'load' event not firing when iframe is loaded in Chrome - javascript

I am trying to display a 'mask' on my client while a file is dynamically generated server side. Seems like the recommend work around for this (since its not ajax) is to use an iframe and listen from the onload or done event to determine when the file has actually shipped to the client from the server.
here is my angular code:
var url = // url to my api
var e = angular.element("<iframe style='display:none' src=" + url + "></iframe>");
e.load(function() {
$scope.$apply(function() {
$scope.exporting = false; // this will remove the mask/spinner
});
});
angular.element('body').append(e);
This works great in Firefox but no luck in Chrome. I have also tried to use the onload function:
e.onload = function() { //unmask here }
But I did not have any luck there either.
Ideas?

Unfortunately it is not possible to use an iframe's onload event in Chrome if the content is an attachment. This answer may provide you with an idea of how you can work around it.

I hate this, but I couldn't find any other way than checking whether it is still loading or not except by checking at intervals.
var timer = setInterval(function () {
iframe = document.getElementById('iframedownload');
var iframeDoc = iframe.contentDocument || iframe.contentWindow.document;
// Check if loading is complete
if (iframeDoc.readyState == 'complete' || iframeDoc.readyState == 'interactive') {
loadingOff();
clearInterval(timer);
return;
}
}, 4000);

You can do it in another way:
In the main document:
function iframeLoaded() {
$scope.$apply(function() {
$scope.exporting = false; // this will remove the mask/spinner
});
}
var url = // url to my api
var e = angular.element("<iframe style='display:none' src=" + url + "></iframe>");
angular.element('body').append(e);
In the iframe document (this is, inside the html of the page referenced by url)
window.onload = function() {
parent.iframeLoaded();
}
This will work if the main page, and the page inside the iframe are in the same domain.
Actually, you can access the parent through:
window.parent
parent
//and, if the parent is the top-level document, and not inside another frame
top
window.top
It's safer to use window.parent since the variables parent and top could be overwritten (usually not intended).

you have to consider 2 points:
1- first of all, if your url has different domain name, it is not possible to do this except when you have access to the other domain to add the Access-Control-Allow-Origin: * header, to fix this go to this link.
2- but if it has the same domain or you have added Access-Control-Allow-Origin: * to the headers of your domain, you can do what you want like this:
var url = // url to my api
var e = angular.element("<iframe style='display:none' src=" + url + "></iframe>");
angular.element(document.body).append(e);
e[0].contentWindow.onload = function() {
$scope.$apply(function() {
$scope.exporting = false; // this will remove the mask/spinner
});
};
I have done this in all kinds of browsers.

I had problems with the iframe taking too long to load. The iframe registered as loaded while the request wasn't handled. I came up with the following solution:
JS
Function:
function iframeReloaded(iframe, callback) {
let state = iframe.contentDocument.readyState;
let checkLoad = setInterval(() => {
if (state !== iframe.contentDocument.readyState) {
if (iframe.contentDocument.readyState === 'complete') {
clearInterval(checkLoad);
callback();
}
state = iframe.contentDocument.readyState;
}
}, 200)
}
Usage:
iframeReloaded(iframe[0], function () {
console.log('Reloaded');
})
JQuery
Function:
$.fn.iframeReloaded = function (callback) {
if (!this.is('iframe')) {
throw new Error('The element is not an iFrame, please provide the correct element');
}
let iframe = this[0];
let state = iframe.contentDocument.readyState;
let checkLoad = setInterval(() => {
if (state !== iframe.contentDocument.readyState) {
if (iframe.contentDocument.readyState === 'complete') {
clearInterval(checkLoad);
callback();
}
state = iframe.contentDocument.readyState;
}
}, 200)
}
Usage:
iframe.iframeReloaded(function () {
console.log('Reloaded');
})

I've just noticed that Chrome is not always firing the load event for the main page so this could have an effect on iframes too as they are basically treated the same way.
Use Dev Tools or the Performance api to check if the load event is being fired at all.
I just checked http://ee.co.uk/ and if you open the console and enter window.performance.timing you'll find the entries for domComplete, loadEventStart and loadEventEnd are 0 - at least at this current time:)
Looks like there is a problem with Chrome here - I've checked it on 2 PCs using the latest version 31.0.1650.63.
Update: checked ee again and load event fired but not on subsequent reloads so this is intermittent and may possibly be related to loading errors on their site. But the load event should fire whatever.
This problem has occurred on 5 or 6 sites for me now in the last day since I noticed my own site monitoring occasionally failed. Only just pinpointed the cause to this. I need some beauty sleep then I'll investigate further when I'm more awake.

