Essentially I want to have a script execute when the contents of a DIV change. Since the scripts are separate (content script in the Chrome extension & webpage script), I need a way simply observe changes in DOM state. I could set up polling but that seems sloppy.
For a long time, DOM3 mutation events were the best available solution, but they have been deprecated for performance reasons. DOM4 Mutation Observers are the replacement for deprecated DOM3 mutation events. They are currently implemented in modern browsers as MutationObserver (or as the vendor-prefixed WebKitMutationObserver in old versions of Chrome):
MutationObserver = window.MutationObserver || window.WebKitMutationObserver;
var observer = new MutationObserver(function(mutations, observer) {
// fired when a mutation occurs
console.log(mutations, observer);
// ...
});
// define what element should be observed by the observer
// and what types of mutations trigger the callback
observer.observe(document, {
subtree: true,
attributes: true
//...
});
This example listens for DOM changes on document and its entire subtree, and it will fire on changes to element attributes as well as structural changes. The draft spec has a full list of valid mutation listener properties:
childList
Set to true if mutations to target's children are to be observed.
attributes
Set to true if mutations to target's attributes are to be observed.
characterData
Set to true if mutations to target's data are to be observed.
subtree
Set to true if mutations to not just target, but also target's descendants are to be observed.
attributeOldValue
Set to true if attributes is set to true and target's attribute value before the mutation needs to be recorded.
characterDataOldValue
Set to true if characterData is set to true and target's data before the mutation needs to be recorded.
attributeFilter
Set to a list of attribute local names (without namespace) if not all attribute mutations need to be observed.
(This list is current as of April 2014; you may check the specification for any changes.)
Edit
This answer is now deprecated. See the answer by apsillers.
Since this is for a Chrome extension, you might as well use the standard DOM event - DOMSubtreeModified. See the support for this event across browsers. It has been supported in Chrome since 1.0.
$("#someDiv").bind("DOMSubtreeModified", function() {
alert("tree changed");
});
See a working example here.
Many sites use AJAX/XHR/fetch to add, show, modify content dynamically and window.history API instead of in-site navigation so current URL is changed programmatically. Such sites are called SPA, short for Single Page Application.
Usual JS methods of detecting page changes
MutationObserver (docs) to literally detect DOM changes.
Info/examples:
How to change the HTML content as it's loading on the page
Performance of MutationObserver to detect nodes in entire DOM.
Lightweight observer to react to a change only if URL also changed:
let lastUrl = location.href;
new MutationObserver(() => {
const url = location.href;
if (url !== lastUrl) {
lastUrl = url;
onUrlChange();
}
}).observe(document, {subtree: true, childList: true});
function onUrlChange() {
console.log('URL changed!', location.href);
}
Event listener for sites that signal content change by sending a DOM event:
pjax:end on document used by many pjax-based sites e.g. GitHub,
see How to run jQuery before and after a pjax load?
message on window used by e.g. Google search in Chrome browser,
see Chrome extension detect Google search refresh
yt-navigate-finish used by Youtube,
see How to detect page navigation on YouTube and modify its appearance seamlessly?
Periodic checking of DOM via setInterval:
Obviously this will work only in cases when you wait for a specific element identified by its id/selector to appear, and it won't let you universally detect new dynamically added content unless you invent some kind of fingerprinting the existing contents.
Cloaking History API:
let _pushState = History.prototype.pushState;
History.prototype.pushState = function (state, title, url) {
_pushState.call(this, state, title, url);
console.log('URL changed', url)
};
Listening to hashchange, popstate events:
window.addEventListener('hashchange', e => {
console.log('URL hash changed', e);
doSomething();
});
window.addEventListener('popstate', e => {
console.log('State changed', e);
doSomething();
});
P.S. All these methods can be used in a WebExtension's content script. It's because the case we're looking at is where the URL was changed via history.pushState or replaceState so the page itself remained the same with the same content script environment.
