Develop Reference

Why does my text disappear in javascript? [duplicate]

I have a string, let's say Hello world and I need to replace the char at index 3. How can I replace a char by specifying a index?
var str = "hello world";
I need something like
str.replaceAt(0,"h");

In JavaScript, strings are immutable, which means the best you can do is to create a new string with the changed content and assign the variable to point to it.
You'll need to define the replaceAt() function yourself:
String.prototype.replaceAt = function(index, replacement) {
return this.substring(0, index) + replacement + this.substring(index + replacement.length);
}
And use it like this:
var hello = "Hello World";
alert(hello.replaceAt(2, "!!")); // He!!o World

There is no replaceAt function in JavaScript. You can use the following code to replace any character in any string at specified position:
function rep() {
var str = 'Hello World';
str = setCharAt(str,4,'a');
alert(str);
}
function setCharAt(str,index,chr) {
if(index > str.length-1) return str;
return str.substring(0,index) + chr + str.substring(index+1);
}
<button onclick="rep();">click</button>

You can't. Take the characters before and after the position and concat into a new string:
var s = "Hello world";
var index = 3;
s = s.substring(0, index) + 'x' + s.substring(index + 1);

str = str.split('');
str[3] = 'h';
str = str.join('');

There are lot of answers here, and all of them are based on two methods:
METHOD1: split the string using two substrings and stuff the character between them
METHOD2: convert the string to character array, replace one array member and join it
Personally, I would use these two methods in different cases. Let me explain.
#FabioPhms: Your method was the one I initially used and I was afraid that it is bad on string with lots of characters. However, question is what's a lot of characters? I tested it on 10 "lorem ipsum" paragraphs and it took a few milliseconds. Then I tested it on 10 times larger string - there was really no big difference. Hm.
#vsync, #Cory Mawhorter: Your comments are unambiguous; however, again, what is a large string? I agree that for 32...100kb performance should better and one should use substring-variant for this one operation of character replacement.
But what will happen if I have to make quite a few replacements?
I needed to perform my own tests to prove what is faster in that case. Let's say we have an algorithm that will manipulate a relatively short string that consists of 1000 characters. We expect that in average each character in that string will be replaced ~100 times. So, the code to test something like this is:
var str = "... {A LARGE STRING HERE} ...";
for(var i=0; i<100000; i++)
{
var n = '' + Math.floor(Math.random() * 10);
var p = Math.floor(Math.random() * 1000);
// replace character *n* on position *p*
}
I created a fiddle for this, and it's here.
There are two tests, TEST1 (substring) and TEST2 (array conversion).
Results:
TEST1: 195ms
TEST2: 6ms
It seems that array conversion beats substring by 2 orders of magnitude! So - what the hell happened here???
What actually happens is that all operations in TEST2 are done on array itself, using assignment expression like strarr2[p] = n. Assignment is really fast compared to substring on a large string, and its clear that it's going to win.
So, it's all about choosing the right tool for the job. Again.

Work with vectors is usually most effective to contact String.
I suggest the following function:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
Run this snippet:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
var str = "hello world";
str = str.replaceAt(3, "#");
document.write(str);

In Javascript strings are immutable so you have to do something like
var x = "Hello world"
x = x.substring(0, i) + 'h' + x.substring(i+1);
To replace the character in x at i with 'h'

function dothis() {
var x = document.getElementById("x").value;
var index = document.getElementById("index").value;
var text = document.getElementById("text").value;
var length = document.getElementById("length").value;
var arr = x.split("");
arr.splice(index, length, text);
var result = arr.join("");
document.getElementById('output').innerHTML = result;
console.log(result);
}
dothis();
<input id="x" type="text" value="White Dog" placeholder="Enter Text" />
<input id="index" type="number" min="0"value="6" style="width:50px" placeholder="index" />
<input id="length" type="number" min="0"value="1" style="width:50px" placeholder="length" />
<input id="text" type="text" value="F" placeholder="New character" />
<br>
<button id="submit" onclick="dothis()">Run</button>
<p id="output"></p>
This method is good for small length strings but may be slow for larger text.
var x = "White Dog";
var arr = x.split(""); // ["W", "h", "i", "t", "e", " ", "D", "o", "g"]
arr.splice(6, 1, 'F');
/*
Here 6 is starting index and 1 is no. of array elements to remove and
final argument 'F' is the new character to be inserted.
*/
var result = arr.join(""); // "White Fog"

One-liner using String.replace with callback (no emoji support):
// 0 - index to replace, 'f' - replacement string
'dog'.replace(/./g, (c, i) => i == 0? 'f': c)
// "fog"
Explained:
//String.replace will call the callback on each pattern match
//in this case - each character
'dog'.replace(/./g, function (character, index) {
if (index == 0) //we want to replace the first character
return 'f'
return character //leaving other characters the same
})

Generalizing Afanasii Kurakin's answer, we have:
function replaceAt(str, index, ch) {
return str.replace(/./g, (c, i) => i == index ? ch : c);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
Let's expand and explain both the regular expression and the replacer function:
function replaceAt(str, index, newChar) {
function replacer(origChar, strIndex) {
if (strIndex === index)
return newChar;
else
return origChar;
}
return str.replace(/./g, replacer);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
The regular expression . matches exactly one character. The g makes it match every character in a for loop. The replacer function is called given both the original character and the index of where that character is in the string. We make a simple if statement to determine if we're going to return either origChar or newChar.

var str = "hello world";
console.log(str);
var arr = [...str];
arr[0] = "H";
str = arr.join("");
console.log(str);

This works similar to Array.splice:
String.prototype.splice = function (i, j, str) {
return this.substr(0, i) + str + this.substr(j, this.length);
};

You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");

this is easily achievable with RegExp!
const str = 'Hello RegEx!';
const index = 11;
const replaceWith = 'p';
//'Hello RegEx!'.replace(/^(.{11})(.)/, `$1p`);
str.replace(new RegExp(`^(.{${ index }})(.)`), `$1${ replaceWith }`);
//< "Hello RegExp"

Using the spread syntax, you may convert the string to an array, assign the character at the given position, and convert back to a string:
const str = "hello world";
function replaceAt(s, i, c) {
const arr = [...s]; // Convert string to array
arr[i] = c; // Set char c at pos i
return arr.join(''); // Back to string
}
// prints "hallo world"
console.log(replaceAt(str, 1, 'a'));

You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
Check out this function for printing steps
steps(3)
// '# '
// '## '
// '###'
function steps(n, i = 0, arr = Array(n).fill(' ').join('')) {
if (i === n) {
return;
}
str = arr.split('');
str[i] = '#';
str = str.join('');
console.log(str);
steps(n, (i = i + 1), str);
}

#CemKalyoncu: Thanks for the great answer!
I also adapted it slightly to make it more like the Array.splice method (and took #Ates' note into consideration):
spliceString=function(string, index, numToDelete, char) {
return string.substr(0, index) + char + string.substr(index+numToDelete);
}
var myString="hello world!";
spliceString(myString,myString.lastIndexOf('l'),2,'mhole'); // "hello wormhole!"

If you want to replace characters in string, you should create mutable strings. These are essentially character arrays. You could create a factory:
function MutableString(str) {
var result = str.split("");
result.toString = function() {
return this.join("");
}
return result;
}
Then you can access the characters and the whole array converts to string when used as string:
var x = MutableString("Hello");
x[0] = "B"; // yes, we can alter the character
x.push("!"); // good performance: no new string is created
var y = "Hi, "+x; // converted to string: "Hi, Bello!"