Related

Send gtag event from cross domain to parent domain

I'm trying to setup a send event from a iframe originated on my domain and placed on other domain (not mine). I placed the analytics code on the iframe.
<script async src="https://www.googletagmanager.com/gtag/js?id=UA-XXXXXXXX-XX"></script>
<script>
window.dataLayer = window.dataLayer || [];
function gtag(){dataLayer.push(arguments);}
gtag('js', new Date());
gtag('config', 'UA-XXXXXXXX-XX',{ 'anonymize_ip': true });
</script>
Bellow that analytics code (with the UA-XXXXXXXX-XX from my parentdomain.com), I do a check to see if the iframe is not on my parentdomain.com and then, I set the tracker attribute to the div id ads_close:
<script>
ref = document.referrer;
whitelist = ["parentdomain.com"];
match = false;
for( var i = whitelist.length - 1; i >= 0; i-- ) {
if( ref.indexOf( whitelist[ i ] ) > -1 ) { match = true; }
}
// If is not the parent domain, then add the onClick atributte to the ID "ads_close"
if( ! match ) {
refer = document.referrer;
var str1 ="gtag(\'event\', \'External\', {\'event_category\': \'yes\',\'event_label\': ";
var str2 = "'";
var str3 = refer;
var str4 = "'";
var str5 = "});";
var tracker = str1.concat(str2) + str3 + str4 + str5;
ads_close.setAttribute("onClick", tracker);
}
</script>
The above code renders this way, IF NOT, on parentdomain.com:
<div class="adspop_close" id="adspop_close" onclick="gtag('event', 'Externos', {'event_category': 'yes','event_label': 'https://www.theotherdomain.com/post/'});"></div>
The problem:
Every time i click on the the div with the ID adspop_close, I cannot see the event on my parentdomain.com google analytics account...
The question:
What am'I doing wrong?
If you try to track data from the iframe itself it will appear as if the interaction is happening on another domain in another session, which is what I think you're trying to avoid. If you want to track interactions in an iframe and act as if they were part of the parent container then the best way is by using postMessage to communicate the event to the parent, where it can be handled naturally. The containing page does not have script access to the iframe for security reasons, but the iframe can send communicate to the containing page via postMessage.
solution 1
The Google Development Guide shows us an approach for this cross-domain interaction (scroll down to the IFRAME section).
To link the interactions into the same session you need to share client id's. Unortunately, iframes typically initalize with the HTML of the page, long before google tracking has the client ID ready. So we can't just pass it on load, but need to wait for everything and then use postMessage.
Here's the containing page code example:
<iframe id="destination-frame" src="https://destination.com"></iframe>
<script>
ga('create', 'UA-XXXXX-Y', 'auto');
ga(function(tracker) {
// Gets the client ID of the default tracker.
var clientId = tracker.get('clientId');
// Gets a reference to the window object of the destionation iframe.
var frameWindow = document.getElementById('destination-frame').contentWindow;
// Sends the client ID to the window inside the destination frame.
frameWindow.postMessage(clientId, 'https://destination.com');
});
</script>
And here's the listener that would be in the iframe:
window.addEventListener('message', function(event) {
// Ignores messages from untrusted domains.
if (event.origin != 'https://destination.com') return;
ga('create', 'UA-XXXXX-Y', 'auto', {
clientId: event.data
});
});
That page also has some extra logic to handle the situation where a client id never comes through postMessage. If you need to pass through the 'UA' string as well and wait to initialize gtag in the iframe completely, that's doable as well. Once you recieve the data you need, initialize gtag and track away. You won't need to rewrite any DOM.
solution 2
You can invert the logic of the postMessage communication instead. Rather than doing any tracking in the iframe at all, you can set up any events to trigger a postMessage instead, passing the information like category, action, and label up to the containing page. In the containing page you would add a listener for the postMessage and handle it by triggering a gtag event.
For instance, from the iframe:
<script>
try {
var postObject = JSON.stringify({
event: 'iframeClickEvent',
category: 'someCategory',
action: 'someAction',
label: 'someLabel'
});
parent.postMessage(postObject, 'https://www.YOURWEBSITE.com');
} catch(e) {
window.console && window.console.log(e);
}
</script>
and the containing page:
window.addEventListener('message', function(message) {
try{
var data = JSON.parse(message.data);
var dataLayer = window.dataLayer || (window.dataLayer = []);
if (data.event === 'iframeClickEvent') {
dataLayer.push({ 'event': 'someEvent', .... });
}
} catch(e){}
});

Redirect javascript failing in all but Chrome

Trying to have a webpage manage a redirect, if a deeplink fails to open. If the deeplink opens, great. if it doesn't within 2 seconds, I want it to go to my website.
<script type="javascript">
setTimeout(function () { window.location = "http://mywebsite.com"; }, 25);
window.location = "my://app";
</script>
I've tested in Chrome and it works, but Firefox, IE, and Safari all block the script.
Anyone have any idea on how to handle this?
window.location.assign("http:mywebsite.com") may be a better alternative as I believe calling that function fires some additional events that may make the lifecycle of the page easy to manage.
Also in about all except Chrome you can use an IFrame to attempt to launch your protocol handler. This will help prevent the page going to about:blank and/or your script stopping due to navigating away from the page.
var createIframe = function(id, url, timeout, callback) {
var iframe;
iframe = document.createElement("iframe");
iframe.hidden = true;
iframe.id = id;
iframe.src = url;
var data = {}
data.id = id;
data.iframe = iframe;
return setTimeout(callback, timeout, null, data);
}
createIframe('tempFrame', 'http://mywebsite.com', 25, function(err, data) {
if(!err && data){
var iframe = data.iframe;
var id = data.id;
iframe = document.getElementById(id);
iframe.parent.removeChild(iframe);
}
else {
console.log('There was an error createing and removeing the iframe');
}
}

