I'm using Leaflet.Measure for measuring areas and distances and I also have several layers on a map. When you click on a layer, the onclick function is being fired and a popup appears. When I start to measure a new area and click on a map layer, the popup appears again and I cannot measure area further. Is there any possibility to mute layer's interactivity, while I'm using measurement tool?
I tired to import my Angular service class into a measuring plugin to change layer's onclick behaviour, but it didn't work.
Here's a part of Leaflet.Measure plugin code, which I have modified:
import { MapService} from './app/services/map.service';
L.MeasureAction = L.Handler.extend({
_onMouseClick: function (event) {
MapService.enablePopupOpen = false; // if it's set to false, then popup won't open
//default plugin code
var latlng = event.latlng || this._map.mouseEventToLatLng(event);
if (this._lastPoint && latlng.equals(this._lastPoint)) {
return;
}
if (this._trail.points.length > 0) {
var points = this._trail.points;
points.push(latlng);
var length = points.length;
this._totalDistance += this._getDistance(points[length - 2], points[length - 1]);
this._addMeasurePoint(latlng);
//this._addMarker(latlng);
if (this.options.model !== "area") {
this._addLable(latlng, this._getDistanceString(this._totalDistance), "leaflet-measure-lable");
}
} else {
this._totalDistance = 0;
this._addMeasurePoint(latlng);
this._addMarker(latlng);
if (this.options.model !== "area") {
this._addLable(latlng, L.Measure.start, "leaflet-measure-lable");
}
this._trail.points.push(latlng);
}
this._lastPoint = latlng;
this._startMove = false;
},
...
})
I want to display Ext.Dialog in the center of screen which i achieved by using showBy method as below.
dialog.showBy(view.lookupReference('btn'), 'c-c');
It works fine. But when i change the orientation in android device dialog's position gets changed and only half of the dialog is visible.
I tried below steps.
Provided config centered: true
Used center method dynamically
orientationchange event seems to be removed in Ext 6.7
dialog.showBy(Ext.getBody(), 'c-c');
dialog.showBy(Ext.Viewport, 'c-c');
Couldn't make it with any of the above, Any hints to achieve this. I am using Ext JS 6.7
I will give you advice from ExtJS 6.6, be careful it can be updated from 6.7.
I have face the same probleme not so long ago and I found this event : https://docs.sencha.com/extjs/6.6.0/modern/Ext.viewport.Default.html#event-orientationchange
Ok it's only on viewport but i don't found any other solution.
Actually I do something like that :
At the end of my main view initialize function :
Ext.Viewport.on('orientationchange', this.getController().OnOrientationChange, this.getController());
On my main view controller :
OnOrientationChange: function(viewport, orientation) {
viewport.mask();
var actualWidth = window.innerWidth;
var actualHeight = window.innerHeight;
// Orientation check due to latence can fake orientation result
if (orientation === "landscape") {
if (actualWidth < actualHeight) {
Ext.defer(this.OnOrientationChange, 100, this, [viewport, orientation]);
return;
}
}
else if (orientation === "portrait") {
if (actualWidth > actualHeight) {
Ext.defer(this.OnOrientationChange, 100, this, [viewport, orientation]);
return;
}
}
viewport.unmask();
// Xtype liste of object would by notified
var objXtypeList = ['dataview', 'carousel', 'signingarea'];
for (var i = 0, max = objXtypeList.length; i < max; i++) {
var objXtype = objXtypeList[i];
var objList = viewport.query(objXtype);
for (var j = 0, maxJ = objList.length; j < maxJ; j++) {
var obj = objList[j];
if (Ext.isFunction(obj.OnOrientationChange)) {
Ext.defer(obj.OnOrientationChange, 50, obj, [orientation]);
}
}
}
}
Every object's controller that has to react :
OnOrientationChange: function(orientation) {
// The way the object should react
}
I don't know if that was the most correct way to to it, but it's worked for me.
Discussion on mobile usability under Chart.js v2 library,
Can we simulate click event on those "score points" in the RadarChart?
I'm asking this because,
Desktop view and tablet view looks quite okay for "score points" navigation by clicking on those points within Chart to trigger external interactivity by returned index.
an popular example can be find is
$('#ChartV2').click(function(e) {
var activePoints = myRadarChart.getElementsAtEvent(e);
var firstPoint = activePoints[0];
console.log(firstPoint);
if (firstPoint !== undefined){
alert(firstPoint._index);
//so then we can use
// index to hide show results in the html elements out of canvas , etc
}
});
But if you look into mobile view,
under responsive:true, the chart will be much smaller by auto resizing,
thus the points inside radarchart can be very small for mobile click,
same with labels, everything will be smaller and harder to click on.
