Develop Reference

angular get and set atributes via service

i can't find a solution to this, basicly everytime i do a login, i want to store the user that i get from the node end point in the service, after that in my main Controller i should get the name of the user, but that never happen, dunno why
here is the code:
app.controller('MainCtrl', function ($scope, $state,$location,$http,user) {
$scope.user = {
nome: user.getProperty()
};
$scope.showRegister = function () {
$state.go('register');
}
$scope.showLogin = function () {
$state.go('login');
}
});
app.controller('loginController', function ($scope, $http, $state,user) {
$scope.login = function () {
var data = {};
data.password = $scope.loja.password;
data.email = $scope.loja.email;
$http.post('http://localhost:8080/login/',data)
.success(function (data) {
console.log(data);
user.setProperty(data.nome);
$state.go('home');
})
.error(function (statusText) {
console.log("failed");
});
}
});
user service
app.service('user', function () {
var property = {};
return {
getProperty: function () {
return property.nome;
},
setProperty: function (value) {
property.nome = value;
}
};
});

You could just watch your service for changes by adding this code to your MainCtrl:
$scope.$watch(function () { return user.getProperty();}, updateProp, true);
function updateProp(newValue, oldValue) {
$scope.user = {
nome: newValue
};
}
updateProp gets executed everytime the value of user.getProperty() changes.

Your main issue is with your MainCtrl . In the initial execution of MainCtrl there is no value set into your service so its get blank. MainCtrl executes before setting the value in the service.
$scope.user = {
nome: user.getProperty()
};
this code should be executed after setting the value in the service but it executes in the initialization of controller.
You can get the reference from the fiddle below.
http://jsfiddle.net/ADukg/9799/

How to cancel a promise in angularjs? [duplicate]

Given a Ajax request in AngularJS
$http.get("/backend/").success(callback);
what is the most effective way to cancel that request if another request is launched (same backend, different parameters for instance).

This feature was added to the 1.1.5 release via a timeout parameter:
var canceler = $q.defer();
$http.get('/someUrl', {timeout: canceler.promise}).success(successCallback);
// later...
canceler.resolve(); // Aborts the $http request if it isn't finished.

Cancelling Angular $http Ajax with the timeout property doesn't work in Angular 1.3.15.
For those that cannot wait for this to be fixed I'm sharing a jQuery Ajax solution wrapped in Angular.
The solution involves two services:
HttpService (a wrapper around the jQuery Ajax function);
PendingRequestsService (tracks the pending/open Ajax requests)
Here goes the PendingRequestsService service:
(function (angular) {
'use strict';
var app = angular.module('app');
app.service('PendingRequestsService', ["$log", function ($log) {
var $this = this;
var pending = [];
$this.add = function (request) {
pending.push(request);
};
$this.remove = function (request) {
pending = _.filter(pending, function (p) {
return p.url !== request;
});
};
$this.cancelAll = function () {
angular.forEach(pending, function (p) {
p.xhr.abort();
p.deferred.reject();
});
pending.length = 0;
};
}]);})(window.angular);
The HttpService service:
(function (angular) {
'use strict';
var app = angular.module('app');
app.service('HttpService', ['$http', '$q', "$log", 'PendingRequestsService', function ($http, $q, $log, pendingRequests) {
this.post = function (url, params) {
var deferred = $q.defer();
var xhr = $.ASI.callMethod({
url: url,
data: params,
error: function() {
$log.log("ajax error");
}
});
pendingRequests.add({
url: url,
xhr: xhr,
deferred: deferred
});
xhr.done(function (data, textStatus, jqXhr) {
deferred.resolve(data);
})
.fail(function (jqXhr, textStatus, errorThrown) {
deferred.reject(errorThrown);
}).always(function (dataOrjqXhr, textStatus, jqXhrErrorThrown) {
//Once a request has failed or succeeded, remove it from the pending list
pendingRequests.remove(url);
});
return deferred.promise;
}
}]);
})(window.angular);
Later in your service when you are loading data you would use the HttpService instead of $http:
(function (angular) {
angular.module('app').service('dataService', ["HttpService", function (httpService) {
this.getResources = function (params) {
return httpService.post('/serverMethod', { param: params });
};
}]);
})(window.angular);
Later in your code you would like to load the data:
(function (angular) {
var app = angular.module('app');
app.controller('YourController', ["DataService", "PendingRequestsService", function (httpService, pendingRequestsService) {
dataService
.getResources(params)
.then(function (data) {
// do stuff
});
...
// later that day cancel requests
pendingRequestsService.cancelAll();
}]);
})(window.angular);

Cancelation of requests issued with $http is not supported with the current version of AngularJS. There is a pull request opened to add this capability but this PR wasn't reviewed yet so it is not clear if its going to make it into AngularJS core.

