I'm trying to understand how to properly manipulate properties via a controller. The following code executes six updates over four seconds. Updates two and three are not reflected in the view. Why is this, and what do I need to do to have updates of those types affect the view?
Html
<div ng-controller="Controller">
myValue: <span ng-bind="myValue"></span>
</div>
Javascript
var app = angular.module('myApp', []);
app.controller('Controller', function ($scope, $interval) {
$scope.myValue = "first";
console.log($scope.myValue);
setTimeout(function() {
$scope.myValue = "second"; // never updates
console.log($scope.myValue);
$scope.$emit("my-event", "third"); // never updates
console.log($scope.myValue);
$interval(function() {
$scope.$emit('my-event', "fourth");
}, 1000, 1);
}, 1000);
$interval(function() {
$scope.myValue = "fifth";
console.log($scope.myValue);
$interval(function() {
$scope.$emit("my-event", "sixth");
}, 1000, 1);
}, 3000, 1);
$scope.$on('my-event', function (event, arg) {
$scope.myValue = arg;
console.log(arg);
});
});
JSFiddle
Use $timeout instead of setTimeout to opt-in to the digest cycle. second won't show since the turn of the digest cycle overrides the value of myValue.
Updated fiddle: https://jsfiddle.net/d9gbpddy/4/
You can try {{myValue}} instead of a <span> element
So I obviously wasn't clear enough in the original question, as the upvoted answer (correctly) suggests using $timeout rather than setTimeout, however the original intent was to understand why the updates were not being reflected in the view, and what could be done to have these types of updates (that originate outside angular) affect the view as was intended.
Read the Scope guide
So whilst I chose to skip the Scopes section of the developer guide because it looked to be the most boring, it was probably the most important, and it clearly points out some items imperative to understanding how angular binds data, notably the Scope Life Cycle which notes;
When the browser calls into JavaScript the code executes outside the
Angular execution context, which means that Angular is unaware of
model modifications. To properly process model modifications the
execution has to enter the Angular execution context using the $apply
method. Only model modifications which execute inside the $apply
method will be properly accounted for by Angular.
There's an excellent answer here that further explains this concept. The first setence aptly reiterates the importance of understanding scope:
You need to be aware about how Angular works in order to understand
it.
Don't just call $scope.$apply
So you start adding calls to $scope.$apply around the place to cater for these things that originate outside angular, but then eventually you start getting:
Error: $digest already in progress
Which means you can't call $scope.$apply whilst $digest is executing. After which you may think, well how can I conditionally call $scope.$apply based on whether the $digest is currently running. But, you don't need to do that...
Just use $timeout
Hah, like the upvoted answer, I know, but based on a different thought process I think. See this answer. $timeout is not just being used in place of setTimeout, but rather is being used (without a delay) to wrap any model updates that are called from outside the Scope Life Cycle, and doing so ensures no conflict with any currently processing $digest.
Wrapping up
So, in the original code snippet, the second and third updates are not reflected in the view because they are performed outside the Angular execution context. The fact that third update doesn't affect the model also means that calling events outside the execution context doesn't get you into the execution context either.
The fourth update is already wrapped inside $interval, which itself causes the updates that code to be run on the next digest. Therefore, updating the code to show an example of an event outside the angular execution context that causes its updates to be shown in the view is as follows:
setTimeout(function() {
$timeout(function({ // start wrap
$scope.myValue = "second"; // now this updates!
console.log($scope.myValue);
$scope.$emit("my-event", "third"); // now this updates!
})); // end wrap
console.log($scope.myValue);
$interval(function() {
$scope.$emit('my-event', "fourth");
}, 1000, 1);
}, 1000);
Related
I have a controller where I need to load content using ajax. While it's loading, I'd like a spinner to appear in the interim. The code looks something like the below:
<i class="fa fa-2x fa-spin fa-spinner" ng-show="isLoadingContent"></i>
And the corresponding js:
$scope.isLoadingContent = true;
$q.all(promises).then(function (values) {
$scope.isLoadingContent = false;
// more code - display returned data
However, the UI the spinner does not appear where/when I expect it to appear when I step through the code.
$scope.isLoadingContent = true;
debugger; // the spinner does not appear on the UI
$q.all(promises).then(function (values) {
debugger; // the spinner finally does appear in the UI at this point
$scope.isLoadingContent = false;
// more code - display returned data
I have tried stepping through the code but came up short as to what's going on --
and I am sure I am misunderstanding the sequence of events happening in the Event Loop and where the angular-cycle plays it's role in all of this.
Is someone able to provide an explanation as to why the spinner is set to appear within the promise's method rather than where I set $scope.isLoadingContent? Is it not actually getting set but rather getting queue'd up in the event-loop's message-queue?
------------ EDIT ------------
I believe I came across an explanation as to what's going on. Thanks in large part to, #jcford and #istrupin.
