Animating changes to an observable value - javascript

I'd like to animate a change to an individual ko.observable in the most MVVM/Knockoutesque way. I can handle the animation and view updates on my own:
function ViewModel() {
var self = this;
self.value = ko.observable("start value");
$("button").on("click", function () {
$("#text").animate(animateOutProperties,
{
complete: function () {
self.value($("#value").val());
$("#text").animate(animateInProperties);
}
});
});
}
The above works exactly as I want it to
However, the above does not take full advantage of two way data binding since I'm actually listening to an event and changes on the value itself. There's almost no point in using data-bind: text since I can just use jQuery to update the text at this point.
Using something like self.value.subscribe to listen to changes in the value would make more sense to me and I could use other bindings to update the value -- however, as far as I can tell there is no way to get both the old and new values at the same time.
I want to use something like beforeRemove and afterAdd, but those only work for adding and removing observableArray elements.
Is there a way to handle the above animation that fits better with the MVVM/two way data binding philosophy?

Related

Adding an event handler inside a knockoutjs custom binding

I'm a fairly experienced knockout user, so I understand quite a bit of the under the hood stuff, I have however been battling now for a few days trying to figure out how to achieve a given scenario.
I have to create a system that allows observable's within a given knockout component to be able to translate themselves to different languages.
to facilitate this, I've created a custom binding, which is applied to a given element in the following way.
<p data-bind="translatedText: {observable: translatedStringFour, translationToken: 'testUiTransFour'}"></p>
This is in turn attached to a property in my knockout component with a simple standard observable
private translatedStringFour: KnockoutObservable<string> = ko.observable<string>("I'm an untranslated string four....");
(YES, I am using typescript for the project, but TS/JS either I can work with.....)
With my custom binding I can still do 'translatedStringFour("foo")' and it will still update in exactly the same way as the normal text binding.
Where storing the translations in the HTML5 localStorage key/value store, and right at the beginning when our app is launched, there is another component that's responsible, for taking a list of translation ID's and requesting the translated strings from our app, based on the users chosen language.
These strings are then stored in localStorage using the translationToken (seen in the binding) as the key.
This means that when the page loads, and our custom bind fires, we can grab the translationToken off the binding, and interrogate localStorage to ask for the value to replace the untranslated string with, the code for our custom binding follows:
ko.bindingHandlers.translatedText = {
init: (element: HTMLElement, valueAccessor: Function, allBindings: KnockoutAllBindingsAccessor, viewModel: any, bindingContext: KnockoutBindingContext) => {
// Get our custom binding values
var value = valueAccessor();
var associatedObservable = value.observable;
var translationToken = value.translationToken;
},
update: (element: HTMLElement, valueAccessor: Function, allBindings: KnockoutAllBindingsAccessor, viewModel: any, bindingContext: KnockoutBindingContext) => {
// Get our custom binding values
var value = valueAccessor();
var associatedObservable = value.observable;
var translationToken = value.translationToken;
// Ask local storage if we have a token by that name
var translatedText = sessionStorage[translationToken];
// Check if our translated text is defined, if it's not then substitute it for a fixed string that will
// be seen in the UI (We should really not change this but this is for dev purposes so we can see whats missing)
if (undefined === translatedText) {
translatedText = "No Translation ID";
}
associatedObservable(translatedText);
ko.utils.setTextContent(element, associatedObservable());
}
}
Now, thus far this works brilliantly, as long as the full cache of translations has been loaded into localStorage, the observables will self translate with the correct strings as needed.
HOWEVER......
Because this translation loader may take more than a few seconds, and the initial page that it's loading on also needs to have some elements translated, the first time the page is loaded it is very possible that the translations the UI is asking for have not yet been loaded into into localStorage, or may be in the process of still loading.
Handling this is not a big deal, I'm performing the load using a promise, so the load takes place, my then clause fires, and I do something like
window.postMessage(...);
or
someElement.dispatchEvent(...);
or even (my favorite)
ko.postbox.publish(...)
The point here is I have no shortage of ways to raise an event/message of some description to notify the page and/or it's components that the translations have finished loading, and you are free to retry requesting them if you so wish.
HERE IN.... Lies my problem.
I need the event/message handler that receives this message to live inside the binding handler, so that the very act of me "binding" using our custom binding, will add the ability for this element to receive this event/message, and be able to retry.
This is not a problem for other pages in the application, because by the time the user has logged in, and all that jazz the translations will have loaded and be safely stored in local storage.
I'm more than happy to use post box (Absolutely awesome job by the way Ryan -- if your reading this.... it's an amazingly useful plugin, and should be built into the core IMHO) but, I intend to wrap this binding in a stand alone class which I'll then just load with requireJs as needed, by those components that need it. I cannot however guarantee that postbox will be loaded before or even at the same instant the binding is loaded.
Every other approach i've tried to get an event listener working in the binding have just gotten ignored, no errors or anything, they just don't fire.
I've tried using the postmessage api, I've tried using a custom event, I've even tried abusing JQuery, and all to no avail.
I've scoured the KO source code, specifically the event binding, and the closest I've come to attaching an event in the init handler is as follows:
init: (element: HTMLElement, valueAccessor: Function, allBindings: KnockoutAllBindingsAccessor, viewModel: any, bindingContext: KnockoutBindingContext) => {
// Get our custom binding values
var value = valueAccessor();
var associatedObservable = value.observable;
var translationToken = value.translationToken;
// Set up an event handler that will respond to events on session storage, by doing this
// the custom binding will instantly update when a key matching it's translation ID is loaded into the
// local session store
//ko.utils.registerEventHandler(element, 'storage', (event) => {
// console.log("Storage event");
// console.log(event);
//});
ko.utils.registerEventHandler(element, 'customEvent', (event) => {
console.log("HTML5 custom event recieved in the binding handler.");
console.log(event);
});
},
None of this has worked, so folks of the Knockout community.....
How do I add an event handler inside of a custom binding, that I can then trigger from outside that binding, but without depending on anything other than Knockout core and my binding being loaded.
Shawty
Update (About an hour later)
I wanted to add this part, beacuse it's not 100% clear why Regis's answer solves my problem.
Effectively, I was using exactly the same method, BUT (and this is the crucial part) I was targeting the "element" that came in as part of the binding.
This is my mind was the correct approach, as I wanted the event to stick specifically with the element the binding was applied too, as it was said element that I wanted to re-try it's translation once it knew it had the go-ahead.
However, after looking at Regis's code, and comparing it to mine, I noticed he was attaching his event handlers to the "Window" object, and not the "Element".
Following up on this, I too changed my code to use the window object, and everything I'd been attempting started to work.
More's the point, the element specific targeting works too, so I get the actual event, on the actual element, in the actual binding that needs to re-try it's translation.
[EDIT: trying to better answer the question]
I don't really get the whole point of the question, since I don't see how sessionStorage load can be asynchronous.
I supposed therefore sessionStorage is populated from som asynchronous functions like an ajax call to a translation API.
But I don't see what blocks you here, since you already have all the code in your question:
var sessionStorageMock = { // mandatory to mock in code snippets: initially empty
};
var counter = 0;
var attemptTranslation = function() {
setInterval(function() { // let's say it performs some AJAX calls which result is cached in the sessionStorage
var token = "token"; // that should be a collection
sessionStorageMock[token] = "after translation " + (counter++); // we're done, notifying event handlers
window.dispatchEvent(new Event("translation-" + token));
}, 500);
};
ko.bindingHandlers.translated = {
init: function(element, valueAccessor, allBindings, viewModel, bindingContext) {
var val = valueAccessor();
var token = val.token;
console.log("init");
window.addEventListener("translation-" + token, function() {
if (token && sessionStorageMock[token]) {
val.observable(sessionStorageMock[token]);
}
});
}
};
var vm = function() {
this.aftertranslation = ko.observable("before translation");
};
ko.applyBindings(new vm());
attemptTranslation();
<script src="https://cdnjs.cloudflare.com/ajax/libs/knockout/3.2.0/knockout-min.js"></script>
<div data-bind="translated: { observable: aftertranslation, token: 'token' }, text: aftertranslation" />

