The spec has a context.measureText(text) function that will tell you how much width it would require to print that text, but I can't find a way to find out how tall it is. I know it's based on the font, but I don't know to convert a font string to a text height.
Browsers are beginning to support advanced text metrics, which will make this task trivial when it's widely supported:
let metrics = ctx.measureText(text);
let fontHeight = metrics.fontBoundingBoxAscent + metrics.fontBoundingBoxDescent;
let actualHeight = metrics.actualBoundingBoxAscent + metrics.actualBoundingBoxDescent;
fontHeight gets you the bounding box height that is constant regardless of the string being rendered. actualHeight is specific to the string being rendered.
Spec: https://www.w3.org/TR/2012/CR-2dcontext-20121217/#dom-textmetrics-fontboundingboxascent and the sections just below it.
Support status (20-Aug-2017):
Chrome has it behind a flag (https://bugs.chromium.org/p/chromium/issues/detail?id=277215).
Firefox has it in development (https://bugzilla.mozilla.org/show_bug.cgi?id=1102584).
Edge has no support (https://wpdev.uservoice.com/forums/257854-microsoft-edge-developer/suggestions/30922861-advanced-canvas-textmetrics).
node-canvas (node.js module), mostly supported (https://github.com/Automattic/node-canvas/wiki/Compatibility-Status).
UPDATE - for an example of this working, I used this technique in the Carota editor.
Following on from ellisbben's answer, here is an enhanced version to get the ascent and descent from the baseline, i.e. same as tmAscent and tmDescent returned by Win32's GetTextMetric API. This is needed if you want to do a word-wrapped run of text with spans in different fonts/sizes.
The above image was generated on a canvas in Safari, red being the top line where the canvas was told to draw the text, green being the baseline and blue being the bottom (so red to blue is the full height).
Using jQuery for succinctness:
var getTextHeight = function(font) {
var text = $('<span>Hg</span>').css({ fontFamily: font });
var block = $('<div style="display: inline-block; width: 1px; height: 0px;"></div>');
var div = $('<div></div>');
div.append(text, block);
var body = $('body');
body.append(div);
try {
var result = {};
block.css({ verticalAlign: 'baseline' });
result.ascent = block.offset().top - text.offset().top;
block.css({ verticalAlign: 'bottom' });
result.height = block.offset().top - text.offset().top;
result.descent = result.height - result.ascent;
} finally {
div.remove();
}
return result;
};
In addition to a text element, I add a div with display: inline-block so I can set its vertical-align style, and then find out where the browser has put it.
So you get back an object with ascent, descent and height (which is just ascent + descent for convenience). To test it, it's worth having a function that draws a horizontal line:
var testLine = function(ctx, x, y, len, style) {
ctx.strokeStyle = style;
ctx.beginPath();
ctx.moveTo(x, y);
ctx.lineTo(x + len, y);
ctx.closePath();
ctx.stroke();
};
Then you can see how the text is positioned on the canvas relative to the top, baseline and bottom:
var font = '36pt Times';
var message = 'Big Text';
ctx.fillStyle = 'black';
ctx.textAlign = 'left';
ctx.textBaseline = 'top'; // important!
ctx.font = font;
ctx.fillText(message, x, y);
// Canvas can tell us the width
var w = ctx.measureText(message).width;
// New function gets the other info we need
var h = getTextHeight(font);
testLine(ctx, x, y, w, 'red');
testLine(ctx, x, y + h.ascent, w, 'green');
testLine(ctx, x, y + h.height, w, 'blue');
You can get a very close approximation of the vertical height by checking the length of a capital M.
ctx.font = 'bold 10px Arial';
lineHeight = ctx.measureText('M').width;
The canvas spec doesn't give us a method for measuring the height of a string. However, you can set the size of your text in pixels and you can usually figure out what the vertical bounds are relatively easily.
If you need something more precise then you could throw text onto the canvas and then get pixel data and figure out how many pixels are used vertically. This would be relatively simple, but not very efficient. You could do something like this (it works, but draws some text onto your canvas that you would want to remove):
function measureTextHeight(ctx, left, top, width, height) {
// Draw the text in the specified area
ctx.save();
ctx.translate(left, top + Math.round(height * 0.8));
ctx.mozDrawText('gM'); // This seems like tall text... Doesn't it?
ctx.restore();
// Get the pixel data from the canvas
var data = ctx.getImageData(left, top, width, height).data,
first = false,
last = false,
r = height,
c = 0;
// Find the last line with a non-white pixel
while(!last && r) {
r--;
for(c = 0; c < width; c++) {
if(data[r * width * 4 + c * 4 + 3]) {
last = r;
break;
}
}
}
// Find the first line with a non-white pixel
while(r) {
r--;
for(c = 0; c < width; c++) {
if(data[r * width * 4 + c * 4 + 3]) {
first = r;
break;
}
}
// If we've got it then return the height
if(first != r) return last - first;
}
// We screwed something up... What do you expect from free code?