Another approach depending on how you are changing the div.
If you are using JQuery to change a div's contents with its html() method, you can extend that method and call a registration function each time you put html into a div.
(function( $, oldHtmlMethod ){
// Override the core html method in the jQuery object.
$.fn.html = function(){
// Execute the original HTML method using the
// augmented arguments collection.
var results = oldHtmlMethod.apply( this, arguments );
com.invisibility.elements.findAndRegisterElements(this);
return results;
};
})( jQuery, jQuery.fn.html );
We just intercept the calls to html(), call a registration function with this, which in the context refers to the target element getting new content, then we pass on the call to the original jquery.html() function. Remember to return the results of the original html() method, because JQuery expects it for method chaining.
For more info on method overriding and extension, check out http://www.bennadel.com/blog/2009-Using-Self-Executing-Function-Arguments-To-Override-Core-jQuery-Methods.htm, which is where I cribbed the closure function. Also check out the plugins tutorial at JQuery's site.
In addition to the "raw" tools provided by MutationObserver API, there exist "convenience" libraries to work with DOM mutations.
Consider: MutationObserver represents each DOM change in terms of subtrees. So if you're, for instance, waiting for a certain element to be inserted, it may be deep inside the children of mutations.mutation[i].addedNodes[j].
Another problem is when your own code, in reaction to mutations, changes DOM - you often want to filter it out.
A good convenience library that solves such problems is mutation-summary (disclaimer: I'm not the author, just a satisfied user), which enables you to specify queries of what you're interested in, and get exactly that.
Basic usage example from the docs:
var observer = new MutationSummary({
callback: updateWidgets,
queries: [{
element: '[data-widget]'
}]
});
function updateWidgets(summaries) {
var widgetSummary = summaries[0];
widgetSummary.added.forEach(buildNewWidget);
widgetSummary.removed.forEach(cleanupExistingWidget);
}
Related
I'd like to fire an event when an element is added to the document. I've read the JQuery documentation for on() and the list of events but none of the events seem to concern element creation.
I must monitor the DOM as I do not control when the element is added to the document (as my Javascript is a Chrome Extension content script)
I know this is an old question, that already has an answer, but since things have changed, I thought I'd add an updated answer for people landing on this page looking for an answer.
The DOM Mutation Events have been deprecated. According to MDN (regarding DOM Mutation Events):
Deprecated
This feature has been removed from the Web. Though some browsers may still support it, it is in the process of being dropped. Do not use it in old or new projects. Pages or Web apps using it may break at any time.
One should use the new MutationObserver API, which is also more efficient.
(The mutation-summary library now provides a useful inteface to this new API.)
Example usage:
// Create an observer instance.
var observer = new MutationObserver(function (mutations) {
mutations.forEach(function (mutation) {
console.log(mutation.type);
});
});
// Config info for the observer.
var config = {
childList: true,
subtree: true
};
// Observe the body (and its descendants) for `childList` changes.
observer.observe(document.body, config);
...
// Stop the observer, when it is not required any more.
observer.disconnect();
As mentioned, I am not creating my own elements, so firing off an event when I create the element isn't an option.
The best solution to this is the Mutation Observer API, for which the Mutation Summary provides a friendly interface.
For the simplest option, you might want to examine LiveQuery which is effectively the 'DOM listener' that you're after. It should be used with caution however, as it has the potential to be quite heavyweight, performance-wise.
If you're preferring to 'roll your own' - with .on() it should work for all current and future elements - but the added elements would need to match the selector. For example, if you wire an event up to all classes of .myClass and you then injected a new element of the same class to the DOM, the event should fire. Effectively, the .on() API rolls-up bind/live/delegate from prior versions of jQuery, the latter two of which work against current and future DOM elements.
