Related
I'm trying to immediately invoke a function without using IIFE pattern (enclosing a function definition inside parentheses). Here I see two scenarios:
When a function declaration is invoked immediately: gives SyntaxError.
When a function expression is invoked immediately: executes successfully.
Example 1: gives SyntaxError
//gives `SyntaxError`
function() {
console.log('Inside the function');
}();
Example 2: Executes without any error
// Executes without any error
var x = function() {console.log('Inside the function')}(); // Inside the function
So, I have these doubts:
With this approach, why does it give an error for function declaration but not for function expression?
Is there a way we can immediately invoke a function declaration without using IIFE pattern?
In your code you don't have name for the function that's the reason for syntax error. Even if you would had name it would have thrown error.
function func(){
console.log('x')
}();
The reason is the function declaration doesn't return the values of the function however when you wrap function declaration inside () it forces it be a function expression which returns a value.
In the second example the function() {console.log('Inside the function')} is considered expression because it's on RightHandSide. So it executes without an error.
Is there a way we can immediately invoke a function declaration without using IIFE pattern
You can use + which will make function declaration an expression.
+function(){
console.log('done')
}()
If you don't want to use + and () you can use new keyword
new function(){
console.log('done')
}
Extra
A very interesting question is asked by #cat in the comments. I try to answer it.There are three cases
+function(){} //returns NaN
(+function(){return 5})() //VM140:1 Uncaught TypeError: (+(intermediate value)) is not a function
+function(){return 5}() //5
+function(){} returns NaN
+ acts as Unary Plus here which parses the value next to it to number. As Number(function(){}) returns NaN so it also returns NaN
(+function(){return 5;})() returns Error
Usually IIFE are created using (). () are used to make a function declaration an expression + is short way for that. Now +function(){} is already an expression which returns NaN. So calling NaN will return error. The code is same as
Number(function(){})()
+function(){return 5;}() returns 5
In the above line + is used to make a statement an expression. In the above example first function is called then + is used on it to convert it to number. So the above line is same as
Number(function(){return 5}())
In the proof of statement "+ runs on after the function is called" Consider the below snippet
console.log(typeof +function(){return '5'}());
So in the above snippet you can see the returned value is string '5' but is converted to number because of +
A function declaration, like
function foo() {
}
defines (and hoists) the variable name foo as a function in the current scope. A function declaration doesn't evaluate to a value; it just does something, a bit like an if does something (rather than evaluate to a value).
You can only invoke values which are functions, eg
<somevalue>()
where somevalue is a variable name that refers to a function.
Note that function declarations require function names, because otherwise there's no variable name to assign the function to - your original
//gives `SyntaxError`
function() {
console.log('Inside the function');
}();
throws not because of the () at the end, but because of the lack of a name.
You can put parentheses at the end of a function declaration, as long as there's something inside the parentheses - but these parentheses do not call the function, they evaluate to a value:
function x() {
console.log('Inside the function');
}(console.log('some expression inside parentheses'));
The interpreter sees these as two separate statements, like
function x() {
console.log('Inside the function');
}
// completely separate:
(console.log('some expression inside parentheses'));
The inside of the parentheses gets evaluated and then discarded, since it doesn't get assigned to anything.
(Empty parentheses are forbidden because they can't be evaluated to a value, similar to how const foo = () is forbidden)
The E in IIFE stands for expression, and without the wrapping parenthesis your function is not evaluated as an expression thus the syntax error.
creating an expression is a way of tricking the interpreter and be able to invoke the function immediatly
(function() {
console.log('Inside the function');
})();
In your example you have a function statement followed by the grouping operator, but it's syntactically incorrect for two reasons, first it doesn't have a name, and second because the grouping operator must have an expression inside it, infact if you add a valid one the error will disappear, still you won't obtain your desired result.
function foo() {
console.log('Inside the function');
}();
function foo() {
console.log('Inside the function');
}(1+2);
In order to invoke something, it has to be a function value, a declaration just declares a name, and does not evaluate to the function value itself, hence you cannot invoke it.
A declaration cannot be invoked for the above reason. You have to end up with an expression somehow, either through assignment or grouping (IIFE). So that is a no.
If you give us more context on why you would want to do that, maybe we can help with suggestions.
Not sure why you would want to do it, but:
Is there a way we can immediately invoke a function declaration without using IIFE pattern?
