Develop Reference

MomentJS, how to ignore user's local timezone, and use

Here's the scenario:
1- User opens the website, and enters 07:00 am using a dropdown field, which will give me this :
// 1578600000000 => Save to DB
// Fri Jan 10 2020 07:00:00 GMT+1100 (Australian Eastern Daylight Time)
The user himself is in Sydney, which means his local clock is on GMT+1100
However, he wants to represent this time as Asia/Tehran time, because that's where he's going to be tomorrow. So essentially, he wants me to completely ignore his local time and see him as if he's in Asia/Tehran. So when he's in Tehran tomorrow, he can see his calendar has 07:00am.
On the other hand, are the people all over the world who will see his available time, let's say from Australia/Perth.
I thought something like the below work, as per momentJS documentation, but it doesn't.
First, convert the timezone to Asia/Tehran, which is the user's desired place:
const desiredTimeZone = 'Asia/Tehran';
let OriginalDesired = moment.tz(1578600000000,desiredTimeZone);
Then, when representing it to the people in Australia/Perth make sure it's in their timezone
const PerthTimeZone = 'Australia/Perth`; // this is dynamic, can be anything
OriginalDesired.clone().tz(PerthTimeZone);
I naively thought this should work. But I noticed the original timestamp 1578600000000 is a UTC timestamp, meaning it's not really 07:00am, it's actually 20:00pm, because Javascript
has subtracted 11 hours, which is the very original user's local timezone's offset, from the user entry.
I managed to work around it by adding and subtracting the offset in a dramatic way, but it only works in one scenario.
const originalTime = 1578600000000;
const LocalAdjustment = moment(originalTime).tz("Australia/Sydney").utcOffset() * 60000;
const DesiredAdjustment = moment(originalTime).tz("Asia/Tehran").utcOffset() * 60000;
const newUTC = originalTime + LocalAdjustment - DesiredAdjustment;
And when representing this to the user's in Tehran
moment(newUTC).tz("Asia/Tehran").format('hh:mma'); // 07:00am.
I know this is probably stupid and obviously only works in one scenario, but is this the right path that I'm going? or is there an easier way?
By the way, all the calculations are on my server, which is 'UTC'.

You said:
1- User opens the website, and enters 07:00 am using a dropdown field, which will give me this : // 1578600000000 ...
You've already lost. If the local time zone is not relevant, then don't write code that assumes that it is.
In other words, you probably have something along the lines of:
moment("2020-01-10 07:00")
Instead you should have something like:
moment.tz("2020-01-10 07:00", "Asia/Tehran")
Or rather, you should simply send "2020-01-10 07:00" and "Asia/Tehran" to your database, then later retrieve them and pass them to moment-timezone when you need to know what moment that represents.
As to your other approach, it's generally not a good idea to add or subtract time zone offsets from timestamps. Unix timestamps are inherently UTC based. Adding or subtracting will produce a different moment in time, not adjust for time zone.
Consider that there's also a slim (but not impossible) chance that the offsets returned by your code are incorrect, as they would have to be shifted before being looked up. In other words, Tehran was at UTC+3:30 on the date in question, so the timestamp passed would have to be adjusted by 3 hours 3 minutes before being passed to the moment constructor. This leads to circular logic, and is difficult to resolve. It will show up for timestamps near transitions (either for DST, or for changes to standard time for a particular time zone).

Using moment.utc() incorrectly converting the date into utc format of "days" format-Moment Javascript

I'm using moment library to convert date into a utc format. here is my date string:
var dateString = "2019-01-31T11:33:16.952+0000";
new Date("2019-01-31T11:33:16.952+0000") // o/p: Thu Jan 31 2019 03:33:16 GMT-0800 (Pacific Standard Time)
since this date is less than a week from today's date, I'm trying to display a text saying "n days ago" instead of actual date. But for some reason I'm getting a future date displayed as "6 days ago" when I do this:
moment.utc("2019-01-31T11:33:16.952+0000").local().fromNow() // shouldnt this display "5 days ago"??
Not sure why moment is not converting the date correctly, any ideas what could be wrong here?