You can extend the string type to include the inset method:
String.prototype.append = function (index,value) {
return this.slice(0,index) + value + this.slice(index);
};
var s = "New string";
alert(s.append(4,"complete "));
Then you can call the function:

You can concatenate using sub-string function at first select text before targeted index and after targeted index then concatenate with your potential char or string. This one is better
const myString = "Hello world";
const index = 3;
const stringBeforeIndex = myString.substring(0, index);
const stringAfterIndex = myString.substring(index + 1);
const replaceChar = "X";
myString = stringBeforeIndex + replaceChar + stringAfterIndex;
console.log("New string - ", myString)
or
const myString = "Hello world";
let index = 3;
myString = myString.substring(0, index) + "X" + myString.substring(index + 1);

I did a function that does something similar to what you ask, it checks if a character in string is in an array of not allowed characters if it is it replaces it with ''
var validate = function(value){
var notAllowed = [";","_",">","<","'","%","$","&","/","|",":","=","*"];
for(var i=0; i<value.length; i++){
if(notAllowed.indexOf(value.charAt(i)) > -1){
value = value.replace(value.charAt(i), "");
value = validate(value);
}
}
return value;
}

Here is a version I came up with if you want to style words or individual characters at their index in react/javascript.
replaceAt( yourArrayOfIndexes, yourString/orArrayOfStrings )
Working example: https://codesandbox.io/s/ov7zxp9mjq
function replaceAt(indexArray, [...string]) {
const replaceValue = i => string[i] = <b>{string[i]}</b>;
indexArray.forEach(replaceValue);
return string;
}
And here is another alternate method
function replaceAt(indexArray, [...string]) {
const startTag = '<b>';
const endTag = '</b>';
const tagLetter = i => string.splice(i, 1, startTag + string[i] + endTag);
indexArray.forEach(tagLetter);
return string.join('');
}
And another...
function replaceAt(indexArray, [...string]) {
for (let i = 0; i < indexArray.length; i++) {
string = Object.assign(string, {
[indexArray[i]]: <b>{string[indexArray[i]]}</b>
});
}
return string;
}

Here is my solution using the ternary and map operator. More readable, maintainable end easier to understand if you ask me.
It is more into es6 and best practices.
function replaceAt() {
const replaceAt = document.getElementById('replaceAt').value;
const str = 'ThisIsATestStringToReplaceCharAtSomePosition';
const newStr = Array.from(str).map((character, charIndex) => charIndex === (replaceAt - 1) ? '' : character).join('');
console.log(`New string: ${newStr}`);
}
<input type="number" id="replaceAt" min="1" max="44" oninput="replaceAt()"/>

My safe approach with negative indexes
/**
* #param {string} str
* #param {number} index
* #param {string} replacement
* #returns {string}
*/
static replaceAt (str, index, replacement)
{
if (index < 0) index = str.length + index
if (index < 0 || index >= str.length) throw new Error(`Index (${index}) out of bounds "${str}"`)
return str.substring(0, index) + replacement + str.substring(index + 1)
}
Use it like that:
replaceAt('my string', -1, 'G') // 'my strinG'
replaceAt('my string', 2, 'yy') // 'myyystring'
replaceAt('my string', 22, 'yy') // Uncaught Error: Index (22) out of bounds "my string"

Lets say you want to replace Kth index (0-based index) with 'Z'.
You could use Regex to do this.
var re = var re = new RegExp("((.){" + K + "})((.){1})")
str.replace(re, "$1A$`");

You can use the following function to replace Character or String at a particular position of a String. To replace all the following match cases use String.prototype.replaceAllMatches() function.
String.prototype.replaceMatch = function(matchkey, replaceStr, matchIndex) {
var retStr = this, repeatedIndex = 0;
for (var x = 0; (matchkey != null) && (retStr.indexOf(matchkey) > -1); x++) {
if (repeatedIndex == 0 && x == 0) {
repeatedIndex = retStr.indexOf(matchkey);
} else { // matchIndex > 0
repeatedIndex = retStr.indexOf(matchkey, repeatedIndex + 1);
}
if (x == matchIndex) {
retStr = retStr.substring(0, repeatedIndex) + replaceStr + retStr.substring(repeatedIndex + (matchkey.length));
matchkey = null; // To break the loop.
}
}
return retStr;
};
Test:
var str = "yash yas $dfdas.**";
console.log('Index Matched replace : ', str.replaceMatch('as', '*', 2) );
console.log('Index Matched replace : ', str.replaceMatch('y', '~', 1) );
Output:
Index Matched replace : yash yas $dfd*.**
Index Matched replace : yash ~as $dfdas.**

I se this to make a string proper case, that is, the first letter is Upper Case and all the rest are lower case:
function toProperCase(someString){
return someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length));
};
This first thing done is to ensure ALL the string is lower case - someString.toLowerCase()
then it converts the very first character to upper case -someString.charAt(0).toUpperCase()
then it takes a substring of the remaining string less the first character -someString.toLowerCase().substring(1,someString.length))
then it concatenates the two and returns the new string -someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length))
New parameters could be added for the replacement character index and the replacement character, then two substrings formed and the indexed character replaced then concatenated in much the same way.

The solution does not work for negative index so I add a patch to it.
String.prototype.replaceAt=function(index, character) {
if(index>-1) return this.substr(0, index) + character + this.substr(index+character.length);
else return this.substr(0, this.length+index) + character + this.substr(index+character.length);
}

"hello world".replace(/(.{3})./, "$1h")
// 'helho world'

The methods on here are complicated.
I would do it this way:
var myString = "this is my string";
myString = myString.replace(myString.charAt(number goes here), "insert replacement here");
This is as simple as it gets.

Javascript replace not working in array string element [duplicate]

I have a string, let's say Hello world and I need to replace the char at index 3. How can I replace a char by specifying a index?
var str = "hello world";
I need something like
str.replaceAt(0,"h");

In JavaScript, strings are immutable, which means the best you can do is to create a new string with the changed content and assign the variable to point to it.
You'll need to define the replaceAt() function yourself:
String.prototype.replaceAt = function(index, replacement) {
return this.substring(0, index) + replacement + this.substring(index + replacement.length);
}
And use it like this:
var hello = "Hello World";
alert(hello.replaceAt(2, "!!")); // He!!o World

There is no replaceAt function in JavaScript. You can use the following code to replace any character in any string at specified position:
function rep() {
var str = 'Hello World';
str = setCharAt(str,4,'a');
alert(str);
}
function setCharAt(str,index,chr) {
if(index > str.length-1) return str;
return str.substring(0,index) + chr + str.substring(index+1);
}
<button onclick="rep();">click</button>

You can't. Take the characters before and after the position and concat into a new string:
var s = "Hello world";
var index = 3;
s = s.substring(0, index) + 'x' + s.substring(index + 1);

str = str.split('');
str[3] = 'h';
str = str.join('');

There are lot of answers here, and all of them are based on two methods:
METHOD1: split the string using two substrings and stuff the character between them
METHOD2: convert the string to character array, replace one array member and join it
Personally, I would use these two methods in different cases. Let me explain.
#FabioPhms: Your method was the one I initially used and I was afraid that it is bad on string with lots of characters. However, question is what's a lot of characters? I tested it on 10 "lorem ipsum" paragraphs and it took a few milliseconds. Then I tested it on 10 times larger string - there was really no big difference. Hm.
#vsync, #Cory Mawhorter: Your comments are unambiguous; however, again, what is a large string? I agree that for 32...100kb performance should better and one should use substring-variant for this one operation of character replacement.
But what will happen if I have to make quite a few replacements?
I needed to perform my own tests to prove what is faster in that case. Let's say we have an algorithm that will manipulate a relatively short string that consists of 1000 characters. We expect that in average each character in that string will be replaced ~100 times. So, the code to test something like this is:
var str = "... {A LARGE STRING HERE} ...";
for(var i=0; i<100000; i++)
{
var n = '' + Math.floor(Math.random() * 10);
var p = Math.floor(Math.random() * 1000);
// replace character *n* on position *p*
}
I created a fiddle for this, and it's here.
There are two tests, TEST1 (substring) and TEST2 (array conversion).
Results:
TEST1: 195ms
TEST2: 6ms
It seems that array conversion beats substring by 2 orders of magnitude! So - what the hell happened here???
What actually happens is that all operations in TEST2 are done on array itself, using assignment expression like strarr2[p] = n. Assignment is really fast compared to substring on a large string, and its clear that it's going to win.
So, it's all about choosing the right tool for the job. Again.

