I'm using jQuery to handle Ajax-calls.
I've noticed that, about 5% off the time, the ajax call fails. To make sure I get a good understanding of what's going wrong, I use this code:
$.ajax({
type:'POST',
url:'somepage.php',
data:{somedata:somedata},
success:function (data) {
var IS_JSON = true;
try
{
var newdata = jQuery.parseJSON(data);
}
catch(err)
{
IS_JSON = false;
}
if(IS_JSON)
{
//this is the part where a correct response is handled
}
else
{
//In case somepage.php gives a php-error, I put the exact error (=data) in the error-table at error.php.
window.location = "error.php?errorstring="+data;
}
},
error:function (XMLHttpRequest, textStatus, errorThrown) {
//In case the ajax errors, I store the response (timeout, error, ...) in the database at error.php
window.location = "error.php?errorstring="+textStatus;
}
});
"Good" responses contain JSON, which I parse. If it's not JSON (for example just raw text from an php error) I don't try to parse it, but store the error in my database.
I would understand errors containing php errors that occured on somepage.php (since it's quiet a large page), but I'm supprised that the main errors I get, are errors of the ajax failing. The response data is just "error".
Anyone knows what the cause could be? What causes ajax-calls to fail? It's not a timeout, and it's also nothing like that somepage.php wasn't found or something. It's also not an error on somepage.php, since in that case, the Ajax-call would be successful, and the php-error would be logged in my database.
Edit: I used this obfuscator to make the script a little harder to read... Don't know if this could be causing the errors...
You should set dataType: 'json' in your ajax call. Coz if your not setting this up and your expecting a json result, the result will be treated as 'string' by default.
In jQuery, I'm submitting forms to the server. When there is a validation error, I receive a 400 error from the server, and the body of the document is valid JSON. I would like to know how to access the data returned from the server.
My .error callback function on the jQuery.Ajax object is never called, so I'm using .statusCode{400} function. This runs just fine, however none of the arguments contain the response body.
I try to get json response with a status 400, and it works on IE7,8 and 9, Firefox and Chrome (Safari not tested).
...
error: function(xhr) {
error(xhr.responseText);
}
...
Some browsers' XHR implementations refuse to provide the response body if the HTTP status is not 2xx. What I've had to resort to in API design where I couldn't control my clients was to do something like always return 200 and indicate success/failure/status in some other way (e.g., as a top-level attribute in the JSON response).
I have had no trouble using statusCode in the callback, However, statusCode as a callback function Does NOT return any data.
jQuery.Ajax
I think you should try a different approach on how to handle validation errors in the server side, to return status code 200, but with a parameter like "error_count" and go from there.
can you post some of the code you are using (just $.ajax you are using...) ?
For me (Chrome), responseText property of the xhr response contains only "BAD REQUEST" when statusCode is 400. Thanks Steven for your response; I was struggling with this since in Postman I could get the json data I was returning from my REST controller, but couldn't find it on the jQuery Ajax response.
"If json is specified, the response is parsed using jQuery.parseJSON before being passed, as an object, to the success handler. The parsed JSON object is made available through the responseJSON property of the jqXHR object."
http://api.jquery.com/jquery.ajax/
If you're specifying your callback with statusCode as mentioned in the question:
"If the request is successful, the status code functions take the same parameters as the success callback; if it results in an error (including 3xx redirect), they take the same parameters as the error callback." (jqXHR, textStatus, errorThrown)
I am trying to perform this AJAX post but for some reason I am getting a server 500 error. I can see it hit break points in the controller. So the problem seems to be on the callback. Anyone?
$.ajax({
type: "POST",
url: "InlineNotes/Note.ashx?id=" + noteid,
data: "{}",
dataType: "json",
success: function(data) {
alert(data[1]);
},
error: function(data){
alert("fail");
}
});
This is the string that should be returned:
{status:'200', text: 'Something'}
I suspect that the server method is throwing an exception after it passes your breakpoint. Use Firefox/Firebug or the IE8 developer tools to look at the actual response you are getting from the server. If there has been an exception you'll get the YSOD html, which should help you figure out where to look.