As a complement of #SpaceBison's answer, you can create your own events when you create these elements. For example:
function create_element() {
// Create an element
$( 'body' ).append( "<p>Testing..</p>" )
// Trigger
$( 'body' ).trigger( 'elementCreated' );
}
function monitor_elements() {
$("body").on("elementCreated", function(event){
alert('One more');
});
}
$(document).ready(function(){
monitor_elements();
for (var i=0; i < 3; i++) {
create_element();
}
});
Live example: http://jsfiddle.net/9NsAh/
But of course, it's only usefull when you create your own elements.
Essentially I want to have a script execute when the contents of a DIV change. Since the scripts are separate (content script in the Chrome extension & webpage script), I need a way simply observe changes in DOM state. I could set up polling but that seems sloppy.
For a long time, DOM3 mutation events were the best available solution, but they have been deprecated for performance reasons. DOM4 Mutation Observers are the replacement for deprecated DOM3 mutation events. They are currently implemented in modern browsers as MutationObserver (or as the vendor-prefixed WebKitMutationObserver in old versions of Chrome):
MutationObserver = window.MutationObserver || window.WebKitMutationObserver;
var observer = new MutationObserver(function(mutations, observer) {
// fired when a mutation occurs
console.log(mutations, observer);
// ...
});
// define what element should be observed by the observer
// and what types of mutations trigger the callback
observer.observe(document, {
subtree: true,
attributes: true
//...
});
This example listens for DOM changes on document and its entire subtree, and it will fire on changes to element attributes as well as structural changes. The draft spec has a full list of valid mutation listener properties:
childList
Set to true if mutations to target's children are to be observed.
attributes
Set to true if mutations to target's attributes are to be observed.
characterData
Set to true if mutations to target's data are to be observed.
subtree
Set to true if mutations to not just target, but also target's descendants are to be observed.
attributeOldValue
Set to true if attributes is set to true and target's attribute value before the mutation needs to be recorded.
characterDataOldValue
Set to true if characterData is set to true and target's data before the mutation needs to be recorded.
attributeFilter
Set to a list of attribute local names (without namespace) if not all attribute mutations need to be observed.
(This list is current as of April 2014; you may check the specification for any changes.)
Edit
This answer is now deprecated. See the answer by apsillers.
Since this is for a Chrome extension, you might as well use the standard DOM event - DOMSubtreeModified. See the support for this event across browsers. It has been supported in Chrome since 1.0.
$("#someDiv").bind("DOMSubtreeModified", function() {
alert("tree changed");
});
See a working example here.
Many sites use AJAX/XHR/fetch to add, show, modify content dynamically and window.history API instead of in-site navigation so current URL is changed programmatically. Such sites are called SPA, short for Single Page Application.
Usual JS methods of detecting page changes
MutationObserver (docs) to literally detect DOM changes.
Info/examples:
How to change the HTML content as it's loading on the page
Performance of MutationObserver to detect nodes in entire DOM.
Lightweight observer to react to a change only if URL also changed:
let lastUrl = location.href;
new MutationObserver(() => {
const url = location.href;
if (url !== lastUrl) {
lastUrl = url;
onUrlChange();
}
}).observe(document, {subtree: true, childList: true});
function onUrlChange() {
console.log('URL changed!', location.href);
}
Event listener for sites that signal content change by sending a DOM event:
pjax:end on document used by many pjax-based sites e.g. GitHub,
see How to run jQuery before and after a pjax load?
message on window used by e.g. Google search in Chrome browser,
see Chrome extension detect Google search refresh
yt-navigate-finish used by Youtube,
see How to detect page navigation on YouTube and modify its appearance seamlessly?
Periodic checking of DOM via setInterval:
Obviously this will work only in cases when you wait for a specific element identified by its id/selector to appear, and it won't let you universally detect new dynamically added content unless you invent some kind of fingerprinting the existing contents.