If you want to cancel pending requests on stateChangeStart with ui-router, you can use something like this:
// in service
var deferred = $q.defer();
var scope = this;
$http.get(URL, {timeout : deferred.promise, cancel : deferred}).success(function(data){
//do something
deferred.resolve(dataUsage);
}).error(function(){
deferred.reject();
});
return deferred.promise;
// in UIrouter config
$rootScope.$on('$stateChangeStart', function (event, toState, toParams, fromState, fromParams) {
//To cancel pending request when change state
angular.forEach($http.pendingRequests, function(request) {
if (request.cancel && request.timeout) {
request.cancel.resolve();
}
});
});

For some reason config.timeout doesn't work for me. I used this approach:
let cancelRequest = $q.defer();
let cancelPromise = cancelRequest.promise;
let httpPromise = $http.get(...);
$q.race({ cancelPromise, httpPromise })
.then(function (result) {
...
});
And cancelRequest.resolve() to cancel. Actually it doesn't not cancel a request but you don't get unnecessary response at least.
Hope this helps.

This enhances the accepted answer by decorating the $http service with an abort method as follows ...
'use strict';
angular.module('admin')
.config(["$provide", function ($provide) {
$provide.decorator('$http', ["$delegate", "$q", function ($delegate, $q) {
var getFn = $delegate.get;
var cancelerMap = {};
function getCancelerKey(method, url) {
var formattedMethod = method.toLowerCase();
var formattedUrl = encodeURI(url).toLowerCase().split("?")[0];
return formattedMethod + "~" + formattedUrl;
}
$delegate.get = function () {
var cancelerKey, canceler, method;
var args = [].slice.call(arguments);
var url = args[0];
var config = args[1] || {};
if (config.timeout == null) {
method = "GET";
cancelerKey = getCancelerKey(method, url);
canceler = $q.defer();
cancelerMap[cancelerKey] = canceler;
config.timeout = canceler.promise;
args[1] = config;
}
return getFn.apply(null, args);
};
$delegate.abort = function (request) {
console.log("aborting");
var cancelerKey, canceler;
cancelerKey = getCancelerKey(request.method, request.url);
canceler = cancelerMap[cancelerKey];
if (canceler != null) {
console.log("aborting", cancelerKey);
if (request.timeout != null && typeof request.timeout !== "number") {
canceler.resolve();
delete cancelerMap[cancelerKey];
}
}
};
return $delegate;
}]);
}]);
WHAT IS THIS CODE DOING?
To cancel a request a "promise" timeout must be set.
If no timeout is set on the HTTP request then the code adds a "promise" timeout.
(If a timeout is set already then nothing is changed).
However, to resolve the promise we need a handle on the "deferred".
We thus use a map so we can retrieve the "deferred" later.
When we call the abort method, the "deferred" is retrieved from the map and then we call the resolve method to cancel the http request.
Hope this helps someone.
LIMITATIONS
Currently this only works for $http.get but you can add code for $http.post and so on
HOW TO USE ...
You can then use it, for example, on state change, as follows ...
rootScope.$on('$stateChangeStart', function (event, toState, toParams) {
angular.forEach($http.pendingRequests, function (request) {
$http.abort(request);
});
});