Not able to check popup blocker is enabled or not in chrome [duplicate]

I am aware of javascript techniques to detect whether a popup is blocked in other browsers (as described in the answer to this question). Here's the basic test:
var newWin = window.open(url);
if(!newWin || newWin.closed || typeof newWin.closed=='undefined')
{
//POPUP BLOCKED
}
But this does not work in Chrome. The "POPUP BLOCKED" section is never reached when the popup is blocked.
Of course, the test is working to an extent since Chrome doesn't actually block the popup, but opens it in a tiny minimized window at the lower right corner which lists "blocked" popups.
What I would like to do is be able to tell if the popup was blocked by Chrome's popup blocker. I try to avoid browser sniffing in favor of feature detection. Is there a way to do this without browser sniffing?
Edit: I have now tried making use of newWin.outerHeight, newWin.left, and other similar properties to accomplish this. Google Chrome returns all position and height values as 0 when the popup is blocked.
Unfortunately, it also returns the same values even if the popup is actually opened for an unknown amount of time. After some magical period (a couple of seconds in my testing), the location and size information is returned as the correct values. In other words, I'm still no closer to figuring this out. Any help would be appreciated.
Well the "magical time" you speak of is probably when the popup's DOM has been loaded. Or else it might be when everything (images, outboard CSS, etc.) has been loaded. You could test this easily by adding a very large graphic to the popup (clear your cache first!). If you were using a Javascript Framework like jQuery (or something similar), you could use the ready() event (or something similar) to wait for the DOM to load before checking the window offset. The danger in this is that Safari detection works in a conflicting way: the popup's DOM will never be ready() in Safari because it'll give you a valid handle for the window you're trying to open -- whether it actually opens or not. (in fact, i believe your popup test code above won't work for safari.)
I think the best thing you can do is wrap your test in a setTimeout() and give the popup 3-5 seconds to complete loading before running the test. It's not perfect, but it should work at least 95% of the time.
Here's the code I use for cross-browser detection, without the Chrome part.
function _hasPopupBlocker(poppedWindow) {
var result = false;
try {
if (typeof poppedWindow == 'undefined') {
// Safari with popup blocker... leaves the popup window handle undefined
result = true;
}
else if (poppedWindow && poppedWindow.closed) {
// This happens if the user opens and closes the client window...
// Confusing because the handle is still available, but it's in a "closed" state.
// We're not saying that the window is not being blocked, we're just saying
// that the window has been closed before the test could be run.
result = false;
}
else if (poppedWindow && poppedWindow.test) {
// This is the actual test. The client window should be fine.
result = false;
}
else {
// Else we'll assume the window is not OK
result = true;
}
} catch (err) {
//if (console) {
// console.warn("Could not access popup window", err);
//}
}
return result;
}
What I do is run this test from the parent and wrap it in a setTimeout(), giving the child window 3-5 seconds to load. In the child window, you need to add a test function:
function test() {}
The popup blocker detector tests to see whether the "test" function exists as a member of the child window.
ADDED JUNE 15 2015:
I think the modern way to handle this would be to use window.postMessage() to have the child notify the parent that the window has been loaded. The approach is similar (child tells parent it's loaded), but the means of communication has improved. I was able to do this cross-domain from the child:
$(window).load(function() {
this.opener.postMessage({'loaded': true}, "*");
this.close();
});
The parent listens for this message using:
$(window).on('message', function(event) {
alert(event.originalEvent.data.loaded)
});
Hope this helps.
Just one improvement to InvisibleBacon's snipet (tested in IE9, Safari 5, Chrome 9 and FF 3.6):
var myPopup = window.open("popupcheck.htm", "", "directories=no,height=150,width=150,menubar=no,resizable=no,scrollbars=no,status=no,titlebar=no,top=0,location=no");
if (!myPopup)
alert("failed for most browsers");
else {
myPopup.onload = function() {
setTimeout(function() {
if (myPopup.screenX === 0) {
alert("failed for chrome");
} else {
// close the test window if popups are allowed.
myPopup.close();
}
}, 0);
};
}
The following is a jQuery solution to popup blocker checking. It has been tested in FF (v11), Safari (v6), Chrome (v23.0.127.95) & IE (v7 & v9). Update the _displayError function to handle the error message as you see fit.
var popupBlockerChecker = {
check: function(popup_window){
var _scope = this;
if (popup_window) {
if(/chrome/.test(navigator.userAgent.toLowerCase())){
setTimeout(function () {
_scope._is_popup_blocked(_scope, popup_window);
},200);
}else{
popup_window.onload = function () {
_scope._is_popup_blocked(_scope, popup_window);
};
}
}else{
_scope._displayError();
}
},
_is_popup_blocked: function(scope, popup_window){
if ((popup_window.innerHeight > 0)==false){ scope._displayError(); }
},
_displayError: function(){
alert("Popup Blocker is enabled! Please add this site to your exception list.");
}
};
Usage:
var popup = window.open("http://www.google.ca", '_blank');
popupBlockerChecker.check(popup);
Hope this helps! :)