One more thing -- your data property should be {} not "{}", the former is an empty object while the latter is a string that is invalid as a query parameter. Better yet, just leave it out if you aren't passing any data.
in case if someone using the codeigniter framework, the problem may be caused by the csrf protection config enabled.
This is Ajax Request Simple Code To Fetch Data Through Ajax Request
$.ajax({
type: "POST",
url: "InlineNotes/Note.ashx",
data: '{"id":"' + noteid+'"}',
contentType: "application/json; charset=utf-8",
dataType: "json",
success: function(data) {
alert(data.d);
},
error: function(data){
alert("fail");
}
});
I just had this problem myself, even though i couldn't find the reason for it in my case, when changing from POST to GET, the problem 500 error disappeared!
type:'POST'
I experienced a similar compound error, which required two solutions. In my case the technology stack was MVC/ ASP.NET / IIS/ JQuery. The server side was failing with a 500 error, and this was occurring before the request was handled by the controller making the debug on the server side difficult.
The following client side debug enabled me to determine the server error
In the $.ajax error call back, display the error detail to the console
error: (error) => {
console.log(JSON.stringify(error));
}
This at least, enabled me to view the initial server error
“The JSON request was too large to be serialized”
This was resolved in the client web.config
<appSettings>
<add key="aspnet:MaxJsonDeserializerMembers" value="150000" />
However, the request still failed. But this time with a different error that I was now able to debug on the server side
“Request Entity too large”
This was resolved by adding the following to the service web.config
<configuration>
…
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" maxBufferPoolSize="524288">
<readerQuotas maxDepth="32" maxStringContentLength="2147483647"
maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" />
</binding>
</basicHttpBinding>
</bindings>
The configuration values may require further tuning, but at least it resolved the server errors caused by the ajax post.
You can look up HTTP status codes here (or here), this error is telling you:
"The server encountered an unexpected condition which prevented it from fulfilling the request."
You need to debug your server.
I run into the same thing today. As suggested before get Firebug for Firefox, Enable Console and preview POST response. That helped me to find out how stupid the problem was. My action was expecting value of a type int and I was posting string. (ASP.NET MVC2)
There should be an event logged in the EventVwr (Warning from asp.net), which could provide you more details on where the error could be.
A 500 from ASP.NET probably means an unhandled exception was thrown at some point when serving the request.
I suggest you attach a debugger to the web server process (assuming you have access).
One strange thing: You make a POST request to the server, but you do not pass any data (everything is in the query string). Perhaps it should be a GET request instead?
You should also double check that the URL is correct.
I just face this problem today. with this kind of error, you won't get any responses from server, therefore, it's very hard to locate the problem.
But I can tell you "500 internal server error" is error with server not client, you got an error in server side script. Comment out the code closure by closure and try to run it again, you'll soon find out you miss a character somewhere.
You can also get that error in VB if the function you're calling starts with Public Shared Function rather than Public Function in the webservice. (As might happen if you move or copy the function out of a class). Just another thing to watch for.
Can you post the signature of your method that is supposed to accept this post?
Additionally I get the same error message, possibly for a different reason. My YSOD talked about the dictionary not containing a value for the non-nullable value.
The way I got the YSOD information was to put a breakpoint in the $.ajax function that handled an error return as follows:
<script type="text/javascript" language="javascript">
function SubmitAjax(url, message, successFunc, errorFunc) {
$.ajax({
type:'POST',
url:url,
data:message,
contentType: 'application/json; charset=utf-8',
dataType: 'json',
success:successFunc,
error:errorFunc
});
};
Then my errorFunc javascript is like this:
function(request, textStatus, errorThrown) {
$("#install").text("Error doing auto-installer search, proceed with ticket submission\n"
+request.statusText); }
Using IE I went to view menu -> script debugger -> break at next statement.