I guess(Considering use of local() converts to your local timezone so time is deducted because you might be in -ve TimeZone) this answer is a solution you're expecting:
Ideally, you would want to pass a UTC timestamp from your server to
the client. That doesn't mean you have to switch your whole server
over to UTC, it just means that you would convert from the time in
your database to UTC on the server before sending it over the web.
Sure, it would be even better if you actually stored times in UTC, but
you said you aren't in a position to make that sort of change right
now. But let's just work off the assumption that you can't change
anything at all on the server.
We'll also assume that your server is fixed to the UTC-07:00 offset.
In real life, this would only be true for places like Arizona that
don't follow daylight saving time. So if you are in Los Angeles and
are in Pacific Time, then some of your data is based on UTC-07:00, but
some of it is based on UTC-08:00. That requires a lot more work if you
want to do it in JavaScript.
Let's also assume that the input is already a string in ISO8601
format. (If it's not, then let me know and I will adjust this code.)
var s = "2013-09-11 18:00:00"; // from action.timeStamp
var actionTime = moment(s + "-07:00", "YYYY-MM-DD HH:mm:ssZ");
var timeAgo = actionTime.fromNow(); The reason your other code didn't
work is because in the first line, you are affected by the time zone
of the browser. The zone setter in the second line just changes the
zone for formatting, not changing the actual moment in time.
Also, when you dump a moment to the console for debugging, make sure
you format it for output. Otherwise you are just looking at its
internal property values, which may or may not make sense directly.

How to change only timezone without modifying the time in momentz

I have date and time in 2016-06-21T10:00:00-07:00 format which represets 06/21/2016 5 PM in PST, I just want to change this to 06/21/2016 5 PM in EST and vice versa. How can I do it with momentz?
JSFiddle
debugger;
var dateTime = moment('2016-06-21T10:00:00-07:00');
var newDateTime = dateTime.clone();
newDateTime.tz('US/Eastern');
//dateTime = dateTime.utc();
console.log(dateTime.utcOffset());
console.log(newDateTime.utcOffset());
console.log(newDateTime.utcOffset() - dateTime.utcOffset());
//console.log(utc.format());
dateTime = dateTime.add(newDateTime.utcOffset(), 'minutes');
console.log(dateTime.format());
console.log(new Date(Date.parse(dateTime.format())).toJSON());
EDIT:
given input = 2016-06-21T08:00:00-07:00 (PST)
expected output = 2016-06-21T08:00:00-04:00 (EST)
So when I convert that to UTC then it should become
2016-06-22T15:00:00Z for PST
2016-06-22T12:00:00Z for EST

I think you are confused about how ISO8601 format works. This format always represents local time with a time zone offset. Thus 2016-06-21T10:00:00-07:00 represents June 21 2016 at 10 AM in a timezone that is currently UTC-7 (this could be US pacific, among many others).
It sounds like you want to take the local time, but put it in a new timezone. This opens up some interesting questions about why you are receiving the date in the format that you are. If the date is meant to be interpreted as an exact point on the global timeline, then the format you are receiving it in is good. If however, the date is meant to be interpreted as a local time (not relative to UTC), it might be worth considering the possibility that the format of the date needs to be changed at the source. For instance, if you are making an ajax request to an API, and it is returning a date in this format, but that date actually has no relationship to UTC, it would be good to try to change that API to only send the local time (without the offset). If you were able to do that, then the following code would work:
moment.tz('2016-06-21T10:00:00', 'America/New_York').format()
"2016-06-21T10:00:00-04:00"
If you are unable to do that, or if the date is meant to be interpreted as an exact point on the global timeline, but you wish to ignore that in your specific use case, that can be done. You will need to specify a parse format that ignores the timezone offset on your initial time stamp. The code would be as follows:
moment.tz('2016-06-21T10:00:00-07:00', 'YYYY-MM-DDTHH:mm:ss', 'America/New_York').format()
"2016-06-21T10:00:00-04:00"
You might benefit from the material in this blog post, as it covers how ISO8601 format works, and how all of moment's constructor functions work.

