Question : I have to dynamically display the cell ,and each row must have 3 cell . I want to find how many rows it needed and if user enters 7 the first two row display 3 cell each and third row will only display 1 cell.
code:
var cells = document.getElementsByTagName('td');
var cell = '<td>' + cells[0].innerHTML + '<td>';
//console.log(cell);
document.getElementById('searchBtn').onclick = search;
var NUMPERROW = 3;
function search(){
var num = document.getElementById('searchTxt').value;
//Loop Once per Row.
var htmlStr = '';
for (var i = 0; i < num ; i = i + NUMPERROW){
//htmlStr += '<tr>' + cell + cell + cell + '<tr>';
if(num - i >= NUMPERROW){
htmlStr += newRow(NUMPERROW);
}else{// less than 3 to display
htmlStr += newRow(num - i);
}
}
document.getElementById('thumbnails').innerHTML = htmlStr;
}
/*
* Returns the html for a new row.
* numToAdd: the number of cells to add for this row.
*/
function newRow(cellsToAdd){
}
If I understood your question correctly, you can get the number of cells you need to add by using
newRow = NUMPERROW - (num % NUMPERROW)
where % is the modulo operator: 7 % 3 is the reminder of 7 / 3, which is 1
Related
I have maybe weird question, but it is very important to me to solve this.
I have table wich is not with stable amount of rows and columns, so i put the += operator to create cells, rows and etc. Now i need to identify every cell, but i don't understand how i can do it in this situation.
function drawBoard(board) {
var t="";
t="<table border: 2px >";
var x,y;
for(x=0; x<board.length; x++){
t+="<tr>";
for(y=0; y<board.length; y++){
t+="<td class='tablecell' onclick=''>X</td>"
}
t+="</tr>";
}
t+="</table>";
}
By identify a cell I'm assuming you would like to reference them later in different part of the code.
You could achieve it by giving your rows and cells classes and/or ids.
For a row, for example:
t += '<tr id="tr-' + x + '">';
for a cell
t += '<td class="tablecell tr-' + x + ' col-' + y + '" onclick="" id="td-' + x + '-' + y + '">X</td>'
Then rows can be referenced by #tr-x and cells #tr-x > td, and all specific columnd .col-y
As Matheus Avellar mentioned, added id to a cell as well in case you want to reference a particular cell on a grid using #td-x-y
You are able to use:
const cells = document.getElementsByClassName('tablecell')
Or you can collect every cell on the stage of creation, for example:
const cells = [];
for (let i = 0; i < board.length){
for (let j = 0; j < board.length){
const cell = document.createElement('td');
cells.push(cell);
}
}
You can set the id of each one equal to your 'y' variable.
Something like:
function drawBoard(board) {
var t = "";
t = "<table border: 2px >";
var x, y;
for (x = 0; x < board.length; x++) {
t += "<tr>";
for (y = 0; y < board.length; y++) {
t += `<td id="table-${y}" class='tablecell' onclick=''>X</td>`
}
t += "</tr>";
}
t += "</table>";
}
Using a bit of ES6 template literals, you can set tie your ID to your 'Y' variable since it's an incrementing number.
I'm quite new both to programming and to this community, I'll try to be as clear as possible. I need to create an HTML table 16x16 with a button in every cell that displays a different image - a smiley - per cell, without ever showing the same smiley for different cells. I'm a bit stuck and I would also appreciate a hint, just to try and move on on my own. Thanks! Here is my code that creates the table and displays the image:
function displayImage(){
var num = Math.floor(Math.random() * 256);
document.canvas.src = '../../output/'+ imagesArray[num]+ '.png';
document.getElementById("YourImage").style.visibility = "visible";
}
for(var r = 0; r < rows;r++)
{
table += '<tr>';
for(var c= 0; c< cols;c++)
{
table += '<td style="width:50px" id="(i++)">' + '<button type="button" onclick="displayImage()">' +
"show me" + '</button>' + '</td>';
}
table += '</tr>';
}
document.write('<table id="grid" border="1">' + table + '</table>');
(ImagesArray is not shown for readability but it simply collects all 256 binary combinations).
The problem with this is that each time I click on a button it displays a random image and if I click again on the same button it shows another one, while I'd like it to show me always the same image for the same button.
NOTE: I cannot delete the button afterwards or similar tricks, as the player (it's an oTree experiment) needs to be able to go back to a smiley he saw any time.
Thanks a lot for your help!
I would change the point where the random number is generated and advance it from the display function to the initialization of the table.