Work with vectors is usually most effective to contact String.
I suggest the following function:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
Run this snippet:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
var str = "hello world";
str = str.replaceAt(3, "#");
document.write(str);

In Javascript strings are immutable so you have to do something like
var x = "Hello world"
x = x.substring(0, i) + 'h' + x.substring(i+1);
To replace the character in x at i with 'h'

function dothis() {
var x = document.getElementById("x").value;
var index = document.getElementById("index").value;
var text = document.getElementById("text").value;
var length = document.getElementById("length").value;
var arr = x.split("");
arr.splice(index, length, text);
var result = arr.join("");
document.getElementById('output').innerHTML = result;
console.log(result);
}
dothis();
<input id="x" type="text" value="White Dog" placeholder="Enter Text" />
<input id="index" type="number" min="0"value="6" style="width:50px" placeholder="index" />
<input id="length" type="number" min="0"value="1" style="width:50px" placeholder="length" />
<input id="text" type="text" value="F" placeholder="New character" />
<br>
<button id="submit" onclick="dothis()">Run</button>
<p id="output"></p>
This method is good for small length strings but may be slow for larger text.
var x = "White Dog";
var arr = x.split(""); // ["W", "h", "i", "t", "e", " ", "D", "o", "g"]
arr.splice(6, 1, 'F');
/*
Here 6 is starting index and 1 is no. of array elements to remove and
final argument 'F' is the new character to be inserted.
*/
var result = arr.join(""); // "White Fog"

One-liner using String.replace with callback (no emoji support):
// 0 - index to replace, 'f' - replacement string
'dog'.replace(/./g, (c, i) => i == 0? 'f': c)
// "fog"
Explained:
//String.replace will call the callback on each pattern match
//in this case - each character
'dog'.replace(/./g, function (character, index) {
if (index == 0) //we want to replace the first character
return 'f'
return character //leaving other characters the same
})

Generalizing Afanasii Kurakin's answer, we have:
function replaceAt(str, index, ch) {
return str.replace(/./g, (c, i) => i == index ? ch : c);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
Let's expand and explain both the regular expression and the replacer function:
function replaceAt(str, index, newChar) {
function replacer(origChar, strIndex) {
if (strIndex === index)
return newChar;
else
return origChar;
}
return str.replace(/./g, replacer);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
The regular expression . matches exactly one character. The g makes it match every character in a for loop. The replacer function is called given both the original character and the index of where that character is in the string. We make a simple if statement to determine if we're going to return either origChar or newChar.

var str = "hello world";
console.log(str);
var arr = [...str];
arr[0] = "H";
str = arr.join("");
console.log(str);

This works similar to Array.splice:
String.prototype.splice = function (i, j, str) {
return this.substr(0, i) + str + this.substr(j, this.length);
};

You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");

this is easily achievable with RegExp!
const str = 'Hello RegEx!';
const index = 11;
const replaceWith = 'p';
//'Hello RegEx!'.replace(/^(.{11})(.)/, `$1p`);
str.replace(new RegExp(`^(.{${ index }})(.)`), `$1${ replaceWith }`);
//< "Hello RegExp"

Using the spread syntax, you may convert the string to an array, assign the character at the given position, and convert back to a string:
const str = "hello world";
function replaceAt(s, i, c) {
const arr = [...s]; // Convert string to array
arr[i] = c; // Set char c at pos i
return arr.join(''); // Back to string
}
// prints "hallo world"
console.log(replaceAt(str, 1, 'a'));

You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
Check out this function for printing steps
steps(3)
// '# '
// '## '
// '###'
function steps(n, i = 0, arr = Array(n).fill(' ').join('')) {
if (i === n) {
return;
}
str = arr.split('');
str[i] = '#';
str = str.join('');
console.log(str);
steps(n, (i = i + 1), str);
}

#CemKalyoncu: Thanks for the great answer!
I also adapted it slightly to make it more like the Array.splice method (and took #Ates' note into consideration):
spliceString=function(string, index, numToDelete, char) {
return string.substr(0, index) + char + string.substr(index+numToDelete);
}
var myString="hello world!";
spliceString(myString,myString.lastIndexOf('l'),2,'mhole'); // "hello wormhole!"

If you want to replace characters in string, you should create mutable strings. These are essentially character arrays. You could create a factory:
function MutableString(str) {
var result = str.split("");
result.toString = function() {
return this.join("");
}
return result;
}
Then you can access the characters and the whole array converts to string when used as string:
var x = MutableString("Hello");
x[0] = "B"; // yes, we can alter the character
x.push("!"); // good performance: no new string is created
var y = "Hi, "+x; // converted to string: "Hi, Bello!"

You can extend the string type to include the inset method:
String.prototype.append = function (index,value) {
return this.slice(0,index) + value + this.slice(index);
};
var s = "New string";
alert(s.append(4,"complete "));
Then you can call the function:

You can concatenate using sub-string function at first select text before targeted index and after targeted index then concatenate with your potential char or string. This one is better
const myString = "Hello world";
const index = 3;
const stringBeforeIndex = myString.substring(0, index);
const stringAfterIndex = myString.substring(index + 1);
const replaceChar = "X";
myString = stringBeforeIndex + replaceChar + stringAfterIndex;
console.log("New string - ", myString)
or
const myString = "Hello world";
let index = 3;
myString = myString.substring(0, index) + "X" + myString.substring(index + 1);

I did a function that does something similar to what you ask, it checks if a character in string is in an array of not allowed characters if it is it replaces it with ''
var validate = function(value){
var notAllowed = [";","_",">","<","'","%","$","&","/","|",":","=","*"];
for(var i=0; i<value.length; i++){
if(notAllowed.indexOf(value.charAt(i)) > -1){
value = value.replace(value.charAt(i), "");
value = validate(value);
}
}
return value;
}

Here is a version I came up with if you want to style words or individual characters at their index in react/javascript.
replaceAt( yourArrayOfIndexes, yourString/orArrayOfStrings )
Working example: https://codesandbox.io/s/ov7zxp9mjq
function replaceAt(indexArray, [...string]) {
const replaceValue = i => string[i] = <b>{string[i]}</b>;
indexArray.forEach(replaceValue);
return string;
}
And here is another alternate method
function replaceAt(indexArray, [...string]) {
const startTag = '<b>';
const endTag = '</b>';
const tagLetter = i => string.splice(i, 1, startTag + string[i] + endTag);
indexArray.forEach(tagLetter);
return string.join('');
}
And another...
function replaceAt(indexArray, [...string]) {
for (let i = 0; i < indexArray.length; i++) {
string = Object.assign(string, {
[indexArray[i]]: <b>{string[indexArray[i]]}</b>
});
}
return string;
}

Here is my solution using the ternary and map operator. More readable, maintainable end easier to understand if you ask me.
It is more into es6 and best practices.
function replaceAt() {
const replaceAt = document.getElementById('replaceAt').value;
const str = 'ThisIsATestStringToReplaceCharAtSomePosition';
const newStr = Array.from(str).map((character, charIndex) => charIndex === (replaceAt - 1) ? '' : character).join('');
console.log(`New string: ${newStr}`);
}
<input type="number" id="replaceAt" min="1" max="44" oninput="replaceAt()"/>