here is a version that handles multiple requests, also checks for cancelled status in callback to suppress errors in error block. (in Typescript)
controller level:
requests = new Map<string, ng.IDeferred<{}>>();
in my http get:
getSomething(): void {
let url = '/api/someaction';
this.cancel(url); // cancel if this url is in progress
var req = this.$q.defer();
this.requests.set(url, req);
let config: ng.IRequestShortcutConfig = {
params: { id: someId}
, timeout: req.promise // <--- promise to trigger cancellation
};
this.$http.post(url, this.getPayload(), config).then(
promiseValue => this.updateEditor(promiseValue.data as IEditor),
reason => {
// if legitimate exception, show error in UI
if (!this.isCancelled(req)) {
this.showError(url, reason)
}
},
).finally(() => { });
}
helper methods
cancel(url: string) {
this.requests.forEach((req,key) => {
if (key == url)
req.resolve('cancelled');
});
this.requests.delete(url);
}
isCancelled(req: ng.IDeferred<{}>) {
var p = req.promise as any; // as any because typings are missing $$state
return p.$$state && p.$$state.value == 'cancelled';
}
now looking at the network tab, i see that it works beatuifully. i called the method 4 times and only the last one went through.

You can add a custom function to the $http service using a "decorator" that would add the abort() function to your promises.
Here's some working code:
app.config(function($provide) {
$provide.decorator('$http', function $logDecorator($delegate, $q) {
$delegate.with_abort = function(options) {
let abort_defer = $q.defer();
let new_options = angular.copy(options);
new_options.timeout = abort_defer.promise;
let do_throw_error = false;
let http_promise = $delegate(new_options).then(
response => response,
error => {
if(do_throw_error) return $q.reject(error);
return $q(() => null); // prevent promise chain propagation
});
let real_then = http_promise.then;
let then_function = function () {
return mod_promise(real_then.apply(this, arguments));
};
function mod_promise(promise) {
promise.then = then_function;
promise.abort = (do_throw_error_param = false) => {
do_throw_error = do_throw_error_param;
abort_defer.resolve();
};
return promise;
}
return mod_promise(http_promise);
}
return $delegate;
});
});
This code uses angularjs's decorator functionality to add a with_abort() function to the $http service.
with_abort() uses $http timeout option that allows you to abort an http request.
The returned promise is modified to include an abort() function. It also has code to make sure that the abort() works even if you chain promises.
Here is an example of how you would use it:
// your original code
$http({ method: 'GET', url: '/names' }).then(names => {
do_something(names));
});
// new code with ability to abort
var promise = $http.with_abort({ method: 'GET', url: '/names' }).then(
function(names) {
do_something(names));
});
promise.abort(); // if you want to abort
By default when you call abort() the request gets canceled and none of the promise handlers run.
If you want your error handlers to be called pass true to abort(true).
In your error handler you can check if the "error" was due to an "abort" by checking the xhrStatus property. Here's an example:
var promise = $http.with_abort({ method: 'GET', url: '/names' }).then(
function(names) {
do_something(names));
},
function(error) {
if (er.xhrStatus === "abort") return;
});

AngularJS: Controller variable not updating despite being bound to service variable

Problem: A controller variable vm.boatList (intended to be bound to a service variable, SearchService.boatList) is not updating with the service variable.
Code Snippets: Complete code at the bottom.
Controller
function SearchController($stateParams, SearchService) {
var vm = this;
vm.boatList = SearchService.boatList;
Service
function SearchService(BoatsDataService) {
var service = {
boatList: null,
getBoatList: getBoatList,
params: {}
};
return service;
Additional Data:
The getBoatList function called from the controller works - it logs data from the SearchService to the console. When I log vm.boatList immediately afterward, it's null.
Also, <div ng-repeat="boat in SearchController.boatList">...</div> only works when I assign directly to vm.boatList.
Console Output:
Array[3]
null
Complete Controller:
(function () {
'use strict';
angular.
module('trips').
controller('SearchController', SearchController);
SearchController.$inject = ['$stateParams', 'SearchService'];
function SearchController($stateParams, SearchService) {
var vm = this;
vm.boatList = SearchService.boatList;
vm.initialParams = getParams();
activate();
////////////////////
function activate() {
setInitialParams();
SearchService.getBoatList()
.then(function (data) {
SearchService.boatList = data;
console.log(SearchService.boatList); // Logs data.
console.log(vm.boatList); // Logs null.
})
.catch(function (error) {
console.log(error);
});
}
function getParams() {
var params = {
location: $stateParams.location,
passengers: $stateParams.passengers,
maxPrice: $stateParams.maxPrice,
minPrice: $stateParams.minPrice,
embark: $stateParams.embark,
disembark: $stateParams.disembark,
category: $stateParams.category
};
return params;
}
function setInitialParams() {
SearchService.params = getParams();
}
}
})();
Complete Service:
(function () {
'use strict';
angular.
module('trips').
factory('SearchService', SearchService);
SearchService.$inject = ['BoatsDataService'];
function SearchService(BoatsDataService) {
var service = {
boatList: null,
getBoatList: getBoatList,
params: {}
};
//$scope.$watch('service.params', function () {
// getBoatList().then(function (data {
// service.boatList = data;
// })
// }, true
//);
return service;
//////////////////////
function getBoatList() {
return BoatsDataService.BoatList
.query(service.params)
.$promise
}
}
})();
Recap: I don't know how to two-way bind, I guess.