Create an array with the numbers from 0 to 255. While looping through rows and columns to create the table, pick one random number from that array and assign it to the button's id attribute. Be sure to remove this number from the array, so it can't be used again for the following buttons. This way every of the 256 numbers will be used, but in random order. When a user clicks a button, with displayImage(this.id) the button's id is used as a parameter to call displayImage(). Thus always the same number of the button will be used the fetch the according image.
The code:
// call displayImage() with parameter
function displayImage(num){
document.canvas.src = '../../output/'+ imagesArray[num]+ '.png';
document.getElementById("YourImage").style.visibility = "visible";
}
// create array 'nums' with numbers from 0 to 255 (= rows * cols)
var nums = [];
for (var i = 0; i < (rows * cols); i++) {
nums.push(i);
};
for(var r = 0; r < rows; r++)
{
table += '<tr>';
for(var c = 0; c < cols; c++)
{
// get random index in array 'nums'
var random = Math.floor(Math.random() * nums.length);
// assign an id to the button with a random number from 'nums' and use this id in displayImage()
table += '<td style="width:50px" id="(i++)">' + '<button id="' + nums[random] + '" type="button" onclick="displayImage(this.id)">' +
"show me" + '</button>' + '</td>';
// remove the already used random number from 'nums'
nums.splice(random, 1);
}
table += '</tr>';
}
document.write('<table id="grid" border="1">' + table + '</table>');
This way you will have the same image connected to every button. It's randomized while creating the table, so the order is different every time you load the page.
I assume you are using HTML5 because only then it is permitted that id attributes consists only of digits.
Note: I don't know what exactly you want to achieve with id="(i++)" when creating the <td> element. The way you do it just names every id with the string (i++) which contradicts the idea that ids should be unique. If you want to name the ids ascending from for example td-0 to td-255 you should change the line to:
table += '<td style="width:50px" id="td-' + (r * rows + c) + '">' + '<button id="' + nums[random] + '" type="button" onclick="displayImage(this.id)">' + "show me" + '</button>' + '</td>';
You can't just use the numbers without adding something like td-, because the buttons already have pure numbers as id.
try this:
var rows = 16, cols = 16;
var table = '';
function shuffle(array) { // shuffle (randomize) array elements
var i = array.length, j, x;
while (i) {
j = Math.random() * i-- | 0;
x = array[i];
array[i] = array[j];
array[j] = x;
}
}
var rNums = new Array(rows * cols);
for (var i = 0; i < rows * cols; i++) {
rNums[i] = i;
}
shuffle(rNums);
function displayImage(num) {
//var num = Math.floor(Math.random() * 256);
document.canvas.src = '../../output/'+ imagesArray[num]+ '.png';
//document.getElementById("canvas").innerHTML = num;
document.getElementById("YourImage").style.visibility = "visible";
}
var i = 0;
for (var r = 0; r < rows; r++) {
table += '<tr>';
for (var c = 0; c < cols; c++) {
table += '<td style="width:50px" id="' + i + '"><button type="button" onclick="displayImage(' + rNums[i] + ')">show me</button></td>';
i++; //go to next element of rNums array
}
table += '</tr>';
}
document.write('<table id="grid" border="1">' + table + '</table>');
I want to produce a table with Javascript. I want to give it a number and that's how many cells are created. There are always to be 3 columns however (3 pictures per row)
Could someone help me out with this? I think I need to use the modulus operator but I am unsure of how to use it correctly.
I do not want any extra cells. I can calculate the rows without issue but I don't want extra cells for those rows if that makes sense. So once the cells have been made that row ends even if it's 1 or 2 cells short.
I have this at the moment:
rows = ?? //Not sure how to calculate this
columns = 3;
str = "";
str += '<table border="1" cellspacing="1" cellpadding="5">';
for(i = 0; i < rows; i++){
str += '<tr>';
for (j = 0; j < columns; j++){
str += '<td>' + (i + j) + '</td>';
}
str += '</tr>';
}
str += '</table>';
Say if u have number of pictures as numPictures:-
Then
var numRows = Math.ceil(numPictures/3);
I hope the following code that what you want.
var numOfPics = 100; // Number of Pictures
var columns = 3, rows = Math.ceil(numOfPics / columns), content = "", count = 1;
content = "<table border='1' cellspacing='1' cellpadding='5'>";
for (r = 0; r < rows; r++) {
content += "<tr>";
for (c = 0; c < columns; c++) {
content += "<td>" + count + "</td>";
if (count == numOfPics)break; // here is check if number of cells equal Number of Pictures to stop
count++;
}
content += "</tr>";
}
content += "</table>";
document.body.innerHTML = content; // insert `content` value into body of page
You know how many cells there are. So you divide the number of cells by the number of columns to get the number of rows. Math.ceil() rounds up in case there are not the exact amount of cells to fill a row.