Could it be customizable to let user navigate those "score points"
(initially triggered by click on canvas manually )
can it be indirectly trigger by
external "prev", "next" navigation buttons
on left and right side of the Radarchart
such as those slider / carousel navigation buttons?
You can do this by utilizing the chart instance methods
Script
var myRadarChart = new Chart(ctx, {
...
(function (chart) {
var helpers = Chart.helpers;
var currentDatasetIndex;
var currentPointIndex;
$('#ChartV2').click(function (e) {
// try getting an element close to the click
var activePoints = chart.getElementAtEvent(e);
var firstPoint = activePoints[0];
if (firstPoint === undefined) {
// otherwise pick the first visible element
helpers.each(chart.data.datasets, function (dataset, datasetIndex) {
if (firstPoint === undefined && this.isDatasetVisible(datasetIndex)) {
var meta = this.getDatasetMeta(datasetIndex);
firstPoint = meta.data[0];
}
}, chart);
}
// need this check as we may have 0 visible elements
if (firstPoint !== undefined) {
currentDatasetIndex = firstPoint._datasetIndex;
currentPointIndex = firstPoint._index;
$('#prev, #next').removeAttr('disabled');
updateView();
}
});
$('#prev').click(function () {
// we add (n - 1) and do a modulo n to move one step back in an n element array.
if (currentPointIndex === 0)
currentDatasetIndex = (currentDatasetIndex + chart.data.datasets.length - 1) % chart.data.datasets.length;
currentPointIndex = (currentPointIndex + chart.data.labels.length - 1) % chart.data.labels.length;
updateView();
});
$('#next').click(function () {
currentPointIndex = (currentPointIndex + 1) % chart.data.labels.length;
if (currentPointIndex === 0)
currentDatasetIndex = (currentDatasetIndex + 1) % chart.data.datasets.length;
updateView();
});
// this (hoisted) function will update the text and show the tooltip
function updateView() {
$('#value').text(
chart.data.datasets[currentDatasetIndex].label + ' : ' +
chart.data.labels[currentPointIndex] + ' : ' +
chart.data.datasets[currentDatasetIndex].data[currentPointIndex]);
// we mess around with an internal variable here - this may not work with a new version
chart.tooltip._active = [ chart.getDatasetMeta(currentDatasetIndex).data[currentPointIndex] ];
chart.tooltip.update();
chart.render();
}
}(myRadarChart));
If you want this functionality only for small screens, just add a screen size check to the above chart click handler and hide the buttons and label using media queries.
Fiddle - http://jsfiddle.net/uxqL6rwf/
We are building an image editor of sorts using Paper.js. We have a queue on the side of the Paper.js canvas that allows switching between images. Each time we switch between images, we want to flatten all the annotations (rasterize) onto the image just being edited.
Each time we switch images, this method is called, which rasterizes the current image and annotations to a data URL. (If we revisit this image, a raster from this data URL will be displayed.)
var flattenToDataUrl = function() {
layerAsRaster = paper.project.layers[0].rasterize(); // Layer to Paper.js Raster object
layerAsRaster.visible = false; // Attempt to set not visible
var dataString = layerAsRaster.toDataURL();
return dataString;
};
Then we end up calling this method, which changes out the image we're editing:
var setCanvasImage = function(imageObject) {
if(imageObject != null)
{
imageHeight = imageObject.height;
var imageWidth = imageObject.width;
// Set up HTMLImage
var imageElement = new Image(imageObject.width, imageObject.height);
if(_.has(imageObject, 'imageData')) { // Came as 64 bit data
imageElement.src = 'data:image/png;base64,' + imageObject.imageData;
} else if(_.has(imageObject, 'imageUrl')) { // Came as URL
imageElement.src = imageObject.imageUrl;
}
// Add image to Paper.js canvas
imageElement.onload = function(event) {
// Initialize Paper.js on the canvas
paper.setup(canvas);
raster = new paper.Raster(imageElement, new paper.Point(canvas.width / 2, canvas.height / 2));
setUpNotes();
selectedItems = new paper.Group(); // Since Paper.js has been setup we can now initialize this Group
registerCanvasEvents(); // Panning, zooming, moving selected items, deselecting all selected items
fitToPage();
};
}
};
So, this changes out the image, but when I move my mouse into the canvas after selecting a different image in the queue, it glitches to the image we were just on (with its annotations) until I do something like pan, zoom, etc. Then I see the image I selected and am truly working with.
