I want to capture the browser window/tab close event.
I have tried the following with jQuery:
jQuery(window).bind(
"beforeunload",
function() {
return confirm("Do you really want to close?")
}
)
But it works on form submission as well, which is not what I want. I want an event that triggers only when the user closes the window.
The beforeunload event fires whenever the user leaves your page for any reason.
For example, it will be fired if the user submits a form, clicks a link, closes the window (or tab), or goes to a new page using the address bar, search box, or a bookmark.
You could exclude form submissions and hyperlinks (except from other frames) with the following code:
var inFormOrLink;
$('a').on('click', function() { inFormOrLink = true; });
$('form').on('submit', function() { inFormOrLink = true; });
$(window).on("beforeunload", function() {
return inFormOrLink ? "Do you really want to close?" : null;
})
For jQuery versions older than 1.7, try this:
var inFormOrLink;
$('a').live('click', function() { inFormOrLink = true; });
$('form').bind('submit', function() { inFormOrLink = true; });
$(window).bind("beforeunload", function() {
return inFormOrLink ? "Do you really want to close?" : null;
})
The live method doesn't work with the submit event, so if you add a new form, you'll need to bind the handler to it as well.
Note that if a different event handler cancels the submit or navigation, you will lose the confirmation prompt if the window is actually closed later. You could fix that by recording the time in the submit and click events, and checking if the beforeunload happens more than a couple of seconds later.
Maybe just unbind the beforeunload event handler within the form's submit event handler:
jQuery('form').submit(function() {
jQuery(window).unbind("beforeunload");
...
});
For a cross-browser solution (tested in Chrome 21, IE9, FF15), consider using the following code, which is a slightly tweaked version of Slaks' code:
var inFormOrLink;
$('a').live('click', function() { inFormOrLink = true; });
$('form').bind('submit', function() { inFormOrLink = true; });
$(window).bind('beforeunload', function(eventObject) {
var returnValue = undefined;
if (! inFormOrLink) {
returnValue = "Do you really want to close?";
}
eventObject.returnValue = returnValue;
return returnValue;
});
Note that since Firefox 4, the message "Do you really want to close?" is not displayed. FF just displays a generic message. See note in https://developer.mozilla.org/en-US/docs/DOM/window.onbeforeunload
window.onbeforeunload = function () {
return "Do you really want to close?";
};
My answer is aimed at providing simple benchmarks.
HOW TO
See #SLaks answer.
$(window).on("beforeunload", function() {
return inFormOrLink ? "Do you really want to close?" : null;
})
How long does the browser take to finally shut your page down?
Whenever an user closes the page (x button or CTRL + W), the browser executes the given beforeunload code, but not indefinitely. The only exception is the confirmation box (return 'Do you really want to close?) which will wait until for the user's response.
Chrome: 2 seconds.
Firefox: ∞ (or double click, or force on close)
Edge: ∞ (or double click)
Explorer 11: 0 seconds.
Safari: TODO
What we used to test this out:
A Node.js Express server with requests log
The following short HTML file
What it does is to send as many requests as it can before the browser shut downs its page (synchronously).
<html>
<body>
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.1.1/jquery.min.js"></script>
<script>
function request() {
return $.ajax({
type: "GET",
url: "http://localhost:3030/" + Date.now(),
async: true
}).responseText;
}
window.onbeforeunload = () => {
while (true) {
request();
}
return null;
}
</script>
</body>
</html>
Chrome output:
GET /1480451321041 404 0.389 ms - 32
GET /1480451321052 404 0.219 ms - 32
...
GET /hello/1480451322998 404 0.328 ms - 32
1957ms ≈ 2 seconds // we assume it's 2 seconds since requests can take few milliseconds to be sent.