Well, if for function declaration you mean using the keyword function as in:
function name() { return this.name; }
As far as I know, no. You need the extra parentheses to tell the runtime not to assign the function to a name variable, if I understand this stuff right.
Now, what you actually can do is to use Function as in:
new Function('console.log("ey there")')();
Which will execute the console.log code. No need for IIFE here. But I don't see how this could be better than an IIFE.
you can call in either below ways -
~function(){console.log("hi")}()
!function(){console.log("hi")}()
+function(){console.log("hi")}()
-function(){console.log("hi")}()
(function(){console.log("hi")}());
var i = function(){console.log("hi")}();
true && function(){ console.log("hi") }();
0, function(){ console.log("hi") }();
new function(){ console.log("hi") }
new function(){ console.log("hi") }()
I am doing :
eval('function(){ console.log("Hello World"); }')();
But that gives error :
Uncaught SyntaxError: Unexpected token (
Why is this wrong?
The eval operator expects a Program as input, and the grammar of JavaScript requires that all
top-level program elements are either declarations or statements.
The spec says:
Let prog be the ECMAScript code that is the result of parsing x as a Program.
function can't start a top-level statement, but it can start a function declaration, but only when it has a name.
That's why you get "Unexpected token ("; it expects a function name before the parenthesis that opens the argument list.
As others have noted, to eval a function, you need to trick the JavaScript parser into finding an expression where it expects a statement. Wrapping the body in parentheses is one way to do this.
eval expects a statement but:
function(){} is not valid as a statement because the function name is missing.
(function(){}) is instead recognized because the statement is a "statement expression".
The problem is that function as first token triggers the function declaration rule when a statement is expected. When an expression is expected instead (e.g. inside parenthesis) then function triggers the function expression rules where a name is optional but not mandatory.
What you want is this:
eval( '(function(){ console.log("Hello World"); })()' );
Let's break it down. You have a self invoking function (a function that calls itself):
(function(){ console.log("Hello World"); })()
And you're passing it as a string argument to the eval method:
eval( '(function(){ console.log("Hello World"); })()' );
Your main error is trying to call what eval returns by adding parenthesis on the end of the eval method call. If you want the function your passing to immediately invoke itself, the added parenthesis should be part of the thing your passing to eval.
I'm assuming you're trying to do something other than call "Hello World", as you could simply do this:
eval( 'console.log("Hello World");' );
Or, dare I say:
console.log("Hello World");
i am total newbie to JS.
now i have read in a book this code.
var sayMessage = new Function("message", "console.log(message);");
My Question is where are the {} in this function.
i mean how can we write message", "console.log(message); where there needs to be a argument?
thanks.
The JavaScript Function constructor can be used to define functions from strings. The constructor will evaluate the string passed as the last argument as the function body.
Function objects created with the Function constructor are parsed when the function is created. This is less efficient than declaring a function with a function expression or function statement and calling it within your code, because such functions are parsed with the rest of the code.
From the documentation.
That means this statement:
var sayMessage = new Function("message", "console.log(message);");
will be evaluated to this expression:
var sayMessage = function (message) {
console.log(message);
};
You can see how the arguments message and console.log(message) map from one to the other.
There are very few reasons why you would like to do this in the first place, and it is rarely seen in idiomatic JavaScript.
I was reading some posts about closures and saw this everywhere, but there is no clear explanation how it works - everytime I was just told to use it...:
// Create a new anonymous function, to use as a wrapper
(function(){
// The variable that would, normally, be global
var msg = "Thanks for visiting!";
// Binding a new function to a global object
window.onunload = function(){
// Which uses the 'hidden' variable
alert( msg );
};
// Close off the anonymous function and execute it
})();
Ok I see that we will create new anonymous function and then execute it. So after that this simple code should work (and it does):
(function (msg){alert(msg)})('SO');
My question is what kind of magic happens here? I thought that when I wrote:
(function (msg){alert(msg)})
then a new unnamed function would be created like function ""(msg) ...
but then why doesn't this work?
(function (msg){alert(msg)});
('SO');
Why does it need to be in the same line?
Could you please point me some posts or give me an explanation?
Drop the semicolon after the function definition.
(function (msg){alert(msg)})
('SO');
Above should work.