Then went to trigger the code that would launch my post. This usually took me somewhere deep inside jQuery's library instead of where I wanted, because the select drop down opening triggered jQuery. So I hit StepOver, then the actual next line also would break, which was where I wanted to be. Then VS goes into client side(dynamic) mode for that page, and I put in a break on the $("#install") line so I could see (using mouse over debugging) what was in request, textStatus, errorThrown. request. In request.ResponseText there was an html message where I saw:
<title>The parameters dictionary contains a null entry for parameter 'appId' of non-nullable type 'System.Int32' for method 'System.Web.Mvc.ContentResult CheckForInstaller(Int32)' in 'HLIT_TicketingMVC.Controllers.TicketController'. An optional parameter must be a reference type, a nullable type, or be declared as an optional parameter.<br>Parameter name: parameters</title>
so check all that, and post your controller method signature in case that's part of the issue
I found myself having this error to. I had .htaccess redirect configured in a directory. Well it reroutes ajax calls to ofcourse ($.post(../ajax.php)), so it couldn't find the actual file (resulting in 500 error).
I 'fixed' it by placing the ajax.php in a directory (So .htaccess didn't affect).
I was able to find the solution using the Chrome debugger (I don't have Firebug or other third-party tools installed)
Go to developer tab (CTRL+MAJ+I)
Network > click on the request which failed, in red > Preview
It showed me that I had a problem on the server, when I was returning a value which was self-referencing.
In my case it was simple issue, but hard to find. Page directive had wrong Inherits attributes. It just need to include the top level and it worked.
Wrong code
<%# Page Language="C#" CodeBehind="BusLogic.aspx.cs" Inherits="BusLogic"%>
Correct code
<%# Page Language="C#" CodeBehind="BusLogic.aspx.cs" Inherits="Web.BusLogic" %>
When using the CodeIgniter framework with CSRF protection enabled, load the following script in every page where an ajax POST may happen:
$(function(){
$.ajaxSetup({
data: {
<?php echo $this->config->item('csrf_token_name'); ?>: $.cookie('<?php echo $this->config->item('csrf_cookie_name'); ?>')
}
});
});
Requires: jQuery and jQuery.cookie plugin
Sources: https://stackoverflow.com/a/7154317/2539869 and http://jerel.co/blog/2012/03/a-simple-solution-to-codeigniter-csrf-protection-and-ajax
The JSON data you are passing to the server should have same name as you forming in client side.
Ex:
var obj = { Id: $('#CompanyId').val(),
Name: $("#CompanyName").val()
};
$.Ajax(data: obj,
url: "home/InsertCompany".....
If the name is different, ex:
[HttpPost]
public ActionResult InsertCompany(Int32 Id, string WrongName)
{
}
You will get this error.
If you are not passing the data, remove the data attribute from AJAX request.
I had this issue, and found out that the server side C# method should be static.
Client Side:
$.ajax({
type: "POST",
url: "Default.aspx/ListItem_Selected",
data: "{}",
dataType: "json",
contentType: "application/json; charset=utf-8",
success: ListItemElectionSuccess,
error: ListItemElectionError
});
function ListItemElectionSuccess(data) {
alert([data.d]);
}
function ListItemElectionError(data) {
}
Server Side:
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
}
[WebMethod]
[ScriptMethod(ResponseFormat = ResponseFormat.Json)]
public static String ListItem_Selected()
{
return "server responce";
}
}
As mentioned I think your return string data is very long. so the JSON format has been corrupted.
There's other way for this problem. You should change the max size for JSON data in this way :
Open the Web.Config file and paste these lines into the configuration section
<system.web.extensions>
<scripting>
<webServices>
<jsonSerialization maxJsonLength="50000000"/>
</webServices>
</scripting>
</system.web.extensions>
Use a Try Catch block on your server side and in the catch block pass back the exception error to the client. This should give you a helpful error message.