For a solution that worked well with third party controls like Telerik (ex.: RadComboBox) and DevExpress that use the Anchor tags for various reasons, consider using the following code, which is a slightly tweaked version of desm's code with a better selector for self targeting anchor tags:
var inFormOrLink;
$('a[href]:not([target]), a[href][target=_self]').live('click', function() { inFormOrLink = true; });
$('form').bind('submit', function() { inFormOrLink = true; });
$(window).bind('beforeunload', function(eventObject) {
var returnValue = undefined;
if (! inFormOrLink) {
returnValue = "Do you really want to close?";
}
eventObject.returnValue = returnValue;
return returnValue;
});
I used Slaks answer but that wasn't working as is, since the onbeforeunload returnValue is parsed as a string and then displayed in the confirmations box of the browser. So the value true was displayed, like "true".
Just using return worked.
Here is my code
var preventUnloadPrompt;
var messageBeforeUnload = "my message here - Are you sure you want to leave this page?";
//var redirectAfterPrompt = "http://www.google.co.in";
$('a').live('click', function() { preventUnloadPrompt = true; });
$('form').live('submit', function() { preventUnloadPrompt = true; });
$(window).bind("beforeunload", function(e) {
var rval;
if(preventUnloadPrompt) {
return;
} else {
//location.replace(redirectAfterPrompt);
return messageBeforeUnload;
}
return rval;
})
Perhaps you could handle OnSubmit and set a flag that you later check in your OnBeforeUnload handler.
Unfortunately, whether it is a reload, new page redirect, or browser close the event will be triggered. An alternative is catch the id triggering the event and if it is form dont trigger any function and if it is not the id of the form then do what you want to do when the page closes. I am not sure if that is also possible directly and is tedious.
You can do some small things before the customer closes the tab. javascript detect browser close tab/close browser but if your list of actions are big and the tab closes before it is finished you are helpless. You can try it but with my experience donot depend on it.
window.addEventListener("beforeunload", function (e) {
var confirmationMessage = "\o/";
/* Do you small action code here */
(e || window.event).returnValue = confirmationMessage; //Gecko + IE
return confirmationMessage; //Webkit, Safari, Chrome
});
https://developer.mozilla.org/en-US/docs/Web/Reference/Events/beforeunload?redirectlocale=en-US&redirectslug=DOM/Mozilla_event_reference/beforeunload
jQuery(window).bind("beforeunload", function (e) {
var activeElementTagName = e.target.activeElement.tagName;
if (activeElementTagName != "A" && activeElementTagName != "INPUT") {
return "Do you really want to close?";
}
})
If your form submission takes them to another page (as I assume it does, hence the triggering of beforeunload), you could try to change your form submission to an ajax call. This way, they won't leave your page when they submit the form and you can use your beforeunload binding code as you wish.
As of jQuery 1.7, the .live() method is deprecated. Use .on() to attach event handlers. Users of older versions of jQuery should use .delegate() in preference to .live()
$(window).bind("beforeunload", function() {
return true || confirm("Do you really want to close?");
});
on complete or link
$(window).unbind();
Try this also
window.onbeforeunload = function ()
{
if (pasteEditorChange) {
var btn = confirm('Do You Want to Save the Changess?');
if(btn === true ){
SavetoEdit();//your function call
}
else{
windowClose();//your function call
}
} else {
windowClose();//your function call
}
};
My Issue: The 'onbeforeunload' event would only be triggered if there were odd number of submits(clicks). I had a combination of solutions from similar threads in SO to have my solution work. well my code will speak.
