I've written a single-page application using Google Maps in conjunction with AngularJS.
In short I have three columns - one filled with tools, one with a table of data, and the final is the geographical representation of the table's data.
The data is updated every minute.
The users all have multiple monitors, and it's been requested that adding the ability to have the map on one window, and table on the other - so that the map can have more real estate and we can add more columns to the table.
The solution that I really want is to create a new window using JS, and move the map's DIV to this window.
This works in chrome and it works exactly as I expected - moving the div doesn't break google map's or Angular's ties to the DOM, as the DIV is never deleted nor cloned, just moved within the DOM.
However IE11 treats the new window as an entirely separate document, and disallows the use of appendChild (throwing heirachy exceptions).
I have tried using adoptNode to move the node to the new window's document, but IE throws a 'No such interface supported' error on the adoptNode call, however IE allows you to use adoptNode to move the node between iframes, see here: http://jsfiddle.net/nx9u4y9w/9/
This works in FF/Chrome.
var f1 = window.f1,
f2 = window.f2,
pop = window.open(f2.location.href, 'pop'),
x = 0;
window.fx = function(o) {
var source = f1,
target = f2,
map;
if (x++ == 1) {
source = f2;
target = pop;
o.disabled = true;
}
map = source.document.getElementById('map-canvas');
var adopted = target.document.adoptNode(map);
target.document.body.appendChild(adopted);
}
Is there a simple way to get this working in IE11?
I wanted to avoid creating a new HTML page to load into the window, as it'd cause a serious break in the UX whilst the map reloads, plus it'll there's the code overhead of having to create an intra-browser messaging using postMessage, etc.
Related
I am using the ArcGIS JavaScript API for showing an ArcGIS map in my application. I also have filters on my page that are used to create a query definition to ArcGIS server, to filter down on the objects shown. When these filters are applied, the map zooms to the Extent applicable for the current selection agreeing to the search filters I entered.
Users also sometimes already zoom in to some part of the map and then hit the filter options. If more objects, outside of the current users view, also agree to the filters, the map zooms out to the view where all objects agreeing to the filters are visible again.
Ideally I would like to check, before appliying the new extent for the search filers, if the current etent is already inside (more zoomed in) in this new extent. If so, I would not like the map to zoom to the greater Extent.
Currently I use below code, to gather all objects agreeing to the filters/query. I commented (v1.5.0 comment) the 'setExtent' part for now, but ideally I would like a check there whether the current extent is already inside this new Extent. If so, do not zoom / use setExtent, if not so, do zoom / use setExtent:
var qt = new esri.tasks.QueryTask(identifyTaskLayerURL);
qt.execute(q,lang.hitch(this, function(response) {
if (response && response.features){
for (var k = 0 ; k < response.features.length ; k++){
// extract needed content from QueryTask result
var geometry = response.features[k].geometry;
if (geometry){
centerLocation = this._getCenterCoordinates(geometry);
centerX = centerLocation.x.toFixed(5).toString();
centerY = centerLocation.y.toFixed(5).toString();
multiPoint.addPoint(new esri.geometry.Point(centerX,centerY));
} else{
console.log(this._logNode + "query gave empty result");
}
}
if (this._referenceMxObjectsArr.length == 1){
this._gisMap.centerAndZoom(centerLocation,Number(this._singleObjectZoom) - 1);
} else {
// set extent
this._extent = multiPoint.getExtent();
this._extent.setSpatialReference(this._gisMap.spatialReference);
// v1.5.0 disabled next line
//this._gisMap.setExtent(this._extent);
}
}
}));
You could use the contains method of the extent geometry to check that, something like this should work,
this._extent = multiPoint.getExtent();
this._extent.setSpatialReference(this._gisMap.spatialReference);
if (!mapExtent.contains(this._extent) {
this._gisMap.setExtent(this._extent);
}
To get the current extent depends the version of the API you are using.
With API 4.x you need to use the map view, mapView.extent.