DEMO Page: https://jsfiddle.net/e7ooeq6m/
I have discussed this kind of pattern in this post:
jQuery and $ questions
EDIT:
If you look at ECMA script specification, there are 3 ways you can define a function. (Page 98, Section 13 Function Definition)
1. Using Function constructor
var sum = new Function('a','b', 'return a + b;');
alert(sum(10, 20)); //alerts 30
2. Using Function declaration.
function sum(a, b)
{
return a + b;
}
alert(sum(10, 10)); //Alerts 20;
3. Function Expression
var sum = function(a, b) { return a + b; }
alert(sum(5, 5)); // alerts 10
So you may ask, what's the difference between declaration and expression?
From ECMA Script specification:
FunctionDeclaration :
function Identifier ( FormalParameterListopt ){ FunctionBody
}
FunctionExpression :
function Identifieropt ( FormalParameterListopt ){ FunctionBody
}
If you notice, 'identifier' is optional for function expression. And when you don't give an identifier, you create an anonymous function. It doesn't mean that you can't specify an identifier.
This means following is valid.
var sum = function mySum(a, b) { return a + b; }
Important point to note is that you can use 'mySum' only inside the mySum function body, not outside. See following example:
var test1 = function test2() { alert(typeof test2); }
alert(typeof(test2)); //alerts 'undefined', surprise!
test1(); //alerts 'function' because test2 is a function.
Live Demo
Compare this to
function test1() { alert(typeof test1) };
alert(typeof test1); //alerts 'function'
test1(); //alerts 'function'
Armed with this knowledge, let's try to analyze your code.
When you have code like,
function(msg) { alert(msg); }
You created a function expression. And you can execute this function expression by wrapping it inside parenthesis.
(function(msg) { alert(msg); })('SO'); //alerts SO.
It's called a self-invoked function.
What you are doing when you call (function(){}) is returning a function object. When you append () to it, it is invoked and anything in the body is executed. The ; denotes the end of the statement, that's why the 2nd invocation fails.
One thing I found confusing is that the "()" are grouping operators.
Here is your basic declared function.
Ex. 1:
var message = 'SO';
function foo(msg) {
alert(msg);
}
foo(message);
Functions are objects, and can be grouped. So let's throw parens around the function.
Ex. 2:
var message = 'SO';
function foo(msg) { //declares foo
alert(msg);
}
(foo)(message); // calls foo
Now instead of declaring and right-away calling the same function, we can use basic substitution to declare it as we call it.
Ex. 3.
var message = 'SO';
(function foo(msg) {
alert(msg);
})(message); // declares & calls foo
Finally, we don't have a need for that extra foo because we're not using the name to call it! Functions can be anonymous.
Ex. 4.
var message = 'SO';
(function (msg) { // remove unnecessary reference to foo
alert(msg);
})(message);
To answer your question, refer back to Example 2. Your first line declares some nameless function and groups it, but does not call it. The second line groups a string. Both do nothing. (Vincent's first example.)
(function (msg){alert(msg)});
('SO'); // nothing.
(foo);
(msg); //Still nothing.
But
(foo)
(msg); //works
An anonymous function is not a function with the name "". It is simply a function without a name.
Like any other value in JavaScript, a function does not need a name to be created. Though it is far more useful to actually bind it to a name just like any other value.
But like any other value, you sometimes want to use it without binding it to a name. That's the self-invoking pattern.
Here is a function and a number, not bound, they do nothing and can never be used:
function(){ alert("plop"); }
2;
So we have to store them in a variable to be able to use them, just like any other value:
var f = function(){ alert("plop"); }
var n = 2;
You can also use syntatic sugar to bind the function to a variable:
function f(){ alert("plop"); }
var n = 2;
But if naming them is not required and would lead to more confusion and less readability, you could just use them right away.
(function(){ alert("plop"); })(); // will display "plop"
alert(2 + 3); // will display 5
Here, my function and my numbers are not bound to a variable, but they can still be used.
Said like this, it looks like self-invoking function have no real value. But you have to keep in mind that JavaScript scope delimiter is the function and not the block ({}).
So a self-invoking function actually has the same meaning as a C++, C# or Java block. Which means that variable created inside will not "leak" outside the scope. This is very useful in JavaScript in order not to pollute the global scope.