<!--The definition of event and initializing the trigger flag--->
$(document).ready(function() {
updatefgallowPrompt(true);
window.onbeforeunload = WarnUser;
}
function WarnUser() {
var allowPrompt = getfgallowPrompt();
if(allowPrompt) {
saveIndexedDataAlert();
return null;
} else {
updatefgallowPrompt(true);
event.stopPropagation
}
}
<!--The method responsible for deciding weather the unload event is triggered from submit or not--->
function saveIndexedDataAlert() {
var allowPrompt = getfgallowPrompt();
var lenIndexedDocs = parseInt($('#sortable3 > li').size()) + parseInt($('#sortable3 > ul').size());
if(allowPrompt && $.trim(lenIndexedDocs) > 0) {
event.returnValue = "Your message";
} else {
event.returnValue = " ";
updatefgallowPrompt(true);
}
}
<!---Function responsible to reset the trigger flag---->
$(document).click(function(event) {
$('a').live('click', function() { updatefgallowPrompt(false); });
});
<!--getter and setter for the flag---->
function updatefgallowPrompt (allowPrompt){ //exit msg dfds
$('body').data('allowPrompt', allowPrompt);
}
function getfgallowPrompt(){
return $('body').data('allowPrompt');
}
Just verify...
function wopen_close(){
var w = window.open($url, '_blank', 'width=600, height=400, scrollbars=no, status=no, resizable=no, screenx=0, screeny=0');
w.onunload = function(){
if (window.closed) {
alert("window closed");
}else{
alert("just refreshed");
}
}
}
var validNavigation = false;
jQuery(document).ready(function () {
wireUpEvents();
});
function endSession() {
// Browser or broswer tab is closed
// Do sth here ...
alert("bye");
}
function wireUpEvents() {
/*
* For a list of events that triggers onbeforeunload on IE
* check http://msdn.microsoft.com/en-us/library/ms536907(VS.85).aspx
*/
window.onbeforeunload = function () {
debugger
if (!validNavigation) {
endSession();
}
}
// Attach the event keypress to exclude the F5 refresh
$(document).bind('keypress', function (e) {
debugger
if (e.keyCode == 116) {
validNavigation = true;
}
});
// Attach the event click for all links in the page
$("a").bind("click", function () {
debugger
validNavigation = true;
});
// Attach the event submit for all forms in the page
$("form").bind("submit", function () {
debugger
validNavigation = true;
});
// Attach the event click for all inputs in the page
$("input[type=submit]").bind("click", function () {
debugger
validNavigation = true;
});
}`enter code here`
Following worked for me;
$(window).unload(function(event) {
if(event.clientY < 0) {
//do whatever you want when closing the window..
}
});
How do you definitively detect whether or not the user has pressed the back button in the browser?
How do you enforce the use of an in-page back button inside a single page web application using a #URL system?
Why on earth don't browser back buttons fire their own events!?
(Note: As per Sharky's feedback, I've included code to detect backspaces)
So, I've seen these questions frequently on SO, and have recently run into the issue of controlling back button functionality myself. After a few days of searching for the best solution for my application (Single-Page with Hash Navigation), I've come up with a simple, cross-browser, library-less system for detecting the back button.
Most people recommend using:
window.onhashchange = function() {
//blah blah blah
}
However, this function will also be called when a user uses on in-page element that changes the location hash. Not the best user experience when your user clicks and the page goes backwards or forwards.
To give you a general outline of my system, I'm filling up an array with previous hashes as my user moves through the interface. It looks something like this:
function updateHistory(curr) {
window.location.lasthash.push(window.location.hash);
window.location.hash = curr;
}
Pretty straight forward. I do this to ensure cross-browser support, as well as support for older browsers. Simply pass the new hash to the function, and it'll store it for you and then change the hash (which is then put into the browser's history).
I also utilise an in-page back button that moves the user between pages using the lasthash array. It looks like this:
function goBack() {
window.location.hash = window.location.lasthash[window.location.lasthash.length-1];
//blah blah blah
window.location.lasthash.pop();
}
So this will move the user back to the last hash, and remove that last hash from the array (I have no forward button right now).
So. How do I detect whether or not a user has used my in-page back button, or the browser button?
At first I looked at window.onbeforeunload, but to no avail - that is only called if the user is going to change pages. This does not happen in a single-page-application using hash navigation.