With API 3.x you need to use the map, map.extent
Is it possible to use Text Input Processor on a specific Tab of a Firefox window?
Do all the tabs share the same nsIDOMWindow object? If so, then is there any other solution?
Rephrasing my problem: I want to type text to a specific tab, and if there is more than one, then it might not be the current.
Below is an example code to write text on any Firefox window, but only for current tab:
function myTestFunc() {
// var windows = Services.wm.getEnumerator("navigation:browser");
var windows = require("sdk/windows");
for (let browserWindow of windows.browserWindows) {
//console.log(window.title);
var chromeWindow = viewFor(browserWindow);
console.log(chromeWindow.document.location.href);
var idomWindow = chromeWindow.QueryInterface(Ci.nsIDOMWindow);
var TIP = Cc["#mozilla.org/text-input-processor;1"].
createInstance(Ci.nsITextInputProcessor);
if(!TIP.beginInputTransaction(idomWindow, onNotifyImpl)) {
console.log("Error TIP can't start");
continue;
}
TIP.setPendingCompositionString("foo-bar-buzz");
if (!TIP.flushPendingComposition()) {
console.log("Failed to flush");
continue; // Composition is not started
}
}
}
nsIDOMWindow (+ various related interfaces like the docshell) is the XPCOM representation of regular window objects in the w3c specs. And since window objects can be nested (e.g. via iframes) so can be nsIDOMWindows. When you're accessing browser windows you're generally accessing the outer windows representing the browser chrome, not the content.
In principle you can access a tab's content window directly from its <browser> XUL element, but to be forward-compatible with e10s you should use framescripts instead.
I have HTML file with a javascript like this:
function drawCharts(){
var graph; var data; var options;
options = { title: 'Title1' };
data = google.visualization.arrayToDataTable([['A','B'],['0',7.2],['2',7.2],['4',7.3],['6',6.4],['8',6.4],['10',6.3],['12',6.2],['14',6.2],['16',6],['18',6],['20',6.5],['22',7.2]]);
graph = new google.visualization.LineChart(document.getElementById('chart_div1'));
graph.draw(data, options);
...
data = google.visualization.arrayToDataTable([['A','B'],['0',14.5],['2',14.5],['4',14.5],['6',13.2],['8',13.1],['10',12.9],['12',12.8],['14',12.7],['16',12.5],['18',12.4],['20',12.2],['22',14.5]]);
graph = new google.visualization.LineChart(document.getElementById('chart_div50'));
graph.draw(data, options);
}
google.setOnLoadCallback(drawCharts);
(This file was generated previously.) The problem is, that when loading 50 charts, it's takes quite a long time. The best would be drawing the charts independently, not waiting for the others to draw - I would like to ask you how could it be made.
Edit: Inspired by PhonicUK's answer, I've found an Element ‘in view’ plugin with which I'm calling a function when certain div is being viewed and it's empty.
You can do a few different things here:
The first is that with 50 charts, I'm assuming not all of them are visible at the same time. So you can trap the window.onscroll event to know when the user is scrolling and only create the graphs when they're just below the bottom of the visible area. This means that only the currently visible and soon-to-be visible graphs are created, and the rest don't exist until they're needed.
The second is to generate the graphs server side and send them across as images. This could also be combined with the above to save on load time.
I'm working on a implementing a Google map on a website with our own tiles overlays and KML elements. I've been previously requested to create code so that, for instance, when the page is loaded from a specific URL, it would initialize with one of the tile overlays already enabled. Recently, I've been requested to do the same for the buildings which are outlined by KML elements so that, arriving at the page with a specific URL, it would automatically zoom, center, and display information on the building.