Removing the flattenToDataUrl() functionality makes the queue work seamlessly. So it seems to me something is fishy there. We are generating a Paper.js Raster object in that method. Rasters seem to automatically add themselves. I attempt to curb this with a call to
layerAsRaster.visible = false;
but to no avail.
What is causing this glitchy behavior and how do I prevent it?
Update
For clarity (hopefully) and completeness, I've decided to post the whole PaperFunctions class we use in conjunction with React, which hosts our <canvas> element. There's a lot of code, and a lot of cleanup to do, especially in registerCanvasEvents(). Bear with this learning beginner. Also it's several hundred lines, so it may be helpful to paste it into your favorite editor. Entry points include setCanvas which is called in componentDidMount of the React class with the <canvas> element, and canvasSetImage which is called from the queue. I agree from bmacnaughton's answer that it's weird to call paper.setup(canvas) every time we load a new image. I'm currently investigating the right solution to this, the right place to put it. setCanvas seems logical but when I drag the image to move it in that setup, it leaves a trail of images in its wake. Anyway, here's PaperFunctions.js:
var JQueryMousewheel = require('jquery-mousewheel')($);
var SimplePanAndZoom = require('./SimplePanAndZoom.js');
var panAndZoom = new SimplePanAndZoom();
var selectedItems;
// We use selection here in two distinct ways.
// An item may be Paper.js selected but not in the selection group.
// This is because we want to show it is selectable.
// A blue bounding box indicates it is selectable.
// A green bounding box indicates it has actually been selected and added to selectedItems.
// Only things in selectedItems are actually operated on.
// So the event handlers in this method basically set up whether or not the item is in selectedItems (and therefore will be operated on for moving, resizing, deleting, etc.).
// That is, the event handlers here are concerned with displaying to the user the status of selection for the item - whether or not it will be operated on when events actually happen on the selectedItems Group.
var registerItemEvents = function(item) {
// Boolean flag for mouseup to know if was drag or click
var dragged;
// For tracking if dragging or clicking is happening
item.on('mousedown', function(e) {
dragged = false;
});
// On click toggle selection
item.on('mouseup', function(event) {
event.stopPropagation(); // Only for item applied to
event.preventDefault();
if(!dragged) {
var justAdded = addIfNotInSelectedItems(item);
if(!justAdded) { // Item was in selection group, remove it
item.remove();
paper.project.activeLayer.addChild(item);
this.selectedColor = paper.project.activeLayer.selectedColor;
//item.selected = false;
}
}
});
// Show as selectable even after has been deselected
item.on('mousemove', function(event) {
this.selected = true;
})
// If not selected, on mouse enter show that it is selectable
item.on('mouseenter', function(event) {
if(!this.selected) {
this.selected = true;
}
});
// If not selected, on mouse leave remove indicator that is selectable
item.on('mouseleave', function(event) {
var isInSelectedItems = selectedItems.getItem(item);
if(this.selected && isInSelectedItems == null) {
this.selected = false;
}
});
// On drag, move item
item.on('mousedrag', function(event) {
dragged = true;
// If user starts dragging automatically select the item
addIfNotInSelectedItems(item);
});
}
var addIfNotInSelectedItems = function(item) {
var isInSelectedItems = selectedItems.getItem(item);
if(isInSelectedItems == null) { // Item not currently in selection group, add it
selectedItems.addChild(item);
item.selectedColor = 'green';
item.selected = true;
return true; // Was added, return true
} else {
return false; // Already in, return false
}
}
var registerCanvasEvents = function() {
if(paper.view != null && canvas != null) {
// Zoom on mousewheel
$(canvas).mousewheel(function(event) {
event.preventDefault();
var mousePosition = new paper.Point(event.offsetX, event.offsetY);
var viewPosition = paper.view.viewToProject(mousePosition);
var returnedValues = panAndZoom.changeZoom(paper.view.zoom, (event.deltaY * -1), paper.view.center, viewPosition, 1.1);
var newZoom = returnedValues[0];
var offset = returnedValues[1];
paper.view.zoom = newZoom;
paper.view.center = paper.view.center.add(offset);
});
// For tracking if dragging or clicking is happening
var dragged;
paper.project.layers[0].on('mousedown', function(e) { // TODO should be layer 0 in long run?