So, after some more digging, I saw recommendations for trying to set a flag variable. The issue with this in my case, is that I would try to set it, but as everything is asynchronous, it wouldn't always be set in time for the if statement in the hash change. .onMouseDown wasn't always called in click, and adding it to an onclick wouldn't ever trigger it fast enough.
This is when I started to look at the difference between document, and window. My final solution was to set the flag using document.onmouseover, and disable it using document.onmouseleave.
What happens is that while the user's mouse is inside the document area (read: the rendered page, but excluding the browser frame), my boolean is set to true. As soon as the mouse leaves the document area, the boolean flips to false.
This way, I can change my window.onhashchange to:
window.onhashchange = function() {
if (window.innerDocClick) {
window.innerDocClick = false;
} else {
if (window.location.hash != '#undefined') {
goBack();
} else {
history.pushState("", document.title, window.location.pathname);
location.reload();
}
}
}
You'll note the check for #undefined. This is because if there is no history available in my array, it returns undefined. I use this to ask the user if they want to leave using a window.onbeforeunload event.
So, in short, and for people that aren't necessarily using an in-page back button or an array to store the history:
document.onmouseover = function() {
//User's mouse is inside the page.
window.innerDocClick = true;
}
document.onmouseleave = function() {
//User's mouse has left the page.
window.innerDocClick = false;
}
window.onhashchange = function() {
if (window.innerDocClick) {
//Your own in-page mechanism triggered the hash change
} else {
//Browser back button was clicked
}
}
And there you have it. a simple, three-part way to detect back button usage vs in-page elements with regards to hash navigation.
EDIT:
To ensure that the user doesn't use backspace to trigger the back event, you can also include the following (Thanks to #thetoolman on this Question):
$(function(){
/*
* this swallows backspace keys on any non-input element.
* stops backspace -> back
*/
var rx = /INPUT|SELECT|TEXTAREA/i;
$(document).bind("keydown keypress", function(e){
if( e.which == 8 ){ // 8 == backspace
if(!rx.test(e.target.tagName) || e.target.disabled || e.target.readOnly ){
e.preventDefault();
}
}
});
});
You can try popstate event handler, e.g:
window.addEventListener('popstate', function(event) {
// The popstate event is fired each time when the current history entry changes.
var r = confirm("You pressed a Back button! Are you sure?!");
if (r == true) {
// Call Back button programmatically as per user confirmation.
history.back();
// Uncomment below line to redirect to the previous page instead.
// window.location = document.referrer // Note: IE11 is not supporting this.
} else {
// Stay on the current page.
history.pushState(null, null, window.location.pathname);
}
history.pushState(null, null, window.location.pathname);
}, false);
Note: For the best results, you should load this code only on specific pages where you want to implement the logic to avoid any other unexpected issues.
The popstate event is fired each time when the current history entry changes (user navigates to a new state). That happens when user clicks on browser's Back/Forward buttons or when history.back(), history.forward(), history.go() methods are programatically called.
The event.state is property of the event is equal to the history state object.
For jQuery syntax, wrap it around (to add even listener after document is ready):
(function($) {
// Above code here.
})(jQuery);
See also: window.onpopstate on page load
See also the examples on Single-Page Apps and HTML5 pushState page:
<script>
// jQuery
$(window).on('popstate', function (e) {
var state = e.originalEvent.state;
if (state !== null) {
//load content with ajax
}
});
// Vanilla javascript
window.addEventListener('popstate', function (e) {
var state = e.state;
if (state !== null) {
//load content with ajax
}
});
</script>
This should be compatible with Chrome 5+, Firefox 4+, IE 10+, Safari 6+, Opera 11.5+ and similar.
if (window.performance && window.performance.navigation.type == window.performance.navigation.TYPE_BACK_FORWARD) {
alert('hello world');
}
This is the only one solution that worked for me (it's not a onepage website).
It's working with Chrome, Firefox and Safari.