However, while starting with the tile overlays work, the building KML does not. After doing some testing, I've determined that when the code which checks the URL executes, the page is still loading the KML elements and thus do not exist for the code to compare to or use:
Code for evaluating URL (placed at the end of onLoad="initialize()")
function urlClick() {
var currentURL = window.location.href; //Retrieve page URL
var URLpiece = currentURL.slice(-6); //pull the last 6 digits (for testing)
if (URLpiece === "access") { //If the resulting string is "access":
access_click(); //Display accessibility overlay
} else if (URLpiece === "middle") { //Else if the string is "middle":
facetClick('Middle College'); //Click on building "Middle College"
};
};
facetClick();
function facetClick(name) { //Convert building name to building ID.
for (var i = 0; i < active.placemarks.length; i++) {
if (active.placemarks[i].name === name) {
sideClick(i) //Click building whose id matches "Middle College"
};
};
};
Firebug Console Error
active is null
for (var i = 0; i < active.placemarks.length; i++) {
active.placemarks is which KML elements are loaded on the page, and being null, means no KML has been loaded yet. In short, I have a mistiming and I can't seem to find a suitable place to place the URL code to execute after the KMl has loaded. As noted above, I placed it at the end of onLoad="initialize()", but it would appear that, instead of waiting for the KML to completely load earlier in the function, the remainder of the function is executed:
onLoad="initialize()"
information(); //Use the buttons variables inital state to set up description
buttons(); //and button state
button_hover(0); //and button description to neutral.
//Create and arrange the Google Map.
//Create basic tile overlays.
//Set up parser to work with KML elements.
myParser = new geoXML3.parser({ //Parser: Takes KML and converts to JS.
map: map, //Applies parsed KML to the map
singleInfoWindow: true,
afterParse: useTheData //Allows us to use the parsed KML in a function
});
myParser.parse(['/maps/kml/shapes.kml','/maps/kml/shapes_hidden.kml']);
google.maps.event.addListener(map, 'maptypeid_changed', function() {
autoOverlay();
});
//Create other tile overlays to appear over KML elements.
urlClick();
I suspect one my issues lies in using the geoxml3 parser (http://code.google.com/p/geoxml3/) which converts our KML files to Javascript. While the page has completed loading all of the elements, the map on the page is still loading, including the KML elements. I have also tried placing urlClick() in the parser itself in various places which appear to execute after all the shapes have been parsed, but I've had no success there either.
While I've been intending to strip out the parser, I would like to know if there is any way of executing the "urlClick" after the parser has returned the KML shapes. Ideally, I don't want to use an arbitrary means of defining a time to wait, such as "wait 3 seconds, and go", as my various browsers all load the page at different times; rather, I'm looking for some way to say "when the parser is done, execute" or "when the Google map is completely loaded, execute" or perhaps even "hold until the parser is complete before advancing to urlClick".
Edit: Here are links to the map with the basic form of the issue found above. Since I've been developing the next update to the map on a test server, facetClick() is not part of this live version and I instead use its output function sideClick(); however the error is still the same in this arrangement:
active is null
google.maps.event.trigger(active.gpolygons[poly],'click');
Map: http://www.beloit.edu/maps/
Map w/Accessibility: http://www.beloit.edu/maps/?access
Map w/Building Click: http://www.beloit.edu/maps/?middle
EDIT: Spent most of my day working on rebuilding the functionality of the parser in Javascript and, low and behold, without the parser it works just fine. I figure that is obvious as I have to define each shape individually before the code, rather than waiting for it to be passed along by the parser. It would seem the answer is "if you want unique URLs, drop the parser". >_<
I've come across a similar problem when dealing with waiting for markers and infoWindows to load before executing a function. I found a solution here ( How can I check whether Google Maps is fully loaded? see #Veseliq's answer) that using the google maps event listener function for checking when the map is 'idle', does the trick. I assume this solution would work for KML layers as well. Essentially what you will have to do is include the following at the end of your initialize function:
google.maps.event.addListenerOnce(map, 'idle', function(){
// do something only the first time the map is loaded
});
In the API reference ( https://developers.google.com/maps/documentation/javascript/reference ) it states that the 'idle' event "is fired when the map becomes idle after panning or zooming". However, it seems to hold true that it is also fires on initial page load after everything in the map_canvas has loaded. And by using the addListenerOnce call, you ensure that it is never executed again after the initial page load (meaning it won't fire after a zoom or a pan action).
