first promise and solve it
const first = arrayOfTasks.shift()
first().then((res) => {
results.push(res)
resolveNext(arrayOfTasks)
}).catch((err) => {
reject(err)
})
}
resolveNext(arrayOfTasks)
})
}
// Lets try it 😎
const promise = (time, shouldThrowError) => new Promise((resolve, reject) => {
const timeInMs = time * 1000
setTimeout(()=>{
console.log(`Waited ${time} secs`)
if (shouldThrowError) reject(new Error('Promise failed'))
resolve(time)
}, timeInMs)
})
const tasks = [() => promise(1), () => promise(2)]
promiseEach(tasks)
.then((res) => {
console.log(res) // [1, 2]
})
// Oops some promise failed
.catch((error) => {
console.log(error)
})
Note about the tasks array declaration:
In this case is not possible to use the following notation like Promise.all would use:
const tasks = [promise(1), promise(2)]
And we have to use:
const tasks = [() => promise(1), () => promise(2)]
The reason is that JavaScript starts executing the promise immediatelly after its declared. If we use methods like Promise.all, it just checks that the state of all of them is fulfilled or rejected, but doesnt start the exection itself. Using () => promise() we stop the execution until its called.
You can use this function that gets promiseFactories List:
function executeSequentially(promiseFactories) {
var result = Promise.resolve();
promiseFactories.forEach(function (promiseFactory) {
result = result.then(promiseFactory);
});
return result;
}
Promise Factory is just simple function that returns a Promise:
function myPromiseFactory() {
return somethingThatCreatesAPromise();
}
It works because a promise factory doesn't create the promise until it's asked to. It works the same way as a then function – in fact, it's the same thing!
You don't want to operate over an array of promises at all. Per the Promise spec, as soon as a promise is created, it begins executing. So what you really want is an array of promise factories...
If you want to learn more on Promises, you should check this link:
https://pouchdb.com/2015/05/18/we-have-a-problem-with-promises.html
If you want you can use reduce to make a sequential promise, for example:
[2,3,4,5,6,7,8,9].reduce((promises, page) => {
return promises.then((page) => {
console.log(page);
return Promise.resolve(page+1);
});
}, Promise.resolve(1));
it'll always works in sequential.
I really liked #joelnet's answer, but to me, that style of coding is a little bit tough to digest, so I spent a couple of days trying to figure out how I would express the same solution in a more readable manner and this is my take, just with a different syntax and some comments.
// first take your work
const urls = ['/url1', '/url2', '/url3', '/url4']
// next convert each item to a function that returns a promise
const functions = urls.map((url) => {
// For every url we return a new function
return () => {
return new Promise((resolve) => {
// random wait in milliseconds
const randomWait = parseInt((Math.random() * 1000),10)
console.log('waiting to resolve in ms', randomWait)
setTimeout(()=>resolve({randomWait, url}),randomWait)
})
}
})
const promiseReduce = (acc, next) => {
// we wait for the accumulator to resolve it's promise
return acc.then((accResult) => {
// and then we return a new promise that will become
// the new value for the accumulator
return next().then((nextResult) => {
// that eventually will resolve to a new array containing
// the value of the two promises
return accResult.concat(nextResult)
})
})
};
// the accumulator will always be a promise that resolves to an array
const accumulator = Promise.resolve([])
// we call reduce with the reduce function and the accumulator initial value
functions.reduce(promiseReduce, accumulator)
.then((result) => {
// let's display the final value here
console.log('=== The final result ===')
console.log(result)
})
As Bergi noticed, I think the best and clear solution is use BlueBird.each, code below:
const BlueBird = require('bluebird');
BlueBird.each(files, fs.readFileAsync);
I find myself coming back to this question many times and the answers aren't exactly giving me what I need, so putting this here for anyone that needs this too.
The code below does sequential promises execution (one after another), and each round consists of multiple callings:
async function sequence(list, cb) {
const result = [];
await list.reduce(async (promise, item) => promise
.then(() => cb(item))
.then((res) => result.push(res)
), Promise.resolve());
return result;
}
Showcase:
<script src="https://cdnjs.cloudflare.com/ajax/libs/axios/0.15.3/axios.min.js"></script>
<script src="https://unpkg.com/#babel/standalone#7/babel.min.js"></script>
<script type="text/babel">
function sleep(ms) {
return new Promise(resolve => setTimeout(resolve, ms));
}
async function readFile(url, index) {
console.log('Running index: ', index);
// First action
const firstTime = await axios.get(url);
console.log('First API response: ', firstTime.data.activity);
// Second action
await sleep(1000);
// Third action
const secondTime = await axios.get(url);
console.log('Second API response: ', secondTime.data.activity);
// Fourth action
await sleep(1000);
return secondTime.data;
}
async function sequence(urls, fn) {
const result = [];
await urls.reduce(async (promise, url, index) => promise.then(() => fn(url, index)).then((res) => result.push(res)), Promise.resolve());
return result;
}
const urls = [
'https://www.boredapi.com/api/activity',
'https://www.boredapi.com/api/activity',
'https://www.boredapi.com/api/activity',
];
(async function init() {
const result = await sequence(urls, readFile);
console.log('result', result);
})()
</script>
I use the following code to extend the Promise object. It handles rejection of the promises and returns an array of results
Code
/*
Runs tasks in sequence and resolves a promise upon finish
tasks: an array of functions that return a promise upon call.
parameters: an array of arrays corresponding to the parameters to be passed on each function call.
context: Object to use as context to call each function. (The 'this' keyword that may be used inside the function definition)
*/
Promise.sequence = function(tasks, parameters = [], context = null) {
return new Promise((resolve, reject)=>{
var nextTask = tasks.splice(0,1)[0].apply(context, parameters[0]); //Dequeue and call the first task
var output = new Array(tasks.length + 1);
var errorFlag = false;
tasks.forEach((task, index) => {
nextTask = nextTask.then(r => {
output[index] = r;
return task.apply(context, parameters[index+1]);
}, e=>{
output[index] = e;
errorFlag = true;
return task.apply(context, parameters[index+1]);
});
});
// Last task
nextTask.then(r=>{
output[output.length - 1] = r;
if (errorFlag) reject(output); else resolve(output);
})
.catch(e=>{
output[output.length - 1] = e;
reject(output);
});
});
};
Example
function functionThatReturnsAPromise(n) {
return new Promise((resolve, reject)=>{
//Emulating real life delays, like a web request
setTimeout(()=>{
resolve(n);
}, 1000);
});
}
var arrayOfArguments = [['a'],['b'],['c'],['d']];
var arrayOfFunctions = (new Array(4)).fill(functionThatReturnsAPromise);
Promise.sequence(arrayOfFunctions, arrayOfArguments)
.then(console.log)
.catch(console.error);
Your approach is not bad, but it does have two issues: it swallows errors and it employs the Explicit Promise Construction Antipattern.
You can solve both of these issues, and make the code cleaner, while still employing the same general strategy:
var Q = require("q");
var readFile = function(file) {
... // Returns a promise.
};
var readFiles = function(files) {
var readSequential = function(index) {
if (index < files.length) {
return readFile(files[index]).then(function() {
return readSequential(index + 1);
});
}
};
// using Promise.resolve() here in case files.length is 0
return Promise.resolve(readSequential(0)); // Start!
