I've configured my server responses to include Cache-Control: max-age=<some number> on several endpoints. I'm using Axios on the front end to make AJAX requests on these endpoints. When I refresh the page a few requests are properly pulled from the browser cache but two of them always go to the server again.
It's always the same two requests which refuse to pull from the cache.
I checked the browser cache and the responses are indeed cached.
Axios adds max-age=0 in the headers of the two problematic requests but not the other three and if I add a custom header to the Axios request:
let payload = {params: {cik: 999}, headers: {'Cache-Control': 'max-age=9999'}};
axios.get('/api/13f-holdings/filer/historical', payload).then((resp) => {
// handle response
});
The request goes through with the following Cache-Control headers:
Cache-Control: max-age=9999, max-age=0
and it ignores the cached data again.
Given that the responses in question are in fact being cached by the browser it seems that the problem lies in the Axios request. But the requests hitting the cache look exactly the same as the requests missing the cache. Let me know if I can provide any additional information to help diagnose this.
Edit: I'm using VueJS. I noticed that the two requests that never hit the browser cache are fired after the Vue component has mounted. Is this significant? Does Vue not have access to the browser cache immediately following component mounting?
This behaviour has to do with the way browser developers choose to load data when a page is refreshed and is, to great extent, out of the hands of the website developer.
If one is concerned that the request is not being cached according to the server's Cache-Control response headers one may paste the request URI in the address bar of a new tab and verify that the page is loaded from the browser cache.
See this question for a detailed explanation:
Why do AJAX GET requests sent from the mounted hook in Vue.js always ignore the browser cache?
I am building a web API. I found whenever I use Chrome to POST, GET to my API, there is always an OPTIONS request sent before the real request, which is quite annoying. Currently, I get the server to ignore any OPTIONS requests. Now my question is what's good to send an OPTIONS request to double the server's load? Is there any way to completely stop the browser from sending OPTIONS requests?
edit 2018-09-13: added some precisions about this pre-flight request and how to avoid it at the end of this reponse.
OPTIONS requests are what we call pre-flight requests in Cross-origin resource sharing (CORS).
They are necessary when you're making requests across different origins in specific situations.
This pre-flight request is made by some browsers as a safety measure to ensure that the request being done is trusted by the server.
Meaning the server understands that the method, origin and headers being sent on the request are safe to act upon.
Your server should not ignore but handle these requests whenever you're attempting to do cross origin requests.
A good resource can be found here http://enable-cors.org/
A way to handle these to get comfortable is to ensure that for any path with OPTIONS method the server sends a response with this header
Access-Control-Allow-Origin: *
This will tell the browser that the server is willing to answer requests from any origin.
For more information on how to add CORS support to your server see the following flowchart
http://www.html5rocks.com/static/images/cors_server_flowchart.png
edit 2018-09-13
CORS OPTIONS request is triggered only in somes cases, as explained in MDN docs:
Some requests don’t trigger a CORS preflight. Those are called “simple requests” in this article, though the Fetch spec (which defines CORS) doesn’t use that term. A request that doesn’t trigger a CORS preflight—a so-called “simple request”—is one that meets all the following conditions:
The only allowed methods are:
GET
HEAD
POST
Apart from the headers set automatically by the user agent (for example, Connection, User-Agent, or any of the other headers with names defined in the Fetch spec as a “forbidden header name”), the only headers which are allowed to be manually set are those which the Fetch spec defines as being a “CORS-safelisted request-header”, which are:
Accept
Accept-Language
Content-Language
Content-Type (but note the additional requirements below)
DPR
Downlink
Save-Data
Viewport-Width
Width
The only allowed values for the Content-Type header are:
application/x-www-form-urlencoded
multipart/form-data
text/plain
No event listeners are registered on any XMLHttpRequestUpload object used in the request; these are accessed using the XMLHttpRequest.upload property.
No ReadableStream object is used in the request.
Have gone through this issue, below is my conclusion to this issue and my solution.
According to the CORS strategy (highly recommend you read about it) You can't just force the browser to stop sending OPTIONS request if it thinks it needs to.
There are two ways you can work around it:
Make sure your request is a "simple request"
Set Access-Control-Max-Age for the OPTIONS request
Simple request
A simple cross-site request is one that meets all the following conditions:
The only allowed methods are:
GET
HEAD
POST
Apart from the headers set automatically by the user agent (e.g. Connection, User-Agent, etc.), the only headers which are allowed to be manually set are:
Accept
Accept-Language
Content-Language
Content-Type
The only allowed values for the Content-Type header are:
application/x-www-form-urlencoded
multipart/form-data
text/plain
A simple request will not cause a pre-flight OPTIONS request.
Set a cache for the OPTIONS check
You can set a Access-Control-Max-Age for the OPTIONS request, so that it will not check the permission again until it is expired.
Access-Control-Max-Age gives the value in seconds for how long the response to the preflight request can be cached for without sending another preflight request.