dragged = false;
});
// Pan on mouse drag
/*paper.project.layers[0].on('mousedrag', function(event) { // TODO should be layer 0 in long run?
if(!event.event.ctrlKey && !event.event.altKey && !event.event.shiftKey) { // No keys (that we use) can be pushed
dragged = true; // We're panning, we don't wish to deselect all items as we would do with a click
paper.view.center = panAndZoom.changeCenter(paper.view.center, event.delta.x, event.delta.y, 0.7);
//event.preventDefault();
}
});*/
// Move selected items on mouse drag
selectedItems.on('mousedrag', function(event) {
event.stopPropagation(); // Don't propogate up or it will register as a pan event
event.preventDefault();
dragged = true; // We're panning, we don't wish to deselect all items as we would do with a click
this.translate(new paper.Point(event.delta.x, event.delta.y));
});
// If was a click and not a drag, deselect selected items
paper.project.layers[0].on('mouseup', function(event) {
if(!dragged) {
var removedItems = selectedItems.removeChildren(); // Remove from selection group, which also removes from display
paper.project.activeLayer.addChildren(removedItems); // Return to display
// Reset selection colors for showing selectable
for(var i =0; i < removedItems.length; i++) {
removedItems[i].selectedColor = paper.project.activeLayer.selectedColor;
removedItems[i].selected = false;
}
}
});
// Initial path object, will be reset for new paths after Alt is released
var path = newPath();
var paths = [];
paths.push(path);
// On mousedown add point to start from
paper.project.layers[0].on('mousedown', function(event) {
if(event.event.altKey && !event.event.ctrlKey) { // Alt key to add a path, but disallow attempting to add text at the same time
if(paths[paths.length-1].lastSegment == null) {
//path.add(event.point, event.point);
paths[paths.length-1].add(event.point, event.point);
} else {
//path.add(path.lastSegment.point, path.lastSegment.point);
paths[paths.length-1].add(paths[paths.length-1].lastSegment.point, paths[paths.length-1].lastSegment.point);
}
}
});
// On mousedrag add points to path
paper.project.layers[0].on('mousedrag', function(event) {
if(event.event.altKey && !event.event.ctrlKey) { // Alt key to add a path, but disallow attempting to add text at the same time
if(event.event.shiftKey) { // Use shift key for freeform
//path.add(event.point);
paths[paths.length-1].add(event.point);
} else { // Default of straight line added to path
//path.lastSegment.point = event.point;
paths[paths.length-1].lastSegment.point = event.point;
}
}
}.bind(this));
var tool = new paper.Tool();
var startDragPoint;
// Capture start of drag selection
paper.tool.onMouseDown = function(event) {
if((event.event.ctrlKey && event.event.shiftKey) || (event.event.ctrlKey && event.event.altKey)) {
startDragPoint = new paper.Point(event.point);
}
};
paper.tool.onMouseDrag = function(event) {
// Panning
if(!event.event.ctrlKey && !event.event.altKey && !event.event.shiftKey) { // No keys (that we use) can be pushed
dragged = true; // We're panning, we don't wish to deselect all items as we would do with a click
paper.view.center = panAndZoom.changeCenter(paper.view.center, event.delta.x, event.delta.y, 0.7);
//event.preventDefault();
}
// Show box indicating the area that has been selected
// For moving area and whiting out area
if((event.event.ctrlKey && event.event.shiftKey) || (event.event.ctrlKey && event.event.altKey)) {
dragged = true;
var showSelection = new paper.Path.Rectangle({
from: startDragPoint,
to: event.point,
strokeColor: 'red',
strokeWidth: 1
});
// Stop showing the selected area on drag (new one is created) and up because we're done
showSelection.removeOn({
drag: true,
up: true
});
}
};
// Capture start of drag selection
paper.tool.onMouseUp = function(event) {
if((event.event.ctrlKey && event.event.shiftKey) || (event.event.ctrlKey && event.event.altKey)) {
var endDragPoint = new paper.Point(event.point);
if(event.event.ctrlKey && event.event.shiftKey) { // Whiteout area
whiteoutArea(startDragPoint, endDragPoint);
} else if(event.event.ctrlKey && event.event.altKey) { // Move selected area
selectArea(startDragPoint, endDragPoint);
}
}
};
// Key events
paper.tool.onKeyUp = function(event) {
// Delete selected items on delete key
if(event.key == 'delete') {
selectedItems.removeChildren();
} else if (event.key == 'option') {
registerItemEvents(paths[paths.length-1]);
// Start a new path
paths.push(newPath());
}
}
}
}
// These variables are scoped so that all methods in PaperFunctions can access them
var canvas; // Set by setCanvas
var imageHeight; // Set by setCanvasImage
var raster;
var toolsSetup = false;
var setCanvas = function(canvasElement) {
canvas = canvasElement;
paper.setup(canvas);
};
var setCanvasImage = function(imageObject) {
if(imageObject != null)
{
imageHeight = imageObject.height;
var imageWidth = imageObject.width;
// Set up HTMLImage
var imageElement = new Image(imageObject.width, imageObject.height);
if(_.has(imageObject, 'imageData')) { // Came as 64 bit data
imageElement.src = 'data:image/png;base64,' + imageObject.imageData;
} else if(_.has(imageObject, 'imageUrl')) { // Came as URL
imageElement.src = imageObject.imageUrl;
}
// Add image to Paper.js canvas
imageElement.onload = function(event) {
//canvas.height = $(document).height()-3; // Set canvas height. Why do this here and not in the React component? Because we set the width here too, so we're keeping those together. Perhaps in the future this will be changed when we are responsive to window resizing.