};
This is my sequentially implementation that I use in various projects:
const file = [file1, file2, file3];
const fileContents = sequentially(readFile, files);
// somewhere else in the code:
export const sequentially = async <T, P>(
toPromise: (element: T) => Promise<P>,
elements: T[]
): Promise<P[]> => {
const results: P[] = [];
await elements.reduce(async (sequence, element) => {
await sequence;
results.push(await toPromise(element));
}, Promise.resolve());
return results;
};
Here is my Angular/TypeScript approach, using RxJS:
Given an array of URL strings, convert it into an Observable using the from function.
Use pipe to wrap the Ajax request, immediate response logic, any desired delay, and error handling.
Inside of the pipe, use concatMap to serialize the requests. Otherwise, using Javascript forEach or map would make the requests at the same time.
Use RxJS ajax to make the call, and also to add any desired delay after each call returns.
Working example: https://stackblitz.com/edit/rxjs-bnrkix?file=index.ts
The code looks like this (I left in some extras so you can choose what to keep or discard):
import { ajax } from 'rxjs/ajax';
import { catchError, concatMap, delay, from, of, map, Observable } from 'rxjs';
const urls = [
'https://randomuser.me/api/',
'https://randomuser.me/api/',
'https://randomuser.me/api/',
];
const delayAfterCall = 500;
from(urls)
.pipe(
concatMap((url: string) => {
return ajax.getJSON(url).pipe(
map((response) => {
console.log('Done! Received:', response);
return response;
}),
catchError((error) => {
console.error('Error: ', error);
return of(error);
}),
delay(delayAfterCall)
);
})
)
.subscribe((response) => {
console.log('received email:', response.results[0].email);
});
On the basis of the question's title, "Resolve promises one after another (i.e. in sequence)?", we might understand that the OP is more interested in the sequential handling of promises on settlement than sequential calls per se.
This answer is offered :
to demonstrate that sequential calls are not necessary for sequential handling of responses.
to expose viable alternative patterns to this page's visitors - including the OP if he is still interested over a year later.
despite the OP's assertion that he does not want to make calls concurrently, which may genuinely be the case but equally may be an assumption based on the desire for sequential handling of responses as the title implies.
If concurrent calls are genuinely not wanted then see Benjamin Gruenbaum's answer which covers sequential calls (etc) comprehensively.
If however, you are interested (for improved performance) in patterns which allow concurrent calls followed by sequential handling of responses, then please read on.
It's tempting to think you have to use Promise.all(arr.map(fn)).then(fn) (as I have done many times) or a Promise lib's fancy sugar (notably Bluebird's), however (with credit to this article) an arr.map(fn).reduce(fn) pattern will do the job, with the advantages that it :
works with any promise lib - even pre-compliant versions of jQuery - only .then() is used.
affords the flexibility to skip-over-error or stop-on-error, whichever you want with a one line mod.
Here it is, written for Q.
var readFiles = function(files) {
return files.map(readFile) //Make calls in parallel.
.reduce(function(sequence, filePromise) {
return sequence.then(function() {
return filePromise;
}).then(function(file) {
//Do stuff with file ... in the correct sequence!
}, function(error) {
console.log(error); //optional
return sequence;//skip-over-error. To stop-on-error, `return error` (jQuery), or `throw error` (Promises/A+).
});
}, Q()).then(function() {
// all done.
});
};
Note: only that one fragment, Q(), is specific to Q. For jQuery you need to ensure that readFile() returns a jQuery promise. With A+ libs, foreign promises will be assimilated.
The key here is the reduction's sequence promise, which sequences the handling of the readFile promises but not their creation.
And once you have absorbed that, it's maybe slightly mind-blowing when you realise that the .map() stage isn't actually necessary! The whole job, parallel calls plus serial handling in the correct order, can be achieved with reduce() alone, plus the added advantage of further flexibility to :
convert from parallel async calls to serial async calls by simply moving one line - potentially useful during development.
Here it is, for Q again.
var readFiles = function(files) {
return files.reduce(function(sequence, f) {
var filePromise = readFile(f);//Make calls in parallel. To call sequentially, move this line down one.
return sequence.then(function() {
return filePromise;
}).then(function(file) {
//Do stuff with file ... in the correct sequence!
}, function(error) {
console.log(error); //optional
return sequence;//Skip over any errors. To stop-on-error, `return error` (jQuery), or `throw error` (Promises/A+).
});
}, Q()).then(function() {
// all done.
});
};
That's the basic pattern. If you wanted also to deliver data (eg the files or some transform of them) to the caller, you would need a mild variant.
If someone else needs a guaranteed way of STRICTLY sequential way of resolving Promises when performing CRUD operations you also can use the following code as a basis.
As long as you add 'return' before calling each function, describing a Promise, and use this example as a basis the next .then() function call will CONSISTENTLY start after the completion of the previous one:
getRidOfOlderShoutsPromise = () => {
return readShoutsPromise('BEFORE')
.then(() => {
return deleteOlderShoutsPromise();
})
.then(() => {
return readShoutsPromise('AFTER')
})
.catch(err => console.log(err.message));
}
deleteOlderShoutsPromise = () => {
return new Promise ( (resolve, reject) => {
console.log("in deleteOlderShouts");
let d = new Date();
let TwoMinuteAgo = d - 1000 * 90 ;
All_Shouts.deleteMany({ dateTime: {$lt: TwoMinuteAgo}}, function(err) {
if (err) reject();
console.log("DELETED OLDs at "+d);
resolve();
});
});
}
readShoutsPromise = (tex) => {
return new Promise( (resolve, reject) => {
console.log("in readShoutsPromise -"+tex);
All_Shouts
.find({})
.sort([['dateTime', 'ascending']])
.exec(function (err, data){
if (err) reject();
let d = new Date();
console.log("shouts "+tex+" delete PROMISE = "+data.length +"; date ="+d);
resolve(data);
});
});
}
Array push and pop method can be used for sequence of promises. You can also push new promises when you need additional data. This is the code, I will use in React Infinite loader to load sequence of pages.
var promises = [Promise.resolve()];
function methodThatReturnsAPromise(page) {
return new Promise((resolve, reject) => {
setTimeout(() => {
console.log(`Resolve-${page}! ${new Date()} `);
resolve();
}, 1000);
});
}
function pushPromise(page) {
promises.push(promises.pop().then(function () {
return methodThatReturnsAPromise(page)
}));
}
pushPromise(1);
pushPromise(2);
pushPromise(3);
(function() {
function sleep(ms) {
return new Promise(function(resolve) {
setTimeout(function() {
return resolve();
}, ms);
});
}
function serial(arr, index, results) {
if (index == arr.length) {
return Promise.resolve(results);
}
return new Promise(function(resolve, reject) {
if (!index) {
index = 0;
results = [];
}
return arr[index]()
.then(function(d) {
return resolve(d);
})
.catch(function(err) {
return reject(err);
});
})
.then(function(result) {
console.log("here");
results.push(result);
return serial(arr, index + 1, results);
})
.catch(function(err) {
throw err;
});
}
const a = [5000, 5000, 5000];
serial(a.map(x => () => sleep(x)));
})();
Here the key is how you call the sleep function. You need to pass an array of functions which itself returns a promise instead of an array of promises.