Rich's answer isn't going to work anymore for Chrome. Looks like Chrome actually executes any Javascript in the popup window now. I ended up checking for a screenX value of 0 to check for blocked popups. I also think I found a way to guarantee that this property is final before checking. This only works for popups on your domain, but you can add an onload handler like this:
var myPopup = window.open("site-on-my-domain", "screenX=100");
if (!myPopup)
alert("failed for most browsers");
else {
myPopup.onload = function() {
setTimeout(function() {
if (myPopup.screenX === 0)
alert("failed for chrome");
}, 0);
};
}
As many have reported, the "screenX" property sometimes reports non-zero for failed popups, even after onload. I experienced this behavior as well, but if you add the check after a zero ms timeout, the screenX property always seems to output a consistent value.
Let me know if there are ways to make this script more robust. Seems to work for my purposes though.
This worked for me:
cope.PopupTest.params = 'height=1,width=1,left=-100,top=-100,location=no,toolbar=no,menubar=no,scrollbars=no,resizable=no,directories=no,status=no';
cope.PopupTest.testWindow = window.open("popupTest.htm", "popupTest", cope.PopupTest.params);
if( !cope.PopupTest.testWindow
|| cope.PopupTest.testWindow.closed
|| (typeof cope.PopupTest.testWindow.closed=='undefined')
|| cope.PopupTest.testWindow.outerHeight == 0
|| cope.PopupTest.testWindow.outerWidth == 0
) {
// pop-ups ARE blocked
document.location.href = 'popupsBlocked.htm';
}
else {
// pop-ups are NOT blocked
cope.PopupTest.testWindow.close();
}
The outerHeight and outerWidth are for chrome because the 'about:blank' trick from above doesn't work in chrome anymore.
I'm going to just copy/paste the answer provided here: https://stackoverflow.com/a/27725432/892099 by DanielB . works on chrome 40 and it's very clean. no dirty hacks or waiting involves.
function popup(urlToOpen) {
var popup_window=window.open(urlToOpen,"myWindow","toolbar=no, location=no, directories=no, status=no, menubar=no, scrollbars=yes, resizable=yes, copyhistory=yes, width=400, height=400");
try {
popup_window.focus();
}
catch (e) {
alert("Pop-up Blocker is enabled! Please add this site to your exception list.");
}
}
How about a Promise approach ?
const openPopUp = (...args) => new Promise(s => {
const win = window.open(...args)
if (!win || win.closed) return s()
setTimeout(() => (win.innerHeight > 0 && !win.closed) ? s(win) : s(), 200)
})
And you can use it like the classic window.open
const win = await openPopUp('popuptest.htm', 'popuptest')
if (!win) {
// popup closed or blocked, handle alternative case
}
You could change the code so that it fail the promise instead of returning undefined, I just thought that if was an easier control flow than try / catch for this case.
Check the position of the window relative to the parent. Chrome makes the window appear almost off-screen.
I had a similar problem with popups not opening in Chrome. I was frustrated because I wasn't trying to do something sneaky, like an onload popup, just opening a window when the user clicked. I was DOUBLY frustrated because running my function which included the window.open() from the firebug command line worked, while actually clicking on my link didn't! Here was my solution:
Wrong way: running window.open() from an event listener (in my case, dojo.connect to the onclick event method of a DOM node).
dojo.connect(myNode, "onclick", function() {
window.open();
}
Right way: assigning a function to the onclick property of the node that called window.open().
myNode.onclick = function() {
window.open();
}
And, of course, I can still do event listeners for that same onclick event if I need to. With this change, I could open my windows even though Chrome was set to "Do not allow any site to show pop-ups". Joy.
If anyone wise in the ways of Chrome can tell the rest of us why it makes a difference, I'd love to hear it, although I suspect it's just an attempt to shut the door on malicious programmatic popups.
Here's a version that is currently working in Chrome. Just a small alteration away from Rich's solution, though I added in a wrapper that handles the timing too.
function checkPopupBlocked(poppedWindow) {
setTimeout(function(){doCheckPopupBlocked(poppedWindow);}, 5000);
}
function doCheckPopupBlocked(poppedWindow) {
var result = false;
try {
if (typeof poppedWindow == 'undefined') {
// Safari with popup blocker... leaves the popup window handle undefined
result = true;
}
else if (poppedWindow && poppedWindow.closed) {
// This happens if the user opens and closes the client window...
// Confusing because the handle is still available, but it's in a "closed" state.
// We're not saying that the window is not being blocked, we're just saying
// that the window has been closed before the test could be run.
result = false;
}
else if (poppedWindow && poppedWindow.outerWidth == 0) {
// This is usually Chrome's doing. The outerWidth (and most other size/location info)
// will be left at 0, EVEN THOUGH the contents of the popup will exist (including the
// test function we check for next). The outerWidth starts as 0, so a sufficient delay
// after attempting to pop is needed.
result = true;
}
else if (poppedWindow && poppedWindow.test) {
// This is the actual test. The client window should be fine.
result = false;
}
else {
// Else we'll assume the window is not OK
result = true;
}
} catch (err) {
//if (console) {
// console.warn("Could not access popup window", err);
//}
}
if(result)
alert("The popup was blocked. You must allow popups to use this site.");
}
To use it just do this:
var popup=window.open('location',etc...);
checkPopupBlocked(popup);
If the popup get's blocked, the alert message will display after the 5 second grace period (you can adjust that, but 5 seconds should be quite safe).