So a little tidbit missing in the original post, the event firing the promise calls and the spinner update was actually based around a $scope.$on("some-name", function(){...}) event - effectively a click-event that is triggered outside of my current controller's scope. I believe this means the $digest cycle doesn't work as it typically does because of where the event-origination is fired off. So any update in the $on function doesn't call $apply/$digest like it normally does, meaning I have to specifically make that $digest call.
Oddly enough, I realize now that within the $q.all(), it must call $apply since, when debugging, I saw the DOM changes that I had expected. Fwiw.
tl;dr - call $digest.
A combination of both answers will do the trick here. Use
$scope.$evalAsync()
This will combine scope apply with timeout in a nice way. The code within the $evalAsync will either be included in the current digest OR wait until the current digest is over and start a new digest with your changes.
i.e.
$q.all(promises).then(function (values) {
$scope.$evalAsync($scope.isLoadingContent = false);
});
Try adding $scope.$apply() after assigning $scope.isLoadingContent = true to force the digest. There might be something in the rest of your code keeping it from applying immediately.
As pointed out in a number of comments, this is absolutely a hack and is not the best way to go about solving the issue. That said, if this does work, you at least know that your binding is set up correctly, which will allow you to debug further. Since you mentioned it did, the next step would then be to see what's screwing up the normal digest cycle -- for example triggering outside of angular, as suggested by user JC Ford.
I usually use isContentLoaded (as oposite to isLoading). I leave it undefined at first so ng-show="!isContentLoaded" is guaranteed to show up at first template iteration.
When all is loaded i set isContentLoaded to true.
To debug your template you need to use $timeout
$timeout(function () { debugger; })
That will stop the code execution right after first digest cycle with all the $scope variable values reflected in the DOM.
I've been looking into the caveats of the AngularJS Digest cycle and I would like to better understand where the separation is between using it properly and improperly.
For example, if I have an AngularJS code that looks like this:
var myApp = angular.module("testApp", []);
myApp.controller("testController", ["$scope", "$timeout", function($scope, $timeout){
setTimeout(function(){
$scope.username = "Test User name";
}, 3000);
$timeout(function(){
$scope.username = "AngularJS User name";
}, 3000);
}]);
Why is setTimeout not being used as part of the Digest Cycle, whereas $timeout is, and how can I fix this to work?
Please keep in mind, I am looking not only for a code solution but for an explanation of why this occurs. As good as a code solution may come, it will not explain itself.
$timeout is an angularized version of setTimeout(), i.e. it is coded in such a way that it triggers a digest cycle. setTimeout() is a plain Javascript function that knows nothing about Angular or a digest cycle. Since setTimeout() is not a simple JS object, Angular cannot $watch it.
So the whole point of having functionality like $timeout is that they are angular-friendly versions of some Javascript functionality.
$timeout() and setTimeout() are not the same, $timeout is angularised.
It uses promise ($q service) internally, which would resolve after every digest cycle, automatically. Whereas setTimeout(), is just a trick with registering your callback function in the queue.
If you want setTimeout() to be part of digest loop, call it within the $scope.$apply():
setTimeout(function(){
$scope.$apply(function(){
$scope.username = "Test User name";
});
}, 3000));
A more generic explanation is that setTimeout does not work inside of angular because it puts its callback on the event loop, which angular does not watch. The same situation would happen if you were to create an XMLHttpRequest directly instead of $http.
Angular has made their own abstraction of these utilities/objects so that when they finish, the digest cycle will pick up any changes.
I am reading AngularJS in Action by Lukas Ruebbelke to clear the concept of dirty checking as to how AngularJS works at a molecular level.
The author puts forward,
It is during the digest cycle that all watch expressions for a scope object
are evaluated. When a watch expression detects that a $scope property has
changed, then a listener function is fired.
Ocassionally a property is changed without AngularJS knowing about it. You
can manually kickstart a digest cycle vis $apply.
So, my question is what are those situations in a real web application when I need to kick off this digest cycle manually. And are those situations often seen? Kindly suggest.
This will come up any time an asynchronous callback returns from a non-angular library. e.g.
setTimeout(function() {
$scope.myVar = 1;
//Angular doesn't know when setTimeout finishes
//so you have to manually kick off a digest cycle.
$scope.$apply();
});
Angular has the $timeout service which takes care of starting a digest cycle for you but if you are using some third party library that takes a callback and doesn't have an angular wrapper then you will have to do this.
These situations can happen when using 3rd party libraries which provide some kind of data for example.
Say you use library-X which fires an event when something happened and new data is available, which you would like to render with AngularJS.
In these causes AngularJS does not know that data in the scope changed if you just directly set the variables.