Consider the following code that reads an array of files in a serial/sequential manner. readFiles returns a promise, which is resolved only once all files have been read in sequence.
var readFile = function(file) {
... // Returns a promise.
};
var readFiles = function(files) {
return new Promise((resolve, reject) => {
var readSequential = function(index) {
if (index >= files.length) {
resolve();
} else {
readFile(files[index]).then(function() {
readSequential(index + 1);
}).catch(reject);
}
};
readSequential(0); // Start with the first file!
});
};
The above code works, but I don't like having to do recursion for things to occur sequentially. Is there a simpler way that this code can be re-written so that I don't have to use my weird readSequential function?
Originally I tried to use Promise.all, but that caused all of the readFile calls to happen concurrently, which is not what I want:
var readFiles = function(files) {
return Promise.all(files.map(function(file) {
return readFile(file);
}));
};
Update 2017: I would use an async function if the environment supports it:
async function readFiles(files) {
for(const file of files) {
await readFile(file);
}
};
If you'd like, you can defer reading the files until you need them using an async generator (if your environment supports it):
async function* readFiles(files) {
for(const file of files) {
yield await readFile(file);
}
};
Update: In second thought - I might use a for loop instead:
var readFiles = function(files) {
var p = Promise.resolve(); // Q() in q
files.forEach(file =>
p = p.then(() => readFile(file));
);
return p;
};
Or more compactly, with reduce:
var readFiles = function(files) {
return files.reduce((p, file) => {
return p.then(() => readFile(file));
}, Promise.resolve()); // initial
};
In other promise libraries (like when and Bluebird) you have utility methods for this.
For example, Bluebird would be:
var Promise = require("bluebird");
var fs = Promise.promisifyAll(require("fs"));
var readAll = Promise.resolve(files).map(fs.readFileAsync,{concurrency: 1 });
// if the order matters, you can use Promise.each instead and omit concurrency param
readAll.then(function(allFileContents){
// do stuff to read files.
});
Although there is really no reason not to use async await today.
Here is how I prefer to run tasks in series.
function runSerial() {
var that = this;
// task1 is a function that returns a promise (and immediately starts executing)
// task2 is a function that returns a promise (and immediately starts executing)
return Promise.resolve()
.then(function() {
return that.task1();
})
.then(function() {
return that.task2();
})
.then(function() {
console.log(" ---- done ----");
});
}
What about cases with more tasks? Like, 10?
function runSerial(tasks) {
var result = Promise.resolve();
tasks.forEach(task => {
result = result.then(() => task());
});
return result;
}
This question is old, but we live in a world of ES6 and functional JavaScript, so let's see how we can improve.
Because promises execute immediately, we can't just create an array of promises, they would all fire off in parallel.
Instead, we need to create an array of functions that returns a promise. Each function will then be executed sequentially, which then starts the promise inside.
We can solve this a few ways, but my favorite way is to use reduce.
It gets a little tricky using reduce in combination with promises, so I have broken down the one liner into some smaller digestible bites below.
The essence of this function is to use reduce starting with an initial value of Promise.resolve([]), or a promise containing an empty array.
This promise will then be passed into the reduce method as promise. This is the key to chaining each promise together sequentially. The next promise to execute is func and when the then fires, the results are concatenated and that promise is then returned, executing the reduce cycle with the next promise function.
Once all promises have executed, the returned promise will contain an array of all the results of each promise.
ES6 Example (one liner)
/*
* serial executes Promises sequentially.
* #param {funcs} An array of funcs that return promises.
* #example
* const urls = ['/url1', '/url2', '/url3']
* serial(urls.map(url => () => $.ajax(url)))
* .then(console.log.bind(console))
*/
const serial = funcs =>
funcs.reduce((promise, func) =>
promise.then(result => func().then(Array.prototype.concat.bind(result))), Promise.resolve([]))
ES6 Example (broken down)
// broken down to for easier understanding
const concat = list => Array.prototype.concat.bind(list)
const promiseConcat = f => x => f().then(concat(x))
const promiseReduce = (acc, x) => acc.then(promiseConcat(x))
/*
* serial executes Promises sequentially.
* #param {funcs} An array of funcs that return promises.
* #example
* const urls = ['/url1', '/url2', '/url3']
* serial(urls.map(url => () => $.ajax(url)))
* .then(console.log.bind(console))
*/
const serial = funcs => funcs.reduce(promiseReduce, Promise.resolve([]))
Usage:
// first take your work
const urls = ['/url1', '/url2', '/url3', '/url4']
// next convert each item to a function that returns a promise
const funcs = urls.map(url => () => $.ajax(url))
// execute them serially
serial(funcs)
.then(console.log.bind(console))
To do this simply in ES6:
function(files) {
// Create a new empty promise (don't do that with real people ;)
var sequence = Promise.resolve();
// Loop over each file, and add on a promise to the
// end of the 'sequence' promise.
files.forEach(file => {
// Chain one computation onto the sequence
sequence =
sequence
.then(() => performComputation(file))
.then(result => doSomething(result));
// Resolves for each file, one at a time.
})
// This will resolve after the entire chain is resolved
return sequence;
}
Addition example
const addTwo = async () => 2;
const addThree = async (inValue) => new Promise((resolve) => setTimeout(resolve(inValue + 3), 2000));
const addFour = (inValue) => new Promise((res) => setTimeout(res(inValue + 4), 1000));
const addFive = async (inValue) => inValue + 5;
// Function which handles promises from above
async function sequenceAddition() {
let sum = await [addTwo, addThree, addFour, addFive].reduce(
(promise, currPromise) => promise.then((val) => currPromise(val)),
Promise.resolve()
);
console.log('sum:', sum); // 2 + 3 + 4 + 5 = 14
}
// Run function. See console for result.
sequenceAddition();
General syntax to use reduce()
function sequence(tasks, fn) {
return tasks.reduce((promise, task) => promise.then(() => fn(task)), Promise.resolve());
}
UPDATE
items-promise is a ready to use NPM package doing the same.
I've had to run a lot of sequential tasks and used these answers to forge a function that would take care of handling any sequential task...
function one_by_one(objects_array, iterator, callback) {
var start_promise = objects_array.reduce(function (prom, object) {
return prom.then(function () {
return iterator(object);
});
}, Promise.resolve()); // initial
if(callback){
start_promise.then(callback);
}else{
return start_promise;
}
}
The function takes 2 arguments + 1 optional. First argument is the array on which we will be working. The second argument is the task itself, a function that returns a promise, the next task will be started only when this promise resolves. The third argument is a callback to run when all tasks have been done. If no callback is passed, then the function returns the promise it created so we can handle the end.
Here's an example of usage:
var filenames = ['1.jpg','2.jpg','3.jpg'];
var resize_task = function(filename){
//return promise of async resizing with filename
};
one_by_one(filenames,resize_task );
Hope it saves someone some time...
With Async/Await (if you have the support of ES7)
function downloadFile(fileUrl) { ... } // This function return a Promise
async function main()
{
var filesList = [...];
for (const file of filesList) {
await downloadFile(file);
}
}
(you must use for loop, and not forEach because async/await has problems running in forEach loop)
Without Async/Await (using Promise)
function downloadFile(fileUrl) { ... } // This function return a Promise
function downloadRecursion(filesList, index)
{
index = index || 0;
if (index < filesList.length)
{
downloadFile(filesList[index]).then(function()
{
index++;
downloadRecursion(filesList, index); // self invocation - recursion!