Cloaking History API:
let _pushState = History.prototype.pushState;
History.prototype.pushState = function (state, title, url) {
_pushState.call(this, state, title, url);
console.log('URL changed', url)
};
Listening to hashchange, popstate events:
window.addEventListener('hashchange', e => {
console.log('URL hash changed', e);
doSomething();
});
window.addEventListener('popstate', e => {
console.log('State changed', e);
doSomething();
});
P.S. All these methods can be used in a WebExtension's content script. It's because the case we're looking at is where the URL was changed via history.pushState or replaceState so the page itself remained the same with the same content script environment.
Another approach depending on how you are changing the div.
If you are using JQuery to change a div's contents with its html() method, you can extend that method and call a registration function each time you put html into a div.
(function( $, oldHtmlMethod ){
// Override the core html method in the jQuery object.
$.fn.html = function(){
// Execute the original HTML method using the
// augmented arguments collection.
var results = oldHtmlMethod.apply( this, arguments );
com.invisibility.elements.findAndRegisterElements(this);
return results;
};
})( jQuery, jQuery.fn.html );
We just intercept the calls to html(), call a registration function with this, which in the context refers to the target element getting new content, then we pass on the call to the original jquery.html() function. Remember to return the results of the original html() method, because JQuery expects it for method chaining.
For more info on method overriding and extension, check out http://www.bennadel.com/blog/2009-Using-Self-Executing-Function-Arguments-To-Override-Core-jQuery-Methods.htm, which is where I cribbed the closure function. Also check out the plugins tutorial at JQuery's site.
In addition to the "raw" tools provided by MutationObserver API, there exist "convenience" libraries to work with DOM mutations.
Consider: MutationObserver represents each DOM change in terms of subtrees. So if you're, for instance, waiting for a certain element to be inserted, it may be deep inside the children of mutations.mutation[i].addedNodes[j].
Another problem is when your own code, in reaction to mutations, changes DOM - you often want to filter it out.
A good convenience library that solves such problems is mutation-summary (disclaimer: I'm not the author, just a satisfied user), which enables you to specify queries of what you're interested in, and get exactly that.
Basic usage example from the docs:
var observer = new MutationSummary({
callback: updateWidgets,
queries: [{
element: '[data-widget]'
}]
});
function updateWidgets(summaries) {
var widgetSummary = summaries[0];
widgetSummary.added.forEach(buildNewWidget);
widgetSummary.removed.forEach(cleanupExistingWidget);
}
Essentially I want to have a script execute when the contents of a DIV change. Since the scripts are separate (content script in the Chrome extension & webpage script), I need a way simply observe changes in DOM state. I could set up polling but that seems sloppy.
For a long time, DOM3 mutation events were the best available solution, but they have been deprecated for performance reasons. DOM4 Mutation Observers are the replacement for deprecated DOM3 mutation events. They are currently implemented in modern browsers as MutationObserver (or as the vendor-prefixed WebKitMutationObserver in old versions of Chrome):
MutationObserver = window.MutationObserver || window.WebKitMutationObserver;
var observer = new MutationObserver(function(mutations, observer) {
// fired when a mutation occurs
console.log(mutations, observer);
// ...
});
// define what element should be observed by the observer
// and what types of mutations trigger the callback
observer.observe(document, {
subtree: true,
attributes: true
//...
});
This example listens for DOM changes on document and its entire subtree, and it will fire on changes to element attributes as well as structural changes. The draft spec has a full list of valid mutation listener properties:
childList
Set to true if mutations to target's children are to be observed.
attributes
Set to true if mutations to target's attributes are to be observed.
characterData
Set to true if mutations to target's data are to be observed.
subtree
Set to true if mutations to not just target, but also target's descendants are to be observed.
attributeOldValue
Set to true if attributes is set to true and target's attribute value before the mutation needs to be recorded.
characterDataOldValue
Set to true if characterData is set to true and target's data before the mutation needs to be recorded.
attributeFilter
Set to a list of attribute local names (without namespace) if not all attribute mutations need to be observed.
(This list is current as of April 2014; you may check the specification for any changes.)
Edit
This answer is now deprecated. See the answer by apsillers.