//scalingFactor = canvas.height / imageObject.height; // Determine the ratio
//canvas.width = imageElement.width * scalingFactor; // Scale width based on height; canvas height has been set to the height of the document
// Initialize Paper.js on the canvas
paper.setup(canvas);
raster = new paper.Raster(imageElement, new paper.Point(canvas.width / 2, canvas.height / 2));
//setUpLineAndFreeFormDrawing(); // TODO once we cycle through images will we need to reset this for each new image or can we do this just once?
setUpNotes(); // TODO once we cycle through images will we need to reset this for each new image or can we do this just once?
selectedItems = new paper.Group(); // Since Paper.js has been setup we can now initialize this Group
registerCanvasEvents(); // Panning, zooming, moving selected items, deselecting all selected items
fitToPage();
};
}
};
var fitToPage = function() {
if(paper.view != null && canvas != null) {
// Fit image to page so whole thing is displayed
var scalingFactor = canvas.height / imageHeight; // Constant representation of the ratio of the canvas size to the image size
var zoomFactor = scalingFactor / paper.view.zoom; // Dynamic representation of the zoom needed to return to viewing the whole image in the canvas
// Reset the center point to the center of the canvas
var canvasCenter = new paper.Point(canvas.width/2, canvas.height/2);
paper.view.center = canvasCenter;
// Zoom to fit the whole image in the canvas
var returnedValues = panAndZoom.changeZoom(paper.view.zoom, -1, canvasCenter, canvasCenter, zoomFactor); // Always pass -1 as the delta, not entirely sure why
var newZoom = returnedValues[0];
var offset = returnedValues[1];
paper.view.zoom = newZoom;
paper.view.center = paper.view.center.add(offset);
}
};
var addImage = function(imageDataUrl) {
if(paper.view != null) {
var img = document.createElement("img");
img.src = imageDataUrl;
var presentMomentForId = new Date().getTime() + "-image"; // For purposes of having unique IDs
img.id = presentMomentForId;
img.hidden = true;
document.body.appendChild(img);
var raster = new paper.Raster(presentMomentForId);
registerItemEvents(raster);
}
};
var setUpLineAndFreeFormDrawing = function() {
if(paper.project != null) {
// Initial path object, will be reset for new paths after Alt is released
var path = newPath();
var paths = [];
paths.push(path);
// On mousedown add point to start from
paper.project.layers[0].on('mousedown', function(event) {
if(event.event.altKey && !event.event.ctrlKey) { // Alt key to add a path, but disallow attempting to add text at the same time
if(paths[paths.length-1].lastSegment == null) {
//path.add(event.point, event.point);
paths[paths.length-1].add(event.point, event.point);
} else {
//path.add(path.lastSegment.point, path.lastSegment.point);
paths[paths.length-1].add(paths[paths.length-1].lastSegment.point, paths[paths.length-1].lastSegment.point);
}
}
});
// On mousedrag add points to path
paper.project.layers[0].on('mousedrag', function(event) {
if(event.event.altKey && !event.event.ctrlKey) { // Alt key to add a path, but disallow attempting to add text at the same time
if(event.event.shiftKey) { // Use shift key for freeform
//path.add(event.point);
paths[paths.length-1].add(event.point);
} else { // Default of straight line added to path
//path.lastSegment.point = event.point;
paths[paths.length-1].lastSegment.point = event.point;
}
}
}.bind(this));
// Each time Alt comes up, start a new path
paper.tool.onKeyUp = function(event) {
if(event.key == "option") {
registerItemEvents(paths[paths.length-1]);
// Start a new path
paths.push(newPath());
}
};
}
};
// Establishes default line style
var newPath = function() {
var path = new paper.Path();
path.strokeColor = 'black';
path.strokeWidth = 10;
return path;
};
var note = "";
var setNote = function(newNote) {
note = newNote;
};
var setUpNotes = function() {
if(paper.project != null) {
paper.project.layers[0].on('mousedown', function(event) { // TODO should be layer 0 in long run?