return 0;
}
// Set the font
context.mozTextStyle = '32px Arial';
// Specify a context and a rect that is safe to draw in when calling measureTextHeight
var height = measureTextHeight(context, 0, 0, 50, 50);
console.log(height);
For Bespin they do fake a height by measuring the width of a lowercase 'm'... I don't know how this is used, and I would not recommend this method. Here is the relevant Bespin method:
var fixCanvas = function(ctx) {
// upgrade Firefox 3.0.x text rendering to HTML 5 standard
if (!ctx.fillText && ctx.mozDrawText) {
ctx.fillText = function(textToDraw, x, y, maxWidth) {
ctx.translate(x, y);
ctx.mozTextStyle = ctx.font;
ctx.mozDrawText(textToDraw);
ctx.translate(-x, -y);
}
}
if (!ctx.measureText && ctx.mozMeasureText) {
ctx.measureText = function(text) {
ctx.mozTextStyle = ctx.font;
var width = ctx.mozMeasureText(text);
return { width: width };
}
}
if (ctx.measureText && !ctx.html5MeasureText) {
ctx.html5MeasureText = ctx.measureText;
ctx.measureText = function(text) {
var textMetrics = ctx.html5MeasureText(text);
// fake it 'til you make it
textMetrics.ascent = ctx.html5MeasureText("m").width;
return textMetrics;
}
}
// for other browsers
if (!ctx.fillText) {
ctx.fillText = function() {}
}
if (!ctx.measureText) {
ctx.measureText = function() { return 10; }
}
};
EDIT: Are you using canvas transforms? If so, you'll have to track the transformation matrix. The following method should measure the height of text with the initial transform.
EDIT #2: Oddly the code below does not produce correct answers when I run it on this StackOverflow page; it's entirely possible that the presence of some style rules could break this function.
The canvas uses fonts as defined by CSS, so in theory we can just add an appropriately styled chunk of text to the document and measure its height. I think this is significantly easier than rendering text and then checking pixel data and it should also respect ascenders and descenders. Check out the following:
var determineFontHeight = function(fontStyle) {
var body = document.getElementsByTagName("body")[0];
var dummy = document.createElement("div");
var dummyText = document.createTextNode("M");
dummy.appendChild(dummyText);
dummy.setAttribute("style", fontStyle);
body.appendChild(dummy);
var result = dummy.offsetHeight;
body.removeChild(dummy);
return result;
};
//A little test...
var exampleFamilies = ["Helvetica", "Verdana", "Times New Roman", "Courier New"];
var exampleSizes = [8, 10, 12, 16, 24, 36, 48, 96];
for(var i = 0; i < exampleFamilies.length; i++) {
var family = exampleFamilies[i];
for(var j = 0; j < exampleSizes.length; j++) {
var size = exampleSizes[j] + "pt";
var style = "font-family: " + family + "; font-size: " + size + ";";
var pixelHeight = determineFontHeight(style);
console.log(family + " " + size + " ==> " + pixelHeight + " pixels high.");
}
}
You'll have to make sure you get the font style correct on the DOM element that you measure the height of but that's pretty straightforward; really you should use something like
var canvas = /* ... */
var context = canvas.getContext("2d");
var canvasFont = " ... ";
var fontHeight = determineFontHeight("font: " + canvasFont + ";");
context.font = canvasFont;
/*
do your stuff with your font and its height here.
*/
As JJ Stiff suggests, you can add your text to a span and then measure the offsetHeight of the span.
var d = document.createElement("span");
d.font = "20px arial";
d.textContent = "Hello world!";
document.body.appendChild(d);
var emHeight = d.offsetHeight;
document.body.removeChild(d);
As shown on HTML5Rocks
Isn't the height of the text in pixels equal to the font size (in pts) if you define the font using context.font ?
Just to add to Daniel's answer (which is great! and absolutely right!), version without JQuery:
function objOff(obj)
{
var currleft = currtop = 0;
if( obj.offsetParent )
{ do { currleft += obj.offsetLeft; currtop += obj.offsetTop; }
while( obj = obj.offsetParent ); }
else { currleft += obj.offsetLeft; currtop += obj.offsetTop; }
return [currleft,currtop];
}
function FontMetric(fontName,fontSize)
{
var text = document.createElement("span");
text.style.fontFamily = fontName;
text.style.fontSize = fontSize + "px";
text.innerHTML = "ABCjgq|";
// if you will use some weird fonts, like handwriting or symbols, then you need to edit this test string for chars that will have most extreme accend/descend values
var block = document.createElement("div");
block.style.display = "inline-block";
block.style.width = "1px";
block.style.height = "0px";
var div = document.createElement("div");
div.appendChild(text);
div.appendChild(block);
// this test div must be visible otherwise offsetLeft/offsetTop will return 0
// but still let's try to avoid any potential glitches in various browsers
// by making it's height 0px, and overflow hidden
div.style.height = "0px";
div.style.overflow = "hidden";
// I tried without adding it to body - won't work. So we gotta do this one.
document.body.appendChild(div);
block.style.verticalAlign = "baseline";
var bp = objOff(block);
var tp = objOff(text);
var taccent = bp[1] - tp[1];
block.style.verticalAlign = "bottom";
bp = objOff(block);
tp = objOff(text);
var theight = bp[1] - tp[1];
var tdescent = theight - taccent;
// now take it off :-)
document.body.removeChild(div);
// return text accent, descent and total height
return [taccent,theight,tdescent];
}
I've just tested the code above and works great on latest Chrome, FF and Safari on Mac.