This fragment incorporates all of the above - For some reason - StackOverflow is excluding the first and last lines of code in the code block below, so I wrote a blog on it. For a full explanation and the rest of the (downloadable) code have a look at
my blog at thecodeabode.blogspot.com
var PopupWarning = {
init : function()
{
if(this.popups_are_disabled() == true)
{
this.redirect_to_instruction_page();
}
},
redirect_to_instruction_page : function()
{
document.location.href = "http://thecodeabode.blogspot.com";
},
popups_are_disabled : function()
{
var popup = window.open("http://localhost/popup_with_chrome_js.html", "popup_tester", "width=1,height=1,left=0,top=0");
if(!popup || popup.closed || typeof popup == 'undefined' || typeof popup.closed=='undefined')
{
return true;
}
window.focus();
popup.blur();
//
// Chrome popup detection requires that the popup validates itself - so we need to give
// the popup time to load, then call js on the popup itself
//
if(navigator && (navigator.userAgent.toLowerCase()).indexOf("chrome") > -1)
{
var on_load_test = function(){PopupWarning.test_chrome_popups(popup);};
var timer = setTimeout(on_load_test, 60);
return;
}
popup.close();
return false;
},
test_chrome_popups : function(popup)
{
if(popup && popup.chrome_popups_permitted && popup.chrome_popups_permitted() == true)
{
popup.close();
return true;
}
//
// If the popup js fails - popups are blocked
//
this.redirect_to_instruction_page();
}
};
PopupWarning.init();
Wow there sure are a lot of solutions here. This is mine, it uses solutions taken from the current accepted answer (which doesn't work in latest Chrome and requires wrapping it in a timeout), as well as a related solution on this thread (which is actually vanilla JS, not jQuery).
Mine uses a callback architecture which will be sent true when the popup is blocked and false otherwise.
window.isPopupBlocked = function(popup_window, cb)
{
var CHROME_CHECK_TIME = 2000; // the only way to detect this in Chrome is to wait a bit and see if the window is present
function _is_popup_blocked(popup)
{
return !popup.innerHeight;
}
if (popup_window) {
if (popup_window.closed) {
// opened OK but was closed before we checked
cb(false);
return;
}
if (/chrome/.test(navigator.userAgent.toLowerCase())) {
// wait a bit before testing the popup in chrome
setTimeout(function() {
cb(_is_popup_blocked(popup_window));
}, CHROME_CHECK_TIME);
} else {
// for other browsers, add an onload event and check after that
popup_window.onload = function() {
cb(_is_popup_blocked(popup_window));
};
}
} else {
cb(true);
}
};
Jason's answer is the only method I can think of too, but relying on position like that is a little bit dodgy!
These days, you don't really need to ask the question “was my unsolicited popup blocked?”, because the answer is invariably “yes” — all the major browsers have the popup blocker turned on by default. Best approach is only ever to window.open() in response to a direct click, which is almost always allowed.
HI
I modified the solutions described above slightly and think that it is working for Chrome at least.
My solution is made to detect if popup is blocked when the main page is opened, not when popup is opened, but i am sure there are some people that can modify it.:-)
The drawback here is that the popup-window is displayed for a couple of seconds (might be possible to shorten a bit) when there is no popup-blocker.
I put this in the section of my 'main' window
<script type="text/JavaScript" language="JavaScript">
var mine = window.open('popuptest.htm','popuptest','width=1px,height=1px,left=0,top=0,scrollbars=no');
if(!mine|| mine.closed || typeof mine.closed=='undefined')
{
popUpsBlocked = true
alert('Popup blocker detected ');
if(mine)
mine.close();
}
else
{
popUpsBlocked = false
var cookieCheckTimer = null;
cookieCheckTimer = setTimeout('testPopup();', 3500);
}
function testPopup()
{
if(mine)
{
if(mine.test())
{
popUpsBlocked = false;
}
else
{
alert('Popup blocker detected ');
popUpsBlocked = true;
}
mine.close();
}
}
</script>
The popuptest looks like this:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>Popup test</title>
<script type="text/javascript" language="Javascript">
function test() {if(window.innerHeight!=0){return true;} else return false;}
</script>
</head>
<body>
</body>
</html>
As i call the test-function on the popup-page after 3500 ms the innerheight has been set correctly by Chrome.
I use the variable popUpsBlocked to know if the popups are displayed or not in other javascripts.
i.e
function ShowConfirmationMessage()
{
if(popUpsBlocked)
{
alert('Popups are blocked, can not display confirmation popup. A mail will be sent with the confirmation.');
}
else
{
displayConfirmationPopup();
}
mailConfirmation();
}
function openPopUpWindow(format)
{
var win = window.open('popupShow.html',
'ReportViewer',
'width=920px,height=720px,left=50px,top=20px,location=no,directories=no,status=no,menubar=no,toolbar=no,resizable=1,maximize:yes,scrollbars=0');
if (win == null || typeof(win) == "undefined" || (win == null && win.outerWidth == 0) || (win != null && win.outerHeight == 0) || win.test == "undefined")
{
alert("The popup was blocked. You must allow popups to use this site.");
}
else if (win)
{
win.onload = function()
{
if (win.screenX === 0) {
alert("The popup was blocked. You must allow popups to use this site.");
win.close();
}
};
}
}
As far as I can tell (from what I've tested) Chrome returns a window object with location of 'about:blank'.
So, the following should work for all browsers:
var newWin = window.open(url);
if(!newWin || newWin.closed || typeof newWin.closed=='undefined' || newWin.location=='about:blank')
{
//POPUP BLOCKED
}