if(event.event.ctrlKey && !event.event.altKey && !event.event.shiftKey) { // Only Ctrl key to add text
// Add text box
var textBox = new paper.PointText(event.point);
textBox.justification = 'left';
textBox.fillColor = 'black';
textBox.fontSize = 60;
textBox.content = note;
registerItemEvents(textBox);
}
});
}
};
var selectArea = function(startDragPoint, endDragPoint) {
var rasterTopLeftCorner = new paper.Point(raster.bounds.topLeft);
var adjustedStartDragPoint = new paper.Point(startDragPoint.x - rasterTopLeftCorner.x, startDragPoint.y - rasterTopLeftCorner.y);
var adjustedEndDragPoint = new paper.Point(endDragPoint.x - rasterTopLeftCorner.x, endDragPoint.y - rasterTopLeftCorner.y);
var boundingRectangleRasterCoordinates = new paper.Rectangle(adjustedStartDragPoint, adjustedEndDragPoint);
var boundingRectangleCanvasCoordinates = new paper.Rectangle(startDragPoint, endDragPoint);
var selectedArea = raster.getSubRaster(boundingRectangleRasterCoordinates);
var whitedOutSelection = new paper.Shape.Rectangle(boundingRectangleCanvasCoordinates);
whitedOutSelection.fillColor = 'white';
whitedOutSelection.insertAbove(raster); // Whiteout just above the image we're working with
registerItemEvents(selectedArea);
}
var whiteoutArea = function(startDragPoint, endDragPoint) {
var whitedOutSelection = new paper.Shape.Rectangle(startDragPoint, endDragPoint);
whitedOutSelection.fillColor = 'white';
whitedOutSelection.insertAbove(raster); // Whiteout just above the image we're working with
}
var flattenToDataUrl = function() {
layerAsRaster = paper.project.layers[0].rasterize(); // TODO should be layer 0 in long run? // Layer to Paper.js Raster object
layerAsRaster.visible = false;
var dataString = layerAsRaster.toDataURL();
return dataString;
};
module.exports = {
setCanvas: setCanvas,
setCanvasImage: setCanvasImage,
fitToPage: fitToPage,
addImage: addImage,
setNote: setNote,
flattenToDataUrl: flattenToDataUrl
};
Additionally, here's the SimplePanAndZoom.js file for clarity. It uses minimal Paper functions, it mainly just does calculations:
// Based on http://matthiasberth.com/articles/stable-zoom-and-pan-in-paperjs/
var SimplePanAndZoom = (function() {
function SimplePanAndZoom() { }
SimplePanAndZoom.prototype.changeZoom = function(oldZoom, delta, centerPoint, offsetPoint, zoomFactor) {
var newZoom = oldZoom;
if (delta < 0) {
newZoom = oldZoom * zoomFactor;
}
if (delta > 0) {
newZoom = oldZoom / zoomFactor;
}
// Zoom towards offsetPoint, not centerPoint (unless they're the same)
var a = null;
if(!centerPoint.equals(offsetPoint)) {
var scalingFactor = oldZoom / newZoom;
var difference = offsetPoint.subtract(centerPoint);
a = offsetPoint.subtract(difference.multiply(scalingFactor)).subtract(centerPoint);
}
return [newZoom, a];
};
SimplePanAndZoom.prototype.changeCenter = function(oldCenter, deltaX, deltaY, factor) {
var offset;
offset = new paper.Point(-deltaX, -deltaY);
offset = offset.multiply(factor);
return oldCenter.add(offset);
};
return SimplePanAndZoom;
})();
module.exports = SimplePanAndZoom;
Thanks.
I'm taking some guesses here but I'll address some problems in the code that will hopefully address the behavior you're seeing.
First, I presume paper.project.layers[0] is paper.project.activeLayer. Once that has been rasterized 1) the raster is added to the layer and setting visible = false does cause it to disappear when an update is done.