Limitation Noted
For Chrome, the maximum seconds for Access-Control-Max-Age is 600 which is 10 minutes, according to chrome source code
Access-Control-Max-Age only works for one resource every time, for example, GET requests with same URL path but different queries will be treated as different resources. So the request to the second resource will still trigger a preflight request.
Please refer this answer on the actual need for pre-flighted OPTIONS request: CORS - What is the motivation behind introducing preflight requests?
To disable the OPTIONS request, below conditions must be satisfied for ajax request:
Request does not set custom HTTP headers like 'application/xml' or 'application/json' etc
The request method has to be one of GET, HEAD or POST. If POST, content type should be one of application/x-www-form-urlencoded, multipart/form-data, or text/plain
Reference:
https://developer.mozilla.org/en-US/docs/Web/HTTP/Access_control_CORS
When you have the debug console open and the Disable Cache option turned on, preflight requests will always be sent (i.e. before each and every request). if you don't disable the cache, a pre-flight request will be sent only once (per server)
Yes it's possible to avoid options request. Options request is a preflight request when you send (post) any data to another domain. It's a browser security issue. But we can use another technology: iframe transport layer. I strongly recommend you forget about any CORS configuration and use readymade solution and it will work anywhere.
Take a look here:
https://github.com/jpillora/xdomain
And working example:
http://jpillora.com/xdomain/
For a developer who understands the reason it exists but needs to access an API that doesn't handle OPTIONS calls without auth, I need a temporary answer so I can develop locally until the API owner adds proper SPA CORS support or I get a proxy API up and running.
I found you can disable CORS in Safari and Chrome on a Mac.
Disable same origin policy in Chrome
Chrome: Quit Chrome, open an terminal and paste this command: open /Applications/Google\ Chrome.app --args --disable-web-security --user-data-dir
Safari: Disabling same-origin policy in Safari
If you want to disable the same-origin policy on Safari (I have 9.1.1), then you only need to enable the developer menu, and select "Disable Cross-Origin Restrictions" from the develop menu.
As mentioned in previous posts already, OPTIONS requests are there for a reason. If you have an issue with large response times from your server (e.g. overseas connection) you can also have your browser cache the preflight requests.
Have your server reply with the Access-Control-Max-Age header and for requests that go to the same endpoint the preflight request will have been cached and not occur anymore.
I have solved this problem like.
if($_SERVER['REQUEST_METHOD'] == 'OPTIONS' && ENV == 'devel') {
header('Access-Control-Allow-Origin: *');
header('Access-Control-Allow-Headers: X-Requested-With');
header("HTTP/1.1 200 OK");
die();
}
It is only for development. With this I am waiting 9ms and 500ms and not 8s and 500ms. I can do that because production JS app will be on the same machine as production so there will be no OPTIONS but development is my local.
You can't but you could avoid CORS using JSONP.
After spending a whole day and a half trying to work through a similar problem I found it had to do with IIS.
My Web API project was set up as follows:
// WebApiConfig.cs
public static void Register(HttpConfiguration config)
{
var cors = new EnableCorsAttribute("*", "*", "*");
config.EnableCors(cors);
//...
}
I did not have CORS specific config options in the web.config > system.webServer node like I have seen in so many posts
No CORS specific code in the global.asax or in the controller as a decorator
The problem was the app pool settings.
The managed pipeline mode was set to classic (changed it to integrated) and the Identity was set to Network Service (changed it to ApplicationPoolIdentity)
Changing those settings (and refreshing the app pool) fixed it for me.
OPTIONS request is a feature of web browsers, so it's not easy to disable it. But I found a way to redirect it away with proxy. It's useful in case that the service endpoint just cannot handle CORS/OPTIONS yet, maybe still under development, or mal-configured.
Steps:
Setup a reverse proxy for such requests with tools of choice (nginx, YARP, ...)
Create an endpoint just to handle the OPTIONS request. It might be easier to create a normal empty endpoint, and make sure it handles CORS well.
Configure two sets of rules for the proxy. One is to route all OPTIONS requests to the dummy endpoint above. Another to route all other requests to actual endpoint in question.
Update the web site to use proxy instead.
Basically this approach is to cheat browser that OPTIONS request works. Considering CORS is not to enhance security, but to relax the same-origin policy, I hope this trick could work for a while. :)
you can also use a API Manager (like Open Sources Gravitee.io) to prevent CORS issues between frontend app and backend services by manipulating headers in preflight.
Header used in response to a preflight request to indicate which HTTP headers can be used when making the actual request :
content-type
access-control-allow-header
authorization
x-requested-with
and specify the "allow-origin" = localhost:4200 for example
One solution I have used in the past - lets say your site is on mydomain.com, and you need to make an ajax request to foreigndomain.com
Configure an IIS rewrite from your domain to the foreign domain - e.g.