I had been struggling with this requirement for quite a while and took some of the solutions above to implement it. However, I stumbled upon an observation and it seems to work across Chrome, Firefox and Safari browsers + Android and iPhone
On page load:
window.history.pushState({page: 1}, "", "");
window.onpopstate = function(event) {
// "event" object seems to contain value only when the back button is clicked
// and if the pop state event fires due to clicks on a button
// or a link it comes up as "undefined"
if(event){
// Code to handle back button or prevent from navigation
}
else{
// Continue user action through link or button
}
}
Let me know if this helps. If am missing something, I will be happy to understand.
In javascript, navigation type 2 means browser's back or forward button clicked and the browser is actually taking content from cache.
if(performance.navigation.type == 2)
{
//Do your code here
}
Correct answer is already there to answer the question. I want to mention new JavaScript API PerformanceNavigationTiming, it's replacing deprecated performance.navigation.
Following code will log in console "back_forward" if user landed on your page using back or forward button. Take a look at compatibility table before using it in your project.
var perfEntries = performance.getEntriesByType("navigation");
for (var i = 0; i < perfEntries.length; i++) {
console.log(perfEntries[i].type);
}
This will definitely work (For detecting back button click)
$(window).on('popstate', function(event) {
alert("pop");
});
My variant:
const inFromBack = performance && performance.getEntriesByType( 'navigation' ).map( nav => nav.type ).includes( 'back_forward' )
Browser: https://jsfiddle.net/Limitlessisa/axt1Lqoz/
For mobile control: https://jsfiddle.net/Limitlessisa/axt1Lqoz/show/
$(document).ready(function() {
$('body').on('click touch', '#share', function(e) {
$('.share').fadeIn();
});
});
// geri butonunu yakalama
window.onhashchange = function(e) {
var oldURL = e.oldURL.split('#')[1];
var newURL = e.newURL.split('#')[1];
if (oldURL == 'share') {
$('.share').fadeOut();
e.preventDefault();
return false;
}
//console.log('old:'+oldURL+' new:'+newURL);
}
.share{position:fixed; display:none; top:0; left:0; width:100%; height:100%; background:rgba(0,0,0,.8); color:white; padding:20px;
<!DOCTYPE html>
<html>
<head>
<title>Back Button Example</title>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>
</head>
<body style="text-align:center; padding:0;">
Share
<div class="share" style="">
<h1>Test Page</h1>
<p> Back button press please for control.</p>
</div>
</body>
</html>
See this:
history.pushState(null, null, location.href);
window.onpopstate = function () {
history.go(1);
};
it works fine...
I was able to use some of the answers in this thread and others to get it working in IE and Chrome/Edge. history.pushState for me wasn't supported in IE11.
if (history.pushState) {
//Chrome and modern browsers
history.pushState(null, document.title, location.href);
window.addEventListener('popstate', function (event) {
history.pushState(null, document.title, location.href);
});
}
else {
//IE
history.forward();
}
A full-fledged component can be implemented only if you redefine the API (change the methods of object ' history ')
I will share the class just written.