My safe approach with negative indexes
/**
* #param {string} str
* #param {number} index
* #param {string} replacement
* #returns {string}
*/
static replaceAt (str, index, replacement)
{
if (index < 0) index = str.length + index
if (index < 0 || index >= str.length) throw new Error(`Index (${index}) out of bounds "${str}"`)
return str.substring(0, index) + replacement + str.substring(index + 1)
}
Use it like that:
replaceAt('my string', -1, 'G') // 'my strinG'
replaceAt('my string', 2, 'yy') // 'myyystring'
replaceAt('my string', 22, 'yy') // Uncaught Error: Index (22) out of bounds "my string"

Lets say you want to replace Kth index (0-based index) with 'Z'.
You could use Regex to do this.
var re = var re = new RegExp("((.){" + K + "})((.){1})")
str.replace(re, "$1A$`");

You can use the following function to replace Character or String at a particular position of a String. To replace all the following match cases use String.prototype.replaceAllMatches() function.
String.prototype.replaceMatch = function(matchkey, replaceStr, matchIndex) {
var retStr = this, repeatedIndex = 0;
for (var x = 0; (matchkey != null) && (retStr.indexOf(matchkey) > -1); x++) {
if (repeatedIndex == 0 && x == 0) {
repeatedIndex = retStr.indexOf(matchkey);
} else { // matchIndex > 0
repeatedIndex = retStr.indexOf(matchkey, repeatedIndex + 1);
}
if (x == matchIndex) {
retStr = retStr.substring(0, repeatedIndex) + replaceStr + retStr.substring(repeatedIndex + (matchkey.length));
matchkey = null; // To break the loop.
}
}
return retStr;
};
Test:
var str = "yash yas $dfdas.**";
console.log('Index Matched replace : ', str.replaceMatch('as', '*', 2) );
console.log('Index Matched replace : ', str.replaceMatch('y', '~', 1) );
Output:
Index Matched replace : yash yas $dfd*.**
Index Matched replace : yash ~as $dfdas.**

I se this to make a string proper case, that is, the first letter is Upper Case and all the rest are lower case:
function toProperCase(someString){
return someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length));
};
This first thing done is to ensure ALL the string is lower case - someString.toLowerCase()
then it converts the very first character to upper case -someString.charAt(0).toUpperCase()
then it takes a substring of the remaining string less the first character -someString.toLowerCase().substring(1,someString.length))
then it concatenates the two and returns the new string -someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length))
New parameters could be added for the replacement character index and the replacement character, then two substrings formed and the indexed character replaced then concatenated in much the same way.

The solution does not work for negative index so I add a patch to it.
String.prototype.replaceAt=function(index, character) {
if(index>-1) return this.substr(0, index) + character + this.substr(index+character.length);
else return this.substr(0, this.length+index) + character + this.substr(index+character.length);
}

"hello world".replace(/(.{3})./, "$1h")
// 'helho world'

The methods on here are complicated.
I would do it this way:
var myString = "this is my string";
myString = myString.replace(myString.charAt(number goes here), "insert replacement here");
This is as simple as it gets.

Replacing dashes "-" with correctly guessed letter in Hangman game for javascript [duplicate]

I have a string, let's say Hello world and I need to replace the char at index 3. How can I replace a char by specifying a index?
var str = "hello world";
I need something like
str.replaceAt(0,"h");

In JavaScript, strings are immutable, which means the best you can do is to create a new string with the changed content and assign the variable to point to it.
You'll need to define the replaceAt() function yourself:
String.prototype.replaceAt = function(index, replacement) {
return this.substring(0, index) + replacement + this.substring(index + replacement.length);
}
And use it like this:
var hello = "Hello World";
alert(hello.replaceAt(2, "!!")); // He!!o World

There is no replaceAt function in JavaScript. You can use the following code to replace any character in any string at specified position:
function rep() {
var str = 'Hello World';
str = setCharAt(str,4,'a');
alert(str);
}
function setCharAt(str,index,chr) {
if(index > str.length-1) return str;
return str.substring(0,index) + chr + str.substring(index+1);
}
<button onclick="rep();">click</button>

You can't. Take the characters before and after the position and concat into a new string:
var s = "Hello world";
var index = 3;
s = s.substring(0, index) + 'x' + s.substring(index + 1);

str = str.split('');
str[3] = 'h';
str = str.join('');

There are lot of answers here, and all of them are based on two methods:
METHOD1: split the string using two substrings and stuff the character between them
METHOD2: convert the string to character array, replace one array member and join it
Personally, I would use these two methods in different cases. Let me explain.
#FabioPhms: Your method was the one I initially used and I was afraid that it is bad on string with lots of characters. However, question is what's a lot of characters? I tested it on 10 "lorem ipsum" paragraphs and it took a few milliseconds. Then I tested it on 10 times larger string - there was really no big difference. Hm.
#vsync, #Cory Mawhorter: Your comments are unambiguous; however, again, what is a large string? I agree that for 32...100kb performance should better and one should use substring-variant for this one operation of character replacement.
But what will happen if I have to make quite a few replacements?
I needed to perform my own tests to prove what is faster in that case. Let's say we have an algorithm that will manipulate a relatively short string that consists of 1000 characters. We expect that in average each character in that string will be replaced ~100 times. So, the code to test something like this is:
var str = "... {A LARGE STRING HERE} ...";
for(var i=0; i<100000; i++)
{
var n = '' + Math.floor(Math.random() * 10);
var p = Math.floor(Math.random() * 1000);
// replace character *n* on position *p*
}
I created a fiddle for this, and it's here.
There are two tests, TEST1 (substring) and TEST2 (array conversion).
Results:
TEST1: 195ms
TEST2: 6ms
It seems that array conversion beats substring by 2 orders of magnitude! So - what the hell happened here???
What actually happens is that all operations in TEST2 are done on array itself, using assignment expression like strarr2[p] = n. Assignment is really fast compared to substring on a large string, and its clear that it's going to win.
So, it's all about choosing the right tool for the job. Again.

Work with vectors is usually most effective to contact String.
I suggest the following function:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
Run this snippet:
String.prototype.replaceAt=function(index, char) {
var a = this.split("");
a[index] = char;
return a.join("");
}
var str = "hello world";
str = str.replaceAt(3, "#");
document.write(str);

In Javascript strings are immutable so you have to do something like
var x = "Hello world"
x = x.substring(0, i) + 'h' + x.substring(i+1);
To replace the character in x at i with 'h'

function dothis() {
var x = document.getElementById("x").value;
var index = document.getElementById("index").value;
var text = document.getElementById("text").value;
var length = document.getElementById("length").value;
var arr = x.split("");
arr.splice(index, length, text);
var result = arr.join("");
document.getElementById('output').innerHTML = result;
console.log(result);
}
dothis();
<input id="x" type="text" value="White Dog" placeholder="Enter Text" />
<input id="index" type="number" min="0"value="6" style="width:50px" placeholder="index" />
<input id="length" type="number" min="0"value="1" style="width:50px" placeholder="length" />
<input id="text" type="text" value="F" placeholder="New character" />
<br>
<button id="submit" onclick="dothis()">Run</button>
<p id="output"></p>
This method is good for small length strings but may be slow for larger text.
var x = "White Dog";
var arr = x.split(""); // ["W", "h", "i", "t", "e", " ", "D", "o", "g"]
arr.splice(6, 1, 'F');
/*
Here 6 is starting index and 1 is no. of array elements to remove and
final argument 'F' is the new character to be inserted.
*/
var result = arr.join(""); // "White Fog"