Second, when you invoke paper.setup(canvas) in imageElement.onload you create a new paper project. This project starts out as the active project and makes the previous project "disappear". So when you create a raster with raster = new paper.Raster(...) it goes into the new project, not the old project.
So now there is a hidden (.visible = false) raster in the old project (let's call it project1) and a new version of it in project2.
I'm not sure if this is the intended behavior or not, but when you invoke paper.setup(canvas) for what seems to be the second time then paper seems to notice that they both refer to the same canvas and keeps project1 and project2 in sync. So creating the second project clears the first project's children array. And adding new paper.Raster(...) ends up adding the raster to project1 and project2.
Now I can't tell what the next piece of the puzzle is. You'd need to add some information like 1) where the mouse event handlers are setup and what they are attached to, 2) what setUpNotes() does, 3) what registerCanvasEvents() does, and 4) what fitToPage does.
There are a few globals created, imageHeight and raster that probably aren't intentional. And it's not clear why you need to use new Image() at all - paper.Raster() accepts URLs, including data URLs.
I was surprised paper cleared the first project. It's curious.
Version 2:
Let me take a stab at structuring this using layers. I'd suggest you get rid of multiple projects because having mouse event handlers attached to multiple projects that share the same canvas adds too much complexity.
So, in your code initialization: paper.setup(canvas). Do this once and only once.
Setup the initial image in the single layer initially created by paper.
// this will be inserted into the current layer, project.activeLayer
var raster = new paper.Raster(imageURL, paper.view.bounds.center);
When the image in your queue changes do something like:
// make the existing image/layer invisible
paper.project.activeLayer.visible = false;
// add a new layer which is inserted in the project and activated
var layer = new paper.Layer();
// the new layer is activated, create a raster for the image
var raster = new paper.Raster(imageURL, paper.view.bounds.center);
// now do your normal logic for editing, zooming, etc.
It's really a bit more complicated than that because you have a queue of images and you only want to create a layer the first time you visit an image. You could initialize all the rasters at the outset, something like:
var imageURLs = ["url to image1", "url to image2", "etc"];
imageURLs.forEach(function(url) {
new paper.Layer();
paper.project.activeLayer.visible = false;
new paper.Raster(url, paper.view.bounds.center);
});
// make the first layer visible and activate it
paper.project.layers[0].visible = true;
paper.project.layers[0].activate();
The preceeding code gives you a parallel array to the images in your queue so switching images is straightforward - there is no checking to see if that image has been created or not:
function setImage(index) {
paper.project.activeLayer.visible = false;
paper.project.layers[index].activate();
paper.project.layers[index].visible = true;
}
Finally, I would make sure my mouse handling wasn't causing me problems. From the new code you posted it looks like each project had a global tool that handled 'mousedown', 'mousedrag', and 'mouseup' events, another set of handlers for activeLayer for 'mousedown', 'mousedrag', and 'mouseup' events, and also selectedItems has a handler for 'mousedrag'. I can't keep track of what all the different handlers are supposed to do across projects. I'm guessing that these are the root issue with the flickering you saw.
I would likely just use paper.view.on for 'mousedown', 'mousedrag', and 'mouseup' events. When I get an event I would check to see if anything on the layer was hit by using the following:
paper.project.activeLayer.hitTest(event.point);
Being able to set events on the view is new for paper but very useful. There may be a few other tweaks necessary to handle highlighting unselected items. A relatively straightforward way to handle that is to have a group of selected items and a group of unselected items:
unSelectedGroup.on('mouseenter', function() {
unSelectedGroup.selected = true;
});
unSelectedGroup.on('mouseleave', function() {
unSelectedGroup.selected = false;
});
These should be safe across layers when only one layer is visible at a time. I would set up these group handlers when setting up the images, whether all up front or on an as-needed basis. Alternatively, you could also add paper.view.on('mousemove', ...) and handle the 'mouseenter' and 'mouseleave' events yourself using hitTest as shown above, but either approach should work.
I think using a layer-based approach to your images will keep things in sync. There are enough problems with the project-based approach and many different mouse event handlers that you'll be on more stable ground regardless.
In our Angular app we're using highcarts-ng for our HighCharts implementation.