It's just how JavaScript works. You can declare a named function:
function foo(msg){
alert(msg);
}
And call it:
foo("Hi!");
Or, you can declare an anonymous function:
var foo = function (msg) {
alert(msg);
}
And call that:
foo("Hi!");
Or, you can just never bind the function to a name:
(function(msg){
alert(msg);
})("Hi!");
Functions can also return functions:
function make_foo() {
return function(msg){ alert(msg) };
}
(make_foo())("Hi!");
It's worth nothing that any variables defined with "var" in the body of make_foo will be closed over by each function returned by make_foo. This is a closure, and it means that the any change made to the value by one function will be visible by another.
This lets you encapsulate information, if you desire:
function make_greeter(msg){
return function() { alert(msg) };
}
var hello = make_greeter("Hello!");
hello();
It's just how nearly every programming language but Java works.
The code you show,
(function (msg){alert(msg)});
('SO');
consist of two statements. The first is an expression which yields a function object (which will then be garbage collected because it is not saved). The second is an expression which yields a string. To apply the function to the string, you either need to pass the string as an argument to the function when it is created (which you also show above), or you will need to actually store the function in a variable, so that you can apply it at a later time, at your leisure. Like so:
var f = (function (msg){alert(msg)});
f('SO');
Note that by storing an anonymous function (a lambda function) in a variable, your are effectively giving it a name. Hence you may just as well define a regular function:
function f(msg) {alert(msg)};
f('SO');
In summary of the previous comments:
function() {
alert("hello");
}();
when not assigned to a variable, yields a syntax error. The code is parsed as a function statement (or definition), which renders the closing parentheses syntactically incorrect. Adding parentheses around the function portion tells the interpreter (and programmer) that this is a function expression (or invocation), as in
(function() {
alert("hello");
})();
This is a self-invoking function, meaning it is created anonymously and runs immediately because the invocation happens in the same line where it is declared. This self-invoking function is indicated with the familiar syntax to call a no-argument function, plus added parentheses around the name of the function: (myFunction)();.
There is a good SO discussion JavaScript function syntax.
My understanding of the asker's question is such that:
How does this magic work:
(function(){}) ('input') // Used in his example
I may be wrong. However, the usual practice that people are familiar with is:
(function(){}('input') )
The reason is such that JavaScript parentheses AKA (), can't contain statements and when the parser encounters the function keyword, it knows to parse it as a function expression and not a function declaration.
Source: blog post Immediately-Invoked Function Expression (IIFE)
examples without brackets:
void function (msg) { alert(msg); }
('SO');
(this is the only real use of void, afaik)
or
var a = function (msg) { alert(msg); }
('SO');
or
!function (msg) { alert(msg); }
('SO');
work as well. the void is causing the expression to evaluate, as well as the assignment and the bang. the last one works with ~, +, -, delete, typeof, some of the unary operators (void is one as well). not working are of couse ++, -- because of the requirement of a variable.
the line break is not necessary.
This answer is not strictly related to the question, but you might be interested to find out that this kind of syntax feature is not particular to functions. For example, we can always do something like this:
alert(
{foo: "I am foo", bar: "I am bar"}.foo
); // alerts "I am foo"
Related to functions. As they are objects, which inherit from Function.prototype, we can do things like:
Function.prototype.foo = function () {
return function () {
alert("foo");
};
};
var bar = (function () {}).foo();
bar(); // alerts foo
And you know, we don't even have to surround functions with parenthesis in order to execute them. Anyway, as long as we try to assign the result to a variable.
var x = function () {} (); // this function is executed but does nothing
function () {} (); // syntax error
One other thing you may do with functions, as soon as you declare them, is to invoke the new operator over them and obtain an object. The following are equivalent:
var obj = new function () {
this.foo = "bar";
};
var obj = {
foo : "bar"
};
There is one more property JavaScript function has. If you want to call same anonymous function recursively.
(function forInternalOnly(){
//you can use forInternalOnly to call this anonymous function
/// forInternalOnly can be used inside function only, like
var result = forInternalOnly();
})();
//this will not work
forInternalOnly();// no such a method exist
It is a self-executing anonymous function. The first set of brackets contain the expressions to be executed, and the second set of brackets executes those expressions.
(function () {
return ( 10 + 20 );
})();
Peter Michaux discusses the difference in An Important Pair of Parentheses.
It is a useful construct when trying to hide variables from the parent namespace. All the code within the function is contained in the private scope of the function, meaning it can't be accessed at all from outside the function, making it truly private.