One-liner using String.replace with callback (no emoji support):
// 0 - index to replace, 'f' - replacement string
'dog'.replace(/./g, (c, i) => i == 0? 'f': c)
// "fog"
Explained:
//String.replace will call the callback on each pattern match
//in this case - each character
'dog'.replace(/./g, function (character, index) {
if (index == 0) //we want to replace the first character
return 'f'
return character //leaving other characters the same
})

Generalizing Afanasii Kurakin's answer, we have:
function replaceAt(str, index, ch) {
return str.replace(/./g, (c, i) => i == index ? ch : c);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
Let's expand and explain both the regular expression and the replacer function:
function replaceAt(str, index, newChar) {
function replacer(origChar, strIndex) {
if (strIndex === index)
return newChar;
else
return origChar;
}
return str.replace(/./g, replacer);
}
let str = 'Hello World';
str = replaceAt(str, 1, 'u');
console.log(str); // Hullo World
The regular expression . matches exactly one character. The g makes it match every character in a for loop. The replacer function is called given both the original character and the index of where that character is in the string. We make a simple if statement to determine if we're going to return either origChar or newChar.

var str = "hello world";
console.log(str);
var arr = [...str];
arr[0] = "H";
str = arr.join("");
console.log(str);

This works similar to Array.splice:
String.prototype.splice = function (i, j, str) {
return this.substr(0, i) + str + this.substr(j, this.length);
};

You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");

this is easily achievable with RegExp!
const str = 'Hello RegEx!';
const index = 11;
const replaceWith = 'p';
//'Hello RegEx!'.replace(/^(.{11})(.)/, `$1p`);
str.replace(new RegExp(`^(.{${ index }})(.)`), `$1${ replaceWith }`);
//< "Hello RegExp"

Using the spread syntax, you may convert the string to an array, assign the character at the given position, and convert back to a string:
const str = "hello world";
function replaceAt(s, i, c) {
const arr = [...s]; // Convert string to array
arr[i] = c; // Set char c at pos i
return arr.join(''); // Back to string
}
// prints "hallo world"
console.log(replaceAt(str, 1, 'a'));

You could try
var strArr = str.split("");
strArr[0] = 'h';
str = strArr.join("");
Check out this function for printing steps
steps(3)
// '# '
// '## '
// '###'
function steps(n, i = 0, arr = Array(n).fill(' ').join('')) {
if (i === n) {
return;
}
str = arr.split('');
str[i] = '#';
str = str.join('');
console.log(str);
steps(n, (i = i + 1), str);
}

#CemKalyoncu: Thanks for the great answer!
I also adapted it slightly to make it more like the Array.splice method (and took #Ates' note into consideration):
spliceString=function(string, index, numToDelete, char) {
return string.substr(0, index) + char + string.substr(index+numToDelete);
}
var myString="hello world!";
spliceString(myString,myString.lastIndexOf('l'),2,'mhole'); // "hello wormhole!"

If you want to replace characters in string, you should create mutable strings. These are essentially character arrays. You could create a factory:
function MutableString(str) {
var result = str.split("");
result.toString = function() {
return this.join("");
}
return result;
}
Then you can access the characters and the whole array converts to string when used as string:
var x = MutableString("Hello");
x[0] = "B"; // yes, we can alter the character
x.push("!"); // good performance: no new string is created
var y = "Hi, "+x; // converted to string: "Hi, Bello!"

You can extend the string type to include the inset method:
String.prototype.append = function (index,value) {
return this.slice(0,index) + value + this.slice(index);
};
var s = "New string";
alert(s.append(4,"complete "));
Then you can call the function:

You can concatenate using sub-string function at first select text before targeted index and after targeted index then concatenate with your potential char or string. This one is better
const myString = "Hello world";
const index = 3;
const stringBeforeIndex = myString.substring(0, index);
const stringAfterIndex = myString.substring(index + 1);
const replaceChar = "X";
myString = stringBeforeIndex + replaceChar + stringAfterIndex;
console.log("New string - ", myString)
or
const myString = "Hello world";
let index = 3;
myString = myString.substring(0, index) + "X" + myString.substring(index + 1);

I did a function that does something similar to what you ask, it checks if a character in string is in an array of not allowed characters if it is it replaces it with ''
var validate = function(value){
var notAllowed = [";","_",">","<","'","%","$","&","/","|",":","=","*"];
for(var i=0; i<value.length; i++){
if(notAllowed.indexOf(value.charAt(i)) > -1){
value = value.replace(value.charAt(i), "");
value = validate(value);
}
}
return value;
}

Here is a version I came up with if you want to style words or individual characters at their index in react/javascript.
replaceAt( yourArrayOfIndexes, yourString/orArrayOfStrings )
Working example: https://codesandbox.io/s/ov7zxp9mjq
function replaceAt(indexArray, [...string]) {
const replaceValue = i => string[i] = <b>{string[i]}</b>;
indexArray.forEach(replaceValue);
return string;
}
And here is another alternate method
function replaceAt(indexArray, [...string]) {
const startTag = '<b>';
const endTag = '</b>';
const tagLetter = i => string.splice(i, 1, startTag + string[i] + endTag);
indexArray.forEach(tagLetter);
return string.join('');
}
And another...
function replaceAt(indexArray, [...string]) {
for (let i = 0; i < indexArray.length; i++) {
string = Object.assign(string, {
[indexArray[i]]: <b>{string[indexArray[i]]}</b>
});
}
return string;
}

Here is my solution using the ternary and map operator. More readable, maintainable end easier to understand if you ask me.
It is more into es6 and best practices.
function replaceAt() {
const replaceAt = document.getElementById('replaceAt').value;
const str = 'ThisIsATestStringToReplaceCharAtSomePosition';
const newStr = Array.from(str).map((character, charIndex) => charIndex === (replaceAt - 1) ? '' : character).join('');
console.log(`New string: ${newStr}`);
}
<input type="number" id="replaceAt" min="1" max="44" oninput="replaceAt()"/>

My safe approach with negative indexes
/**
* #param {string} str
* #param {number} index
* #param {string} replacement
* #returns {string}
*/
static replaceAt (str, index, replacement)
{
if (index < 0) index = str.length + index
if (index < 0 || index >= str.length) throw new Error(`Index (${index}) out of bounds "${str}"`)
return str.substring(0, index) + replacement + str.substring(index + 1)
}
Use it like that:
replaceAt('my string', -1, 'G') // 'my strinG'
replaceAt('my string', 2, 'yy') // 'myyystring'
replaceAt('my string', 22, 'yy') // Uncaught Error: Index (22) out of bounds "my string"

Lets say you want to replace Kth index (0-based index) with 'Z'.
You could use Regex to do this.
var re = var re = new RegExp("((.){" + K + "})((.){1})")
str.replace(re, "$1A$`");

You can use the following function to replace Character or String at a particular position of a String. To replace all the following match cases use String.prototype.replaceAllMatches() function.
String.prototype.replaceMatch = function(matchkey, replaceStr, matchIndex) {
var retStr = this, repeatedIndex = 0;
for (var x = 0; (matchkey != null) && (retStr.indexOf(matchkey) > -1); x++) {
if (repeatedIndex == 0 && x == 0) {
repeatedIndex = retStr.indexOf(matchkey);
} else { // matchIndex > 0
repeatedIndex = retStr.indexOf(matchkey, repeatedIndex + 1);
}
if (x == matchIndex) {
retStr = retStr.substring(0, repeatedIndex) + replaceStr + retStr.substring(repeatedIndex + (matchkey.length));
matchkey = null; // To break the loop.
}
}
return retStr;
};
Test:
var str = "yash yas $dfdas.**";
console.log('Index Matched replace : ', str.replaceMatch('as', '*', 2) );
console.log('Index Matched replace : ', str.replaceMatch('y', '~', 1) );
Output:
Index Matched replace : yash yas $dfd*.**
Index Matched replace : yash ~as $dfdas.**

I se this to make a string proper case, that is, the first letter is Upper Case and all the rest are lower case:
function toProperCase(someString){
return someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length));
};
This first thing done is to ensure ALL the string is lower case - someString.toLowerCase()
then it converts the very first character to upper case -someString.charAt(0).toUpperCase()
then it takes a substring of the remaining string less the first character -someString.toLowerCase().substring(1,someString.length))
then it concatenates the two and returns the new string -someString.charAt(0).toUpperCase().concat(someString.toLowerCase().substring(1,someString.length))
New parameters could be added for the replacement character index and the replacement character, then two substrings formed and the indexed character replaced then concatenated in much the same way.