Detecting when an iframe gets or loses focus

What's the correct way of detecting when an iframe gets or loses focus (i.e. will or will not receive keyboard events)? The following is not working in Fx4:
var iframe = /* my iframe */;
iframe.addEventListener("focus", function() { /* never gets called */ }, false);
You can poll "document.activeElement" to determine if it matches the iframe. Polling isn't ideal, but it works:
function checkFocus() {
if(document.activeElement == document.getElementsByTagName("iframe")[0]) {
console.log('iframe has focus');
} else {
console.log('iframe not focused');
}
}
window.setInterval(checkFocus, 1000);
i know it's old, but i also had the same problem.
i ended up using this little pice of code:
$(document).on('focusout', function(){
setTimeout(function(){
// using the 'setTimout' to let the event pass the run loop
if (document.activeElement instanceof HTMLIFrameElement) {
// Do your logic here..
}
},0);
});
Turns out it's not really possible. I had to change the logic of my page to avoid the need of tracking if the iframe has focus.
How to check when an iframe has been clicked in or out of as well as hover-state.
Note: I would highly recommend you don't choose a polling method and go with an event driven method such as this.
Disclaimer
It is not possible to use the focus or blur events directly on an iframe but you can use them on the window to provide an event driven method of checking the document.activeElement. Thus you can accomplish what you're after.
Although we're now in 2018, my code is being implemented in GTM and tries to be cross browser compatible back to IE 11. This means there's more efficient code if you're utilizing newer ES/ECMAScript features.
Setup
I'm going to take this a few steps further to show that we can also get the iframe's src attribute as well as determine if it's being hovered.
Code
You would ideally need to put this in a document ready event, or at least encapsulate it so that the variables aren't global [maybe use an IIFE]. I did not wrap it in a document ready because it's handled by GTM. It may also depend where you place this or how you're loading it such as in the footer.
https://jsfiddle.net/9285tbsm/9/
I have noticed in the JSFiddle preview that it's already an iframe, sometimes you have to focus it first before events start to capture. Other issues can be that your browser window isn't yet focused either.
// Helpers
var iframeClickedLast;
function eventFromIframe(event) {
var el = event.target;
return el && el.tagName && el.tagName.toLowerCase() == 'iframe';
}
function getIframeSrc(event) {
var el = event.target;
return eventFromIframe(event) ? el.getAttribute('src') : '';
}
// Events
function windowBlurred(e) {
var el = document.activeElement;
if (el.tagName.toLowerCase() == 'iframe') {
console.log('Blurred: iframe CLICKED ON', 'SRC:', el.getAttribute('src'), e);
iframeClickedLast = true;
}
else {
console.log('Blurred', e);
}
}
function windowFocussed(e) {
if (iframeClickedLast) {
var el = document.activeElement;
iframeClickedLast = false;
console.log('Focussed: iframe CLICKED OFF', 'SRC:', el.getAttribute('src'), e);
}
else {
console.log('Focussed', e);
}
}
function iframeMouseOver(e) {
console.log('Mouse Over', 'SRC:', getIframeSrc(e), e);
}
function iframeMouseOut(e) {
console.log('Mouse Out', 'SRC:', getIframeSrc(e), e);
}
// Attach Events
window.addEventListener('focus', windowFocussed, true);
window.addEventListener('blur', windowBlurred, true);
var iframes = document.getElementsByTagName("iframe");
for (var i = 0; i < iframes.length; i++) {
iframes[i].addEventListener('mouseover', iframeMouseOver, true);
iframes[i].addEventListener('mouseout', iframeMouseOut, true);
}
I have solved this by using contentWindow instead of contentDocument.
The good thing about contentWindow is
it works also in case user clicks another window (another application) or another browser tab. If using activeElement, if user clicks away from the entire window to go to another application, then that logic still think the iframe is in focus, while it is not
and we don't need to poll and do a setInterval at all. This uses the normal addEventListener
let iframe = document.getElementsByTagName("iframe")[0];
// or whatever way you do to grab that iFrame, say you have an `id`, then it's even more precise
if(iframe){
iframeWindow = iframe.contentWindow;
iframeWindow.addEventListener('focus', handleIframeFocused);
iframeWindow.addEventListener('blur', handleIframeBlurred);
}
function handleIframeFocused(){
console.log('iframe focused');
// Additional logic that you need to implement here when focused
}
function handleIframeBlurred(){
console.log('iframe blurred');
// Additional logic that you need to implement here when blurred
}
This solution is working for me on both mobile and desktop:
;(function pollForIframe() {
var myIframe = document.querySelector('#my_iframe');
if (!myIframe) return setTimeout(pollForIframe, 50);
window.addEventListener('blur', function () {
if (document.activeElement == myIframe) {
console.log('myIframe clicked!');
}
});
})();
The solution is to inject a javascript event on the parent page like this :
var script = document.createElement('script');
script.type = 'text/javascript';
script.innerHTML =
"document.addEventListener('click', function()" +
"{ if(document.getElementById('iframe')) {" +
// What you want
"}});";
head.appendChild(script);
Here is the code to Detecting when an iframe gets or loses focus
// This code can be used to verify Iframe gets focus/loses.
function CheckFocus(){
if (document.activeElement.id == $(':focus').context.activeElement.id) {
// here do something
}
else{
//do something
}
}
A compact function that accepts callbacks you want to run when iframe gets or loses focus.
/* eslint-disable no-unused-vars */
export default function watchIframeFocus(onFocus, onBlur) {
let iframeClickedLast;
function windowBlurred(e) {
const el = document.activeElement;
if (el.tagName.toLowerCase() == 'iframe') {
iframeClickedLast = true;
onFocus();
}
}
function windowFocussed(e) {
if (iframeClickedLast) {
iframeClickedLast = false;
onBlur();
}
}
window.addEventListener('focus', windowFocussed, true);
window.addEventListener('blur', windowBlurred, true);
}
This might work
document.addEventListener('click', function(event) {
var frame= document.getElementById("yourFrameID");
var isClickInsideFrame = frame.contains(event.target);
if (!isClickInsideFrame ) {
//exec code
}
});