How to animate unchanged ng-repeat with AngularJS

I have a template that looks like this:
<p ng-repeat="item in myobj.items" class="toAnimate">{{item}}</p>
and I would like to use the animate module do a jQueryUI addClass/removeClass animation on the element using the JavaScript method described in the docs:
ngModule.animation('.toAnimate', function() {
return {
enter: function(element) {
element.addClass('pulse').removeClass('pulse', 2000);
}
};
});
This works beautifully, but the problem is that, since I want to use the p.toAnimate element to display status messages, it will not change the content according to angular.
To break it down a little further, say I have a name field. When I click Save the message Name was saved successfully. is displayed. Now if I modify the name and click save again, assuming the save was successful, the message should be re-displayed to give the user feedback of the newly edited name. The pulse does not happen, however, because the items in myobj.items didn't technically change.
I realize that I could remove the item after a period of time (and that is probably the route I will take to implement the real solution), but I'm still interested to see if this sort of thing can be done using AngularJS.
What I want to do is register with angular that the message should be treated as new even though it is not. Is there any way to do this?
A fiddle to go along with this: http://jsfiddle.net/Jw3AT/
UPDATE
There is a problem with the $scope.$$phase approach in my answer, so I'm still looking for the "right" way to do this. Basically, $scope.$$phase is always returning $digest, which causes the conditional to fail. Removing the conditional gives the correct result in the interface, but throws a $rootScope:inprog.
One solution I found is to add a $apply in the middle of the controller function:
$scope.updateThingy = function () {
$scope.myobj.items = [];
if (!$scope.$$phase) {
$scope.$apply();
}
$scope.myobj.items = ['Your name was updated.'];
};
Updated fiddle: http://jsfiddle.net/744Rv/
May not be the best way, but it's an answer.