Since this is for a Chrome extension, you might as well use the standard DOM event - DOMSubtreeModified. See the support for this event across browsers. It has been supported in Chrome since 1.0.
$("#someDiv").bind("DOMSubtreeModified", function() {
alert("tree changed");
});
See a working example here.
Many sites use AJAX/XHR/fetch to add, show, modify content dynamically and window.history API instead of in-site navigation so current URL is changed programmatically. Such sites are called SPA, short for Single Page Application.
Usual JS methods of detecting page changes
MutationObserver (docs) to literally detect DOM changes.
Info/examples:
How to change the HTML content as it's loading on the page
Performance of MutationObserver to detect nodes in entire DOM.
Lightweight observer to react to a change only if URL also changed:
let lastUrl = location.href;
new MutationObserver(() => {
const url = location.href;
if (url !== lastUrl) {
lastUrl = url;
onUrlChange();
}
}).observe(document, {subtree: true, childList: true});
function onUrlChange() {
console.log('URL changed!', location.href);
}
Event listener for sites that signal content change by sending a DOM event:
pjax:end on document used by many pjax-based sites e.g. GitHub,
see How to run jQuery before and after a pjax load?
message on window used by e.g. Google search in Chrome browser,
see Chrome extension detect Google search refresh
yt-navigate-finish used by Youtube,
see How to detect page navigation on YouTube and modify its appearance seamlessly?
Periodic checking of DOM via setInterval:
Obviously this will work only in cases when you wait for a specific element identified by its id/selector to appear, and it won't let you universally detect new dynamically added content unless you invent some kind of fingerprinting the existing contents.
Cloaking History API:
let _pushState = History.prototype.pushState;
History.prototype.pushState = function (state, title, url) {
_pushState.call(this, state, title, url);
console.log('URL changed', url)
};
Listening to hashchange, popstate events:
window.addEventListener('hashchange', e => {
console.log('URL hash changed', e);
doSomething();
});
window.addEventListener('popstate', e => {
console.log('State changed', e);
doSomething();
});
P.S. All these methods can be used in a WebExtension's content script. It's because the case we're looking at is where the URL was changed via history.pushState or replaceState so the page itself remained the same with the same content script environment.
Another approach depending on how you are changing the div.
If you are using JQuery to change a div's contents with its html() method, you can extend that method and call a registration function each time you put html into a div.
(function( $, oldHtmlMethod ){
// Override the core html method in the jQuery object.
$.fn.html = function(){
// Execute the original HTML method using the
// augmented arguments collection.
var results = oldHtmlMethod.apply( this, arguments );
com.invisibility.elements.findAndRegisterElements(this);
return results;
};
})( jQuery, jQuery.fn.html );
We just intercept the calls to html(), call a registration function with this, which in the context refers to the target element getting new content, then we pass on the call to the original jquery.html() function. Remember to return the results of the original html() method, because JQuery expects it for method chaining.
For more info on method overriding and extension, check out http://www.bennadel.com/blog/2009-Using-Self-Executing-Function-Arguments-To-Override-Core-jQuery-Methods.htm, which is where I cribbed the closure function. Also check out the plugins tutorial at JQuery's site.
In addition to the "raw" tools provided by MutationObserver API, there exist "convenience" libraries to work with DOM mutations.
Consider: MutationObserver represents each DOM change in terms of subtrees. So if you're, for instance, waiting for a certain element to be inserted, it may be deep inside the children of mutations.mutation[i].addedNodes[j].
Another problem is when your own code, in reaction to mutations, changes DOM - you often want to filter it out.
A good convenience library that solves such problems is mutation-summary (disclaimer: I'm not the author, just a satisfied user), which enables you to specify queries of what you're interested in, and get exactly that.