jQuery .ready in a dynamically inserted iframe

We are using jQuery thickbox to dynamically display an iframe when someone clicks on a picture. In this iframe, we are using galleria a javascript library to display multiple pictures.
The problem seems to be that $(document).ready in the iframe seems to be fired too soon and the iframe content isn't even loaded yet, so galleria code is not applied properly on the DOM elements. $(document).ready seems to use the iframe parent ready state to decide if the iframe is ready.
If we extract the function called by document ready in a separate function and call it after a timeout of 100 ms. It works, but we can't take the chance in production with a slow computer.
$(document).ready(function() { setTimeout(ApplyGalleria, 100); });
My question: which jQuery event should we bind to to be able to execute our code when the dynamic iframe is ready and not just it's a parent?
I answered a similar question (see Javascript callback when IFRAME is finished loading?).
You can obtain control over the iframe load event with the following code:
function callIframe(url, callback) {
$(document.body).append('<IFRAME id="myId" ...>');
$('iframe#myId').attr('src', url);
$('iframe#myId').load(function() {
callback(this);
});
}
In dealing with iframes I found good enough to use load event instead of document ready event.
Using jQuery 1.3.2 the following worked for me:
$('iframe').ready(function() {
$('body', $('iframe').contents()).html('Hello World!');
});
REVISION:!
Actually the above code sometimes looks like it works in Firefox, never looks like it works in Opera.
Instead I implemented a polling solution for my purposes. Simplified down it looks like this:
$(function() {
function manipIframe() {
el = $('body', $('iframe').contents());
if (el.length != 1) {
setTimeout(manipIframe, 100);
return;
}
el.html('Hello World!');
}
manipIframe();
});
This doesn't require code in the called iframe pages. All code resides and executes from the parent frame/window.
In IFrames I usually solve this problem by putting a small script to the very end of the block:
<body>
The content of your IFrame
<script type="text/javascript">
//<![CDATA[
fireOnReadyEvent();
parent.IFrameLoaded();
//]]>
</script>
</body>
This work most of the time for me. Sometimes the simplest and most naive solution is the most appropriate.
Following DrJokepu's and David Murdoch idea I implemented a more complete version.
It requires jQuery on both the parent and iframe and the iframe to be in your control.
iframe code:
var iframe = window.frameElement;
if (iframe){
iframe.contentDocument = document;//normalization: some browsers don't set the contentDocument, only the contentWindow
var parent = window.parent;
$(parent.document).ready(function(){//wait for parent to make sure it has jQuery ready
var parent$ = parent.jQuery;
parent$(iframe).trigger("iframeloading");
$(function(){
parent$(iframe).trigger("iframeready");
});
$(window).load(function(){//kind of unnecessary, but here for completion
parent$(iframe).trigger("iframeloaded");
});
$(window).unload(function(e){//not possible to prevent default
parent$(iframe).trigger("iframeunloaded");
});
$(window).on("beforeunload",function(){
parent$(iframe).trigger("iframebeforeunload");
});
});
}
parent test code:
$(function(){
$("iframe").on("iframeloading iframeready iframeloaded iframebeforeunload iframeunloaded", function(e){
console.log(e.type);
});
});
Found the solution to the problem.
When you click on a thickbox link that open a iframe, it insert an iframe with an id of TB_iframeContent.
Instead of relying on the $(document).ready event in the iframe code, I just have to bind to the load event of the iframe in the parent document:
$('#TB_iframeContent', top.document).load(ApplyGalleria);
This code is in the iframe but binds to an event of a control in the parent document. It works in FireFox and IE.
This function from this answer is the best way to handle this as $.ready explicitly fails for iframes. Here's the decision not to support this.
The load event also doesn't fire if the iframe has already loaded. Very frustrating that this remains a problem in 2020!
function onIframeReady($i, successFn, errorFn) {
try {
const iCon = $i.first()[0].contentWindow,
bl = "about:blank",
compl = "complete";
const callCallback = () => {
try {
const $con = $i.contents();
if($con.length === 0) { // https://git.io/vV8yU
throw new Error("iframe inaccessible");
}
successFn($con);
} catch(e) { // accessing contents failed
