I have a table using angularjs where I want to loop through an array to print specific headers from a json object. The header prints out fine, but the problem comes when I try to use a variable from my nested ng-repeat as a json selector. If you replace the inner ng-repeat with the commented section below it, it will work.
Table:
<table>
<thead>
<th ng-repeat="column in tableHeader">{{column}} <a ng-click="sort_by(column);"><i class="glyphicon glyphicon-sort"></i></a></th>
</thead>
<tbody>
<tr ng-repeat="data in filtered>
<td ng-repeat="column2 in tableHeader">{{data.column2}}</td>
<!-- <td>{{data.Environment}}</td>
<td>{{data.HostIP}}</td>
<td>{{data.ServiceName}}</td>
<td>{{data.Status}}</td>
<td>{{data.StartTime}}</td>
<td>{{data.Capacity}}</td>
<td>{{data.Txn}}</td>
<td>{{data.Errors}}</td>
<td>{{data.Build}}</td>
<td>{{data.Project}}</td>
<td>{{data.Author}}</td>
<td>{{data.ModifyDate}}</td>
<td>{{data.Port}}</td>
<td>{{data.BasePath}}</td> -->
</tr>
</tbody>
</table>
Array located in controller:
$scope.tableHeader = ['Environment', 'HostIP', 'Status', 'ServiceName', 'StartTime', 'Capacity', 'Txn', 'Errors', 'Build', 'Project', 'Author', 'ModifyDate', 'Port', 'BasePath'];
I think you're looking for {{data[column2]}}. Since column2 is just the string value of the property you want, treat data like an associative array in this case to get the property you're trying to display.
column2 was created by the ng-repeat and is what you want. Note {{column2}}:
<td ng-repeat="column2 in tableHeader">{{column2}}</td>
Related
Using Ng-table, I have tried to create one table view, that could be controlled from AngularJS parameters.
To control the header text, I need to put it in data-title or ng-data-title (Example: data-title="'Test'")
But, it always makes the table header empty.
Instead of filling it:
Code Snippet:
<td ng-repeat="v in tableSettings.data" data-title="v.name">
{{v.data?v.data(row):row[v.id]}}
</td>
Full Code:
<table ng-table="table" class="table" show-filter="{{tableSettings.filter}}">
<tr ng-repeat="row in $data">
<td ng-repeat="v in tableSettings.data" ng-click="tableSettings.click(row)" ng-attr-data-title="'{{v.name}}'"
ng-if="v.type!='switch'"
sortable="'{{sortable?sortable:v.id}}'">
{{v.data?v.data(row):row[v.id]}}
</td>
</tr>
</table
When I try to parse Angular into it, I just get errors: (press to see the errors)
"'{{v.name}}'" "{{v.name}}"
Is there a way to fix it, or even to parse it manualy from AngularJS?
Ok the problem is that the data-title attribute is meant to be used with static text (well known columns) such as data-title="'My first column'"
If what you need is dynamic columns you got to use the ng-table-dynamic directive.
For example:
<table ng-table-dynamic="tableParams with cols" show-filter="true" class="table table-bordered table-striped">
<tr ng-repeat="row in $data track by row.id">
<td ng-repeat="col in $columns">{{::row[col.field]}}</td>
</tr>
</table>
Take notice in the directive declaration uses a special syntax tablePrams with cols. Here the cols is a $scope variable that must follow the following schema for this to work properly.
$scope.cols = [
{ title: 'ID', field: 'id', filter: { id : 'text' }, show: true, sortable: 'id' },
{ title: 'Installation', field: 'installationAt' },
...
];
Title and field are mandatory whereas filter, show, sortable depend on your usage scenario.
You can play around with this code pen
I have an ng-repeat that iterates through a JSON and renderes a table. What I want to do is to iterate through the value that is a JSON itself. But It behaves like a string.