The solution does not work for negative index so I add a patch to it.
String.prototype.replaceAt=function(index, character) {
if(index>-1) return this.substr(0, index) + character + this.substr(index+character.length);
else return this.substr(0, this.length+index) + character + this.substr(index+character.length);
}

"hello world".replace(/(.{3})./, "$1h")
// 'helho world'

The methods on here are complicated.
I would do it this way:
var myString = "this is my string";
myString = myString.replace(myString.charAt(number goes here), "insert replacement here");
This is as simple as it gets.

How to add a space in a specific index of a string? [duplicate]

How can I insert a string at a specific index of another string?
var txt1 = "foo baz"
Suppose I want to insert "bar " after the "foo" how can I achieve that?
I thought of substring(), but there must be a simpler more straight forward way.

Inserting at a specific index (rather than, say, at the first space character) has to use string slicing/substring:
var txt2 = txt1.slice(0, 3) + "bar" + txt1.slice(3);

You could prototype your own splice() into String.
Polyfill
if (!String.prototype.splice) {
/**
* {JSDoc}
*
* The splice() method changes the content of a string by removing a range of
* characters and/or adding new characters.
*
* #this {String}
* #param {number} start Index at which to start changing the string.
* #param {number} delCount An integer indicating the number of old chars to remove.
* #param {string} newSubStr The String that is spliced in.
* #return {string} A new string with the spliced substring.
*/
String.prototype.splice = function(start, delCount, newSubStr) {
return this.slice(0, start) + newSubStr + this.slice(start + Math.abs(delCount));
};
}
Example
String.prototype.splice = function(idx, rem, str) {
return this.slice(0, idx) + str + this.slice(idx + Math.abs(rem));
};
var result = "foo baz".splice(4, 0, "bar ");
document.body.innerHTML = result; // "foo bar baz"
EDIT: Modified it to ensure that rem is an absolute value.

Here is a method I wrote that behaves like all other programming languages:
String.prototype.insert = function(index, string) {
if (index > 0)
{
return this.substring(0, index) + string + this.substring(index, this.length);
}
return string + this;
};
//Example of use:
var something = "How you?";
something = something.insert(3, " are");
console.log(something)
Reference:
http://coderamblings.wordpress.com/2012/07/09/insert-a-string-at-a-specific-index/

Just make the following function:
function insert(str, index, value) {
return str.substr(0, index) + value + str.substr(index);
}
and then use it like that:
alert(insert("foo baz", 4, "bar "));
Output: foo bar baz
It behaves exactly, like the C# (Sharp) String.Insert(int startIndex, string value).
NOTE: This insert function inserts the string value (third parameter) before the specified integer index (second parameter) in the string str (first parameter), and then returns the new string without changing str!

UPDATE 2016: Here is another just-for-fun (but more serious!) prototype function based on one-liner RegExp approach (with prepend support on undefined or negative index):
/**
* Insert `what` to string at position `index`.
*/
String.prototype.insert = function(what, index) {
return index > 0
? this.replace(new RegExp('.{' + index + '}'), '$&' + what)
: what + this;
};
console.log( 'foo baz'.insert('bar ', 4) ); // "foo bar baz"
console.log( 'foo baz'.insert('bar ') ); // "bar foo baz"
Previous (back to 2012) just-for-fun solution:
var index = 4,
what = 'bar ';
'foo baz'.replace(/./g, function(v, i) {
return i === index - 1 ? v + what : v;
}); // "foo bar baz"

This is basically doing what #Base33 is doing except I'm also giving the option of using a negative index to count from the end. Kind of like the substr method allows.
// use a negative index to insert relative to the end of the string.
String.prototype.insert = function (index, string) {
var ind = index < 0 ? this.length + index : index;
return this.substring(0, ind) + string + this.substr(ind);
};
Example:
Let's say you have full size images using a naming convention but can't update the data to also provide thumbnail urls.
var url = '/images/myimage.jpg';
var thumb = url.insert(-4, '_thm');
// result: '/images/myimage_thm.jpg'

If anyone is looking for a way to insert text at multiple indices in a string, try this out:
String.prototype.insertTextAtIndices = function(text) {
return this.replace(/./g, function(character, index) {
return text[index] ? text[index] + character : character;
});
};
For example, you can use this to insert <span> tags at certain offsets in a string:
var text = {
6: "<span>",
11: "</span>"
};
"Hello world!".insertTextAtIndices(text); // returns "Hello <span>world</span>!"

Instantiate an array from the string
Use Array#splice
Stringify again using Array#join
The benefits of this approach are two-fold:
Simple
Unicode code point compliant
const pair = Array.from('USDGBP')
pair.splice(3, 0, '/')
console.log(pair.join(''))

Given your current example you could achieve the result by either
var txt2 = txt1.split(' ').join(' bar ')
or
var txt2 = txt1.replace(' ', ' bar ');
but given that you can make such assumptions, you might as well skip directly to Gullen's example.
In a situation where you really can't make any assumptions other than character index-based, then I really would go for a substring solution.

my_string = "hello world";
my_insert = " dear";
my_insert_location = 5;
my_string = my_string.split('');
my_string.splice( my_insert_location , 0, my_insert );
my_string = my_string.join('');
https://jsfiddle.net/gaby_de_wilde/wz69nw9k/

I know this is an old thread, however, here is a really effective approach.
var tn = document.createTextNode("I am just to help")
t.insertData(10, "trying");
What's great about this is that it coerces the node content. So if this node were already on the DOM, you wouldn't need to use any query selectors or update the innerText. The changes would reflect due to its binding.
Were you to need a string, simply access the node's text content property.
tn.textContent
#=> "I am just trying to help"

You can do it easily with regexp in one line of code
const str = 'Hello RegExp!';
const index = 6;
const insert = 'Lovely ';
//'Hello RegExp!'.replace(/^(.{6})(.)/, `$1Lovely $2`);
const res = str.replace(new RegExp(`^(.{${index}})(.)`), `$1${insert}$2`);
console.log(res);
"Hello Lovely RegExp!"

Well, we can use both the substring and slice method.
String.prototype.customSplice = function (index, absIndex, string) {
return this.slice(0, index) + string+ this.slice(index + Math.abs(absIndex));
};
String.prototype.replaceString = function (index, string) {
if (index > 0)
return this.substring(0, index) + string + this.substr(index);
return string + this;
};
console.log('Hello Developers'.customSplice(6,0,'Stack ')) // Hello Stack Developers
console.log('Hello Developers'.replaceString(6,'Stack ')) //// Hello Stack Developers
The only problem of a substring method is that it won't work with a negative index. It's always take string index from 0th position.

