I have two elements. When I click the left element I want to change the right element into another element. If the left element is not clicked again the right element changes back to its original state. I've been able to make that happen, but I want to be able to click on that element again and have the interval I set restart. I feel like I'm close.
var changeImage = function(){
if(imageClicked == true){
var Img = document.getElementById('Img');
Img.setAttribute('src', "./images/img2.jpg");
imageTimeout = setTimeout(function(){
var Image = document.getElementById('Image');
Image.setAttribute('src', './images/image.jpg');
}, 3000)
imageClicked = false;
return imageTimeout;
} else {
imageClicked = true;
resetTimer();
}
}
var resetTimer = function(){
clearTimeout(imageTimeout);
window.setTimeout(imageTimeout, 3000);
}
random_image.addEventListener("click", changeImage, false);
The problem is that you are calling setTimeout(function ,delay) without a callback function.
The issue is in this line in the else block:
window.setTimeout(imageTimeout, 3000);
where imageTimeout is not a function, but the id of the timeout.
You need to create a separate function (let's call it timeoutFunction for example) with the timeout code and call it every time you invoke setTimeout.
After you create that function, and call it in the if block as well, change that line to:
imageTimeout = window.setTimeout(timeoutFunction, 3000);
from your code:
function timeoutFunction(){
var flowerImage = document.getElementById('flowerP');
flowerImage.setAttribute('src', './images/flowers.jpg');
}
by the way, you can define that flowerImage variable outside that function once instead of searching the DOM every time.
In order to clear a timeout, you need to call the clearTimeout function with the reference to the object that was returned by window.setTimeout. So you need to change your code to:
var resetTimer = function() {
clearTimeout(timeoutId);
createjs.Sound.stop(playSoundD);
timeoutId = window.setTimeout(imagetimeout, 3000);
console.log("I've been reset");
}
Related
I have a setInterval on a function X that runs every 500ms. In this function X, I call another function Y that essentially binds an event on some divs. However, I would like to unbind these events the next time the function X is called (to start "fresh"). My code doesn't seem to work:
setInterval(this.board.updateBoard, 500); //called from another constructor
This then initiates the functions below:
Board.prototype.updateBoard = function() {
//I attempt to unbind ALL my divs
var divs = this.$el.find("div");
for(var i = 0; i < divs.length; i++) {
$(divs[i]).unbind(); //Apparently this doesn't work?
}
//...some code here...
//find appropriate $div's (multiple of them), and then calls this.beginWalking() below on each of those
//loop here
this.beginWalking($div, direction + "0", direction + "1");
//end of loop
}
//alternate between classes to give appearance of walking
Board.prototype.beginWalking = function ($div, dir0, dir1) {
return setInterval(function () {
if ($div.hasClass(dir0)) {
$div.removeClass(dir0);
$div.addClass(dir1);
} else {
$div.removeClass(dir1);
$div.addClass(dir0);
}
}.bind(this), 80);
};
Basically, updateBoard is called every 500ms. Each time it's called, beginWalking is called to set another interval on a div. The purpose of this other interval, which functions correctly, is to add and remove a class every 80ms. I just can't seem to unbind everything before the next updateBoard is called.
Any suggestions appreciated!
use clearInterval()
edit: $(selector).toggleClass(dir0) might also be helpful
// In other file, use a global (no var) if you need to read it from another file:
updaterGlobal = setInterval(this.board.updateBoard, 500);
// store interval references for clearing:
var updaterLocals = [];
Board.prototype.updateBoard = function() {
//I attempt to unbind ALL my divs
var divs = this.$el.find("div");
// Stop existing div timers:
while(updaterLocals.length > 0){
clearInterval(updaterLocals[0]);
updaterLocals.shift(); // remove the first timer
}
//...some code here...