Basic usage example from the docs:
var observer = new MutationSummary({
callback: updateWidgets,
queries: [{
element: '[data-widget]'
}]
});
function updateWidgets(summaries) {
var widgetSummary = summaries[0];
widgetSummary.added.forEach(buildNewWidget);
widgetSummary.removed.forEach(cleanupExistingWidget);
}
Essentially I want to have a script execute when the contents of a DIV change. Since the scripts are separate (content script in the Chrome extension & webpage script), I need a way simply observe changes in DOM state. I could set up polling but that seems sloppy.
For a long time, DOM3 mutation events were the best available solution, but they have been deprecated for performance reasons. DOM4 Mutation Observers are the replacement for deprecated DOM3 mutation events. They are currently implemented in modern browsers as MutationObserver (or as the vendor-prefixed WebKitMutationObserver in old versions of Chrome):
MutationObserver = window.MutationObserver || window.WebKitMutationObserver;
var observer = new MutationObserver(function(mutations, observer) {
// fired when a mutation occurs
console.log(mutations, observer);
// ...
});
// define what element should be observed by the observer
// and what types of mutations trigger the callback
observer.observe(document, {
subtree: true,
attributes: true
//...
});
This example listens for DOM changes on document and its entire subtree, and it will fire on changes to element attributes as well as structural changes. The draft spec has a full list of valid mutation listener properties:
childList
Set to true if mutations to target's children are to be observed.
attributes
Set to true if mutations to target's attributes are to be observed.
characterData
Set to true if mutations to target's data are to be observed.
subtree
Set to true if mutations to not just target, but also target's descendants are to be observed.
attributeOldValue
Set to true if attributes is set to true and target's attribute value before the mutation needs to be recorded.
characterDataOldValue
Set to true if characterData is set to true and target's data before the mutation needs to be recorded.
attributeFilter
Set to a list of attribute local names (without namespace) if not all attribute mutations need to be observed.
(This list is current as of April 2014; you may check the specification for any changes.)
Edit
This answer is now deprecated. See the answer by apsillers.
Since this is for a Chrome extension, you might as well use the standard DOM event - DOMSubtreeModified. See the support for this event across browsers. It has been supported in Chrome since 1.0.
$("#someDiv").bind("DOMSubtreeModified", function() {
alert("tree changed");
});
See a working example here.
Many sites use AJAX/XHR/fetch to add, show, modify content dynamically and window.history API instead of in-site navigation so current URL is changed programmatically. Such sites are called SPA, short for Single Page Application.
Usual JS methods of detecting page changes
MutationObserver (docs) to literally detect DOM changes.
Info/examples:
How to change the HTML content as it's loading on the page
Performance of MutationObserver to detect nodes in entire DOM.
Lightweight observer to react to a change only if URL also changed:
let lastUrl = location.href;
new MutationObserver(() => {
const url = location.href;
if (url !== lastUrl) {
lastUrl = url;
onUrlChange();
}
}).observe(document, {subtree: true, childList: true});
function onUrlChange() {
console.log('URL changed!', location.href);
}
Event listener for sites that signal content change by sending a DOM event:
pjax:end on document used by many pjax-based sites e.g. GitHub,
see How to run jQuery before and after a pjax load?
message on window used by e.g. Google search in Chrome browser,
see Chrome extension detect Google search refresh
yt-navigate-finish used by Youtube,
see How to detect page navigation on YouTube and modify its appearance seamlessly?
Periodic checking of DOM via setInterval:
Obviously this will work only in cases when you wait for a specific element identified by its id/selector to appear, and it won't let you universally detect new dynamically added content unless you invent some kind of fingerprinting the existing contents.
Cloaking History API:
let _pushState = History.prototype.pushState;
History.prototype.pushState = function (state, title, url) {
_pushState.call(this, state, title, url);
console.log('URL changed', url)
};
Listening to hashchange, popstate events:
window.addEventListener('hashchange', e => {
console.log('URL hash changed', e);
doSomething();
});
window.addEventListener('popstate', e => {
console.log('State changed', e);
doSomething();
});
P.S. All these methods can be used in a WebExtension's content script. It's because the case we're looking at is where the URL was changed via history.pushState or replaceState so the page itself remained the same with the same content script environment.