Here is the Chart Maximize and Minimize function, which works:
function expandChartPanel() {
vm.chartMaxed = !vm.chartMaxed;
viewHeader = ScopeFactory.getScope('viewHeader');
highChart = ScopeFactory.getScope('highChart');
var chart = highChart.chartObject;
var highChartContainer = document.getElementById("highchart-container");
var highChartContainerWidth = document.getElementById('highchart-container').clientWidth;
var highChartContainerHeight = document.getElementById('highchart-container').clientHeight;
var windowWidth = window.innerWidth;
var windowHeight = window.innerHeight;
if (vm.chartMaxed) {
vs.savedWidth = highChartContainerWidth;
vs.savedHeight = highChartContainerHeight;
console.log('savedWidth = ', vs.savedWidth);
console.log('savedHeight = ', vs.savedHeight);
root.chartExpanded = true;
viewHeader.vh.chartExpanded = true;
highChart.highChartMax = true;
highChartContainerHeight = document.getElementById('highchart-container').clientHeight;
windowWidth = window.innerWidth;
windowHeight = window.innerHeight;
highChart.chartConfig.size.width = windowWidth;
highChart.chartConfig.size.height = windowHeight - 220;
chart.setSize(windowWidth, windowHeight - 220);
}
else {
root.chartExpanded = false;
viewHeader.vh.chartExpanded = false;
highChart.highChartMax = false;
highChart.chartConfig.size.width = vs.savedWidth;
highChart.chartConfig.size.height = vs.savedHeight;
chart.setSize(vs.savedWidth, vs.savedHeight);
}
highChart.restoreChartSize();
}
Here is the reflow function:
function restoreChartSize() {
console.log('restoreChartSize');
if (!vs.chartObject.reflowNow) {
vs.chartObject.reflowNow = vs.chartObject.reflowNow = function() {
this.containerHeight = this.options.chart.height || window.window.HighchartsAdapter.adapterRun(this.renderTo, 'height');
this.containerWidth = this.options.chart.width || window.window.HighchartsAdapter.adapterRun(this.renderTo, 'width');
this.setSize(this.containerWidth, this.containerHeight, true);
this.hasUserSize = null;
}
}
vs.chartObject.reflowNow();
}
This reflow function above, works perfectly in this jsFiddle, but not in our app.
The full Gist file of our HighChartsDirective file.
After clicking Maximize, the chart will expand to the full size of the browser window, but then after dragging to resize the browser window, I call the restoreChartSize function, which activates the reflow.
However the size of the chart does not go to auto-size 100% 100%, it goes back to the previous size of the chart :(
Before Maximize:
After the Maximize function:
Now after resizing the browser window:
window.onresize = function(event) {
console.log('window resizing...');
highChart = ScopeFactory.getScope('highChart');
highChart.restoreChartSize();
console.log('highChart.chartConfig = ', highChart.chartConfig);
};
^ back to the smaller static sizes, not auto-size 100%
You can do this by adding a new method to chart that will manually trigger the reflow like so:
chart.reflowNow = function(){
this.containerHeight = this.options.chart.height || window.window.HighchartsAdapter.adapterRun(this.renderTo, 'height');
this.containerWidth = this.options.chart.width || window.window.HighchartsAdapter.adapterRun(this.renderTo, 'width');
this.setSize(this.containerWidth, this.containerHeight, false);
this.hasUserSize = null;
}
Then whenever you want to get away from manual resizing using setSize() just call chart.reflow()
Here's an working example: jsFiddle
Reference taken from: github-issue
UPDATE for ng-highcharts users
For doing this when using ng-highcharts library, you can simply pull out the chart object in the controller that has highcharts-ng dependency and add the reflowNow function, like so:
var chart = this.chartConfig.getHighcharts();
chart.reflowreflowNow = function (){ ... }
This is also the recommended way to pull out chart to do custom jobs by author of ng-highcharts as noted here and this fiddle.
I ended up finding an alternative solution to be the only thing I could get working, and it actually was pretty simple and straight forward to do. In case anyone else is looking for a fix for this, here's links to the resources that were useful and solved the issue for me.
You can simply add this to your chart config object, at the same level as the config.series or config.options. The comment references info but the actual solution that worked for me uses $timeout with 0 seconds, here
*For using highcharts-ng obviously
http://plnkr.co/edit/14x7gfQAlHw12XZVhWm0?p=preview
$scope.chartConfigObject = {
// function to trigger reflow in bootstrap containers
// see: http://jsfiddle.net/pgbc988d/ and https://github.com/pablojim/highcharts-ng/issues/211
func: function(chart) {
$timeout(function() {
chart.reflow();
//The below is an event that will trigger all instances of charts to reflow
//$scope.$broadcast('highchartsng.reflow');
}, 0);
}
};