See:
Closure (computer science)
JavaScript Namespacing
Important Pair of Javascript Parentheses
Another point of view
First, you can declare an anonymous function:
var foo = function(msg){
alert(msg);
}
Then you call it:
foo ('Few');
Because foo = function(msg){alert(msg);} so you can replace foo as:
function(msg){
alert(msg);
} ('Few');
But you should wrap your entire anonymous function inside pair of braces to avoid syntax error of declaring function when parsing. Then we have,
(function(msg){
alert(msg);
}) ('Few');
By this way, It's easy understand for me.
When you did:
(function (msg){alert(msg)});
('SO');
You ended the function before ('SO') because of the semicolon. If you just write:
(function (msg){alert(msg)})
('SO');
It will work.
Working example: http://jsfiddle.net/oliverni/dbVjg/
The simple reason why it doesn't work is not because of the ; indicating the end of the anonymous function. It is because without the () on the end of a function call, it is not a function call. That is,
function help() {return true;}
If you call result = help(); this is a call to a function and will return true.
If you call result = help; this is not a call. It is an assignment where help is treated like data to be assigned to result.
What you did was declaring/instantiating an anonymous function by adding the semicolon,
(function (msg) { /* Code here */ });
and then tried to call it in another statement by using just parentheses... Obviously because the function has no name, but this will not work:
('SO');
The interpreter sees the parentheses on the second line as a new instruction/statement, and thus it does not work, even if you did it like this:
(function (msg){/*code here*/});('SO');
It still doesn't work, but it works when you remove the semicolon because the interpreter ignores white spaces and carriages and sees the complete code as one statement.
(function (msg){/*code here*/}) // This space is ignored by the interpreter
('SO');
Conclusion: a function call is not a function call without the () on the end unless under specific conditions such as being invoked by another function, that is, onload='help' would execute the help function even though the parentheses were not included. I believe setTimeout and setInterval also allow this type of function call too, and I also believe that the interpreter adds the parentheses behind the scenes anyhow which brings us back to "a function call is not a function call without the parentheses".
(function (msg){alert(msg)})
('SO');
This is a common method of using an anonymous function as a closure which many JavaScript frameworks use.
This function called is automatically when the code is compiled.
If placing ; at the first line, the compiler treated it as two different lines. So you can't get the same results as above.
This can also be written as:
(function (msg){alert(msg)}('SO'));
For more details, look into JavaScript/Anonymous Functions.
The IIFE simply compartmentalizes the function and hides the msg variable so as to not "pollute" the global namespace. In reality, just keep it simple and do like below unless you are building a billion dollar website.
var msg = "later dude";
window.onunload = function(msg){
alert( msg );
};
You could namespace your msg property using a Revealing Module Pattern like:
var myScript = (function() {
var pub = {};
//myscript.msg
pub.msg = "later dude";
window.onunload = function(msg) {
alert(msg);
};
//API
return pub;
}());
Anonymous functions are functions that are dynamically declared at
runtime. They’re called anonymous functions because they aren’t
given a name in the same way as normal functions.
Anonymous functions are declared using the function operator instead
of the function declaration. You can use the function operator to
create a new function wherever it’s valid to put an expression. For
example, you could declare a new function as a parameter to a
function call or to assign a property of another object.
Here’s a typical example of a named function:
function flyToTheMoon() {
alert("Zoom! Zoom! Zoom!");
}
flyToTheMoon();
Here’s the same example created as an anonymous function:
var flyToTheMoon = function() {
alert("Zoom! Zoom! Zoom!");
}
flyToTheMoon();
For details please read http://helephant.com/2008/08/23/javascript-anonymous-functions/
Anonymous functions are meant to be one-shot deal where you define a function on the fly so that it generates an output from you from an input that you are providing. Except that you did not provide the input. Instead, you wrote something on the second line ('SO'); - an independent statement that has nothing to do with the function. What did you expect? :)
I was reading some posts about closures and saw this everywhere, but there is no clear explanation how it works - everytime I was just told to use it...:
// Create a new anonymous function, to use as a wrapper
(function(){
// The variable that would, normally, be global
var msg = "Thanks for visiting!";
// Binding a new function to a global object
window.onunload = function(){
// Which uses the 'hidden' variable
alert( msg );
};
// Close off the anonymous function and execute it
})();
Ok I see that we will create new anonymous function and then execute it. So after that this simple code should work (and it does):
(function (msg){alert(msg)})('SO');
My question is what kind of magic happens here? I thought that when I wrote:
(function (msg){alert(msg)})
then a new unnamed function would be created like function ""(msg) ...
but then why doesn't this work?