EDIT: I have added font size as well and tested with webfont instead of system font - works awesome.
I solved this problem straitforward - using pixel manipulation.
Here is graphical answer:
Here is code:
function textHeight (text, font) {
var fontDraw = document.createElement("canvas");
var height = 100;
var width = 100;
// here we expect that font size will be less canvas geometry
fontDraw.setAttribute("height", height);
fontDraw.setAttribute("width", width);
var ctx = fontDraw.getContext('2d');
// black is default
ctx.fillRect(0, 0, width, height);
ctx.textBaseline = 'top';
ctx.fillStyle = 'white';
ctx.font = font;
ctx.fillText(text/*'Eg'*/, 0, 0);
var pixels = ctx.getImageData(0, 0, width, height).data;
// row numbers where we first find letter end where it ends
var start = -1;
var end = -1;
for (var row = 0; row < height; row++) {
for (var column = 0; column < width; column++) {
var index = (row * width + column) * 4;
// if pixel is not white (background color)
if (pixels[index] == 0) {
// we havent met white (font color) pixel
// on the row and the letters was detected
if (column == width - 1 && start != -1) {
end = row;
row = height;
break;
}
continue;
}
else {
// we find top of letter
if (start == -1) {
start = row;
}
// ..letters body
break;
}
}
}
/*
document.body.appendChild(fontDraw);
fontDraw.style.pixelLeft = 400;
fontDraw.style.pixelTop = 400;
fontDraw.style.position = "absolute";
*/
return end - start;
}
one line answer
var height = parseInt(ctx.font) * 1.2;
CSS "line-height: normal" is between 1 and 1.2
read here for more info
I'm kind of shocked that there are no correct answers here. There is no need to make an estimate or a guess. Also, the font-size is not the actual size of the bounding box of the font. The font height depends on whether you have ascenders and descenders.
To calculate it, use ctx.measureText() and add together the actualBoundingBoxAscent and the actualBoundingBoxDescent. That'll give you the actual size. You can also add together the font* versions to get the size that is used to calculate things like element height, but isn't strictly the height of the actual used space for the font.
const text = 'Hello World';
const canvas = document.querySelector('canvas');
canvas.width = 500;
canvas.height = 200;
const ctx = canvas.getContext('2d');
const fontSize = 100;
ctx.font = `${fontSize}px Arial, Helvetica, sans-serif`;
// top is critical to the fillText() calculation
// you can use other positions, but you need to adjust the calculation
ctx.textBaseline = 'top';
ctx.textAlign = 'center';
const metrics = ctx.measureText(text);
const width = metrics.width;
const actualHeight = metrics.actualBoundingBoxAscent + metrics.actualBoundingBoxDescent;
// fallback to using fontSize if fontBoundingBoxAscent isn't available, like in Firefox. Should be close enough that you aren't more than a pixel off in most cases.
const fontHeight = (metrics.fontBoundingBoxAscent + metrics.fontBoundingBoxDescent) ?? fontSize;
ctx.fillStyle = '#00F'; // blue
ctx.fillRect((canvas.width / 2) - (width / 2), (canvas.height / 2) - (fontHeight / 2), width, fontHeight);
ctx.fillStyle = '#0F0'; // green
ctx.fillRect((canvas.width / 2) - (width / 2), (canvas.height / 2) - (actualHeight / 2), width, actualHeight);
// canvas.height / 2 - actualHeight / 2 gets you to the top of
// the green box. You have to add actualBoundingBoxAscent to shift
// it just right
ctx.fillStyle = '#F00'; // red
ctx.fillText(text, canvas.width / 2, canvas.height / 2 - actualHeight / 2 + metrics.actualBoundingBoxAscent);
<canvas></canvas>
This is what I did based on some of the other answers here:
function measureText(text, font) {
const span = document.createElement('span');
span.appendChild(document.createTextNode(text));
Object.assign(span.style, {
font: font,
margin: '0',
padding: '0',
border: '0',
whiteSpace: 'nowrap'
});
document.body.appendChild(span);
const {width, height} = span.getBoundingClientRect();
span.remove();
return {width, height};
}
var font = "italic 100px Georgia";
var text = "abc this is a test";
console.log(measureText(text, font));
I'm writing a terminal emulator so I needed to draw rectangles around characters.
var size = 10
var lineHeight = 1.2 // CSS "line-height: normal" is between 1 and 1.2
context.font = size+'px/'+lineHeight+'em monospace'
width = context.measureText('m').width
height = size * lineHeight
Obviously if you want the exact amount of space the character takes up, it won't help. But it'll give you a good approximation for certain uses.
I have implemented a nice library for measuring the exact height and width of text using HTML canvas. This should do what you want.
https://github.com/ChrisBellew/text-measurer.js
Here is a simple function. No library needed.