rows = Math.ceil(total_num_cells / 3);
I've tried everything I can find via google and nothing has worked correctly. Output is just a single row with all the contents of the array listed. What I need is a way to write the contents of an array but after 3 cells, automatically start a new line. I'll post the code I've made below as well as the question. (yes this is from an assignment. :( )
//***(8) place the words in the string "tx_val" in a table with a one pixel border,
//*** with a gray backgound. Use only three cells per row. Empty cells should contain
//*** the word "null". Show the table in the span block with id="ans8"
var count = i % 3;
var nrow = "";
var out = "<table border='1' bgcolor='gray'><tr>"
for (var i=0; i<txArr.length; i++)
{
out += ("<td>" + txArr[i] + "</td>");
count++;
if (count % 3 == 0)
{
nrow += "</tr><tr>";
}
}
document.getElementById('ans8').innerHTML = out + nrow;
you need to print the tr's inside the table (annd add a </table>!):
var count = i % 3; // btw. what's this??
var nrow = "";
var out = "<table border='1' bgcolor='gray'><tr>"
for (var i=0; i<txArr.length; i++)
{
out += "<td>" + txArr[i] + "</td>";
count++;
if (count % 3 == 0)
out += "</tr><tr>";
}
out += "</table>";
document.getElementById('ans8').innerHTML = out;
Rather than try to write out the html, try manipulating the dom. It seems much more straightforward to me. Take a look at the following:
var row = table.insertRow();
msdn
mdc
var cell = row.insertCell();
msdn
mdc
var cellContent = document.createTextNode(txArr[i]);
msdn
mdc
cell.appendChild(cellContent);
msdn
mdc
For deciding when to start a new row, just use the modulus operator (%
msdn
mdc
) against i:
if (i % 3 == 0)
{
row = table.insertRow()
}
You'd end up with something like this:
var container = document.getElementById("ans8");
var t = container.appendChild(document.createElement("table"));
var row;
txArr.forEach(function (item, i)
{
if (i % 3 == 0)
{
row = t.insertRow()
}
row.insertCell().appendChild(document.createTextNode(item));
});
I'll leave a little for you to figure out - border, background color, getting the word "null" in there. It is your homework after all. :-)
Also, for older browsers you'll need to add Array.forEach in yourself.
I prefer using an array over concatination
var html = [];
html.push("<table><tr>");
var i = 0;
for (var k in txArr)
{
if(i>=3){
i=0;
html.push("</tr><tr>");
}
html.push("<td>" + txArr[k] + "</td>");
i++;
}
html.push("</tr></table>");
document.getElementById('ans8').innerHTML = html.join('');
// wrapped in function
function arrayToTable(a,cols){
var html = [];
html.push("<table><tr>");
var i = 0;
for (var k in a)
{
if(i>=cols){
i=0;
html.push("</tr><tr>");
}
html.push("<td>" + a[k] + "</td>");
i++;
}
html.push("</tr></table>");
return html.join('')
}
document.getElementById('ans8').innerHTML = arrayToTable(txArr, 3);
It might be a tad easier to accomplish with something like
buffer = "<table>";
for(var r = 0; r < 10; r++){
buffer += "<tr>";
for(var c = 0; c < 3 ; c++){
buffer += "<td>Cell: " + r + ":" + c + "</td>";
}
buffer += "</tr>";
}
buffer += "</table>";
document.getElementById("ans8").innerHTML = buffer;
That would create a table 30 rows long by 3 columns for each row.
you might be assigning values to "count" too early as you don't know what i is yet. and you are not spitting out the value of nrow anywhere... change it to out.
var count;
var nrow = "";
var out = "<table border='1' bgcolor='gray'><tr>"
for (var i=0; i<txArr.length; i++)
{
out += ("<td>" + txArr[i] + "</td>");
count++;
if (count % 3 == 0)
{
out += "</tr><tr>";
}
}
document.getElementById('ans8').innerHTML = out + nrow;
Basically I would split it up into 3 functions, for readability and maintenance. These functions would consist of creating a cell, a row, and a table. This definitely simplifies reading the code. As I have not tested it, below is an example of what I would do.