(function (msg){alert(msg)});
('SO');
Why does it need to be in the same line?
Could you please point me some posts or give me an explanation?
Drop the semicolon after the function definition.
(function (msg){alert(msg)})
('SO');
Above should work.
DEMO Page: https://jsfiddle.net/e7ooeq6m/
I have discussed this kind of pattern in this post:
jQuery and $ questions
EDIT:
If you look at ECMA script specification, there are 3 ways you can define a function. (Page 98, Section 13 Function Definition)
1. Using Function constructor
var sum = new Function('a','b', 'return a + b;');
alert(sum(10, 20)); //alerts 30
2. Using Function declaration.
function sum(a, b)
{
return a + b;
}
alert(sum(10, 10)); //Alerts 20;
3. Function Expression
var sum = function(a, b) { return a + b; }
alert(sum(5, 5)); // alerts 10
So you may ask, what's the difference between declaration and expression?
From ECMA Script specification:
FunctionDeclaration :
function Identifier ( FormalParameterListopt ){ FunctionBody
}
FunctionExpression :
function Identifieropt ( FormalParameterListopt ){ FunctionBody
}
If you notice, 'identifier' is optional for function expression. And when you don't give an identifier, you create an anonymous function. It doesn't mean that you can't specify an identifier.
This means following is valid.
var sum = function mySum(a, b) { return a + b; }
Important point to note is that you can use 'mySum' only inside the mySum function body, not outside. See following example:
var test1 = function test2() { alert(typeof test2); }
alert(typeof(test2)); //alerts 'undefined', surprise!
test1(); //alerts 'function' because test2 is a function.
Live Demo
Compare this to
function test1() { alert(typeof test1) };
alert(typeof test1); //alerts 'function'
test1(); //alerts 'function'
Armed with this knowledge, let's try to analyze your code.
When you have code like,
function(msg) { alert(msg); }
You created a function expression. And you can execute this function expression by wrapping it inside parenthesis.
(function(msg) { alert(msg); })('SO'); //alerts SO.
It's called a self-invoked function.
What you are doing when you call (function(){}) is returning a function object. When you append () to it, it is invoked and anything in the body is executed. The ; denotes the end of the statement, that's why the 2nd invocation fails.
One thing I found confusing is that the "()" are grouping operators.
Here is your basic declared function.
Ex. 1:
var message = 'SO';
function foo(msg) {
alert(msg);
}
foo(message);
Functions are objects, and can be grouped. So let's throw parens around the function.
Ex. 2:
var message = 'SO';
function foo(msg) { //declares foo
alert(msg);
}
(foo)(message); // calls foo
Now instead of declaring and right-away calling the same function, we can use basic substitution to declare it as we call it.
Ex. 3.
var message = 'SO';
(function foo(msg) {
alert(msg);
})(message); // declares & calls foo
Finally, we don't have a need for that extra foo because we're not using the name to call it! Functions can be anonymous.
Ex. 4.
var message = 'SO';
(function (msg) { // remove unnecessary reference to foo
alert(msg);
})(message);
To answer your question, refer back to Example 2. Your first line declares some nameless function and groups it, but does not call it. The second line groups a string. Both do nothing. (Vincent's first example.)
(function (msg){alert(msg)});
('SO'); // nothing.
(foo);
(msg); //Still nothing.
But
(foo)
(msg); //works
An anonymous function is not a function with the name "". It is simply a function without a name.
Like any other value in JavaScript, a function does not need a name to be created. Though it is far more useful to actually bind it to a name just like any other value.
But like any other value, you sometimes want to use it without binding it to a name. That's the self-invoking pattern.
Here is a function and a number, not bound, they do nothing and can never be used:
function(){ alert("plop"); }
2;
So we have to store them in a variable to be able to use them, just like any other value:
var f = function(){ alert("plop"); }
var n = 2;
You can also use syntatic sugar to bind the function to a variable:
function f(){ alert("plop"); }
var n = 2;
But if naming them is not required and would lead to more confusion and less readability, you could just use them right away.
(function(){ alert("plop"); })(); // will display "plop"
alert(2 + 3); // will display 5
Here, my function and my numbers are not bound to a variable, but they can still be used.