Another approach depending on how you are changing the div.
If you are using JQuery to change a div's contents with its html() method, you can extend that method and call a registration function each time you put html into a div.
(function( $, oldHtmlMethod ){
// Override the core html method in the jQuery object.
$.fn.html = function(){
// Execute the original HTML method using the
// augmented arguments collection.
var results = oldHtmlMethod.apply( this, arguments );
com.invisibility.elements.findAndRegisterElements(this);
return results;
};
})( jQuery, jQuery.fn.html );
We just intercept the calls to html(), call a registration function with this, which in the context refers to the target element getting new content, then we pass on the call to the original jquery.html() function. Remember to return the results of the original html() method, because JQuery expects it for method chaining.
For more info on method overriding and extension, check out http://www.bennadel.com/blog/2009-Using-Self-Executing-Function-Arguments-To-Override-Core-jQuery-Methods.htm, which is where I cribbed the closure function. Also check out the plugins tutorial at JQuery's site.
In addition to the "raw" tools provided by MutationObserver API, there exist "convenience" libraries to work with DOM mutations.
Consider: MutationObserver represents each DOM change in terms of subtrees. So if you're, for instance, waiting for a certain element to be inserted, it may be deep inside the children of mutations.mutation[i].addedNodes[j].
Another problem is when your own code, in reaction to mutations, changes DOM - you often want to filter it out.
A good convenience library that solves such problems is mutation-summary (disclaimer: I'm not the author, just a satisfied user), which enables you to specify queries of what you're interested in, and get exactly that.
Basic usage example from the docs:
var observer = new MutationSummary({
callback: updateWidgets,
queries: [{
element: '[data-widget]'
}]
});
function updateWidgets(summaries) {
var widgetSummary = summaries[0];
widgetSummary.added.forEach(buildNewWidget);
widgetSummary.removed.forEach(cleanupExistingWidget);
}
Essentially I want to have a script execute when the contents of a DIV change. Since the scripts are separate (content script in the Chrome extension & webpage script), I need a way simply observe changes in DOM state. I could set up polling but that seems sloppy.
For a long time, DOM3 mutation events were the best available solution, but they have been deprecated for performance reasons. DOM4 Mutation Observers are the replacement for deprecated DOM3 mutation events. They are currently implemented in modern browsers as MutationObserver (or as the vendor-prefixed WebKitMutationObserver in old versions of Chrome):
MutationObserver = window.MutationObserver || window.WebKitMutationObserver;
var observer = new MutationObserver(function(mutations, observer) {
// fired when a mutation occurs
console.log(mutations, observer);
// ...
});
// define what element should be observed by the observer
// and what types of mutations trigger the callback
observer.observe(document, {
subtree: true,
attributes: true
//...
});
This example listens for DOM changes on document and its entire subtree, and it will fire on changes to element attributes as well as structural changes. The draft spec has a full list of valid mutation listener properties:
childList
Set to true if mutations to target's children are to be observed.
attributes
Set to true if mutations to target's attributes are to be observed.
characterData
Set to true if mutations to target's data are to be observed.
subtree
Set to true if mutations to not just target, but also target's descendants are to be observed.
attributeOldValue
Set to true if attributes is set to true and target's attribute value before the mutation needs to be recorded.
characterDataOldValue
Set to true if characterData is set to true and target's data before the mutation needs to be recorded.
attributeFilter
Set to a list of attribute local names (without namespace) if not all attribute mutations need to be observed.
(This list is current as of April 2014; you may check the specification for any changes.)
Edit
This answer is now deprecated. See the answer by apsillers.
Since this is for a Chrome extension, you might as well use the standard DOM event - DOMSubtreeModified. See the support for this event across browsers. It has been supported in Chrome since 1.0.