When you're trying to bind a variable that's directly on the service, it will fail (see call by sharing). However, if you wrap it with an object, it will work like you expect, see this Fiddle.
So in your case, if you bind an object inside the service to your controller, it should be fine -
Service:
var service = {
boatListObj : {
boatList: null
},
getBoatList: getBoatList,
params: {}
};
Controller:
vm.boatListObj = SearchService.boatListObj;
Promise response:
.then(function (data) {
SearchService.boatListObj.boatList = data;
console.log(SearchService.boatListObj.boatList); // Logs data.
console.log(vm.boatListObj.boatList); // Should log fine now
})
The reason why <div ng-repeat="boat in SearchController.boatList">...</div> is not working is because SearchController.boatList is not on the $scope. It either must be on the $scope, or addressed via ControllerAs syntax when it's placed on the controller.

How to interrupt a series of $http calls in angularjs? [duplicate]

Given a Ajax request in AngularJS
$http.get("/backend/").success(callback);
what is the most effective way to cancel that request if another request is launched (same backend, different parameters for instance).

This feature was added to the 1.1.5 release via a timeout parameter:
var canceler = $q.defer();
$http.get('/someUrl', {timeout: canceler.promise}).success(successCallback);
// later...
canceler.resolve(); // Aborts the $http request if it isn't finished.

Cancelling Angular $http Ajax with the timeout property doesn't work in Angular 1.3.15.
For those that cannot wait for this to be fixed I'm sharing a jQuery Ajax solution wrapped in Angular.
The solution involves two services:
HttpService (a wrapper around the jQuery Ajax function);
PendingRequestsService (tracks the pending/open Ajax requests)
Here goes the PendingRequestsService service:
(function (angular) {
'use strict';
var app = angular.module('app');
app.service('PendingRequestsService', ["$log", function ($log) {
var $this = this;
var pending = [];
$this.add = function (request) {
pending.push(request);
};
$this.remove = function (request) {
pending = _.filter(pending, function (p) {
return p.url !== request;
});
};
$this.cancelAll = function () {
angular.forEach(pending, function (p) {
p.xhr.abort();
p.deferred.reject();
});
pending.length = 0;
};
}]);})(window.angular);
The HttpService service:
(function (angular) {
'use strict';
var app = angular.module('app');
app.service('HttpService', ['$http', '$q', "$log", 'PendingRequestsService', function ($http, $q, $log, pendingRequests) {
this.post = function (url, params) {
var deferred = $q.defer();
var xhr = $.ASI.callMethod({
url: url,
data: params,
error: function() {
$log.log("ajax error");
}
});
pendingRequests.add({
url: url,
xhr: xhr,
deferred: deferred
});
xhr.done(function (data, textStatus, jqXhr) {
deferred.resolve(data);
})
.fail(function (jqXhr, textStatus, errorThrown) {
deferred.reject(errorThrown);
}).always(function (dataOrjqXhr, textStatus, jqXhrErrorThrown) {
//Once a request has failed or succeeded, remove it from the pending list
pendingRequests.remove(url);
});
return deferred.promise;
}
}]);
})(window.angular);
Later in your service when you are loading data you would use the HttpService instead of $http:
(function (angular) {
angular.module('app').service('dataService', ["HttpService", function (httpService) {
this.getResources = function (params) {
return httpService.post('/serverMethod', { param: params });
};
}]);
})(window.angular);
Later in your code you would like to load the data:
(function (angular) {
var app = angular.module('app');
app.controller('YourController', ["DataService", "PendingRequestsService", function (httpService, pendingRequestsService) {
dataService
.getResources(params)
.then(function (data) {
// do stuff
});
...
// later that day cancel requests
pendingRequestsService.cancelAll();
}]);
})(window.angular);

Cancelation of requests issued with $http is not supported with the current version of AngularJS. There is a pull request opened to add this capability but this PR wasn't reviewed yet so it is not clear if its going to make it into AngularJS core.