Said like this, it looks like self-invoking function have no real value. But you have to keep in mind that JavaScript scope delimiter is the function and not the block ({}).
So a self-invoking function actually has the same meaning as a C++, C# or Java block. Which means that variable created inside will not "leak" outside the scope. This is very useful in JavaScript in order not to pollute the global scope.
It's just how JavaScript works. You can declare a named function:
function foo(msg){
alert(msg);
}
And call it:
foo("Hi!");
Or, you can declare an anonymous function:
var foo = function (msg) {
alert(msg);
}
And call that:
foo("Hi!");
Or, you can just never bind the function to a name:
(function(msg){
alert(msg);
})("Hi!");
Functions can also return functions:
function make_foo() {
return function(msg){ alert(msg) };
}
(make_foo())("Hi!");
It's worth nothing that any variables defined with "var" in the body of make_foo will be closed over by each function returned by make_foo. This is a closure, and it means that the any change made to the value by one function will be visible by another.
This lets you encapsulate information, if you desire:
function make_greeter(msg){
return function() { alert(msg) };
}
var hello = make_greeter("Hello!");
hello();
It's just how nearly every programming language but Java works.
The code you show,
(function (msg){alert(msg)});
('SO');
consist of two statements. The first is an expression which yields a function object (which will then be garbage collected because it is not saved). The second is an expression which yields a string. To apply the function to the string, you either need to pass the string as an argument to the function when it is created (which you also show above), or you will need to actually store the function in a variable, so that you can apply it at a later time, at your leisure. Like so:
var f = (function (msg){alert(msg)});
f('SO');
Note that by storing an anonymous function (a lambda function) in a variable, your are effectively giving it a name. Hence you may just as well define a regular function:
function f(msg) {alert(msg)};
f('SO');
In summary of the previous comments:
function() {
alert("hello");
}();
when not assigned to a variable, yields a syntax error. The code is parsed as a function statement (or definition), which renders the closing parentheses syntactically incorrect. Adding parentheses around the function portion tells the interpreter (and programmer) that this is a function expression (or invocation), as in
(function() {
alert("hello");
})();
This is a self-invoking function, meaning it is created anonymously and runs immediately because the invocation happens in the same line where it is declared. This self-invoking function is indicated with the familiar syntax to call a no-argument function, plus added parentheses around the name of the function: (myFunction)();.
There is a good SO discussion JavaScript function syntax.
My understanding of the asker's question is such that:
How does this magic work:
(function(){}) ('input') // Used in his example
I may be wrong. However, the usual practice that people are familiar with is:
(function(){}('input') )
The reason is such that JavaScript parentheses AKA (), can't contain statements and when the parser encounters the function keyword, it knows to parse it as a function expression and not a function declaration.
Source: blog post Immediately-Invoked Function Expression (IIFE)
examples without brackets:
void function (msg) { alert(msg); }
('SO');
(this is the only real use of void, afaik)
or
var a = function (msg) { alert(msg); }
('SO');
or
!function (msg) { alert(msg); }
('SO');
work as well. the void is causing the expression to evaluate, as well as the assignment and the bang. the last one works with ~, +, -, delete, typeof, some of the unary operators (void is one as well). not working are of couse ++, -- because of the requirement of a variable.
the line break is not necessary.
This answer is not strictly related to the question, but you might be interested to find out that this kind of syntax feature is not particular to functions. For example, we can always do something like this:
alert(
{foo: "I am foo", bar: "I am bar"}.foo
); // alerts "I am foo"
Related to functions. As they are objects, which inherit from Function.prototype, we can do things like:
Function.prototype.foo = function () {
return function () {
alert("foo");
};
};
var bar = (function () {}).foo();
bar(); // alerts foo
And you know, we don't even have to surround functions with parenthesis in order to execute them. Anyway, as long as we try to assign the result to a variable.
var x = function () {} (); // this function is executed but does nothing
function () {} (); // syntax error
One other thing you may do with functions, as soon as you declare them, is to invoke the new operator over them and obtain an object. The following are equivalent:
var obj = new function () {
this.foo = "bar";
};
var obj = {
foo : "bar"
};
There is one more property JavaScript function has. If you want to call same anonymous function recursively.