$("#someDiv").bind("DOMSubtreeModified", function() {
alert("tree changed");
});
See a working example here.
Many sites use AJAX/XHR/fetch to add, show, modify content dynamically and window.history API instead of in-site navigation so current URL is changed programmatically. Such sites are called SPA, short for Single Page Application.
Usual JS methods of detecting page changes
MutationObserver (docs) to literally detect DOM changes.
Info/examples:
How to change the HTML content as it's loading on the page
Performance of MutationObserver to detect nodes in entire DOM.
Lightweight observer to react to a change only if URL also changed:
let lastUrl = location.href;
new MutationObserver(() => {
const url = location.href;
if (url !== lastUrl) {
lastUrl = url;
onUrlChange();
}
}).observe(document, {subtree: true, childList: true});
function onUrlChange() {
console.log('URL changed!', location.href);
}
Event listener for sites that signal content change by sending a DOM event:
pjax:end on document used by many pjax-based sites e.g. GitHub,
see How to run jQuery before and after a pjax load?
message on window used by e.g. Google search in Chrome browser,
see Chrome extension detect Google search refresh
yt-navigate-finish used by Youtube,
see How to detect page navigation on YouTube and modify its appearance seamlessly?
Periodic checking of DOM via setInterval:
Obviously this will work only in cases when you wait for a specific element identified by its id/selector to appear, and it won't let you universally detect new dynamically added content unless you invent some kind of fingerprinting the existing contents.
Cloaking History API:
let _pushState = History.prototype.pushState;
History.prototype.pushState = function (state, title, url) {
_pushState.call(this, state, title, url);
console.log('URL changed', url)
};
Listening to hashchange, popstate events:
window.addEventListener('hashchange', e => {
console.log('URL hash changed', e);
doSomething();
});
window.addEventListener('popstate', e => {
console.log('State changed', e);
doSomething();
});
P.S. All these methods can be used in a WebExtension's content script. It's because the case we're looking at is where the URL was changed via history.pushState or replaceState so the page itself remained the same with the same content script environment.
Another approach depending on how you are changing the div.
If you are using JQuery to change a div's contents with its html() method, you can extend that method and call a registration function each time you put html into a div.
(function( $, oldHtmlMethod ){
// Override the core html method in the jQuery object.
$.fn.html = function(){
// Execute the original HTML method using the
// augmented arguments collection.
var results = oldHtmlMethod.apply( this, arguments );
com.invisibility.elements.findAndRegisterElements(this);
return results;
};
})( jQuery, jQuery.fn.html );
We just intercept the calls to html(), call a registration function with this, which in the context refers to the target element getting new content, then we pass on the call to the original jquery.html() function. Remember to return the results of the original html() method, because JQuery expects it for method chaining.
For more info on method overriding and extension, check out http://www.bennadel.com/blog/2009-Using-Self-Executing-Function-Arguments-To-Override-Core-jQuery-Methods.htm, which is where I cribbed the closure function. Also check out the plugins tutorial at JQuery's site.
In addition to the "raw" tools provided by MutationObserver API, there exist "convenience" libraries to work with DOM mutations.
Consider: MutationObserver represents each DOM change in terms of subtrees. So if you're, for instance, waiting for a certain element to be inserted, it may be deep inside the children of mutations.mutation[i].addedNodes[j].
Another problem is when your own code, in reaction to mutations, changes DOM - you often want to filter it out.
A good convenience library that solves such problems is mutation-summary (disclaimer: I'm not the author, just a satisfied user), which enables you to specify queries of what you're interested in, and get exactly that.
Basic usage example from the docs:
var observer = new MutationSummary({
callback: updateWidgets,
queries: [{
element: '[data-widget]'
}]
});
function updateWidgets(summaries) {
var widgetSummary = summaries[0];
widgetSummary.added.forEach(buildNewWidget);
widgetSummary.removed.forEach(cleanupExistingWidget);
}