Tested on Chrome and Mozilla
Support only HTML5 and ECMAScript5-6
class HistoryNavigation {
static init()
{
if(HistoryNavigation.is_init===true){
return;
}
HistoryNavigation.is_init=true;
let history_stack=[];
let n=0;
let current_state={timestamp:Date.now()+n};
n++;
let init_HNState;
if(history.state!==null){
current_state=history.state.HNState;
history_stack=history.state.HNState.history_stack;
init_HNState=history.state.HNState;
} else {
init_HNState={timestamp:current_state.timestamp,history_stack};
}
let listenerPushState=function(params){
params=Object.assign({state:null},params);
params.state=params.state!==null?Object.assign({},params.state):{};
let h_state={ timestamp:Date.now()+n};
n++;
let key = history_stack.indexOf(current_state.timestamp);
key=key+1;
history_stack.splice(key);
history_stack.push(h_state.timestamp);
h_state.history_stack=history_stack;
params.state.HNState=h_state;
current_state=h_state;
return params;
};
let listenerReplaceState=function(params){
params=Object.assign({state:null},params);
params.state=params.state!==null?Object.assign({},params.state):null;
let h_state=Object.assign({},current_state);
h_state.history_stack=history_stack;
params.state.HNState=h_state;
return params;
};
let desc=Object.getOwnPropertyDescriptors(History.prototype);
delete desc.constructor;
Object.defineProperties(History.prototype,{
replaceState:Object.assign({},desc.replaceState,{
value:function(state,title,url){
let params={state,title,url};
HistoryNavigation.dispatchEvent('history.state.replace',params);
params=Object.assign({state,title,url},params);
params=listenerReplaceState(params);
desc.replaceState.value.call(this,params.state,params.title,params.url);
}
}),
pushState:Object.assign({},desc.pushState,{
value:function(state,title,url){
let params={state,title,url};
HistoryNavigation.dispatchEvent('history.state.push',params);
params=Object.assign({state,title,url},params);
params=listenerPushState(params);
return desc.pushState.value.call(this, params.state, params.title, params.url);
}
})
});
HistoryNavigation.addEventListener('popstate',function(event){
let HNState;
if(event.state==null){
HNState=init_HNState;
} else {
HNState=event.state.HNState;
}
let key_prev=history_stack.indexOf(current_state.timestamp);
let key_state=history_stack.indexOf(HNState.timestamp);
let delta=key_state-key_prev;
let params={delta,event,state:Object.assign({},event.state)};
delete params.state.HNState;
HNState.history_stack=history_stack;
if(event.state!==null){
event.state.HNState=HNState;
}
current_state=HNState;
HistoryNavigation.dispatchEvent('history.go',params);
});
}
static addEventListener(...arg)
{
window.addEventListener(...arg);
}
static removeEventListener(...arg)
{
window.removeEventListener(...arg);
}
static dispatchEvent(event,params)
{
if(!(event instanceof Event)){
event=new Event(event,{cancelable:true});
}
event.params=params;
window.dispatchEvent(event);
};
}
HistoryNavigation.init();
// exemple
HistoryNavigation.addEventListener('popstate',function(event){
console.log('Will not start because they blocked the work');
});
HistoryNavigation.addEventListener('history.go',function(event){
event.params.event.stopImmediatePropagation();// blocked popstate listeners
console.log(event.params);
// back or forward - see event.params.delta
});
HistoryNavigation.addEventListener('history.state.push',function(event){
console.log(event);
});
HistoryNavigation.addEventListener('history.state.replace',function(event){
console.log(event);
});
history.pushState({h:'hello'},'','');
history.pushState({h:'hello2'},'','');
history.pushState({h:'hello3'},'','');
history.back();
```
Here's my take at it. The assumption is, when the URL changes but there has no click within the document detected, it's a browser back (yes, or forward). A users click is reset after 2 seconds to make this work on pages that load content via Ajax:
(function(window, $) {
var anyClick, consoleLog, debug, delay;
delay = function(sec, func) {
return setTimeout(func, sec * 1000);
};
debug = true;
anyClick = false;
consoleLog = function(type, message) {
if (debug) {
return console[type](message);
}
};
$(window.document).click(function() {
anyClick = true;
consoleLog("info", "clicked");
return delay(2, function() {
consoleLog("info", "reset click state");
return anyClick = false;
});
});
return window.addEventListener("popstate", function(e) {
if (anyClick !== true) {
consoleLog("info", "Back clicked");
return window.dataLayer.push({
event: 'analyticsEvent',
eventCategory: 'test',
eventAction: 'test'
});
}
});
})(window, jQuery);
The document.mouseover does not work for IE and FireFox.