//loop here to call the below on several $div's
this.beginWalking($div, direction + "0", direction + "1");
//end of loop
}
//alternate between classes to give appearance of walking
Board.prototype.beginWalking = function ($div, dir0, dir1) {
var interval = setInterval(function () {
if ($div.hasClass(dir0)) {
$div.removeClass(dir0);
$div.addClass(dir1);
} else {
$div.removeClass(dir1);
$div.addClass(dir0);
}
}.bind(this), 80);
// Save the timer:
updaterLocals.push(interval);
return;
};
i have call function on onkeyup event of textbox which pass the data using ajax.below is sample code of my function which in .js file.
var timeout;
function testfont(id,image)
{
alert('image');//when alert here it shows value
clearTimeout(timeout);
timeout = setTimeout( function()
{
if(image.match(/_small/g))
{
var image = image.replace('_small','');
} else {
var image = image;
}
alert('image'); //when alert here it show undefined
}, 500);
}
But the problem is that i get the image value undefined inside setTimeout function.it works perfectly without use of setTimeout but i need setTimeout function for event fire after some time.
how can i resolve this?
You are making variables in each of your condition.
function testfont(id,image)
{
clearTimeout(timeout);
timeout = setTimeout( function() {
if(image.match(/_small/g)){
image = image.replace('_small','');
}
else{
image = image;
}
alert(image);//when alert here it show undefined
}, 500);
}
I'm using JS to animate two images by having them toggle on and off. I have an initial image which, when the animation is turned on, appears on the screen and stays on. The second image, which has a higher z value, is then set to toggle on and off every 1 second in the same location as the first image, so it appears as if the two are alternating.
I'm using window.setInterval to make the second image blink, but when I need to turn the animation off (and I'm removing both images from the screen), my window.clearInterval is not "working" The first image will be gone, but the second one keeps blinking on and off every second.
Code:
function notebookNotification(setting)
{
$("#lightNotificationContainer").show();
var notificationAnimation = window.setInterval('$("#darkNotificationContainer").toggle()', 1000);
if(setting == 0)
{
window.clearInterval(notificationAnimation);
$("#lightNotificationContainer").hide();
$("#darkNotificationContainer").hide();
}
}
Anyone see why it isn't working?
Reading between the lines, I think what you're saying is this:
You execute notebookNotification(1); and the animation starts
You execute notebookNotification(0); and the animation does not stop.
My guess is that you want notebookNotification(0) to disable the flashing.
In order to do that, you need to rework this function considerably. You need to store the intervalID that comes from setInterval in a variable that survives outside of the scope of this function and can be used for clearInterval on subsequent calls to this function.
For example:
var intervalID;
function notebookNotification(setting)
{
if(setting == 0)
{
if(intervalID) {
window.clearInterval(intervalID);
intervalID = null;
}
$("#lightNotificationContainer").hide();
$("#darkNotificationContainer").hide();
}
else
{
$("#lightNotificationContainer").show();
if(!intervalID) {
intervalID = window.setInterval('$("#darkNotificationContainer").toggle()', 1000);
}
}
}
Here, try this:
http://jsfiddle.net/WGxmy/
Saving the interval to a global variable -- not one inside a function -- lets you clear it later.
var keepflashing = true;
var isShowing = true;
function notebookNotification()
{
if(!isShowing)
$("#lightNotificationContainer").show();
else
$("#lightNotificationContainer").show();
isShowing = !isShowing;
if(keepflashing)
setTimeout( function(){ notebookNotification(setting); },100);
else
{
$("#lightNotificationContainer").hide();
$("#darkNotificationContainer").hide();
}
}
Maybe you can avoid calling clearInterval() generally?
function notebookNotification(setting)
{
if(setting == 0)
{
$("#lightNotificationContainer").hide();
$("#darkNotificationContainer").hide();
}
else
{
$("#lightNotificationContainer").show();
window.setInterval('$("#darkNotificationContainer").toggle()', 1000);
}
}
I try to make a page to go to the startpage after eg. 10sec of inactivity (user not clicking anywhere). I use jQuery for the rest but the set/clear in my test function are pure javascript.
In my frustation I ended up with something like this function that I hoped I could call on any click on the page. The timer starts fine, but is not reset on a click. If the function is called 5 times within the first 10 seconds, then 5 alerts will apear... no clearTimeout...
function endAndStartTimer() {
window.clearTimeout(timer);
var timer;
//var millisecBeforeRedirect = 10000;
timer = window.setTimeout(function(){alert('Hello!');},10000);
}
Any one got some lines of code that will do the trick?
- on any click stop, reset and start the timer.
- When timer hits eg. 10sec do something.