I wrote this function to get the top and bottom bounds relative to baseline. If textBaseline is set to alphabetic. What it does is it creates another canvas, and then draws there, and then finds the top most and bottom most non blank pixel. And that is the top and bottom bounds. It returns it as relative, so if height is 20px, and there is nothing below the baseline, then the top bound is -20.
You must supply characters to it. Otherwise it will give you 0 height and 0 width, obviously.
Usage:
alert(measureHeight('40px serif', 40, 'rg').height)
Here is the function:
function measureHeight(aFont, aSize, aChars, aOptions={}) {
// if you do pass aOptions.ctx, keep in mind that the ctx properties will be changed and not set back. so you should have a devoted canvas for this
// if you dont pass in a width to aOptions, it will return it to you in the return object
// the returned width is Math.ceil'ed
console.error('aChars: "' + aChars + '"');
var defaultOptions = {
width: undefined, // if you specify a width then i wont have to use measureText to get the width
canAndCtx: undefined, // set it to object {can:,ctx:} // if not provided, i will make one
range: 3
};
aOptions.range = aOptions.range || 3; // multiples the aSize by this much
if (aChars === '') {
// no characters, so obviously everything is 0
return {
relativeBot: 0,
relativeTop: 0,
height: 0,
width: 0
};
// otherwise i will get IndexSizeError: Index or size is negative or greater than the allowed amount error somewhere below
}
// validateOptionsObj(aOptions, defaultOptions); // not needed because all defaults are undefined
var can;
var ctx;
if (!aOptions.canAndCtx) {
can = document.createElement('canvas');;
can.mozOpaque = 'true'; // improved performanceo on firefox i guess
ctx = can.getContext('2d');
// can.style.position = 'absolute';
// can.style.zIndex = 10000;
// can.style.left = 0;
// can.style.top = 0;
// document.body.appendChild(can);
} else {
can = aOptions.canAndCtx.can;
ctx = aOptions.canAndCtx.ctx;
}
var w = aOptions.width;
if (!w) {
ctx.textBaseline = 'alphabetic';
ctx.textAlign = 'left';
ctx.font = aFont;
w = ctx.measureText(aChars).width;
}
w = Math.ceil(w); // needed as i use w in the calc for the loop, it needs to be a whole number
// must set width/height, as it wont paint outside of the bounds
can.width = w;
can.height = aSize * aOptions.range;
ctx.font = aFont; // need to set the .font again, because after changing width/height it makes it forget for some reason
ctx.textBaseline = 'alphabetic';
ctx.textAlign = 'left';
ctx.fillStyle = 'white';
console.log('w:', w);
var avgOfRange = (aOptions.range + 1) / 2;
var yBaseline = Math.ceil(aSize * avgOfRange);
console.log('yBaseline:', yBaseline);
ctx.fillText(aChars, 0, yBaseline);
var yEnd = aSize * aOptions.range;
var data = ctx.getImageData(0, 0, w, yEnd).data;
// console.log('data:', data)
var botBound = -1;
var topBound = -1;
// measureHeightY:
for (y=0; y<=yEnd; y++) {
for (var x = 0; x < w; x += 1) {
var n = 4 * (w * y + x);
var r = data[n];
var g = data[n + 1];
var b = data[n + 2];
// var a = data[n + 3];
if (r+g+b > 0) { // non black px found
if (topBound == -1) {
topBound = y;
}
botBound = y; // break measureHeightY; // dont break measureHeightY ever, keep going, we till yEnd. so we get proper height for strings like "`." or ":" or "!"
break;
}
}
}
return {
relativeBot: botBound - yBaseline, // relative to baseline of 0 // bottom most row having non-black
relativeTop: topBound - yBaseline, // relative to baseline of 0 // top most row having non-black
height: (botBound - topBound) + 1,
width: w// EDIT: comma has been added to fix old broken code.
};
}
relativeBot, relativeTop, and height are the useful things in the return object.
