$scope does not return any value - javascript

I am trying to access $scope variable inside my controller . when I console my $scope it shows number of values but when I try to access it via $scope. it return undefined.
I have attached screen shot of $scope
Here you can see it have $id, $parent , templateUrl but when i am trying to access it via $scope.id , $scope.parent , $scope.templateUrl it return undefined .
Edited :
I am trying to access template url . actually I want to attach some params with template url so that I can get them in my backend function
here is my code :
brainframeApp.config(
['$interpolateProvider', '$locationProvider', '$httpProvider', '$routeProvider',
function($interpolateProvider, $locationProvider, $httpProvider,
$routeProvider) {
//configuring angularjs symbos to not to conflict with Django template symbols
$interpolateProvider.startSymbol('{$');
$interpolateProvider.endSymbol('$}');
//$locationProvider.html5Mode(true).hashPrefix('!');
// setup CSRF support
$httpProvider.defaults.xsrfCookieName = 'csrftoken';
$httpProvider.defaults.xsrfHeaderName = 'X-CSRFToken';
console.log("TestDavy: App");
//The route provider
$routeProvider.
when('/', {
templateUrl: '/static/engine/partials/listbrainframes.html',
controller: 'brainframeCtrl'
}).
when('/brainframe/', {
templateUrl: '/views/post.html',
controller: 'brainframeCtrlx'
}).
when('/brainframe/:id', {
templateUrl: '/views/post.html',
controller: 'brainframeCtrlx'
}).
otherwise({
redirectTo: '/'
});
}]);
my controller :
brainframeAppControllers.controller('brainframeCtrlx',
['$scope', '$routeParams', function($scope, $routeParams) {
//console.log($scope.parent);
//$scope.templateUrl = 'views/post.html?id='+$routeParams.id;
//console.log($scope);
$scope.templateUrl = 'views/post.html?id='+$routeParams.id;
//console.log($scope.templateUrl);
}]);

When I put console.log on $scope, am able to see only these properties:
["$$childTail", "$$childHead", "$$nextSibling", "$$watchers", "$$listeners", "$$listenerCount", "$id", "$$ChildScope", "$parent", "$$prevSibling"]
If you want to access the template URL inside your controller:
brainframeApp.run(function($rootScope) {
$rootScope.$on( "$routeChangeStart", function(event, next, current) {
$rootScope.templateUrl = next.$$route.templateUrl;
});
});
Now inside your controller, inject $rootScope and get the template URL
$rootScope.templateUrl

Related

How can I pass a $scope variable as part of component's templateUrl in angularJs 1.5?

I have the following code:
var myModule = angular.module('myModule', []);
myModule.controller('newController', ['$scope', function($scope) {
$scope.id = '1234';
}])
.component('myModalX', {
templateUrl: `./partials/locationY?id=${$scope.id}`,
controller: 'newController',
controllerAs: 'vm'
});
This doesn't work. How can I ensure that I can pass $scope.id as part of the templateUrl?
Update: I figured out how to do it.
I created a service that has a setter method that accepts the scope I need as a parameter, and a getter method that accesses the set variable in the service.
This way I'm able to access the variable in scope using the getter method in the service.
myModule.controller('newController', ['$scope', 'myScopeAcessingService', function($scope, myScopeAcessingService) {
$scope.id = '1234';
myScopeAcessingService.setValue($scope);
}])
.component('myModalX', {
templateUrl: function(myScopeAcessingService) {
const theIdIneed = myScopeAcessingService.getValue();
return `./partials/locationY?id=${theIdIneed}`
},
controller: 'newController',
controllerAs: 'vm'
});