Checkout moment().utcOffset() You can pass in the offset as parameter to this function and the date would use that locale.
Assuming you know beforehand the utcOffsets required which in your case are -420 and -240 or -300(EST with DayLightSaving). Below can be done
var dateTime = moment('2016-06-21T10:00:00-07:00');
dateTime.utcOffset(-420).format();
"2016-06-21T10:00:00-07:00"
dateTime.utcOffset(-240).format()
"2016-06-21T13:00:00-04:00"
NOTE: With -04:00, it should 13:00:00 and not 07:00:00 - http://www.timeanddate.com/time/zones/est
EDIT: This answer was posted to the earlier version of question, where same time was needed in different timezones. If it is incorrect, kindly please elaborate on how it is.
Thanks!

Using Moment.js like PHP's date and strtotime

I'm a typically server side developer feeling a bit like a fish out of water trying to display time values on the front end. How can I get behavior like PHP's date() and strtotime() functions out of moment.js? I just want a unix timestamp to appear in H:i:s format, and vice versa.
So far I've tried the following, from existing example code and the documentation:
moment(timestamp).format(H:i:s);
moment().duration(timestamp).format(H:i:s);
moment.unix(timestamp).format(h:mm:ss);
moment(formatted,'H:i:s');
Not a SINGLE one of which has worked properly. This may get flagged as duplicate since there are plenty of moment.js questions out there, but I don't know whether it's been updates to the library itself or slightly different context, I have not found one existing solution that has worked for me.
Anybody have any suggestions for these two simple tasks?
EDIT:
I've distilled two different problems out of this. One is that functions the moment docs say should work are giving weird values:
moment(1437462000).format('h:mm:ss')
for instance, which should return 7:00:00 utc, returns 10:17:42. This can be fixed in this case by using moment.unix(1437462000).utc().format('h:mm:ss') instead, but this leads into the second problem - the .utc() function seems to get ignored when converting back from a date into a timestamp:
timestamp = moment(formatted,'DD/MM/YYYY H:m:s').utc().unix();
will still return a timezone corrected value (in my case this is incorrect by several hours since the formatted time in question has nothing to do with the client computer) regardless of whether the .utc() function is included or not.

A few things you should realize:
Unix timestamps should always in terms of UTC. They are never adjusted for time zone in numerical form. If they're adjusted for time zone, that's done during the interpretation of the number, not in its representation.
While traditionally a "Unix Timestamp" is in terms of seconds, many environments use milliseconds instead. PHP's date timestamps are based on seconds, while moment and JavaScript's Date object both use milliseconds by default. Using the moment.unix function will let you pass seconds, and is identical to just multiplying the timestamp by 1000.
Moment has two built-in modes, local and UTC. The default mode is local. It doesn't matter what input you provide, if you don't specify UTC, the moment is adjusted to local. To specify UTC, you use the utc function. There are two forms of the function:
moment.utc(input) // parsing form
moment(input).utc() // conversion form
Both forms take some input and result in a moment in UTC mode. The difference is in how the input is interpreted. In either case, if the input value is unambiguous, the result is the same. For strings, that means the input would contain either a Z (from ISO8601), or a UTC-based offset. All other forms are ambiguous. For example, if I pass "2015-11-08 01:23:45", I will get different results depending on whether I interpret that string as local time or as UTC.
For numbers, they are always interpreted as milliseconds in UTC. However, if you use moment(number) without then calling .utc() then the moment is left in local mode, so any output will display as local time.
When you call moment.unix(input), the input is a number of seconds, but the moment is left in local mode. So to display the UTC time, you would use moment.unix(input).utc().
If your pre-recorded timestamps from your other system are in numeric form, but have been adjusted away from UTC, then they are incorrect. You have bad data, and Moment can't help you unless you know specifically how they have deviated and you write code to counteract that.
Moment's formatters are case sensitive. M is months, m is minutes. H is hours on a 24-hour clock, h is hours on a 12-hour clock. Use two consecutive letters when you want to include zero-padding. Example, HH:mm:ss for 13:02:03 vs. h:m:s for 1:2:3.
Moment's X formatter does not care which mode the moment is in. It will always emit seconds in UTC. Likewise, the x formatter returns milliseconds in UTC, as does moment.valueOf().
Also, your last example:
moment.unix(1437462000).utc().format()
Returns "2015-07-21T07:00:00+00:00" - which I believe is the value you expected.
You also get the same original timestamp regardless of which of these you try:
moment.unix(1437462000).utc().format("X") // "1437462000"
moment.unix(1437462000).format("X") // "1437462000"
moment.unix(1437462000).utc().unix() // 1437462000
moment.unix(1437462000).unix() // 1437462000