Here is example usage:
<!DOCTYPE html>
<html>
<head>
<title>Page Title</title>
<script>
function measureHeight(aFont, aSize, aChars, aOptions={}) {
// if you do pass aOptions.ctx, keep in mind that the ctx properties will be changed and not set back. so you should have a devoted canvas for this
// if you dont pass in a width to aOptions, it will return it to you in the return object
// the returned width is Math.ceil'ed
console.error('aChars: "' + aChars + '"');
var defaultOptions = {
width: undefined, // if you specify a width then i wont have to use measureText to get the width
canAndCtx: undefined, // set it to object {can:,ctx:} // if not provided, i will make one
range: 3
};
aOptions.range = aOptions.range || 3; // multiples the aSize by this much
if (aChars === '') {
// no characters, so obviously everything is 0
return {
relativeBot: 0,
relativeTop: 0,
height: 0,
width: 0
};
// otherwise i will get IndexSizeError: Index or size is negative or greater than the allowed amount error somewhere below
}
// validateOptionsObj(aOptions, defaultOptions); // not needed because all defaults are undefined
var can;
var ctx;
if (!aOptions.canAndCtx) {
can = document.createElement('canvas');;
can.mozOpaque = 'true'; // improved performanceo on firefox i guess
ctx = can.getContext('2d');
// can.style.position = 'absolute';
// can.style.zIndex = 10000;
// can.style.left = 0;
// can.style.top = 0;
// document.body.appendChild(can);
} else {
can = aOptions.canAndCtx.can;
ctx = aOptions.canAndCtx.ctx;
}
var w = aOptions.width;
if (!w) {
ctx.textBaseline = 'alphabetic';
ctx.textAlign = 'left';
ctx.font = aFont;
w = ctx.measureText(aChars).width;
}
w = Math.ceil(w); // needed as i use w in the calc for the loop, it needs to be a whole number
// must set width/height, as it wont paint outside of the bounds
can.width = w;
can.height = aSize * aOptions.range;
ctx.font = aFont; // need to set the .font again, because after changing width/height it makes it forget for some reason
ctx.textBaseline = 'alphabetic';
ctx.textAlign = 'left';
ctx.fillStyle = 'white';
console.log('w:', w);
var avgOfRange = (aOptions.range + 1) / 2;
var yBaseline = Math.ceil(aSize * avgOfRange);
console.log('yBaseline:', yBaseline);
ctx.fillText(aChars, 0, yBaseline);
var yEnd = aSize * aOptions.range;
var data = ctx.getImageData(0, 0, w, yEnd).data;
// console.log('data:', data)
var botBound = -1;
var topBound = -1;
// measureHeightY:
for (y=0; y<=yEnd; y++) {
for (var x = 0; x < w; x += 1) {
var n = 4 * (w * y + x);
var r = data[n];
var g = data[n + 1];
var b = data[n + 2];
// var a = data[n + 3];
if (r+g+b > 0) { // non black px found
if (topBound == -1) {
topBound = y;
}
botBound = y; // break measureHeightY; // dont break measureHeightY ever, keep going, we till yEnd. so we get proper height for strings like "`." or ":" or "!"
break;
}
}
}
return {
relativeBot: botBound - yBaseline, // relative to baseline of 0 // bottom most row having non-black
relativeTop: topBound - yBaseline, // relative to baseline of 0 // top most row having non-black
height: (botBound - topBound) + 1,
width: w
};
}
</script>
</head>
<body style="background-color:steelblue;">
<input type="button" value="reuse can" onClick="alert(measureHeight('40px serif', 40, 'rg', {canAndCtx:{can:document.getElementById('can'), ctx:document.getElementById('can').getContext('2d')}}).height)">
<input type="button" value="dont reuse can" onClick="alert(measureHeight('40px serif', 40, 'rg').height)">
<canvas id="can"></canvas>
<h1>This is a Heading</h1>
<p>This is a paragraph.</p>
</body>
</html>
The relativeBot and relativeTop are what you see in this image here:
https://developer.mozilla.org/en-US/docs/Web/API/Canvas_API/Tutorial/Drawing_text
Funny that TextMetrics has width only and no height:
http://www.whatwg.org/specs/web-apps/current-work/multipage/the-canvas-element.html#textmetrics
Can you use a Span as on this example?
http://mudcu.be/journal/2011/01/html5-typographic-metrics/#alignFix
First of all, you need to set the height of a font size, and then according to the value of the font height to determine the current height of your text is how much, cross-text lines, of course, the same height of the font need to accumulate, if the text does not exceed the largest text box Height, all show, otherwise, only show the text within the box text. High values need your own definition. The larger the preset height, the greater the height of the text that needs to be displayed and intercepted.
After the effect is processed(solve)
Before the effect is processed(
unsolved)
AutoWrappedText.auto_wrap = function(ctx, text, maxWidth, maxHeight) {
var words = text.split("");
var lines = [];
var currentLine = words[0];
var total_height = 0;
for (var i = 1; i < words.length; i++) {
var word = words[i];
var width = ctx.measureText(currentLine + word).width;
if (width < maxWidth) {
currentLine += word;
} else {
lines.push(currentLine);
currentLine = word;
// TODO dynamically get font size
total_height += 25;
if (total_height >= maxHeight) {
break
}
}
}
if (total_height + 25 < maxHeight) {
lines.push(currentLine);
} else {
lines[lines.length - 1] += "…";
}
return lines;};
I found that JUST FOR ARIAL the simplest, fastest and accuratest way to find height of bounding box is to use the width of certain letters. If you plan to use a certain font without letting user to choose one different, you can do a little research to find the right letter that do the job for that font.
<!DOCTYPE html>
<html>
<body>
<canvas id="myCanvas" width="700" height="200" style="border:1px solid #d3d3d3;">
Your browser does not support the HTML5 canvas tag.</canvas>
<script>
var c = document.getElementById("myCanvas");
var ctx = c.getContext("2d");
ctx.font = "100px Arial";
var txt = "Hello guys!"
var Hsup=ctx.measureText("H").width;
var Hbox=ctx.measureText("W").width;
var W=ctx.measureText(txt).width;
var W2=ctx.measureText(txt.substr(0, 9)).width;
ctx.fillText(txt, 10, 100);
ctx.rect(10,100, W, -Hsup);
ctx.rect(10,100+Hbox-Hsup, W2, -Hbox);
ctx.stroke();
</script>
<p><strong>Note:</strong> The canvas tag is not supported in Internet
Explorer 8 and earlier versions.</p>
</body>
</html>
setting the font size might not be practical though, since setting
ctx.font = ''
will use the one defined by CSS as well as any embedded font tags. If you use the CSS font you have no idea what the height is from a programmatic way, using the measureText method, which is very short sighted. On another note though, IE8 DOES return the width and height.