});
}
else
{
return Promise.resolve();
}
}
function main()
{
var filesList = [...];
downloadRecursion(filesList);
}
My preferred solution:
function processArray(arr, fn) {
return arr.reduce(
(p, v) => p.then((a) => fn(v).then(r => a.concat([r]))),
Promise.resolve([])
);
}
It's not fundamentally different from others published here but:
Applies the function to items in series
Resolves to an array of results
Doesn't require async/await (support is still quite limited, circa 2017)
Uses arrow functions; nice and concise
Example usage:
const numbers = [0, 4, 20, 100];
const multiplyBy3 = (x) => new Promise(res => res(x * 3));
// Prints [ 0, 12, 60, 300 ]
processArray(numbers, multiplyBy3).then(console.log);
Tested on reasonable current Chrome (v59) and NodeJS (v8.1.2).
First, you need to understand that a promise is executed at the time of creation.
So for example if you have a code:
["a","b","c"].map(x => returnsPromise(x))
You need to change it to:
["a","b","c"].map(x => () => returnsPromise(x))
Then we need to sequentially chain promises:
["a", "b", "c"].map(x => () => returnsPromise(x))
.reduce(
(before, after) => before.then(_ => after()),
Promise.resolve()
)
executing after(), will make sure that promise is created (and executed) only when its time comes.
Nicest solution that I was able to figure out was with bluebird promises. You can just do Promise.resolve(files).each(fs.readFileAsync); which guarantees that promises are resolved sequentially in order.
With async/await of ES2016 (and maybe some features of ES2018), this can be reduced to this form:
function readFile(file) {
... // Returns a promise.
}
async function readFiles(files) {
for (file in files) {
await readFile(file)
}
}
I haven't seen another answer express that simplicity. The OP said parallel execution of readFile was not desired. However, with IO like this it really makes sense to not be blocking on a single file read, while keeping the loop execution synchronous (you don't want to do the next step until all files have been read). Since I just learned about this and am a bit excited about it, I'll share that approach of parallel asynchronous execution of readFile with overall synchronous execution of readFiles.
async function readFiles(files) {
await Promise.all(files.map(readFile))
}
Isn't that a thing of beauty?
This is a slight variation of another answer above. Using native Promises:
function inSequence(tasks) {
return tasks.reduce((p, task) => p.then(task), Promise.resolve())
}
Explanation
If you have these tasks [t1, t2, t3], then the above is equivalent to Promise.resolve().then(t1).then(t2).then(t3). It's the behavior of reduce.
How to use
First You need to construct a list of tasks! A task is a function that accepts no argument. If you need to pass arguments to your function, then use bind or other methods to create a task. For example:
var tasks = files.map(file => processFile.bind(null, file))
inSequence(tasks).then(...)
I created this simple method on the Promise object:
Create and add a Promise.sequence method to the Promise object
Promise.sequence = function (chain) {
var results = [];
var entries = chain;
if (entries.entries) entries = entries.entries();
return new Promise(function (yes, no) {
var next = function () {
var entry = entries.next();
if(entry.done) yes(results);
else {
results.push(entry.value[1]().then(next, function() { no(results); } ));
}
};
next();
});
};
Usage:
var todo = [];
todo.push(firstPromise);
if (someCriterium) todo.push(optionalPromise);
todo.push(lastPromise);
// Invoking them
Promise.sequence(todo)
.then(function(results) {}, function(results) {});
The best thing about this extension to the Promise object, is that it is consistent with the style of promises. Promise.all and Promise.sequence is invoked the same way, but have different semantics.
Caution
Sequential running of promises is not usually a very good way to use promises. It's usually better to use Promise.all, and let the browser run the code as fast as possible. However, there are real use cases for it - for example when writing a mobile app using javascript.
My answer based on https://stackoverflow.com/a/31070150/7542429.
Promise.series = function series(arrayOfPromises) {
var results = [];
return arrayOfPromises.reduce(function(seriesPromise, promise) {
return seriesPromise.then(function() {
return promise
.then(function(result) {
results.push(result);
});
});
}, Promise.resolve())
.then(function() {
return results;
});
};
This solution returns the results as an array like Promise.all().
Usage:
Promise.series([array of promises])
.then(function(results) {
// do stuff with results here
});
Use Array.prototype.reduce, and remember to wrap your promises in a function otherwise they will already be running!
// array of Promise providers
const providers = [
function(){
return Promise.resolve(1);
},
function(){
return Promise.resolve(2);
},
function(){
return Promise.resolve(3);
}
]
const inSeries = function(providers){
const seed = Promise.resolve(null);
return providers.reduce(function(a,b){
return a.then(b);
}, seed);
};
nice and easy...
you should be able to re-use the same seed for performance, etc.
It's important to guard against empty arrays or arrays with only 1 element when using reduce, so this technique is your best bet:
const providers = [
function(v){
return Promise.resolve(v+1);
},
function(v){
return Promise.resolve(v+2);
},
function(v){
return Promise.resolve(v+3);
}
]
const inSeries = function(providers, initialVal){
if(providers.length < 1){
return Promise.resolve(null)
}
return providers.reduce((a,b) => a.then(b), providers.shift()(initialVal));
};
and then call it like:
inSeries(providers, 1).then(v => {
console.log(v); // 7
});
Using modern ES:
const series = async (tasks) => {
const results = [];
for (const task of tasks) {
const result = await task;
results.push(result);
}
return results;
};
//...
const readFiles = await series(files.map(readFile));
Most of the answers dont include the results of ALL promises individually, so in case someone is looking for this particular behaviour, this is a possible solution using recursion.
It follows the style of Promise.all:
Returns the array of results in the .then() callback.
If some promise fails, its returned immediately in the .catch() callback.
const promiseEach = (arrayOfTasks) => {
let results = []
return new Promise((resolve, reject) => {
const resolveNext = (arrayOfTasks) => {
// If all tasks are already resolved, return the final array of results
if (arrayOfTasks.length === 0) return resolve(results)
// Extract first promise and solve it
const first = arrayOfTasks.shift()
first().then((res) => {
results.push(res)
resolveNext(arrayOfTasks)
}).catch((err) => {
reject(err)
})
}
resolveNext(arrayOfTasks)
})
}
// Lets try it 😎
const promise = (time, shouldThrowError) => new Promise((resolve, reject) => {
const timeInMs = time * 1000
setTimeout(()=>{
console.log(`Waited ${time} secs`)
if (shouldThrowError) reject(new Error('Promise failed'))
resolve(time)
}, timeInMs)
})
const tasks = [() => promise(1), () => promise(2)]
promiseEach(tasks)
.then((res) => {
console.log(res) // [1, 2]
})
// Oops some promise failed
.catch((error) => {
console.log(error)
})
Note about the tasks array declaration:
In this case is not possible to use the following notation like Promise.all would use:
const tasks = [promise(1), promise(2)]
And we have to use:
const tasks = [() => promise(1), () => promise(2)]
The reason is that JavaScript starts executing the promise immediatelly after its declared. If we use methods like Promise.all, it just checks that the state of all of them is fulfilled or rejected, but doesnt start the exection itself. Using () => promise() we stop the execution until its called.