<tr
ng-repeat="(key,value) in event.kibana._source track by $index"
ng-class-odd="'odd'">
<td>{{key}}</td>
<td>
<span>{{value}}</span>
<span ng-repeat="(k,val) in value track by $index">{{k}}|{{val}} </span>
</td>
</tr>
"value" is a JSON. The result inside the td looks like this:
{"bezeichnung":"Basis","name":"Basis","id":16} 0|{ 1|" 2|b 3|e 4|z 5|e
6|i 7|c 8|h 9|n 10|u 11|n 12|g 13|" 14|: 15|" 16|B 17|a 18|s 19|i 20|s
21|" 22|, 23|" 24|n 25|a 26|m 27|e 28|" 29|: 30|" 31|B 32|a 33|s 34|i
35|s 36|" 37|, 38|" 39|i 40|d 41|" 42|: 43|1 44|6 45|}
Of course this is not what I want. i want to iterate through the JSON and not the string. How can I do that?
EDIT:
THIS is what the JSON looks like:
{
"fold":11,
"id":64894760,
"entities":[{"bezeichnung":"Basis","name":"Basis","id":16}]
}
You have to parse JSON.(ex. JSON.parse(yourString)) https://developer.mozilla.org/ru/docs/Web/JavaScript/Reference/Global_Objects/JSON/parse
try removing track by $index. read the documentation here: ngRepeat
<tr id="{{key}}"
ng-repeat="(key,value) in event.kibana._source"
ng-class-odd="'odd'">
<td>{{key}}</td>
<td>
<span>{{value}}</span> //array of objects, [{"bezeichnung":"Basis","name":"Basis","id":16}]
<div ng-repeat="val in value track by val.id"> //single value in 'value' array
<span ng-repeat="(k,v) in val track by k">{{k}}|{{v}} </span>
</div>
</td>
</tr>
Problem was "value" was an array of object and you had "basis" as value for two keys. So, if tracked using key in the object, AngularJS can differentiate.
I've consider "id" key is unique for a particular value.
I have this data:
{
"order":[
{
"id":1,
"table":1,
"foods":"{'foods':[{'id':2, 'name':'Nasi Minyak', 'qty':1}]}",
"drinks":"{'drinks':[{'id':1,'name':'Teh O Ais','qty':1}]}",
"waiter":"ali",
"foods_status":0,
"drinks_status":0,
"created_at":"2015-07-12T00:30:52.637Z",
"updated_at":"2015-07-12T00:30:52.637Z"
},
{
"id":2,
"table":2,
"foods":"{'foods':[{'id':2, 'name':'Nasi Goreng', 'qty':1}]}",
"drinks":"{'drinks':[{'id':1,'name':'Milo Ais','qty':1}]}",
"waiter":"abu",
"foods_status":0,
"drinks_status":0,
"created_at":"2015-07-12T00:51:43.552Z",
"updated_at":"2015-07-12T00:51:43.552Z"
}
]
}
I try to grab all foods name inside table like this:
<table class="table-bordered table table-striped">
<thead>
<tr>
<td>#</td>
<td>Name</td>
<td>Action</td>
</tr>
</thead>
<tbody>
<tr ng-repeat="order in orders">
<td>{{order.id}}</td>
<td>{{order.foods.name}}</td>
<td>
<button class="btn btn-danger" ng-click="">Delete</button>
</td>
</tr>
</tbody>
</table>
And this is my $http.get to get the data:
$http.get("../api/orders")
.success(function(data) {
var order = data.order;
$scope.orders = order;
});
I managed to bind the id but I could't bind the name inside the foods array.
How to get the name inside the foods array of this data?
Plunker:
http://plnkr.co/edit/2oiOc06cZph4en8DJ18n
You need another ng-reapeat. Something like this:
<tr ng-repeat="order in orders">
<td>{{order.id}}</td>
<td>
<span ng-repeat="item in order.foods.foods">{{item.name}}/</span>
</td>
<td>
<button class="btn btn-danger" ng-click="">Delete</button>
</td>
</tr>
Another consideration is about the format of your JSON. this line:
"foods":"{'foods':[{'id':2, 'name':'Nasi Minyak', 'qty':1}]}"
the way it is, "foods" is holding a String, and not a Object. To make the ng-reapeat work, you will need to force JSON from string using
JSON.parse(jsonString);
or change your JSON to:
"foods":{"foods":[{"id":2, "name":"Nasi Minyak", "qty":1}]}
Side note, why repeat the keys "foods" and "drinks"? Doesn't seem logic to me. Change your data structure to:
"order":[
{
"id":1,
"table":1,
"foods":[{"id":1, "name":"Nasi Kerabu", "qty":1},{"id":2, "name":"Nasi Minyak", "qty":1}],
"drinks":[{"id":1,"name":"Sirap Ais","qty":1},{"id":2, "name":"Milo Ais", "qty":1}],
"waiter":"ali",
"foods_status":0,
"drinks_status":0,
"created_at":"2015-07-12T00:30:52.637Z",
"updated_at":"2015-07-12T03:30:35.684Z"
},
...