For anyone who comes in and is still looking for direct PHP equivalents for date() and strtotime(), here are the ones I ended up using. Matching up to php basically means just completely ignoring any kind of local time information by making sure everything is in UTC. That task is a little different between the timestamp->date and date->timestamp cases, though, so you have to be careful.
date()
Converting a timestamp to formatted date without any client timezone correction
var formatted = moment.unix(timestamp).utc().format('h:mm:ss');
strtotime()
Converting a UTC formatted date back to a timestamp without correcting it to local time:
var new_timestamp = moment.utc(formatted_utc,'DD/MM/YYYY H:m:s').format('X')
//where 'DD/MM/YYYY H:m:s' is the formatted date's format, and
//'X' outputs a unix timestamp without milliseconds.
Notes:
Do not use moment() with parenthesis in the calls:
moment().utc(date,format) will return local time values, not your
input.
Moment.js does not like the use of 'i' for minutes in the formatting,
unlike php.

momentjs: how to get the date in a specific timezone

In a nutshell I want moment to respect server's timezone. I've set my machine's timezone to Alaska but I'm passing a Brisbane timezone string to moment. Now I need moment.toDate to return a date instance in the same timezone as the one I pass in the moment constructor; e.g.
m = moment("2016-11-20T08:00:00+10:00")
m.format() // "2016-11-20T08:00:00+10:00"
m.toDate() // Sat Nov 19 2016 13:00:00 GMT-0900 (AKST)
I want to get a Date instance from moment that's in the input timezone; e.g. somehow get toDate to return Sun Nov 20 2016 08:00:00 GMT+1000 (AEST).
FWIW I have tried the same code with and without moment.tz.setDefault and while it correctly changes the format result, toDate always uses the machine's timezone!
Update
The reason I need this behaviour is that some JavaScript libraries and controls don't understand moment and only work with Date and the time/date gets skewed when presented back by them. One example, the one I'm currently dealing with, is jQuery UI date picker control. I want the date picker to show the current date as it's on the server (or on a specific timezone).
Thanks in advance.

The Date object represents the time in UTC internally, and can only use the time zone of the machine its running on when projected.
There's absolutely no way to produce a Date object that uses an arbitrary time zone. Any examples you may come across that try to manipulate the Date object (such by adding or subtracting time zone offsets) are fundamentally flawed.
Moment itself has great time zone support, including the moment-timezone extension for working with named time zones instead of just time zone offsets. But once you go back to a Date object - you're back at the mercy of the behavior of that object.
Sorry, but there's no way to achieve what you are asking. Perhaps you could elaborate as to why you wanted to do this, and I could recommend a workaround.
Update: With regards to your update, usually there is a mechanism for getting the value from a date picker as text, rather than as a date object. With the example of the jQuery UI date picker control, the onSelect event gives it to you as text already, or you can simply call .val() instead of .datepicker('getDate') to get the text out of the field. Once you have a textual value, you can then parse it with moment however you like.
Similarly, when setting the value, you don't necessarily need a Date object. You could just set the value of the textbox as a string, or you can pass a string to the setDate function.
In most cases, you won't have to go through a Date object. But if for some reason you do, then you'll need to artificially construct one with something crazy like:
var d = new Date(m.format('YYYY/MM/DD'));
Normally, I'd be against that - but if it's just there to get the pass a value to a UI control, then it's probably ok.

This will get you a moment in the same timezone as the moment string, but toDate is always in the local timezone.
d = "2016-11-20T08:00:00+10:00"
m = moment(d).utcOffset(d)
m.format()
m.toDate()