You can use this function that gets promiseFactories List:
function executeSequentially(promiseFactories) {
var result = Promise.resolve();
promiseFactories.forEach(function (promiseFactory) {
result = result.then(promiseFactory);
});
return result;
}
Promise Factory is just simple function that returns a Promise:
function myPromiseFactory() {
return somethingThatCreatesAPromise();
}
It works because a promise factory doesn't create the promise until it's asked to. It works the same way as a then function – in fact, it's the same thing!
You don't want to operate over an array of promises at all. Per the Promise spec, as soon as a promise is created, it begins executing. So what you really want is an array of promise factories...
If you want to learn more on Promises, you should check this link:
https://pouchdb.com/2015/05/18/we-have-a-problem-with-promises.html
If you want you can use reduce to make a sequential promise, for example:
[2,3,4,5,6,7,8,9].reduce((promises, page) => {
return promises.then((page) => {
console.log(page);
return Promise.resolve(page+1);
});
}, Promise.resolve(1));
it'll always works in sequential.
I really liked #joelnet's answer, but to me, that style of coding is a little bit tough to digest, so I spent a couple of days trying to figure out how I would express the same solution in a more readable manner and this is my take, just with a different syntax and some comments.
// first take your work
const urls = ['/url1', '/url2', '/url3', '/url4']
// next convert each item to a function that returns a promise
const functions = urls.map((url) => {
// For every url we return a new function
return () => {
return new Promise((resolve) => {
// random wait in milliseconds
const randomWait = parseInt((Math.random() * 1000),10)
console.log('waiting to resolve in ms', randomWait)
setTimeout(()=>resolve({randomWait, url}),randomWait)
})
}
})
const promiseReduce = (acc, next) => {
// we wait for the accumulator to resolve it's promise
return acc.then((accResult) => {
// and then we return a new promise that will become
// the new value for the accumulator
return next().then((nextResult) => {
// that eventually will resolve to a new array containing
// the value of the two promises
return accResult.concat(nextResult)
})
})
};
// the accumulator will always be a promise that resolves to an array
const accumulator = Promise.resolve([])
// we call reduce with the reduce function and the accumulator initial value
functions.reduce(promiseReduce, accumulator)
.then((result) => {
// let's display the final value here
console.log('=== The final result ===')
console.log(result)
})
As Bergi noticed, I think the best and clear solution is use BlueBird.each, code below:
const BlueBird = require('bluebird');
BlueBird.each(files, fs.readFileAsync);
I find myself coming back to this question many times and the answers aren't exactly giving me what I need, so putting this here for anyone that needs this too.
The code below does sequential promises execution (one after another), and each round consists of multiple callings:
async function sequence(list, cb) {
const result = [];
await list.reduce(async (promise, item) => promise
.then(() => cb(item))
.then((res) => result.push(res)
), Promise.resolve());
return result;
}
Showcase:
<script src="https://cdnjs.cloudflare.com/ajax/libs/axios/0.15.3/axios.min.js"></script>
<script src="https://unpkg.com/#babel/standalone#7/babel.min.js"></script>
<script type="text/babel">
function sleep(ms) {
return new Promise(resolve => setTimeout(resolve, ms));
}
async function readFile(url, index) {
console.log('Running index: ', index);
// First action
const firstTime = await axios.get(url);
console.log('First API response: ', firstTime.data.activity);
// Second action
await sleep(1000);
// Third action
const secondTime = await axios.get(url);
console.log('Second API response: ', secondTime.data.activity);
// Fourth action
await sleep(1000);
return secondTime.data;
}
async function sequence(urls, fn) {
const result = [];
await urls.reduce(async (promise, url, index) => promise.then(() => fn(url, index)).then((res) => result.push(res)), Promise.resolve());
return result;
}
const urls = [
'https://www.boredapi.com/api/activity',
'https://www.boredapi.com/api/activity',
'https://www.boredapi.com/api/activity',
];
(async function init() {
const result = await sequence(urls, readFile);
console.log('result', result);
})()
</script>
I use the following code to extend the Promise object. It handles rejection of the promises and returns an array of results
Code
/*
Runs tasks in sequence and resolves a promise upon finish
tasks: an array of functions that return a promise upon call.
parameters: an array of arrays corresponding to the parameters to be passed on each function call.
context: Object to use as context to call each function. (The 'this' keyword that may be used inside the function definition)
*/
Promise.sequence = function(tasks, parameters = [], context = null) {
return new Promise((resolve, reject)=>{
var nextTask = tasks.splice(0,1)[0].apply(context, parameters[0]); //Dequeue and call the first task
var output = new Array(tasks.length + 1);
var errorFlag = false;
tasks.forEach((task, index) => {
nextTask = nextTask.then(r => {
output[index] = r;
return task.apply(context, parameters[index+1]);
}, e=>{
output[index] = e;
errorFlag = true;
return task.apply(context, parameters[index+1]);
});
});
// Last task
nextTask.then(r=>{
output[output.length - 1] = r;
if (errorFlag) reject(output); else resolve(output);
})
.catch(e=>{
output[output.length - 1] = e;
reject(output);
});
});
};
Example
function functionThatReturnsAPromise(n) {
return new Promise((resolve, reject)=>{
//Emulating real life delays, like a web request
setTimeout(()=>{
resolve(n);
}, 1000);
});
}
var arrayOfArguments = [['a'],['b'],['c'],['d']];
var arrayOfFunctions = (new Array(4)).fill(functionThatReturnsAPromise);
Promise.sequence(arrayOfFunctions, arrayOfArguments)
.then(console.log)
.catch(console.error);
Your approach is not bad, but it does have two issues: it swallows errors and it employs the Explicit Promise Construction Antipattern.
You can solve both of these issues, and make the code cleaner, while still employing the same general strategy:
var Q = require("q");
var readFile = function(file) {
... // Returns a promise.
};
var readFiles = function(files) {
var readSequential = function(index) {
if (index < files.length) {
return readFile(files[index]).then(function() {
return readSequential(index + 1);
});
}
};
// using Promise.resolve() here in case files.length is 0
return Promise.resolve(readSequential(0)); // Start!
};
This is my sequentially implementation that I use in various projects:
const file = [file1, file2, file3];
const fileContents = sequentially(readFile, files);
// somewhere else in the code:
export const sequentially = async <T, P>(
toPromise: (element: T) => Promise<P>,
elements: T[]
): Promise<P[]> => {
const results: P[] = [];
await elements.reduce(async (sequence, element) => {
await sequence;
results.push(await toPromise(element));
}, Promise.resolve());
return results;
};
Here is my Angular/TypeScript approach, using RxJS:
Given an array of URL strings, convert it into an Observable using the from function.
Use pipe to wrap the Ajax request, immediate response logic, any desired delay, and error handling.
Inside of the pipe, use concatMap to serialize the requests. Otherwise, using Javascript forEach or map would make the requests at the same time.
Use RxJS ajax to make the call, and also to add any desired delay after each call returns.