I also faced the same problem. Here are two ways by which I have solved it-
1. If you're using some framework, make sure you are sending a CSRF token with the ajax call as well
Here is how the syntax will look like for laravel -
<meta name="_token" content="{{ csrf_token() }}">
In your js file make sure to call this before sending the ajax call
$.ajaxSetup({
headers: {
'X_CSRF-TOKEN' : $('meta[name="_token"]').attr('content')
}
});
Another way to solve it would be to change method from post to get
For me, the error was in php file to which i was sending request.
Error was in database connectivity. After fixing the php code, error resolved.
Your code contains dataType: json.
In this case jQuery evaluates the response as JSON and returns a JavaScript object. The JSON data is parsed in a strict manner. Any malformed JSON is rejected and a parse error is thrown. An empty response is also rejected.
The server should return a response of null or {} instead.
I found this occurred in chrome when I did two ajax queries in the jquery 'on load' handler,
i.e. like $(function() { $.ajax() ... $.ajax() ... });
I avoided it using:
setTimeout(function_to_do_2nd_ajax_request, 1);
it's presumably a chrome and/or jquery bug
I had this problem because the page I called ajax post from had EnableViewState="false" and EnableViewStateMac="false" but not the page called.
When I put this on both pages everything started to work. I suspected this when I saw MAC address exception.
Your return string data can be very long.
<system.web>
<compilation debug="true" targetFramework="4.0" />
<httpRuntime maxRequestLength="2147483647" />
</system.web>
For example:
1 Char = 1 Byte
5 Char = 5 Byte
"Hakki" = 5 Byte
I have had similar issues with AJAX code that sporadically returns the "500 internal server error". I resolved the problem by increasing the "fastCGI" RequestTimeout and ActivityTimeout values.
I'm late on this, but I was having this issue and what I've learned was that it was an error on my PHP code (in my case the syntax of a select to the db). Usually this error 500 is something to do using syntax - in my experience. In other word: "peopleware" issue! :D
As an addition to the "malformed JSON" answer, if the query you are running returns an object or anything that prevents the data to be serialised, you will get this error. You should always be sure you have JSON and only JSON at the end of your action method or whatever it is you are getting the data from.
Usually your property is not completely right or something wrong with your server processing.
I'm trying to login to a Google Account for request Picassa Web photos with AJAX. That's the code:
xmlhttp=new XMLHttpRequest();
xmlhttp.open("POST","https://www.google.com/accounts/Login",true);
xmlhttp.send("accountType=HOSTED_OR_GOOGLE&Email=...&Passwd=...&service=lh2&source=prova");
document.getElementById('prova').innerHTML=xmlhttp.responseText;
With this firebug shows a 200 OK status in the Net tab but an unexplained error in the Console. Of course nothing appears in the div called "prova" since answer is empty.
I also try to add this header:
xmlhttp.setRequestHeader("Content-type","application/x-www-form-urlencoded");
But then firebug shows a 400 Bad Request in the Net tab. Can you help me? Thank you.
You should be able to view the ajax reponse in firebug and see what is gtting posted back to you - you can get a 200 error but still get an error in the post back. Don't you need to do something with an AuthToken too?
Solved! Firefox and new browsers don't let make AJAX call to third-party applications for security reasons. All is explained here: http://www.xml.com/pub/a/2005/11/09/fixing-ajax-xmlhttprequest-considered-harmful.html
Wasn't sure if we got the authToken or not...
Here's how I've been making xDomain Posts:
It requires having a little library (tiny) called flyJSONP, which uses YQL (Yahoo! Query Language) as a JSONP hack. Works great, but cannot post/get headers. After, I send data to php which then makes a cross-domain post with necessary header.
FlyJSONP also works with get... FlyJSONP.get({...
FlyJSONP.post({
url: "https://www.google.com/accounts/ClientLogin",
parameters: {
name: "value"
},
success: function(data) {
console.log("the response is: " + data);
},
error: function(errorMsg) {
console.log(errorMsg);
},
complete: function(data){
console.log("...completed post!");
}
});