That is why you should only modify scope variables inside the $apply function:
function MyController($scope) {
$scope.load = function() {
$scope.message = 'Loading...';
setTimeout(function() {
$scope.$apply(function () {
$scope.message = 'Finished loading!';
});
}, 2000);
}
}
It is also advised to use $scope.$apply(function () { /* update code */ }) instead of the single $scope.$apply() call, since it will properly catch errors and run the diggest regardless of any errors.
I'm currently polling the server to check for new data, and then update the model in an AngularJS app accordingly. He're roughly what I'm doing:
setInterval(function () {
$http.get('data.json').then(function (result) {
if (result.data.length > 0) {
// if data, update model here
} else {
// nothing has changed, but AngularJS will still start the digest cycle
}
});
}, 5000);
This works fine, but most of the requests will not result in any new data or data changes, but the $http service doesn't really know/care and will still trigger a digest cycle. I feel this is unnecessary (since the digest cycle is one of the heaviest operations in the app). Is there any way to still be able to use $http but somehow skip the digest if nothing has changed?
One solution would be to not use $http but jQuery instead, and then call $apply to let Angular know that the model has changed:
setInterval(function () {
$.get('data.json', function (dataList) {
if (dataList.length > 0) {
// if data, update model
$scope.value = dataList[0].value + ' ' + new Date();
// notify angular manually that the model has changed.
$rootScope.$apply();
}
});
}, 5000);
While this seems to work, I'm not sure it's a good idea. I would still like to use pure Angular if possible.
Anyone got any suggestions for improvements to the approach above or a more elegant solution entirely?
P.S. The reason I'm using setInterval instead of $timeout is because $timeout would also trigger a digest cycle which would be unnecessary in this case and only add to the "problem".
Solution provided by AngularJS #doc
AngularJS recommends to use a PERF trick that would bundle up a few $http responses in one $digest via $httpProvider. This again, is not fixing the problem, it's just a sedative :)
$httpProvider.useApplyAsync(true)
Saving the $$watchers solution - risky and not scalable
Firstly, the accepted solution is not scalable - there's no way you're going to do that $watchers trick on a 100K lines of JS code project - it's out of the question.
Secondly, even if the project is small, it's quite risky! What happens for instance if another ajax call arrives that actually needs those watchers?
Another (feasible) risky solution
The only alternative to achieve this without modifying AngularJS code would be to set the $rootScope.$$phase to true or '$digest', make the $http call, and set back the $rootScope.$$phase to null.
$rootScope.$$phase = true;
$http({...})
.then(successcb, failurecb)
.finally(function () {
$rootScope.$$phase = null;
});
Risks:
1) other ajax calls might try to do the same thing --> they need to be synchronized via a wrapping ajax service (over $http)
2) user can trigger UI actions in between, actions that will change the $$phase to null and when the ajax call will come back, and still trigger the $digest
The solution popped after scanning AngularJS source code - here's the line that saves the situation: https://github.com/angular/angular.js/blob/e5e0884eaf2a37e4588d917e008e45f5b3ed4479/src/ng/http.js#L1272
The ideal solution
Because this is a problem that everyone is facing with AngularJS, I think it needs to be addressed systematically. The answers above are not fixing the problem, are only trying to avoid it.
So we should create a AngularJS pull request that would allow us to specify via $httpProvider a config that would not trigger a digest for a specific $http request. Hopefully they agree that this needs to be addressed somehow.
Web sockets would seem to be the most elegant solution here. That way you don't need to poll the server. The server can tell your app when data or anything has changed.
You can do it by this trick :
var watchers;
scope.$on('suspend', function () {
watchers = scope.$$watchers;
scope.$$watchers = [];
});
scope.$on('resume', function () {
scope.$$watchers = watchers;
watchers = null;
});
With this you will remove your scope or reinsert it on the $digest cycle.
You have to manage events to do that of course.
Refer to this post :
Remove and restore Scope from digest cycles
Hope it helps !
Why checks of any expression in directives like ng-show (or other) are duplicate? I made simple jsfiddle example http://jsfiddle.net/fA5YX/. See in browser console.
<div ng-app ng-controller="ctrl" ng-show="test()">shown</div>
<script>
function ctrl($scope) {
$scope.test = function() {
console.log('check');
return true;
}
}
</script>
How make it stop? I need just one check.
Perhaps linked to Controller function getting called twice using ng-show - to quote:
At each digest cycle, for every watch, AngularJS evaluates the
associated expression to see if there's any change and if there is,
invoking the listener (in the case of ng-show/ng-hide, the listener
will show or hide the element based on the value returned by ready()).
Every watcher is run at the digest cycle. The digest cycle is repeated until none of the results has changed value (or when angular guards against infinite loop). This is why your watchers are run multiple times. Bottom line is, don't rely on watchers being fired only once because this goes against the basic groundrules of why angular works.
If you post details on what you try to achieve we might be able to guide you to a pattern that actually works in the angular philosophy.