Working example: https://stackblitz.com/edit/rxjs-bnrkix?file=index.ts
The code looks like this (I left in some extras so you can choose what to keep or discard):
import { ajax } from 'rxjs/ajax';
import { catchError, concatMap, delay, from, of, map, Observable } from 'rxjs';
const urls = [
'https://randomuser.me/api/',
'https://randomuser.me/api/',
'https://randomuser.me/api/',
];
const delayAfterCall = 500;
from(urls)
.pipe(
concatMap((url: string) => {
return ajax.getJSON(url).pipe(
map((response) => {
console.log('Done! Received:', response);
return response;
}),
catchError((error) => {
console.error('Error: ', error);
return of(error);
}),
delay(delayAfterCall)
);
})
)
.subscribe((response) => {
console.log('received email:', response.results[0].email);
});
On the basis of the question's title, "Resolve promises one after another (i.e. in sequence)?", we might understand that the OP is more interested in the sequential handling of promises on settlement than sequential calls per se.
This answer is offered :
to demonstrate that sequential calls are not necessary for sequential handling of responses.
to expose viable alternative patterns to this page's visitors - including the OP if he is still interested over a year later.
despite the OP's assertion that he does not want to make calls concurrently, which may genuinely be the case but equally may be an assumption based on the desire for sequential handling of responses as the title implies.
If concurrent calls are genuinely not wanted then see Benjamin Gruenbaum's answer which covers sequential calls (etc) comprehensively.
If however, you are interested (for improved performance) in patterns which allow concurrent calls followed by sequential handling of responses, then please read on.
It's tempting to think you have to use Promise.all(arr.map(fn)).then(fn) (as I have done many times) or a Promise lib's fancy sugar (notably Bluebird's), however (with credit to this article) an arr.map(fn).reduce(fn) pattern will do the job, with the advantages that it :
works with any promise lib - even pre-compliant versions of jQuery - only .then() is used.
affords the flexibility to skip-over-error or stop-on-error, whichever you want with a one line mod.
Here it is, written for Q.
var readFiles = function(files) {
return files.map(readFile) //Make calls in parallel.
.reduce(function(sequence, filePromise) {
return sequence.then(function() {
return filePromise;
}).then(function(file) {
//Do stuff with file ... in the correct sequence!
}, function(error) {
console.log(error); //optional
return sequence;//skip-over-error. To stop-on-error, `return error` (jQuery), or `throw error` (Promises/A+).
});
}, Q()).then(function() {
// all done.
});
};
Note: only that one fragment, Q(), is specific to Q. For jQuery you need to ensure that readFile() returns a jQuery promise. With A+ libs, foreign promises will be assimilated.
The key here is the reduction's sequence promise, which sequences the handling of the readFile promises but not their creation.
And once you have absorbed that, it's maybe slightly mind-blowing when you realise that the .map() stage isn't actually necessary! The whole job, parallel calls plus serial handling in the correct order, can be achieved with reduce() alone, plus the added advantage of further flexibility to :
convert from parallel async calls to serial async calls by simply moving one line - potentially useful during development.
Here it is, for Q again.
var readFiles = function(files) {
return files.reduce(function(sequence, f) {
var filePromise = readFile(f);//Make calls in parallel. To call sequentially, move this line down one.
return sequence.then(function() {
return filePromise;
}).then(function(file) {
//Do stuff with file ... in the correct sequence!
}, function(error) {
console.log(error); //optional
return sequence;//Skip over any errors. To stop-on-error, `return error` (jQuery), or `throw error` (Promises/A+).
});
}, Q()).then(function() {
// all done.
});
};
That's the basic pattern. If you wanted also to deliver data (eg the files or some transform of them) to the caller, you would need a mild variant.
If someone else needs a guaranteed way of STRICTLY sequential way of resolving Promises when performing CRUD operations you also can use the following code as a basis.
As long as you add 'return' before calling each function, describing a Promise, and use this example as a basis the next .then() function call will CONSISTENTLY start after the completion of the previous one:
getRidOfOlderShoutsPromise = () => {
return readShoutsPromise('BEFORE')
.then(() => {
return deleteOlderShoutsPromise();
})
.then(() => {
return readShoutsPromise('AFTER')
})
.catch(err => console.log(err.message));
}
deleteOlderShoutsPromise = () => {
return new Promise ( (resolve, reject) => {
console.log("in deleteOlderShouts");
let d = new Date();
let TwoMinuteAgo = d - 1000 * 90 ;
All_Shouts.deleteMany({ dateTime: {$lt: TwoMinuteAgo}}, function(err) {
if (err) reject();
console.log("DELETED OLDs at "+d);
resolve();
});
});
}
readShoutsPromise = (tex) => {
return new Promise( (resolve, reject) => {
console.log("in readShoutsPromise -"+tex);
All_Shouts
.find({})
.sort([['dateTime', 'ascending']])
.exec(function (err, data){
if (err) reject();
let d = new Date();
console.log("shouts "+tex+" delete PROMISE = "+data.length +"; date ="+d);
resolve(data);
});
});
}
Array push and pop method can be used for sequence of promises. You can also push new promises when you need additional data. This is the code, I will use in React Infinite loader to load sequence of pages.
var promises = [Promise.resolve()];
function methodThatReturnsAPromise(page) {
return new Promise((resolve, reject) => {
setTimeout(() => {
console.log(`Resolve-${page}! ${new Date()} `);
resolve();
}, 1000);
});
}
function pushPromise(page) {
promises.push(promises.pop().then(function () {
return methodThatReturnsAPromise(page)
}));
}
pushPromise(1);
pushPromise(2);
pushPromise(3);
(function() {
function sleep(ms) {
return new Promise(function(resolve) {
setTimeout(function() {
return resolve();
}, ms);
});
}
function serial(arr, index, results) {
if (index == arr.length) {
return Promise.resolve(results);
}
return new Promise(function(resolve, reject) {
if (!index) {
index = 0;
results = [];
}
return arr[index]()
.then(function(d) {
return resolve(d);
})
.catch(function(err) {
return reject(err);
});
})
.then(function(result) {
console.log("here");
results.push(result);
return serial(arr, index + 1, results);
})
.catch(function(err) {
throw err;
});
}
const a = [5000, 5000, 5000];
serial(a.map(x => () => sleep(x)));
})();
Here the key is how you call the sleep function. You need to pass an array of functions which itself returns a promise instead of an array of promises.
As far as I know, there are two options about promise:
promise.all()
promise.race()
Ok, I know what promise.all() does. It runs promises in parallel, and .then gives you the values if both resolved successfully. Here is an example:
Promise.all([
$.ajax({ url: 'test1.php' }),
$.ajax({ url: 'test2.php' })
])
.then(([res1, res2]) => {
// Both requests resolved
})
.catch(error => {
// Something went wrong
});
But I don't understand what does promise.race() is supposed to do exactly? In other word, what's the difference with not using it? Assume this:
$.ajax({
url: 'test1.php',
async: true,
success: function (data) {
// This request resolved
}
});
$.ajax({
url: 'test2.php',
async: true,
success: function (data) {
// This request resolved
}
});
See? I haven't used promise.race() and it behaves like promise.race(). Anyway, is there any simple and clean example to show me when exactly should I use promise.race() ?