<rewrite>
<rules>
<rule name="ForeignRewrite" stopProcessing="true">
<match url="^api/v1/(.*)$" />
<action type="Rewrite" url="https://foreigndomain.com/{R:1}" />
</rule>
</rules>
</rewrite>
on your mydomain.com site - you can then make a same origin request, and there's no need for any options request :)
It can be solved in case of use of a proxy that intercept the request and write the appropriate headers.
In the particular case of Varnish these would be the rules:
if (req.http.host == "CUSTOM_URL" ) {
set resp.http.Access-Control-Allow-Origin = "*";
if (req.method == "OPTIONS") {
set resp.http.Access-Control-Max-Age = "1728000";
set resp.http.Access-Control-Allow-Methods = "GET, POST, PUT, DELETE, PATCH, OPTIONS";
set resp.http.Access-Control-Allow-Headers = "Authorization,Content-Type,Accept,Origin,User-Agent,DNT,Cache-Control,X-Mx-ReqToken,Keep-Alive,X-Requested-With,If-Modified-Since";
set resp.http.Content-Length = "0";
set resp.http.Content-Type = "text/plain charset=UTF-8";
set resp.status = 204;
}
}
What worked for me was to import "github.com/gorilla/handlers" and then use it this way:
router := mux.NewRouter()
router.HandleFunc("/config", getConfig).Methods("GET")
router.HandleFunc("/config/emcServer", createEmcServers).Methods("POST")
headersOk := handlers.AllowedHeaders([]string{"X-Requested-With", "Content-Type"})
originsOk := handlers.AllowedOrigins([]string{"*"})
methodsOk := handlers.AllowedMethods([]string{"GET", "HEAD", "POST", "PUT", "OPTIONS"})
log.Fatal(http.ListenAndServe(":" + webServicePort, handlers.CORS(originsOk, headersOk, methodsOk)(router)))
As soon as I executed an Ajax POST request and attaching JSON data to it, Chrome would always add the Content-Type header which was not in my previous AllowedHeaders config.
I am trying to make a cors PUT request using the vanilla Fetch API
When I click my button to send the PUT request, the method on the first request is OPTIONS. It is only when I click the button again, then the method on the request changes to PUT. Why?
I understand this is part of the CORS preflight, but is there a way to trigger the preflight manually so the OPTIONS response can be cached?
Could this behavior be indicative of a failing promise somewhere?
See the Fetch Standard, section 4.7. CORS-preflight fetch.
Note: This is effectively the user agent implementation of the check to see if the CORS protocol is understood. The so-called CORS-preflight request. If successful it populates the CORS-preflight cache to minimize the number of these fetches.
at steps 1 through 7; also 4.8. CORS-preflight cache.
I have a site that sends XMLHTTPRequests to a php file that handles the HTTP POST Request and returns data in JSON format. The urls for the post_requests files are public information (since a user can just view the JS code for a page and find the URLs I'm sending HTTP requests to)
I mainly handle HTTP Post Requests in PHP by doing this:
//First verify XMLHTTPRequest, then get the post data
if (isset($_SERVER['HTTP_X_REQUESTED_WITH']) && strtolower($_SERVER['HTTP_X_REQUESTED_WITH']) === 'xmlhttprequest')
{
$request = file_get_contents('php://input');
$data = json_decode($request);
//Do stuff with the data
}
Unfortunately, I'm fairly sure that the headers can be spoofed and some devious user or click bot can just spam my post requests, repeatedly querying my database until either my site goes down or they go down fighting.
I'm not sure if their requests will play a HUGE role in the freezing the server with their requests (as 20 requests per second isn't that much). Should I be doing something about this? (especially in the case of a DDOS attack). I've heard of rate-limiting where you record an instance of every time some IP requests data and then trace if they are spammy in nature:
INSERT INTO logs (ip_address, page, date) values ('$ip', '$page', NOW())
//And then every time someone loads the php post request, check to see if they loaded the same one in the past second or 10 seconds
But that means every time there's a request by a normal user, I have to expend resources to log them. Is there a standard or better "practice" (maybe some server configuration?) for preventing or dealing with his concern?
Edit: Just for clarification. I'm referring to some person coding a software (with a cookie or is logged in) that just sends millions of requests per second to all my PHP post request files on my site.
The solution for this is to rate-limit requests, usually per client IP.
Most webservers have modules which can do this, so use one of them - that way your application only receives requests it's suppsed to handle.
nginx: ngx_http_limit_req
Apache: mod_evasive
There are many things you can do:
Use tokens to authenticate request. Save token in session and allow only some amount of requests per token (eg. 20). Also make tokens expire after some amount of time (eg. 5 min). The exact values depend on your site usage patterns. This of course will not stop attacker, as he may refresh the site and grab new token, but it is a small and almost costless aggravation.
Once you have tokens, require captcha after several token refresh requests. Also adjust it to your usage patterns to avoid displaying captcha to regular users.
Adjust your server's firewall rules. Use iptables connlimit and recent modules (see http://ipset.netfilter.org/iptables-extensions.man.html). This will reduce request ratio handled by your http server, so it will be harder to exhaust resources.