Second option:
As I mentioned you can take the callback approach, I believe this will only call your urlClick function after completing the parsing. Here's how you should probably arrange your code to make it work:
function someFunction(callback){
myParser.parse(['/maps/kml/shapes.kml','/maps/kml/shapes_hidden.kml']);
callback();
}
and then in your initialize you will have:
someFunction(function(){
urlClick();
});
You will have to make your map and myParser variables global.
Resources: This link had an excellent and detailed brief on how callback functions work in javascript, http://www.impressivewebs.com/callback-functions-javascript/
Or, not precisely "executing," but updating a function that exists before the response with a function returned in the response.
Step 1
I have an HTML5 page that describes a location.
On the server side this page includes a ColdFusion file "MapFunction.cfm." (Which is used for consistent mapping all over the site at large.)
MapFunction.cfm outputs a javascript function "loadMap" mixed with the HTML.
loadMap() contains all the javascript needed to place a Bing map of the location on the page.
Some javascript in a separate js file actually calls loadMap().
This works when the page is first loaded.
Step 2
Search & results stuff is all fine too. Nothing needs to be done with the map here.
Step 3
When a search result is clicked, the result detail is loaded asynchronously via a jQuery $.get() request.
It returns mixed HTML and javascript which I use jQuery to traverse through.
With the jQuery objects I update specific areas of the page to show different details.
One of the areas I need to update is the map. That part isn't working.
What I'm working with is mixed HTML and Javascript that is identical in both Step 1 and Step 3:
<section id="mod-map" class="module mod-map">
<header class="mod-head">
Map <span class="arrow"></span>
</header>
<div id="map" class="mod-body">
<div id="cmMap" style="position:relative;width:369px;height:303px;"></div>
<script type="text/javascript" id="cfLoadMap">
// ...some global variables are defined to use...
function loadMap()
{
// ...Bing/Virtual Earth Map Stuff...
// This part here is unique to each location's detail
var propertypoint = new VELatLong(parseFloat(36.707756),parseFloat(-78.74204));
// ...More Bing/Virtual Earth Map Stuff...
// This part here is unique to each location's detail
var label = "<div class=\"wrapper\"><img onerror=\"replaceImage(this);\" src=\"noimage.jpg\" width=\"100\" class=\"thumb\" alt=\"\" /><div class=\"caption\"><br />City<br /> State, 12345</div></div>";
// ...More Bing/Virtual Earth Map Stuff...
}
</script>
</div>
</section>
Now, in Step 3 loadMap() does get called again, but it just refreshes the map to the same location. The loadMap() function as the browser knows it doesn't get updated with the one retrieved via ajax.
That updated block of mixed HTML & javascript above does get successfully added to the page after each ajax call. It is placed right where it originally is, but with different coordinates and captions where indicated by the comments above. The ajax callback looks like (slightly simplified):
$.get(urlToLoad, {}, function(data, status, request){
var newData = $(innerShiv(data, false)),
newModules = newData.find(".module");
// (innerShiv is used to make HTML5 tags work in IE. It's possible I'm going a little overboard with using it, but I had a lot of issues with IE. :-))
newModules.each(function(i){
var thisId = "#" + $(this).attr("id"),
thisBody = $(this).find(".mod-body").html(),
toReplaceAll = $("body").find(thisId),
toReplaceBody = toReplaceAll.find(".mod-body");
// These variables are used to choose add content in different ways based on thisID. Below is the one the map area is subject to.
toReplaceBody.html(innerShiv(thisBody));
}); // each
// Various things including loadMap() get called/re-initiated/etc. here
}, "html"); // get
This works in Firefox 3.6, but nowhere else I've tested (Opera 11, IE 7, Chrome 8).
I have done this before in a similar situation with dynamically PHP generated javascript written to a separate js file--$.getScript works great there. But this is mixed into the HTML of the ajax response.