As you see, the race() will return the promise instance which is firstly resolved or rejected:
var p1 = new Promise(function(resolve, reject) {
setTimeout(resolve, 500, 'one');
});
var p2 = new Promise(function(resolve, reject) {
setTimeout(resolve, 100, 'two');
});
Promise.race([p1, p2]).then(function(value) {
console.log(value); // "two"
// Both resolve, but p2 is faster
});
For a scenes to be used， maybe you want to limit the cost time of a request ：
var p = Promise.race([
fetch('/resource-that-may-take-a-while'),
new Promise(function (resolve, reject) {
setTimeout(() => reject(new Error('request timeout')), 5000)
})
])
p.then(response => console.log(response))
p.catch(error => console.log(error))
With the race() you just need to get the returned promise, you needn't care about which one of the promises in the race([]) firstly returned,
However, without the race, just like your example, you need to care about which one will firstly returned, and called the callback in the both success callback.
I've used it for request batching. We had to batch tens of thousands of records into batches for a long running execution. We could do it in parallel, but didn't want the number of pending requests to get out of hand.
Race lets us keep a fixed number of parallel promises running and add one to replace whenever one completes
const _ = require('lodash')
async function batchRequests(options) {
let query = { offset: 0, limit: options.limit };
do {
batch = await model.findAll(query);
query.offset += options.limit;
if (batch.length) {
const promise = doLongRequestForBatch(batch).then(() => {
// Once complete, pop this promise from our array
// so that we know we can add another batch in its place
_.remove(promises, p => p === promise);
});
promises.push(promise);
// Once we hit our concurrency limit, wait for at least one promise to
// resolve before continuing to batch off requests
if (promises.length >= options.concurrentBatches) {
await Promise.race(promises);
}
}
} while (batch.length);
// Wait for remaining batches to finish
return Promise.all(promises);
}
batchRequests({ limit: 100, concurrentBatches: 5 });
It's a piece to build a timeout system, where:
the request/computation may be canceled by another channel
it will still be used later, but we need an interaction now.
For an example of the second, one might show a spinner "instantly" while still defaulting to show real content if it comes in fast enough. Try running the below a few times - note at least some console message comes "instantly". This might normally be attached to perform operations on a UI.
The key to note is - the result of Promise.race is much less important than the side effects (though, this then is a code smell).
// 300 ms _feels_ "instant", and flickers are bad
function getUserInfo(user) {
return new Promise((resolve, reject) => {
// had it at 1500 to be more true-to-life, but 900 is better for testing
setTimeout(() => resolve("user data!"), Math.floor(900*Math.random()));
});
}
function showUserInfo(user) {
return getUserInfo().then(info => {
console.log("user info:", info);
return true;
});
}
function showSpinner() {
console.log("please wait...")
}
function timeout(delay, result) {
return new Promise(resolve => {
setTimeout(() => resolve(result), delay);
});
}
Promise.race([showUserInfo(), timeout(300)]).then(displayed => {
if (!displayed) showSpinner();
});
Inspiration credit to a comment by captainkovalsky.
An example of the first:
function timeout(delay) {
let cancel;
const wait = new Promise(resolve => {
const timer = setTimeout(() => resolve(false), delay);
cancel = () => {
clearTimeout(timer);
resolve(true);
};
});
wait.cancel = cancel;
return wait;
}
function doWork() {
const workFactor = Math.floor(600*Math.random());
const work = timeout(workFactor);
const result = work.then(canceled => {
if (canceled)
console.log('Work canceled');
else
console.log('Work done in', workFactor, 'ms');
return !canceled;
});
result.cancel = work.cancel;
return result;
}
function attemptWork() {
const work = doWork();
return Promise.race([work, timeout(300)])
.then(done => {
if (!done)
work.cancel();
return (done ? 'Work complete!' : 'I gave up');
});
}
attemptWork().then(console.log);
You can see from this one that the timeout's console.log is never executed when the timeout hits first. It should fail/succeed about half/half, for testing convenience.
Here's an easy example to understand the use of promise.race():
Imagine you need to fetch some data from a server and if the data takes too long to load (say 15 seconds) you want to show an error.
You would call promise.race() with two promises, the first being your ajax request and the second being a simple setTimeout(() => resolve("ERROR"), 15000)
Summary:
Promise.race is a JS built in function that accepts an iterable of Promises (e.g. Array) as an argument. This function then asynchronously returns a Promise as soon as one in of the Promises passed in the iterable is either resolved or rejected.
Example 1:
var promise1 = new Promise((resolve, reject) => {
setTimeout(() => resolve('Promise-one'), 500);
});
var promise2 = new Promise((resolve, reject) => {
setTimeout(() => resolve('Promise-two'), 100);
});
Promise.race([promise1, promise2]).then((value) => {
console.log(value);
// Both resolve, but promise2 is faster than promise 1
});
In this example first an array of Promises is passed in Promise.race. Both of the promises resolve but promise1 resolves faster. Therefore the promise is resolved with the value of promise1, which is the string 'Promise-one'.
Example 2:
const promise1 = new Promise((resolve, reject) => {
setTimeout(() => resolve('succes'), 2000);
});
const promise2 = new Promise((resolve, reject) => {
setTimeout(() => reject('err'), 1000);
});
Promise.race([promise1, promise2])
.then((value) => {
console.log(value);
}).catch((value) => {
console.log('error: ' + value);
});
In this second example the second promise rejects faster than the first promise can resolve. Therefore Promise.race will return a rejected promise with the value of 'err' which was the value that Promise2 rejected with.
The key point to understand is that Promice.race takes an iterable of Promises and returns a Promise based on the first resolved or rejected promise in that iterable (with the corresponding resolve() or reject() values).
Let's take an sample workaround of Promise.race like below.
const race = (promises) => {
return new Promise((resolve, reject) => {
return promises.forEach(f => f.then(resolve).catch(reject));
})
};
You can see race function executes all promises, but whomever finishes first will resolve/reject with wrapper Promise.
As far as I know, there are two options about promise:
promise.all()
promise.race()
Ok, I know what promise.all() does. It runs promises in parallel, and .then gives you the values if both resolved successfully. Here is an example:
Promise.all([
$.ajax({ url: 'test1.php' }),
$.ajax({ url: 'test2.php' })
])
.then(([res1, res2]) => {
// Both requests resolved
})
.catch(error => {
// Something went wrong
});
But I don't understand what does promise.race() is supposed to do exactly? In other word, what's the difference with not using it? Assume this:
$.ajax({
url: 'test1.php',
async: true,
success: function (data) {
// This request resolved
}
});
$.ajax({
url: 'test2.php',
async: true,
success: function (data) {
// This request resolved
}
});
See? I haven't used promise.race() and it behaves like promise.race(). Anyway, is there any simple and clean example to show me when exactly should I use promise.race() ?
As you see, the race() will return the promise instance which is firstly resolved or rejected:
var p1 = new Promise(function(resolve, reject) {
setTimeout(resolve, 500, 'one');
});
var p2 = new Promise(function(resolve, reject) {
setTimeout(resolve, 100, 'two');
});
Promise.race([p1, p2]).then(function(value) {
console.log(value); // "two"
// Both resolve, but p2 is faster
});
For a scenes to be used， maybe you want to limit the cost time of a request ：
var p = Promise.race([
fetch('/resource-that-may-take-a-while'),
new Promise(function (resolve, reject) {
setTimeout(() => reject(new Error('request timeout')), 5000)
})
])
p.then(response => console.log(response))
p.catch(error => console.log(error))
With the race() you just need to get the returned promise, you needn't care about which one of the promises in the race([]) firstly returned,
However, without the race, just like your example, you need to care about which one will firstly returned, and called the callback in the both success callback.