]
and use:
<td> <span ng-repeat="item in order.foods">{{item.name}}</span> </td>
Here is a plunker with these modifications:
http://plnkr.co/edit/UVvCVzh4hbsEwolyWpDs?p=preview
Here is a plunker that works http://plnkr.co/edit/snE9Em0tCKh0nUHIlTFn?p=preview.
Consider modifying your JSON file. Use double quotation marks instead of single quotation marks.
In your modified JSON file in your new plunker remove double quotations marks here "[{'id':1,
I have made some changes in your data and it fix the issue you are facing.
Here is plunker link
`http://plnkr.co/edit/nxBGMMyuNIzUOvQAu7YY?p=preview`
Each order would be an object like this:
{
"id":2,
"table":2,
"foods":"{'foods':[{'id':2, 'name':'Nasi Goreng', 'qty':1}]}",
"drinks":"{'drinks':[{'id':1,'name':'Milo Ais','qty':1}]}",
"waiter":"abu",
"foods_status":0,
"drinks_status":0,
"created_at":"2015-07-12T00:51:43.552Z",
"updated_at":"2015-07-12T00:51:43.552Z"
}
Note that foods points to an object, whose only key 'foods' points to an array... whose first component should be an object. However, if you read more closely:
"foods":"{'foods':[{'id':2, 'name':'Nasi Goreng', 'qty':1}]}",
Notice the double quotes surrounding foods's value? They mean that it points to a String instead of an object.
First, you need to delete the double quotes surrounding the values of both foods and drinks:
"foods":{'foods':[{'id':2, 'name':'Nasi Goreng', 'qty':1}]},
"drinks":{'drinks':[{'id':1,'name':'Milo Ais','qty':1}]},
And then replace all the single quotes with double ones, to make the object comply with the JSON object definition:
"foods":{"foods":[{"id":2, "name":"Nasi Goreng", "qty":1}]},
"drinks":{"drinks":[{"id":1,"name":"Milo Ais","qty":1}]},
Now, to get 'name', you need to access order.foods.foods[0].name instead of order.foods.name.
Example JSON:
[{"name":"John", "date_of_birth":"01/12/1987","marital_status": "Open Relationship"}]
Example view:
<table>
<tr>
<th> Name </th>
<th>Date of Birth</th>
<th>Martial Status</th>
</tr>
<tr ng-repeat= "profile in profiles">
<td>{{profile.name}}</td>
<td>{{profile.date_of_birth}}</td>
<td>{{profile.marital_status}}</td>
</tr>
</table>
What I want is to ng-repeat the keys or table heading too. I know how to put ng-repeat and get keys and values. But what I will like is to change the keys and make them look nice, for e.g : date_of_birth should be Date of Birth, but with ng-repeat on it.
I do agree with the comments in under your question that it is not the best approach. Also, remember that in reality you shouldn't count on a particular order when iterating over object's params (see https://github.com/angular/angular.js/issues/6210).