errorFn();
}
};
const observeOnload = () => {
$i.on("load.jqueryMark", () => {
try {
const src = $i.attr("src").trim(),
href = iCon.location.href;
if(href !== bl || src === bl || src === "") {
$i.off("load.jqueryMark");
callCallback();
}
} catch(e) {
errorFn();
}
});
};
if(iCon.document.readyState === compl) {
const src = $i.attr("src").trim(),
href = iCon.location.href;
if(href === bl && src !== bl && src !== "") {
observeOnload();
} else {
callCallback();
}
} else {
observeOnload();
}
} catch(e) {
errorFn();
}
}
Basically what others have already posted but IMHO a bit cleaner:
$('<iframe/>', {
src: 'https://example.com/',
load: function() {
alert("loaded")
}
}).appendTo('body');
Try this,
<iframe id="testframe" src="about:blank" onload="if (testframe.location.href != 'about:blank') testframe_loaded()"></iframe>
All you need to do then is create the JavaScript function testframe_loaded().
I'm loading the PDF with jQuery ajax into browser cache. Then I create embedded element with data already in browser cache. I guess it will work with iframe too.
var url = "http://example.com/my.pdf";
// show spinner
$.mobile.showPageLoadingMsg('b', note, false);
$.ajax({
url: url,
cache: true,
mimeType: 'application/pdf',
success: function () {
// display cached data
$(scroller).append('<embed type="application/pdf" src="' + url + '" />');
// hide spinner
$.mobile.hidePageLoadingMsg();
}
});
You have to set your http headers correctly as well.
HttpContext.Response.Expires = 1;
HttpContext.Response.Cache.SetNoServerCaching();
HttpContext.Response.Cache.SetAllowResponseInBrowserHistory(false);
HttpContext.Response.CacheControl = "Private";
This was the exact issue I ran into with our client. I created a little jquery plugin that seems to work for iframe readiness. It uses polling to check the iframe document readyState combined with the inner document url combined with the iframe source to make sure the iframe is in fact "ready".
The issue with "onload" is that you need access to the actual iframe being added to the DOM, if you don't then you need to try to catch the iframe loading which if it is cached then you may not. What I needed was a script that could be called anytime, and determine whether or not the iframe was "ready" or not.
Here's the question:
Holy grail for determining whether or not local iframe has loaded
and here's the jsfiddle I eventually came up with.
https://jsfiddle.net/q0smjkh5/10/
In the jsfiddle above, I am waiting for onload to append an iframe to the dom, then checking iframe's inner document's ready state - which should be cross domain because it's pointed to wikipedia - but Chrome seems to report "complete". The plug-in's iready method then gets called when the iframe is in fact ready. The callback tries to check the inner document's ready state again - this time reporting a cross domain request (which is correct) - anyway it seems to work for what I need and hope it helps others.
<script>
(function($, document, undefined) {
$.fn["iready"] = function(callback) {
var ifr = this.filter("iframe"),
arg = arguments,
src = this,
clc = null, // collection
lng = 50, // length of time to wait between intervals
ivl = -1, // interval id
chk = function(ifr) {
try {
var cnt = ifr.contents(),
doc = cnt[0],
src = ifr.attr("src"),
url = doc.URL;
switch (doc.readyState) {
case "complete":
if (!src || src === "about:blank") {
// we don't care about empty iframes
ifr.data("ready", "true");
} else if (!url || url === "about:blank") {
// empty document still needs loaded
ifr.data("ready", undefined);
} else {
// not an empty iframe and not an empty src
// should be loaded
ifr.data("ready", true);
}
break;
case "interactive":
ifr.data("ready", "true");
break;
case "loading":
default:
// still loading
break;
}
} catch (ignore) {
// as far as we're concerned the iframe is ready
// since we won't be able to access it cross domain
ifr.data("ready", "true");
}
return ifr.data("ready") === "true";
};
if (ifr.length) {
ifr.each(function() {
if (!$(this).data("ready")) {
// add to collection
clc = (clc) ? clc.add($(this)) : $(this);
}
});
if (clc) {
ivl = setInterval(function() {
var rd = true;
clc.each(function() {
if (!$(this).data("ready")) {
if (!chk($(this))) {
rd = false;
}
}
});
if (rd) {
clearInterval(ivl);
clc = null;
callback.apply(src, arg);
}
}, lng);
} else {
clc = null;
callback.apply(src, arg);
}
} else {
clc = null;
callback.apply(this, arguments);
}
return this;
};
}(jQuery, document));
</script>

Categories

Resources