If you want to cancel pending requests on stateChangeStart with ui-router, you can use something like this:
// in service
var deferred = $q.defer();
var scope = this;
$http.get(URL, {timeout : deferred.promise, cancel : deferred}).success(function(data){
//do something
deferred.resolve(dataUsage);
}).error(function(){
deferred.reject();
});
return deferred.promise;
// in UIrouter config
$rootScope.$on('$stateChangeStart', function (event, toState, toParams, fromState, fromParams) {
//To cancel pending request when change state
angular.forEach($http.pendingRequests, function(request) {
if (request.cancel && request.timeout) {
request.cancel.resolve();
}
});
});

For some reason config.timeout doesn't work for me. I used this approach:
let cancelRequest = $q.defer();
let cancelPromise = cancelRequest.promise;
let httpPromise = $http.get(...);
$q.race({ cancelPromise, httpPromise })
.then(function (result) {
...
});
And cancelRequest.resolve() to cancel. Actually it doesn't not cancel a request but you don't get unnecessary response at least.
Hope this helps.

This enhances the accepted answer by decorating the $http service with an abort method as follows ...
'use strict';
angular.module('admin')
.config(["$provide", function ($provide) {
$provide.decorator('$http', ["$delegate", "$q", function ($delegate, $q) {
var getFn = $delegate.get;
var cancelerMap = {};
function getCancelerKey(method, url) {
var formattedMethod = method.toLowerCase();
var formattedUrl = encodeURI(url).toLowerCase().split("?")[0];
return formattedMethod + "~" + formattedUrl;
}
$delegate.get = function () {
var cancelerKey, canceler, method;
var args = [].slice.call(arguments);
var url = args[0];
var config = args[1] || {};
if (config.timeout == null) {
method = "GET";
cancelerKey = getCancelerKey(method, url);
canceler = $q.defer();
cancelerMap[cancelerKey] = canceler;
config.timeout = canceler.promise;
args[1] = config;
}
return getFn.apply(null, args);
};
$delegate.abort = function (request) {
console.log("aborting");
var cancelerKey, canceler;
cancelerKey = getCancelerKey(request.method, request.url);
canceler = cancelerMap[cancelerKey];
if (canceler != null) {
console.log("aborting", cancelerKey);
if (request.timeout != null && typeof request.timeout !== "number") {
canceler.resolve();
delete cancelerMap[cancelerKey];
}
}
};
return $delegate;
}]);
}]);
WHAT IS THIS CODE DOING?
To cancel a request a "promise" timeout must be set.
If no timeout is set on the HTTP request then the code adds a "promise" timeout.
(If a timeout is set already then nothing is changed).
However, to resolve the promise we need a handle on the "deferred".
We thus use a map so we can retrieve the "deferred" later.
When we call the abort method, the "deferred" is retrieved from the map and then we call the resolve method to cancel the http request.
Hope this helps someone.
LIMITATIONS
Currently this only works for $http.get but you can add code for $http.post and so on
HOW TO USE ...
You can then use it, for example, on state change, as follows ...
rootScope.$on('$stateChangeStart', function (event, toState, toParams) {
angular.forEach($http.pendingRequests, function (request) {
$http.abort(request);
});
});