How to limit the number change events when multiple attributes are set?

I have noticed that when multiple attributes of a Backbone model are set like so
model.set({
att1:val1,
att2:val2
});
two change events are triggered. I was wrongly assuming that only one change event would be triggered after all the attributes had been set.
This might not seem like a problem, but it is when a function is bound to att1 that also uses the value of att2. In other words, when you do this
model.bind('change:att1', func1);
...
func1 = function() {
var att2 = model.get('att2');
}
the variable att2 will be set to the old value of the model's attribute att2.
The question is how to prevent this in an elegant manner. Of course, one option is to set att2 before setting att1 or to bind to att2 (instead of att1), but it seems that this is only a viable option in simple situations. The latter option also assumes that the attributes are set in the order in which they are listed in the set method (which is the case I think).
I have run into this issue several times hence my question. The issue is that it took me some time to realize what was actually happening.
On a final note, just like you can pass {silent:true} as an option of the set method, it would be nice to have an option {group:true} (or something like that) indicating that the change events should only be fired after all the attributes have been set.
In more complex situations i'd go for custom events.
instead of binding to a change:att1 or change:att2 i'd look for a specific custom event, that you trigger after you have set all attributes you wanted to change on the model.
model.set({
att1:val1,
att2:val2
});
model.trigger('contact:updated'); // you can chose your custom event name yourself
model.bind('contact:updated', func1);
...
func1 = function() {
var att2 = model.get('att2');
}
downside on this idea is you have to add a new line of code everywhere you want to trigger the event. if this happens alot you might like to change or override the model.set() to do it for you, but then you're already changing backbone code, don't know how you feel about that.
EDIT
after looking into the sourcecode of backbone, i noticed the change event is triggered right after the change:attribute triggers. (proven by the snippit below)
// Fire `change:attribute` events.
for (var attr in changes) {
if (!options.silent) this.trigger('change:' + attr, this, changes[attr], options);
}
// Fire the `"change"` event, if the model has been changed.
if (!alreadyChanging) {
if (!options.silent && this._changed) this.change(options);
this._changing = false;
}
while the this.change(options); refers to this:
change: function(options) {
this.trigger('change', this, options);
this._previousAttributes = _.clone(this.attributes);
this._changed = false;
},
so if you would be binding to the change event instead of the specific change:argument event, you will arrive at a callback function after both (or all) attributes are changed.
the only downside is, it will trigger on ANY change, even if you change a third or fourth attribute. you need to calculate that in...
small example of how it works on jsfiddle http://jsfiddle.net/saelfaer/qm8xY/

Prevent single attribute from firing this.bind("change")

In Backbone.js, I have a model I am binding a change event to, but I want to prevent this from happening on specific attribute changes. For example, I want it to fire for every single time model.set() is called, except when calling model.set({arbitraryName: value}).
Here's what I have:
this.bind("change", function() {
this.update();
});
But I have no clue how to determine what is being set--any ideas?
EDIT
It looks like I can call
model.set({arbitraryName: value}, {silent: true})
to prevent the change event from firing (which works for what I need), but what if I have something bound like:
this.bind("change:arbitraryName", functionName)
You can consider using hasChanged in the event handler?
var self = this;
this.bind("change", function() {
if(!self.hasChanged("someAttribute")){
self.update();
}
});
I'm not sure I understand your question completely. Please notice the difference of the above, and the below.
this.bind("change:someAttribute", function(){
self.update();
});
The first one will fire update on any change where someAttribute remains constant. The second one will fire update on any change to someAttribute.
Hope this helps.

Binding multiple events of the same type?