Dynamically changing routes using AngularJS

I have bunch of JSON models in my project and I need to show different models depends on user's actions.
Here is Angular router code:
app.config(['$routeProvider',
function($routeProvider) {
$routeProvider
.when('/', {
templateUrl: 'views/home.html',
controller: 'HomeCtrl'
}).when('/doc/:section, {
templateUrl: 'views/doc.html',
controller: 'DocCtrl'
})
.otherwise({
redirectTo: '/'
});
}]);
And here is DocCtrl.js file:
app.controller('DocCtrl', ['$scope', '$http', 'JSONModelsService',
function ($scope, $http, JSONModelsService) {
var formData = {};
$scope.group = {};
$scope.sections = [];
JSONModelsService.get([section])
.then(function (response) {
console.log(response);
$scope.group = response.data.groups[0];
$scope.sections = $scope.group.sections;
});
}]);
I basically need to make section dynamic so I can show different models in my views. However, I'm confused how I can do it. I just have a folder called JSONModels with multiple json files.
If I understand your question correctly, you are aiming at replacing the [section] part of your code with an actual section identifier?
When a user visits your /doc/:section route, e.g. /doc/my-doc you can access the :section part by injecting the $routeParams service into your controller.
app.controller('DocCtrl', ['$scope', '$http', '$routeParams', 'JSONModelsService',
function ($scope, $http, $routeParams, JSONModelsService) {
...
Using the $routeParams service, you have access to your route parameters. So you can simple access the :section parameter, by reading it off $routeParams.section.
A full example (of what I think you're trying to achieve):
app.controller('DocCtrl', ['$scope', '$http', '$routeParams', 'JSONModelsService',
function ($scope, $http, $routeParams, JSONModelsService) {
var formData = {};
$scope.group = {};
$scope.sections = [];
JSONModelsService.get([$routeParams.section])
.then(function (response) {
console.log(response);
$scope.group = response.data.groups[0];
$scope.sections = $scope.group.sections;
});
}]);
If you would like to know more, take a look at step 7 of the angular tutorial: https://docs.angularjs.org/tutorial/step_07

AngularJS controller called every time after ngRoute url is clicked

I have problem with below code. When I go to main controller url #/, Angular naturally calls main controller - it execute AJAX request. Problem is, that when I click #/some-url, and then #/ url again, this AJAX request is executed again, which is not desired and unnecessary due to performance. I thought controllers are called only once, but it doesn't look like this is the case, at least with ngRoute.
angular.module('robotsApp', ['ngRoute', 'controllers'])
.config(['$routeProvider', function($routeProvider){
var root = '/static/js/partials/';
$routeProvider.
when('/', {
templateUrl: root + 'main.html',
controller: 'main as main'
}).
when('/some-url', {
templateUrl: root + 'some_template.html',
controller: 'someController'
}).
otherwise({
redirectTo: '/'
});
}]);
angular.module('controllers', [])
.controller('main', ['$http', function($http){
$http.get('/user/recent-gain-loss').success(function(data){
this.recent_gain_loss = data;
}.bind(this));
}]);
<p>{{ main.recent_gain_loss }}</p>
Save the data in to a value and then check if the data are already set.
angular.module('values', [])
.value('recentGainLoss', {})
angular.module('controllers', ['values'])
.controller('main', ['$http', 'recentGainLoss', function($http, recentGainLoss){
if (Object.keys(recentGainLoss).length < 1) {
$http.get('/user/recent-gain-loss').success(function(data){
recentGainLoss = angular.extend(recentGainLoss, data);
});
}
this.recent_gain_loss = recentGainLoss;
}]);

Angularjs - inject controller dependency automatically in $scope

Is there a way to inject automatically a dependency (or a resolve) in the $scope without manually append it to $scope ?
(with or without UI-Router)
Would the "controllerAs" syntax be of any help ?
.config(['$stateProvider',
function($stateProvider) {
$stateProvider
.state('test', {
url: '/test',
templateUrl: 'test.tpl.html',
controller: 'TestCtrl',
})
;
}
])
.controller('TestCtrl', ['$scope', 'myService',
function($scope, $rootScope, accruals, myService) {
$scope.myService= myService; // how can I avoid this every time ?
}
])
Thanks

Angularjs : $locationProvider.hashPrefix("!") ;

I want to show url as "www.test.com/!#" for that i am using $locationProvider.hashPrefix("!") ; but it shows url as "www.test.com/#!" . i want "!" before hash not after hash.
Thanks
var app = angular.module('app', []);
app.config(function ($routeProvider, $locationProvider) {
$locationProvider.html5Mode(false);
$locationProvider.hashPrefix("!");
$routeProvider.when('/', {
templateUrl: "app.html",
controller: "AppCtrl"
}
)
.when('/Program', {
templateUrl: "detail1.html",
controller: "Redirect"
})
.when('/Program/123456/channel/78458585',
{
templateUrl: "details.html",
controller: "Detail"
});
});
app.controller("AppCtrl", function ($scope) {
});
app.controller("Detail", function ($scope, $location) {
});
app.controller("Redirect", function ($scope, $location) {
$location.path("/Program/123456/channel/78458585")
});
If you want a ! in the URL before the fragment identifier begins, then you need to put it in the URL to start with and not try to do it with Angular.
http://www.example.com/#foo and http://www.example.com/#!foo are different parts of the same page.
But http://www.example.com/#foo and http://www.example.com/!#foo are different pages altogether.

Categories

Resources