However I have tried this :
$(document).ready(function () {
setInterval(function () {
var $sample = $("body");
if ($sample.is(":hover")) {
window.innerDocClick = true;
} else {
window.innerDocClick = false;
}
});
});
window.onhashchange = function () {
if (window.innerDocClick) {
//Your own in-page mechanism triggered the hash change
} else {
//Browser back or forward button was pressed
}
};
This works for Chrome and IE and not FireFox. Still working to get FireFox right. Any easy way on detecting Browser back/forward button click are welcome, not particularly in JQuery but also AngularJS or plain Javascript.
I solved it by keeping track of the original event that triggered the hashchange (be it a swipe, a click or a wheel), so that the event wouldn't be mistaken for a simple landing-on-page, and using an additional flag in each of my event bindings. The browser won't set the flag again to false when hitting the back button:
var evt = null,
canGoBackToThePast = true;
$('#next-slide').on('click touch', function(e) {
evt = e;
canGobackToThePast = false;
// your logic (remember to set the 'canGoBackToThePast' flag back to 'true' at the end of it)
}
<input style="display:none" id="__pageLoaded" value=""/>
$(document).ready(function () {
if ($("#__pageLoaded").val() != 1) {
$("#__pageLoaded").val(1);
} else {
shared.isBackLoad = true;
$("#__pageLoaded").val(1);
// Call any function that handles your back event
}
});
The above code worked for me. On mobile browsers, when the user clicked on the back button, we wanted to restore the page state as per his previous visit.
Solution for Kotlin/JS (React):
import org.w3c.dom.events.Event
import kotlin.browser.document
import kotlin.browser.window
...
override fun componentDidMount() {
window.history.pushState(null, document.title, window.location.href)
window.addEventListener("popstate", actionHandler)
}
...
val actionHandler: (Event?) -> Unit = {
window.history.pushState(
null,
document.title,
window.location.href
)
// add your actions here
}
Was looking for a solution for this issue and put together a simple skeleton test html based on a few answers here and the MDN Web Doc pages for History.pushState() and WindowEventHandlers.onpopstate.
The following HTML and JavaScript is easy enough to copy and paste and test.
Works with back and forward browser buttons, shortcut keys, adds a change to the URL (which is important in some cases).
Simply enough to add to existing code key points and should be expandable too.
<html>
<body>
<div id="p1">Option 1</div>
<div id="p2">Option 2</div>
<div id="p3">Option 3</div>
<div id="p4">Option 4</div>
<div id="c"></div>
<script>
var chg={
set:function(str){
var d=document.getElementById("c");
d.textContent=str;
},
go:function(e){
var s={"p":this.id};
chg.set(s.p);
hstry.add(s);
}
};
var hstry={
add:function(s){
var u=new URL(window.location);
u.searchParams.set("x",s.p);
window.history.pushState(s,"",u);
},
adjust:function(state){
if(state.p){
chg.set(state.p);
}
}
};
window.onpopstate=function(e){
console.log("popstate, e.state:["+ JSON.stringify(e.state) +"]");
hstry.adjust(e.state);
}
window.onload=function(){
var i,d,a=["p1","p2","p3","p4"];
for(i=0;i<a.length;i++){
d=document.getElementById(a[i]);
d.addEventListener("click",chg.go,false);
}
}
</script>
</body>
</html>
browser will emit popstate event if you navigate through your app with calling
window.history.pushState({},'','/to')
If you manually enter the addresses into the address bar and click on the back button, popstate event will NOT be fired.
If you navigate in your app with this simplified function
const navigate = (to) => {
window.history.pushState({}, ",", to);
};
then this will work
const handlePopstate = () => {
console.log("popped");
};
window.addEventListener("popstate", handlePopstate);
I tried the above options but none of them is working for me. Here is the solution
if(window.event)
{
if(window.event.clientX < 40 && window.event.clientY < 0)
{
alert("Browser back button is clicked...");
}
else
{
alert("Browser refresh button is clicked...");
}
}
Refer this link http://www.codeproject.com/Articles/696526/Solution-to-Browser-Back-Button-Click-Event-Handli for more details