You need to declare timer outside the function. Otherwise, you get a brand new variable on each function invocation.
var timer;
function endAndStartTimer() {
window.clearTimeout(timer);
//var millisecBeforeRedirect = 10000;
timer = window.setTimeout(function(){alert('Hello!');},10000);
}
The problem is that the timer variable is local, and its value is lost after each function call.
You need to persist it, you can put it outside the function, or if you don't want to expose the variable as global, you can store it in a closure, e.g.:
var endAndStartTimer = (function () {
var timer; // variable persisted here
return function () {
window.clearTimeout(timer);
//var millisecBeforeRedirect = 10000;
timer = window.setTimeout(function(){alert('Hello!');},10000);
};
})();
That's because timer is a local variable to your function.
Try creating it outside of the function.
A way to use this in react:
class Timeout extends Component {
constructor(props){
super(props)
this.state = {
timeout: null
}
}
userTimeout(){
const { timeout } = this.state;
clearTimeout(timeout);
this.setState({
timeout: setTimeout(() => {this.callAPI()}, 250)
})
}
}
Helpful if you'd like to only call an API after the user has stopped typing for instance. The userTimeout function could be bound via onKeyUp to an input.
Not sure if this violates some good practice coding rule but I usually come out with this one:
if(typeof __t == 'undefined')
__t = 0;
clearTimeout(__t);
__t = setTimeout(callback, 1000);
This prevent the need to declare the timer out of the function.
EDIT: this also don't declare a new variable at each invocation, but always recycle the same.
Hope this helps.
Practical example Using Jquery for a dropdown menu !
On mouse over on #IconLoggedinUxExternal shows div#ExternalMenuLogin and set time out to hide the div#ExternalMenuLogin
On mouse over on div#ExternalMenuLogin it cancels the timeout.
On mouse out on div#ExternalMenuLogin it sets the timeout.
The point here is always to invoke clearTimeout before set the timeout, as so, avoiding double calls
var ExternalMenuLoginTO;
$('#IconLoggedinUxExternal').on('mouseover mouseenter', function () {
clearTimeout( ExternalMenuLoginTO )
$("#ExternalMenuLogin").show()
});
$('#IconLoggedinUxExternal').on('mouseleave mouseout', function () {
clearTimeout( ExternalMenuLoginTO )
ExternalMenuLoginTO = setTimeout(
function () {
$("#ExternalMenuLogin").hide()
}
,1000
);
$("#ExternalMenuLogin").show()
});
$('#ExternalMenuLogin').on('mouseover mouseenter', function () {
clearTimeout( ExternalMenuLoginTO )
});
$('#ExternalMenuLogin').on('mouseleave mouseout', function () {
clearTimeout( ExternalMenuLoginTO )
ExternalMenuLoginTO = setTimeout(
function () {
$("#ExternalMenuLogin").hide()
}
,500
);
});
This works well. It's a manager I've made to handle hold events. Has events for hold, and for when you let go.
function onUserHold(element, func, hold, clearfunc) {
//var holdTime = 0;
var holdTimeout;
element.addEventListener('mousedown', function(e) {
holdTimeout = setTimeout(function() {
func();
clearTimeout(holdTimeout);
holdTime = 0;
}, hold);
//alert('UU');
});
element.addEventListener('mouseup', clearTime);
element.addEventListener('mouseout', clearTime);
function clearTime() {
clearTimeout(holdTimeout);
holdTime = 0;
if(clearfunc) {
clearfunc();
}
}
}
The element parameter is the one which you hold. The func parameter fires when it holds for a number of milliseconds specified by the parameter hold. The clearfunc param is optional and if it is given, it will get fired if the user lets go or leaves the element. You can also do some work-arounds to get the features you want. Enjoy! :)
<!DOCTYPE html>
<html>
<body>
<h2>EJEMPLO CONOMETRO CANCELABLE</h2>
<button onclick="inicioStart()">INICIO</button>
<input type="text" id="demostracion">
<button onclick="finStop()">FIN</button>
<script>
let cuenta = 0;
let temporalTiempo;
let statusTime = false;
function cronometro() {
document.getElementById("demostracion").value = cuenta;
cuenta++;
temporalTiempo = setTimeout(cronometro, 500);
}
function inicioStart() {
if (!Boolean(statusTime)) {
statusTime = true;
cronometro();
}
}
function finStop() {
clearTimeout(temporalTiempo);
statusTime = false;
}
</script>
</body>
</html>
I have the following:
window.setTimeout(function() {
window.location.href = 'file.php';
}, 115000);
How can I, via a .click function, reset the counter midway through the countdown?