This works 1) for multiline text as well 2) and even in IE9!
<div class="measureText" id="measureText">
</div>
.measureText {
margin: 0;
padding: 0;
border: 0;
font-family: Arial;
position: fixed;
visibility: hidden;
height: auto;
width: auto;
white-space: pre-wrap;
line-height: 100%;
}
function getTextFieldMeasure(fontSize, value) {
const div = document.getElementById("measureText");
// returns wrong result for multiline text with last line empty
let arr = value.split('\n');
if (arr[arr.length-1].length == 0) {
value += '.';
}
div.innerText = value;
div.style['font-size']= fontSize + "px";
let rect = div.getBoundingClientRect();
return {width: rect.width, height: rect.height};
};
I know this is an old answered question, but for future reference I'd like to add a short, minimal, JS-only (no jquery) solution I believe people can benefit from:
var measureTextHeight = function(fontFamily, fontSize)
{
var text = document.createElement('span');
text.style.fontFamily = fontFamily;
text.style.fontSize = fontSize + "px";
text.textContent = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789 ";
document.body.appendChild(text);
var result = text.getBoundingClientRect().height;
document.body.removeChild(text);
return result;
};
I monkey patched CanvasRenderingContext2D.measureText() in one of my project to include actual height of the text. It's written in vanilla JS and has zero dependencies.
/*
* Monkeypatch CanvasRenderingContext2D.measureText() to include actual height of the text
*/
; (function (global) {
"use strict";
var _measureText = global.CanvasRenderingContext2D.prototype.measureText;
global.CanvasRenderingContext2D.prototype.measureText = function () {
var textMetrics = _measureText.apply(this, arguments);
var _getHeight = function (text) {
var $span = global.document.createElement("span");
var spanTextNode = global.document.createTextNode(text);
$span.appendChild(spanTextNode);
$span.setAttribute("style", `font: ${this.font}`);
var $div = global.document.createElement("div");
$div.setAttribute("style", "display: inline-block; width: 1px; height: 0; vertical-align: super;");
var $parentDiv = global.document.createElement("div");
$parentDiv.appendChild($span);
$parentDiv.appendChild($div);
var $body = global.document.getElementsByTagName("body")[0];
$body.appendChild($parentDiv);
var divRect = $div.getBoundingClientRect();
var spanRect = $span.getBoundingClientRect();
var result = {};
$div.style.verticalAlign = "baseline";
result.ascent = divRect.top - spanRect.top;
$div.style.verticalAlign = "bottom";
result.height = divRect.top - spanRect.top;
result.descent = result.height - result.ascent;
$body.removeChild($parentDiv);
return result.height - result.descent;
}.bind(this);
var height = _getHeight(arguments[0]);
global.Object.defineProperty(textMetrics, "height", { value: height });
return textMetrics;
};
})(window);
You can use it like this
ctx.font = "bold 64px Verdana, sans-serif"; // Automatically considers it as part of height calculation
var textMetrics = ctx.measureText("Foobar");
var textHeight = textMetrics.height;
parseInt(ctx.font, 10)
e.g.
let text_height = parseInt(ctx.font, 10)
e.g. returns 35
In normal situations the following should work:
var can = CanvasElement.getContext('2d'); //get context
var lineHeight = /[0-9]+(?=pt|px)/.exec(can.font); //get height from font variable
This is madding... The height of the text is the font size.. Didn't any of you read the documentation?
context.font = "22px arial";
this will set the height to 22px.
the only reason there is a..
context.measureText(string).width
is because that the width of the string can not be determined unless it knows the string you want the width of but for all the strings drawn with the font.. the height will be 22px.
if you use another measurement than px then the height will still be the same but with that measurement so at most all you would have to do is convert the measurement.
Approximate solution:
var c = document.getElementById("myCanvas");
var ctx = c.getContext("2d");
ctx.font = "100px Arial";
var txt = "Hello guys!"
var wt = ctx.measureText(txt).width;
var height = wt / txt.length;
This will be accurate result in monospaced font.