(function forInternalOnly(){
//you can use forInternalOnly to call this anonymous function
/// forInternalOnly can be used inside function only, like
var result = forInternalOnly();
})();
//this will not work
forInternalOnly();// no such a method exist
It is a self-executing anonymous function. The first set of brackets contain the expressions to be executed, and the second set of brackets executes those expressions.
(function () {
return ( 10 + 20 );
})();
Peter Michaux discusses the difference in An Important Pair of Parentheses.
It is a useful construct when trying to hide variables from the parent namespace. All the code within the function is contained in the private scope of the function, meaning it can't be accessed at all from outside the function, making it truly private.
See:
Closure (computer science)
JavaScript Namespacing
Important Pair of Javascript Parentheses
Another point of view
First, you can declare an anonymous function:
var foo = function(msg){
alert(msg);
}
Then you call it:
foo ('Few');
Because foo = function(msg){alert(msg);} so you can replace foo as:
function(msg){
alert(msg);
} ('Few');
But you should wrap your entire anonymous function inside pair of braces to avoid syntax error of declaring function when parsing. Then we have,
(function(msg){
alert(msg);
}) ('Few');
By this way, It's easy understand for me.
When you did:
(function (msg){alert(msg)});
('SO');
You ended the function before ('SO') because of the semicolon. If you just write:
(function (msg){alert(msg)})
('SO');
It will work.
Working example: http://jsfiddle.net/oliverni/dbVjg/
The simple reason why it doesn't work is not because of the ; indicating the end of the anonymous function. It is because without the () on the end of a function call, it is not a function call. That is,
function help() {return true;}
If you call result = help(); this is a call to a function and will return true.
If you call result = help; this is not a call. It is an assignment where help is treated like data to be assigned to result.
What you did was declaring/instantiating an anonymous function by adding the semicolon,
(function (msg) { /* Code here */ });
and then tried to call it in another statement by using just parentheses... Obviously because the function has no name, but this will not work:
('SO');
The interpreter sees the parentheses on the second line as a new instruction/statement, and thus it does not work, even if you did it like this:
(function (msg){/*code here*/});('SO');
It still doesn't work, but it works when you remove the semicolon because the interpreter ignores white spaces and carriages and sees the complete code as one statement.
(function (msg){/*code here*/}) // This space is ignored by the interpreter
('SO');
Conclusion: a function call is not a function call without the () on the end unless under specific conditions such as being invoked by another function, that is, onload='help' would execute the help function even though the parentheses were not included. I believe setTimeout and setInterval also allow this type of function call too, and I also believe that the interpreter adds the parentheses behind the scenes anyhow which brings us back to "a function call is not a function call without the parentheses".
(function (msg){alert(msg)})
('SO');
This is a common method of using an anonymous function as a closure which many JavaScript frameworks use.
This function called is automatically when the code is compiled.
If placing ; at the first line, the compiler treated it as two different lines. So you can't get the same results as above.
This can also be written as:
(function (msg){alert(msg)}('SO'));
For more details, look into JavaScript/Anonymous Functions.
The IIFE simply compartmentalizes the function and hides the msg variable so as to not "pollute" the global namespace. In reality, just keep it simple and do like below unless you are building a billion dollar website.
var msg = "later dude";
window.onunload = function(msg){
alert( msg );
};
You could namespace your msg property using a Revealing Module Pattern like:
var myScript = (function() {
var pub = {};
//myscript.msg
pub.msg = "later dude";
window.onunload = function(msg) {
alert(msg);
};
//API
return pub;
}());
Anonymous functions are functions that are dynamically declared at
runtime. They’re called anonymous functions because they aren’t
given a name in the same way as normal functions.
Anonymous functions are declared using the function operator instead
of the function declaration. You can use the function operator to
create a new function wherever it’s valid to put an expression. For
example, you could declare a new function as a parameter to a
function call or to assign a property of another object.
Here’s a typical example of a named function:
function flyToTheMoon() {
alert("Zoom! Zoom! Zoom!");
}
flyToTheMoon();
Here’s the same example created as an anonymous function:
var flyToTheMoon = function() {
alert("Zoom! Zoom! Zoom!");
}
flyToTheMoon();
For details please read http://helephant.com/2008/08/23/javascript-anonymous-functions/
Anonymous functions are meant to be one-shot deal where you define a function on the fly so that it generates an output from you from an input that you are providing. Except that you did not provide the input. Instead, you wrote something on the second line ('SO'); - an independent statement that has nothing to do with the function. What did you expect? :)