I've been looking and have found and tried the following (among other things):
Attempted Solutions
1. var myScript = new Function($('script#cfLoadMap', data).text()); myScript();
2. eval(newData.text());
3. eval(newData.find("#cfLoadMap").text());
4. $("head").append(newData.find("#cfLoadMap"));
None of these so far seem to be doing any good.
I know there are a few other ways this could theoretically be done. But as it stands at the moment, I do not have any ability to change much of anything but what I do with the mixed HTML & javascript response. I need a solution where,
The details will be updated via ajax.
The javascript will be mixed in with the HTML.
The javascript will be a javascript function generated dynamically by ColdFusion.
Very similar questions have been asked & resolved before, so I hope this can be done. However, none of the solutions I've found are working for me. Might be making a mistake or missing something, or maybe it's just different when it's a function?
Any help would be appreciated.
Answer
It suddenly started working with the following code:
$.get(urlToLoad, {}, function(data, status, request){
var safeData = $(innerShiv(data, false)),
newModules = safeData.find(".module"),
newScript = safeData.find("script#cfLoadMap");
// Update Each module
newModules.each(function(i){
var jqoThis = $(this),
thisId = "#" + jqoThis.attr("id"),
newModule = jqoThis,
newModBody = jqoThis.find(".mod-body"),
curModule = $("body").find(thisId),
curModBody = curModule.find(".mod-body");
// Varies by id, this one is used by the map area.
curModBody.html(innerShiv(newModBody.html()));
}); // each
// Make sure plugins are bound to new content
$("body").oneTime(100, function(){
// Various things get initiated here
// Maps -- this one works: Chrome, Firefox, IE7, Opera
$("head").append(newScript);
// Maps -- these did not work
/*
// Firefox only (but Firefox always works)
runScript = new Function(newScript.text());
runScript();
*/
/*
// Firefox only (but Firefox always works)
eval(newScript.text());
*/
}); // oneTime
}, "html"); // get
One thing I did notice for sure was that without innerShiv, in all my browsers, $(data).find("script#cfLoadMap").text() was blank -- which I did not expect.
Most likely it's that functions in JavaScript can be declared in non-global scope, so when you're inserting the <script> tag, jQuery is evaling it, but not replacing the original function (as you noticed).
A fix for this would be to change how you declare the function from this:
function loadMap()
{
...
}
to this:
window.loadMap = function loadMap() {
...
}
That way the top-level loadMap will always be the latest one that came down from the server.
You may want to consider not modifying the client code this way as it can make debugging trickier, but that's totally up to you. Hopefully this answer works for you either way.
It suddenly started working with the following code:
$.get(urlToLoad, {}, function(data, status, request){
var safeData = $(innerShiv(data, false)),
newModules = safeData.find(".module"),
newScript = safeData.find("script#cfLoadMap");
// Update Each module
newModules.each(function(i){
var jqoThis = $(this),
thisId = "#" + jqoThis.attr("id"),
newModule = jqoThis,
newModBody = jqoThis.find(".mod-body"),
curModule = $("body").find(thisId),
curModBody = curModule.find(".mod-body");
// Varies by id, this one is used by the map area.
curModBody.html(innerShiv(newModBody.html()));
}); // each
// Make sure plugins are bound to new content
$("body").oneTime(100, function(){
// Various things get initiated here
// Maps -- this one works: Chrome, Firefox, IE7, Opera
$("head").append(newScript);
// Maps -- these did not work
/*
// Firefox only (but Firefox always works)
runScript = new Function(newScript.text());
runScript();
*/
/*
// Firefox only (but Firefox always works)
eval(newScript.text());
*/
}); // oneTime
}, "html"); // get
One thing I did notice for sure was that without innerShiv, in all my browsers, $(data).find("script#cfLoadMap").text() was blank -- which I did not expect.
However, I don't really see how this is different from what I had tried before and which failed. If someone spots a substantive difference, please let me know, for future reference?
(Note: it doesn't seem to make a difference that the Map bit is placed in the timeout, it works as well above it.)