I have a doughnut chart using Chart.js that displays login data for my app correctly, however I have modified the chart so that the total number of logins is displayed in text in the center cutout:
The problem I am running into is with the tooltips. When I hover over the light teal piece of the pie chart, if the chart is scaled smaller, the tooltip is overlapped by the text in the center, like this:
I want to be able to change the direction the tooltip extends out, so instead of it going towards the center, it moves away so that both the tooltip and the center analytic are visible, but I have yet to find a concise explanation on how to change tooltip positioning. Here is the code I have currently:
var loslogged = dataset[0][0].loslogged;
var realtorlogged = dataset[1][0].realtorlogged;
var borrowerlogged = dataset[2][0].borrowerlogged;
var totallogged = parseInt(loslogged) + parseInt(realtorlogged) + parseInt(borrowerlogged);
Chart.pluginService.register({
afterDraw: function (chart) {
if (chart.config.options.elements.center) {
var helpers = Chart.helpers;
var centerX = (chart.chartArea.left + chart.chartArea.right) / 2;
var centerY = (chart.chartArea.top + chart.chartArea.bottom) / 2;
var ctx = chart.chart.ctx;
ctx.save();
var fontSize = helpers.getValueOrDefault(chart.config.options.elements.center.fontSize, Chart.defaults.global.defaultFontSize);
var fontStyle = helpers.getValueOrDefault(chart.config.options.elements.center.fontStyle, Chart.defaults.global.defaultFontStyle);
var fontFamily = helpers.getValueOrDefault(chart.config.options.elements.center.fontFamily, Chart.defaults.global.defaultFontFamily);
var font = helpers.fontString(fontSize, fontStyle, fontFamily);
ctx.font = font;
ctx.fillStyle = helpers.getValueOrDefault(chart.config.options.elements.center.fontColor, Chart.defaults.global.defaultFontColor);
ctx.textAlign = 'center';
ctx.textBaseline = 'middle';
ctx.fillText(chart.config.options.elements.center.text, centerX, centerY);
ctx.restore();
}
}
});
var loginChartData = {
labels: ["Loan Officers","Realtors","Borrowers"],
datasets: [{
label: "Number of Logins",
data: [loslogged, realtorlogged, borrowerlogged],
backgroundColor: [
"rgba(191, 25, 25, 0.75)",
"rgba(58, 73, 208, 0.75)",
"rgba(79, 201, 188, 0.75)"
],
borderColor: [
"rgba(255, 255, 255, 1)",
"rgba(255, 255, 255, 1)",
"rgba(255, 255, 255, 1)"
],
borderWidth: 4
}],
gridLines: {
display: false
}
};
var loginChartOptions = {
title: {
display: false
},
cutoutPercentage: 50,
elements: {
center: {
text: totallogged,
fontColor: '#000',
fontFamily: "'Helvetica Neue', 'Helvetica', 'Arial', sans-serif",
fontSize: 36,
fontStyle: 'bold'
}
}
};
var loginChart = document.getElementById('loginsChart').getContext('2d');
new Chart(loginChart, {
type: 'doughnut',
data: loginChartData,
options: loginChartOptions
});
It used to be a lot easier to reverse the tooltips in previous versions of chart.js (v2.3 and before). All you had to do was overwrite the determineAlignment tooltip method and reverse the logic.
However starting in v2.4, the functions that calculate the tooltip positions (including determineAlignment) were made private, so there is no longer a way to simply overwrite them (instead you have to duplicate them).
Here is a working reversed tooltip solution that unfortunately requires a lot of copy and paste from the chart.js source (this is required since the methods are private). The risk with this approach is that the underlying private functions could change in new releases at any time and your new reverse tooltip could break unexpectedly.
With that said, here is walk through of the implementation (with a codepen example at the bottom).
1) First, let's extend the Chart.Tooltip object and create a new Chart.ReversedTooltip object. We really only need to overwrite the update method since it performs all the positioning logic. In fact, this overwrite is just a straight copy and paste from the source because we actually only need to modify the private determineAlignment method which is called by update.
// create a new reversed tooltip. we must overwrite the update method which is
// where all the positioning occurs
Chart.ReversedTooltip = Chart.Tooltip.extend({
update: function(changed) {
var me = this;
var opts = me._options;
// Need to regenerate the model because its faster than using extend and it is necessary due to the optimization in Chart.Element.transition
// that does _view = _model if ease === 1. This causes the 2nd tooltip update to set properties in both the view and model at the same time
// which breaks any animations.