However ;) in the spirit of solving interesting question…
If you really want to do this, you can do it this way:
<table>
<tr ng-repeat="(key, value) in profiles[0]">
<th>{{ key | snailToHuman }}</th>
</tr>
<tr ng-repeat= "profile in profiles">
<td>{{profile.name}}</td>
<td>{{profile.date_of_birth}}</td>
<td>{{profile.martial_status}}</td>
</tr>
</table>
And create a filter snailToHuman, e.g.:
app.filter('snailToHuman', function () {
return function (snail) {
return snail.split('_').map(function (word) {
word.charAt(0).toUpperCase() + word.slice(1);
}).join(' ');
};
})
Below is my code:
post.json
[
{
"client_id":"100",
"client_name":"MM Hope House",
"user_fname":"Betty",
"user_lname":"Johnson",
"user_id":"10",
"username":"bjohnson",
"total_web":"$500",
"campaigns":{
"campaign":[{
"id":"23",
"campaign_name":"MM Hope House",
"start_date":"4/15/2015",
"end_date":"6/13/2015",
"goal":"$20,000",
"total_pledges":"$1550",
"total_donations":"$1000"
}],
"pledgees":[{
"pledgee_fname":"Tavonia",
"pledgee_lname":"Evans",
"pledge_email":"tavonia#gmail.com",
"pledge_date":"4/22/2015",
"pledge_amount":"$50.00",
"paid":"$50.00",
"last_pledge":"$50.00"
}],
"donors":[{
"donor_fname":"Pat",
"donor_lname":"Smith",
"donor_email":"patsmith#onlinemediainteractive.com",
"total_cdonation":"$10.00",
"total_ldonation":"$450.00",
"last_donation":"$200.00",
"last_pledge":"$350.00"
}]
}
}
]
My HTML code:
<script>
function PostsCtrlAjax($scope, $http) {
$http({method: 'POST', url: 'assets/js/posts.json'})
.success(function(data) {
console.log(data);
$scope.posts = data;
})
.error(function(data, status) {
$scope.posts = data || "Request failed";
});
}
</script>
My HTML code where I want to populate data:
<thead>
<tr>
<th>Campaign ID</th>
<th>First Name</th>
<th>Last Name</th>
<th>Amount</th>
<th>Email ID.</th>
<th>Pledge Date</th>
</tr>
</thead>
<tbody>
<tr ng-repeat="post in posts" >
<td>{{post.id}}</td>
<td>{{post.pledgee_fname}}</td>
<td>{{post.pledgee_lname}}</td>
<td>{{post.pledge_amount}}</td>
<td>{{post.pledge_email}}</td>
<td>{{post.pledge_date}}</td>
I am trying to get client_id pleg_fname from array, but do not know how to.
Your pledgess object is an array of objects so you should do this instead and your entire JSON is contained within an array so you need the first element which will be your entire object and you call it with posts[0] and then you specify the object you are trying to iterate : pledgees.
<tr ng-repeat="post in posts[0].campaigns.pledgees" >
<td>{{posts[0].campaigns.campaign[0].id}}</td>
<td>{{post.pledgee_fname}}</td>
<td>{{post.pledgee_lname}}</td>
<td>{{post.pledge_amount}}</td>
<td>{{post.pledge_email}}</td>
<td>{{post.pledge_date}}</td>
Edit
You're right, I totally missed that array. See this plunker where I tested it http://plnkr.co/edit/dvdnjv2mN2gljQGI9Lls?p=preview
Edit 2
If you want the campaign ID just add this (updated the original code with this change)
{{posts[0].campaigns.campaign[0].id}}
Because of your posts object contains an array of one element, you should use posts[0] to get the first (and the only one) element. Moreover, your pledgees array is inside a campaigns object, so posts[0] become posts[0].compaigns.pledgees.
You should try this :
<tr ng-repeat="post in posts[0].campaigns.pledgees" >
<td>{{post.id}}</td>
<td>{{post.pledgee_fname}}</td>
<td>{{post.pledgee_lname}}</td>
<td>{{post.pledge_amount}}</td>
<td>{{post.pledge_email}}</td>
<td>{{post.pledge_date}}</td>
</tr>
EDIT:
And, if you want the id from the campagin object at the same index than your pledgee item, you have to add track by $index to posts[0].campaigns.pledgees. So it's become posts[0].campaigns.pledgees track by $index.
So, now with $index you get the right index to get the right campaign ID in the campaign object with {{posts[0].campaigns.campaign[$index].id}}
And the result is :
<tr ng-repeat="post in posts[0].campaigns.pledgees track by $index" >
<td>{{posts[0].campaigns.campaign[$index].id}}</td>
<td>{{post.pledgee_fname}}</td>
<td>{{post.pledgee_lname}}</td>
<td>{{post.pledge_amount}}</td>
<td>{{post.pledge_email}}</td>
<td>{{post.pledge_date}}</td>
</tr>
You can see the result here : http://jsfiddle.net/Fieldset/y1asxm61/1/