You can use Regular Expressions with a dynamic pattern.
var text = "something";
var output = " ";
var pattern = new RegExp("^\\s{"+text.length+"}");
var output.replace(pattern,text);
outputs:
"something "
This replaces text.length of whitespace characters at the beginning of the string output.
The RegExp means ^\ - beginning of a line \s any white space character, repeated {n} times, in this case text.length. Use \\ to \ escape backslashes when building this kind of patterns out of strings.

another solution, cut the string in 2 and put a string in between.
var str = jQuery('#selector').text();
var strlength = str.length;
strf = str.substr(0 , strlength - 5);
strb = str.substr(strlength - 5 , 5);
jQuery('#selector').html(strf + 'inserted' + strb);

Using slice
You can use slice(0,index) + str + slice(index). Or you can create a method for it.
String.prototype.insertAt = function(index,str){
return this.slice(0,index) + str + this.slice(index)
}
console.log("foo bar".insertAt(4,'baz ')) //foo baz bar
Splice method for Strings
You can split() the main string and add then use normal splice()
String.prototype.splice = function(index,del,...newStrs){
let str = this.split('');
str.splice(index,del,newStrs.join('') || '');
return str.join('');
}
var txt1 = "foo baz"
//inserting single string.
console.log(txt1.splice(4,0,"bar ")); //foo bar baz
//inserting multiple strings
console.log(txt1.splice(4,0,"bar ","bar2 ")); //foo bar bar2 baz
//removing letters
console.log(txt1.splice(1,2)) //f baz
//remving and inseting atm
console.log(txt1.splice(1,2," bar")) //f bar baz
Applying splice() at multiple indexes
The method takes an array of arrays each element of array representing a single splice().
String.prototype.splice = function(index,del,...newStrs){
let str = this.split('');
str.splice(index,del,newStrs.join('') || '');
return str.join('');
}
String.prototype.mulSplice = function(arr){
str = this
let dif = 0;
arr.forEach(x => {
x[2] === x[2] || [];
x[1] === x[1] || 0;
str = str.splice(x[0] + dif,x[1],...x[2]);
dif += x[2].join('').length - x[1];
})
return str;
}
let txt = "foo bar baz"
//Replacing the 'foo' and 'bar' with 'something1' ,'another'
console.log(txt.splice(0,3,'something'))
console.log(txt.mulSplice(
[
[0,3,["something1"]],
[4,3,["another"]]
]
))

I wanted to compare the method using substring and the method using slice from Base33 and user113716 respectively, to do that I wrote some code
also have a look at this performance comparison, substring, slice
The code I used creates huge strings and inserts the string "bar " multiple times into the huge string
if (!String.prototype.splice) {
/**
* {JSDoc}
*
* The splice() method changes the content of a string by removing a range of
* characters and/or adding new characters.
*
* #this {String}
* #param {number} start Index at which to start changing the string.
* #param {number} delCount An integer indicating the number of old chars to remove.
* #param {string} newSubStr The String that is spliced in.
* #return {string} A new string with the spliced substring.
*/
String.prototype.splice = function (start, delCount, newSubStr) {
return this.slice(0, start) + newSubStr + this.slice(start + Math.abs(delCount));
};
}
String.prototype.splice = function (idx, rem, str) {
return this.slice(0, idx) + str + this.slice(idx + Math.abs(rem));
};
String.prototype.insert = function (index, string) {
if (index > 0)
return this.substring(0, index) + string + this.substring(index, this.length);
return string + this;
};
function createString(size) {
var s = ""
for (var i = 0; i < size; i++) {
s += "Some String "
}
return s
}
function testSubStringPerformance(str, times) {
for (var i = 0; i < times; i++)
str.insert(4, "bar ")
}
function testSpliceStringPerformance(str, times) {
for (var i = 0; i < times; i++)
str.splice(4, 0, "bar ")
}
function doTests(repeatMax, sSizeMax) {
n = 1000
sSize = 1000
for (var i = 1; i <= repeatMax; i++) {
var repeatTimes = n * (10 * i)
for (var j = 1; j <= sSizeMax; j++) {
var actualStringSize = sSize * (10 * j)
var s1 = createString(actualStringSize)
var s2 = createString(actualStringSize)
var start = performance.now()
testSubStringPerformance(s1, repeatTimes)
var end = performance.now()
var subStrPerf = end - start
start = performance.now()
testSpliceStringPerformance(s2, repeatTimes)
end = performance.now()
var splicePerf = end - start
console.log(
"string size =", "Some String ".length * actualStringSize, "\n",
"repeat count = ", repeatTimes, "\n",
"splice performance = ", splicePerf, "\n",
"substring performance = ", subStrPerf, "\n",
"difference = ", splicePerf - subStrPerf // + = splice is faster, - = subStr is faster
)
}
}
}
doTests(1, 100)
The general difference in performance is marginal at best and both methods work just fine (even on strings of length ~~ 12000000)

Take the solution. I have written this code in an easy format:
const insertWord = (sentence,word,index) => {
var sliceWord = word.slice(""),output = [],join; // Slicing the input word and declaring other variables
var sliceSentence = sentence.slice(""); // Slicing the input sentence into each alphabets
for (var i = 0; i < sliceSentence.length; i++)
{
if (i === index)
{ // checking if index of array === input index
for (var j = 0; j < word.length; j++)
{ // if yes we'll insert the word
output.push(sliceWord[j]); // Condition is true we are inserting the word
}
output.push(" "); // providing a single space at the end of the word
}
output.push(sliceSentence[i]); // pushing the remaining elements present in an array
}
join = output.join(""); // converting an array to string
console.log(join)
return join;
}

Prototype should be the best approach as many mentioned. Make sure that prototype comes earlier than where it is used.
String.prototype.insert = function (x, str) {
return (x > 0) ? this.substring(0, x) + str + this.substr(x) : str + this;
};

Javascript and regex: split string and keep the separator

I have a string:
var string = "aaaaaa<br />† bbbb<br />‡ cccc"
And I would like to split this string with the delimiter <br /> followed by a special character.
To do that, I am using this:
string.split(/<br \/>&#?[a-zA-Z0-9]+;/g);
I am getting what I need, except that I am losing the delimiter.
Here is the example: http://jsfiddle.net/JwrZ6/1/
How can I keep the delimiter?

I was having similar but slight different problem. Anyway, here are examples of three different scenarios for where to keep the deliminator.
"1、2、3".split("、") == ["1", "2", "3"]
"1、2、3".split(/(、)/g) == ["1", "、", "2", "、", "3"]
"1、2、3".split(/(?=、)/g) == ["1", "、2", "、3"]
"1、2、3".split(/(?!、)/g) == ["1、", "2、", "3"]
"1、2、3".split(/(.*?、)/g) == ["", "1、", "", "2、", "3"]
Warning: The fourth will only work to split single characters. ConnorsFan presents an alternative:
// Split a path, but keep the slashes that follow directories
var str = 'Animation/rawr/javascript.js';
var tokens = str.match(/[^\/]+\/?|\//g);

Use (positive) lookahead so that the regular expression asserts that the special character exists, but does not actually match it:
string.split(/<br \/>(?=&#?[a-zA-Z0-9]+;)/g);
See it in action:
var string = "aaaaaa<br />† bbbb<br />‡ cccc";
console.log(string.split(/<br \/>(?=&#?[a-zA-Z0-9]+;)/g));

If you wrap the delimiter in parantheses it will be part of the returned array.
string.split(/(<br \/>&#?[a-zA-Z0-9]+);/g);
// returns ["aaaaaa", "<br />†", "bbbb", "<br />‡", "cccc"]
Depending on which part you want to keep change which subgroup you match
string.split(/(<br \/>)&#?[a-zA-Z0-9]+;/g);
// returns ["aaaaaa", "<br />", "bbbb", "<br />", "cccc"]
You could improve the expression by ignoring the case of letters
string.split(/()&#?[a-z0-9]+;/gi);
And you can match for predefined groups like this: \d equals [0-9] and \w equals [a-zA-Z0-9_]. This means your expression could look like this.
string.split(/<br \/>(&#?[a-z\d]+;)/gi);
There is a good Regular Expression Reference on JavaScriptKit.