You can store a reference to that timeout, and then call clearTimeout on that reference.
// in the example above, assign the result
var timeoutHandle = window.setTimeout(...);
// in your click function, call clearTimeout
window.clearTimeout(timeoutHandle);
// then call setTimeout again to reset the timer
timeoutHandle = window.setTimeout(...);
clearTimeout() and feed the reference of the setTimeout, which will be a number. Then re-invoke it:
var initial;
function invocation() {
alert('invoked')
initial = window.setTimeout(
function() {
document.body.style.backgroundColor = 'black'
}, 5000);
}
invocation();
document.body.onclick = function() {
alert('stopped')
clearTimeout( initial )
// re-invoke invocation()
}
In this example, if you don't click on the body element in 5 seconds the background color will be black.
Reference:
https://developer.mozilla.org/en/DOM/window.clearTimeout
https://developer.mozilla.org/En/Window.setTimeout
Note: setTimeout and clearTimeout are not ECMAScript native methods, but Javascript methods of the global window namespace.
You will have to remember the timeout "Timer", cancel it, then restart it:
g_timer = null;
$(document).ready(function() {
startTimer();
});
function startTimer() {
g_timer = window.setTimeout(function() {
window.location.href = 'file.php';
}, 115000);
}
function onClick() {
clearTimeout(g_timer);
startTimer();
}
var myTimer = setTimeout(..., 115000);
something.click(function () {
clearTimeout(myTimer);
myTimer = setTimeout(..., 115000);
});
Something along those lines!
For NodeJS it's super simple:
const timeout = setTimeout(...);
timeout.refresh();
From the docs:
timeout.refresh()
Sets the timer's start time to the current time, and reschedules the timer to call its callback at the previously specified duration adjusted to the current time. This is useful for refreshing a timer without allocating a new JavaScript object.
But it won't work in JavaScript because in browser setTimeout() returns a number, not an object.
This timer will fire a "Hello" alertbox after 30 seconds. However, everytime you click the reset timer button it clears the timerHandle then re-sets it again. Once it's fired, the game ends.
<script type="text/javascript">
var timerHandle = setTimeout("alert('Hello')",3000);
function resetTimer() {
window.clearTimeout(timerHandle);
timerHandle = setTimeout("alert('Hello')",3000);
}
</script>
<body>
<button onclick="resetTimer()">Reset Timer</button>
</body>
var redirectionDelay;
function startRedirectionDelay(){
redirectionDelay = setTimeout(redirect, 115000);
}
function resetRedirectionDelay(){
clearTimeout(redirectionDelay);
}
function redirect(){
location.href = 'file.php';
}
// in your click >> fire those
resetRedirectionDelay();
startRedirectionDelay();
here is an elaborated example for what's really going on http://jsfiddle.net/ppjrnd2L/
i know this is an old thread but i came up with this today
var timer = []; //creates a empty array called timer to store timer instances
var afterTimer = function(timerName, interval, callback){
window.clearTimeout(timer[timerName]); //clear the named timer if exists
timer[timerName] = window.setTimeout(function(){ //creates a new named timer
callback(); //executes your callback code after timer finished
},interval); //sets the timer timer
}
and you invoke using
afterTimer('<timername>string', <interval in milliseconds>int, function(){
your code here
});
$(function() {
(function(){
var pthis = this;
this.mseg = 115000;
this.href = 'file.php'
this.setTimer = function() {
return (window.setTimeout( function() {window.location.href = this.href;}, this.mseg));
};
this.timer = pthis.setTimer();
this.clear = function(ref) { clearTimeout(ref.timer); ref.setTimer(); };
$(window.document).click( function(){pthis.clear.apply(pthis, [pthis])} );
})();
});
To reset the timer, you would need to set and clear out the timer variable
$time_out_handle = 0;
window.clearTimeout($time_out_handle);
$time_out_handle = window.setTimeout( function(){---}, 60000 );