var existingModel = me._model;
var model = me._model = getBaseModel(opts);
var active = me._active;
var data = me._data;
var chartInstance = me._chartInstance;
// In the case where active.length === 0 we need to keep these at existing values for good animations
var alignment = {
xAlign: existingModel.xAlign,
yAlign: existingModel.yAlign
};
var backgroundPoint = {
x: existingModel.x,
y: existingModel.y
};
var tooltipSize = {
width: existingModel.width,
height: existingModel.height
};
var tooltipPosition = {
x: existingModel.caretX,
y: existingModel.caretY
};
var i, len;
if (active.length) {
model.opacity = 1;
var labelColors = [];
tooltipPosition = Chart.Tooltip.positioners[opts.position](active, me._eventPosition);
var tooltipItems = [];
for (i = 0, len = active.length; i < len; ++i) {
tooltipItems.push(createTooltipItem(active[i]));
}
// If the user provided a filter function, use it to modify the tooltip items
if (opts.filter) {
tooltipItems = tooltipItems.filter(function(a) {
return opts.filter(a, data);
});
}
// If the user provided a sorting function, use it to modify the tooltip items
if (opts.itemSort) {
tooltipItems = tooltipItems.sort(function(a, b) {
return opts.itemSort(a, b, data);
});
}
// Determine colors for boxes
helpers.each(tooltipItems, function(tooltipItem) {
labelColors.push(opts.callbacks.labelColor.call(me, tooltipItem, chartInstance));
});
// Build the Text Lines
model.title = me.getTitle(tooltipItems, data);
model.beforeBody = me.getBeforeBody(tooltipItems, data);
model.body = me.getBody(tooltipItems, data);
model.afterBody = me.getAfterBody(tooltipItems, data);
model.footer = me.getFooter(tooltipItems, data);
// Initial positioning and colors
model.x = Math.round(tooltipPosition.x);
model.y = Math.round(tooltipPosition.y);
model.caretPadding = helpers.getValueOrDefault(tooltipPosition.padding, 2);
model.labelColors = labelColors;
// data points
model.dataPoints = tooltipItems;
// We need to determine alignment of the tooltip
tooltipSize = getTooltipSize(this, model);
alignment = determineAlignment(this, tooltipSize);
// Final Size and Position
backgroundPoint = getBackgroundPoint(model, tooltipSize, alignment);
} else {
model.opacity = 0;
}
model.xAlign = alignment.xAlign;
model.yAlign = alignment.yAlign;
model.x = backgroundPoint.x;
model.y = backgroundPoint.y;
model.width = tooltipSize.width;
model.height = tooltipSize.height;
// Point where the caret on the tooltip points to
model.caretX = tooltipPosition.x;
model.caretY = tooltipPosition.y;
me._model = model;
if (changed && opts.custom) {
opts.custom.call(me, model);
}
return me;
},
});
2) As you can see, the update method uses a handful of private methods (e.g. getBaseModel, createTooltipItem, determineAlignment, etc.). In order for our update method to actually work, we have to provide an implementation for each of these methods. Here again is another copy and paste from the source. The only method that we need to modify however is the determineAlignment method. Here is the modified version that reverses the alignment logic.
// modified from source to reverse the position
function determineAlignment(tooltip, size) {
var model = tooltip._model;
var chart = tooltip._chart;
var chartArea = tooltip._chartInstance.chartArea;
var xAlign = 'center';
var yAlign = 'center';
// set caret position to top or bottom if tooltip y position will extend outsite the chart top/bottom
if (model.y < size.height) {
yAlign = 'top';
} else if (model.y > (chart.height - size.height)) {
yAlign = 'bottom';
}
var leftAlign, rightAlign; // functions to determine left, right alignment
var overflowLeft, overflowRight; // functions to determine if left/right alignment causes tooltip to go outside chart
var yAlign; // function to get the y alignment if the tooltip goes outside of the left or right edges
var midX = (chartArea.left + chartArea.right) / 2;
var midY = (chartArea.top + chartArea.bottom) / 2;
if (yAlign === 'center') {
leftAlign = function(x) {
return x >= midX;
};
rightAlign = function(x) {
return x < midX;
};
} else {
leftAlign = function(x) {
return x <= (size.width / 2);
};
rightAlign = function(x) {
return x >= (chart.width - (size.width / 2));
};
}
overflowLeft = function(x) {
return x - size.width < 0;
};
overflowRight = function(x) {
return x + size.width > chart.width;
};
yAlign = function(y) {
return y <= midY ? 'bottom' : 'top';
};
if (leftAlign(model.x)) {
xAlign = 'left';
// Is tooltip too wide and goes over the right side of the chart.?
if (overflowLeft(model.x)) {
xAlign = 'center';
yAlign = yAlign(model.y);
}
} else if (rightAlign(model.x)) {
xAlign = 'right';
// Is tooltip too wide and goes outside left edge of canvas?
if (overflowRight(model.x)) {
xAlign = 'center';
yAlign = yAlign(model.y);
}
}
var opts = tooltip._options;
return {
xAlign: opts.xAlign ? opts.xAlign : xAlign,
yAlign: opts.yAlign ? opts.yAlign : yAlign
};
};
3) Now that our new Chart.ReversedTooltip is complete, we need to use the plugin system to change the original tooltip to our reversed tooltip. We can do this using the afterInit plugin method.
Chart.plugins.register({
afterInit: function (chartInstance) {
// replace the original tooltip with the reversed tooltip
chartInstance.tooltip = new Chart.ReversedTooltip({
_chart: chartInstance.chart,
_chartInstance: chartInstance,
_data: chartInstance.data,
_options: chartInstance.options.tooltips
}, chartInstance);
chartInstance.tooltip.initialize();
}
});
After all that, we finally have reversed tooltips! Checkout a full working example at this codepen.
It's also worth mentioning that this approach is very brittle and, as I mentioned, can easily break overtime (on account of the copy and pasting required). Another option would be to just use a custom tooltip instead and position it wherever you desire on the chart.
Checkout this chart.js sample that shows how to setup and use a custom tooltip. You could go with this approach and just modify the positioning logic.
If you have a small tooltip label, you can use simple chart.js options to fix overlaps issue:
plugins: {
tooltip: {
xAlign: 'center',
yAlign: 'bottom'
}
}
I managed to solve the same by setting zIndex of Doughnut wrapper div to 1, settting the zIndex of text shown in the middle of Doughnut to -1, and canvas is transparent by default.
Hope this hels.