If you group the split pattern, its match will be kept in the output and it is by design:
If separator is a regular expression with capturing parentheses, then
each time separator matches, the results (including any undefined
results) of the capturing parentheses are spliced into the output
array.
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/split#description
You don't need a lookahead or global flag unless your search pattern uses one.
const str = `How much wood would a woodchuck chuck, if a woodchuck could chuck wood?`
const result = str.split(/(\s+)/);
console.log(result);
// We can verify the result
const isSame = result.join('') === str;
console.log({ isSame });
You can use multiple groups. You can be as creative as you like and what remains outside the groups will be removed:
const str = `How much wood would a woodchuck chuck, if a woodchuck could chuck wood?`
const result = str.split(/(\s+)(\w{1,2})\w+/);
console.log(result, result.join(''));

answered it here also JavaScript Split Regular Expression keep the delimiter
use the (?=pattern) lookahead pattern in the regex
example
var string = '500x500-11*90~1+1';
string = string.replace(/(?=[$-/:-?{-~!"^_`\[\]])/gi, ",");
string = string.split(",");
this will give you the following result.
[ '500x500', '-11', '*90', '~1', '+1' ]
Can also be directly split
string = string.split(/(?=[$-/:-?{-~!"^_`\[\]])/gi);
giving the same result
[ '500x500', '-11', '*90', '~1', '+1' ]

I made a modification to jichi's answer, and put it in a function which also supports multiple letters.
String.prototype.splitAndKeep = function(separator, method='seperate'){
var str = this;
if(method == 'seperate'){
str = str.split(new RegExp(`(${separator})`, 'g'));
}else if(method == 'infront'){
str = str.split(new RegExp(`(?=${separator})`, 'g'));
}else if(method == 'behind'){
str = str.split(new RegExp(`(.*?${separator})`, 'g'));
str = str.filter(function(el){return el !== "";});
}
return str;
};
jichi's answers 3rd method would not work in this function, so I took the 4th method, and removed the empty spaces to get the same result.
edit:
second method which excepts an array to split char1 or char2
String.prototype.splitAndKeep = function(separator, method='seperate'){
var str = this;
function splitAndKeep(str, separator, method='seperate'){
if(method == 'seperate'){
str = str.split(new RegExp(`(${separator})`, 'g'));
}else if(method == 'infront'){
str = str.split(new RegExp(`(?=${separator})`, 'g'));
}else if(method == 'behind'){
str = str.split(new RegExp(`(.*?${separator})`, 'g'));
str = str.filter(function(el){return el !== "";});
}
return str;
}
if(Array.isArray(separator)){
var parts = splitAndKeep(str, separator[0], method);
for(var i = 1; i < separator.length; i++){
var partsTemp = parts;
parts = [];
for(var p = 0; p < partsTemp.length; p++){
parts = parts.concat(splitAndKeep(partsTemp[p], separator[i], method));
}
}
return parts;
}else{
return splitAndKeep(str, separator, method);
}
};
usage:
str = "first1-second2-third3-last";
str.splitAndKeep(["1", "2", "3"]) == ["first", "1", "-second", "2", "-third", "3", "-last"];
str.splitAndKeep("-") == ["first1", "-", "second2", "-", "third3", "-", "last"];

An extension function splits string with substring or RegEx and the delimiter is putted according to second parameter ahead or behind.
String.prototype.splitKeep = function (splitter, ahead) {
var self = this;
var result = [];
if (splitter != '') {
var matches = [];
// Getting mached value and its index
var replaceName = splitter instanceof RegExp ? "replace" : "replaceAll";
var r = self[replaceName](splitter, function (m, i, e) {
matches.push({ value: m, index: i });
return getSubst(m);
});
// Finds split substrings
var lastIndex = 0;
for (var i = 0; i < matches.length; i++) {
var m = matches[i];
var nextIndex = ahead == true ? m.index : m.index + m.value.length;
if (nextIndex != lastIndex) {
var part = self.substring(lastIndex, nextIndex);
result.push(part);
lastIndex = nextIndex;
}
};
if (lastIndex < self.length) {
var part = self.substring(lastIndex, self.length);
result.push(part);
};
// Substitution of matched string
function getSubst(value) {
var substChar = value[0] == '0' ? '1' : '0';
var subst = '';
for (var i = 0; i < value.length; i++) {
subst += substChar;
}
return subst;
};
}
else {
result.add(self);
};
return result;
};
The test:
test('splitKeep', function () {
// String
deepEqual("1231451".splitKeep('1'), ["1", "231", "451"]);
deepEqual("123145".splitKeep('1', true), ["123", "145"]);
deepEqual("1231451".splitKeep('1', true), ["123", "145", "1"]);
deepEqual("hello man how are you!".splitKeep(' '), ["hello ", "man ", "how ", "are ", "you!"]);
deepEqual("hello man how are you!".splitKeep(' ', true), ["hello", " man", " how", " are", " you!"]);
// Regex
deepEqual("mhellommhellommmhello".splitKeep(/m+/g), ["m", "hellomm", "hellommm", "hello"]);
deepEqual("mhellommhellommmhello".splitKeep(/m+/g, true), ["mhello", "mmhello", "mmmhello"]);
});

I've been using this:
String.prototype.splitBy = function (delimiter) {
var
delimiterPATTERN = '(' + delimiter + ')',
delimiterRE = new RegExp(delimiterPATTERN, 'g');
return this.split(delimiterRE).reduce((chunks, item) => {
if (item.match(delimiterRE)){
chunks.push(item)
} else {
chunks[chunks.length - 1] += item
};
return chunks
}, [])
}
Except that you shouldn't mess with String.prototype, so here's a function version:
var splitBy = function (text, delimiter) {
var
delimiterPATTERN = '(' + delimiter + ')',
delimiterRE = new RegExp(delimiterPATTERN, 'g');
return text.split(delimiterRE).reduce(function(chunks, item){
if (item.match(delimiterRE)){
chunks.push(item)
} else {
chunks[chunks.length - 1] += item
};
return chunks
}, [])
}
So you could do:
var haystack = "aaaaaa<br />† bbbb<br />‡ cccc"
var needle = '<br \/>&#?[a-zA-Z0-9]+;';
var result = splitBy(haystack , needle)
console.log( JSON.stringify( result, null, 2) )
And you'll end up with:
[
"<br />† bbbb",
"<br />‡ cccc"
]

Most of the existing answers predate the introduction of lookbehind assertions in JavaScript in 2018. You didn't specify how you wanted the delimiters to be included in the result. One typical use case would be sentences delimited by punctuation ([.?!]), where one would want the delimiters to be included at the ends of the resulting strings. This corresponds to the fourth case in the accepted answer, but as noted there, that solution only works for single characters. Arbitrary strings with the delimiters appended at the end can be formed with a lookbehind assertion:
'It is. Is it? It is!'.split(/(?<=[.?!])/)
/* [ 'It is.', ' Is it?', ' It is!' ] */

I know that this is a bit late but you could also use lookarounds
var string = "aaaaaa<br />† bbbb<br />‡ cccc";
var array = string.split(/(?<=<br \/>)/);
console.log(array);

I've also came up with this solution. No regex needed, very readable.
const str = "hello world what a great day today balbla"
const separatorIndex = str.indexOf("great")
const parsedString = str.slice(separatorIndex)
console.log(parsedString)