I've used it for request batching. We had to batch tens of thousands of records into batches for a long running execution. We could do it in parallel, but didn't want the number of pending requests to get out of hand.
Race lets us keep a fixed number of parallel promises running and add one to replace whenever one completes
const _ = require('lodash')
async function batchRequests(options) {
let query = { offset: 0, limit: options.limit };
do {
batch = await model.findAll(query);
query.offset += options.limit;
if (batch.length) {
const promise = doLongRequestForBatch(batch).then(() => {
// Once complete, pop this promise from our array
// so that we know we can add another batch in its place
_.remove(promises, p => p === promise);
});
promises.push(promise);
// Once we hit our concurrency limit, wait for at least one promise to
// resolve before continuing to batch off requests
if (promises.length >= options.concurrentBatches) {
await Promise.race(promises);
}
}
} while (batch.length);
// Wait for remaining batches to finish
return Promise.all(promises);
}
batchRequests({ limit: 100, concurrentBatches: 5 });
It's a piece to build a timeout system, where:
the request/computation may be canceled by another channel
it will still be used later, but we need an interaction now.
For an example of the second, one might show a spinner "instantly" while still defaulting to show real content if it comes in fast enough. Try running the below a few times - note at least some console message comes "instantly". This might normally be attached to perform operations on a UI.
The key to note is - the result of Promise.race is much less important than the side effects (though, this then is a code smell).
// 300 ms _feels_ "instant", and flickers are bad
function getUserInfo(user) {
return new Promise((resolve, reject) => {
// had it at 1500 to be more true-to-life, but 900 is better for testing
setTimeout(() => resolve("user data!"), Math.floor(900*Math.random()));
});
}
function showUserInfo(user) {
return getUserInfo().then(info => {
console.log("user info:", info);
return true;
});
}
function showSpinner() {
console.log("please wait...")
}
function timeout(delay, result) {
return new Promise(resolve => {
setTimeout(() => resolve(result), delay);
});
}
Promise.race([showUserInfo(), timeout(300)]).then(displayed => {
if (!displayed) showSpinner();
});
Inspiration credit to a comment by captainkovalsky.
An example of the first:
function timeout(delay) {
let cancel;
const wait = new Promise(resolve => {
const timer = setTimeout(() => resolve(false), delay);
cancel = () => {
clearTimeout(timer);
resolve(true);
};
});
wait.cancel = cancel;
return wait;
}
function doWork() {
const workFactor = Math.floor(600*Math.random());
const work = timeout(workFactor);
const result = work.then(canceled => {
if (canceled)
console.log('Work canceled');
else
console.log('Work done in', workFactor, 'ms');
return !canceled;
});
result.cancel = work.cancel;
return result;
}
function attemptWork() {
const work = doWork();
return Promise.race([work, timeout(300)])
.then(done => {
if (!done)
work.cancel();
return (done ? 'Work complete!' : 'I gave up');
});
}
attemptWork().then(console.log);
You can see from this one that the timeout's console.log is never executed when the timeout hits first. It should fail/succeed about half/half, for testing convenience.
Here's an easy example to understand the use of promise.race():
Imagine you need to fetch some data from a server and if the data takes too long to load (say 15 seconds) you want to show an error.
You would call promise.race() with two promises, the first being your ajax request and the second being a simple setTimeout(() => resolve("ERROR"), 15000)
Summary:
Promise.race is a JS built in function that accepts an iterable of Promises (e.g. Array) as an argument. This function then asynchronously returns a Promise as soon as one in of the Promises passed in the iterable is either resolved or rejected.
Example 1:
var promise1 = new Promise((resolve, reject) => {
setTimeout(() => resolve('Promise-one'), 500);
});
var promise2 = new Promise((resolve, reject) => {
setTimeout(() => resolve('Promise-two'), 100);
});
Promise.race([promise1, promise2]).then((value) => {
console.log(value);
// Both resolve, but promise2 is faster than promise 1
});
In this example first an array of Promises is passed in Promise.race. Both of the promises resolve but promise1 resolves faster. Therefore the promise is resolved with the value of promise1, which is the string 'Promise-one'.
Example 2:
const promise1 = new Promise((resolve, reject) => {
setTimeout(() => resolve('succes'), 2000);
});
const promise2 = new Promise((resolve, reject) => {
setTimeout(() => reject('err'), 1000);
});
Promise.race([promise1, promise2])
.then((value) => {
console.log(value);
}).catch((value) => {
console.log('error: ' + value);
});
In this second example the second promise rejects faster than the first promise can resolve. Therefore Promise.race will return a rejected promise with the value of 'err' which was the value that Promise2 rejected with.
The key point to understand is that Promice.race takes an iterable of Promises and returns a Promise based on the first resolved or rejected promise in that iterable (with the corresponding resolve() or reject() values).
Let's take an sample workaround of Promise.race like below.
const race = (promises) => {
return new Promise((resolve, reject) => {
return promises.forEach(f => f.then(resolve).catch(reject));
})
};
You can see race function executes all promises, but whomever finishes first will resolve/reject with wrapper Promise.
function timeout(delay) {
return new Promise((resolve, reject) => {
setTimeout(resolve, delay);
});
}
function printDots(delays) {
return delays.map((delay) => {
return timeout(delay).then(() => process.stdout.write('.'))
}).reduce((acc, prom) => acc.then(prom));
}
printDots([513, 3402, 1337, 4122]).then(() => process.stdout.write('DONE!'));
This prints .DONE!... but I expected that it would print ....DONE!
.then expects a function as it's arguments (onFullfilled, onRejected), any value that is not a function is totally ignored
However, prom in the reduce callback is a promise, so only the first promise will be waited for
simple change, marked below should fix things
function timeout(delay) {
return new Promise((resolve, reject) => {
setTimeout(resolve, delay);
});
}
function printDots(delays) {
return delays.map((delay) => {
return timeout(delay).then(() => process.stdout.write('.'))
}).reduce((acc, prom) => acc.then(() => prom));
// ^^^^^^
}
printDots([513, 3402, 1337, 4122]).then(() => process.stdout.write('DONE!'));
Note, however, that the promises will all be commenced at about the same time, no waiting for 0 to end before 1 starts etc
given this, an arguably better solution for printDots is to use Promise.all
function printDots(delays) {
return Promise.all(delays.map((delay) => timeout(delay).then(() => process.stdout.write('.'))));
}
As per comments, the promises need to run sequentially - that's as simple as only using reduce
function timeout(delay) {
return new Promise((resolve, reject) => {
setTimeout(resolve, delay);
});
}
function printDots(delays) {
return delays.reduce((acc, delay) => acc.then(() => timeout(delay).then(() => process.stdout.write('.'))), Promise.resolve());
}
printDots([513, 3402, 1337, 4122]).then(() => process.stdout.write('DONE!'));
In this case, you need to provide an initial promise (Promise.resolve) to reduce so that the first iteration is working with a promise like all subsequent ones are