here is a version that handles multiple requests, also checks for cancelled status in callback to suppress errors in error block. (in Typescript)
controller level:
requests = new Map<string, ng.IDeferred<{}>>();
in my http get:
getSomething(): void {
let url = '/api/someaction';
this.cancel(url); // cancel if this url is in progress
var req = this.$q.defer();
this.requests.set(url, req);
let config: ng.IRequestShortcutConfig = {
params: { id: someId}
, timeout: req.promise // <--- promise to trigger cancellation
};
this.$http.post(url, this.getPayload(), config).then(
promiseValue => this.updateEditor(promiseValue.data as IEditor),
reason => {
// if legitimate exception, show error in UI
if (!this.isCancelled(req)) {
this.showError(url, reason)
}
},
).finally(() => { });
}
helper methods
cancel(url: string) {
this.requests.forEach((req,key) => {
if (key == url)
req.resolve('cancelled');
});
this.requests.delete(url);
}
isCancelled(req: ng.IDeferred<{}>) {
var p = req.promise as any; // as any because typings are missing $$state
return p.$$state && p.$$state.value == 'cancelled';
}
now looking at the network tab, i see that it works beatuifully. i called the method 4 times and only the last one went through.

You can add a custom function to the $http service using a "decorator" that would add the abort() function to your promises.
Here's some working code:
app.config(function($provide) {
$provide.decorator('$http', function $logDecorator($delegate, $q) {
$delegate.with_abort = function(options) {
let abort_defer = $q.defer();
let new_options = angular.copy(options);
new_options.timeout = abort_defer.promise;
let do_throw_error = false;
let http_promise = $delegate(new_options).then(
response => response,
error => {
if(do_throw_error) return $q.reject(error);
return $q(() => null); // prevent promise chain propagation
});
let real_then = http_promise.then;
let then_function = function () {
return mod_promise(real_then.apply(this, arguments));
};
function mod_promise(promise) {
promise.then = then_function;
promise.abort = (do_throw_error_param = false) => {
do_throw_error = do_throw_error_param;
abort_defer.resolve();
};
return promise;
}
return mod_promise(http_promise);
}
return $delegate;
});
});
This code uses angularjs's decorator functionality to add a with_abort() function to the $http service.
with_abort() uses $http timeout option that allows you to abort an http request.
The returned promise is modified to include an abort() function. It also has code to make sure that the abort() works even if you chain promises.
Here is an example of how you would use it:
// your original code
$http({ method: 'GET', url: '/names' }).then(names => {
do_something(names));
});
// new code with ability to abort
var promise = $http.with_abort({ method: 'GET', url: '/names' }).then(
function(names) {
do_something(names));
});
promise.abort(); // if you want to abort
By default when you call abort() the request gets canceled and none of the promise handlers run.
If you want your error handlers to be called pass true to abort(true).
In your error handler you can check if the "error" was due to an "abort" by checking the xhrStatus property. Here's an example:
var promise = $http.with_abort({ method: 'GET', url: '/names' }).then(
function(names) {
do_something(names));
},
function(error) {
if (er.xhrStatus === "abort") return;
});

AngularJS how to set variable in $http success function of dependency provider

I'm newbie in angularjs and I'm trying to create new provider. This is my code:
myApp.provider('$Data', function() {
this.URL = 'http://maps.googleapis.com/maps/api/geocode/json?address=Singapore, SG, Singapore, 153 Bukit Batok Street 1&sensor=true';
this.$get = $get;
$get.$inject = ['$http', '$q'];
function $get($http, $q) {
var that = this;
return {
isConnected: function() {
var bIsConnected = 'Default';
$http({method: 'GET', url:that.URL}).then(function (data) {
bIsConnected = 'Yes';
alert('Run this code!');
}, function (data) {
bIsConnected = 'No';
});
return bIsConnected;
}
}
}
});
Jsfiddle demo:
http://jsfiddle.net/0udm9/9dPsb/6/
After I run $Data.isConnected(), the result is always 'Default' although browser show the alert box. I think it's from success function is not of $get. And I have to use provider, not service or factory for this case. Can I do anything to fix this issue?
Thanks,

You have to use promise in your code.
DEMO
Provider:
isConnected: function() {
var deferred = $q.defer();
$http.get(that.url).then(function(res) {
deferred.resolve('Yes');
console.log('example:success', res);
}, function(err) {
deferred.resolve('No');
console.log('example:error', err);
});
return deferred.promise;
}
Controller:
$Data.isConnected().then(function(data) {
$scope.data = data;
});
// UPD
You must use objects if you need to use return values with async code.
DEMO
// UPD 2
FRESH DEMO LINK