Firstly, is it possible? Been struggling with this one for hours; I think the reason my events aren't firing is because one event is unbinding/overwriting the other. I want to bind two change events to the same element. How can I do that?
As per request, here's the function I'm struggling with:
(function($) {
$.fn.cascade = function(name, trigger, url) {
var cache = {};
var queue = {};
this.each(function() {
var $input = $(this);
var $trigger = $input.closest('tr').prev('tr').find(trigger);
//$input.hide();
var addOptions = function($select, options) {
$select.append('<option value="">- Select -</option>');
for(var i in options) {
$select.append('<option value="{0}">{1}</option>'.format(options[i][0], options[i][1]));
}
$select.val($input.val()).trigger('change');
}
var $select = $('<select>')
// copy classes
.attr('class', $input.attr('class'))
// update hidden input
.bind('change', function() {
$input.val($(this).val());
})
// save data for chaining
.data('name', name)
.data('trigger', $trigger);
$input.after($select);
$trigger.bind('change', function() {
var value = $(this).val();
$select.empty();
if(value == '' || value == null) {
$select.trigger('change');
return;
}
// TODO: cache should be a jagged multi-dimensional array for nested triggers
if(value in cache) {
addOptions($select, cache[value]);
} else if(value in queue) {
$select.addClass('loading');
queue[value].push($select);
} else {
var getDict = {}
getDict[name] = value;
// TODO: use recursion to chain up more than one level of triggers
if($(this).data('trigger')) {
getDict[$(this).data('name')] = $(this).data('trigger').val();
}
$select.addClass('loading');
queue[value] = [$select];
$.getJSON(url, getDict, function(options) {
cache[value] = options;
while(queue[value].length > 0) {
var $select = queue[value].pop();
$select.removeClass('loading');
addOptions($select, options);
}
});
}
}).trigger('change');
});
return this;
}
})(jQuery);
The relevant chunk of HTML is even longer... but essentially it's a select box with a bunch of years, and then an <input> that gets (visibly) replaced with a <select> showing the vehicle makes for that year, and then another <input> that gets replaced with the models for that make/year.
Actually, it seems to be running pretty well now except for on page load. The initial values are getting wiped.
Solved the issue by pulling out that $select.bind() bit and making it live:
$('select.province').live('change', function() {
$(this).siblings('input.province').val($(this).val());
});
$('select.make').live('change', function() {
$(this).siblings('input.make').val($(this).val());
});
$('select.model').live('change', function() {
$(this).siblings('input.model').val($(this).val());
});
Sucks that it's hard-coded in there for my individual cases though. Ideally, I'd like to encapsulate all the logic in that function. So that I can just have
$('input.province').cascade('country', 'select.country', '/get-provinces.json');
$('input.make').cascade('year', 'select.year', '/get-makes.json');
$('input.model').cascade('make', 'select.make', '/get-models.json');
Yes that is possible.
$(…).change(function () { /* fn1 */ })
.change(function () { /* fn2 */ });
jQuery event binding is additive, calling .change a second time does not remove the original event handler.
Ryan is correct in jQuery being additive, although if you find there are problems because you are chaining the same event, beautiful jQuery allows another approach, and that is calling the second function within the first after completion of the first as shown below.
$('input:checkbox').change(function() {
// Do thing #1.; <-- don't forget your semi-colon here
(function() {
// Do thing #2.
});
});
I use this technique frequently with form validation, one function for checking and replacing disallowed characters input, and the second for running a regex on the results of the parent function.
Update to Post:
OK... You all are quick to beat on me with your negative scores, without understanding the difference in how we each view Mark's request. I will proceed to explain by example why my approach is the better one, as it allows for the greatest flexibility and control. I have thrown up a quick example at the link below. A picture's worth a 1000 words.
Nested Functions on One Event Trigger
This example shows how you can tie in three functions to just one change event, and also how the second and third functions can be controlled independently, even though they are still triggered by the parent change event. This also shows how programmatically the second and third functions can BOTH be tied into the same parent function trigger, yet respond either with or independently (see this by UNCHECKING the checkbox) of the parent function it is nested within.
$('#thecheckbox').change(function() {
$("#doOne").fadeIn();
if ($('#thecheckbox').attr('checked')) { doFunc2() }
else { doFunc3() };
function doFunc2() { $("#doTwo").fadeIn(); return true; }
function doFunc3() { $("#doTwo").fadeOut(); return true; }
$("#doThree").fadeIn();
});
I've included the third 'Do thing #3 in the example, to show how yet another event can follow the two nested functions as described earlier.
Forgive the earlier bad pseudocode originally posted first, as I always use ID's with my jQuery because of their ability to give everything an individual status to address with jQuery. I never use the 'input:checkbox' method in my own coding, as this relies on the 'type' attribute of an input statement, and therefore would require extra processing to isolate any desired checkbox if there is more than one checkbox in the document. Hopefully, the example will succeed at articulating what my comments here have not.
I am actually not sure exactly if you can bind two different change events. But, why not use logic to complete both events? For example...
$('input:checkbox').change(function() {
// Do thing #1.
// Do thing #2.
});
That way, you get the same benefit. Now, if there are two different things you need to do, you may need to use logic so that only one or the other thing happens, but I think you would have to do that anyway, even if you can bind two change events to the same element.

Categories

Resources