function createTableCell(value) {
return value == null? "<td>NULL</td>":"<td>" + value + "</td>";
}
function createTableRow(array) {
var returnValue = "";
for (var i = 0; i < array.length; i++) {
returnValue = returnValue + createTableCell(array[i]);
}
return "<tr>" + returnValue + "</tr>";
}
function arrayToTable(array, newRowAfterNArrayElements) {
var returnValue = "<table>";
for (var i = 0; i < array.length; i = i + newRowAfterNArrayElements) {
returnValue = returnValue + createTableRow(array.split(i, (i + newRowAfterNArrayElements) - 1));
}
return returnValue + "</table>";
}
document.getElementById("ans8").innerHTML = arrayToTable(txArr, 3);
In addition this makes your code much more dynamic and reusable. Suppose you have an array you want to split at every 4 element. Instead of hardcoding that you can simply pass a different argument.
Here's a live example of doing this with DOMBuilder, and of using the same code to generate DOM Elements and an HTML String.
http://jsfiddle.net/insin/hntxW/
Code:
var dom = DOMBuilder.elementFunctions;
function arrayToTable(a, cols) {
var rows = [];
for (var i = 0, l = a.length; i < l; i += cols) {
rows.push(a.slice(i, i + cols));
}
return dom.TABLE({border: 1, bgcolor: 'gray'},
dom.TBODY(
dom.TR.map(rows, function(cells) {
return dom.TD.map(cells);
})
)
);
}
var data = [1, 2, null, 3, null, 4, null, 5, 6];
document.body.appendChild(arrayToTable(data, 3));
document.body.appendChild(
dom.TEXTAREA({cols: 60, rows: 6},
DOMBuilder.withMode("HTML", function() {
return ""+arrayToTable(data, 3);
})
)
);
Yes, you can build from scratch...but there's a faster way. Throw a grid at it. The grid will take data in a string, array, json output, etc and turn it into a proper HTML outputted table and will allow you to extend it with sorting, paging, filtering, etc.
My personal favorite is DataTables, but there are numerous others out there.
Once you get proficient, setting one of these up literally takes 5 minutes. Save your brain power to cure world hunger, code the next facebook, etc....
I'm trying to make a table that has 3 cells to a row, and into those three cells, I have a string that I get from a textbox from a HTML form that I created an array from. I'm using JavaScript to do this, and I have it to where I have each word in their own cell, but if there is an empty cell, it won't create a cell. How can I fill that empty cell with another word like "empty".
This is what I have so far.
arrays=tx_val.split(' ');
table="< table border='1' bgcolor=gray>"
for(x=0;x< arrays.length-2;x=x+3)
{
if(x<arrays.length-2)
{
table=table+"< tr>< td>"+arrays[x]+"< /td> <td>"+arrays[x+1]+
"< /td>< td>"+arrays[x+2]+"</td><td>";
}
else
{
table=table+"< /tr>< /table>"
}
}
|| 'empty'
as in
(arrays[x] || 'empty')
or
var empty = '--empty--';
if(x) table += "<tr><td>" + (arrays[x] || empty) + "</td> " + (arrays[x+1] || empty) + "</td><td>" + (arrays[x+2] || empty) + ""
There are errors in your logic that might be causing you problems:
for(x=0;x< arrays.length-2;x=x+3)
{
if(x<arrays.length-2)
Based on the for loop, the if statement will always evaluate to true. As such, for every iteration, you are adding a table row without an ending tr element and you are adding a table cell without an ending td element. The result will be ill-formed HTML that might not be rendering as you desire, even if you get some 'empty' value put in a cell.
Try this:
arrays = tx_val.split( ' ' );
table = "< table border='1' bgcolor=gray>";
currItem = 0;
for( x = 0; x < Math.ceil( arrays.length / 3 ); x = x + 1 )
{
table = table + "<tr>";
for( y = 0; y < 3; y = y + 1 )
{
if( arrays[currItem] == "" )
{
displayItem = "";
}
else
{
displayItem = arrays[currItem];
}
table = table + "<td>" + displayItem + "</td>";
currItem = currItem + 1;
}
table = table + "</tr>";
}
Basically, I changed the loops to form the table code per row first, then per column.
The outer for loop is the one responsible for adding code for each row. The Math.ceil( arrays.length / 3 ) formula determines the number of rows the table should have depending on the number of values in the array. The inner for loop creates 3 cells for each row.
If you want to change the dimensions of the table want to create you can just change the divisor in the Math.ceil function in the outer loop as well as the number used in the condition in the inner loop ( y < 3 ).